| Age | Commit message (Collapse) | Author |
|---|
|
Wrap execve() in the safe-syscall handling. Although execve() is not
an interruptible syscall, it is a special case: if we allow a signal
to happen before we make the host$ syscall then we will 'lose' it,
because at the point of execve the process leaves QEMU's control. So
we use the safe syscall wrapper to ensure that we either take the
signal as a guest signal, or else it does not happen before the
execve completes and makes it the other program's problem.
The practical upshot is that without this SIGTERM could fail to
terminate the process.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-25-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: expanded commit message to explain in more detail why this is
needed, and add comment about it too]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Use safe_syscall for waitpid, waitid and wait4 syscalls. Note that this
change allows us to implement support for waitid's fifth (rusage) argument
in future; for the moment we ignore it as we have done up til now.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-18-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Adjust to new safe_syscall convention. Add fifth waitid syscall argument
(which isn't present in the libc interface but is in the syscall ABI)]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Restart open() and openat() if signals occur before,
or during with SA_RESTART.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-17-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Adjusted to follow new -1-and-set-errno safe_syscall convention]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Restart read() and write() if signals occur before, or during with SA_RESTART
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-15-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Update to new safe_syscall() convention of setting errno]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
If a signal is delivered immediately before a blocking system call the
handler will only be called after the system call returns, which may be a
long time later or never.
This is fixed by using a function (safe_syscall) that checks if a guest
signal is pending prior to making a system call, and if so does not call the
system call and returns -TARGET_ERESTARTSYS. If a signal is received between
the check and the system call host_signal_handler() rewinds execution to
before the check. This rewinding has the effect of closing the race window
so that safe_syscall will reliably either (a) go into the host syscall
with no unprocessed guest signals pending or or (b) return
-TARGET_ERESTARTSYS so that the caller can deal with the signals.
Implementing this requires a per-host-architecture assembly language
fragment.
This will also resolve the mishandling of the SA_RESTART flag where
we would restart a host system call and not call the guest signal handler
until the syscall finally completed -- syscall restarting now always
happens at the guest syscall level so the guest signal handler will run.
(The host syscall will never be restarted because if the host kernel
rewinds the PC to point at the syscall insn for a restart then our
host_signal_handler() will see this and arrange the guest PC rewind.)
This commit contains the infrastructure for implementing safe_syscall
and the assembly language fragment for x86-64, but does not change any
syscalls to use it.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-14-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM:
* Avoid having an architecture if-ladder in configure by putting
linux-user/host/$(ARCH) on the include path and including
safe-syscall.inc.S from it
* Avoid ifdef ladder in signal.c by creating new hostdep.h to hold
host-architecture-specific things
* Added copyright/license header to safe-syscall.inc.S
* Rewrote commit message
* Added comments to safe-syscall.inc.S
* Changed calling convention of safe_syscall() to match syscall()
(returns -1 and host error in errno on failure)
* Added a long comment in qemu.h about how to use safe_syscall()
to implement guest syscalls.
]
RV: squashed Peters "fixup! linux-user: compile on non-x86-64 hosts"
patch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
If DEBUG_ERESTARTSYS is set restart all system calls once. This
is pure debug code for exercising the syscall restart code paths
in the per-architecture cpu main loops.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-10-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Add comment and a commented-out #define next to the commented-out
generic DEBUG #define; remove the check on TARGET_USE_ERESTARTSYS;
tweak comment message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the Microblaze main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Note that this in passing fixes a bug where we were corrupting
the guest r[3] on sigreturn with the guest's r[10] because
do_sigreturn() was returning env->regs[10] but the register for
syscall return values is env->regs[3].
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-11-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define;
drop whitespace changes]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
All syscall exits on microblaze result in r14 being equal to the
PC we return to, because the kernel syscall exit instruction "rtbd"
does this. (This is true even for sigreturn(); note that r14 is
not a userspace-usable register as the kernel may clobber it at
any point.)
