aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-09-03cpu: Use QTAILQ for CPU listAndreas Färber
Introduce CPU_FOREACH(), CPU_FOREACH_SAFE() and CPU_NEXT() shorthand macros. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-09-03a15mpcore: Use qemu_get_cpu() for generic timersAndreas Färber
This simplifies the loop and aids with refactoring of CPU list. Requested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-09-03Merge branch 'tcg-next' of git://github.com/rth7680/qemuAurelien Jarno
* 'tcg-next' of git://github.com/rth7680/qemu: (29 commits) tcg-i386: Make use of zero-extended memory helper routines tcg: Introduce zero and sign-extended versions of load helpers exec: Split softmmu_defs.h target: Include softmmu_exec.h where forgotten exec: Rename USUFFIX to LSUFFIX tcg-i386: Don't perform GETPC adjustment in TCG code exec: Reorganize the GETRA/GETPC macros configure: Allow x32 as a host tcg-i386: Adjust tcg_out_tlb_load for x32 tcg-i386: Use intptr_t appropriately tcg: Fix jit debug for x32 tcg: Use appropriate types in tcg_reg_alloc_call tcg: Change tcg_out_ld/st offset to intptr_t tcg: Change tcg_gen_exit_tb argument to uintptr_t tcg: Use uintptr_t in TCGHelperInfo tcg: Change relocation offsets to intptr_t tcg: Change memory offsets to intptr_t tcg: Change frame pointer offsets to intptr_t tcg: Define TCG_ptr properly tcg: Define TCG_TYPE_PTR properly ...
2013-09-03Merge branch 'ppc-for-upstream' of git://github.com/agraf/qemuAurelien Jarno
* 'ppc-for-upstream' of git://github.com/agraf/qemu: PPC: spapr: iommu: rework traces spapr: add "stop-self" RTAS call required to support hot CPU unplug PPC: KVM: Compile fix for qemu_notify_event pseries: Add H_SET_MODE hcall to change guest exception endianness xics: move registration of global state to realize() spapr-pci: rework MSI/MSIX target-ppc: Use #define instead of opencoding SLB valid bit spapr-pci: fix config space access to support bridges target-ppc: fix bit extraction for FPBF and FPL ppc405_boards: Don't enforce presence of firmware for qtest ppc405_uc: Disable debug output ppc405_boards: Disable debug output ppc: virtex_ml507: QEMU_OPTION_dtb support for this machine. disas/ppc.c: Fix little endian disassembly target-ppc: POWER7 supports the MSR_LE bit target-ppc: USE LPCR_ILE to control exception endian on POWER7 pseries: Fix stalls on hypervisor virtual console PPC: E500: Generate device tree on reset
2013-09-03tcg/mips: only enable ext8s/ext16s ops on MIPS32R2Aurelien Jarno
On MIPS ext8s and ext16s ops are implemented with a dedicated instruction only on MIPS32R2, otherwise the same kind of implementation than at TCG level (shift left followed by shift right) is used. Change that by only implementing the ext8s and ext16s ops on MIPS32R2 so that optimizations can be done by the optimizer. Use an inline version to avoid having to test again for MIPS32R2 instructions. Keep the shift implementation for the ld/st routines. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-09-03tcg/mips: inline bswap16/bswap32 opsAurelien Jarno
Use an inline version for the bswap16 and bswap32 ops to avoid testing for MIPS32R2 instructions availability, as these ops are only available in that case. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-09-03tcg/mips: detect available host instructions at runtimeAurelien Jarno
Now that TCG supports enabling and disabling ops at runtime, it's possible to detect the available host instructions at runtime, and enable the corresponding ops accordingly. Unfortunately it's not easy to probe for available instructions on MIPS, the information is partially available in /proc/cpuinfo, and not available in AUXV. This patch therefore probes for the instructions by trying to execute them and by catching a possible SIGILL signal. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-09-02tcg-i386: Make use of zero-extended memory helper routinesRichard Henderson
For 8 and 16-bit unsigned loads, rely on the zero-extension from the helper and use a smaller 32-bit move insn. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Introduce zero and sign-extended versions of load helpersRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02exec: Split softmmu_defs.hRichard Henderson
The _cmmu helpers can be moved to exec-all.h. The helpers that are used from TCG will shortly need access to tcg_target_long so move their declarations into tcg.h. This requires minor include adjustments to all TCG backends. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02target: Include softmmu_exec.h where forgottenRichard Henderson
