diff options
Diffstat (limited to 'qapi')
| -rw-r--r-- | qapi/block-core.json | 786 | ||||
| -rw-r--r-- | qapi/block.json | 14 | ||||
| -rw-r--r-- | qapi/char.json | 8 | ||||
| -rw-r--r-- | qapi/dump.json | 4 | ||||
| -rw-r--r-- | qapi/introspect.json | 12 | ||||
| -rw-r--r-- | qapi/job.json | 32 | ||||
| -rw-r--r-- | qapi/machine-target.json | 18 | ||||
| -rw-r--r-- | qapi/machine.json | 12 | ||||
| -rw-r--r-- | qapi/migration.json | 198 | ||||
| -rw-r--r-- | qapi/misc-target.json | 8 | ||||
| -rw-r--r-- | qapi/misc.json | 102 | ||||
| -rw-r--r-- | qapi/net.json | 22 | ||||
| -rw-r--r-- | qapi/qdev.json | 10 | ||||
| -rw-r--r-- | qapi/qom.json | 4 | ||||
| -rw-r--r-- | qapi/rocker.json | 12 | ||||
| -rw-r--r-- | qapi/run-state.json | 34 | ||||
| -rw-r--r-- | qapi/sockets.json | 8 | ||||
| -rw-r--r-- | qapi/trace.json | 16 | ||||
| -rw-r--r-- | qapi/transaction.json | 4 | ||||
| -rw-r--r-- | qapi/ui.json | 36 |
20 files changed, 670 insertions, 670 deletions
diff --git a/qapi/block-core.json b/qapi/block-core.json index c617bc2af6..c62b7db281 100644 --- a/qapi/block-core.json +++ b/qapi/block-core.json @@ -162,7 +162,7 @@ # @backing-image: info of the backing image (since 1.6) # # @format-specific: structure supplying additional format-specific -# information (since 1.7) +# information (since 1.7) # # Since: 1.3 # @@ -708,7 +708,7 @@ # Get a list of BlockInfo for all virtual block devices. # # Returns: a list of @BlockInfo describing each virtual block device. Filter -# nodes that were created implicitly are skipped over. +# nodes that were created implicitly are skipped over. # # Since: 0.14.0 # @@ -1352,8 +1352,8 @@ # @existing: QEMU should look for an existing image file. # # @absolute-paths: QEMU should create a new image with absolute paths -# for the backing file. If there is no backing file available, the new -# image will not be backed either. +# for the backing file. If there is no backing file available, the new +# image will not be backed either. # # Since: 1.1 ## @@ -1370,8 +1370,8 @@ # @node-name: graph node name to generate the snapshot from (Since 2.0) # # @snapshot-file: the target of the new overlay image. If the file -# exists, or if it is a device, the overlay will be created in the -# existing file/device. Otherwise, a new file will be created. +# exists, or if it is a device, the overlay will be created in the +# existing file/device. Otherwise, a new file will be created. # # @snapshot-node-name: the graph node name of the new image (Since 2.0) # @@ -1456,8 +1456,8 @@ # a node name is autogenerated. (Since: 4.2) # # Note: @on-source-error and @on-target-error only affect background -# I/O. If an error occurs during a guest write request, the device's -# rerror/werror actions will be used. +# I/O. If an error occurs during a guest write request, the device's +# rerror/werror actions will be used. # # Since: 4.2 ## @@ -1578,13 +1578,13 @@ # to verify "image-node-name" is in the chain # described by "device". # -# @device: The device name or node-name of the root node that owns -# image-node-name. +# @device: The device name or node-name of the root node that owns +# image-node-name. # -# @backing-file: The string to write as the backing file. This -# string is not validated, so care should be taken -# when specifying the string or the image chain may -# not be able to be reopened again. +# @backing-file: The string to write as the backing file. This +# string is not validated, so care should be taken +# when specifying the string or the image chain may +# not be able to be reopened again. # # Returns: Nothing on success # @@ -1605,7 +1605,7 @@ # @job-id: identifier for the newly-created block job. If # omitted, the device name will be used. (Since 2.7) # -# @device: the device name or node-name of a root node +# @device: the device name or node-name of a root node # # @base-node: The node name of the backing image to write data into. # If not specified, this is the deepest backing image. @@ -1625,36 +1625,36 @@ # node; other strings, even if addressing the same file, are not # accepted (deprecated, use @base-node instead) # -# @backing-file: The backing file string to write into the overlay -# image of 'top'. If 'top' is the active layer, -# specifying a backing file string is an error. This -# filename is not validated. -# -# If a pathname string is such that it cannot be -# resolved by QEMU, that means that subsequent QMP or -# HMP commands must use node-names for the image in -# question, as filename lookup methods will fail. -# -# If not specified, QEMU will automatically determine -# the backing file string to use, or error out if -# there is no obvious choice. Care should be taken -# when specifying the string, to specify a valid -# filename or protocol. -# (Since 2.1) -# -# If top == base, that is an error. -# If top == active, the job will not be completed by itself, -# user needs to complete the job with the block-job-complete -# command after getting the ready event. (Since 2.0) -# -# If the base image is smaller than top, then the base image -# will be resized to be the same size as top. If top is -# smaller than the base image, the base will not be -# truncated. If you want the base image size to match the -# size of the smaller top, you can safely truncate it -# yourself once the commit operation successfully completes. -# -# @speed: the maximum speed, in bytes per second +# @backing-file: The backing file string to write into the overlay +# image of 'top'. If 'top' is the active layer, +# specifying a backing file string is an error. This +# filename is not validated. +# +# If a pathname string is such that it cannot be +# resolved by QEMU, that means that subsequent QMP or +# HMP commands must use node-names for the image in +# question, as filename lookup methods will fail. +# +# If not specified, QEMU will automatically determine +# the backing file string to use, or error out if +# there is no obvious choice. Care should be taken +# when specifying the string, to specify a valid +# filename or protocol. +# (Since 2.1) +# +# If top == base, that is an error. +# If top == active, the job will not be completed by itself, +# user needs to complete the job with the block-job-complete +# command after getting the ready event. (Since 2.0) +# +# If the base image is smaller than top, then the base image +# will be resized to be the same size as top. If top is +# smaller than the base image, the base will not be +# truncated. If you want the base image size to match the +# size of the smaller top, you can safely truncate it +# yourself once the commit operation successfully completes. +# +# @speed: the maximum speed, in bytes per second # # @filter-node-name: the node name that should be assigned to the # filter driver that the commit job inserts into the graph @@ -2439,52 +2439,52 @@ # @iops_wr: write I/O operations per second # # @bps_max: total throughput limit during bursts, -# in bytes (Since 1.7) +# in bytes (Since 1.7) # # @bps_rd_max: read throughput limit during bursts, -# in bytes (Since 1.7) +# in bytes (Since 1.7) # # @bps_wr_max: write throughput limit during bursts, -# in bytes (Since 1.7) +# in bytes (Since 1.7) # # @iops_max: total I/O operations per second during bursts, -# in bytes (Since 1.7) +# in bytes (Since 1.7) # # @iops_rd_max: read I/O operations per second during bursts, -# in bytes (Since 1.7) +# in bytes (Since 1.7) # # @iops_wr_max: write I/O operations per second during bursts, -# in bytes (Since 1.7) +# in bytes (Since 1.7) # # @bps_max_length: maximum length of the @bps_max burst -# period, in seconds. It must only -# be set if @bps_max is set as well. -# Defaults to 1. (Since 2.6) +# period, in seconds. It must only +# be set if @bps_max is set as well. +# Defaults to 1. (Since 2.6) # # @bps_rd_max_length: maximum length of the @bps_rd_max -# burst period, in seconds. It must only -# be set if @bps_rd_max is set as well. -# Defaults to 1. (Since 2.6) +# burst period, in seconds. It must only +# be set if @bps_rd_max is set as well. +# Defaults to 1. (Since 2.6) # # @bps_wr_max_length: maximum length of the @bps_wr_max -# burst period, in seconds. It must only -# be set if @bps_wr_max is set as well. -# Defaults to 1. (Since 2.6) +# burst period, in seconds. It must only +# be set if @bps_wr_max is set as well. +# Defaults to 1. (Since 2.6) # # @iops_max_length: maximum length of the @iops burst -# period, in seconds. It must only -# be set if @iops_max is set as well. -# Defaults to 1. (Since 2.6) +# period, in seconds. It must only +# be set if @iops_max is set as well. +# Defaults to 1. (Since 2.6) # # @iops_rd_max_length: maximum length of the @iops_rd_max -# burst period, in seconds. It must only -# be set if @iops_rd_max is set as well. -# Defaults to 1. (Since 2.6) +# burst period, in seconds. It must only +# be set if @iops_rd_max is set as well. +# Defaults to 1. (Since 2.6) # # @iops_wr_max_length: maximum length of the @iops_wr_max -# burst period, in seconds. It must only -# be set if @iops_wr_max is set as well. -# Defaults to 1. (Since 2.6) +# burst period, in seconds. It must only +# be set if @iops_wr_max is set as well. +# Defaults to 1. (Since 2.6) # # @iops_size: an I/O size in bytes (Since 1.7) # @@ -2511,31 +2511,31 @@ # transaction. All fields are optional. When setting limits, if a field is # missing the current value is not changed. # -# @iops-total: limit total I/O operations per second -# @iops-total-max: I/O operations burst -# @iops-total-max-length: length of the iops-total-max burst period, in seconds -# It must only be set if @iops-total-max is set as well. -# @iops-read: limit read operations per second -# @iops-read-max: I/O operations read burst -# @iops-read-max-length: length of the iops-read-max burst period, in seconds -# It must only be set if @iops-read-max is set as well. -# @iops-write: limit write operations per second -# @iops-write-max: I/O operations write burst -# @iops-write-max-length: length of the iops-write-max burst period, in seconds -# It must only be set if @iops-write-max is set as well. -# @bps-total: limit total bytes per second -# @bps-total-max: total bytes burst -# @bps-total-max-length: length of the bps-total-max burst period, in seconds. -# It must only be set if @bps-total-max is set as well. -# @bps-read: limit read bytes per second -# @bps-read-max: total bytes read burst -# @bps-read-max-length: length of the bps-read-max burst period, in seconds -# It must only be set if @bps-read-max is set as well. -# @bps-write: limit write bytes per second -# @bps-write-max: total bytes write burst -# @bps-write-max-length: length of the bps-write-max burst period, in seconds -# It must only be set if @bps-write-max is set as well. -# @iops-size: when limiting by iops max size of an I/O in bytes +# @iops-total: limit total I/O operations per second +# @iops-total-max: I/O operations burst +# @iops-total-max-length: length of the iops-total-max burst period, in seconds +# It must only be set if @iops-total-max is set as well. +# @iops-read: limit read operations per second +# @iops-read-max: I/O operations read burst +# @iops-read-max-length: length of the iops-read-max burst period, in seconds +# It must only be set if @iops-read-max is set as well. +# @iops-write: limit write operations per second +# @iops-write-max: I/O operations write burst +# @iops-write-max-length: length of the iops-write-max burst period, in seconds +# It must only be set if @iops-write-max is set as well. +# @bps-total: limit total bytes per second +# @bps-total-max: total bytes burst +# @bps-total-max-length: length of the bps-total-max burst period, in seconds. +# It must only be set if @bps-total-max is set as well. +# @bps-read: limit read bytes per second +# @bps-read-max: total bytes read burst +# @bps-read-max-length: length of the bps-read-max burst period, in seconds +# It must only be set if @bps-read-max is set as well. +# @bps-write: limit write bytes per second +# @bps-write-max: total bytes write burst +# @bps-write-max-length: length of the bps-write-max burst period, in seconds +# It must only be set if @bps-write-max