diff options
Diffstat (limited to 'target-arm')
-rw-r--r-- | target-arm/cpu-qom.h | 9 | ||||
-rw-r--r-- | target-arm/cpu.c | 7 | ||||
-rw-r--r-- | target-arm/cpu.h | 18 | ||||
-rw-r--r-- | target-arm/helper.c | 256 | ||||
-rw-r--r-- | target-arm/machine.c | 8 |
5 files changed, 290 insertions, 8 deletions
diff --git a/target-arm/cpu-qom.h b/target-arm/cpu-qom.h index cf3658714e..9f47baebf8 100644 --- a/target-arm/cpu-qom.h +++ b/target-arm/cpu-qom.h @@ -86,6 +86,11 @@ typedef struct ARMCPU { uint64_t *cpreg_vmstate_values; int32_t cpreg_vmstate_array_len; + /* Timers used by the generic (architected) timer */ + QEMUTimer *gt_timer[NUM_GTIMERS]; + /* GPIO outputs for generic timer */ + qemu_irq gt_timer_outputs[NUM_GTIMERS]; + /* The instance init functions for implementation-specific subclasses * set these fields to specify the implementation-dependent values of * various constant registers and reset values of non-constant @@ -152,4 +157,8 @@ hwaddr arm_cpu_get_phys_page_debug(CPUState *cpu, vaddr addr); int arm_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg); int arm_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg); +/* Callback functions for the generic timer's timers. */ +void arm_gt_ptimer_cb(void *opaque); +void arm_gt_vtimer_cb(void *opaque); + #endif diff --git a/target-arm/cpu.c b/target-arm/cpu.c index 6f56aa86db..f01ce03682 100644 --- a/target-arm/cpu.c +++ b/target-arm/cpu.c @@ -203,6 +203,13 @@ static void arm_cpu_initfn(Object *obj) } else { qdev_init_gpio_in(DEVICE(cpu), arm_cpu_set_irq, 2); } + + cpu->gt_timer[GTIMER_PHYS] = qemu_new_timer(vm_clock, GTIMER_SCALE, + arm_gt_ptimer_cb, cpu); + cpu->gt_timer[GTIMER_VIRT] = qemu_new_timer(vm_clock, GTIMER_SCALE, + arm_gt_vtimer_cb, cpu); + qdev_init_gpio_out(DEVICE(cpu), cpu->gt_timer_outputs, + ARRAY_SIZE(cpu->gt_timer_outputs)); #endif if (tcg_enabled() && !inited) { diff --git a/target-arm/cpu.h b/target-arm/cpu.h index c2cb534dc7..f2abdf37ce 100644 --- a/target-arm/cpu.h +++ b/target-arm/cpu.h @@ -79,6 +79,21 @@ struct arm_boot_info; s<2n+1> maps to the most significant half of d<n> */ +/* CPU state for each instance of a generic timer (in cp15 c14) */ +typedef struct ARMGenericTimer { + uint64_t cval; /* Timer CompareValue register */ + uint32_t ctl; /* Timer Control register */ +} ARMGenericTimer; + +#define GTIMER_PHYS 0 +#define GTIMER_VIRT 1 +#define NUM_GTIMERS 2 + +/* Scale factor for generic timers, ie number of ns per tick. + * This gives a 62.5MHz timer. + */ +#define GTIMER_SCALE 16 + typedef struct CPUARMState { /* Regs for current mode. */ uint32_t regs[16]; @@ -146,6 +161,9 @@ typedef struct CPUARMState { uint32_t c13_tls1; /* User RW Thread register. */ uint32_t c13_tls2; /* User RO Thread register. */ uint32_t c13_tls3; /* Privileged Thread register. */ + uint32_t c14_cntfrq; /* Counter Frequency register */ + uint32_t c14_cntkctl; /* Timer Control register */ + ARMGenericTimer c14_timer[NUM_GTIMERS]; uint32_t c15_cpar; /* XScale Coprocessor Access Register */ uint32_t c15_ticonfig; /* TI925T configuration byte. */ uint32_t c15_i_max; /* Maximum D-cache dirty line index. */ diff --git a/target-arm/helper.c b/target-arm/helper.c index f8689e2e23..f4e1b06d23 100644 --- a/target-arm/helper.c +++ b/target-arm/helper.c @@ -695,15 +695,261 @@ static const ARMCPRegInfo v6k_cp_reginfo[] = { REGINFO_SENTINEL }; +#ifndef CONFIG_USER_ONLY + +static uint64_t gt_get_countervalue(CPUARMState *env) +{ + return qemu_get_clock_ns(vm_clock) / GTIMER_SCALE; +} + +static void gt_recalc_timer(ARMCPU *cpu, int timeridx) +{ + ARMGenericTimer *gt = &cpu->env.cp15.c14_timer[timeridx]; + + if (gt->ctl & 1) { + /* Timer enabled: calculate and set current ISTATUS, irq, and + * reset timer to when ISTATUS next has to change + */ + uint64_t count = gt_get_countervalue(&cpu->env); + /* Note that this must be unsigned 64 bit arithmetic: */ + int istatus = count >= gt->cval; + uint64_t nexttick; + + gt->ctl = deposit32(gt->ctl, 2, 1, istatus); + qemu_set_irq(cpu->gt_timer_outputs[timeridx], + (istatus && !