diff options
Diffstat (limited to 'qapi-schema.json')
| -rw-r--r-- | qapi-schema.json | 206 |
1 files changed, 185 insertions, 21 deletions
diff --git a/qapi-schema.json b/qapi-schema.json index 4a4a850f5f..f9dbdae699 100644 --- a/qapi-schema.json +++ b/qapi-schema.json @@ -33,6 +33,31 @@ 'MigrationExpected' ] } ## +# @add_client +# +# Allow client connections for VNC, Spice and socket based +# character devices to be passed in to QEMU via SCM_RIGHTS. +# +# @protocol: protocol name. Valid names are "vnc", "spice" or the +# name of a character device (eg. from -chardev id=XXXX) +# +# @fdname: file descriptor name previously passed via 'getfd' command +# +# @skipauth: #optional whether to skip authentication. Only applies +# to "vnc" and "spice" protocols +# +# @tls: #optional whether to perform TLS. Only applies to the "spice" +# protocol +# +# Returns: nothing on success. +# +# Since: 0.14.0 +## +{ 'command': 'add_client', + 'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool', + '*tls': 'bool' } } + +## # @NameInfo: # # Guest name information. @@ -1088,6 +1113,29 @@ { 'command': 'query-pci', 'returns': ['PciInfo'] } ## +# @BlockdevOnError: +# +# An enumeration of possible behaviors for errors on I/O operations. +# The exact meaning depends on whether the I/O was initiated by a guest +# or by a block job +# +# @report: for guest operations, report the error to the guest; +# for jobs, cancel the job +# +# @ignore: ignore the error, only report a QMP event (BLOCK_IO_ERROR +# or BLOCK_JOB_ERROR) +# +# @enospc: same as @stop on ENOSPC, same as @report otherwise. +# +# @stop: for guest operations, stop the virtual machine; +# for jobs, pause the job +# +# Since: 1.3 +## +{ 'enum': 'BlockdevOnError', + 'data': ['report', 'ignore', 'enospc', 'stop'] } + +## # @BlockJobInfo: # # Information about a long-running block device operation. @@ -1098,15 +1146,24 @@ # # @len: the maximum progress value # +# @busy: false if the job is known to be in a quiescent state, with +# no pending I/O. Since 1.3. +# +# @paused: whether the job is paused or, if @busy is true, will +# pause itself as soon as possible. Since 1.3. +# # @offset: the current progress value # # @speed: the rate limit, bytes per second # +# @io-status: the status of the job (since 1.3) +# # Since: 1.1 ## { 'type': 'BlockJobInfo', 'data': {'type': 'str', 'device': 'str', 'len': 'int', - 'offset': 'int', 'speed': 'int'} } + 'offset': 'int', 'busy': 'bool', 'paused': 'bool', 'speed': 'int', + 'io-status': 'BlockDeviceIoStatus'} } ## # @query-block-jobs: @@ -1374,7 +1431,7 @@ # @format: #optional the format of the snapshot image, default is 'qcow2'. # # @mode: #optional whether and how QEMU should create a new image, default is -# 'absolute-paths'. +# 'absolute-paths'. ## { 'type': 'BlockdevSnapshot', 'data': { 'device': 'str', 'snapshot-file': 'str', '*format': 'str', @@ -1428,7 +1485,7 @@ # @format: #optional the format of the snapshot image, default is 'qcow2'. # # @mode: #optional whether and how QEMU should create a new image, default is -# 'absolute-paths'. +# 'absolute-paths'. # # Returns: nothing on success # If @device is not a valid block device, DeviceNotFound @@ -1468,6 +1525,40 @@ 'returns': 'str' } ## +# @block-commit +# +# Live commit of data from overlay image nodes into backing nodes - i.e., +# writes data between 'top' and 'base' into 'base'. +# +# @device: the name of the device +# +# @base: #optional The file name of the backing image to write data into. +# If not specified, this is the deepest backing image +# +# @top: The file name of the backing image within the image chain, +# which contains the topmost data to be committed down. +# Note, the active layer as 'top' is currently unsupported. +# +# If top == base, that is an error. +# +# +# @speed: #optional the maximum speed, in bytes per second +# +# Returns: Nothing on success +# If commit or stream is already active on this device, DeviceInUse +# If @device does not exist, DeviceNotFound +# If image commit is not supported by this device, NotSupported +# If @base or @top is invalid, a generic error is returned +# If @top is the active layer, or omitted, a generic error is returned +# If @speed is invalid, InvalidParameter +# +# Since: 1.3 +# +## +{ 'command': 'block-commit', + 'data': { 'device': 'str', '*base': 'str', 'top': 'str', + '*speed': 'int' } } + # @migrate_cancel # # Cancel the current executing migration process. @@ -1803,13 +1894,18 @@ # # @speed: #optional the maximum speed, in bytes per second # +# @on-error: #optional the action to take on an error (default report). +# 'stop' and 'enospc' can only be used if the block device +# supports io-status (see BlockInfo). Since 1.3. +# # Returns: Nothing on success # If @device does not exist, DeviceNotFound # # Since: 1.1 ## -{ 'command': 'block-stream', 'data': { 'device': 