Several targets forgot to include softmmu_exec.h, which would break them with a header cleanup to follow. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02exec: Rename USUFFIX to LSUFFIXRichard Henderson
In a following patch, there will be confusion between multiple "unsigned" suffixes; rename this one so as to imply "load". Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg-i386: Don't perform GETPC adjustment in TCG codeRichard Henderson
Since we now perform it inside the helper, no need to do it here. This also lets us perform a tail-call from the store slow path to the helper. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02exec: Reorganize the GETRA/GETPC macrosRichard Henderson
Always define GETRA; use __builtin_extract_return_addr, rather than having a special case for s390. Split GETPC_ADJ out of GETPC; use 2 universally, rather than having a special case for arm. Rename GETPC_LDST to GETRA_LDST to indicate that it does not contain the GETPC_ADJ value. Likewise with GETPC_EXT to GETRA_EXT. Perform the GETPC_ADJ adjustment inside helper_ret_ld/st. This will allow backends to pass along the "true" return address rather than the massaged GETPC value. In the meantime, double application of GETPC_ADJ does not hurt, since the call insn in all ISAs is at least 4 bytes long. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02configure: Allow x32 as a hostRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg-i386: Adjust tcg_out_tlb_load for x32Richard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg-i386: Use intptr_t appropriatelyRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Fix jit debug for x32Richard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Use appropriate types in tcg_reg_alloc_callRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change tcg_out_ld/st offset to intptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change tcg_gen_exit_tb argument to uintptr_tRichard Henderson
And update all users. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Use uintptr_t in TCGHelperInfoRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change relocation offsets to intptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change memory offsets to intptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change frame pointer offsets to intptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Define TCG_ptr properlyRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Define TCG_TYPE_PTR properlyRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Allow TCG_TARGET_REG_BITS to be specified independantlyRichard Henderson
There are several hosts for which it would be useful to use the available 64-bit registers in a 32-bit pointer environment. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Fix next_tb type in cpu_execRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change tcg_qemu_tb_exec return to uintptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change flush_icache_range arguments to uintptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02qtest: Fix FMT_timeval vs time_tRichard Henderson
Since FMT_timeval unconditionally uses %ld for both tv_sec and tv_usec, and already casts tv_usec to long, also cast tv_sec to long. Cc: Andreas Färber <afaerber@suse.de> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Constant fold div, remRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg-ppc64: Implement muluh, mulshRichard Henderson
Using these instead of mulu2 and muls2 lets us avoid having to argument overlap analysis in the backend. Normal register allocation will DTRT. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg-mips: Implement mulsh, muluhRichard Henderson
With the optimization in tcg_liveness_analysis, we can avoid the MFLO when it is unused. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Add muluh and mulsh opcodesRichard Henderson
Use them in places where mulu2 and muls2 are used. Optimize mulx2 with dead low part to mulxh. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02PPC: spapr: iommu: rework tracesAlexey Kardashevskiy
This converts old style fprintf to traces. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [agraf: change patch subject] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-02spapr: add "stop-self" RTAS call required to support hot CPU unplugAlexey Kardashevskiy
PAPR+ requires two RTAS calls to be supported by the hypervisor in order to allow hotplugging VCPUs from the guest. The "start-cpu" RTAS call was already there but "stop-self" was not. This adds the "stop-self" RTAS call. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-02PPC: KVM: Compile fix for qemu_notify_eventAlexander Graf
