aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-11-05cpu: replay instructions sequencePavel Dovgalyuk
This patch adds calls to replay functions into the icount setup block. In record mode number of executed instructions is written to the log. In replay mode number of istructions to execute is taken from the replay log. When replayed instructions counter is expired qemu_notify_event() function is called to wake up the iothread. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162405.8676.31890.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-05cpu-exec: allow temporary disabling icountPavel Dovgalyuk
This patch is required for deterministic replay to generate an exception by trying executing an instruction without changing icount. It adds new flag to TB for disabling icount while translating it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162359.8676.77011.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-05replay: introduce icount eventPavel Dovgalyuk
This patch adds icount event to the replay subsystem. This event corresponds to execution of several instructions and used to synchronize input events in the replay phase. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162354.8676.31351.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-05replay: introduce mutex to protect the replay logPavel Dovgalyuk
This mutex will protect read/write operations for replay log. Using mutex is necessary because most of the events consist of several fields stored in the log. The mutex will help to avoid races. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162348.8676.8628.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-05replay: internal functions for replay logPavel Dovgalyuk
This patch adds functions to perform read and write operations with replay log. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162342.8676.29445.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-05replay: global variables and function stubsPavel Dovgalyuk
This patch adds global variables, defines, function declarations, and function stubs for deterministic VM replay used by external modules. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162337.8676.41538.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-05Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20151104' ↵Peter Maydell
into staging migration/next for 20151104 # gpg: Signature made Wed 04 Nov 2015 12:45:19 GMT using RSA key ID 5872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" * remotes/juanquintela/tags/migration/20151104: migration: fix analyze-migration.py script migration: code clean up migration: rename cancel to cleanup in SaveVMHandles migration: rename qemu_savevm_state_cancel migration: defer migration_end & blk_mig_cleanup Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-04Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-11-03' ↵Peter Maydell
into staging vl.c: Error message rework # gpg: Signature made Tue 03 Nov 2015 08:40:50 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-error-2015-11-03: vl.c: Use "%s support is disabled" error messages consistently vl.c: Improve warnings on use of deprecated options vl.c: Touch up error messages vl.c: Remove unnecessary uppercase in error messages vl.c: Use "warning:" prefix consistently on warnings vl.c: Remove periods and exclamation points from error messages vl.c: Replace fprintf(stderr) with error_report() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-04migration: fix analyze-migration.py scriptMark Cave-Ayland
Commit 61964 "Add configuration section" broke the analyze-migration.py script which terminates due to the unrecognised section. Fix the script by parsing the contents of the configuration section directly into a new ConfigurationSection object (although nothing is done with it yet). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Juan Quintela <quintela@redhat.com>al3 Signed-off-by: Juan Quintela <quintela@redhat.com>al3
2015-11-04migration: code clean upLiang Li
Just clean up code, no behavior change. Signed-off-by: Liang Li <liang.z.li@intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com>al3 Reviewed-by: Amit Shah <amit.shah@redhat.com>al3 Signed-off-by: Juan Quintela <quintela@redhat.com>al3
2015-11-04migration: rename cancel to cleanup in SaveVMHandlesLiang Li
'cleanup' seems more appropriate than 'cancel'. Signed-off-by: Liang Li <liang.z.li@intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com>al3 Reviewed-by: Amit Shah <amit.shah@redhat.com>al3 Signed-off-by: Juan Quintela <quintela@redhat.com>al3
2015-11-04migration: rename qemu_savevm_state_cancelLiang Li
The function qemu_savevm_state_cancel is called after the migration in migration_thread, it seems strange to 'cancel' it after completion, rename it to qemu_savevm_state_cleanup looks better. Signed-off-by: Liang Li <liang.z.li@intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com>al3 Reviewed-by: Amit Shah <amit.shah@redhat.com>al3 Signed-off-by: Juan Quintela <quintela@redhat.com>al3