(gt->ctl & 2))); + if (istatus) { + /* Next transition is when count rolls back over to zero */ + nexttick = UINT64_MAX; + } else { + /* Next transition is when we hit cval */ + nexttick = gt->cval; + } + /* Note that the desired next expiry time might be beyond the + * signed-64-bit range of a QEMUTimer -- in this case we just + * set the timer for as far in the future as possible. When the + * timer expires we will reset the timer for any remaining period. + */ + if (nexttick > INT64_MAX / GTIMER_SCALE) { + nexttick = INT64_MAX / GTIMER_SCALE; + } + qemu_mod_timer(cpu->gt_timer[timeridx], nexttick); + } else { + /* Timer disabled: ISTATUS and timer output always clear */ + gt->ctl &= ~4; + qemu_set_irq(cpu->gt_timer_outputs[timeridx], 0); + qemu_del_timer(cpu->gt_timer[timeridx]); + } +} + +static int gt_cntfrq_read(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t *value) +{ + /* Not visible from PL0 if both PL0PCTEN and PL0VCTEN are zero */ + if (arm_current_pl(env) == 0 && !extract32(env->cp15.c14_cntkctl, 0, 2)) { + return EXCP_UDEF; + } + *value = env->cp15.c14_cntfrq; + return 0; +} + +static void gt_cnt_reset(CPUARMState *env, const ARMCPRegInfo *ri) +{ + ARMCPU *cpu = arm_env_get_cpu(env); + int timeridx = ri->opc1 & 1; + + qemu_del_timer(cpu->gt_timer[timeridx]); +} + +static int gt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t *value) +{ + int timeridx = ri->opc1 & 1; + + if (arm_current_pl(env) == 0 && + !extract32(env->cp15.c14_cntkctl, timeridx, 1)) { + return EXCP_UDEF; + } + *value = gt_get_countervalue(env); + return 0; +} + +static int gt_cval_read(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t *value) +{ + int timeridx = ri->opc1 & 1; + + if (arm_current_pl(env) == 0 && + !extract32(env->cp15.c14_cntkctl, 9 - timeridx, 1)) { + return EXCP_UDEF; + } + *value = env->cp15.c14_timer[timeridx].cval; + return 0; +} + +static int gt_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + int timeridx = ri->opc1 & 1; + + env->cp15.c14_timer[timeridx].cval = value; + gt_recalc_timer(arm_env_get_cpu(env), timeridx); + return 0; +} +static int gt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t *value) +{ + int timeridx = ri->crm & 1; + + if (arm_current_pl(env) == 0 && + !extract32(env->cp15.c14_cntkctl, 9 - timeridx, 1)) { + return EXCP_UDEF; + } + *value = (uint32_t)(env->cp15.c14_timer[timeridx].cval - + gt_get_countervalue(env)); + return 0; +} + +static int gt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + int timeridx = ri->crm & 1; + + env->cp15.c14_timer[timeridx].cval = gt_get_countervalue(env) + + + sextract64(value, 0, 32); + gt_recalc_timer(arm_env_get_cpu(env), timeridx); + return 0; +} + +static int gt_ctl_read(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t *value) +{ + int timeridx = ri->crm & 1; + + if (arm_current_pl(env) == 0 && + !extract32(env->cp15.c14_cntkctl, 9 - timeridx, 1)) { + return EXCP_UDEF; + } + *value = env->cp15.c14_timer[timeridx].ctl; + return 0; +} + +static int gt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = arm_env_get_cpu(env); + int timeridx = ri->crm & 1; + uint32_t oldval = env->cp15.c14_timer[timeridx].ctl; + + env->cp15.c14_timer[timeridx].ctl = value & 3; + if ((oldval ^ value) & 1) { + /* Enable toggled */ + gt_recalc_timer(cpu, timeridx); + } else if ((oldval & value) & 2) { + /* IMASK toggled: don't need to recalculate, + * just set the interrupt line based on ISTATUS + */ + qemu_set_irq(cpu->gt_timer_outputs[timeridx], + (oldval & 4) && (value & 2)); + } + return 0; +} + +void arm_gt_ptimer_cb(void *opaque) +{ + ARMCPU *cpu = opaque; + + gt_recalc_timer(cpu, GTIMER_PHYS); +} + +void arm_gt_vtimer_cb(void *opaque) +{ + ARMCPU *cpu = opaque; + + gt_recalc_timer(cpu, GTIMER_VIRT); +} + static const ARMCPRegInfo generic_timer_cp_reginfo[] = { - /* Dummy implementation: RAZ/WI the whole crn=14 space */ - { .name = "GENERIC_TIMER", .cp = 15, .crn = 14, - .