The function qemu_notify_event is defined by a header that we don't include in the PPC KVM code. Include it to get the code building again. target-ppc/kvm_ppc.c: In function 'kvmppc_timer_hack': target-ppc/kvm_ppc.c:26:5: error: implicit declaration of function 'qemu_notify_event' [-Werror=implicit-function-declaration] target-ppc/kvm_ppc.c:26:5: error: nested extern declaration of 'qemu_notify_event' [-Werror=nested-externs] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-02pseries: Add H_SET_MODE hcall to change guest exception endiannessAnton Blanchard
H_SET_MODE is used for controlling various partition settings. One of these settings is the endianness a guest takes its exceptions in. Signed-off-by: Anton Blanchard <anton@samba.org> [agraf: fix whitespace] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-02xics: move registration of global state to realize()Alexey Kardashevskiy
Registration of global state belongs into realize so move it there. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-02spapr-pci: rework MSI/MSIXAlexey Kardashevskiy
On the sPAPR platform a guest allocates MSI/MSIX vectors via RTAS hypercalls which return global IRQ numbers to a guest so it only operates with those and never touches MSIMessage. Therefore MSIMessage handling is completely hidden in QEMU. Previously every sPAPR PCI host bridge implemented its own MSI window to catch msi_notify()/msix_notify() calls from QEMU devices (virtio-pci or vfio) and route them to the guest via qemu_pulse_irq(). MSIMessage used to be encoded as: .addr - address within the PHB MSI window; .data - the device index on PHB plus vector number. The MSI MR write function translated this MSIMessage to a global IRQ number and called qemu_pulse_irq(). However the total number of IRQs is not really big (at the moment it is 1024 IRQs starting from 4096) and even 16bit data field of MSIMessage seems to be enough to store an IRQ number there. This simplifies MSI handling in sPAPR PHB. Specifically, this does: 1. remove a MSI window from a PHB; 2. add a single memory region for all MSIs to sPAPREnvironment and spapr_pci_msi_init() to initialize it; 3. encode MSIMessage as: * .addr - a fixed address of SPAPR_PCI_MSI_WINDOW==0x40000000000ULL; * .data as an IRQ number. 4. change IRQ allocator to align first IRQ number in a block for MSI. MSI uses lower bits to specify the vector number so the first IRQ has to be aligned. MSIX does not need any special allocator though. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-02target-ppc: Use #define instead of opencoding SLB valid bitAneesh Kumar K.V
Use SLB_ESID_V instead of (1 << 27) in the code Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-02spapr-pci: fix config space access to support bridgesAlexey Kardashevskiy
spapr-pci config space accessors use find_dev() to find a PCI device. However find_dev() only searched on a primary bus and did not do recursive search through secondary buses so config space access was not possible for devices other that on a primary bus. This fixed find_dev() by using the PCI API pci_find_device() function. This effectively enabled pci bridges on spapr. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-02target-ppc: fix bit extraction for FPBF and FPLAurelien Jarno
Bit extraction for the FP BF and L field of the MTFSFI and MTFSF instructions is wrong and doesn't match the reference manual (which explain the bit number in big endian format). It has been broken in commit 7d08d85645def18eac2a9d672c1868a35e0bcf79. This patch fixes this, which in turn fixes the problem reported by Khem Raj about the floor() function of libm. Reported-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> CC: qemu-stable@nongnu.org (1.6) Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-02ppc405_boards: Don't enforce presence of firmware for qtestAndreas Färber
Adopt error_report() while at it. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-02ppc405_uc: Disable debug outputAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-02ppc405_boards: Disable debug outputAndreas Färber
Also move one stray debug output into an #ifdef. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-02ppc: virtex_ml507: QEMU_OPTION_dtb support for this machine.Efimov Vasily
QEMU has 'dtb' option for specifing the device tree file for the kernel. The patch adds support for this option to the 'virtex_ml507' machine implementation. Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-02disas/ppc.c: Fix little endian disassemblyAnton Blanchard
Use info->endian to select the endian of the instruction to be disassembled. Signed-off-by: Anton Blanchard <anton@samba.org> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-23 19:23:02 +0000