2015-11-04migration: defer migration_end & blk_mig_cleanupLiang Li
Because of the patch 3ea3b7fa9af067982f34b of kvm, which introduces a lazy collapsing of small sptes into large sptes mechanism, now migration_end() is a time consuming operation because it calls memroy_global_dirty_log_stop(), which will trigger the dropping of small sptes operation and takes about dozens of milliseconds, so call migration_end() before all the vmsate data has already been transferred to the destination will prolong VM downtime. This operation should be deferred after all the data has been transferred to the destination. blk_mig_cleanup() can be deferred too. For a VM with 8G RAM, this patch can reduce the VM downtime about 30 ms. Signed-off-by: Liang Li <liang.z.li@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com>al3 Reviewed-by: Amit Shah <amit.shah@redhat.com>al3 Signed-off-by: Juan Quintela <quintela@redhat.com>al3
2015-11-03Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20151103' into staging target-arm queue: * code cleanup to use symbolic constants for register bank numbers * fix direct booting of modern Linux kernels on xilinx_zynq by setting SCLR values to what the kernel expects firmware to have done * implement SYSRESETREQ for ARMv7M CPU (stellaris boards) * update MAINTAINERS to mention new qemu-arm mailing list * clean up display of PSTATE in AArch64 debug logs * report Secure/Nonsecure status in CPU debug logs * fix a missing _CCA attribute in ACPI tables * add support for GICv3 to ACPI tables # gpg: Signature made Tue 03 Nov 2015 13:58:46 GMT using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" * remotes/pmaydell/tags/pull-target-arm-20151103: ARM: ACPI: Fix MPIDR value in ACPI table hw/arm/virt-acpi-build: Add GICC ACPI subtable for GICv3 hw/arm/virt-acpi-build: _CCA attribute is compulsory target-arm: Report S/NS status in the CPU debug logs target-arm: Bring AArch64 debug CPU display of PSTATE into line with AArch32 MAINTAINERS: Add new qemu-arm mailing list to ARM related entries arm: stellaris: exit on external reset request armv7-m: Implement SYSRESETREQ armv7-m: Return DeviceState* from armv7m_init() arm: xilinx_zynq: Add linux pre-boot arm: boot: Add board specific setup code API arm: boot: Adjust indentation of FIXUP comments target-arm: Add and use symbolic names for register banks Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20151103-1' into ↵Peter Maydell
staging usb: two bugfixes for ehci & usb-host. # gpg: Signature made Tue 03 Nov 2015 10:57:28 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-usb-20151103-1: usb-host: fix usb3ep0quirk test ehci: clear suspend bit on detach Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03ARM: ACPI: Fix MPIDR value in ACPI tableShannon Zhao
Use mp_affinity of ARMCPU as the CPU MPIDR instead of the CPU index. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 1446285001-7316-1-git-send-email-zhaoshenglong@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03hw/arm/virt-acpi-build: Add GICC ACPI subtable for GICv3Shannon Zhao
When booting VM with GICv3, the kernel needs GICC ACPI subtable to initialize the CPUs, e.g. MPIDR information. This adds GICC ACPI subtable for GICv3, but set GICC base address only when gic_version == 2 since it donesn't need GICC base address for GICv3. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 1446131773-5018-1-git-send-email-shannon.zhao@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03hw/arm/virt-acpi-build: _CCA attribute is compulsoryGraeme Gregory
According to ACPI specification 6.2.17 _CCA (Cache Coherency Attribute) this attribute is compulsory on ARM systems. Add this attribute to the PCI host bridges as required. Without this the kernel will produce the error [Firmware Bug]: PCI device 0000:00:00.0 fail to setup DMA. Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org> Message-id: 1446460786-13663-1-git-send-email-graeme.gregory@linaro.org Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03target-arm: Report S/NS status in the CPU debug logsPeter Maydell
If this CPU supports EL3, enhance the printing of the current CPU mode in debug logging to distinguish S from NS modes as appropriate. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1445883178-576-3-git-send-email-peter.maydell@linaro.org
2015-11-03target-arm: Bring AArch64 debug CPU display of PSTATE into line with AArch32Peter Maydell
The AArch64 debug CPU display of PSTATE as "PSTATE=200003c5 (flags --C-)" on the end of the same line as the last of the general purpose registers is unnecessarily different from the AArch32 display of PSR as "PSR=200001d3 --C- A svc32" on its own line. Update the AArch64 code to put PSTATE in its own line and in the same format, including printing the exception level (mode). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1445883178-576-2-git-send-email-peter.maydell@linaro.org
2015-11-03MAINTAINERS: Add new qemu-arm mailing list to ARM related entriesPeter Maydell
