aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-28hw/sdhci: introduce standard SD host controllerIgor Mitsyanko
Device model for standard SD Host Controller Interface (SDHCI) compliant with version 2.00 of SD association specification. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: a9mpcore: Coreify the SCUPeter Crosthwaite
Split the SCU in a9mpcore out into its own object definition. mpcore is now just a container for the mpcore components. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: a9mpcore: remove old_timer_status fieldPeter Crosthwaite
This field was write only and thus unused. Removed. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: mptimer: Remove WDT distinctionPeter Crosthwaite
In QEMU emulation, there is no functional difference between the ARM mpcore private timers and watchdogs. Removed all the distinction between the two from arm_mptimer.c and converted it to be just the mptimer. a9mpcore and arm11mpcore just instantiate the same mptimer object twice to get both timer and WDT. If in the future we want to make the WDT functionally different then we can use either QOM hierarchy to derive WDT from from mptimer, or we can add a property "is-wdt" or some such. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: arm11mpcore, a9mpcore: CamelCased type namesPeter Crosthwaite
To conform with QEMU coding style. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: mptimer: CamelCased type namesPeter Crosthwaite
Trivial find replace on type names "timerblock" and "arm_mptimer_state" to conform with QEMU coding style. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28hw/pflash_cfi01: Treat read in unknown command state as readPeter Maydell
The code for handling the default "unknown command state" case in pflash_read in pflash_cfi01.c comments "reset state & treat it as a read". However the code doesn't actually do this. Moving the default case to the top of the switch so it can fall through into the read case brings this file into line with pflash_cfi02 and makes the code behave as the comments suggest. The pflash_cfi01 code has always had this bug -- it was presumably introduced when the original author copied the cfi02 code and rearranged the order of the switch statement without noticing that the default case relied on the fall-through. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1358777318-7579-3-git-send-email-peter.maydell@linaro.org
2013-02-28hw/pflash_cfi01: Make read after byte-write or erase return statusPeter Maydell
The Intel flash command set requires that a read operation after doing a 'single byte write' command returns the status register; add this case to pflash_read() so we return the correct information. Similarly, the case for the 0x28 flavour of block erase was missing. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1358777318-7579-2-git-send-email-peter.maydell@linaro.org
2013-02-28hw/ds1338: Fix conversion between 12 hours and 24 hours modes.Antoine Mathys
The proper mapping between 24 hours and 12 hours modes is: 0 12 AM 1-11 1-11 AM 12 12 PM 13-23 1-11 PM Fix code accordingly. Signed-off-by: Antoine Mathys <barsamin@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-27target-i386: Use mulu2 and muls2Richard Henderson
These correspond very closely to the insns that we're emulating. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-26Merge remote-tracking branch 'kiszka/queues/slirp' into stagingAnthony Liguori
# By Jan Kiszka # Via Jan Kiszka * kiszka/queues/slirp: slirp: Properly initialize pollfds_idx of new sockets
2013-02-26glib: Add compat wrapper for g_poll on old glibAlexander Graf
Older glib doesn't implement g_poll(). Most notably the glib version in use on SLE11 is on 2.18 which is hit by this. We do want to use g_poll() in the source however. So on older systems, just wrap it with functions that do exist on older versions. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de> Message-id: 1361835970-2889-1-git-send-email-agraf@suse.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26qemu-log: default to stderr for logging outputPeter Maydell
Switch the default for qemu_log logging output from "/tmp/qemu.log" to stderr. This is an incompatible change in some sense, but logging is mostly used for debugging purposes so it shouldn't affect production use. The previous behaviour can be obtained by adding "-D /tmp/qemu.log" to the command line. This change requires us to: * update all the documentation/help text (we take the opportunity to smooth out minor inconsistencies between the phrasing in linux-user/bsd-user/system help messages) * make linux-user and bsd-user defer to qemu-log for the default logging destination rather than overriding it themselves * ensure that all logfile closing is done via qemu_log_close() and that that function doesn't close stderr as well as the obvious change to the behaviour of do_qemu_set_log() when no logfile name has been specified. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1361901160-28729-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26show --disable-gtk and --enable-gtk in the help messageHu Tao
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Message-id: 1361759268-16314-1-git-send-email-hutao@cn.fujitsu.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Add compat for GDK_KEY_XXX symbolsDaniel P. Berrange
The GDK_KEY_XXX symbols are new in GTK3 and only the most recent GTK2 releases. Most versions of GTK2 have simply used GDK_XXX Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-14-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Add compat macro for gtk_widget_get_realizedDaniel P. Berrange