is set as well. +# @iops-size: when limiting by iops max size of an I/O in bytes # # Since: 2.11 ## @@ -2582,28 +2582,28 @@ # # @device: the device or node name of the top image # -# @base: the common backing file name. -# It cannot be set if @base-node is also set. +# @base: the common backing file name. +# It cannot be set if @base-node is also set. # # @base-node: the node name of the backing file. -# It cannot be set if @base is also set. (Since 2.8) +# It cannot be set if @base is also set. (Since 2.8) # # @backing-file: The backing file string to write into the top -# image. This filename is not validated. +# image. This filename is not validated. # -# If a pathname string is such that it cannot be -# resolved by QEMU, that means that subsequent QMP or -# HMP commands must use node-names for the image in -# question, as filename lookup methods will fail. +# If a pathname string is such that it cannot be +# resolved by QEMU, that means that subsequent QMP or +# HMP commands must use node-names for the image in +# question, as filename lookup methods will fail. # -# If not specified, QEMU will automatically determine -# the backing file string to use, or error out if there -# is no obvious choice. Care should be taken when -# specifying the string, to specify a valid filename or -# protocol. -# (Since 2.1) +# If not specified, QEMU will automatically determine +# the backing file string to use, or error out if there +# is no obvious choice. Care should be taken when +# specifying the string, to specify a valid filename or +# protocol. +# (Since 2.1) # -# @speed: the maximum speed, in bytes per second +# @speed: the maximum speed, in bytes per second # # @on-error: the action to take on an error (default report). # 'stop' and 'enospc' can only be used if the block device @@ -2653,8 +2653,8 @@ # the name of the parameter), but since QEMU 2.7 it can have # other values. # -# @speed: the maximum speed, in bytes per second, or 0 for unlimited. -# Defaults to 0. +# @speed: the maximum speed, in bytes per second, or 0 for unlimited. +# Defaults to 0. # # Returns: Nothing on success # If no background operation is active on this device, DeviceNotActive @@ -2820,8 +2820,8 @@ # # Determines how to handle discard requests. # -# @ignore: Ignore the request -# @unmap: Forward as an unmap request +# @ignore: Ignore the request +# @unmap: Forward as an unmap request # # Since: 2.9 ## @@ -2834,10 +2834,10 @@ # Describes the operation mode for the automatic conversion of plain # zero writes by the OS to driver specific optimized zero write commands. # -# @off: Disabled (default) -# @on: Enabled -# @unmap: Enabled and even try to unmap blocks if possible. This requires -# also that @BlockdevDiscardOptions is set to unmap for this device. +# @off: Disabled (default) +# @on: Enabled +# @unmap: Enabled and even try to unmap blocks if possible. This requires +# also that @BlockdevDiscardOptions is set to unmap for this device. # # Since: 2.1 ## @@ -2849,9 +2849,9 @@ # # Selects the AIO backend to handle I/O requests # -# @threads: Use qemu's thread pool -# @native: Use native AIO backend (only Linux and Windows) -# @io_uring: Use linux io_uring (since 5.0) +# @threads: Use qemu's thread pool +# @native: Use native AIO backend (only Linux and Windows) +# @io_uring: Use linux io_uring (since 5.0) # # Since: 2.9 ## @@ -2864,10 +2864,10 @@ # # Includes cache-related options for block devices # -# @direct: enables use of O_DIRECT (bypass the host page cache; -# default: false) -# @no-flush: ignore any flush requests for the device (default: -# false) +# @direct: enables use of O_DIRECT (bypass the host page cache; +# default: false) +# @no-flush: ignore any flush requests for the device (default: +# false) # # Since: 2.9 ## @@ -2905,18 +2905,18 @@ # # Driver specific block device options for the file backend. # -# @filename: path to the image file -# @pr-manager: the id for the object that will handle persistent reservations -# for this device (default: none, forward the commands via SG_IO; -# since 2.11) -# @aio: AIO backend (default: threads) (since: 2.8) -# @locking: whether to enable file locking. If set to 'auto', only enable -# when Open File Descriptor (OFD) locking API is available -# (default: auto, since 2.10) -# @drop-cache: invalidate page cache during live migration. This prevents -# stale data on the migration destination with cache.direct=off. -# Currently only supported on Linux hosts. -# (default: on, since: 4.0) +# @filename: path to the image file +# @pr-manager: the id for the object that will handle persistent reservations +# for this device (default: none, forward the commands via SG_IO; +# since 2.11) +# @aio: AIO backend (default: threads) (since: 2.8) +# @locking: whether to enable file locking. If set to 'auto', only enable +# when Open File Descriptor (OFD) locking API is available +# (default: auto, since 2.10) +# @drop-cache: invalidate page cache during live migration. This prevents +# stale data on the migration destination with cache.direct=off. +# Currently only supported on Linux hosts. +# (default: on, since: 4.0) # @x-check-cache-dropped: whether to check that page cache was dropped on live # migration. May cause noticeable delays if the image # file is large, do not use in production. @@ -2949,7 +2949,7 @@ # # Driver specific block device options for the null backend. # -# @size: size of the device in bytes. +# @size: size of the device in bytes. # @latency-ns: emulated latency (in nanoseconds) in processing # requests. Default to zero which completes requests immediately. # (Since 2.4) @@ -2966,8 +2966,8 @@ # # Driver specific block device options for the NVMe backend. # -# @device: PCI controller address of the NVMe device in -# format hhhh:bb:ss.f (host:bus:slot.function) +# @device: PCI controller address of the NVMe device in +# format hhhh:bb:ss.f (host:bus:slot.function) # @namespace: namespace number of the device, starting from 1. # # Note that the PCI @device must have been unbound from any host @@ -2983,15 +2983,15 @@ # # Driver specific block device options for the vvfat protocol. # -# @dir: directory to be exported as FAT image -# @fat-type: FAT type: 12, 16 or 32 -# @floppy: whether to export a floppy image (true) or -# partitioned hard disk (false; default) -# @label: set the volume label, limited to 11 bytes. FAT16 and -# FAT32 traditionally have some restrictions on labels, which are -# ignored by most operating systems. Defaults to "QEMU VVFAT". -# (since 2.4) -# @rw: whether to allow write operations (default: false) +# @dir: directory to be exported as FAT image +# @fat-type: FAT type: 12, 16 or 32 +# @floppy: whether to export a floppy image (true) or +# partitioned hard disk (false; default) +# @label: set the volume label, limited to 11 bytes. FAT16 and +# FAT32 traditionally have some restrictions on labels, which are +# ignored by most operating systems. Defaults to "QEMU VVFAT". +# (since 2.4) +# @rw: whether to allow write operations (default: false) # # Since: 2.9 ## @@ -3005,7 +3005,7 @@ # Driver specific block device options for image format that have no option # besides their data source. # -# @file: reference to or definition of the data source block device +# @file: reference to or definition of the data source block device # # Since: 2.9 ## @@ -3034,9 +3034,9 @@ # Driver specific block device options for image format that have no option # besides their data source and an optional backing file. # -# @backing: reference to or definition of the backing file block -# device, null disables the backing file entirely. -# Defaults to the backing file stored the image file. +# @backing: reference to or definition of the backing file block +# device, null disables the backing file entirely. +# Defaults to the backing file stored the image file. # # Since: 2.9 ## @@ -3049,15 +3049,15 @@ # # General overlap check modes. # -# @none: Do not perform any checks +# @none: Do not perform any checks # -# @constant: Perform only checks which can be done in constant time and -# without reading anything from disk +# @constant: Perform only checks which can be done in constant time and +# without reading anything from disk # -# @cached: Perform only checks which can be done without reading anything -# from disk +# @cached: Perform only checks which can be done without reading anything +# from disk # -# @all: Perform all available overlap checks +# @all: Perform all available overlap checks # # Since: 2.9 ## @@ -3096,10 +3096,10 @@ # Specifies which metadata structures should be guarded against unintended # overwriting. # -# @flags: set of flags for separate specification of each metadata structure -# type +# @flags: set of flags for separate specification of each metadata structure +# type # -# @mode: named mode which chooses a specific set of flags +# @mode: named mode which chooses a specific set of flags # # Since: 2.9 ## @@ -3132,9 +3132,9 @@ # # Driver specific block device options for qcow. # -# @encrypt: Image decryption options. Mandatory for -# encrypted images, except when doing a metadata-only -# probe of the image. +# @encrypt: Image decryption options. Mandatory for +# encrypted images, except when doing a metadata-only +# probe of the image. # # Since: 2.10 ## @@ -3169,51 +3169,51 @@ # # Driver specific block device options for qcow2. # -# @lazy-refcounts: whether to enable the lazy refcounts -# feature (default is taken from the image file) +# @lazy-refcounts: whether to enable the lazy refcounts +# feature (default is taken from the image file) # -# @pass-discard-request: whether discard requests to the qcow2 -# device should be forwarded to the data source +# @pass-discard-request: whether discard requests to the qcow2 +# device should be forwarded to the data source # # @pass-discard-snapshot: whether discard requests for the data source # should be issued when a snapshot operation (e.g. # deleting a snapshot) frees clusters in the qcow2 file # -# @pass-discard-other: whether discard requests for the data source -# should be issued on other occasions where a cluster -# gets freed +# @pass-discard-other: whether discard requests for the data source +# should be issued on other occasions where a cluster +# gets freed # -# @overlap-check: which overlap checks to perform for writes -# to the image, defaults to 'cached' (since 2.2) +# @overlap-check: which overlap checks to perform for writes +# to the image, defaults to 'cached' (since 2.2) # -# @cache-size: the maximum total size of the L2 table and -# refcount block caches in bytes (since 2.2) +# @cache-size: the maximum total size of the L2 table and +# refcount block caches in bytes (since 2.2) # -# @l2-cache-size: the maximum size of the L2 table cache in -# bytes (since 2.2) +# @l2-cache-size: the maximum size of the L2 table cache in +# bytes (since 2.2) # -# @l2-cache-entry-size: the size of each entry in the L2 cache in -# bytes. It must be a power of two between 512 -# and the cluster size. The default value is -# the cluster size (since 2.12) +# @l2-cache-entry-size: the size of each entry in the L2 cache in +# bytes. It must be a power of two between 512 +# and the cluster size. The default value is +# the cluster size (since 2.12) # -# @refcount-cache-size: the maximum size of the refcount block cache -# in bytes (since 2.2) +# @refcount-cache-size: the maximum size of the refcount block cache +# in bytes (since 2.2) # -# @cache-clean-interval: clean unused entries in the L2 and refcount -# caches. The interval is in seconds. The default value -# is 600 on supporting platforms, and 0 on other -# platforms. 0 disables this feature. (since 2.5) +# @cache-clean-interval: clean unused entries in the L2 and refcount +# caches. The interval is in seconds. The default value +# is 600 on supporting platforms, and 0 on other +# platforms. 