diff options
Diffstat (limited to 'linux-user/generic/target_errno_defs.h')
| -rw-r--r-- | linux-user/generic/target_errno_defs.h | 167 |
1 files changed, 167 insertions, 0 deletions
diff --git a/linux-user/generic/target_errno_defs.h b/linux-user/generic/target_errno_defs.h new file mode 100644 index 0000000000..17d85e0b61 --- /dev/null +++ b/linux-user/generic/target_errno_defs.h @@ -0,0 +1,167 @@ +/* + * Target definitions of errnos. These may be overridden by an + * architecture specific header if needed. + * + * Taken from asm-generic/errno-base.h and asm-generic/errno.h + */ + +#ifndef GENERIC_TARGET_ERRNO_DEFS_H +#define GENERIC_TARGET_ERRNO_DEFS_H + +#define TARGET_EPERM 1 /* Operation not permitted */ +#define TARGET_ENOENT 2 /* No such file or directory */ +#define TARGET_ESRCH 3 /* No such process */ +#define TARGET_EINTR 4 /* Interrupted system call */ +#define TARGET_EIO 5 /* I/O error */ +#define TARGET_ENXIO 6 /* No such device or address */ +#define TARGET_E2BIG 7 /* Argument list too long */ +#define TARGET_ENOEXEC 8 /* TARGET_Exec format error */ +#define TARGET_EBADF 9 /* Bad file number */ +#define TARGET_ECHILD 10 /* No child processes */ +#define TARGET_EAGAIN 11 /* Try again */ +#define TARGET_ENOMEM 12 /* Out of memory */ +#define TARGET_EACCES 13 /* Permission denied */ +#define TARGET_EFAULT 14 /* Bad address */ +#define TARGET_ENOTBLK 15 /* Block device required */ +#define TARGET_EBUSY 16 /* Device or resource busy */ +#define TARGET_EEXIST 17 /* File exists */ +#define TARGET_EXDEV 18 /* Cross-device link */ +#define TARGET_ENODEV 19 /* No such device */ +#define TARGET_ENOTDIR 20 /* Not a directory */ +#define TARGET_EISDIR 21 /* Is a directory */ +#define TARGET_EINVAL 22 /* Invalid argument */ +#define TARGET_ENFILE 23 /* File table overflow */ +#define TARGET_EMFILE 24 /* Too many open files */ +#define TARGET_ENOTTY 25 /* Not a typewriter */ +#define TARGET_ETXTBSY 26 /* Text file busy */ +#define TARGET_EFBIG 27 /* File too large */ +#define TARGET_ENOSPC 28 /* No space left on device */ +#define TARGET_ESPIPE 29 /* Illegal seek */ +#define TARGET_EROFS 30 /* Read-only file system */ +#define TARGET_EMLINK 31 /* Too many links */ +#define TARGET_EPIPE 32 /* Broken pipe */ +#define TARGET_EDOM 33 /* Math argument out of domain of func */ +#define TARGET_ERANGE 34 /* Math result not representable */ + +#define TARGET_EDEADLK 35 /* Resource deadlock would occur */ +#define TARGET_ENAMETOOLONG 36 /* File name too long */ +#define TARGET_ENOLCK 37 /* No record locks available */ +#define TARGET_ENOSYS 38 /* Function not implemented */ +#define TARGET_ENOTEMPTY 39 /* Directory not empty */ +#define TARGET_ELOOP 40 /* Too many symbolic links encountered */ + +#define TARGET_ENOMSG 42 /* No message of desired type */ +#define TARGET_EIDRM 43 /* Identifier removed */ +#define TARGET_ECHRNG 44 /* Channel number out of range */ +#define TARGET_EL2NSYNC 45 /* Level 2 not synchronized */ +#define TARGET_EL3HLT 46 /* Level 3 halted */ +#define TARGET_EL3RST 47 /* Level 3 reset */ +#define TARGET_ELNRNG 48 /* Link number out of range */ +#define TARGET_EUNATCH 49 /* Protocol driver not attached */ +#define TARGET_ENOCSI 50 /* No CSI structure available */ +#define TARGET_EL2HLT 51 /* Level 2 halted */ +#define TARGET_EBADE 52 /* Invalid exchange */ +#define TARGET_EBADR 53 /* Invalid request descriptor */ +#define TARGET_EXFULL 54 /* TARGET_Exchange full */ +#define TARGET_ENOANO 55 /* No anode */ +#define TARGET_EBADRQC 56 /* Invalid request code */ +#define TARGET_EBADSLT 57 /* Invalid slot */ + +#define TARGET_EBFONT 59 /* Bad font file format */ +#define TARGET_ENOSTR 60 /* Device not a stream */ +#define TARGET_ENODATA 61 /* No data available */ +#define TARGET_ETIME 62 /* Timer expired */ +#define TARGET_ENOSR 63 /* Out of streams resources */ +#define TARGET_ENONET 64 /* Machine is not on the network */ +#define TARGET_ENOPKG 65 /* Package not installed */ +#define TARGET_EREMOTE 66 /* Object is remote */ +#define TARGET_ENOLINK 67 /* Link has been severed */ +#define TARGET_EADV 68 /* Advertise error */ +#define TARGET_ESRMNT 69 /* Srmount error */ +#define TARGET_ECOMM 70 /* Communication error on send */ +#define TARGET_EPROTO 71 /* Protocol error */ +#define TARGET_EMULTIHOP 72 /* Multihop attempted */ +#define TARGET_EDOTDOT 73 /* RFS specific error */ +#define TARGET_EBADMSG 74 /* Not a data message */ +#define TARGET_EOVERFLOW 75 /* Value too large for defined data type */ +#define TARGET_ENOTUNIQ 76 /* Name