aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-08-11unicore32: Disintegrate cpu_dump_state_ucf64 functionGuan Xuetao
This patch disintegrates cpu_dump_state_ucf64 function from cpu_dump_state. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32: Split UniCore-F64 instruction helpers from helper.cGuan Xuetao
This patch just splits ucf64 instruction simulation helpers from helper.c. Also, two checkpatch warnings are solved. v1->v2: adjust copyright information for new ucf64_helper.c Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add is_default setting for puv3 machineGuan Xuetao
This patch sets is_default to 1 for puv3 machine, so that find_default_machine() returns puv3 machine. Thanks Dunrong for pointing it out. Cc: Dunrong Huang <riegamaths@gmail.com> Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add maintainer information for UniCore32 machineGuan Xuetao
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add ps2 supportGuan Xuetao
This patch adds ps2/keyboard support, and enables CONFIG_PCKBD. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add puv3 dma supportGuan Xuetao
This patch adds puv3 dma (Direct Memory Access) support, include dma device simulation for kernel booting. v1->v2: Add initialization to ret in puv3_dma_read. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add puv3 pm supportGuan Xuetao
This patch adds puv3 pm (power management) support, include pm device simulation for kernel booting. Thank Blue Swirl for pointing out the missing "break". v1->v2: Add initialization to ret in puv3_pm_read. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add puv3 gpio supportGuan Xuetao
This patch adds puv3 gpio (General Purpose Input/Output) support, include gpio device simulation and its interrupt support. v1->v2: Add initialization to ret in puv3_gpio_read. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add puv3 ostimer supportGuan Xuetao
This patch adds puv3 ostimer support, include os timer device simulation and ptimer support in puv3 machine. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add puv3 interrupt supportGuan Xuetao
This patch adds puv3 interrupt support, include interrupt controler device simulation and interrupt handler in puv3 machine. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add puv3 soc/board supportGuan Xuetao
This patch only add puv3 soc/board support, which introduces puv3 machine description, and specifies console type. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Make sure that kernel can access user spaceGuan Xuetao
As a matter of course, we need to access user space in kernel code, so we need to correct load/store decoders to indicate correct memory region. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Implement softmmu specific functionsGuan Xuetao
This patch implements softmmu specific functions, include tlb_fill, switch_mode, do_interrupt and uc32_cpu_handle_mmu_fault. So the full exception handlers and page table walking could work now. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11target-unicore32: Drop UC32_CPUID macrosAndreas Färber
Any code that depends on a particular CPU type can now go through callbacks on the QOM UniCore32CPUClass. Signed-off-by: Andreas Färber <afaerber@suse.de Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Make UniCore32 cpuid & exceptions correct and runableGuan Xuetao
This patch initializes the cpuid to exactly correct value because linux kernel will check it. In addition, the exception types are specified in proper situations. Then it could make exceptions generated correctly and timely. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add coprocessor 0(sysctrl) and 1(ocd) instruction supportGuan Xuetao
Coprocessor 0 is system control coprocessor, and we need get/set its contents. Also, all cache/tlb ops shoule be implemented here, but just ignored with no harm. Coprocessor 1 is OCD (on-chip-debugger), which is used for faked console, so we could output chars to this console without graphic card. TODO: curses display should be added lator for screen output. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add unicore32-softmmu build supportGuan Xuetao
This patch adds unicore32-softmmu build support, include configure, makefile, arch_init, and all missing functions needed by softmmu. Although all missing functions are empty, unicore32-softmmu could be build successfully. By 20120804: change QEMU_ARCH_UNICORE32 to 0x4000 Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09handle device help before accelerator set upBruce Rogers
A command line device probe using just -device "?" gets processed after qemu-kvm initializes the accelerator. If /dev/kvm is not present, the accelerator check will fail (kvm is defaulted to on), which causes libvirt to not be set up to handle qemu guests. Moving the device help handling before the accelerator set up allows the device probe to work in this configuration and libvirt succeeds in setting up for a qemu hypervisor mode. Signed-off-by: Bruce Rogers <brogers@suse.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09Merge branch 'x86cpu_qom_tcg_v2' of git://github.com/imammedo/qemuBlue Swirl
* 'x86cpu_qom_tcg_v2' of git://github.com/imammedo/qemu: target-i386: move tcg initialization into x86_cpu_initfn() cleanup cpu_set_debug_excp_handler target-xtensa: drop usage of prev_debug_excp_handler target-i386: drop usage of prev_debug_excp_handler
2012-08-09qemu_rearm_alarm_timer: do not call rearm if the next deadline is INT64_MAXStefano Stabellini
