aboutsummaryrefslogtreecommitdiff
path: root/hw
diff options
context:
space:
mode:
Diffstat (limited to 'hw')
-rw-r--r--hw/eepro100.c1714
-rw-r--r--hw/eeprom93xx.c312
-rw-r--r--hw/eeprom93xx.h43
-rw-r--r--hw/pci.c6
4 files changed, 2075 insertions, 0 deletions
diff --git a/hw/eepro100.c b/hw/eepro100.c
new file mode 100644
index 0000000000..ea18b890d0
--- /dev/null
+++ b/hw/eepro100.c
@@ -0,0 +1,1714 @@
+/*
+ * QEMU i8255x (PRO100) emulation
+ *
+ * Copyright (c) 2006-2007 Stefan Weil
+ *
+ * Portions of the code are copies from grub / etherboot eepro100.c
+ * and linux e100.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Tested features (i82559):
+ * PXE boot (i386) no valid link
+ * Linux networking (i386) ok
+ *
+ * Untested:
+ * non-i386 platforms
+ * Windows networking
+ *
+ * References:
+ *
+ * Intel 8255x 10/100 Mbps Ethernet Controller Family
+ * Open Source Software Developer Manual
+ */
+
+#if defined(TARGET_I386)
+# warning "PXE boot still not working!"
+#endif
+
+#include <assert.h>
+#include <stddef.h> /* offsetof */
+#include "vl.h"
+#include "eeprom93xx.h"
+
+/* Common declarations for all PCI devices. */
+
+#define PCI_VENDOR_ID 0x00 /* 16 bits */
+#define PCI_DEVICE_ID 0x02 /* 16 bits */
+#define PCI_COMMAND 0x04 /* 16 bits */
+#define PCI_STATUS 0x06 /* 16 bits */
+
+#define PCI_REVISION_ID 0x08 /* 8 bits */
+#define PCI_CLASS_CODE 0x0b /* 8 bits */
+#define PCI_SUBCLASS_CODE 0x0a /* 8 bits */
+#define PCI_HEADER_TYPE 0x0e /* 8 bits */
+
+#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */
+#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits */
+#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits */
+#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */
+#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */
+#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */
+
+#define PCI_CONFIG_8(offset, value) \
+ (pci_conf[offset] = (value))
+#define PCI_CONFIG_16(offset, value) \
+ (*(uint16_t *)&pci_conf[offset] = cpu_to_le16(value))
+#define PCI_CONFIG_32(offset, value) \
+ (*(uint32_t *)&pci_conf[offset] = cpu_to_le32(value))
+
+#define KiB 1024
+
+/* debug EEPRO100 card */
+//~ #define DEBUG_EEPRO100
+
+#ifdef DEBUG_EEPRO100
+#define logout(fmt, args...) fprintf(stderr, "EE100\t%-24s" fmt, __func__, ##args)
+#else
+#define logout(fmt, args...) ((void)0)
+#endif
+
+/* Set flags to 0 to disable debug output. */
+#define MDI 0
+
+#define TRACE(flag, command) ((flag) ? (command) : (void)0)
+
+#define missing(text) assert(!"feature is missing in this emulation: " text)
+
+#define MAX_ETH_FRAME_SIZE 1514
+
+/* This driver supports several different devices which are declared here. */
+#define i82551 0x82551
+#define i82557B 0x82557b
+#define i82557C 0x82557c
+#define i82558B 0x82558b
+#define i82559C 0x82559c
+#define i82559ER 0x82559e
+#define i82562 0x82562
+
+#define EEPROM_SIZE 64
+
+#define PCI_MEM_SIZE (4 * KiB)
+#define PCI_IO_SIZE 64
+#define PCI_FLASH_SIZE (128 * KiB)
+
+#define BIT(n) (1 << (n))
+#define BITS(n, m) (((0xffffffffU << (31 - n)) >> (31 - n + m)) << m)
+
+/* The SCB accepts the following controls for the Tx and Rx units: */
+#define CU_NOP 0x0000 /* No operation. */
+#define CU_START 0x0010 /* CU start. */
+#define CU_RESUME 0x0020 /* CU resume. */
+#define CU_STATSADDR 0x0040 /* Load dump counters address. */
+#define CU_SHOWSTATS 0x0050 /* Dump statistical counters. */
+#define CU_CMD_BASE 0x0060 /* Load CU base address. */
+#define CU_DUMPSTATS 0x0070 /* Dump and reset statistical counters. */
+#define CU_SRESUME 0x00a0 /* CU static resume. */
+
+#define RU_NOP 0x0000
+#define RX_START 0x0001
+#define RX_RESUME 0x0002
+#define RX_ABORT 0x0004
+#define RX_ADDR_LOAD 0x0006
+#define RX_RESUMENR 0x0007
+#define INT_MASK 0x0100
+#define DRVR_INT 0x0200 /* Driver generated interrupt. */
+
+typedef unsigned char bool;
+
+/* Offsets to the various registers.
