| Age | Commit message (Collapse) | Author |
|---|
|
Currently the qemu user-mode networking stack reads the host DNS
configuration (/etc/resolv.conf or the Windows equivalent) only once
when qemu starts. This causes name lookups in the guest to fail if the
host is moved to a different network from which the original DNS servers
are unreachable, a common occurrence when the host is a laptop.
This patch changes the slirp code to read the host DNS configuration on
demand, caching the results for at most 1 second to avoid unnecessary
overhead if name lookups occur in rapid succession. On non-Windows
hosts, /etc/resolv.conf is re-read only if the file has been replaced or
if its size or mtime has changed.
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Three problems with our_addr:
- It's determined only once when qemu starts, but the address can change
(just like the DNS configuration can).
- It's supposed to be the IP address of a host network interface, but
there's no guarantee that gethostbyname(gethostname()) actually does
that: the host might be a laptop that has only a loopback interface up,
or the hostname might be localhost.localdomain, etc.
- It's useless at best: get_dns_addr() calls it, there's no reason to
send DNS requests to a different IP address if you're running a DNS
server on the host and resolv.conf points to 127.0.0.1.
These problems are easily solved by removing the code.
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
With that patch applied "-balloon virtio,args" becomes a shortcut for
"-device virtio-balloon-pci,args".
Side effects:
- ballon device gains support for id=<tag>.
- ballon device is off by default now.
- initialization order changes, which may in different pci slot
assignment depending on the VM configuration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
create ide-microdrive.c and place microdrive support there.
only build ide-microdrive support for platforms using it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
create ide-mmio.c and place mmio support there.
only build ide-mmio support for platforms using it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
create ide-macio.c and place macio support there.
only build ide-macio support for platforms using it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
create ide-pci.c and place pci bus support there.
only build ide-pci support for platforms using it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix build (merge with isa mmio split)
|
|
create ide-isa.c and place isa bus support there.
only build ide-isa support for platforms using it.
also create ide.h header file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
move lots of IDE defines to the new file.
also make a bunch of functions non-static
and add declaration for them. Needed by
the following patches of this series.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The current IDE code uses an array of two IDEState structs to maintain
the IDE bus. This patch adds a IDEBus to be used instead and does a
bunch of cleanups:
* move ide bus state from IDEState to IDEBus.
* drop a bunch of ugly pointer arithmetics to figure the active
interface, explicitly save the interface number instead.
* add helper functions to save/restore idebus state.
It also fixes a save/restore bug: loadvm allways stores the command in
the master's IDEState, even when it was saved from the slave.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Use the new qemu_error() function in qdev.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Use the new qemu_error() function for virtio-blk-pci.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch adds some functions for error reporting to address the
problem that error messages should be routed to different destinations
depending on the context of the caller, i.e. monitor command errors
should go to the monitor, command line errors to stderr.
qemu_error() is a printf-like function to report errors.
qemu_errors_to_file() and qemu_errors_to_mon() switch the destination
for the error message to the specified file or monitor. When setting a
new destination the old one will be kept. One can switch back using
qemu_errors_to_previous(). i.e. it works like a stack.
main() calls qemu_errors_to_file(stderr), so errors go to stderr by
default. monitor callbacks are wrapped into qemu_errors_to_mon() +
qemu_errors_to_previous(), so any errors triggered by monitor commands
will go to the monitor.
Each thread has its own error message destination. qemu-kvm probably
should add a qemu_errors_to_file(stderr) call to the i/o-thread
initialization code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Sorry folks, but it has to be. One more of these invasive qdev patches.
We have a serious design bug in the qdev interface: device init
callbacks can't signal failure because the init() callback has no
return value. This patch fixes it.
We have already one case in-tree where this is needed:
Try -device virtio-blk-pci (without drive= specified) and watch qemu
segfault. This patch fixes it.
With usb+scsi being converted to qdev we'll get more devices where the
init callback can fail for various reasons.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Hello,
the real world issue is that the hardware allows sends up to 2600 bytes,
and for some reason FreeBSD sometimes sends frames larger than the
ethernet frame size (102+1460 is the maximum I have seen so far),
overflowing the on-stack tx buffer of the driver.
Independent of that, the code should avoid allowing the guest to
overwrite the stack.
This is a minimal patch to fix the issue (you could leave out the size
change of the buf array as well, networking still seems to work either
way). Obviously there are better ways to handle it, but a proper fix IMO
would involve first getting rid of the code duplication and given the
number of patches pending for that code I see no point in working on that now.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
If a flash file of size smaller than the flash size is specified in
the -pflash option, the block driver returns error. But the
pflash_cfi0x ignores the error. This results in a flash content of all
zeroes. And the simulation aborts while executing code.
