| Age | Commit message (Collapse) | Author |
|---|
|
This makes use of qdev_prop_drive_iothread for scsi-disk so that the
disk can be attached to a node that is already in the target AioContext.
We need to check that the HBA actually supports iothreads, otherwise
scsi-disk must make sure that the node is already in the main
AioContext.
This changes the error message for conflicting iothread settings.
Previously, virtio-scsi produced the error message, now it comes from
blk_set_aio_context(). Update a test case accordingly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Some qdev block devices have support for iothreads and take care of the
AioContext they are running in, but most devices don't know about any of
this. For the latter category, the qdev drive property must make sure
that their BlockBackend is in the main AioContext.
Unfortunately, while the current code just does the same thing for
devices that do support iothreads, this is not correct and it would show
as soon as we actually try to keep a consistent AioContext assignment
across all nodes and users of a block graph subtree: If a node is
already in a non-default AioContext because of one of its users,
attaching a new device should still be possible if that device can work
in the same AioContext. Switching the node back to the main context
first and only then into the device AioContext causes failure (because
the existing user wouldn't allow the switch to the main context).
So devices that support iothreads need a different kind of drive
property that leaves the node in its current AioContext, but by using
this type, the device promises to check later that it can work with this
context.
This patch adds the qdev infrastructure that allows devices to signal
that they handle iothreads and qdev should leave the AioContext alone.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds a new parameter to blk_new() which requires its callers to
declare from which AioContext this BlockBackend is going to be used (or
the locks of which AioContext need to be taken anyway).
The given context is only stored and kept up to date when changing
AioContexts. Actually applying the stored AioContext to the root node
is saved for another commit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add an Error parameter to blk_set_aio_context() and use
bdrv_child_try_set_aio_context() internally to check whether all
involved nodes can actually support the AioContext switch.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The NBD server uses an AioContext notifier, so it can tolerate that its
BlockBackend is switched to a different AioContext. Before we start
actually calling bdrv_try_set_aio_context(), which checks for
consistency, outside of test cases, we need to make sure that the NBD
server actually allows this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Just make the test cover the AioContext of the filter node as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Signed-off-by: Kenneth Heitke <kenneth.heitke@intel.com>
Reviewed-by: Klaus Birkelund Jensen <klaus.jensen@cnexlabs.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Callback-based laio_submit() and laio_cancel() were left after
rewriting Linux AIO backend to coroutines in hope that they would be
used in other code that could bypass coroutines. They can be safely
removed because they have not been used since that time.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch adds a test where we cancel a throttled mirror job and
immediately close the VM before it can be cancelled. Doing so will
invoke bdrv_drain_all() while the mirror job tries to drain the
throttled node. When bdrv_drain_all_end() tries to lift its drain on
the throttle node, the job will exit and replace the current root node
of the BB drive0 (which is the job's filter node) by the throttle node.
Before the previous patch, this replacement did not increase drive0's
quiesce_counter by a sufficient amount, so when
bdrv_parent_drained_end() (invoked by bdrv_do_drained_end(), invoked by
bdrv_drain_all_end()) tried to end the drain on all of the throttle
node's parents, it decreased drive0's quiesce_counter below 0 -- which
fails an assertion.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
When ending a drained section, bdrv_do_drained_end() currently first
decrements the quiesce_counter, and only then actually ends the drain.
The bdrv_drain_invoke(bs, false) call may cause graph changes. Say the
graph change involves replacing an existing BB's ("blk") BDS
(blk_bs(blk)) by @bs. Let us introducing the following values:
- bs_oqc = old_quiesce_counter
(so bs->quiesce_counter == bs_oqc - 1)
- obs_qc = blk_bs(blk)->quiesce_counter (before bdrv_drain_invoke())
Let us assume there is no blk_pread_unthrottled() involved, so
blk->quiesce_counter == obs_qc (before bdrv_drain_invoke()).
Now replacing blk_bs(blk) by @bs will reduce blk->quiesce_counter by
obs_qc (making it 0) and increase it by bs_oqc-1 (making it bs_oqc-1).
bdrv_drain_invoke() returns and we invoke bdrv_parent_drained_end().
This will decrement blk->quiesce_counter by one, so it would be -1 --
were there not an assertion against that in blk_root_drained_end().
We therefore have to keep the quiesce_counter up at least until
bdrv_drain_invoke() returns, so that bdrv_parent_drained_end() does the
right thing for the parents @bs got during bdrv_drain_invoke().