+ All accesses need not be longword aligned. */
+enum speedo_offsets {
+ SCBStatus = 0,
+ SCBAck = 1,
+ SCBCmd = 2, /* Rx/Command Unit command and status. */
+ SCBIntmask = 3,
+ SCBPointer = 4, /* General purpose pointer. */
+ SCBPort = 8, /* Misc. commands and operands. */
+ SCBflash = 12, SCBeeprom = 14, /* EEPROM and flash memory control. */
+ SCBCtrlMDI = 16, /* MDI interface control. */
+ SCBEarlyRx = 20, /* Early receive byte count. */
+};
+
+/* A speedo3 transmit buffer descriptor with two buffers... */
+typedef struct {
+ uint16_t status;
+ uint16_t command;
+ uint32_t link; /* void * */
+ uint32_t tx_desc_addr; /* transmit buffer decsriptor array address. */
+ uint16_t tcb_bytes; /* transmit command block byte count (in lower 14 bits */
+ uint8_t tx_threshold; /* transmit threshold */
+ uint8_t tbd_count; /* TBD number */
+ //~ /* This constitutes two "TBD" entries: hdr and data */
+ //~ uint32_t tx_buf_addr0; /* void *, header of frame to be transmitted. */
+ //~ int32_t tx_buf_size0; /* Length of Tx hdr. */
+ //~ uint32_t tx_buf_addr1; /* void *, data to be transmitted. */
+ //~ int32_t tx_buf_size1; /* Length of Tx data. */
+} eepro100_tx_t;
+
+/* Receive frame descriptor. */
+typedef struct {
+ int16_t status;
+ uint16_t command;
+ uint32_t link; /* struct RxFD * */
+ uint32_t rx_buf_addr; /* void * */
+ uint16_t count;
+ uint16_t size;
+ char packet[MAX_ETH_FRAME_SIZE + 4];
+} eepro100_rx_t;
+
+typedef struct {
+ uint32_t tx_good_frames, tx_max_collisions, tx_late_collisions,
+ tx_underruns, tx_lost_crs, tx_deferred, tx_single_collisions,
+ tx_multiple_collisions, tx_total_collisions;
+ uint32_t rx_good_frames, rx_crc_errors, rx_alignment_errors,
+ rx_resource_errors, rx_overrun_errors, rx_cdt_errors,
+ rx_short_frame_errors;
+ uint32_t fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported;
+ uint16_t xmt_tco_frames, rcv_tco_frames;
+ uint32_t complete;
+} eepro100_stats_t;
+
+typedef enum {
+ cu_idle = 0,
+ cu_suspended = 1,
+ cu_active = 2,
+ cu_lpq_active = 2,
+ cu_hqp_active = 3
+} cu_state_t;
+
+typedef enum {
+ ru_idle = 0,
+ ru_suspended = 1,
+ ru_no_resources = 2,
+ ru_ready = 4
+} ru_state_t;
+
+#if defined(__BIG_ENDIAN_BITFIELD)
+#define X(a,b) b,a
+#else
+#define X(a,b) a,b
+#endif
+
+typedef struct {
+#if 1
+ uint8_t cmd;
+ uint32_t start;
+ uint32_t stop;
+ uint8_t boundary;
+ uint8_t tsr;
+ uint8_t tpsr;
+ uint16_t tcnt;
+ uint16_t rcnt;
+ uint32_t rsar;
+ uint8_t rsr;
+ uint8_t rxcr;
+ uint8_t isr;
+ uint8_t dcfg;
+ uint8_t imr;
+ uint8_t phys[6]; /* mac address */
+ uint8_t curpag;
+ uint8_t mult[8]; /* multicast mask array */
+ int mmio_index;
+ PCIDevice *pci_dev;
+ VLANClientState *vc;
+#endif
+ uint8_t scb_stat; /* SCB stat/ack byte */
+ uint8_t int_stat; /* PCI interrupt status */
+ uint32_t region[3]; /* PCI region addresses */
+ uint8_t macaddr[6];
+ uint32_t statcounter[19];
+ uint16_t mdimem[32];
+ eeprom_t *eeprom;
+ uint32_t device; /* device variant */
+ uint32_t pointer;
+ /* (cu_base + cu_offset) address the next command block in the command block list. */
+ uint32_t cu_base; /* CU base address */
+ uint32_t cu_offset; /* CU address offset */
+ /* (ru_base + ru_offset) address the RFD in the Receive Frame Area. */
+ uint32_t ru_base; /* RU base address */
+ uint32_t ru_offset; /* RU address offset */
+ uint32_t statsaddr; /* pointer to eepro100_stats_t */
+ eepro100_stats_t statistics; /* statistical counters */
+#if 0
+ uint16_t status;
+#endif
+
+ /* Configuration bytes. */
+ uint8_t configuration[22];
+
+ /* Data in mem is always in the byte order of the controller (le). */
+ uint8_t mem[PCI_MEM_SIZE];
+} EEPRO100State;
+
+/* Default values for MDI (PHY) registers */
+static const uint16_t eepro100_mdi_default[] = {
+ /* MDI Registers 0 - 6, 7 */
+ 0x3000, 0x780d, 0x02a8, 0x0154, 0x05e1, 0x0000, 0x0000, 0x0000,
+ /* MDI Registers 8 - 15 */
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ /* MDI Registers 16 - 31 */
+ 0x0003, 0x0000, 0x0001, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+/* Readonly mask for MDI (PHY) registers */
+static const uint16_t eepro100_mdi_mask[] = {
+ 0x0000, 0xffff, 0xffff, 0xffff, 0xc01f, 0xffff, 0xffff, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0fff, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff,
+ 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+#define POLYNOMIAL 0x04c11db6
+
+/* From FreeBSD */
+/* XXX: optimize */
+static int compute_mcast_idx(const uint8_t * ep)
+{
+ uint32_t crc;
+ int carry, i, j;
