Age | Commit message (Collapse) | Author |
|
This patch is initially based a patch from Nikolay Nikolaev.
This patch adds vhost-user multiple queue support, by creating a nc
and vhost_net pair for each queue.
Qemu exits if find that the backend can't support the number of requested
queues (by providing queues=# option). The max number is queried by a
new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol
feature VHOST_USER_PROTOCOL_F_MQ is present first.
The max queue check is done at vhost-user initiation stage. We initiate
one queue first, which, in the meantime, also gets the max_queues the
backend supports.
In older version, it was reported that some messages are sent more times
than necessary. Here we came an agreement with Michael that we could
categorize vhost user messages to 2 types: non-vring specific messages,
which should be sent only once, and vring specific messages, which should
be sent per queue.
Here I introduced a helper function vhost_user_one_time_request(), which
lists following messages as non-vring specific messages:
VHOST_USER_SET_OWNER
VHOST_USER_RESET_DEVICE
VHOST_USER_SET_MEM_TABLE
VHOST_USER_GET_QUEUE_NUM
For above messages, we simply ignore them when they are not sent the first
time.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
|
|
Minusing the idx with the base(dev->vq_index) for vhost-kernel, and
then adding it back for vhost-user doesn't seem right. Here introduces
a new method vhost_backend_get_vq_index() for getting the right vq
index for following vhost messages calls.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
|
|
This is for querying how many queues the backend supports if it has mq
support(when VHOST_USER_PROTOCOL_F_MQ flag is set from the quried
protocol features).
vhost_net_get_max_queues() is the interface to export that value, and
to tell if the backend supports # of queues user requested, which is
done in the following patch.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
|
|
Quote from Michael:
We really should rename VHOST_RESET_OWNER to VHOST_RESET_DEVICE.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
|
|
Support a separate bitmask for vhost-user protocol features,
and messages to get/set protocol features.
Invoke them at init.
No features are defined yet.
[ leverage vhost_user_call for request handling -- Yuanhan Liu ]
Signed-off-by: Michael S. Tsirkin <address@hidden>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
|
|
So that we could let vhost_user_call to handle extented requests,
such as VHOST_USER_GET/SET_PROTOCOL_FEATURES, instead of invoking
vhost_user_read/write and constructing the msg again by ourself.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
|
|
Let's enable revision 1 for virtio-ccw devices. We can always offer
VERSION_1 as drivers in legacy mode won't be able to see it anyway.
We have to introduce a way to set a lower maximum revision for a device
to accommodate the following cases:
- compat machines (to enforce legacy only)
- virtio-blk with scsi support (version 1 + scsi is fenced by common
code, with a user-configured max revision of 0 we can allow scsi
via not offering VERSION_1)
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We currently switch off the VERSION_1 feature bit if the guest has
not negotiated at least revision 1. As no feature bits beyond 31 are
valid however unless VERSION_1 has been negotiated, make sure that
legacy guests never see a feature bit beyond 31.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Wire up changing the ring size for virtio-1 devices.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We allow guests to change the size of the virtqueue rings by supplying
a number of buffers that is different from the number of buffers the
device was initialized with. Current code has some problems, however,
since reset does not reset the ringsizes to the default values (as this
is not saved anywhere).
Let's extend the core code to keep track of the default ringsizes and
migrate them once the guest changed them for any of the virtqueues
for a device.
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The existing default_machine_opts and default_display settings will
still apply to future machine classes. So it makes sense to move them to
pc_i440fx_machine_options() instead of keeping them in a
version-specific machine_options function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The existing default_machine_opts, default_display, no_floppy, and
no_tco settings will still apply to future machine classes. So it makes
sense to move them to pc_q35_machine_options() instead of keeping them
in a version-specific machine_options function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
After commit 019a3edbb25f1571e876f8af1ce4c55412939e5d ("virtio: make
features 64bit wide"). Device's guest_features was actually set after
vdc->load(). This breaks the assumption that device specific load()
function can check guest_features. For virtio-net, self announcement
and guest offloads won't work after migration.
Fixing this by defer them to virtio_net_load() where guest_features
were guaranteed to be set. Other virtio devices looks fine.
Fixes: 019a3edbb25f1571e876f8af1ce4c55412939e5d
("virtio: make features 64bit wide")
Cc: qemu-stable@nongnu.org
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
Being working on dataplane I notice something strange:
virtio_queue_get_avail_size() used a 64bit size index
for the calculation of the available ring size.
It is quite strange but it did work with the old calculation
of the avail ring, at most with performance penalty,
and I wonder where I missed something.