Emulate the setting of r14 on exit; this isn't really a guest
visible change for valid guest code because r14 isn't reliably
observable anyway. However having the code and the comment helps
to explain why it's ok for the ERESTARTSYS handling not to undo
the changes to r14 that happen on syscall entry.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the tilegx main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* return -TARGET_QEMU_ESIGRETURN from sigreturn rather than current R_RE
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Note that this fixes a bug where a sigreturn which happened to have
an errno value in TILEGX_R_RE would incorrectly cause TILEGX_R_ERR
to get set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the CRIS main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-34-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the S390 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-33-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; remove stray double semicolon; drop
TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the M68K main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-32-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the OpenRISC main loop code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
(We don't implement sigreturn on this target so there is no
code there to update.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-31-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the UniCore32 main loop code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
(We don't support signals on this target so there is no sigreturn code
to update.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-30-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the Alpha main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-13-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define;
PC is env->pc, not env->ir[IR_PV]]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the SH4 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-12-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the SPARC main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-9-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the PPC main loop code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
(We already handle TARGET_QEMU_ESIGRETURN.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-8-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the MIPS main loop code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
(We already handle TARGET_QEMU_ESIGRETURN.)
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-7-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the 32-bit and 64-bit ARM main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code on sigreturn
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch any guest CPU state
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-6-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweak commit message; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Update the x86 main loop and sigreturn code:
* on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn
* set all guest CPU state within signal.c code rather than passing it
back out as the "return code" from do_sigreturn()
* handle TARGET_QEMU_ESIGRETURN in the main loop as the indication
that the main loop should not touch EAX
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-5-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Currently we define a QEMU-internal errno TARGET_QEMU_ESIGRETURN
only on the MIPS and PPC targets; move this to errno_defs.h
so it is available for all architectures, and renumber it to 513.
We pick 513 because this is safe from future use as a system call return
value: Linux uses it as ERESTART_NOINTR internally and never allows that
errno to escape to userspace.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-4-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: TARGET_ERESTARTSYS split out into preceding patch, add comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Define TARGET_ERESTARTSYS; like the kernel, we will use this to
indicate that a guest system call should be restarted. We use
the same value the kernel does for this, 512.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
[PMM: split out from the patch which moves and renumbers
TARGET_QEMU_ESIGRETURN, add comment on usage]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Some of the signal handling was a mess with a mixture of tabs and 8 space
indents.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-3-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: just rebased]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
The function do_openat() is not consistent about whether it is
returning a host errno or a guest errno in case of failure.
Standardise on returning -1 with errno set (ie caller has
to call get_errno()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
|
|
Check array bounds in host_to_target_errno() and target_to_host_errno().
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-2-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: Add a lower-bound check, use braces on if(), tweak commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
|
|
staging
X86 queue, 2016-05-23
# gpg: Signature made Mon 23 May 2016 23:48:27 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
* remotes/ehabkost/tags/x86-pull-request:
target-i386: kvm: Eliminate kvm_msr_entry_set()
target-i386: kvm: Simplify MSR setting functions
target-i386: kvm: Simplify MSR array construction
target-i386: kvm: Increase MSR_BUF_SIZE
target-i386: kvm: Allocate kvm_msrs struct once per VCPU
target-i386: Call cpu_exec_init() on realize
target-i386: Move TCG initialization to realize time
target-i386: Move TCG initialization check to tcg_x86_init()
cpu: Eliminate cpudef_init(), cpudef_setup()
target-i386: Set constant model_id for qemu64/qemu32/athlon
pc: Set CPU model-id on compat_props for pc <= 2.4
osdep: Move default qemu_hw_version() value to a macro
target-i386: kvm: Use X86XSaveArea struct for xsave save/load
target-i386: Use xsave structs for ext_save_area
target-i386: Define structs for layout of xsave area
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
migration fixes:
- ensure src block devices continue fine after a failed migration
- fail on migration blockers; helps 9p savevm/loadvm
- move autoconverge commands out of experimental state
- move the migration-specific qjson in migration/
# gpg: Signature made Mon 23 May 2016 18:15:09 BST using RSA key ID 657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit-migration/tags/migration-2.7-1:
migration: regain control of images when migration fails to complete
savevm: fail if migration blockers are present
migration: Promote improved autoconverge commands out of experimental state
migration/qjson: Drop gratuitous use of QOM
migration: Move qjson.[ch] to migration/
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
rng: rename RndRandom to RndRandom
# gpg: Signature made Mon 23 May 2016 16:44:58 BST using RSA key ID 657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit-virtio-rng/tags/rng-2.7-1:
rng-random: rename RndRandom to RngRandom
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
opencores_eth cleanups:
- use mii.h
- reduce stack usage in open_eth_start_xmit.