+ uint8_t b;
+
+ crc = 0xffffffff;
+ for (i = 0; i < 6; i++) {
+ b = *ep++;
+ for (j = 0; j < 8; j++) {
+ carry = ((crc & 0x80000000L) ? 1 : 0) ^ (b & 0x01);
+ crc <<= 1;
+ b >>= 1;
+ if (carry)
+ crc = ((crc ^ POLYNOMIAL) | carry);
+ }
+ }
+ return (crc >> 26);
+}
+
+#if defined(DEBUG_EEPRO100)
+static const char *nic_dump(const uint8_t * buf, unsigned size)
+{
+ static char dump[3 * 16 + 1];
+ char *p = &dump[0];
+ if (size > 16)
+ size = 16;
+ while (size-- > 0) {
+ p += sprintf(p, " %02x", *buf++);
+ }
+ return dump;
+}
+#endif /* DEBUG_EEPRO100 */
+
+enum scb_stat_ack {
+ stat_ack_not_ours = 0x00,
+ stat_ack_sw_gen = 0x04,
+ stat_ack_rnr = 0x10,
+ stat_ack_cu_idle = 0x20,
+ stat_ack_frame_rx = 0x40,
+ stat_ack_cu_cmd_done = 0x80,
+ stat_ack_not_present = 0xFF,
+ stat_ack_rx = (stat_ack_sw_gen | stat_ack_rnr | stat_ack_frame_rx),
+ stat_ack_tx = (stat_ack_cu_idle | stat_ack_cu_cmd_done),
+};
+
+static void disable_interrupt(EEPRO100State * s)
+{
+ if (s->int_stat) {
+ logout("interrupt disabled\n");
+ pci_set_irq(s->pci_dev, 0, 0);
+ s->int_stat = 0;
+ }
+}
+
+static void enable_interrupt(EEPRO100State * s)
+{
+ if (!s->int_stat) {
+ logout("interrupt enabled\n");
+ pci_set_irq(s->pci_dev, 0, 1);
+ s->int_stat = 1;
+ }
+}
+
+static void eepro100_acknowledge(EEPRO100State * s)
+{
+ s->scb_stat &= ~s->mem[SCBAck];
+ s->mem[SCBAck] = s->scb_stat;
+ if (s->scb_stat == 0) {
+ disable_interrupt(s);
+ }
+}
+
+static void eepro100_interrupt(EEPRO100State * s, uint8_t stat)
+{
+ uint8_t mask = ~s->mem[SCBIntmask];
+ s->mem[SCBAck] |= stat;
+ stat = s->scb_stat = s->mem[SCBAck];
+ stat &= (mask | 0x0f);
+ //~ stat &= (~s->mem[SCBIntmask] | 0x0xf);
+ if (stat && (mask & 0x01)) {
+ /* SCB mask and SCB Bit M do not disable interrupt. */
+ enable_interrupt(s);
+ } else if (s->int_stat) {
+ disable_interrupt(s);
+ }
+}
+
+static void eepro100_cx_interrupt(EEPRO100State * s)
+{
+ /* CU completed action command. */
+ /* Transmit not ok (82557 only, not in emulation). */
+ eepro100_interrupt(s, 0x80);
+}
+
+static void eepro100_cna_interrupt(EEPRO100State * s)
+{
+ /* CU left the active state. */
+ eepro100_interrupt(s, 0x20);
+}
+
+static void eepro100_fr_interrupt(EEPRO100State * s)
+{
+ /* RU received a complete frame. */
+ eepro100_interrupt(s, 0x40);
+}
+
+#if 0
+static void eepro100_rnr_interrupt(EEPRO100State * s)
+{
+ /* RU is not ready. */
+ eepro100_interrupt(s, 0x10);
+}
+#endif
+
+static void eepro100_mdi_interrupt(EEPRO100State * s)
+{
+ /* MDI completed read or write cycle. */
+ eepro100_interrupt(s, 0x08);
+}
+
+static void eepro100_swi_interrupt(EEPRO100State * s)
+{
+ /* Software has requested an interrupt. */
+ eepro100_interrupt(s, 0x04);
+}
+
+#if 0
+static void eepro100_fcp_interrupt(EEPRO100State * s)
+{
+ /* Flow control pause interrupt (82558 and later). */
+ eepro100_interrupt(s, 0x01);
+}
+#endif
+
+static void pci_reset(EEPRO100State * s)
+{
+ uint32_t device = s->device;
+ uint8_t *pci_conf = s->pci_dev->config;
+
+ logout("%p\n", s);
+
+ /* PCI Vendor ID */
+ PCI_CONFIG_16(PCI_VENDOR_ID, 0x8086);
+ /* PCI Device ID */
+ PCI_CONFIG_16(PCI_DEVICE_ID, 0x1209);
+ /* PCI Command */
+ PCI_CONFIG_16(PCI_COMMAND, 0x0000);
+ /* PCI Status */
+ PCI_CONFIG_16(PCI_STATUS, 0x2800);
+ /* PCI Revision ID */
+ PCI_CONFIG_8(PCI_REVISION_ID, 0x08);
+ /* PCI Class Code */
+ PCI_CONFIG_8(0x09, 0x00);
+ PCI_CONFIG_8(PCI_SUBCLASS_CODE, 0x00); // ethernet network controller
+ PCI_CONFIG_8(PCI_CLASS_CODE, 0x02); // network controller
+ /* PCI Cache Line Size */
+ /* check cache line size!!! */
+ //~ PCI_CONFIG_8(0x0c, 0x00);
+ /* PCI Latency Timer */
+ PCI_CONFIG_8(0x0d, 0x20); // latency timer = 32 clocks
+ /* PCI Header Type */
+ /* BIST (built-in self test) */
+#if defined(TARGET_I386)
+// !!! workaround for buggy bios
+//~ #define PCI_ADDRESS_SPACE_MEM_PREFETCH 0
+#endif
+#if 0
+ /* PCI Base Address Registers */
+ /* CSR Memory Mapped Base Address */
+ PCI_CONFIG_32(PCI_BASE_ADDRESS_0,
+ PCI_ADDRESS_SPACE_MEM | PCI_ADDRESS_SPACE_MEM_PREFETCH);
+ /* CSR I/O Mapped Base Address */
+ PCI_CONFIG_32(PCI_BASE_ADDRESS_1, PCI_ADDRESS_SPACE_IO);
+#if 0
+ /* Flash Memory Mapped Base Address */
+ PCI_CONFIG_32(PCI_BASE_ADDRESS_2, 0xfffe0000 | PCI_ADDRESS_SPACE_MEM);
+#endif
+#endif
+ /* Expansion ROM Base Address (depends on boot disable!!!) */
+ PCI_CONFIG_32(0x30, 0x00000000);
+ /* Capability Pointer */
+ PCI_CONFIG_8(0x34, 0xdc);
+ /* Interrupt Pin */
+ PCI_CONFIG_8(0x3d, 1); // interrupt pin 0
+ /* Minimum Grant */