But let us delay it even further, namely until bdrv_parent_drained_end()
returns, because then it mirrors bdrv_do_drained_begin(): There, we
first increment the quiesce_counter, then begin draining the parents,
and then call bdrv_drain_invoke(). It makes sense to let
bdrv_do_drained_end() unravel this exactly in reverse.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
drv_co_block_status digs bs->file for additional, more accurate search
for hole inside region, reported as DATA by bs since 5daa74a6ebc.
This accuracy is not free: assume we have qcow2 disk. Actually, qcow2
knows, where are holes and where is data. But every block_status
request calls lseek additionally. Assume a big disk, full of
data, in any iterative copying block job (or img convert) we'll call
lseek(HOLE) on every iteration, and each of these lseeks will have to
iterate through all metadata up to the end of file. It's obviously
ineffective behavior. And for many scenarios we don't need this lseek
at all.
However, lseek is needed when we have metadata-preallocated image.
So, let's detect metadata-preallocation case and don't dig qcow2's
protocol file in other cases.
The idea is to compare allocation size in POV of filesystem with
allocations size in POV of Qcow2 (by refcounts). If allocation in fs is
significantly lower, consider it as metadata-preallocation case.
102 iotest changed, as our detector can't detect shrinked file as
metadata-preallocation, which don't seem to be wrong, as with metadata
preallocation we always have valid file length.
Two other iotests have a slight change in their QMP output sequence:
Active 'block-commit' returns earlier because the job coroutine yields
earlier on a blocking operation. This operation is loading the refcount
blocks in qcow2_detect_metadata_preallocation().
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Block layer may recursively check block_status in file child of qcow2,
if qcow2 driver returned DATA. There are several test cases to check
influence of lseek on block_status performance. To see real difference
run on tmpfs.
Tests originally created by Kevin, I just refactored and put them
together into one executable file with simple output.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If the bitmap can't be used for whatever reason, we skip putting down
the reference. Fix that.
In practice, this means that if you attempt to gracefully exit QEMU
after a backup command being rejected, bdrv_close_all will fail and
tell you some unpleasant things via assert().
Reported-by: aihua liang <aliang@redhat.com>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1703916
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This tests that concurrent requests are correctly drained before making
graph modifications instead of running into assertions in
bdrv_replace_node().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
Instead of just asserting that no requests are in flight in
bdrv_replace_node(), which is a requirement that most callers ignore, we
can just drain the source node right there. This fixes at least starting
a commit job while I/O is active on the backing chain, but probably
other callers, too.
Having requests in flight on the target node isn't a problem because the
target just gets new parents, but the call path of running requests
isn't modified. So we can just drop this assertion without a replacement.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1711643
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
* Revert q35 to kernel irqchip (Alex)
* edu device fixes (Li Qiang)
* cleanups (Marc-André, Peter)
* Improvements to -accel help
* Better support for IA32_MISC_ENABLE MSR (Wanpeng)
* I2C test conversion to qgraph (Paolo)
# gpg: Signature made Mon 03 Jun 2019 14:20:12 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (24 commits)
q35: Revert to kernel irqchip
configure: remove tpm_passthrough & tpm_emulator
ci: store Patchew configuration in the tree
libqos: i2c: move address into QI2CDevice
tests: convert ds1338-test to qtest
tests: convert OMAP i2c tests to qgraph
libqos: add ARM imx25-pdk machine object
libqos: add ARM n800 machine object
libqos: convert I2C to qgraph
libqos: split I2CAdapter initialization and allocation
imx25-pdk: create ds1338 for qtest inside the test
pca9552-test: do not rely on state across tests
libqos: fix omap-i2c receiving more than 4 bytes
libqos: move common i2c code to libqos
qgraph: fix qos_node_contains with options
qgraph: allow extra_device_opts on contains nodes
edu: uses uint64_t in dma operation
edu: mmio: allow 64-bit access in read dispatch
edu: mmio: allow 64-bit access
i386: Enable IA32_MISC_ENABLE MWAIT bit when exposing mwait/monitor
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Commit b2fc91db8447 ("q35: set split kernel irqchip as default") changed
the default for the pc-q35-4.0 machine type to use split irqchip, which
turned out to have disasterous effects on vfio-pci INTx support. KVM
resampling irqfds are registered for handling these interrupts, but
these are non-functional in split irqchip mode. We can't simply test
for split irqchip in QEMU as userspace handling of this interrupt is a
significant performance regression versus KVM handling (GeForce GPUs
assigned to Windows VMs are non-functional without forcing MSI mode or
re-enabling kernel irqchip).