We now have a qemu-arm mailing list for ARM patches and discussion, so add an L: entry for it to the various ARM related entries in MAINTAINERS. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 1446129661-5239-1-git-send-email-peter.maydell@linaro.org
2015-11-03arm: stellaris: exit on external reset requestMichael Davidsaver
Add GPIO in for the stellaris board which calls qemu_system_reset_request() on reset request. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03armv7-m: Implement SYSRESETREQMichael Davidsaver
Implement the SYSRESETREQ bit of the AIRCR register for armv7-m (ie. cortex-m3) to trigger a GPIO out. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03armv7-m: Return DeviceState* from armv7m_init()Michael Davidsaver
Change armv7m_init to return the DeviceState* for the NVIC. This allows access to all GPIO blocks, not just the IRQ inputs. Move qdev_get_gpio_in() calls out of armv7m_init() into board code for stellaris and stm32f205 boards. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03arm: xilinx_zynq: Add linux pre-bootPeter Crosthwaite
Add a Linux-specific pre-boot routine that matches the device- specific bootloaders behaviour. This is needed for modern Linux that expects the ARM PLL in SLCR to be a more even value (not 26). Cc: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 9a9025ea65572586b50dca4e5819032e3c436d64.1446182614.git.crosthwaite.peter@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03arm: boot: Add board specific setup code APIPeter Crosthwaite
Add an API for boards to inject their own preboot software (or firmware) sequence. The software then returns to the bootloader via the link register. This allows boards to do their own little bits of firmware setup without needed to replace the bootloader completely (which is the requirement for existing firmware support). The blob is loaded by a callback if and only if doing a linux boot (similar to the existing write_secondary support). Rewrite the comment for the primary boot blob. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 070295644c6ac84696d743913296e8cfefb48c15.1446182614.git.crosthwaite.peter@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03arm: boot: Adjust indentation of FIXUP commentsPeter Crosthwaite
These comments start immediately after the current longest name in the list. Tab them out to the next tab stop to give a little breathing room and prepare for FIXUP_BOARD_SETUP which will require more indent. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: b9b9bb8f1c307c1ef8a3f26ff1f34fabb34b332e.1446182614.git.crosthwaite.peter@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03target-arm: Add and use symbolic names for register banksSoren Brinkmann
Add BANK_<cpumode> #defines to index banked registers. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03usb-host: fix usb3ep0quirk testGerd Hoffmann
usb->speed is the usb speed the device is actually running on in the qemu emulation (i.e. from the guests point of view). So when plugging usb3 devices into ehci hostadapter this is HIGH not SUPER. To figure whenever the host talks to the device with superspeed we have to check speedmask instead and see whenever the superspeed bit is set there. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1445603230-11840-1-git-send-email-kraxel@redhat.com
2015-11-03ehci: clear suspend bit on detachGerd Hoffmann
When a device is detached, clear the suspend bit (PORTSC_SUSPEND) in the port status register. The specs are not *that* clear what is supposed to happen in case a suspended device is unplugged. But the enable bit (PORTSC_PED) is cleared, and the specs mention setting suspend with enable being unset is undefined behavior. So clearing them both looks reasonable, and it actually fixes the reported bug. https://bugzilla.redhat.com/show_bug.cgi?id=1268879 Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Message-id: 1445413462-18004-1-git-send-email-kraxel@redhat.com
2015-11-03Merge remote-tracking branch 'remotes/kraxel/tags/pull-ui-20151103-1' into ↵Peter Maydell
staging ui: fixes for vnc, opengl and curses. # gpg: Signature made Tue 03 Nov 2015 09:53:24 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-ui-20151103-1: vnc: fix bug: vnc server can't start when 'to' is specified vnc: allow fall back to RAW encoding ui/opengl: Reduce build required libraries for opengl ui/curses: Fix pageup/pagedown on -curses ui/curses: Support line graphics chars on -curses mode ui/curses: Fix monitor color with -curses when 256 colors Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03vnc: fix bug: vnc server can't start when 'to' is specifiedYang Hongyang
commit e0d03b8ceb52 converted VNC startup to use SocketAddress, the interface socket_listen don't have a port_offset param, so we need to add the port offset (5900) to both 'port' and 'to' opts. currently only 'port' is added by offset. This patch add the port offset to 'to' opts. Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1445926252-14830-1-git-send-email-hongyang.yang@easystack.cn Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-11-03vnc: allow fall back to RAW encodingPeter Lieven