+ PCI_CONFIG_8(0x3e, 0x08);
+ /* Maximum Latency */
+ PCI_CONFIG_8(0x3f, 0x18);
+ /* Power Management Capabilities / Next Item Pointer / Capability ID */
+ PCI_CONFIG_32(0xdc, 0x7e210001);
+
+ switch (device) {
+ case i82551:
+ //~ PCI_CONFIG_16(PCI_DEVICE_ID, 0x1209);
+ PCI_CONFIG_8(PCI_REVISION_ID, 0x0f);
+ break;
+ case i82557B:
+ PCI_CONFIG_16(PCI_DEVICE_ID, 0x1229);
+ PCI_CONFIG_8(PCI_REVISION_ID, 0x02);
+ break;
+ case i82557C:
+ PCI_CONFIG_16(PCI_DEVICE_ID, 0x1229);
+ PCI_CONFIG_8(PCI_REVISION_ID, 0x03);
+ break;
+ case i82558B:
+ PCI_CONFIG_16(PCI_DEVICE_ID, 0x1229);
+ PCI_CONFIG_16(PCI_STATUS, 0x2810);
+ PCI_CONFIG_8(PCI_REVISION_ID, 0x05);
+ break;
+ case i82559C:
+ PCI_CONFIG_16(PCI_DEVICE_ID, 0x1229);
+ PCI_CONFIG_16(PCI_STATUS, 0x2810);
+ //~ PCI_CONFIG_8(PCI_REVISION_ID, 0x08);
+ break;
+ case i82559ER:
+ //~ PCI_CONFIG_16(PCI_DEVICE_ID, 0x1209);
+ PCI_CONFIG_16(PCI_STATUS, 0x2810);
+ PCI_CONFIG_8(PCI_REVISION_ID, 0x09);
+ break;
+ //~ PCI_CONFIG_16(PCI_DEVICE_ID, 0x1029);
+ //~ PCI_CONFIG_16(PCI_DEVICE_ID, 0x1030); /* 82559 InBusiness 10/100 */
+ default:
+ logout("Device %X is undefined!\n", device);
+ }
+
+ if (device == i82557C || device == i82558B || device == i82559C) {
+ logout("Get device id and revision from EEPROM!!!\n");
+ }
+}
+
+static void nic_selective_reset(EEPRO100State * s)
+{
+ size_t i;
+ uint16_t *eeprom_contents = eeprom93xx_data(s->eeprom);
+ //~ eeprom93xx_reset(s->eeprom);
+ memcpy(eeprom_contents, s->macaddr, 6);
+ eeprom_contents[0xa] = 0x4000;
+ uint16_t sum = 0;
+ for (i = 0; i < EEPROM_SIZE - 1; i++) {
+ sum += eeprom_contents[i];
+ }
+ eeprom_contents[EEPROM_SIZE - 1] = 0xbaba - sum;
+
+ memset(s->mem, 0, sizeof(s->mem));
+ uint32_t val = BIT(21);
+ memcpy(&s->mem[SCBCtrlMDI], &val, sizeof(val));
+
+ assert(sizeof(s->mdimem) == sizeof(eepro100_mdi_default));
+ memcpy(&s->mdimem[0], &eepro100_mdi_default[0], sizeof(s->mdimem));
+}
+
+static void nic_reset(void *opaque)
+{
+ EEPRO100State *s = (EEPRO100State *) opaque;
+ logout("%p\n", s);
+ static int first;
+ if (!first) {
+ first = 1;
+ }
+ nic_selective_reset(s);
+}
+
+#if defined(DEBUG_EEPRO100)
+static const char *reg[PCI_IO_SIZE / 4] = {
+ "Command/Status",
+ "General Pointer",
+ "Port",
+ "EEPROM/Flash Control",
+ "MDI Control",
+ "Receive DMA Byte Count",
+ "Flow control register",
+ "General Status/Control"
+};
+
+static char *regname(uint32_t addr)
+{
+ static char buf[16];
+ if (addr < PCI_IO_SIZE) {
+ const char *r = reg[addr / 4];
+ if (r != 0) {
+ sprintf(buf, "%s+%u", r, addr % 4);
+ } else {
+ sprintf(buf, "0x%02x", addr);
+ }
+ } else {
+ sprintf(buf, "??? 0x%08x", addr);
+ }
+ return buf;
+}
+#endif /* DEBUG_EEPRO100 */
+
+#if 0
+static uint16_t eepro100_read_status(EEPRO100State * s)
+{
+ uint16_t val = s->status;
+ logout("val=0x%04x\n", val);
+ return val;
+}
+
+static void eepro100_write_status(EEPRO100State * s, uint16_t val)
+{
+ logout("val=0x%04x\n", val);
+ s->status = val;
+}
+#endif
+
+/*****************************************************************************
+ *
+ * Command emulation.
+ *
+ ****************************************************************************/
+
+#if 0
+static uint16_t eepro100_read_command(EEPRO100State * s)
+{
+ uint16_t val = 0xffff;
+ //~ logout("val=0x%04x\n", val);
+ return val;
+}
+#endif
+
+/* Commands that can be put in a command list entry. */
+enum commands {
+ CmdNOp = 0,
+ CmdIASetup = 1,
+ CmdConfigure = 2,
+ CmdMulticastList = 3,
+ CmdTx = 4,
+ CmdTDR = 5, /* load microcode */
+ CmdDump = 6,
+ CmdDiagnose = 7,
+
+ /* And some extra flags: */
+ CmdSuspend = 0x4000, /* Suspend after completion. */
+ CmdIntr = 0x2000, /* Interrupt after completion. */
+ CmdTxFlex = 0x0008, /* Use "Flexible mode" for CmdTx command. */
+};
+
+static cu_state_t get_cu_state(EEPRO100State * s)
+{
+ return ((s->mem[SCBStatus] >> 6) & 0x03);
+}
+
+static void set_cu_state(EEPRO100State * s, cu_state_t state)
+{
+ s->mem[SCBStatus] = (s->mem[SCBStatus] & 0x3f) + (state << 6);
+}
+
+static ru_state_t get_ru_state(EEPRO100State * s)
+{
+ return ((s->mem[SCBStatus] >> 2) & 0x0f);
+}
+
+static void set_ru_state(EEPRO100State * s, ru_state_t state)
+{
+ s->mem[SCBStatus] = (s->mem[SCBStatus] & 0xc3) + (state << 2);
+}
+
+static void dump_statistics(EEPRO100State * s)
+{
+ /* Dump statistical data. Most data is never changed by the emulation
+ * and always 0, so we first just copy the whole block and then those
+ * values which really matter.
+ * Number of data should check configuration!!!