The resolution is to revert the change in default irqchip mode in the
pc-q35-4.1 machine and create a pc-q35-4.0.1 machine for the 4.0-stable
branch. The qemu-q35-4.0 machine type should not be used in vfio-pci
configurations for devices requiring legacy INTx support without
explicitly modifying the VM configuration to use kernel irqchip.
Link: https://bugs.launchpad.net/qemu/+bug/1826422
Fixes: b2fc91db8447 ("q35: set split kernel irqchip as default")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <155786484688.13873.6037015630912983760.stgit@gimli.home>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is a left-over from commit 7aaa6a16373 "tpm: express dependencies
with Kconfig".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190524181411.8599-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Patchew cannot yet retrieve the configuration from the QEMU Git tree, but
this is planned. In the meanwhile, let's start storing it as YAML
so that the Patchew configuration (currently accessible only to administrators)
is public and documented.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This removes the hardcoded I2C address from the tests. The address
is passed via QOSGraphEdgeOptions to i2c_device_create and stored
in the QI2CDevice.
The i2c_send and i2c_recv functions, along with their wrappers,
therefore, can be changed to take a QI2CDevice rather than an
adapter/address pair.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This way, ds1338-test will run for every machine that exposes
an i2c-bus.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This way, pca9952-test and tmp105-test will run for every machine
that exposes an i2c-bus.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is used to test imx_i2c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is used to test omap_i2c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Create an i2c-bus interface, corresponding to the I2CAdapter struct.
Wrap IMXI2C and OMAPI2C with a QOSGraphObject, and add the get_driver
function to retrieve the I2CAdapter.
The conversion is still not complete; for simplicity, i2c_recv and
i2c_send (along with their wrappers) still take an adapter/address
pair. Fixing that would be complicated until the tests are converted
to qgraph, so it is left for after the conversion.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Provide *_init functions that populate an I2CAdapter struct without
allocating one, and make the existing *_create functions wrap them.
Because in the new setup *_create might return a pointer inside the
IMXI2C or OMAPI2C struct, create companion *_free functions to go
back to the outer pointer.
All this is temporary until allocation will be handled entirely by
qgraph.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is no need to have a test device created by the board.
Instead, create it in the qtest so that we will be able to run
it on other boards too.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
receive_autoinc is relying on the LED state that is set by
send_and_receive. Stop doing that, because qgraph resets the
machine between tests.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If more than 4 bytes are received, the FIFO cannot host the entire
contents of the transfer and STP will be nonzero before entering
the transfer loop. Also, CNT will contain the number of bytes
left to be transferred instead of the total number of bytes in
the transfer.
(Reverse engineered from the omap_i2c.c source code; no available
datasheet).
This will fix ds1338-test for omap-i2c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The functions to read/write 8-bit or 16-bit registers are the same
in tmp105 and pca9552 tests, and in fact they are a special case of
"read block"/"write block" functionality; read block in turn is used
in ds1338-test.
Move everything inside libqos-test, removing the duplication. Account
for the small differences by adding to tmp105-test.c the "read register
after writing" behavior that is specific to it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently, if qos_node_contains was passed options, it would still
create an edge without any options. Instead, in that case
NULL acts as a terminator.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Allow choosing the bus that the device will be placed on, in case
the machine has more than one. Otherwise, the bus may not match
the base address of the controller we attach it to.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The dma related variable dma.dst/src/cnt is dma_addr_t, it is
uint64_t in x64 platform. Change these usage from uint32_to
uint64_t to avoid trancation in edu_dma_timer.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190510164349.81507-4-liq3ea@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The edu spec says when address >= 0x80, the MMIO area can
be accessed by 64-bit.
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20190510164349.81507-3-liq3ea@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The edu spec says the MMIO area can be accessed by 64-bit.
However currently the 'max_access_size' is not so the MMIO
access dispatch can only access 32-bit one time. This patch fixes
this to respect the spec.
