aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-10-08Add new config-devices.mak for each targetJuan Quintela
We generate config-devices.h from there automatically. We need to do it in main Makefile, because we are going to need a main Makefile for them. Patchworks-ID: 35196 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Move generation of config-target.h to Makefile from configureJuan Quintela
Patchworks-ID: 35194 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Rename config.{h, mak} config-target.{h, mak}Juan Quintela
Add config.h file that includes config-target.h and config-host.h Patchworks-ID: 35193 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Remove useless check for config-host.makJuan Quintela
If config-host.mak dont' exist, we have exited in the check at the beginning of the file. Once here, move the bits to the else part of the test at the beginning of the file. Patchworks-ID: 35191 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Move generation of config-host.h to Makefile from configureJuan Quintela
Use timestamp based appreach to avoid not needed recompilation. Add it to rules.mak Many thanks to Paolo Bonzini for helpding the design, and the debug. Patchworks-ID: 35190 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08Don't include config-host.mak from inside config.makJuan Quintela
Include it directly in Makefile.target Patchworks-ID: 35189 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08CRIS: Update PR_EDA on TLB faults.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-10-07Clean up test for qdev_init() failureMarkus Armbruster
Some callers test for != 0, some for < 0. Normalize to < 0. Patchworks-ID: 35171 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07Warn if value of qdev_init() isn't checkedMarkus Armbruster
After qdev_init() fails, the device is gone. Failure to check runs a high risk of use-after-free. Patchworks-ID: 35166 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07Make isa_create() terminate program on failureMarkus Armbruster
Callers don't check the return value anyway. Patchworks-ID: 35172 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07New qdev_init_nofail()Markus Armbruster
Like qdev_init(), but terminate program via hw_error() instead of returning an error value. Use it instead of qdev_init() where terminating the program on failure is okay, either because it's during machine construction, or because we know that failure can't happen. Because relying in the latter is somewhat unclean, and the former is not always obvious, it would be nice to go back to qdev_init() in the not-so-obvious cases, only with proper error handling. I'm leaving that for another day, because it involves making sure that error values are properly checked by all callers. Patchworks-ID: 35168 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07Check return value of qdev_init()Markus Armbruster
But do so only where it may actually fail. Leave the rest for the next commit. Patchworks-ID: 35167 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07Make qdev_init() destroy the device on failureMarkus Armbruster
Before, every caller had to do this. Only two actually did. Patchworks-ID: 35170 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07Unbreak USB autoconnect filtersMarkus Armbruster
Commit 22f84e73 added a qdev_init() missing on the path through usb_host_device_open(), but that broke the path through usb_host_auto_scan(), which already had one. Remove that one. Patchworks-ID: 35169 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07tcg: improve output logAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-06target-i386: fix ARPLLaurent Desnogues
The arpl implementation in target-i386/translate.c uses cpu_A0 temporary across a brcond op. This patch fixes that issue. Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-06configure and Makefile are not generated in qemuJuan Quintela
Just say it to make Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Don't use implicit rules for MakefileJuan Quintela
This remove implicit rules + implicit variables. Explicit rules like the generation of %.h and %.c from %.hx still works as expected. As an added bonus, now the output of make -d is readable. As another added bonus, time spend on Makefiles is way smaller. We run make -j3 in a fully compiled tree, and results are: Before: $ time make -j3 real 0m1.225s user 0m1.660s sys 0m0.253s After: $ time make -j3 real 0m0.422s user 0m0.393s sys 0m0.248s Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06optionrom: create .PHONY variableJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06add build-all to .PHONY rulesJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06optionrom: remove use of implicit RM variableJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06AIOLIBS is not used anywhereJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06qdev: move commentGerd Hoffmann
Move comment back next to main_system_bus to avoid confusion. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06qemu/pci: make pci not depend on msixMichael S. Tsirkin
Making pci device cleanup msix automatically makes pci.c depend on msix.c, which is IMO messy. Since devices do msix_init it's easy and natural for them to also do msix_uninit. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06qemu/pci: clarify pci config load routineMichael S. Tsirkin
PCI load routine has to be called with size equal to 256 (otherwise it will crash in weird ways). So assert this, making code clearer. Also avoid dynamically sized array on stack - good for portability. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Final net cleanup after conversion to QemuOptsMark McLoughlin
Now that net_client_init() has no users, kill it off and rename net_client_init_from_opts(). There is no further need for the old code in net_client_parse() either. We use qemu_opts_parse() 'firstname' facitity for that. Instead, move the special handling of the 'vmchannel' type there. Simplify the vl.c code into merely call net_client_parse() for each -net command line option and then calling net_init_clients() later to iterate over the options and create the clients. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Port PCI NIC hotplug to QemuOptsMark McLoughlin
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Port usb net to QemuOptsMark McLoughlin
We need net_client_init_from_opts() exported for this Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Port host_net_add monitor command to QemuOptsMark McLoughlin
Here is where we rely on qemu_opts_parse() to handle an empty string. We could alternatively explicitly handle this here by using qemu_opts_create() when we're not supplied any parameters, but its cleaner this way. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Clean up legacy code in net_client_init()Mark McLoughlin
Now that we've ported everything over to QemuOpts, we can kill off all the cruft in net_client_init(). Note, the 'channel' type requires special handling as it uses a format that QemuOpts can't parse Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Port -net dump to QemuOptsMark McLoughlin
Note, not incrementing nb_host_devs in net_init_dump() is intentional. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Port -net vde to QemuOptsMark McLoughlin