qemu_rearm_alarm_timer partially duplicates the code in qemu_next_alarm_deadline to figure out if it needs to rearm the timer. If it calls qemu_next_alarm_deadline, it always rearms the timer even if the next deadline is INT64_MAX. This patch simplifies the behavior of qemu_rearm_alarm_timer and removes the duplicated code, always calling qemu_next_alarm_deadline and only rearming the timer if the deadline is less than INT64_MAX. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Tested-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09target-xtensa: make 'sim' to be the default machineMax Filippov
This fixes the following error: $ qemu-system-xtensa -cpu help Segmentation fault Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09target-xtensa: make default CPU depend on target endiannessMax Filippov
This makes usable default for -cpu option both for qemu-system-xtensa and qemu-system-xtensaeb fixing the following error: $ qemu-system-xtensaeb -M sim Unable to find CPU definition Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09MIPS: Correct FCR0 initializationNathan Froyd
This change addresses a problem where QEMU incorrectly traps on floating-point MADD group instructions with SIGILL, at least while emulating MIPS32r2 processors. These instructions use the COP1X major opcode and include ones like: madd.d $f2,$f4,$f2,$f6 Here's Nathan's original analysis of the problem: "QEMU essentially does: d = find_cpu (cpu_string) // get CPU definition fpu_init (env, d) // initialize fpu state (init FCR0, basically) cpu_reset (env) ...and the cpu_reset call clears all interesting state that fpu_init setup, then proceeds to reinitialize all the CP0 registers...but not FCR0." I have verified this change with system emulation running the GDB test suite for the mips-sde-elf target (o32, big endian, 24Kf CPU emulated), there were 55 progressions and no regressions. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09scsi-bus: remove overlapping entryBlue Swirl
LOAD_UNLOAD and START_STOP have same value, so the table entry is initialized twice. Spotted by Clang compiler. Remove LOAD_UNLOAD entry since START_STOP entry already represents both. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09xilinx_axienet: avoid useless self-assignmentBlue Swirl
Statement s=s; makes little sense, remove it. Spotted by Clang compiler. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09user: fix accidental AREG0 useBlue Swirl
Global register AREG0 was always assumed to be usable in user-exec.c, but this is incorrect for several targets. Fix with #ifdeffery and by using other variables. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09qapi: avoid reserved keywordsBlue Swirl
Clang compiler complained about use of reserved word 'restrict' in SLIRP and QAPI. Prefix C keywords with "q_", adjust SLIRP accordingly. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09sparc: fix expression with uninitialized initial valueBlue Swirl
err was uninitialized, it's not OK to use |=. Spotted by Clang compiler. Fix by implementing the earlier statement which initializes the variable. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09sparc: fix floppy TC line setupBlue Swirl
The qemu_irq for Terminal Count (TC) line between FDC and Slavio misc device was created only after use, spotted by Clang compiler. Also, it was not created if the FDC didn't exist. Rearrange code to fix order. Always create the TC line. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09esp: add Tekram DC-390 emulation (PC SCSI adapter)Hervé Poussineau
Difference with AMD PCscsi is that DC-390 contains a EEPROM, and that a romfile is available to add INT13 support. This has been successfully tested on: - MS DOS 6.22 (using DC390 ASPI driver) - MS Windows 98 SE (using DC390 driver) - MS Windows NT 3.1 (using DC390 driver) - MS Windows NT 4.0 (using DC390 driver) - hard disk and cdrom boot Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09Revert "pci: add some stubs"Hervé Poussineau
This reverts commit 0883c5159f1df05d8761014f65451c3c3b77ebcf. Those stubs were only used by PCI ESP emulation, which is now not compiled on architectures which have no PCI bus support. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09esp: move PCI emulation to a new file esp-pci.cHervé Poussineau
sparc machines loose ability to instanciate PCI ESP SCSI adapter, which is not a big loose as they don't have PCI bus support. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09esp: move some definitions to header fileHervé Poussineau
These will be used by next commits. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-07Merge remote-tracking branch 'kraxel/usb.58' into stagingAnthony Liguori
* kraxel/usb.58: usb-storage: fix SYNCHRONIZE_CACHE usb-storage: improve debug logging
2012-08-07Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
* kwolf/for-anthony: qemu-img: use QemuOpts instead of QEMUOptionParameter in resize function qemu-iotests: Be more flexible with image creation options qemu-iotests: add 039 qcow2 lazy refcounts test qemu-io: add "abort" command to simulate program crash qcow2: implement lazy refcounts qemu-iotests: ignore qemu-img create lazy_refcounts output docs: add lazy refcounts bit to qcow2 specification qcow2: introduce dirty bit docs: add dirty bit to qcow2 specification qemu-iotests: add qed.py image manipulation utility qapi: generalize documentation of streaming commands ide scsi: Mess with geometry only for hard disk devices
2012-08-07usb-storage: fix SYNCHRONIZE_CACHEGerd Hoffmann
Commit 59310659073d85745854f2f10c4292555c5a1c51 is incomplete, we'll arrive in the scsi command complete callback in CSW state and must handle that case correctly. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-08-07usb-storage: improve debug loggingGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-08-06slirp: fix build on mingw32Anthony Liguori