This patch let use a 16bit size as defined in virtio_ring.h
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
into staging
VFIO updates 2015-09-23
- Tracing improvements to use common prefixes for functional areas
- Quirks overhaul:
- Split PCI quirks to separate file
- Make them understandable and more extensible
- Improve use of MemoryRegions and eliminate use of target pagesize
- Eliminate build-time debugging, everything migrated to runtime opts
# gpg: Signature made Wed 23 Sep 2015 21:09:05 BST using RSA key ID 3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg: aka "Alex Williamson <alex@shazbot.org>"
# gpg: aka "Alex Williamson <alwillia@redhat.com>"
# gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>"
* remotes/awilliam/tags/vfio-update-20150923.0:
vfio/pci: Add emulated PCI IDs
vfio/pci: Cache vendor and device ID
vfio/pci: Move AMD device specific reset to quirks
vfio/pci: Remove old config window and mirror quirks
vfio/pci: Config mirror quirk
vfio/pci: Config window quirks
vfio/pci: Rework RTL8168 quirk
vfio/pci: Cleanup Nvidia 0x3d0 quirk
vfio/pci: Cleanup ATI 0x3c3 quirk
vfio/pci: Foundation for new quirk structure
vfio/pci: Cleanup ROM blacklist quirk
vfio/pci: Split quirks to a separate file
vfio/pci: Extract PCI structures to a separate header
vfio: Change polarity of our no-mmap option
vfio/pci: Make interrupt bypass runtime configurable
vfio/pci: Rename MSI/X functions for easier tracing
vfio/pci: Rename INTx functions for easier tracing
vfio/pci: Cleanup vfio_early_setup_msix() error path
vfio/pci: Cleanup RTL8168 quirk and tracing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Specifying an emulated PCI vendor/device ID can be useful for testing
various quirk paths, even though the behavior and functionality of
the device with bogus IDs is fully unsupportable. We need to use a
uint32_t for the vendor/device IDs, even though the registers
themselves are only 16-bit in order to be able to determine whether
the value is valid and user set.
The same support is added for subsystem vendor/device ID, though these
have the possibility of being useful and supported for more than a
testing tool. An emulated platform might want to impose their own
subsystem IDs or at least hide the physical subsystem ID. Windows
guests will often reinstall drivers due to a change in subsystem IDs,
something that VM users may want to avoid. Of course careful
attention would be required to ensure that guest drivers do not rely
on the subsystem ID as a basis for device driver quirks.
All of these options are added using the standard experimental option
prefix and should not be considered stable.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Simplify access to commonly referenced PCI vendor and device ID by
caching it on the VFIOPCIDevice struct.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This is just another quirk, for reset rather than affecting memory
regions. Move it to our new quirks file.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
These are now unused.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Re-implement our mirror quirk using the new infrastructure.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Config windows make use of an address register and a data register.
In VGA cards, these are often used to provide real mode code in the
BIOS an easy way to access MMIO registers since the window often
resides in an I/O port register. When the MMIO register has a mirror
of PCI config space, we need to trap those accesses and redirect them
to emulated config space.
The previous version of this functionality made use of a single
MemoryRegion and single match address. This version uses separate
MemoryRegions for each of the address and data registers and allows
for multiple match addresses. This is useful for Nvidia cards which
have two ranges which index into PCI config space.
The previous implementation is left for the follow-on patch for a more
reviewable diff.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Another rework of this quirk, this time to update to the new quirk
structure. We can handle the address and data registers with
separate MemoryRegions and a quirk specific data structure, making the
code much more understandable.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The Nvidia 0x3d0 quirk makes use of a two separate registers and gives
us our first chance to make use of separate memory regions for each to
simplify the code a bit.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This is an easy quirk that really doesn't need a data structure if
its own. We can pass vdev as the opaque data and access to the
MemoryRegion isn't required.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
VFIOQuirk hosts a single memory region and a fixed set of data fields
that try to handle all the quirk cases, but end up making those that
don't exactly match really confusing. This patch introduces a struct
intended to provide more flexibility and simpler code. VFIOQuirk is
stripped to its basics, an opaque data pointer for quirk specific
data and a pointer to an array of MemoryRegions with a counter. This
still allows us to have common teardown routines, but adds much
greater flexibility to support multiple memory regions and quirk
specific data structures that are easier to maintain. The existing
VFIOQuirk is transformed into VFIOLegacyQuirk, which further patches
will eliminate entirely.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Create a vendor:device ID helper that we'll also use as we rework the