The net_vde_init() change is needed because we now pass NULL pointers instead of empty strings for group/sock if they're not set. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Port -net socket to QemuOptsMark McLoughlin
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Port -net tap to QemuOptsMark McLoughlin
Some parameters are not valid with fd=. Rather than having a separate parameter description table for validating fd=, it's easir to just check for those invalid parameters later. Note, the need to possible lookup a file descriptor name from the monitor is the reason why all these init functions are passed a Monitor pointer. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Port -net user to QemuOptsMark McLoughlin
The handling of guestfwd and hostfwd requires the previous changes to allow multiple values for each parameter. The only way to access those multiple values is to use qemu_opt_foreach(). Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Port -net none and -net nic to QemuOptsMark McLoughlin
We use a table of network types to look up the initialization function and parameter descriptions in net_client_init(). For now, we use QemuOpts for the 'none' and 'nic' types. Subsequent patches port the other types too and the special casing is removed. We're not parsing the full -net option string here as the type has been stripped from the string, so we do not use qemu_opts_parse() 'firstname' facility. This will also be rectified in subsequent patches. No functional changes are introduced by this patch. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Add qemu_net_optsMark McLoughlin
The first step in porting -net to QemuOpts. We do not include parameter descriptions in the QemuOptsList because we use the first parameter to choose which descriptions validate against. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Never overwrite a QemuOptMark McLoughlin
Rather than overwriting a QemuOpt, just add a new one to the tail and always do a reverse search for parameters to preserve the same behaviour. We use this order so that foreach() iterates over the opts in their original order. This will allow us handle options where multiple values for the same parameter is allowed - e.g. -net user,hostfwd= Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Add qemu_opts_validate() for post parsing validationMark McLoughlin
Several qemu command line options have a parameter whose value affects what other parameters are accepted for the option. In these cases, we can have an empty description table in the QemuOptsList and once the option has been parsed we can use a suitable description table to validate the other parameters based on the value of that parameter. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Make qemu_opts_parse() handle empty stringsMark McLoughlin
Rather than making callers explicitly handle empty strings by using qemu_opts_create(), we can easily have qemu_opts_parse() handle empty parameter strings. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Remove double error message for -device option parsingMark McLoughlin
qemu_opts_parse() gives a suitable error message in all failure cases so we can remove the error message from the caller. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Remove double error message in qemu_option_set()Mark McLoughlin
qemu_opt_set() prints an error message in all failure cases, so qemu_set_option() doesn't need to print another error. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Remove bogus error message from qemu_opts_set()Mark McLoughlin
The only way qemu_opts_create() can fail is if a QemuOpts with that id already exists and fail_if_exists=1. In that case, we already print an error which makes more sense than the one in qemu_opts_set(). Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Drop config_error(), use qemu_error() insteadMarkus Armbruster
Diagnostic output goes to stderr, except when we're in a monitor command, when it goes to the monitor instead. config_error() implements this with a monitor argument: if it's non-null, report there, else to stderr. This obliges us to pass the monitor down various call chains, to make it available to config_error(). The recently created qemu_error() doesn't need a monitor argument to route output. Use it. There's one user-visible difference: config_error() prepended "qemu: " to a message bound for stderr. qemu_error() doesn't, which means the prefix goes away with this commit. If such a prefix is desired for stderr, then I figure it should be slapped on all error messages, not just the ones that used to go through config_error(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Don't exit() in config_error()Markus Armbruster
Propagating errors up the call chain is tedious. In startup code, we can take a shortcut: terminate the program. This is wrong elsewhere, the monitor in particular. config_error() tries to cater for both customers: it terminates the program unless its mon parameter tells it it's working for the monitor. Its users need to return status anyway (unless passing a null mon argument, which none do), which their users need to check. So this automatic exit buys us exactly nothing useful. Only the dangerous delusion that we can get away without returning status. Some of its users fell for that. Their callers continue executing after failure when working for the monitor. This bites monitor command host_net_add in two places: * net_slirp_init() continues after slirp_hostfwd(), slirp_guestfwd(), or slirp_smb() failed, and may end up reporting success. This happens for "host_net_add user guestfwd=foo": it complains about the invalid guest forwarding rule, then happily creates the user network without guest forwarding. * net_client_init() can't detect slirp_guestfwd() failure, and gets fooled by net_slirp_init() lying about success. Suppresses its "Could not initialize device" message. Add the missing error reporting, make sure errors are checked, and drop the exit() from config_error(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Make net_client_init() consume slirp_configs even on errorMarkus Armbruster
net_slirp_init() walks slirp_configs, and stops when it encounters one that doesn't work. Instead of consuming slirp_configs members there, consume them in the sole caller. This makes sure all are consumed. Before, the tail starting with the non-working one was left in place, where it made the next net_slirp_init() fail again. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Use qemu_strdup() for VLANClientState string fieldsMark McLoughlin
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Move memset() from net_client_uninit() to net_client_init()Mark McLoughlin
zeroing a structure before using it is more common than zeroing after using it. Also makes the setting of nd->used more obvious. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Make NICInfo string fields non-constMark McLoughlin
We now only assign strdup()ed strings to these fields, never static strings. aliguori: fix build for ppc_prep and mips_jazz Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-06Don't assign a static string to NICInfo::modelMark McLoughlin
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-13 12:39:00 +0000