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_NO_MIGRATE, - .resetvalue = 0 }, + /* Note that CNTFRQ is purely reads-as-written for the benefit + * of software; writing it doesn't actually change the timer frequency. + * Our reset value matches the fixed frequency we implement the timer at. + */ + { .name = "CNTFRQ", .cp = 15, .crn = 14, .crm = 0, .opc1 = 0, .opc2 = 0, + .access = PL1_RW | PL0_R, + .fieldoffset = offsetof(CPUARMState, cp15.c14_cntfrq), + .resetvalue = (1000 * 1000 * 1000) / GTIMER_SCALE, + .readfn = gt_cntfrq_read, .raw_readfn = raw_read, + }, + /* overall control: mostly access permissions */ + { .name = "CNTKCTL", .cp = 15, .crn = 14, .crm = 1, .opc1 = 0, .opc2 = 0, + .access = PL1_RW, + .fieldoffset = offsetof(CPUARMState, cp15.c14_cntkctl), + .resetvalue = 0, + }, + /* per-timer control */ + { .name = "CNTP_CTL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 1, + .type = ARM_CP_IO, .access = PL1_RW | PL0_R, + .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].ctl), + .resetvalue = 0, + .readfn = gt_ctl_read, .writefn = gt_ctl_write, + .raw_readfn = raw_read, .raw_writefn = raw_write, + }, + { .name = "CNTV_CTL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 1, + .type = ARM_CP_IO, .access = PL1_RW | PL0_R, + .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].ctl), + .resetvalue = 0, + .readfn = gt_ctl_read, .writefn = gt_ctl_write, + .raw_readfn = raw_read, .raw_writefn = raw_write, + }, + /* TimerValue views: a 32 bit downcounting view of the underlying state */ + { .name = "CNTP_TVAL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 0, + .type = ARM_CP_NO_MIGRATE | ARM_CP_IO, .access = PL1_RW | PL0_R, + .readfn = gt_tval_read, .writefn = gt_tval_write, + }, + { .name = "CNTV_TVAL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 0, + .type = ARM_CP_NO_MIGRATE | ARM_CP_IO, .access = PL1_RW | PL0_R, + .readfn = gt_tval_read, .writefn = gt_tval_write, + }, + /* The counter itself */ + { .name = "CNTPCT", .cp = 15, .crm = 14, .opc1 = 0, + .access = PL0_R, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE | ARM_CP_IO, + .readfn = gt_cnt_read, .resetfn = gt_cnt_reset, + }, + { .name = "CNTVCT", .cp = 15, .crm = 14, .opc1 = 1, + .access = PL0_R, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE | ARM_CP_IO, + .readfn = gt_cnt_read, .resetfn = gt_cnt_reset, + }, + /* Comparison value, indicating when the timer goes off */ + { .name = "CNTP_CVAL", .cp = 15, .crm = 14, .opc1 = 2, + .access = PL1_RW | PL0_R, + .type = ARM_CP_64BIT | ARM_CP_IO, + .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval), + .resetvalue = 0, + .readfn = gt_cval_read, .writefn = gt_cval_write, + .raw_readfn = raw_read, .raw_writefn = raw_write, + }, + { .name = "CNTV_CVAL", .cp = 15, .crm = 14, .opc1 = 3, + .access = PL1_RW | PL0_R, + .type = ARM_CP_64BIT | ARM_CP_IO, + .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval), + .resetvalue = 0, + .readfn = gt_cval_read, .writefn = gt_cval_write, + .raw_readfn = raw_read, .raw_writefn = raw_write, + }, REGINFO_SENTINEL }; +#else +/* In user-mode none of the generic timer registers are accessible, + * and their implementation depends on vm_clock and qdev gpio outputs, + * so instead just don't register any of them. + */ +static const ARMCPRegInfo generic_timer_cp_reginfo[] = { + REGINFO_SENTINEL +}; + +#endif + static int par_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { if (arm_feature(env, ARM_FEATURE_LPAE)) { diff --git a/target-arm/machine.c b/target-arm/machine.c index 6d4c2d4ed0..5b6f3754ca 100644 --- a/target-arm/machine.c +++ b/target-arm/machine.c @@ -222,9 +222,9 @@ static int cpu_post_load(void *opaque, int version_id) const VMStateDescription vmstate_arm_cpu = { .name = "cpu", - .version_id = 12, - .minimum_version_id = 12, - .minimum_version_id_old = 12, + .version_id = 13, + .minimum_version_id = 13, + .minimum_version_id_old = 13, .pre_save = cpu_pre_save, .post_load = cpu_post_load, .fields = (VMStateField[]) { @@ -257,6 +257,8 @@ const VMStateDescription vmstate_arm_cpu = { VMSTATE_UINT32(env.exclusive_val, ARMCPU), VMSTATE_UINT32(env.exclusive_high, ARMCPU), VMSTATE_UINT64(env.features, ARMCPU), + VMSTATE_TIMER(gt_timer[GTIMER_PHYS], ARMCPU), + VMSTATE_TIMER(gt_timer[GTIMER_VIRT], ARMCPU), VMSTATE_END_OF_LIST() }, .subsections = (VMStateSubsection[]) { |