0 disables this feature. (since 2.5) # -# @encrypt: Image decryption options. Mandatory for -# encrypted images, except when doing a metadata-only -# probe of the image. (since 2.10) +# @encrypt: Image decryption options. Mandatory for +# encrypted images, except when doing a metadata-only +# probe of the image. (since 2.10) # -# @data-file: reference to or definition of the external data file. -# This may only be specified for images that require an -# external data file. If it is not specified for such -# an image, the data file name is loaded from the image -# file. (since 4.0) +# @data-file: reference to or definition of the external data file. +# This may only be specified for images that require an +# external data file. If it is not specified for such +# an image, the data file name is loaded from the image +# file. (since 4.0) # # Since: 2.9 ## @@ -3304,8 +3304,8 @@ # # Trigger events supported by blkdebug. # -# @l1_shrink_write_table: write zeros to the l1 table to shrink image. -# (since 2.11) +# @l1_shrink_write_table: write zeros to the l1 table to shrink image. +# (since 2.11) # # @l1_shrink_free_l2_clusters: discard the l2 tables. (since 2.11) # @@ -3363,25 +3363,25 @@ # # Describes a single error injection for blkdebug. # -# @event: trigger event +# @event: trigger event # -# @state: the state identifier blkdebug needs to be in to -# actually trigger the event; defaults to "any" +# @state: the state identifier blkdebug needs to be in to +# actually trigger the event; defaults to "any" # -# @iotype: the type of I/O operations on which this error should -# be injected; defaults to "all read, write, -# write-zeroes, discard, and flush operations" -# (since: 4.1) +# @iotype: the type of I/O operations on which this error should +# be injected; defaults to "all read, write, +# write-zeroes, discard, and flush operations" +# (since: 4.1) # -# @errno: error identifier (errno) to be returned; defaults to -# EIO +# @errno: error identifier (errno) to be returned; defaults to +# EIO # -# @sector: specifies the sector index which has to be affected -# in order to actually trigger the event; defaults to "any -# sector" +# @sector: specifies the sector index which has to be affected +# in order to actually trigger the event; defaults to "any +# sector" # -# @once: disables further events after this one has been -# triggered; defaults to false +# @once: disables further events after this one has been +# triggered; defaults to false # # @immediately: fail immediately; defaults to false # @@ -3401,13 +3401,13 @@ # # Describes a single state-change event for blkdebug. # -# @event: trigger event +# @event: trigger event # -# @state: the current state identifier blkdebug needs to be in; -# defaults to "any" +# @state: the current state identifier blkdebug needs to be in; +# defaults to "any" # -# @new_state: the state identifier blkdebug is supposed to assume if -# this event is triggered +# @new_state: the state identifier blkdebug is supposed to assume if +# this event is triggered # # Since: 2.9 ## @@ -3421,41 +3421,41 @@ # # Driver specific block device options for blkdebug. # -# @image: underlying raw block device (or image file) +# @image: underlying raw block device (or image file) # -# @config: filename of the configuration file +# @config: filename of the configuration file # -# @align: required alignment for requests in bytes, must be -# positive power of 2, or 0 for default +# @align: required alignment for requests in bytes, must be +# positive power of 2, or 0 for default # -# @max-transfer: maximum size for I/O transfers in bytes, must be -# positive multiple of @align and of the underlying -# file's request alignment (but need not be a power of -# 2), or 0 for default (since 2.10) +# @max-transfer: maximum size for I/O transfers in bytes, must be +# positive multiple of @align and of the underlying +# file's request alignment (but need not be a power of +# 2), or 0 for default (since 2.10) # -# @opt-write-zero: preferred alignment for write zero requests in bytes, -# must be positive multiple of @align and of the -# underlying file's request alignment (but need not be a -# power of 2), or 0 for default (since 2.10) +# @opt-write-zero: preferred alignment for write zero requests in bytes, +# must be positive multiple of @align and of the +# underlying file's request alignment (but need not be a +# power of 2), or 0 for default (since 2.10) # -# @max-write-zero: maximum size for write zero requests in bytes, must be -# positive multiple of @align, of @opt-write-zero, and of -# the underlying file's request alignment (but need not -# be a power of 2), or 0 for default (since 2.10) +# @max-write-zero: maximum size for write zero requests in bytes, must be +# positive multiple of @align, of @opt-write-zero, and of +# the underlying file's request alignment (but need not +# be a power of 2), or 0 for default (since 2.10) # -# @opt-discard: preferred alignment for discard requests in bytes, must -# be positive multiple of @align and of the underlying -# file's request alignment (but need not be a power of -# 2), or 0 for default (since 2.10) +# @opt-discard: preferred alignment for discard requests in bytes, must +# be positive multiple of @align and of the underlying +# file's request alignment (but need not be a power of +# 2), or 0 for default (since 2.10) # -# @max-discard: maximum size for discard requests in bytes, must be -# positive multiple of @align, of @opt-discard, and of -# the underlying file's request alignment (but need not -# be a power of 2), or 0 for default (since 2.10) +# @max-discard: maximum size for discard requests in bytes, must be +# positive multiple of @align, of @opt-discard, and of +# the underlying file's request alignment (but need not +# be a power of 2), or 0 for default (since 2.10) # -# @inject-error: array of error injection descriptions +# @inject-error: array of error injection descriptions # -# @set-state: array of state-change descriptions +# @set-state: array of state-change descriptions # # @take-child-perms: Permissions to take on @image in addition to what # is necessary anyway (which depends on how the @@ -3485,14 +3485,14 @@ # # Driver specific block device options for blklogwrites. # -# @file: block device +# @file: block device # -# @log: block device used to log writes to @file +# @log: block device used to log writes to @file # # @log-sector-size: sector size used in logging writes to @file, determines # granularity of offsets and sizes of writes (default: 512) # -# @log-append: append to an existing log (default: false) +# @log-append: append to an existing log (default: false) # # @log-super-update-interval: interval of write requests after which the log # super block is updated to disk (default: 4096) @@ -3511,9 +3511,9 @@ # # Driver specific block device options for blkverify. # -# @test: block device to be tested +# @test: block device to be tested # -# @raw: raw image used for verification +# @raw: raw image used for verification # # Since: 2.9 ## @@ -3526,7 +3526,7 @@ # # Driver specific block device options for blkreplay. # -# @image: disk image which should be controlled with blkreplay +# @image: disk image which should be controlled with blkreplay # # Since: 4.2 ## @@ -3551,10 +3551,10 @@ # # Driver specific block device options for Quorum # -# @blkverify: true if the driver must print content mismatch +# @blkverify: true if the driver must print content mismatch # set to false by default # -# @children: the children block devices to use +# @children: the children block devices to use # # @vote-threshold: the vote limit under which a read will fail # @@ -3578,16 +3578,16 @@ # # Driver specific block device options for Gluster # -# @volume: name of gluster volume where VM image resides +# @volume: name of gluster volume where VM image resides # -# @path: absolute path to image file in gluster volume +# @path: absolute path to image file in gluster volume # -# @server: gluster servers description +# @server: gluster servers description # -# @debug: libgfapi log level (default '4' which is Error) -# (Since 2.8) +# @debug: libgfapi log level (default '4' which is Error) +# (Since 2.8) # -# @logfile: libgfapi log file (default /dev/stderr) (Since 2.8) +# @logfile: libgfapi log file (default /dev/stderr) (Since 2.8) # # Since: 2.9 ## @@ -3622,30 +3622,30 @@ ## # @BlockdevOptionsIscsi: # -# @transport: The iscsi transport type +# @transport: The iscsi transport type # -# @portal: The address of the iscsi portal +# @portal: The address of the iscsi portal # -# @target: The target iqn name +# @target: The target iqn name # -# @lun: LUN to connect to. Defaults to 0. +# @lun: LUN to connect to. Defaults to 0. # -# @user: User name to log in with. If omitted, no CHAP -# authentication is performed. +# @user: User name to log in with. If omitted, no CHAP +# authentication is performed. # # @password-secret: The ID of a QCryptoSecret object providing # the password for the login. This option is required if # @user is specified. # -# @initiator-name: The iqn name we want to identify to the target -# as. If this option is not specified, an initiator name is -# generated automatically. +# @initiator-name: The iqn name we want to identify to the target +# as. If this option is not specified, an initiator name is +# generated automatically. # -# @header-digest: The desired header digest. Defaults to -# none-crc32c. +# @header-digest: The desired header digest. Defaults to +# none-crc32c. # -# @timeout: Timeout in seconds after which a request will -# timeout. 0 means no timeout and is the default. +# @timeout: Timeout in seconds after which a request will +# timeout. 0 means no timeout and is the default. # # Driver specific block device options for iscsi # @@ -3674,29 +3674,29 @@ ## # @BlockdevOptionsRbd: # -# @pool: Ceph pool name. +# @pool: Ceph pool name. # -# @image: Image name in the Ceph pool. +# @image: Image name in the Ceph pool. # -# @conf: path to Ceph configuration file. Values -# in the configuration file will be overridden by -# options specified via QAPI. +# @conf: path to Ceph configuration file. Values +# in the configuration file will be overridden by +# options specified via QAPI. # -# @snapshot: Ceph snapshot name. +# @snapshot: Ceph snapshot name. # -# @user: Ceph id name. +# @user: Ceph id name. # # @auth-client-required: Acceptable authentication modes. -# This maps to Ceph configuration option -# "auth_client_required". (Since 3.0) +# This maps to Ceph configuration option +# "auth_client_required". (Since 3.0) # -# @key-secret: ID of a QCryptoSecret object providing a key -# for cephx authentication. -# This maps to Ceph configuration option -# "key". (Since 3.0) +# @key-secret: ID of a QCryptoSecret object providing a key +# for cephx authentication. +# This maps to Ceph configuration option +# "key". (Since 3.0) # -# @server: Monitor host address and port. This maps -# to the "mon_host" Ceph option. +# @server: Monitor host address and port. This maps +# to the "mon_host" Ceph option. # # Since: 2.9 ## @@ -3715,10 +3715,10 @@ # # Driver specific block device options for sheepdog # -# @vdi: Virtual disk image name -# @server: The Sheepdog server to connect to -# @snap-id: Snapshot ID -# @tag: Snapshot tag name +# @vdi: Virtual disk image name +# @server: The Sheepdog server to connect to +# @snap-id: Snapshot ID +# @tag: Snapshot tag name # # Only one of @snap-id and @tag may be present. # @@ -3768,7 +3768,7 @@ # # An enumeration of NFS transport types # -# @inet: TCP transport +# @inet: TCP transport # # Since: 2.9 ## @@ -3780,9 +3780,9 @@ # # Captures the address of the socket # -# @type: transport type used for NFS (only TCP supported) +# @type: transport type used for NFS (only TCP supported) # -# @host: host address for NFS server +# @host: host address for NFS server # # Since: 2.9 ## @@ -3795,29 +3795,29 @@ # # Driver specific block device option for NFS # -# @server: host address +# @server: host address # -# @path: path of the image on the host +# @path: path of the image on the host # -# @user: UID value to use when talking to the -# server (defaults to 65534 on Windows and getuid() -# on unix) +# @user: UID value to use when talking to the +# server (defaults to 65534 on Windows and getuid() +# on unix) # -# @group: GID value to use when talking to the -# server (defaults to 65534 on Windows and getgid() -# in unix) +# @group: GID value to use when talking to the +# server (defaults to 65534 on Windows and getgid() +# in unix) # -# @tcp-syn-count: number of SYNs during the session -# establishment (defaults to libnfs default) +# @tcp-syn-count: number of SYNs during the session +# establishment (defaults to libnfs default) # -# @readahead-size: set the readahead size in bytes (defaults -# to libnfs default) +# @readahead-size: set the readahead size in bytes (defaults +# to libnfs default) # -# @page-cache-size: set the pagecache size in bytes (defaults -# to libnfs default) +# @page-cache-size: set the pagecache size in bytes (defaults +# to libnfs default) # -# @debug: set the NFS debug level (max 2) (defaults -# to libnfs default) +# @debug: set the NFS debug level (max 2) (defaults +# to libnfs default) # # Since: 2.9 ## @@ -3837,22 +3837,22 @@ # Driver specific block device options shared by all protocols supported by the # curl backend. # -# @url: URL of the image file +# @url: URL of the image file # -# @readahead: Size of the read-ahead cache; must be a multiple of -# 512 (defaults to 256 kB) +# @readahead: Size of the read-ahead cache; must be a multiple of +# 512 (defaults to 256 kB) # -# @timeout: Timeout for connections, in seconds (defaults to 5) +# @timeout: Timeout for connections, in seconds (defaults to 5) # -# @username: Username for authentication (defaults to none) +# @username: Username for authentication (defaults to none) # -# @password-secret: ID of a QCryptoSecret object providing a password -# for authentication (defaults to no password) +# @password-secret: ID of a QCryptoSecret object providing a password +# for authentication (defaults to no password) # -# @proxy-username: Username for proxy authentication (defaults to none) +# @proxy-username: Username for proxy authentication (defaults to none) # -# @proxy-password-secret: ID of a QCryptoSecret object providing a password -# for proxy authentication (defaults to no password) +# @proxy-password-secret: ID of a QCryptoSecret object providing a password +# for proxy authentication (defaults to no password) # # Since: 2.9 ## @@ -3871,9 +3871,9 @@ # Driver specific block device options for HTTP connections over the curl # backend. URLs must start with "http://". # -# @cookie: List of cookies to set; format is -# "name1=content1; name2=content2;" as explained by -# CURLOPT_COOKIE(3). Defaults to no cookies. +# @cookie: List of cookies to set; format is +# "name1=content1; name2=content2;" as explained by +# CURLOPT_COOKIE(3). Defaults to no cookies. # # @cookie-secret: ID of a QCryptoSecret object providing the cookie data in a # secure way. See @cookie for the format. (since 2.10) @@ -3891,12 +3891,12 @@ # Driver specific block device options for HTTPS connections over the curl # backend. URLs must start with "https://". # -# @cookie: List of cookies to set; format is -# "name1=content1; name2=content2;" as explained by -# CURLOPT_COOKIE(3). Defaults to no cookies. +# @cookie: List of cookies to set; format is +# "name1=content1; name2=content2;" as explained by +# CURLOPT_COOKIE(3). Defaults to no cookies. # -# @sslverify: Whether to verify the SSL certificate's validity (defaults to -# true) +# @sslverify: Whether to verify the SSL certificate's validity (defaults to +# true) # # @cookie-secret: ID of a QCryptoSecret object providing the cookie data in a # secure way. See @cookie for the format. (since 2.10) @@ -3927,8 +3927,8 @@ # Driver specific block device options for FTPS connections over the curl # backend. URLs must start with "ftps://". # -# @sslverify: Whether to verify the SSL certificate's validity (defaults to -# true) +# @sslverify: Whether to verify the SSL certificate's validity (defaults to +# true) # # Since: 2.9 ## @@ -3941,11 +3941,11 @@ # # Driver specific block device options for NBD. # -# @server: NBD server address +# @server: NBD server address # -# @export: export name +# @export: export name # -# @tls-creds: TLS credentials ID +# @tls-creds: TLS credentials ID # # @x-dirty-bitmap: A "qemu:dirty-bitmap:NAME" string to query in place of # traditional "base:allocation" block status (see @@ -3973,8 +3973,8 @@ # # Driver specific block device options for the raw driver. # -# @offset: position where the block device starts -# @size: the assumed size of the device +# @offset: position where the block device starts +# @size: the assumed size of the device # # Since: 2.9 ## @@ -3987,9 +3987,9 @@ # # Driver specific block device options for VxHS # -# @vdisk-id: UUID of VxHS volume -# @server: vxhs server IP, port -# @tls-creds: TLS credentials ID +# @vdisk-id: UUID of VxHS volume +# @server: vxhs server IP, port +# @tls-creds: TLS credentials ID # # Since: 2.10 ## @@ -4003,9 +4003,9 @@ # # Driver specific block device options for the throttle driver # -# @throttle-group: the name of the throttle-group object to use. It -# must already exist. -# @file: reference to or definition of the data source block device +# @throttle-group: the name of the throttle-group object to use. It +# must already exist. +# @file: reference to or definition of the data source block device # Since: 2.11 ## { 'struct': 'BlockdevOptionsThrottle', @@ -4018,19 +4018,19 @@ # Options for creating a block device. Many options are available for all # block devices, independent of the block driver: # -# @driver: block driver name -# @node-name: the node name of the new node (Since 2.0). -# This option is required on the top level of blockdev-add. -# Valid node names start with an alphabetic character and may -# contain only alphanumeric characters, '-', '.' and '_'. Their -# maximum length is 31 characters. -# @discard: discard-related options (default: ignore) -# @cache: cache-related options -# @read-only: whether the block device should be read-only (default: false). -# Note that some block drivers support only read-only access, -# either generally or in certain configurations. In this case, -# the default value does not work and the option must be -# specified explicitly. +# @driver: block driver name +# @node-name: the node name of the new node (Since 2.0). +# This option is required on the top level of blockdev-add. +# Valid node names start with an alphabetic character and may +# contain only alphanumeric characters, '-', '.' and '_'. Their +# maximum length is 31 characters. +# @discard: discard-related options (default: ignore) +# @cache: cache-related options +# @read-only: whether the block device should be read-only (default: false). +# Note that some block drivers support only read-only access, +# either generally or in certain configurations. In this case, +# the default value does not work and the option must be +# specified explicitly. # @auto-read-only: if true and @read-only is false, QEMU may automatically # decide not to open the image read-write as requested, but # fall back to read-only instead (and switch between the modes @@ -4039,8 +4039,8 @@ # (default: false, since 3.1) # @detect-zeroes: detect and optimize zero writes (Since 2.1) # (default: off) -# @force-share: force share all permission on added nodes. -# Requires read-only=true. (Since 2.10) +# @force-share: force share all permission on added nodes. +# Requires read-only=true. (Since 2.10) # # Remaining options are determined by the block driver. # @@ -4106,8 +4106,8 @@ # # Reference to a block device. # -# @definition: defines a new block device inline -# @reference: references the ID of an existing block device +# @definition: defines a new block device inline +# @reference: references the ID of an existing block device # # Since: 2.9 ## @@ -4120,11 +4120,11 @@ # # Reference to a block device. # -# @definition: defines a new block device inline -# @reference: references the ID of an existing block device. -# An empty string means that no block device should -# be referenced. Deprecated; use null instead. -# @null: No block device should be referenced (since 2.10) +# @definition: defines a new block device inline +# @reference: references the ID of an existing block device. +# An empty string means that no block device should +# be referenced. Deprecated; use null instead. +# @null: No block device should be referenced (since 2.10) # # Since: 2.9 ## @@ -4765,12 +4765,12 @@ # # @device: Block device name (deprecated, use @id instead) # -# @id: The name or QOM path of the guest device (since: 2.8) +# @id: The name or QOM path of the guest device (since: 2.8) # -# @force: if false (the default), an eject request will be sent to -# the guest if it has locked the tray (and the tray will not be opened -# immediately); if true, the tray will be opened regardless of whether -# it is locked +# @force: if false (the default), an eject request will be sent to +# the guest if it has locked the tray (and the tray will not be opened +# immediately); if true, the tray will be opened regardless of whether +# it is locked # # Since: 2.5 # @@ -4803,9 +4803,9 @@ # # If the tray was already closed before, this will be a no-op. # -# @device: Block device name (deprecated, use @id instead) +# @device: Block device name (deprecated, use @id instead) # -# @id: The name or QOM path of the guest device (since: 2.8) +# @id: The name or QOM path of the guest device (since: 2.8) # # Since: 2.5 # @@ -4837,7 +4837,7 @@ # # If the tray is open and there is no medium inserted, this will be a no-op. # -# @id: The name or QOM path of the guest device +# @id: The name or QOM path of the guest device # # Since: 2.12 # @@ -4877,7 +4877,7 @@ # device's tray must currently be open (unless there is no attached guest # device) and there must be no medium inserted already. # -# @id: The name or QOM path of the guest device +# @id: The name or QOM path of the guest device # # @node-name: name of a node in the block driver state graph # @@ -4911,11 +4911,11 @@ # Specifies the new read-only mode of a block device subject to the # @blockdev-change-medium command. # -# @retain: Retains the current read-only mode +# @retain: Retains the current read-only mode # -# @read-only: Makes the device read-only +# @read-only: Makes the device read-only # -# @read-write: Makes the device writable +# @read-write: Makes the device writable # # Since: 2.3 # @@ -4932,18 +4932,18 @@ # combines blockdev-open-tray, blockdev-remove-medium, blockdev-insert-medium # and blockdev-close-tray). # -# @device: Block device name (deprecated, use @id instead) +# @device: Block device name (deprecated, use @id instead) # -# @id: The name or QOM path of the guest device -# (since: 2.8) +# @id: The name or QOM path of the guest device +# (since: 2.8) # -# @filename: filename of the new image to be loaded +# @filename: filename of the new image to be loaded # -# @format: format to open the new image with (defaults to -# the probed format) +# @format: format to open the new image with (defaults to +# the probed format) # -# @read-only-mode: change the read-only mode of the device; defaults -# to 'retain' +# @read-only-mode: change the read-only mode of the device; defaults +# to 'retain' # # Since: 2.5 # @@ -5028,8 +5028,8 @@ # the access size # # @fatal: if set, the image is marked corrupt and therefore unusable after this -# event and must be repaired (Since 2.2; before, every -# BLOCK_IMAGE_CORRUPTED event was fatal) +# event and must be repaired (Since 2.2; before, every +# BLOCK_IMAGE_CORRUPTED event was fatal) # # Note: If action is "stop", a STOP event will eventually follow the # BLOCK_IO_ERROR event. @@ -5077,10 +5077,10 @@ # # @reason: human readable string describing the error cause. # (This field is a debugging aid for humans, it should not -# be parsed by applications) (since: 2.2) +# be parsed by applications) (since: 2.2) # # Note: If action is "stop", a STOP event will eventually follow the -# BLOCK_IO_ERROR event +# BLOCK_IO_ERROR event # # Since: 0.13.0 # @@ -5222,7 +5222,7 @@ # @speed: rate limit, bytes per second # # Note: The "ready to complete" status is always reset by a @BLOCK_JOB_ERROR -# event +# event # # Since: 1.3 # @@ -5356,15 +5356,15 @@ # @node: the name of the node that will be added. # # Note: this command is experimental, and its API