rest of the quirks. Re-reading the config entries, even if we get
more blacklist entries, is trivial overhead and only incurred during
device setup. There's no need to typedef the blacklist structure,
it's a static private data type used once. The elements get bumped
up to uint32_t to avoid future maintenance issues if PCI_ANY_ID gets
used for a blacklist entry (avoiding an actual hardware match). Our
test loop is also crying out to be simplified as a for loop.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The default should be to allow mmap and new drivers shouldn't need to
expose an option or set it to other than the allocation default in
their initfn. Take advantage of the experimental flag to change this
option to the correct polarity.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Tracing is more effective when we can completely disable all KVM
bypass paths. Make these runtime rather than build-time configurable.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This allows vfio_msi* tracing. The MSI/X interrupt tracing is also
pulled out of #ifdef DEBUG_VFIO to avoid a recompile for tracing this
path. A few cycles to read the message is hardly anything if we're
already in QEMU.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Rename functions and tracing callbacks so that we can trace vfio_intx*
to see all the INTx related activities.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
With the addition of the Chelsio quirk we have an error path out of
vfio_early_setup_msix() that doesn't free the allocated VFIOMSIXInfo
struct. This doesn't introduce a leak as it still gets freed in the
vfio_put_device() path, but it's complicated and sloppy to rely on
that. Restructure to free the allocated data on error and only link
it into the vdev on success.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
|
|
There's quite a bit of cleanup that can be done to the RTL8168 quirk,
as well as the tracing to prevent a spew of uninteresting accesses
for anything else the driver might choose to use the window registers
for besides the MSI-X table. There should be no functional change,
but it's now possible to get compact and useful traces by enabling
vfio_rtl8168_quirk*, ex:
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f000
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f000
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0xfee0100c
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f004
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f004
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x0
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f008
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f008
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x49b1
vfio_rtl8168_quirk_write 0000:04:00.0 [address]: 0x1f00c
vfio_rtl8168_quirk_read 0000:04:00.0 [address]: 0x8001f00c
vfio_rtl8168_quirk_read 0000:04:00.0 [data]: 0x0
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
staging
sPAPR Patch Queue: 2015-09-23
Highlights:
* pseries-2.5 machine type
* Memory hotplug for "pseries" guests
* Fixes to the PAPR Dynamic Reconfiguration hotplug code
* Several PAPR compliance fixes
* New SLOF with:
* GPT support
* Much faster VGA handling
# gpg: Signature made Wed 23 Sep 2015 02:50:10 BST using DSA key ID FDDA6FC6
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F730 2185 38B4 D13E FD80 34F2 6882 CAC6 FDDA 6FC6
* remotes/dgibson/tags/spapr-next-20150923: (36 commits)
sPAPR: Enable EEH on VFIO PCI device only
sPAPR: Revert don't enable EEH on emulated PCI devices
ppc/spapr: Implement H_RANDOM hypercall in QEMU
ppc/spapr: Fix buffer overflow in spapr_populate_drconf_memory()
spapr: Fix default NUMA node allocation for threads
spapr: Move memory hotplug to RTAS_LOG_V6_HP_ID_DRC_COUNT type
spapr: Support hotplug by specifying DRC count
spapr: Revert to memory@XXXX representation for non-hotplugged memory
spapr: Populate ibm,associativity-lookup-arrays correctly for non-NUMA
spapr: Provide better error message when slots exceed max allowed
spapr: Don't allow memory hotplug to memory less nodes
spapr: Memory hotplug support
spapr: Make hash table size a factor of maxram_size
spapr: Support ibm,dynamic-reconfiguration-memory
spapr: Add LMB DR connectors
spapr: Use QEMU limit for maximum CPUs number
spapr: Don't use QOM [*] syntax for DR connectors.
spapr_drc: use RTAS return codes for methods called by RTAS
spapr: Initialize hotplug memory address space
spapr_drc: don't allow 'empty' DRCs to be unisolated or allocated
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This checks if the PCI device retrieved from the PCI device address
is VFIO PCI device when enabling EEH functionality. If it's not
VFIO PCI device, the EEH functonality isn't enabled.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
This reverts commit 7cb18007 ("sPAPR: Don't enable EEH on emulated
PCI devices") as rtas_ibm_set_eeh_option() isn't the right place
to check if there has the corresponding PCI device for the input
address, which can be PE address, not PCI device address.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The PAPR interface defines a hypercall to pass high-quality
hardware generated random numbers to guests. Recent kernels can
already provide this hypercall to the guest if the right hardware
random number generator is available. But in case the user wants
to use another source like EGD, or QEMU is running with an older
kernel, we should also have this call in QEMU, so that guests that
do not support virtio-rng yet can get good random numbers, too.