This patch adds the checks for errors from bdrv_read and escalates it
to the calling code.
Signed-off-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
cpu_synchronize_state() is a little unreadable since the 'modified'
argument isn't self-explanatory. Simplify it by making it always
synchronize the kernel state into qemu, and automatically flush the
registers back to the kernel if they've been synchronized on this
exit.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
-watchdog NAME is now equivalent to -device NAME, except it treats
option argument '?' specially, and supports only one watchdog.
A side effect is that a device created with -watchdog may now receive
a different PCI address.
i6300esb is now available on any machine with a PCI bus, not just PCs.
ib700 is still PC only, but that could be changed easily.
The only remaining use of struct WatchdogTimerModel and
watchdog_add_model() is supporting '-watchdog ?'. Should be replaced
by searching device_info_list for watchdog devices when we can
identify them there.
Also fixes ib700 not to use vm_clock before it is initialized: in
wdt_ib700_init(), called from register_watchdogs(), which runs before
init_timers(). The bug made ib700_write_enable_reg() crash in
qemu_del_timer().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The bdrv_aio_{read,write} routines can return a NULL pointer when the
I/O submission fails. Currently we ignore this and will wait forever
for an I/O completion and leading to a hang of the guest.
I can easily reproduce this using the native Linux AIO patch, but it's
also possible using normal pthreads-based AIO.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Now that do have a nicer interface to work against we can add Linux native
AIO support. It's an extremly thing layer just setting up an iocb for
the io_submit system call in the submission path, and registering an
eventfd with the qemu poll handler to do complete the iocbs directly
from there.
This started out based on Anthony's earlier AIO patch, but after
estimated 42,000 rewrites and just as many build system changes
there's not much left of it.
To enable native kernel aio use the aio=native sub-command on the
drive command line. I have also added an option to qemu-io to
test the aio support without needing a guest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Currently the raw-posix.c code contains a lot of knowledge about the
asynchronous I/O scheme that is mostly implemented in posix-aio-compat.c.
All this code does not really belong here and is getting a bit in the
way of implementing native AIO on Linux.
So instead move all the guts of the AIO implementation into
posix-aio-compat.c (which might need a better name, btw).
There's now a very small interface between the AIO providers and raw-posix.c:
- an init routine is called from raw_open_common to return an AIO context
for this drive. An AIO implementation may either re-use one context
for all drives, or use a different one for each as the Linux native
AIO support will do.
- an submit routine is called from the aio_reav/writev methods to submit
an AIO request
There are no indirect calls involved in this interface as we need to
decide which one to call manually. We will only call the Linux AIO native
init function if we were requested to by vl.c, and we will only call
the native submit function if we are asked to and the request is properly
aligned. That's also the reason why the alignment check actually does
the inverse move and now goes into raw-posix.c.
The old posix-aio-compat.h headers is removed now that most of it's
content is private to posix-aio-compat.c, and instead we add a new
block/raw-posix-aio.h headers is created containing only the tiny interface
between raw-posix.c and the AIO implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
It isn't obvious what 'dvq' stands for. Since it's the output queue and
the corresponding input queue is called 'ivq', call this 'ovq'
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Remove some redundant definitions for PCI classes:
PCI_CLASS_SERIAL_OTHER already exists as PCI_CLASS_COMMUNICATION_OTHER
and PCI_CLASS_PROCESSOR_CO is redefined.
PCI_CLASS_SERIAL_OTHER is not used anywhere.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This uses a run_after_load() function, and VMSTATE_PCI_DEVICE()
It could be made smaller changing the type of pm_io_space_update()
to return an int.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This uses a variant of buffer, with extra checks. Also uses the new
support for cheking that a read value is less or equal than a field.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
It is needed for VMState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
We read the saved value and check that it is less or equal than the one
stored in the structure.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This uses STRUCT and BUFFER
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch adds support for static sized buffer and typecheks that the buffer is right.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This uses VARRAY and INT32_EQUAL values
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch add supports for variable sized arrays whose size is
another field of the state.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
We read the saved value and check that it is the same that the one
is stored in the structure.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch add supports for arrays of structs
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch adds support for saving one VMStateDescription from other
VMStateDescription.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch adds support for saving arrays inside the struct
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch adds support for saving pointers to values
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch introduces VMState infrastructure, to convert the save/load
functions of devices to a table approach. This new approach has the
following advantages:
- it is type-safe
- you can't have load/save functions out of sync
- will allows us to have new interesting commands, like dump <device>, that
shows all its internal state.
- Just now, the only added type is arrays, but we can add structures.
- Uses old load_state() function for loading old state.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