I have observed that depending on the contents and the encoding it happens that sending data as RAW sometimes would take less space than the encoded data. This is especially the case for small updates or areas with high color images. If sending RAW encoded data is beneficial allow a fall back to RAW encoding for the framebuffer update. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-11-03ui/opengl: Reduce build required libraries for openglOGAWA Hirofumi
We now use epoxy to load opengl libraries. This means we don't need to link opengl libraries directly if interfaces handled by epoxy. With this, we just need epoxy headers and epoxy's *.so to build. Tested with epoxy-1.3.1. - sdl2/gtk/console egl stuff doesn't require other than epoxy - milkymist-tmu2 glx stuff doesn't require other than epoxy (lm32 test is limited, because can't find mmone-bios.bin, so just test to load libGL with "./lm32-softmmu/qemu-system-lm32 -M milkymist,accel=qtest") Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> [ lm32 tested by kraxel ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-11-03ui/curses: Fix pageup/pagedown on -cursesOGAWA Hirofumi
Current KEY_NPAGE/KEY_PPAGE handling is broken on -curses. Those uses "GREY", but "KEY_MASK" masked out "GREY". To fix, we have to use correct mask value - SCANCODE_KEYMASK. Then, this adds support of "shift + pageup/pagedown". With this, -curses mode can use scroll-up/down as usual like other display modes. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-11-03ui/curses: Support line graphics chars on -curses modeOGAWA Hirofumi
This converts vga code to curses code in console_write_bh(). With this changes, we can see line graphics (for example, dialog uses) correctly. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-11-03ui/curses: Fix monitor color with -curses when 256 colorsOGAWA Hirofumi
If TERM=xterm-256color, COLOR_PAIRS==256 and monitor passes chtype like 0x74xx. Then, the code uses uninitialized color pair. As result, monitor uses black for both of fg and bg color, i.e. terminal is filled by black. To fix, this initialize above than 64 with default color (fg=white,bg=black). FIXME: on 256 color, curses may be possible better vga color emulation. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-11-03vl.c: Use "%s support is disabled" error messages consistentlyEduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1446217682-24421-12-git-send-email-ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-03vl.c: Improve warnings on use of deprecated optionsEduardo Habkost
Simplify warnings about deprecated options by rewriting them as "warning: ignoring deprecated option". Reword -no-kvm-pit-reinjection deprecation warning. Suggested-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1446217682-24421-10-git-send-email-ehabkost@redhat.com> [Squashed in Message-Id: <1446217682-24421-11-git-send-email-ehabkost@redhat.com> and updated commit message] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-03vl.c: Touch up error messagesEduardo Habkost
Several small improvements: * Use "cannot" instead of "can not" * Use 'quotes' instead of `quotes' * Change "fail to parse" error message to "failed to parse" Suggested-by: Eric Blake <eblake@redhat.com> Suggested-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1446217682-24421-6-git-send-email-ehabkost@redhat.com> [Squashed in Message-Id: <1446217682-24421-7-git-send-email-ehabkost@redhat.com> Message-Id: <1446217682-24421-9-git-send-email-ehabkost@redhat.com> and updated commit message] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-03vl.c: Remove unnecessary uppercase in error messagesEduardo Habkost
Suggested-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1446217682-24421-8-git-send-email-ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-03vl.c: Use "warning:" prefix consistently on warningsEduardo Habkost
Suggested-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1446217682-24421-5-git-send-email-ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-03vl.c: Remove periods and exclamation points from error messagesEduardo Habkost
Except for removing periods and exclamation points, no other changes were made to the error messages (yet). Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1446217682-24421-4-git-send-email-ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-03vl.c: Replace fprintf(stderr) with error_report()Eduardo Habkost
Straightforward replacement, except for qemu_kill_report(), which printed a common part of its error message first, then the applicable special part. Print each complete message with a single error_report() instead. Multi-line messages were replaced by error_report() followed by error_printf(). The following changes were made to the error messages: * The "invalid date format" message was reworded to better fit the new error_report()+error_printf() pattern. * On the remaining messages, only the trailing newlines, "qemu:" and "error:" message prefixes were removed. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1446217682-24421-2-git-send-email-ehabkost@redhat.com> [Squashed in Message-Id: <1446217682-24421-3-git-send-email-ehabkost@redhat.com> and updated commit message] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-02Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2015-11-02' into ↵Peter Maydell