The gtk_widget_get_realized method only arrived in GTK 2.20, so defined a compat macro for earlier GTK Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-13-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Add support for enabling build with GTK3Daniel P. Berrange
Add a arg to configure to switch from GTK2 (default) to GTK3 (optional) build for QEMU. ./configure --with-gtkabi=3.0 will choose GTK3, while ./configure --with-gtkabi=2.0 will choose GTK2 (and remains the current default) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-12-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Ensure x_keymap.o is built when GTK is enabledDaniel P. Berrange
The x_keymap.o file is required by both GTK and SDL builds, so it must be explicitly listed as a GTK dep to ensure the linker works when SDL is disabled Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-11-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Replace expose-event handler with draw handler in GTK3Daniel P. Berrange
In GTK3 the 'expose-event' signal has been replaced by a new 'draw' signal. The only difference is that the latter will pre-create the cairo drawing context & set the clip mask. Since the drawing code is already structured in a nice way, we can just wire up the 'gd_draw_event' method to the 'draw' signal in GTK3 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-10-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Conditionalize use of gtk_widget_size_requestDaniel P. Berrange
The gtk_widget_size_request method has been replaced by the gtk_widget_get_preferred_size method in GTK3. Conditionally call the new method in GTK3 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-9-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Conditionalize use of gdk_display_warp_pointerDaniel P. Berrange
In GTK3 the gdk_display_warp_pointer method is deprecated. Instead we should use gdk_device_warp on the GdkDevice instead associated with the event being processed. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-8-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Replace gtk_menu_append with gtk_menu_shell_appendDaniel P. Berrange
The gtk_menu_append method has long been deprecated in favour of the gtk_menu_shell_append method. The former is now entirely gone in GTK3, so switch all code to the latter which works on both GTK2 and GTK3 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-7-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Remove use of GtkVBox in GTK3Daniel P. Berrange
The GtkVBox class is deprecated, in favour of just using the GtkBox class directly. Eventually even GtkBox will be deprecated in favour of GtkGrid, but that is a bigger fix which can wait. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-6-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Conditionalize use of gdk_pointer_grab / gdk_pointer_ungrabDaniel P. Berrange
On GTK3 there is support for multiple pointer devices, so rather than using gdk_pointer_grab / gdk_pointer_ungrab we should iterate over all devices, grabbing each one in turn Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-5-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Conditionalize use of gdk_keyboard_grab / gdk_keyboard_ungrabDaniel P. Berrange
On GTK3 there is support for multiple keyboard devices, so rather than using gdk_keyboard_grab / gdk_keyboard_ungrab we should iterate over all devices, grabbing each one in turn Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-4-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Remove use of gdk_drawable_get_{screen, display}Daniel P. Berrange
The gdk_drawable_get_screen and gdk_drawable_get_display methods don't exist in GDK3. Fortunately, even on GTK2 they are not required - we can call the equivalent gtk_widget_get_screen/gtk_widget_get_display methods which have existed since GTK 2.2 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-3-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Add compat for gdk_drawable_get_size on GTK3Daniel P. Berrange
GTK3 lacks the gdk_drawable_get_size method, so we create a stub impl which gets the get_width/get_height mehtods instead Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1361805646-6425-2-git-send-email-berrange@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26gtk ui: unbreak spiceGerd Hoffmann
Merge of the gtk ui brought a initialitation order issue for spice: The using_spice variable isn't set yet when checked, leading to the default UI being activated (additionally to spice remote access). Let's set display_remote when we find a -spice switch on the command line, like we do for vnc. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1361804550-15858-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
# By Paolo Bonzini (7) and others # Via Kevin Wolf * kwolf/for-anthony: (22 commits) pc: add compatibility machine types for 1.4 blockdev: enable discard by default qemu-nbd: add --discard option blockdev: add discard suboption to -drive block: implement BDRV_O_UNMAP block: complete all IOs before .bdrv_truncate coroutine: trim down nesting level in perf_nesting test coroutine: move pooling to common code qemu-iotests: Test qcow2 image creation options qemu-iotests: Add qemu-img compare test qemu-img: Add compare subcommand qemu-img: Add "Quiet mode" option block: Add synchronous wrapper for bdrv_co_is_allocated_above block: refuse negative iops and bps values block: use Error in do_check_io_limits() qcow2: support compressed clusters in BlockFragInfo qemu-img: add compressed clusters to BlockFragInfo qemu-img: fix missing space in qemu-img check output qcow2: record fragmentation statistics during check qcow2: introduce check_refcounts_l1/l2() flags ...