+ */
+ cpu_physical_memory_write(s->statsaddr, (uint8_t *) & s->statistics, 64);
+ stl_phys(s->statsaddr + 0, s->statistics.tx_good_frames);
+ stl_phys(s->statsaddr + 36, s->statistics.rx_good_frames);
+ stl_phys(s->statsaddr + 48, s->statistics.rx_resource_errors);
+ stl_phys(s->statsaddr + 60, s->statistics.rx_short_frame_errors);
+ //~ stw_phys(s->statsaddr + 76, s->statistics.xmt_tco_frames);
+ //~ stw_phys(s->statsaddr + 78, s->statistics.rcv_tco_frames);
+ //~ missing("CU dump statistical counters");
+}
+
+static void eepro100_cu_command(EEPRO100State * s, uint8_t val)
+{
+ eepro100_tx_t tx;
+ uint32_t cb_address;
+ switch (val) {
+ case CU_NOP:
+ /* No operation. */
+ break;
+ case CU_START:
+ if (get_cu_state(s) != cu_idle) {
+ /* Intel documentation says that CU must be idle for the CU
+ * start command. Intel driver for Linux also starts the CU
+ * from suspended state. */
+ logout("CU state is %u, should be %u\n", get_cu_state(s), cu_idle);
+ //~ assert(!"wrong CU state");
+ }
+ set_cu_state(s, cu_active);
+ s->cu_offset = s->pointer;
+ next_command:
+ cb_address = s->cu_base + s->cu_offset;
+ cpu_physical_memory_read(cb_address, (uint8_t *) & tx, sizeof(tx));
+ uint16_t status = le16_to_cpu(tx.status);
+ uint16_t command = le16_to_cpu(tx.command);
+ logout
+ ("val=0x%02x (cu start), status=0x%04x, command=0x%04x, link=0x%08x\n",
+ val, status, command, tx.link);
+ bool bit_el = ((command & 0x8000) != 0);
+ bool bit_s = ((command & 0x4000) != 0);
+ bool bit_i = ((command & 0x2000) != 0);
+ bool bit_nc = ((command & 0x0010) != 0);
+ //~ bool bit_sf = ((command & 0x0008) != 0);
+ uint16_t cmd = command & 0x0007;
+ s->cu_offset = le32_to_cpu(tx.link);
+ switch (cmd) {
+ case CmdNOp:
+ /* Do nothing. */
+ break;
+ case CmdIASetup:
+ cpu_physical_memory_read(cb_address + 8, &s->macaddr[0], 6);
+ logout("macaddr: %s\n", nic_dump(&s->macaddr[0], 6));
+ break;
+ case CmdConfigure:
+ cpu_physical_memory_read(cb_address + 8, &s->configuration[0],
+ sizeof(s->configuration));
+ logout("configuration: %s\n", nic_dump(&s->configuration[0], 16));
+ break;
+ case CmdMulticastList:
+ //~ missing("multicast list");
+ break;
+ case CmdTx:
+ (void)0;
+ uint32_t tbd_array = le32_to_cpu(tx.tx_desc_addr);
+ uint16_t tcb_bytes = (le16_to_cpu(tx.tcb_bytes) & 0x3fff);
+ logout
+ ("transmit, TBD array address 0x%08x, TCB byte count 0x%04x, TBD count %u\n",
+ tbd_array, tcb_bytes, tx.tbd_count);
+ assert(!bit_nc);
+ //~ assert(!bit_sf);
+ assert(tcb_bytes <= 2600);
+ /* Next assertion fails for local configuration. */
+ //~ assert((tcb_bytes > 0) || (tbd_array != 0xffffffff));
+ if (!((tcb_bytes > 0) || (tbd_array != 0xffffffff))) {
+ logout
+ ("illegal values of TBD array address and TCB byte count!\n");
+ }
+ uint8_t buf[MAX_ETH_FRAME_SIZE + 4];
+ uint16_t size = 0;
+ uint32_t tbd_address = cb_address + 0x10;
+ assert(tcb_bytes <= sizeof(buf));
+ while (size < tcb_bytes) {
+ uint32_t tx_buffer_address = ldl_phys(tbd_address);
+ uint16_t tx_buffer_size = lduw_phys(tbd_address + 4);
+ //~ uint16_t tx_buffer_el = lduw_phys(tbd_address + 6);
+ tbd_address += 8;
+ logout
+ ("TBD (simplified mode): buffer address 0x%08x, size 0x%04x\n",
+ tx_buffer_address, tx_buffer_size);
+ cpu_physical_memory_read(tx_buffer_address, &buf[size],
+ tx_buffer_size);
+ size += tx_buffer_size;
+ }
+ if (tbd_array == 0xffffffff) {
+ /* Simplified mode. Was already handled by code above. */
+ } else {
+ /* Flexible mode. */
+ uint8_t tbd_count = 0;
+ if (!(s->configuration[6] & BIT(4))) {
+ /* Extended TCB. */
+ assert(tcb_bytes == 0);
+ for (; tbd_count < 2; tbd_count++) {
+ uint32_t tx_buffer_address = ldl_phys(tbd_address);
+ uint16_t tx_buffer_size = lduw_phys(tbd_address + 4);
+ uint16_t tx_buffer_el = lduw_phys(tbd_address + 6);
+ tbd_address += 8;
+ logout
+ ("TBD (extended mode): buffer address 0x%08x, size 0x%04x\n",
+ tx_buffer_address, tx_buffer_size);
+ cpu_physical_memory_read(tx_buffer_address, &buf[size],
+ tx_buffer_size);
+ size += tx_buffer_size;
+ if (tx_buffer_el & 1) {
+ break;
+ }
+ }
+ }
+ tbd_address = tbd_array;
+ for (; tbd_count < tx.tbd_count; tbd_count++) {
+ uint32_t tx_buffer_address = ldl_phys(tbd_address);
+ uint16_t tx_buffer_size = lduw_phys(tbd_address + 4);
+ uint16_t tx_buffer_el = lduw_phys(tbd_address + 6);
+ tbd_address += 8;
+ logout
+ ("TBD (flexible mode): buffer address 0x%08x, size 0x%04x\n",
+ tx_buffer_address, tx_buffer_size);
+ cpu_physical_memory_read(tx_buffer_address, &buf[size],
+ tx_buffer_size);
+ size += tx_buffer_size;
+ if (tx_buffer_el & 1) {
+ break;
+ }
+ }
+ }
+ qemu_send_packet(s->vc, buf, size);
+ s->statistics.tx_good_frames++;
+ /* Transmit with bad status would raise an CX/TNO interrupt.