This patch now adds a new pseudo-device to QEMU that either
directly provides this hypercall to the guest or is able to
enable the in-kernel hypercall if available. The in-kernel
hypercall can be enabled with the use-kvm property, e.g.:
qemu-system-ppc64 -device spapr-rng,use-kvm=true
For handling the hypercall in QEMU instead, a "RngBackend" is
required since the hypercall should provide "good" random data
instead of pseudo-random (like from a "simple" library function
like rand() or g_random_int()). Since there are multiple RngBackends
available, the user must select an appropriate back-end via the
"rng" property of the device, e.g.:
qemu-system-ppc64 -object rng-random,filename=/dev/hwrng,id=gid0 \
-device spapr-rng,rng=gid0 ...
See http://wiki.qemu-project.org/Features-Done/VirtIORNG for
other example of specifying RngBackends.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The buffer that is allocated in spapr_populate_drconf_memory()
is used for setting both, the "ibm,dynamic-memory" and the
"ibm,associativity-lookup-arrays" property. However, only the
size of the first one is taken into account when allocating the
memory. So if the length of the second property is larger than
the length of the first one, we run into a buffer overflow here!
Fix it by taking the length of the second property into account,
too.
Fixes: "spapr: Support ibm,dynamic-reconfiguration-memory" patch
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
At present, if guest numa nodes are requested, but the cpus in each node
are not specified, spapr just uses the default behaviour or assigning each
vcpu round-robin to nodes.
If smp_threads != 1, that will assign adjacent threads in a core to
different NUMA nodes. As well as being just weird, that's a configuration
that can't be represented in the device tree we give to the guest, which
means the guest and qemu end up with different ideas of the NUMA topology.
This patch implements mc->cpu_index_to_socket_id in the spapr code to
make sure vcpus get assigned to nodes only at the socket granularity.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
|
|
Till now memory hotplug used RTAS_LOG_V6_HP_ID_DRC_INDEX hotplug type
which meant that we generated one hotplug type of EPOW event for every
256MB (SPAPR_MEMORY_BLOCK_SIZE). This quickly overruns the kernel
rtas log buffer thus resulting in loss of memory hotplug events. Switch
to RTAS_LOG_V6_HP_ID_DRC_COUNT hotplug type for memory so that we
generate only one event per hotplug request.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Support hotplug identifier type RTAS_LOG_V6_HP_ID_DRC_COUNT that allows
hotplugging of DRCs by specifying the DRC count.
While we are here, rename
spapr_hotplug_req_add_event() to spapr_hotplug_req_add_by_index()
spapr_hotplug_req_remove_event() to spapr_hotplug_req_remove_by_index()
so that they match with spapr_hotplug_req_add_by_count().
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Don't represent non-hotluggable memory under drconf node. With this
we don't have to create DRC objects for them.
The effect of this patch is that we revert back to memory@XXXX representation
for all the memory specified with -m option and represent the cold
plugged memory and hot-pluggable memory under
ibm,dynamic-reconfiguration-memory.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
When NUMA isn't configured explicitly, assume node 0 is present for
the purpose of creating ibm,associativity-lookup-arrays property
under ibm,dynamic-reconfiguration-memory DT node. This ensures that
the associativity index property is correctly updated in ibm,dynamic-memory
for the LMB that is hotplugged.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Currently when user specifies more slots than allowed max of
SPAPR_MAX_RAM_SLOTS (32), we error out like this:
qemu-system-ppc64: unsupported amount of memory slots: 64
Let the user know about the max allowed slots like this:
qemu-system-ppc64: Specified number of memory slots 64 exceeds max supported 32
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Currently PowerPC kernel doesn't allow hot-adding memory to memory-less
node, but instead will silently add the memory to the first node that has
some memory. This causes two unexpected behaviours for the user.
- Memory gets hotplugged to a different node than what the user specified.
- Since pc-dimm subsystem in QEMU still thinks that memory belongs to
memory-less node, a reboot will set things accordingly and the previously
hotplugged memory now ends in the right node. This appears as if some
memory moved from one node to another.
So until kernel starts supporting memory hotplug to memory-less
nodes, just prevent such attempts upfront in QEMU.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Make use of pc-dimm infrastructure to support memory hotplug
for PowerPC.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The hash table size is dependent on ram_size, but since with hotplug
the memory can grow till maxram_size. Hence make hash table size dependent
on maxram_size.
This allows to hotplug huge amounts of memory to the guest.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Parse ibm,architecture.vec table obtained from the guest and enable
memory node configuration via ibm,dynamic-reconfiguration-memory if guest
supports it. This is in preparation to support memory hotplug for
sPAPR guests.
This changes the way memory node configuration is done. Currently all
memory nodes are built upfront. But after this patch, only memory@0 node
for RMA is built upfront. Guest kernel boots with just that and rest of
the memory nodes (via memory@XXX or ibm,dynamic-reconfiguration-memory)
are built when guest does ibm,client-architecture-support call.
Note: This patch needs a SLOF enhancement which is already part of
SLOF binary in QEMU.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|