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20190510164349.81507-2-liq3ea@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The CPUID.01H:ECX[bit 3] ought to mirror the value of the MSR
IA32_MISC_ENABLE MWAIT bit and as userspace has control of them
both, it is userspace's job to configure both bits to match on
the initial setup.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1557813999-9175-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It's never used anywhere.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190520030839.6795-5-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
According to: https://spdx.org/ids-how, let's still allow QEMU to use
the SPDX license identifier:
// SPDX-License-Identifier: ***
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190426062705.4651-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently, -accel help shows all possible accelerators regardless
if they are enabled in the binary or not. That is a different
semantic from -cpu and -machine helps, for example. So this change
makes it to list only the accelerators which support is compiled
in the binary target.
Note that it does not check if the accelerator is enabled in the
host, so the help message's header was rewritten to emphasize
that. Also qtest is not displayed given that it is used for
internal testing purpose only.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190530215755.328-2-wainersm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is a rare race between the atomic_cmpxchg and
bdrv_aio_cancel/bdrv_aio_cancel_async invocations. Detect it, the
only sensible we can do about it is to exit long_cb immediately.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
into staging
MIPS queue for June 1st, 2019
# gpg: Signature made Sat 01 Jun 2019 19:20:47 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-jun-1-2019:
target/mips: Improve performance of certain MSA instructions
target/mips: Clean up lmi_helper.c
target/mips: Clean up dsp_helper.c
tests/tcg: target/mips: Add tests for MSA bit set instructions
target/mips: Amend and cleanup MSA TCG tests
target/mips: Add emulation of MMI instruction PCPYUD
target/mips: Add emulation of MMI instruction PCPYLD
target/mips: Add emulation of MMI instruction PCPYH
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Eliminate loops for better performance.
Following MSA instructions from "UNOP" group are affected:
- NLZC.<B|H|W|D>
- NLOC.<B|H|W|D>
- PCNT.<B|H|W|D>
Following MSA instructions from "BINOP" group are affected:
- ADD_A.<B|H|W|D>
- ADDS_A.<B|H|W|D>
- ADDS_S.<B|H|W|D>
- ADDS_U.<B|H|W|D>
- ADDV.<B|H|W|D>
- ASUB_S.<B|H|W|D>
- ASUB_U.<B|H|W|D>
- AVE_S.<B|H|W|D>
- AVE_U.<B|H|W|D>
- AVER_S.<B|H|W|D>
- AVER_U.<B|H|W|D>
- BCLR.<B|H|W|D>
- BNEG.<B|H|W|D>
- BSET.<B|H|W|D>
- CEQ.<B|H|W|D>
- CLE_S.<B|H|W|D>
- CLE_U.<B|H|W|D>
- CLT_S.<B|H|W|D>
- CLT_U.<B|H|W|D>
- DIV_S.<B|H|W|D>
- DIV_U.<B|H|W|D>
- DOTP_S.<B|H|W|D>
- DOTP_U.<B|H|W|D>
- HADD_S.<B|H|W|D>
- HADD_U.<B|H|W|D>
- HSUB_S.<B|H|W|D>
- HSUB_U.<B|H|W|D>
- MAX_A.<B|H|W|D>
- MAX_S.<B|H|W|D>
- MAX_U.<B|H|W|D>
- MIN_A.<B|H|W|D>
- MIN_S.<B|H|W|D>
- MIN_U.<B|H|W|D>
- MOD_S.<B|H|W|D>
- MOD_U.<B|H|W|D>
- MUL_Q.<B|H|W|D>
- MULR_Q.<B|H|W|D>
- MULV.<B|H|W|D>
- SLL.<B|H|W|D>
- SRA.<B|H|W|D>
- SRAR.<B|H|W|D>
- SRL.<B|H|W|D>
- SRLR.<B|H|W|D>
- SUBS_S.<B|H|W|D>
- SUBS_U.<B|H|W|D>
- SUBSUS_U.<B|H|W|D>
- SUBSUU_S.<B|H|W|D>
- SUBV.<B|H|W|D>
Following MSA instructions from "TEROP" group are affected:
- BINSL.<B|H|W|D>
- BINSR.<B|H|W|D>
- DPADD_S.<B|H|W|D>
- DPADD_U.<B|H|W|D>
- DPSUB_S.<B|H|W|D>
- DPSUB_U.<B|H|W|D>
- MADD_Q.<B|H|W|D>
- MADDR_Q.<B|H|W|D>
- MADDV.<B|H|W|D>
- MSUB_Q.<B|H|W|D>
- MSUBR_Q.<B|H|W|D>
- MSUBV.<B|H|W|D>
Additionally, following MSA instructionas are also affected:
- ILVL.<B|H|W|D>
- ILVR.<B|H|W|D>
- ILVEV.<B|H|W|D>
- ILVOD.<B|H|W|D>
- PCKEV.<B|H|W|D>
- PCKOD.<B|H|W|D>
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1551718283-4487-2-git-send-email-mateja.marjanovic@rt-rk.com>
|
|