2013-02-26Merge remote-tracking branch 'quintela/stats.next' into stagingAnthony Liguori
# By Juan Quintela # Via Juan Quintela * quintela/stats.next: migration: calculate expected_downtime migration: don't account sleep time for calculating bandwidth migration: calculate end time after we have sent the data migration: change initial value of expected_downtime
2013-02-26Merge remote-tracking branch 'luiz/queue/qmp' into stagingAnthony Liguori
# By Markus Armbruster # Via Luiz Capitulino * luiz/queue/qmp: check-qjson: More thorough testing of UTF-8 in strings
2013-02-26slirp: Properly initialize pollfds_idx of new socketsJan Kiszka
Otherwise we may start processing sockets in slirp_pollfds_poll that were created past slirp_pollfds_fill. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-25target-ppc: Fix SUBFE carryRichard Henderson
While ~T0+T1+CF = T1-T0+CF-1 is true for the low 32-bits, it does not produce the correct carry-out to bit 33. Do exactly what the manual says. Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-25target-arm: Fix sbc_CC carryRichard Henderson
While T0+~T1+CF = T0-T1+CF-1 is true for the low 32-bits, it does not produce the correct carry-out to bit 33. Do exactly what the manual says. Using the ~T1 makes the add and subtract code paths nearly identical, so have sbc_CC use adc_CC. Cc: Peter Maydell <peter.maydell@linaro.org> Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-25arm/translate.c: Fix adc_CC/sbc_CC implementationPeter Crosthwaite
commits 49b4c31efcce45ab714f286f14fa5d5173f9069d and 2de68a4900ef6eb67380b0c128abfe1976bc66e8 reworked the implementation of adc_CC and sub_CC. The new implementations (on the TCG_TARGET_HAS_add2_i32 code path) are incorrect. The new logic is: CF:NF = 0:A +/- 0:CF CF:NF = CF:A +/- 0:B The lower 32 bits of the intermediate result stored in NF needs to be passes into the second addition in place of A (s/CF:A/CF:NF): CF:NF = 0:A +/- 0:CF CF:NF = CF:NF +/- 0:B This patch fixes the issue. Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-23target-mips: fix for sign-issue in MULQ_W helperPetar Jovanovic
Correct sign-propagation before multiplication in MULQ_W helper. The change also fixes previously incorrect expected values in the tests for MULQ_RS.W and MULQ_S.W. Signed-off-by: Petar Jovanovic <petarj@mips.com> Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-02-23target-mips: fix for incorrect multiplication with MULQ_S.PHPetar Jovanovic
The change corrects sign-related issue with MULQ_S.PH. It also includes extension to the already existing test which will trigger the issue. Signed-off-by: Petar Jovanovic <petarj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-02-23target-xtensa: Use add2/sub2 for macRichard Henderson
Cc: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-xtensa: Use mul*2 for mul*hiRichard Henderson
Cc: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-unicore32: Use mul*2 for do_multRichard Henderson
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-sh4: Use mul*2 for dmul*Richard Henderson
Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-sparc: Use mul*2 for multiplyRichard Henderson
Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-sparc: Use official add2/sub2 interfaces for addx/subxRichard Henderson
Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-ppc: Compute mullwo without branchesRichard Henderson
Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-ppc: Compute arithmetic shift carry without branchesRichard Henderson
Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-ppc: Implement neg in terms of subfRichard Henderson
Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-ppc: Use add2 for carry generationRichard Henderson
Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-ppc: Compute addition carry with setcondRichard Henderson
Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-ppc: Compute addition overflow without branchesRichard Henderson
Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-ppc: Use setcond in gen_op_cmpRichard Henderson
Which means that callers need not copy data into local tmps. Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-13 13:44:57 +0000