not unique on network */ +#define TARGET_EBADFD 77 /* File descriptor in bad state */ +#define TARGET_EREMCHG 78 /* Remote address changed */ +#define TARGET_ELIBACC 79 /* Can not access a needed shared library */ +#define TARGET_ELIBBAD 80 /* Accessing a corrupted shared library */ +#define TARGET_ELIBSCN 81 /* .lib section in a.out corrupted */ +#define TARGET_ELIBMAX 82 /* Attempting to link in too many shared libraries */ +#define TARGET_ELIBEXEC 83 /* Cannot exec a shared library directly */ +#define TARGET_EILSEQ 84 /* Illegal byte sequence */ +#define TARGET_ERESTART 85 /* Interrupted system call should be restarted */ +#define TARGET_ESTRPIPE 86 /* Streams pipe error */ +#define TARGET_EUSERS 87 /* Too many users */ +#define TARGET_ENOTSOCK 88 /* Socket operation on non-socket */ +#define TARGET_EDESTADDRREQ 89 /* Destination address required */ +#define TARGET_EMSGSIZE 90 /* Message too long */ +#define TARGET_EPROTOTYPE 91 /* Protocol wrong type for socket */ +#define TARGET_ENOPROTOOPT 92 /* Protocol not available */ +#define TARGET_EPROTONOSUPPORT 93 /* Protocol not supported */ +#define TARGET_ESOCKTNOSUPPORT 94 /* Socket type not supported */ +#define TARGET_EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ +#define TARGET_EPFNOSUPPORT 96 /* Protocol family not supported */ +#define TARGET_EAFNOSUPPORT 97 /* Address family not supported by protocol */ +#define TARGET_EADDRINUSE 98 /* Address already in use */ +#define TARGET_EADDRNOTAVAIL 99 /* Cannot assign requested address */ +#define TARGET_ENETDOWN 100 /* Network is down */ +#define TARGET_ENETUNREACH 101 /* Network is unreachable */ +#define TARGET_ENETRESET 102 /* Network dropped connection because of reset */ +#define TARGET_ECONNABORTED 103 /* Software caused connection abort */ +#define TARGET_ECONNRESET 104 /* Connection reset by peer */ +#define TARGET_ENOBUFS 105 /* No buffer space available */ +#define TARGET_EISCONN 106 /* Transport endpoint is already connected */ +#define TARGET_ENOTCONN 107 /* Transport endpoint is not connected */ +#define TARGET_ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ +#define TARGET_ETOOMANYREFS 109 /* Too many references: cannot splice */ +#define TARGET_ETIMEDOUT 110 /* Connection timed out */ +#define TARGET_ECONNREFUSED 111 /* Connection refused */ +#define TARGET_EHOSTDOWN 112 /* Host is down */ +#define TARGET_EHOSTUNREACH 113 /* No route to host */ +#define TARGET_EALREADY 114 /* Operation already in progress */ +#define TARGET_EINPROGRESS 115 /* Operation now in progress */ +#define TARGET_ESTALE 116 /* Stale NFS file handle */ +#define TARGET_EUCLEAN 117 /* Structure needs cleaning */ +#define TARGET_ENOTNAM 118 /* Not a XENIX named type file */ +#define TARGET_ENAVAIL 119 /* No XENIX semaphores available */ +#define TARGET_EISNAM 120 /* Is a named type file */ +#define TARGET_EREMOTEIO 121 /* Remote I/O error */ +#define TARGET_EDQUOT 122 /* Quota exceeded */ + +#define TARGET_ENOMEDIUM 123 /* No medium found */ +#define TARGET_EMEDIUMTYPE 124 /* Wrong medium type */ +#define TARGET_ECANCELED 125 /* Operation Canceled */ +#define TARGET_ENOKEY 126 /* Required key not available */ +#define TARGET_EKEYEXPIRED 127 /* Key has expired */ +#define TARGET_EKEYREVOKED 128 /* Key has been revoked */ +#define TARGET_EKEYREJECTED 129 /* Key was rejected by service */ + +/* for robust mutexes */ +#define TARGET_EOWNERDEAD 130 /* Owner died */ +#define TARGET_ENOTRECOVERABLE 131 /* State not recoverable */ + +#define TARGET_ERFKILL 132 /* Operation not possible due to RF-kill */ +#define TARGET_EHWPOISON 133 /* Memory page has hardware error */ + +/* QEMU internal, not visible to the guest. This is returned when a + * system call should be restarted, to tell the main loop that it + * should wind the guest PC backwards so it will re-execute the syscall + * after handling any pending signals. They match with the ones the guest + * kernel uses for the same purpose. + */ +#define TARGET_ERESTARTSYS 512 /* Restart system call (if SA_RESTART) */ + +/* QEMU internal, not visible to the guest. This is returned by the + * do_sigreturn() code after a successful sigreturn syscall, to indicate + * that it has correctly set the guest registers and so the main loop + * should not touch them. We use the value the guest would use for + * ERESTART_NOINTR (which is kernel internal) to guarantee that we won't + * clash with a valid guest errno now or in the future. + */ +#define TARGET_QEMU_ESIGRETURN 513 /* Return from signal */ + +#endif |