+ * (82557 only). Emulation never has bad status. */
+ //~ eepro100_cx_interrupt(s);
+ break;
+ case CmdTDR:
+ logout("load microcode\n");
+ /* Starting with offset 8, the command contains
+ * 64 dwords microcode which we just ignore here. */
+ break;
+ default:
+ missing("undefined command");
+ }
+ /* Write new status (success). */
+ stw_phys(cb_address, status | 0x8000 | 0x2000);
+ if (bit_i) {
+ /* CU completed action. */
+ eepro100_cx_interrupt(s);
+ }
+ if (bit_el) {
+ /* CU becomes idle. */
+ set_cu_state(s, cu_idle);
+ eepro100_cna_interrupt(s);
+ } else if (bit_s) {
+ /* CU becomes suspended. */
+ set_cu_state(s, cu_suspended);
+ eepro100_cna_interrupt(s);
+ } else {
+ /* More entries in list. */
+ logout("CU list with at least one more entry\n");
+ goto next_command;
+ }
+ logout("CU list empty\n");
+ /* List is empty. Now CU is idle or suspended. */
+ break;
+ case CU_RESUME:
+ if (get_cu_state(s) != cu_suspended) {
+ logout("bad CU resume from CU state %u\n", get_cu_state(s));
+ /* Workaround for bad Linux eepro100 driver which resumes
+ * from idle state. */
+ //~ missing("cu resume");
+ set_cu_state(s, cu_suspended);
+ }
+ if (get_cu_state(s) == cu_suspended) {
+ logout("CU resuming\n");
+ set_cu_state(s, cu_active);
+ goto next_command;
+ }
+ break;
+ case CU_STATSADDR:
+ /* Load dump counters address. */
+ s->statsaddr = s->pointer;
+ logout("val=0x%02x (status address)\n", val);
+ break;
+ case CU_SHOWSTATS:
+ /* Dump statistical counters. */
+ dump_statistics(s);
+ break;
+ case CU_CMD_BASE:
+ /* Load CU base. */
+ logout("val=0x%02x (CU base address)\n", val);
+ s->cu_base = s->pointer;
+ break;
+ case CU_DUMPSTATS:
+ /* Dump and reset statistical counters. */
+ dump_statistics(s);
+ memset(&s->statistics, 0, sizeof(s->statistics));
+ break;
+ case CU_SRESUME:
+ /* CU static resume. */
+ missing("CU static resume");
+ break;
+ default:
+ missing("Undefined CU command");
+ }
+}
+
+static void eepro100_ru_command(EEPRO100State * s, uint8_t val)
+{
+ switch (val) {
+ case RU_NOP:
+ /* No operation. */
+ break;
+ case RX_START:
+ /* RU start. */
+ if (get_ru_state(s) != ru_idle) {
+ logout("RU state is %u, should be %u\n", get_ru_state(s), ru_idle);
+ //~ assert(!"wrong RU state");
+ }
+ set_ru_state(s, ru_ready);
+ s->ru_offset = s->pointer;
+ logout("val=0x%02x (rx start)\n", val);
+ break;
+ case RX_RESUME:
+ /* Restart RU. */
+ if (get_ru_state(s) != ru_suspended) {
+ logout("RU state is %u, should be %u\n", get_ru_state(s),
+ ru_suspended);
+ //~ assert(!"wrong RU state");
+ }
+ set_ru_state(s, ru_ready);
+ break;
+ case RX_ADDR_LOAD:
+ /* Load RU base. */
+ logout("val=0x%02x (RU base address)\n", val);
+ s->ru_base = s->pointer;
+ break;
+ default:
+ logout("val=0x%02x (undefined RU command)\n", val);
+ missing("Undefined SU command");
+ }
+}
+
+static void eepro100_write_command(EEPRO100State * s, uint8_t val)
+{
+ eepro100_ru_command(s, val & 0x0f);
+ eepro100_cu_command(s, val & 0xf0);
+ if ((val) == 0) {
+ logout("val=0x%02x\n", val);
+ }
+ /* Clear command byte after command was accepted. */
+ s->mem[SCBCmd] = 0;
+}
+
+/*****************************************************************************
+ *
+ * EEPROM emulation.
+ *
+ ****************************************************************************/
+
+#define EEPROM_CS 0x02
+#define EEPROM_SK 0x01
+#define EEPROM_DI 0x04
+#define EEPROM_DO 0x08
+
+static uint16_t eepro100_read_eeprom(EEPRO100State * s)
+{
+ uint16_t val;
+ memcpy(&val, &s->mem[SCBeeprom], sizeof(val));
+ if (eeprom93xx_read(s->eeprom)) {
+ val |= EEPROM_DO;
+ } else {
+ val &= ~EEPROM_DO;
+ }
+ return val;
+}
+
+static void eepro100_write_eeprom(eeprom_t * eeprom, uint8_t val)
+{
+ logout("write val=0x%02x\n", val);
+
+ /* mask unwriteable bits */
+ //~ val = SET_MASKED(val, 0x31, eeprom->value);
+
+ int eecs = ((val & EEPROM_CS) != 0);
+ int eesk = ((val & EEPROM_SK) != 0);
+ int eedi = ((val & EEPROM_DI) != 0);
+ eeprom93xx_write(eeprom, eecs, eesk, eedi);
+}
+
+static void eepro100_write_pointer(EEPRO100State * s, uint32_t val)
+{
+ s->pointer = le32_to_cpu(val);
+ logout("val=0x%08x\n", val);
+}
+
+/*****************************************************************************
+ *
+ * MDI emulation.
+ *
+ ****************************************************************************/
+
+#if defined(DEBUG_EEPRO100)
+static const char *mdi_op_name[] = {
+ "opcode 0",
+ "write",
+ "read",
+ "opcode 3"
+};
+
+static const char *mdi_reg_name[] = {
+ "Control",
+ "Status",
+ "PHY Identification (Word 1)",
+ "PHY Identification (Word 2)",
+ "Auto-Negotiation Advertisement",
+ "Auto-Negotiation Link Partner Ability",
+ "Auto-Negotiation Expansion"
+};
+#endif /* DEBUG_EEPRO100 */
+
+static uint32_t eepro100_read_mdi(EEPRO100State * s)
+{
+ uint32_t val;
+ memcpy(&val, &s->mem[0x10], sizeof(val));
+
+#ifdef DEBUG_EEPRO100
+ uint8_t raiseint = (val & BIT(29)) >> 29;
+ uint8_t opcode = (val & BITS(27, 26)) >> 26;
+ uint8_t phy = (val & BITS(25, 21)) >> 21;
+ uint8_t reg = (val & BITS(20, 16)) >> 16;
+ uint16_t data = (val & BITS(15, 0));
+#endif
+ /* Emulation takes no time to finish MDI transaction. */
+ val |= BIT(28);
+ TRACE(MDI, logout("val=0x%08x (int=%u, %s, phy=%u, %s, data=0x%04x\n",
+ val, raiseint, mdi_op_name[opcode], phy,
+ mdi_reg_name[reg], data));
+ return val;
+}
+
+//~ #define BITS(val, upper, lower) (val & ???)