Remove several minor checkpatch warnings and errors.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1556018982-3715-7-git-send-email-aleksandar.markovic@rt-rk.com>
|
|
Remove several minor checkpatch warnings and errors.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1556018982-3715-6-git-send-email-aleksandar.markovic@rt-rk.com>
|
|
Add tests for MSA bit set instructions. This includes following
instructions:
* BCLR.B - clear bit (bytes)
* BCLR.H - clear bit (halfwords)
* BCLR.W - clear bit (words)
* BCLR.D - clear bit (doublewords)
* BNEG.B - negate bit (bytes)
* BNEG.H - negate bit (halfwords)
* BNEG.W - negate bit (words)
* BNEG.D - negate bit (doublewords)
* BSET.B - set bit (bytes)
* BSET.H - set bit (halfwords)
* BSET.W - set bit (words)
* BSET.D - set bit (doublewords)
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1555699081-24577-5-git-send-email-aleksandar.markovic@rt-rk.com>
|
|
Add missing bits and peaces of the tests of the emulation of certain
MSA (non-immediate variants): some tests were missing two last cases;
some instructions were missing wrappers; some test included wrong
headers; some tests were missing altogether; updated some copywright
preambles; do several other minor cleanups.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1555699081-24577-4-git-send-email-aleksandar.markovic@rt-rk.com>
|
|
Add emulation of MMI instruction PCPYUD. The emulation is implemented
using TCG front end operations directly to achieve better performance.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551712405-2530-4-git-send-email-mateja.marjanovic@rt-rk.com>
|
|
Add emulation of MMI instruction PCPYLD. The emulation is implemented
using TCG front end operations directly to achieve better performance.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551712405-2530-3-git-send-email-mateja.marjanovic@rt-rk.com>
|
|
Add emulation of MMI instruction PCPYH. The emulation is implemented
using TCG front end operations directly to achieve better performance.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551712405-2530-2-git-send-email-mateja.marjanovic@rt-rk.com>
|
|
into staging
ppc patch queue 2019-05-29
Next pull request against qemu-4.1. Highlights:
* KVM accelerated support for the XIVE interrupt controller in PAPR
guests
* A number of TCG vector fixes
* Fixes for the PReP / 40p machine
* Improvements to make check-tcg test coverage
Other than that it's just a bunch of assorted fixes, cleanups and
minor improvements.
This supersedes both the pull request dated 2019-05-21 and the one
dated 2019-05-22. I've dropped one hunk which I think may have caused
the check-tcg failure that Peter saw (by enabling the ppc64abi32
build, which I think has been broken for ages). I'm not entirely
certain, since I haven't reproduced exactly the same failure.
# gpg: Signature made Wed 29 May 2019 07:49:04 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.1-20190529: (44 commits)
ppc/pnv: add dummy XSCOM registers for PRD initialization
ppc/pnv: introduce new skiboot platform properties
spapr: Don't migrate the hpt_maxpagesize cap to older machine types
spapr: change default interrupt mode to 'dual'
spapr/xive: fix multiple resets when using the 'dual' interrupt mode
docs: provide documentation on the POWER9 XIVE interrupt controller
spapr/irq: add KVM support to the 'dual' machine
ppc/xics: fix irq priority in ics_set_irq_type()
spapr/irq: initialize the IRQ device only once
spapr/irq: introduce a spapr_irq_init_device() helper
spapr: check for the activation of the KVM IRQ device
spapr: introduce routines to delete the KVM IRQ device
sysbus: add a sysbus_mmio_unmap() helper
spapr/xive: activate KVM support
spapr/xive: add migration support for KVM
spapr/xive: introduce a VM state change handler
spapr/xive: add state synchronization with KVM
spapr/xive: add hcall support when under KVM
spapr/xive: add KVM support
spapr: Print out extra hints when CAS negotiation of interrupt mode fails
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