is not stable. It -# does not support all kinds of operations, all kinds of children, nor -# all block drivers. +# does not support all kinds of operations, all kinds of children, nor +# all block drivers. # -# FIXME Removing children from a quorum node means introducing gaps in the -# child indices. This cannot be represented in the 'children' list of -# BlockdevOptionsQuorum, as returned by .bdrv_refresh_filename(). +# FIXME Removing children from a quorum node means introducing gaps in the +# child indices. This cannot be represented in the 'children' list of +# BlockdevOptionsQuorum, as returned by .bdrv_refresh_filename(). # -# Warning: The data in a new quorum child MUST be consistent with that of -# the rest of the array. +# Warning: The data in a new quorum child MUST be consistent with that of +# the rest of the array. # # Since: 2.7 # @@ -5411,7 +5411,7 @@ # is already attached # # Note: this command is experimental and intended for test cases that need -# control over IOThreads only. +# control over IOThreads only. # # Since: 2.12 # diff --git a/qapi/block.json b/qapi/block.json index 7898104dae..65eaacf31a 100644 --- a/qapi/block.json +++ b/qapi/block.json @@ -190,12 +190,12 @@ # # Ejects a device from a removable drive. # -# @device: Block device name (deprecated, use @id instead) +# @device: Block device name (deprecated, use @id instead) # -# @id: The name or QOM path of the guest device (since: 2.8) +# @id: The name or QOM path of the guest device (since: 2.8) # -# @force: If true, eject regardless of whether the drive is locked. -# If not specified, the default value is false. +# @force: If true, eject regardless of whether the drive is locked. +# If not specified, the default value is false. # # Returns: Nothing on success # @@ -254,7 +254,7 @@ # (Since 5.0) # # @writable: Whether clients should be able to write to the device via the -# NBD connection (default false). +# NBD connection (default false). # # @bitmap: Also export the dirty bitmap reachable from @device, so the # NBD client can use NBD_OPT_SET_META_CONTEXT with @@ -281,10 +281,10 @@ # Potential additional modes to be added in the future: # # hide: Just hide export from new clients, leave existing connections as is. -# Remove export after all clients are disconnected. +# Remove export after all clients are disconnected. # # soft: Hide export from new clients, answer with ESHUTDOWN for all further -# requests from existing clients. +# requests from existing clients. # # Since: 2.12 ## diff --git a/qapi/char.json b/qapi/char.json index a6e81ac7bc..8a9f1e7509 100644 --- a/qapi/char.json +++ b/qapi/char.json @@ -262,11 +262,11 @@ # @tn3270: enable tn3270 protocol on server # sockets (default: false) (Since: 2.10) # @websocket: enable websocket protocol on server -# sockets (default: false) (Since: 3.1) +# sockets (default: false) (Since: 3.1) # @reconnect: For a client socket, if a socket is disconnected, -# then attempt a reconnect after the given number of seconds. -# Setting this to zero disables this function. (default: 0) -# (Since: 2.2) +# then attempt a reconnect after the given number of seconds. +# Setting this to zero disables this function. (default: 0) +# (Since: 2.2) # # Since: 1.4 ## diff --git a/qapi/dump.json b/qapi/dump.json index 2b35409a7b..a1eed7b15c 100644 --- a/qapi/dump.json +++ b/qapi/dump.json @@ -38,8 +38,8 @@ # using gdb to process the core file. # # IMPORTANT: this option can make QEMU allocate several gigabytes -# of RAM. This can happen for a large guest, or a -# malicious guest pretending to be large. +# of RAM. This can happen for a large guest, or a +# malicious guest pretending to be large. # # Also, paging=true has the following limitations: # diff --git a/qapi/introspect.json b/qapi/introspect.json index 031a954fa9..8756e7920e 100644 --- a/qapi/introspect.json +++ b/qapi/introspect.json @@ -34,15 +34,15 @@ # alternate that includes the original type alongside something else. # # Returns: array of @SchemaInfo, where each element describes an -# entity in the ABI: command, event, type, ... +# entity in the ABI: command, event, type, ... # -# The order of the various SchemaInfo is unspecified; however, all -# names are guaranteed to be unique (no name will be duplicated with -# different meta-types). +# The order of the various SchemaInfo is unspecified; however, all +# names are guaranteed to be unique (no name will be duplicated with +# different meta-types). # # Note: the QAPI schema is also used to help define *internal* -# interfaces, by defining QAPI types. These are not part of the QMP -# wire ABI, and therefore not returned by this command. +# interfaces, by defining QAPI types. These are not part of the QMP +# wire ABI, and therefore not returned by this command. # # Since: 2.5 ## diff --git a/qapi/job.json b/qapi/job.json index a121b615fb..5e658281f5 100644 --- a/qapi/job.json +++ b/qapi/job.json @@ -214,28 +214,28 @@ # # Information about a job. # -# @id: The job identifier +# @id: The job identifier # -# @type: The kind of job that is being performed +# @type: The kind of job that is being performed # -# @status: Current job state/status +# @status: Current job state/status # -# @current-progress: Progress made until now. The unit is arbitrary and the -# value can only meaningfully be used for the ratio of -# @current-progress to @total-progress. The value is -# monotonically increasing. +# @current-progress: Progress made until now. The unit is arbitrary and the +# value can only meaningfully be used for the ratio of +# @current-progress to @total-progress. The value is +# monotonically increasing. # -# @total-progress: Estimated @current-progress value at the completion of -# the job. This value can arbitrarily change while the -# job is running, in both directions. +# @total-progress: Estimated @current-progress value at the completion of +# the job. This value can arbitrarily change while the +# job is running, in both directions. # -# @error: If this field is present, the job failed; if it is -# still missing in the CONCLUDED state, this indicates -# successful completion. +# @error: If this field is present, the job failed; if it is +# still missing in the CONCLUDED state, this indicates +# successful completion. # -# The value is a human-readable error message to describe -# the reason for the job failure. It should not be parsed -# by applications. +# The value is a human-readable error message to describe +# the reason for the job failure. It should not be parsed +# by applications. # # Since: 3.0 ## diff --git a/qapi/machine-target.json b/qapi/machine-target.json index 0462322472..f2c82949d8 100644 --- a/qapi/machine-target.json +++ b/qapi/machine-target.json @@ -40,13 +40,13 @@ # model details. # # Note: When a non-migration-safe CPU model is expanded in static mode, some -# features enabled by the CPU model may be omitted, because they can't be -# implemented by a static CPU model definition (e.g. cache info passthrough and -# PMU passthrough in x86). If you need an accurate representation of the -# features enabled by a non-migration-safe CPU model, use @full. If you need a -# static representation that will keep ABI compatibility even when changing QEMU -# version or machine-type, use @static (but keep in mind that some features may -# be omitted). +# features enabled by the CPU model may be omitted, because they can't be +# implemented by a static CPU model definition (e.g. cache info passthrough and +# PMU passthrough in x86). If you need an accurate representation of the +# features enabled by a non-migration-safe CPU model, use @full. If you need a +# static representation that will keep ABI compatibility even when changing QEMU +# version or machine-type, use @static (but keep in mind that some features may +# be omitted). # # Since: 2.8.0 ## @@ -148,7 +148,7 @@ # with wrong types. # # Note: this command isn't specific to s390x, but is only implemented -# on this architecture currently. +# on this architecture currently. # # Since: 2.8.0 ## @@ -191,7 +191,7 @@ # with wrong types. # # Note: this command isn't specific to s390x, but is only implemented -# on this architecture currently. +# on this architecture currently. # # Since: 2.8.0 ## diff --git a/qapi/machine.json b/qapi/machine.json index b3d30bc816..704b2b0fe3 100644 --- a/qapi/machine.json +++ b/qapi/machine.json @@ -680,7 +680,7 @@ # 5.2.27.5: Table 5-147: Field "Cache Attributes" of ACPI 6.3 spec. # # @none: None (no memory side cache in this proximity domain, -# or cache write policy unknown) +# or cache write policy unknown) # # @write-back: Write Back (WB) # @@ -706,7 +706,7 @@ # @level: the cache level described in this structure. # # @associativity: the cache associativity, -# none/direct-mapped/complex(complex cache indexing). +# none/direct-mapped/complex(complex cache indexing). # # @policy: the write policy, none/write-back/write-through. # @@ -823,10 +823,10 @@ # @core-id: core number within die the CPU belongs to# @thread-id: thread number within core the CPU belongs to # # Note: currently there are 5 properties that could be present -# but management should be prepared to pass through other -# properties with device_add command to allow for future -# interface extension. This also requires the filed names to be kept in -# sync with the properties passed to -device/device_add. +# but management should be prepared to pass through other +# properties with device_add command to allow for future +# interface extension. This also requires the filed names to be kept in +# sync with the properties passed to -device/device_add. # # Since: 2.7 ## diff --git a/qapi/migration.json b/qapi/migration.json index b7348d0c8b..aa160e9e42 100644 --- a/qapi/migration.json +++ b/qapi/migration.json @@ -28,22 +28,22 @@ # @normal-bytes: number of normal bytes sent (since 1.2) # # @dirty-pages-rate: number of pages dirtied by second by the -# guest (since 1.3) +# guest (since 1.3) # # @mbps: throughput in megabits/sec. (since 1.6) # # @dirty-sync-count: number of times that dirty ram was synchronized (since 2.1) # # @postcopy-requests: The number of page requests received from the destination -# (since 2.7) +# (since 2.7) # # @page-size: The number of bytes per page for the various page-based -# statistics (since 2.10) +# statistics (since 2.10) # # @multifd-bytes: The number of bytes sent through multifd (since 3.0) # # @pages-per-second: the number of memory pages transferred per second -# (Since 4.0) +# (Since 4.0) # # Since: 0.14.0 ## @@ -131,7 +131,7 @@ # @pre-switchover: Paused before device serialisation. (since 2.11) # # @device: During device serialisation when pause-before-switchover is enabled -# (since 2.11) +# (since 2.11) # # @wait-unplug: wait for device unplug request by guest OS to be completed. # (since 4.2) @@ -167,41 +167,41 @@ # status is 'active' or 'completed' (since 1.2) # # @total-time: total amount of milliseconds since migration started. -# If migration has ended, it returns the total migration -# time. (since 1.2) +# If migration has ended, it returns the total migration +# time. (since 1.2) # # @downtime: only present when migration finishes correctly -# total downtime in milliseconds for the guest. -# (since 1.3) +# total downtime in milliseconds for the guest. +# (since 1.3) # # @expected-downtime: only present while migration is active -# expected downtime in milliseconds for the guest in last walk -# of the dirty bitmap. (since 1.3) +# expected downtime in milliseconds for the guest in last walk +# of the dirty bitmap. (since 1.3) # # @setup-time: amount of setup time in milliseconds _before_ the -# iterations begin but _after_ the QMP command is issued. This is designed -# to provide an accounting of any activities (such as RDMA pinning) which -# may be expensive, but do not actually occur during the iterative -# migration rounds themselves. (since 1.6) +# iterations begin but _after_ the QMP command is issued. This is designed +# to provide an accounting of any activities (such as RDMA pinning) which +# may be expensive, but do not actually occur during the iterative +# migration rounds themselves. (since 