+static void eepro100_write_mdi(EEPRO100State * s, uint32_t val)
+{
+ uint8_t raiseint = (val & BIT(29)) >> 29;
+ uint8_t opcode = (val & BITS(27, 26)) >> 26;
+ uint8_t phy = (val & BITS(25, 21)) >> 21;
+ uint8_t reg = (val & BITS(20, 16)) >> 16;
+ uint16_t data = (val & BITS(15, 0));
+ if (phy != 1) {
+ /* Unsupported PHY address. */
+ //~ logout("phy must be 1 but is %u\n", phy);
+ data = 0;
+ } else if (opcode != 1 && opcode != 2) {
+ /* Unsupported opcode. */
+ logout("opcode must be 1 or 2 but is %u\n", opcode);
+ data = 0;
+ } else if (reg > 6) {
+ /* Unsupported register. */
+ logout("register must be 0...6 but is %u\n", reg);
+ data = 0;
+ } else {
+ TRACE(MDI, logout("val=0x%08x (int=%u, %s, phy=%u, %s, data=0x%04x\n",
+ val, raiseint, mdi_op_name[opcode], phy,
+ mdi_reg_name[reg], data));
+ if (opcode == 1) {
+ /* MDI write */
+ switch (reg) {
+ case 0: /* Control Register */
+ if (data & 0x8000) {
+ /* Reset status and control registers to default. */
+ s->mdimem[0] = eepro100_mdi_default[0];
+ s->mdimem[1] = eepro100_mdi_default[1];
+ data = s->mdimem[reg];
+ } else {
+ /* Restart Auto Configuration = Normal Operation */
+ data &= ~0x0200;
+ }
+ break;
+ case 1: /* Status Register */
+ missing("not writable");
+ data = s->mdimem[reg];
+ break;
+ case 2: /* PHY Identification Register (Word 1) */
+ case 3: /* PHY Identification Register (Word 2) */
+ missing("not implemented");
+ break;
+ case 4: /* Auto-Negotiation Advertisement Register */
+ case 5: /* Auto-Negotiation Link Partner Ability Register */
+ break;
+ case 6: /* Auto-Negotiation Expansion Register */
+ default:
+ missing("not implemented");
+ }
+ s->mdimem[reg] = data;
+ } else if (opcode == 2) {
+ /* MDI read */
+ switch (reg) {
+ case 0: /* Control Register */
+ if (data & 0x8000) {
+ /* Reset status and control registers to default. */
+ s->mdimem[0] = eepro100_mdi_default[0];
+ s->mdimem[1] = eepro100_mdi_default[1];
+ }
+ break;
+ case 1: /* Status Register */
+ s->mdimem[reg] |= 0x0020;
+ break;
+ case 2: /* PHY Identification Register (Word 1) */
+ case 3: /* PHY Identification Register (Word 2) */
+ case 4: /* Auto-Negotiation Advertisement Register */
+ break;
+ case 5: /* Auto-Negotiation Link Partner Ability Register */
+ s->mdimem[reg] = 0x41fe;
+ break;
+ case 6: /* Auto-Negotiation Expansion Register */
+ s->mdimem[reg] = 0x0001;
+ break;
+ }
+ data = s->mdimem[reg];
+ }
+ /* Emulation takes no time to finish MDI transaction.
+ * Set MDI bit in SCB status register. */
+ s->mem[SCBAck] |= 0x08;
+ val |= BIT(28);
+ if (raiseint) {
+ eepro100_mdi_interrupt(s);
+ }
+ }
+ val = (val & 0xffff0000) + data;
+ memcpy(&s->mem[0x10], &val, sizeof(val));
+}
+
+/*****************************************************************************
+ *
+ * Port emulation.
+ *
+ ****************************************************************************/
+
+#define PORT_SOFTWARE_RESET 0
+#define PORT_SELFTEST 1
+#define PORT_SELECTIVE_RESET 2
+#define PORT_DUMP 3
+#define PORT_SELECTION_MASK 3
+
+typedef struct {
+ uint32_t st_sign; /* Self Test Signature */
+ uint32_t st_result; /* Self Test Results */
+} eepro100_selftest_t;
+
+static uint32_t eepro100_read_port(EEPRO100State * s)
+{
+ return 0;
+}
+
+static void eepro100_write_port(EEPRO100State * s, uint32_t val)
+{
+ val = le32_to_cpu(val);
+ uint32_t address = (val & ~PORT_SELECTION_MASK);
+ uint8_t selection = (val & PORT_SELECTION_MASK);
+ switch (selection) {
+ case PORT_SOFTWARE_RESET:
+ nic_reset(s);
+ break;
+ case PORT_SELFTEST:
+ logout("selftest address=0x%08x\n", address);
+ eepro100_selftest_t data;
+ cpu_physical_memory_read(address, (uint8_t *) & data, sizeof(data));
+ data.st_sign = 0xffffffff;
+ data.st_result = 0;
+ cpu_physical_memory_write(address, (uint8_t *) & data, sizeof(data));
+ break;
+ case PORT_SELECTIVE_RESET:
+ logout("selective reset, selftest address=0x%08x\n", address);
+ nic_selective_reset(s);
+ break;
+ default:
+ logout("val=0x%08x\n", val);
+ missing("unknown port selection");
+ }
+}
+
+/*****************************************************************************
+ *
+ * General hardware emulation.