# gpg: Signature made Mon 23 May 2016 20:14:20 BST using RSA key ID F83FA044
# gpg: Good signature from "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
* remotes/xtensa/tags/20160523-opencores_eth:
hw/net/opencores_eth: Allocating Large sized arrays to heap
hw/net/opencores_eth: use mii.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Inline the function inside kvm_msr_entry_add().
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Simplify kvm_put_tscdeadline_msr() and
kvm_put_msr_feature_control() using kvm_msr_buf and the
kvm_msr_entry_add() helper.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Add a helper function that appends new entries to the MSR buffer
and checks for the buffer size limit.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
We are dangerously close to the array limits in kvm_put_msrs()
and kvm_get_msrs(): with the default mcg_cap configuration, we
can set up to 148 MSRs in kvm_put_msrs(), and if we allow mcg_cap
to be changed, we can write up to 236 MSRs.
Use 4096 bytes for the buffer, that can hold 255 kvm_msr_entry
structs.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Instead of using 2400 bytes in the stack for 150 MSR entries in
kvm_get_msrs() and kvm_put_msrs(), allocate a buffer once for
each VCPU.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
QOM instance_init functions are not supposed to have any side-effects,
as new objects may be created at any moment for querying property
information (see qmp_device_list_properties()).
Calling cpu_exec_init() also affects QEMU's ability to handle errors
during CPU creation, as some actions done by cpu_exec_init() can't be
reverted.
Move cpu_exec_init() call to realize so a simple object_new() won't
trigger it, and so that it is called after some basic validation of CPU
parameters.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
QOM instance_init functions are not supposed to have any side-effects,
as new objects may be created at any moment for querying property
information (see qmp_device_list_properties()).
Move TCG initialization to realize time so it won't be called when just
doing object_new() on a X86CPU subclass.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Instead of requiring cpu.c to check if TCG was already initialized,
simply let the function be called multiple times.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
x86_cpudef_init() doesn't do anything anymore, cpudef_init(),
cpudef_setup(), and x86_cpudef_init() can be finally removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Newer PC machines don't set hw_version, and older machines set
model-id on compat_props explicitly, so we don't need the
x86_cpudef_setup() code that sets model_id using
qemu_hw_version() anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
open_eth_start_xmit has a huge stack usage of 65536 bytes approx.
Moving large arrays to heap to reduce stack usage.
Reduce size of a buffer allocated on stack to 0x600 bytes, which is the
maximal frame length when HUGEN bit is not set in MODER, only allocate
buffer on heap when that is too small. Thus heap is not used in typical
use case.
Signed-off-by: Zhou Jie <zhoujie2011@cn.fujitsu.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Drop local definitions of MII registers and use constants from mii.h for
registers and register bits. No functional changes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
We currently have an error path during migration that can cause
the source QEMU to abort:
migration_thread()
migration_completion()
runstate_is_running() ----------------> true if guest is running
bdrv_inactivate_all() ----------------> inactivate images
qemu_savevm_state_complete_precopy()
... qemu_fflush()
socket_writev_buffer() --------> error because destination fails
qemu_fflush() -------------------> set error on migration stream
migration_completion() -----------------> set migrate state to FAILED
migration_thread() -----------------------> break migration loop
vm_start() -----------------------------> restart guest with inactive
images
and you get:
qemu-system-ppc64: socket_writev_buffer: Got err=104 for (32768/18446744073709551615)
qemu-system-ppc64: /home/greg/Work/qemu/qemu-master/block/io.c:1342:bdrv_co_do_pwritev: Assertion `!(bs->open_flags & 0x0800)' failed.