1.6) # # @cpu-throttle-percentage: percentage of time guest cpus are being -# throttled during auto-converge. This is only present when auto-converge -# has started throttling guest cpus. (Since 2.7) +# throttled during auto-converge. This is only present when auto-converge +# has started throttling guest cpus. (Since 2.7) # # @error-desc: the human readable error description string, when # @status is 'failed'. Clients should not attempt to parse the # error strings. (Since 2.7) # # @postcopy-blocktime: total time when all vCPU were blocked during postcopy -# live migration. This is only present when the postcopy-blocktime -# migration capability is enabled. (Since 3.0) +# live migration. This is only present when the postcopy-blocktime +# migration capability is enabled. (Since 3.0) # # @postcopy-vcpu-blocktime: list of the postcopy blocktime per vCPU. This is -# only present when the postcopy-blocktime migration capability -# is enabled. (Since 3.0) +# only present when the postcopy-blocktime migration capability +# is enabled. (Since 3.0) # # @compression: migration compression statistics, only returned if compression -# feature is on and status is 'active' or 'completed' (Since 3.1) +# feature is on and status is 'active' or 'completed' (Since 3.1) # # @socket-address: Only used for tcp, to know what the real port is (Since 4.0) # @@ -355,54 +355,54 @@ # loads, by sending compressed difference of the pages # # @rdma-pin-all: Controls whether or not the entire VM memory footprint is -# mlock()'d on demand or all at once. Refer to docs/rdma.txt for usage. -# Disabled by default. (since 2.0) +# mlock()'d on demand or all at once. Refer to docs/rdma.txt for usage. +# Disabled by default. (since 2.0) # # @zero-blocks: During storage migration encode blocks of zeroes efficiently. This -# essentially saves 1MB of zeroes per block on the wire. Enabling requires -# source and target VM to support this feature. To enable it is sufficient -# to enable the capability on the source VM. The feature is disabled by -# default. (since 1.6) +# essentially saves 1MB of zeroes per block on the wire. Enabling requires +# source and target VM to support this feature. To enable it is sufficient +# to enable the capability on the source VM. The feature is disabled by +# default. (since 1.6) # # @compress: Use multiple compression threads to accelerate live migration. -# This feature can help to reduce the migration traffic, by sending -# compressed pages. Please note that if compress and xbzrle are both -# on, compress only takes effect in the ram bulk stage, after that, -# it will be disabled and only xbzrle takes effect, this can help to -# minimize migration traffic. The feature is disabled by default. -# (since 2.4 ) +# This feature can help to reduce the migration traffic, by sending +# compressed pages. Please note that if compress and xbzrle are both +# on, compress only takes effect in the ram bulk stage, after that, +# it will be disabled and only xbzrle takes effect, this can help to +# minimize migration traffic. The feature is disabled by default. +# (since 2.4 ) # # @events: generate events for each migration state change # (since 2.4 ) # # @auto-converge: If enabled, QEMU will automatically throttle down the guest -# to speed up convergence of RAM migration. (since 1.6) +# to speed up convergence of RAM migration. (since 1.6) # # @postcopy-ram: Start executing on the migration target before all of RAM has -# been migrated, pulling the remaining pages along as needed. The -# capacity must have the same setting on both source and target -# or migration will not even start. NOTE: If the migration fails during -# postcopy the VM will fail. (since 2.6) +# been migrated, pulling the remaining pages along as needed. The +# capacity must have the same setting on both source and target +# or migration will not even start. NOTE: If the migration fails during +# postcopy the VM will fail. (since 2.6) # # @x-colo: If enabled, migration will never end, and the state of the VM on the -# primary side will be migrated continuously to the VM on secondary -# side, this process is called COarse-Grain LOck Stepping (COLO) for -# Non-stop Service. (since 2.8) +# primary side will be migrated continuously to the VM on secondary +# side, this process is called COarse-Grain LOck Stepping (COLO) for +# Non-stop Service. (since 2.8) # # @release-ram: if enabled, qemu will free the migrated ram pages on the source -# during postcopy-ram migration. (since 2.9) +# during postcopy-ram migration. (since 2.9) # # @block: If enabled, QEMU will also migrate the contents of all block -# devices. Default is disabled. A possible alternative uses -# mirror jobs to a builtin NBD server on the destination, which -# offers more flexibility. -# (Since 2.10) +# devices. Default is disabled. A possible alternative uses +# mirror jobs to a builtin NBD server on the destination, which +# offers more flexibility. +# (Since 2.10) # # @return-path: If enabled, migration will use the return path even # for precopy. (since 2.10) # # @pause-before-switchover: Pause outgoing migration before serialising device -# state and before disabling block IO (since 2.11) +# state and before disabling block IO (since 2.11) # # @multifd: Use more than one fd for migration (since 4.0) # @@ -410,11 +410,11 @@ # (since 2.12) # # @postcopy-blocktime: Calculate downtime for postcopy live migration -# (since 3.0) +# (since 3.0) # # @late-block-activate: If enabled, the destination will not activate block -# devices (and thus take locks) immediately at the end of migration. -# (since 3.0) +# devices (and thus take locks) immediately at the end of migration. +# (since 3.0) # # @x-ignore-shared: If enabled, QEMU will not migrate shared memory (since 4.0) # @@ -494,24 +494,24 @@ # Migration parameters enumeration # # @announce-initial: Initial delay (in milliseconds) before sending the first -# announce (Since 4.0) +# announce (Since 4.0) # # @announce-max: Maximum delay (in milliseconds) between packets in the -# announcement (Since 4.0) +# announcement (Since 4.0) # # @announce-rounds: Number of self-announce packets sent after migration -# (Since 4.0) +# (Since 4.0) # # @announce-step: Increase in delay (in milliseconds) between subsequent -# packets in the announcement (Since 4.0) +# packets in the announcement (Since 4.0) # # @compress-level: Set the compression level to be used in live migration, -# the compression level is an integer between 0 and 9, where 0 means -# no compression, 1 means the best compression speed, and 9 means best -# compression ratio which will consume more CPU. +# the compression level is an integer between 0 and 9, where 0 means +# no compression, 1 means the best compression speed, and 9 means best +# compression ratio which will consume more CPU. # # @compress-threads: Set compression thread count to be used in live migration, -# the compression thread count is an integer between 1 and 255. +# the compression thread count is an integer between 1 and 255. # # @compress-wait-thread: Controls behavior when all compression threads are # currently busy. If true (default), wait for a free @@ -519,10 +519,10 @@ # send the page uncompressed. (Since 3.1) # # @decompress-threads: Set decompression thread count to be used in live -# migration, the decompression thread count is an integer between 1 -# and 255. Usually, decompression is at least 4 times as fast as -# compression, so set the decompress-threads to the number about 1/4 -# of compress-threads is adequate. +# migration, the decompression thread count is an integer between 1 +# and 255. Usually, decompression is at least 4 times as fast as +# compression, so set the decompress-threads to the number about 1/4 +# of compress-threads is adequate. # # @cpu-throttle-initial: Initial percentage of time guest cpus are throttled # when migration auto-converge is activated. The @@ -560,14 +560,14 @@ # downtime in milliseconds (Since 2.8) # # @x-checkpoint-delay: The delay time (in ms) between two COLO checkpoints in -# periodic mode. (Since 2.8) +# periodic mode. (Since 2.8) # # @block-incremental: Affects how much storage is migrated when the -# block migration capability is enabled. When false, the entire -# storage backing chain is migrated into a flattened image at -# the destination; when true, only the active qcow2 layer is -# migrated and the destination must already have access to the -# same backing chain as was used on the source. (since 2.10) +# block migration capability is enabled. When false, the entire +# storage backing chain is migrated into a flattened image at +# the destination; when true, only the active qcow2 layer is +# migrated and the destination must already have access to the +# same backing chain as was used on the source. (since 2.10) # # @multifd-channels: Number of channels used to migrate data in # parallel. This is the same number that the @@ -580,8 +580,8 @@ # (Since 2.11) # # @max-postcopy-bandwidth: Background transfer bandwidth during postcopy. -# Defaults to 0 (unlimited). In bytes per second. -# (Since 3.0) +# Defaults to 0 (unlimited). In bytes per second. +# (Since 3.0) # # @max-cpu-throttle: maximum cpu throttle percentage. # Defaults to 99. (Since 3.1) @@ -604,16 +604,16 @@ # @MigrateSetParameters: # # @announce-initial: Initial delay (in milliseconds) before sending the first -# announce (Since 4.0) +# announce (Since 4.0) # # @announce-max: Maximum delay (in milliseconds) between packets in the -# announcement (Since 4.0) +# announcement (Since 4.0) # # @announce-rounds: Number of self-announce packets sent after migration -# (Since 4.0) +# (Since 4.0) # # @announce-step: Increase in delay (in milliseconds) between subsequent -# packets in the announcement (Since 4.0) +# packets in the announcement (Since 4.0) # # @compress-level: compression level # @@ -665,11 +665,11 @@ # @x-checkpoint-delay: the delay time between two COLO checkpoints. (Since 2.8) # # @block-incremental: Affects how much storage is migrated when the -# block migration capability is enabled. When false, the entire -# storage backing chain is migrated into a flattened image at -# the destination; when true, only the active qcow2 layer is -# migrated and the destination must already have access to the -# same backing chain as was used on the source. (since 2.10) +# block migration capability is enabled. When false, the entire +# storage backing chain is migrated into a flattened image at +# the destination; when true, only the active qcow2 layer is +# migrated and the destination must already have access to the +# same backing chain as was used on the source. (since 2.10) # # @multifd-channels: Number of channels used to migrate data in # parallel. This is the same number that the @@ -682,8 +682,8 @@ # (Since 2.11) # # @max-postcopy-bandwidth: Background transfer bandwidth during postcopy. -# Defaults to 0 (unlimited). In bytes per second. -# (Since 3.0) +# Defaults to 0 (unlimited). In bytes per second. +# (Since 3.0) # # @max-cpu-throttle: maximum cpu throttle percentage. # The default value is 99. (Since 3.1) @@ -737,16 +737,16 @@ # The optional members aren't actually optional. # # @announce-initial: Initial delay (in milliseconds) before sending the -# first announce (Since 4.0) +# first announce (Since 4.0) # # @announce-max: Maximum delay (in milliseconds) between packets in the -# announcement (Since 4.0) +# announcement (Since 4.0) # # @announce-rounds: Number of self-announce packets sent after migration -# (Since 4.0) +# (Since 4.0) # # @announce-step: Increase in delay (in milliseconds) between subsequent -# packets in the announcement (Since 4.0) +# packets in the announcement (Since 4.0) # # @compress-level: compression level # @@ -799,11 +799,11 @@ # @x-checkpoint-delay: the delay time between two COLO checkpoints. (Since 2.8) # # @block-incremental: Affects how much storage is migrated when the -# block migration capability is enabled. When false, the entire -# storage backing chain is migrated into a flattened image at -# the destination; when true, only the active qcow2 layer is -# migrated and