in_addr_t isn't available on mingw32. Just use an unsigned long instead. I considered typedef'ing in_addr_t on mingw32 but this would potentially be brittle if mingw32 did introduce the type. Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-06qemu-img: use QemuOpts instead of QEMUOptionParameter in resize functionDong Xu Wang
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-06qemu-iotests: Be more flexible with image creation optionsKevin Wolf
qemu-iotests already filters out image creation options that may be present or not in order to get the same output in both cases. However, often it only considers the default value of the option. Cover all valid values instead so that ./check -o name=value can be used successfull for all of them. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-06qemu-iotests: add 039 qcow2 lazy refcounts testStefan Hajnoczi
This tests establishes the basic post-conditions of the qcow2 lazy refcounts features: 1. If the image was closed normally, it is marked clean. 2. If an allocating write was performed and the image was not closed normally, then it is marked dirty. a. Written data can be read back successfully. b. The image file can be repaired and will be marked clean again. c. The image file is automatically repaired when opened read/write. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-06qemu-io: add "abort" command to simulate program crashStefan Hajnoczi
Avoiding data loss and corruption is the top requirement for image file formats. The qemu-io "abort" command makes it possible to simulate program crashes and does not give the image format a chance to cleanly shut down. This command is useful for data integrity test cases. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-06qcow2: implement lazy refcountsStefan Hajnoczi
Lazy refcounts is a performance optimization for qcow2 that postpones refcount metadata updates and instead marks the image dirty. In the case of crash or power failure the image will be left in a dirty state and repaired next time it is opened. Reducing metadata I/O is important for cache=writethrough and cache=directsync because these modes guarantee that data is on disk after each write (hence we cannot take advantage of caching updates in RAM). Refcount metadata is not needed for guest->file block address translation and therefore does not need to be on-disk at the time of write completion - this is the motivation behind the lazy refcount optimization. The lazy refcount optimization must be enabled at image creation time: qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=on a.qcow2 10G qemu-system-x86_64 -drive if=virtio,file=a.qcow2,cache=writethrough Update qemu-iotests 031 and 036 since the extension header size changes when we add feature bit table entries. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-06qemu-iotests: ignore qemu-img create lazy_refcounts outputStefan Hajnoczi
Hide the default lazy_refcounts=off output from qemu-img like we do with other image creation options. This ensures that existing golden outputs continue to pass despite the new option that has been added. Note that this patch applies before the one that actually introduces the lazy_refcounts=on|off option. This ensures git-bisect(1) continues to work. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-06docs: add lazy refcounts bit to qcow2 specificationStefan Hajnoczi
The lazy refcounts bit indicates that this image can take advantage of the dirty bit and that refcount updates can be postponed. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-06qcow2: introduce dirty bitStefan Hajnoczi
This patch adds an incompatible feature bit to mark images that have not been closed cleanly. When a dirty image file is opened a consistency check and repair is performed. Update qemu-iotests 031 and 036 since the extension header size changes when we add feature bit table entries. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-06docs: add dirty bit to qcow2 specificationStefan Hajnoczi
The dirty bit will make it possible to perform lazy refcount updates, where the image file is not kept consistent all the time. Upon opening a dirty image file, it is necessary to perform a consistency check and repair any incorrect refcounts. Therefore the dirty bit must be an incompatible feature bit. We don't want old programs accessing a file with stale refcounts. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-06qemu-iotests: add qed.py image manipulation utilityStefan Hajnoczi
The qed.py utility can inspect and manipulate QED image files. It can be used for testing to see the state of image metadata and also to inject corruptions into the image file. It also has a scrubbing feature to copy just the metadata out of an image file, allowing users to share broken image files without revealing data in bug reports. This has lived in my local repo for a long time but could be useful to others. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-06qapi: generalize documentation of streaming commandsPaolo Bonzini
Talk about background operations in general, rather than specifically about streaming. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-06ide scsi: Mess with geometry only for hard disk devicesMarkus Armbruster
Legacy -drive cyls=... are now ignored completely when the drive doesn't back a hard disk device. Before, they were first checked against a hard disk's limits, then ignored. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-18 00:29:58 +0000