Aborted (core dumped)
If we try postcopy with a similar scenario, we also get the writev error
message but QEMU leaves the guest paused because entered_postcopy is true.
We could possibly do the same with precopy and leave the guest paused.
But since the historical default for migration errors is to restart the
source, this patch adds a call to bdrv_invalidate_cache_all() instead.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Message-Id: <146357896785.6003.11983081732454362715.stgit@bahia.huguette.org>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
Instead of relying on x86_cpudef_setup() calling
qemu_hw_version(), just make old machines set model-id explicitly
on compat_props for qemu64, qemu32, and athlon. This will allow
us to eliminate x86_cpudef_setup() later.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
The macro will be used by code that will stop calling
qemu_hw_version() at runtime and just need a constant value.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Instead of using offset macros and bit operations in a uint32_t
array, use the X86XSaveArea struct to perform the loading/saving
operations in kvm_put_xsave() and kvm_get_xsave().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
This doesn't introduce any change in the code, as the offsets and
struct sizes match what was present in the table. This can be
validated by the QEMU_BUILD_BUG_ON lines on target-i386/cpu.h,
which ensures the struct sizes and offsets match the existing
values in ext_save_area.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Add structs that define the layout of the xsave areas used by
Intel processors. Add some QEMU_BUILD_BUG_ON lines to ensure the
structs match the XSAVE_* macros in target-i386/kvm.c and the
offsets and sizes at target-i386/cpu.c:ext_save_areas.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
QEMU has currently two ways to prevent migration to occur:
- migration blocker when it depends on runtime state
- VMStateDescription.unmigratable when migration is not supported at all
This patch gathers all the logic into a single function to be called from
both the savevm and the migrate paths.
This fixes a bug with 9p, at least, where savevm would succeed and the
following would happen in the guest after loadvm:
$ ls /host
ls: cannot access /host: Protocol error
With this patch:
(qemu) savevm foo
Migration is disabled when VirtFS export path '/' is mounted in the guest
using mount_tag 'host'
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <146239057139.11271.9011797645454781543.stgit@bahia.huguette.org>
[Update subject according to Paolo's suggestion - Amit]
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
* NMI cleanups (Bandan)
* RAMBlock/Memory cleanups and fixes (Dominik, Gonglei, Fam, me)
* first part of linuxboot support for fw_cfg DMA (Richard)
* IOAPIC fix (Peter Xu)
* iSCSI SG_IO fix (Vadim)
* Various infrastructure bug fixes (Zhijian, Peter M., Stefan)
* CVE fixes (Prasad)
# gpg: Signature made Mon 23 May 2016 16:06:18 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (24 commits)
cpus: call the core nmi injection function
nmi: remove x86 specific nmi handling
target-i386: add a generic x86 nmi handler
coccinelle: add g_assert_cmp* to macro file
iscsi: pass SCSI status back for SG_IO
esp: check dma length before reading scsi command(CVE-2016-4441)
esp: check command buffer length before write(CVE-2016-4439)
scripts/signrom.py: Check for magic in option ROMs.
scripts/signrom.py: Allow option ROM checksum script to write the size header.
Remove config-devices.mak on 'make clean'
cpus.c: Use pthread_sigmask() rather than sigprocmask()
memory: remove unnecessary masking of MemoryRegion ram_addr
memory: Drop FlatRange.romd_mode
memory: Remove code for mr->may_overlap
exec: adjust rcu_read_lock requirement
memory: drop find_ram_block()
vl: change runstate only if new state is different from current state
ioapic: clear remote irr bit for edge-triggered interrupts
ioapic: keep RO bits for IOAPIC entry
target-i386: key sfence availability on CPUID_SSE, not CPUID_SSE2
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