the destination must already have access to the -# same backing chain as was used on the source. (since 2.10) +# block migration capability is enabled. When false, the entire +# storage backing chain is migrated into a flattened image at +# the destination; when true, only the active qcow2 layer is +# migrated and the destination must already have access to the +# same backing chain as was used on the source. (since 2.10) # # @multifd-channels: Number of channels used to migrate data in # parallel. This is the same number that the @@ -816,12 +816,12 @@ # (Since 2.11) # # @max-postcopy-bandwidth: Background transfer bandwidth during postcopy. -# Defaults to 0 (unlimited). In bytes per second. -# (Since 3.0) +# Defaults to 0 (unlimited). In bytes per second. +# (Since 3.0) # # @max-cpu-throttle: maximum cpu throttle percentage. # Defaults to 99. -# (Since 3.1) +# (Since 3.1) # # Since: 2.4 ## @@ -1047,8 +1047,8 @@ # The reason for a COLO exit. # # @none: failover has never happened. This state does not occur -# in the COLO_EXIT event, and is only visible in the result of -# query-colo-status. +# in the COLO_EXIT event, and is only visible in the result of +# query-colo-status. # # @request: COLO exit is due to an external request. # @@ -1281,11 +1281,11 @@ # of the VM are not saved by this command. # # @filename: the file to save the state of the devices to as binary -# data. See xen-save-devices-state.txt for a description of the binary -# format. +# data. See xen-save-devices-state.txt for a description of the binary +# format. # # @live: Optional argument to ask QEMU to treat this command as part of a live -# migration. Default to true. (since 2.11) +# migration. Default to true. (since 2.11) # # Returns: Nothing on success # diff --git a/qapi/misc-target.json b/qapi/misc-target.json index a00fd821eb..dee3b45930 100644 --- a/qapi/misc-target.json +++ b/qapi/misc-target.json @@ -230,14 +230,14 @@ # QEMU/KVM software version, but also decided by the hardware that # the program is running upon. # -# @version: version of GIC to be described. Currently, only 2 and 3 -# are supported. +# @version: version of GIC to be described. Currently, only 2 and 3 +# are supported. # # @emulated: whether current QEMU/hardware supports emulated GIC # device in user space. # -# @kernel: whether current QEMU/hardware supports hardware -# accelerated GIC device in kernel. +# @kernel: whether current QEMU/hardware supports hardware +# accelerated GIC device in kernel. # # Since: 2.6 ## diff --git a/qapi/misc.json b/qapi/misc.json index cd7445d29f..46e0abdfe7 100644 --- a/qapi/misc.json +++ b/qapi/misc.json @@ -14,11 +14,11 @@ # # Arguments: # -# @enable: An optional list of QMPCapability values to enable. The -# client must not enable any capability that is not -# mentioned in the QMP greeting message. If the field is not -# provided, it means no QMP capabilities will be enabled. -# (since 2.12) +# @enable: An optional list of QMPCapability values to enable. The +# client must not enable any capability that is not +# mentioned in the QMP greeting message. If the field is not +# provided, it means no QMP capabilities will be enabled. +# (since 2.12) # # Example: # @@ -27,11 +27,11 @@ # <- { "return": {} } # # Notes: This command is valid exactly when first connecting: it must be -# issued before any other command will be accepted, and will fail once the -# monitor is accepting other commands. (see qemu docs/interop/qmp-spec.txt) +# issued before any other command will be accepted, and will fail once the +# monitor is accepting other commands. (see qemu docs/interop/qmp-spec.txt) # -# The QMP client needs to explicitly enable QMP capabilities, otherwise -# all the QMP capabilities will be turned off by default. +# The QMP client needs to explicitly enable QMP capabilities, otherwise +# all the QMP capabilities will be turned off by default. # # Since: 0.13 # @@ -46,8 +46,8 @@ # Enumeration of capabilities to be advertised during initial client # connection, used for agreeing on particular QMP extension behaviors. # -# @oob: QMP ability to support out-of-band requests. -# (Please refer to qmp-spec.txt for more information on OOB) +# @oob: QMP ability to support out-of-band requests. +# (Please refer to qmp-spec.txt for more information on OOB) # # Since: 2.12 # @@ -60,11 +60,11 @@ # # A three-part version number. # -# @major: The major version number. +# @major: The major version number. # -# @minor: The minor version number. +# @minor: The minor version number. # -# @micro: The micro version number. +# @micro: The micro version number. # # Since: 2.4 ## @@ -77,16 +77,16 @@ # # A description of QEMU's version. # -# @qemu: The version of QEMU. By current convention, a micro -# version of 50 signifies a development branch. A micro version -# greater than or equal to 90 signifies a release candidate for -# the next minor version. A micro version of less than 50 -# signifies a stable release. +# @qemu: The version of QEMU. By current convention, a micro +# version of 50 signifies a development branch. A micro version +# greater than or equal to 90 signifies a release candidate for +# the next minor version. A micro version of less than 50 +# signifies a stable release. # -# @package: QEMU will always set this field to an empty string. Downstream -# versions of QEMU should set this to a non-empty string. The -# exact format depends on the downstream however it highly -# recommended that a unique name is used. +# @package: QEMU will always set this field to an empty string. Downstream +# versions of QEMU should set this to a non-empty string. The +# exact format depends on the downstream however it highly +# recommended that a unique name is used. # # Since: 0.14.0 ## @@ -98,7 +98,7 @@ # # Returns the current version of QEMU. # -# Returns: A @VersionInfo object describing the current version of QEMU. +# Returns: A @VersionInfo object describing the current version of QEMU. # # Since: 0.14.0 # @@ -333,7 +333,7 @@ # Since: 1.2.0 # # Note: This command is deprecated, because its output doesn't reflect -# compile-time configuration. Use query-qmp-schema instead. +# compile-time configuration. Use query-qmp-schema instead. # # Example: # @@ -387,8 +387,8 @@ # Returns a list of information about each iothread. # # Note: this list excludes the QEMU main loop thread, which is not declared -# using the -object iothread command-line option. It is always the main thread -# of the process. +# using the -object iothread command-line option. It is always the main thread +# of the process. # # Returns: a list of @IOThreadInfo for each iothread # @@ -636,9 +636,9 @@ # Return information about the PCI bus topology of the guest. # # Returns: a list of @PciInfo for each PCI bus. Each bus is -# represented by a json-object, which has a key with a json-array of -# all PCI devices attached to it. Each device is represented by a -# json-object. +# represented by a json-object, which has a key with a json-array of +# all PCI devices attached to it. Each device is represented by a +# json-object. # # Since: 0.14.0 # @@ -800,10 +800,10 @@ # # Since: 0.14.0 # -# Notes: This function will succeed even if the guest is already in the stopped -# state. In "inmigrate" state, it will ensure that the guest -# remains paused once migration finishes, as if the -S option was -# passed on the command line. +# Notes: This function will succeed even if the guest is already in the stopped +# state. In "inmigrate" state, it will ensure that the guest +# remains paused once migration finishes, as if the -S option was +# passed on the command line. # # Example: # @@ -859,7 +859,7 @@ # @filename: the file to save the memory to as binary data # # @cpu-index: the index of the virtual CPU to use for translating the -# virtual address (defaults to CPU 0) +# virtual address (defaults to CPU 0) # # Returns: Nothing on success # @@ -917,11 +917,11 @@ # # Returns: If successful, nothing # -# Notes: This command will succeed if the guest is currently running. It -# will also succeed if the guest is in the "inmigrate" state; in -# this case, the effect of the command is to make sure the guest -# starts once migration finishes, removing the effect of the -S -# command line option if it was passed. +# Notes: This command will succeed if the guest is currently running. It +# will also succeed if the guest is in the "inmigrate" state; in +# this case, the effect of the command is to make sure the guest +# starts once migration finishes, removing the effect of the -S +# command line option if it was passed. # # Example: # @@ -967,7 +967,7 @@ # Returns: nothing. # # Note: prior to 4.0, this command does nothing in case the guest -# isn't suspended. +# isn't suspended. # # Example: # @@ -1081,18 +1081,18 @@ # change password command. Otherwise, this specifies a new server URI # address to listen to for VNC connections. # -# @arg: If @device is a block device, then this is an optional format to open -# the device with. -# If @device is 'vnc' and @target is 'password', this is the new VNC -# password to set. See change-vnc-password for additional notes. +# @arg: If @device is a block device, then this is an optional format to open +# the device with. +# If @device is 'vnc' and @target is 'password', this is the new VNC +# password to set. See change-vnc-password for additional notes. # # Returns: Nothing on success. # If @device is not a valid block device, DeviceNotFound # -# Notes: This interface is deprecated, and it is strongly recommended that you -# avoid using it. For changing block devices, use -# blockdev-change-medium; for changing VNC parameters, use -# change-vnc-password. +# Notes: This interface is deprecated, and it is strongly recommended that you +# avoid using it. For changing block devices, use +# blockdev-change-medium; for changing VNC parameters, use +# change-vnc-password. # # Since: 0.14.0 # @@ -1731,8 +1731,8 @@ # of the VM are not loaded by this command. # # @filename: the file to load the state of the devices from as binary -# data. See xen-save-devices-state.txt for a description of the binary -# format. +# data. See xen-save-devices-state.txt for a description of the binary +# format. # # Since: 2.7 # diff --git a/qapi/net.json b/qapi/net.json index 335295be50..80dcf0df06 100644 --- a/qapi/net.json +++ b/qapi/net.json @@ -47,9 +47,9 @@ # Additional arguments depend on the type. # # TODO: This command effectively bypasses QAPI completely due to its -# "additional arguments" business. It shouldn't have been added to -# the schema in this form. It should be qapified properly, or -# replaced by a properly qapified command. +# "additional arguments" business. It shouldn't have been added to +# the schema in this form. It should be qapified properly, or +# replaced by a properly qapified command. # # Since: 0.14.0 # @@ -213,7 +213,7 @@ # @fd: file descriptor of an already opened tap # # @fds: multiple file descriptors of already opened multiqueue capable -# tap +# tap # # @script: script to initialize the interface # @@ -232,14 +232,14 @@ # @vhostfd: file descriptor of an already opened vhost net device # # @vhostfds: file descriptors of multiple already opened vhost net -# devices +# devices # # @vhostforce: vhost on for non-MSIX virtio guests # # @queues: number of queues to be created for multiqueue capable tap # # @poll-us: maximum number of microseconds that could -# be spent on busy polling for tap (since 2.7) +# be spent on busy polling for tap (since 2.7) # # Since: 1.2 ## @@ -464,7 +464,7 @@ # # Since: 1.2 # -# 'l2tpv3' - since 2.1 +# 'l2tpv3' - since 2.1 ## { 'union': 'Netdev', 'base': { 'id': 'str', 'type': 'NetClientDriver' }, @@ -691,7 +691,7 @@ # Parameters for self-announce timers # # @initial: Initial delay (in ms) before sending the first GARP/RARP -# announcement +# announcement # # @max: Maximum delay (in ms) between GARP/RARP announcement packets # @@ -700,11 +700,11 @@ # @step: Delay increase (in ms) after each self-announcement attempt # # @interfaces: An optional list of interface names, which restricts the -# announcement to the listed interfaces. (Since 4.1) +# announcement