staging QAPI patches # gpg: Signature made Mon 02 Nov 2015 09:07:23 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-qapi-2015-11-02: (25 commits) qapi: Simplify gen_struct_field() qapi: Reserve 'u' member name qapi: Finish converting to new qapi union layout tpm: Convert to new qapi union layout memory: Convert to new qapi union layout input: Convert to new qapi union layout char: Convert to new qapi union layout net: Convert to new qapi union layout sockets: Convert to new qapi union layout block: Convert to new qapi union layout tests: Convert to new qapi union layout qapi-visit: Convert to new qapi union layout qapi: Start converting to new qapi union layout qapi-visit: Remove redundant functions for flat union base qapi: Unbox base members qapi: Prefer typesafe upcasts to qapi base classes qapi-types: Refactor base fields output qapi-visit: Split off visit_type_FOO_fields forward decl vnc: Hoist allocation of VncBasicInfo to callers qapi: Reserve 'q_*' and 'has_*' member names ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-02qapi: Simplify gen_struct_field()Eric Blake
Rather than having all callers pass a name, type, and optional flag, have them instead pass a QAPISchemaObjectTypeMember which already has all that information. No change to generated code. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-25-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-02qapi: Reserve 'u' member nameEric Blake
Now that we have separated union tag values from colliding with non-variant C names, by naming the union 'u', we should reserve this name for our use. Note that we want to forbid 'u' even in a struct with no variants, because it is possible for a future qemu release to extend QMP in a backwards-compatible manner while converting from a struct to a flat union. Fortunately, no existing clients were using this member name. If we ever find the need for QMP to have a member 'u', we could at that time relax things, perhaps by having c_name() munge the QMP member to 'q_u'. Note that we cannot forbid 'u' everywhere (by adding the rejection code to check_name()), because the existing QKeyCode enum already uses it; therefore we only reserve it as a struct type member name. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-24-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-02qapi: Finish converting to new qapi union layoutEric Blake
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. This patch is the back end for a series that converts to a saner qapi union layout. Now that all clients have been converted to use 'type' and 'obj->u.value', we can drop the temporary parallel support for 'kind' and 'obj->value'. Given a simple union qapi type: { 'union':'Foo', 'data': { 'a':'int', 'b':'bool' } } this is the overall effect, when compared to the state before this series of patches: | struct Foo { |- FooKind kind; |- union { /* union tag is @kind */ |+ FooKind type; |+ union { /* union tag is @type */ | void *data; | int64_t a; | bool b; |- }; |+ } u; | }; The testsuite still contains some examples of artificial restrictions (see flat-union-clash-type.json, for example) that are no longer technically necessary, now that there is no longer a collision between enum tag values and non-variant member names; but fixing this will be done in later patches, in part because some further changes are required to keep QAPISchema*.check() from asserting. Also, a later patch will add a reservation for the member name 'u' to avoid a collision between a user's non-variant names and our internal choice of C union name. Note, however, that we do not rename the generated enum, which is still 'FooKind'. A further patch could generate implicit enums as 'FooType', but while the generator already reserved the '*Kind' namespace (commit 4dc2e69), there are already QMP constructs with '*Type' naming, which means changing our reservation namespace would have lots of churn to C code to deal with a forced name change. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-23-git-send-email-eblake@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-02tpm: Convert to new qapi union layoutEric Blake
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for TPM-related code. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-22-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-02memory: Convert to new qapi union layoutEric Blake
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for memory-related code. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-21-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-30 21:13:48 +0000