'str', '*base': 'str', - '*speed': 'int' } } +{ 'command': 'block-stream', + 'data': { 'device': 'str', '*base': 'str', '*speed': 'int', + '*on-error': 'BlockdevOnError' } } ## # @block-job-set-speed: @@ -1853,12 +1949,58 @@ # # @device: the device name # +# @force: #optional whether to allow cancellation of a paused job (default +# false). Since 1.3. +# # Returns: Nothing on success # If no background operation is active on this device, DeviceNotActive # # Since: 1.1 ## -{ 'command': 'block-job-cancel', 'data': { 'device': 'str' } } +{ 'command': 'block-job-cancel', 'data': { 'device': 'str', '*force': 'bool' } } + +## +# @block-job-pause: +# +# Pause an active background block operation. +# +# This command returns immediately after marking the active background block +# operation for pausing. It is an error to call this command if no +# operation is in progress. Pausing an already paused job has no cumulative +# effect; a single block-job-resume command will resume the job. +# +# The operation will pause as soon as possible. No event is emitted when +# the operation is actually paused. Cancelling a paused job automatically +# resumes it. +# +# @device: the device name +# +# Returns: Nothing on success +# If no background operation is active on this device, DeviceNotActive +# +# Since: 1.3 +## +{ 'command': 'block-job-pause', 'data': { 'device': 'str' } } + +## +# @block-job-resume: +# +# Resume an active background block operation. +# +# This command returns immediately after resuming a paused background block +# operation. It is an error to call this command if no operation is in +# progress. Resuming an already running job is not an error. +# +# This command also clears the error status of the job. +# +# @device: the device name +# +# Returns: Nothing on success +# If no background operation is active on this device, DeviceNotActive +# +# Since: 1.3 +## +{ 'command': 'block-job-resume', 'data': { 'device': 'str' } } ## # @ObjectTypeInfo: @@ -1995,26 +2137,33 @@ # supported on i386 and x86_64. # # @paging: if true, do paging to get guest's memory mapping. This allows -# using gdb to process the core file. However, setting @paging to false -# may be desirable because of two reasons: +# using gdb to process the core file. +# +# IMPORTANT: this option can make QEMU allocate several gigabytes +# of RAM. This can happen for a large guest, or a +# malicious guest pretending to be large. # -# 1. The guest may be in a catastrophic state or can have corrupted -# memory, which cannot be trusted -# 2. The guest can be in real-mode even if paging is enabled. For example, -# the guest uses ACPI to sleep, and ACPI sleep state goes in real-mode +# Also, paging=true has the following limitations: +# +# 1. The guest may be in a catastrophic state or can have corrupted +# memory, which cannot be trusted +# 2. The guest can be in real-mode even if paging is enabled. For +# example, the guest uses ACPI to sleep, and ACPI sleep state +# goes in real-mode # # @protocol: the filename or file descriptor of the vmcore. The supported -# protocols are: +# protocols are: # -# 1. file: the protocol starts with "file:", and the following string is -# the file's path. -# 2. fd: the protocol starts with "fd:", and the following string is the -# fd's name. +# 1. file: the protocol starts with "file:", and the following +# string is the file's path. +# 2. fd: the protocol starts with "fd:", and the following string +# is the fd's name. # # @begin: #optional if specified, the starting physical address. # # @length: #optional if specified, the memory size, in bytes. If you don't -# want to dump all guest's memory, please specify the start @begin and @length +# want to dump all guest's memory, please specify the start @begin +# and @length # # Returns: nothing on success # @@ -2023,6 +2172,7 @@ { 'command': 'dump-guest-memory', 'data': { 'paging': 'bool', 'protocol': 'str', '*begin': 'int', '*length': 'int' } } + ## # @netdev_add: # @@ -2601,12 +2751,26 @@ 'lf', 'help', 'meta_l', 'meta_r', 'compose' ] } ## +# @KeyValue +# +# Represents a keyboard key. +# +# Since: 1.3.0 +## +{ 'union': 'KeyValue', + 'data': { + 'number': 'int', + 'qcode': 'QKeyCode' } } + +## # @send-key: # # Send keys to guest. # -# @keys: key sequence. 'keys' is the name of the key. Use a JSON array to -# press several keys simultaneously. +# @keys: An array of @KeyValue elements. All @KeyValues in this array are +# simultaneously sent to the guest. A @KeyValue.number value is sent +# directly to the guest, while @KeyValue.qcode must be a valid +# @QKeyCode value # # @hold-time: #optional time to delay key up events, milliseconds. Defaults # to 100 @@ -2618,7 +2782,7 @@ # ## { 'command': 'send-key', - 'data': { 'keys': ['QKeyCode'], '*hold-time': 'int' } } + 'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } } ## # @screendump: |