to the listed interfaces. (Since 4.1) # # @id: A name to be used to identify an instance of announce-timers -# and to allow it to modified later. Not for use as -# part of the migration parameters. (Since 4.1) +# and to allow it to modified later. Not for use as +# part of the migration parameters. (Since 4.1) # # Since: 4.0 ## diff --git a/qapi/qdev.json b/qapi/qdev.json index c6d05032f4..f4ed9735c4 100644 --- a/qapi/qdev.json +++ b/qapi/qdev.json @@ -19,8 +19,8 @@ # Returns: a list of ObjectPropertyInfo describing a devices properties # # Note: objects can create properties at runtime, for example to describe -# links between different devices and/or objects. These properties -# are not included in the output of this command. +# links between different devices and/or objects. These properties +# are not included in the output of this command. # # Since: 1.2 ## @@ -58,9 +58,9 @@ # <- { "return": {} } # # TODO: This command effectively bypasses QAPI completely due to its -# "additional arguments" business. It shouldn't have been added to -# the schema in this form. It should be qapified properly, or -# replaced by a properly qapified command. +# "additional arguments" business. It shouldn't have been added to +# the schema in this form. It should be qapified properly, or +# replaced by a properly qapified command. # # Since: 0.13 ## diff --git a/qapi/qom.json b/qapi/qom.json index 1e3c2ad555..ecc60c4401 100644 --- a/qapi/qom.json +++ b/qapi/qom.json @@ -189,8 +189,8 @@ # @typename: the type name of an object # # Note: objects can create properties at runtime, for example to describe -# links between different devices and/or objects. These properties -# are not included in the output of this command. +# links between different devices and/or objects. These properties +# are not included in the output of this command. # # Returns: a list of ObjectPropertyInfo describing object properties # diff --git a/qapi/rocker.json b/qapi/rocker.json index 3587661161..52597db491 100644 --- a/qapi/rocker.json +++ b/qapi/rocker.json @@ -140,7 +140,7 @@ # @ip-dst: IP header destination address # # Note: optional members may or may not appear in the flow key -# depending if they're relevant to the flow key. +# depending if they're relevant to the flow key. # # Since: 2.4 ## @@ -170,7 +170,7 @@ # @ip-tos: IP header TOS field # # Note: optional members may or may not appear in the flow mask -# depending if they're relevant to the flow mask. +# depending if they're relevant to the flow mask. # # Since: 2.4 ## @@ -197,7 +197,7 @@ # @out-pport: physical output port # # Note: optional members may or may not appear in the flow action -# depending if they're relevant to the flow action. +# depending if they're relevant to the flow action. # # Since: 2.4 ## @@ -235,7 +235,7 @@ # @name: switch name # # @tbl-id: flow table ID. If tbl-id is not specified, returns -# flow information for all tables. +# flow information for all tables. # # Returns: rocker OF-DPA flow information # @@ -291,7 +291,7 @@ # @ttl-check: perform TTL check # # Note: optional members may or may not appear in the group depending -# if they're relevant to the group type. +# if they're relevant to the group type. # # Since: 2.4 ## @@ -311,7 +311,7 @@ # @name: switch name # # @type: group type. If type is not specified, returns -# group information for all group types. +# group information for all group types. # # Returns: rocker OF-DPA group information # diff --git a/qapi/run-state.json b/qapi/run-state.json index b83a436a3e..2e22907740 100644 --- a/qapi/run-state.json +++ b/qapi/run-state.json @@ -15,16 +15,16 @@ # @finish-migrate: guest is paused to finish the migration process # # @inmigrate: guest is paused waiting for an incoming migration. Note -# that this state does not tell whether the machine will start at the -# end of the migration. This depends on the command-line -S option and -# any invocation of 'stop' or 'cont' that has happened since QEMU was -# started. +# that this state does not tell whether the machine will start at the +# end of the migration. This depends on the command-line -S option and +# any invocation of 'stop' or 'cont' that has happened since QEMU was +# started. # # @internal-error: An internal error that prevents further guest execution -# has occurred +# has occurred # # @io-error: the last IOP has failed and the device is configured to pause -# on I/O errors +# on I/O errors # # @paused: guest has been paused via the 'stop' command # @@ -85,8 +85,8 @@ # @guest-panic: Guest panicked, and command line turns that into a shutdown # # @subsystem-reset: Partial guest reset that does not trigger QMP events and -# ignores --no-reboot. This is useful for sanitizing -# hypercalls on s390 that are used during kexec/kdump/boot +# ignores --no-reboot. This is useful for sanitizing +# hypercalls on s390 that are used during kexec/kdump/boot # ## { 'enum': 'ShutdownCause', @@ -140,13 +140,13 @@ # about to exit. # # @guest: If true, the shutdown was triggered by a guest request (such as -# a guest-initiated ACPI shutdown request or other hardware-specific action) -# rather than a host request (such as sending qemu a SIGINT). (since 2.10) +# a guest-initiated ACPI shutdown request or other hardware-specific action) +# rather than a host request (such as sending qemu a SIGINT). (since 2.10) # # @reason: The @ShutdownCause which resulted in the SHUTDOWN. (since 4.0) # # Note: If the command-line option "-no-shutdown" has been specified, qemu will -# not exit, and a STOP event will eventually follow the SHUTDOWN event +# not exit, and a STOP event will eventually follow the SHUTDOWN event # # Since: 0.12.0 # @@ -180,9 +180,9 @@ # Emitted when the virtual machine is reset # # @guest: If true, the reset was triggered by a guest request (such as -# a guest-initiated ACPI reboot request or other hardware-specific action) -# rather than a host request (such as the QMP command system_reset). -# (since 2.10) +# a guest-initiated ACPI reboot request or other hardware-specific action) +# rather than a host request (such as the QMP command system_reset). +# (since 2.10) # # @reason: The @ShutdownCause of the RESET. (since 4.0) # @@ -283,7 +283,7 @@ # @action: action that has been taken # # Note: If action is "reset", "shutdown", or "pause" the WATCHDOG event is -# followed respectively by the RESET, SHUTDOWN, or STOP events +# followed respectively by the RESET, SHUTDOWN, or STOP events # # Note: This event is rate-limited. # @@ -441,12 +441,12 @@ # @disabled-wait: the CPU has entered a disabled wait state # # @extint-loop: clock comparator or cpu timer interrupt with new PSW enabled -# for external interrupts +# for external interrupts # # @pgmint-loop: program interrupt with BAD new PSW # # @opint-loop: operation exception interrupt with invalid code at the program -# interrupt new PSW +# interrupt new PSW # # Since: 2.12 ## diff --git a/qapi/sockets.json b/qapi/sockets.json index 32375f3a36..ea933ed4b2 100644 --- a/qapi/sockets.json +++ b/qapi/sockets.json @@ -89,7 +89,7 @@ # @port: port # # Note: string types are used to allow for possible future hostname or -# service resolution support. +# service resolution support. # # Since: 2.8 ## @@ -104,9 +104,9 @@ # Captures the address of a socket, which could also be a named file descriptor # # Note: This type is deprecated in favor of SocketAddress. The -# difference between SocketAddressLegacy and SocketAddress is that the -# latter is a flat union rather than a simple union. Flat is nicer -# because it avoids nesting on the wire, i.e. that form has fewer {}. +# difference between SocketAddressLegacy and SocketAddress is that the +# latter is a flat union rather than a simple union. Flat is nicer +# because it avoids nesting on the wire, i.e. that form has fewer {}. # # Since: 1.3 diff --git a/qapi/trace.json b/qapi/trace.json index 799b254a18..4955e5a750 100644 --- a/qapi/trace.json +++ b/qapi/trace.json @@ -52,14 +52,14 @@ # # Returns: a list of @TraceEventInfo for the matching events # -# An event is returned if: -# - its name matches the @name pattern, and -# - if @vcpu is given, the event has the "vcpu" property. -# -# Therefore, if @vcpu is given, the operation will only match per-vCPU events, -# returning their state on the specified vCPU. Special case: if @name is an -# exact match, @vcpu is given and the event does not have the "vcpu" property, -# an error is returned. +# An event is returned if: +# - its name matches the @name pattern, and +# - if @vcpu is given, the event has the "vcpu" property. +# +# Therefore, if @vcpu is given, the operation will only match per-vCPU events, +# returning their state on the specified vCPU. Special case: if @name is an +# exact match, @vcpu is given and the event does not have the "vcpu" property, +# an error is returned. # # Since: 2.2 # diff --git a/qapi/transaction.json b/qapi/transaction.json index 0590dbcd1a..04301f1be7 100644 --- a/qapi/transaction.json +++ b/qapi/transaction.json @@ -132,8 +132,8 @@ # Errors depend on the operations of the transaction # # Note: The transaction aborts on the first failure. Therefore, there will be -# information on only one failed operation returned in an error condition, and -# subsequent actions will not have been attempted. +# information on only one failed operation returned in an error condition, and +# subsequent actions will not have been attempted. # # Since: 1.1 # diff --git a/qapi/ui.json b/qapi/ui.json index f8c803fe43..ba873e1e29 100644 --- a/qapi/ui.json +++ b/qapi/ui.json @@ -18,10 +18,10 @@ # @password: the new password # # @connected: how to handle existing clients when changing the -# password. If nothing is specified, defaults to `keep' -# `fail' to fail the command if clients are connected -# `disconnect' to disconnect existing clients -# `keep' to maintain existing clients +# password. If nothing is specified, defaults to `keep' +# `fail' to fail the command if clients are connected +# `disconnect' to disconnect existing clients +# `keep' to maintain existing clients # # Returns: Nothing on success # If Spice is not enabled, DeviceNotFound @@ -591,12 +591,12 @@ # # Change the VNC server password. # -# @password: the new password to use with VNC authentication +# @password: the new password to use with VNC authentication # # Since: 1.1 # -# Notes: An empty password in this command will set the password to the empty -# string. Existing clients are unaffected by executing this command. +# Notes: An empty password in this command will set the password to the empty +# string. Existing clients are unaffected by executing this command. ## { 'command': 'change-vnc-password', 'data': { 'password': 'str' }, @@ -612,7 +612,7 @@ # @client: client information # # Note: This event is emitted before any authentication takes place, thus -# the authentication ID is not provided +# the authentication ID is not provided # # Since: 0.13.0 # @@ -915,9 +915,9 @@ # # Pointer motion input event. # -# @axis: Which axis is referenced by @value. -# @value: Pointer position. For absolute coordinates the -# valid range is 0 -> 0x7ffff +# @axis: Which axis is referenced by @value. +# @value: Pointer position. For absolute coordinates the +# valid range is 0 -> 0x7ffff # # Since: 2.0 ## @@ -931,10 +931,10 @@ # Input event union. # # @type: the input type, one of: -# - 'key': Input event of Keyboard -# - 'btn': Input event of pointer buttons -# - 'rel': Input event of relative pointer motion -# - 'abs': Input event of absolute pointer motion +# - 'key': Input event of Keyboard +# - 'btn': Input event of pointer buttons +# - 'rel': Input event of relative pointer motion +# - 'abs': Input event of absolute pointer motion # # Since: 2.0 ## @@ -970,9 +970,9 @@ # Since: 2.6 # # Note: The consoles are visible in the qom tree, under -# /backend/console[$index]. They have a device link and head property, -# so it is possible to map which console belongs to which device and -# display. +# /backend/console[$index]. They have a device link and head property, +# so it is possible to map which console belongs to which device and +# display. # # Example: # |