+ *
+ ****************************************************************************/
+
+static uint8_t eepro100_read1(EEPRO100State * s, uint32_t addr)
+{
+ uint8_t val;
+ if (addr <= sizeof(s->mem) - sizeof(val)) {
+ memcpy(&val, &s->mem[addr], sizeof(val));
+ }
+
+ switch (addr) {
+ case SCBStatus:
+ //~ val = eepro100_read_status(s);
+ logout("addr=%s val=0x%02x\n", regname(addr), val);
+ break;
+ case SCBAck:
+ //~ val = eepro100_read_status(s);
+ logout("addr=%s val=0x%02x\n", regname(addr), val);
+ break;
+ case SCBCmd:
+ logout("addr=%s val=0x%02x\n", regname(addr), val);
+ //~ val = eepro100_read_command(s);
+ break;
+ case SCBIntmask:
+ logout("addr=%s val=0x%02x\n", regname(addr), val);
+ break;
+ case SCBPort + 3:
+ logout("addr=%s val=0x%02x\n", regname(addr), val);
+ break;
+ case SCBeeprom:
+ val = eepro100_read_eeprom(s);
+ break;
+ case 0x1b: /* PMDR (power management driver register) */
+ val = 0;
+ logout("addr=%s val=0x%02x\n", regname(addr), val);
+ break;
+ case 0x1d: /* general status register */
+ /* 100 Mbps full duplex, valid link */
+ val = 0x07;
+ logout("addr=General Status val=%02x\n", val);
+ break;
+ default:
+ logout("addr=%s val=0x%02x\n", regname(addr), val);
+ missing("unknown byte read");
+ }
+ return val;
+}
+
+static uint16_t eepro100_read2(EEPRO100State * s, uint32_t addr)
+{
+ uint16_t val;
+ if (addr <= sizeof(s->mem) - sizeof(val)) {
+ memcpy(&val, &s->mem[addr], sizeof(val));
+ }
+
+ logout("addr=%s val=0x%04x\n", regname(addr), val);
+
+ switch (addr) {
+ case SCBStatus:
+ //~ val = eepro100_read_status(s);
+ break;
+ case SCBeeprom:
+ val = eepro100_read_eeprom(s);
+ break;
+ default:
+ logout("addr=%s val=0x%04x\n", regname(addr), val);
+ missing("unknown word read");
+ }
+ return val;
+}
+
+static uint32_t eepro100_read4(EEPRO100State * s, uint32_t addr)
+{
+ uint32_t val;
+ if (addr <= sizeof(s->mem) - sizeof(val)) {
+ memcpy(&val, &s->mem[addr], sizeof(val));
+ }
+
+ switch (addr) {
+ case SCBStatus:
+ //~ val = eepro100_read_status(s);
+ logout("addr=%s val=0x%08x\n", regname(addr), val);
+ break;
+ case SCBPointer:
+ //~ val = eepro100_read_pointer(s);
+ logout("addr=%s val=0x%08x\n", regname(addr), val);
+ break;
+ case SCBPort:
+ val = eepro100_read_port(s);
+ logout("addr=%s val=0x%08x\n", regname(addr), val);
+ break;
+ case SCBCtrlMDI:
+ val = eepro100_read_mdi(s);
+ break;
+ default:
+ logout("addr=%s val=0x%08x\n", regname(addr), val);
+ missing("unknown longword read");
+ }
+ return val;
+}
+
+static void eepro100_write1(EEPRO100State * s, uint32_t addr, uint8_t val)
+{
+ if (addr <= sizeof(s->mem) - sizeof(val)) {
+ memcpy(&s->mem[addr], &val, sizeof(val));
+ }
+
+ logout("addr=%s val=0x%02x\n", regname(addr), val);
+
+ switch (addr) {
+ case SCBStatus:
+ //~ eepro100_write_status(s, val);
+ break;
+ case SCBAck:
+ eepro100_acknowledge(s);
+ break;
+ case SCBCmd:
+ eepro100_write_command(s, val);
+ break;
+ case SCBIntmask:
+ if (val & BIT(1)) {
+ eepro100_swi_interrupt(s);
+ }
+ eepro100_interrupt(s, 0);
+ break;
+ case SCBPort + 3:
+ logout("addr=%s val=0x%02x\n", regname(addr), val);
+ break;
+ case SCBeeprom:
+ eepro100_write_eeprom(s->eeprom, val);
+ break;
+ default:
+ logout("addr=%s val=0x%02x\n", regname(addr), val);
+ missing("unknown byte write");
+ }
+}
+
+static void eepro100_write2(EEPRO100State * s, uint32_t addr, uint16_t val)
+{
+ if (addr <= sizeof(s->mem) - sizeof(val)) {
+ memcpy(&s->mem[addr], &val, sizeof(val));
+ }
+
+ logout("addr=%s val=0x%04x\n", regname(addr), val);
+
+ switch (addr) {
+ case SCBStatus:
+ //~ eepro100_write_status(s, val);
+ eepro100_acknowledge(s);
+ break;
+ case SCBCmd:
+ eepro100_write_command(s, val);
+ eepro100_write1(s, SCBIntmask, val >> 8);
+ break;
+ case SCBeeprom:
+ eepro100_write_eeprom(s->eeprom, val);
+ break;
+ default:
+ logout("addr=%s val=0x%04x\n", regname(addr), val);
+ missing("unknown word write");
+ }
+}
+
+static void eepro100_write4(EEPRO100State * s, uint32_t addr, uint32_t val)
+{
+ if (addr <= sizeof(s->mem) - sizeof(val)) {
+ memcpy(&s->mem[addr], &val, sizeof(val));
+ }
+
+ switch (addr) {
+ case SCBPointer:
+ eepro100_write_pointer(s, val);
+ break;
+ case SCBPort:
+ logout("addr=%s val=0x%08x\n", regname(addr), val);
+ eepro100_write_port(s, val);
+ break;
+ case SCBCtrlMDI:
+ eepro100_write_mdi(s, val);
+ break;
+ default:
+ logout("addr=%s val=0x%08x\n", regname(addr), val);
+ missing("unknown longword write");
+ }
+}
+
+static uint32_t ioport_read1(void *opaque, uint32_t addr)
+{
+ EEPRO100State *s = opaque;
+ //~ logout("addr=%s\n", regname(addr));
+ return eepro100_read1(s, addr - s->region[1]);
+}
+
+static uint32_t ioport_read2(void *opaque, uint32_t addr)
+{
+ EEPRO100State *s = opaque;
+ return eepro100_read2(s, addr - s->region[1]);
+}
+
+static uint32_t ioport_read4(void *opaque, uint32_t addr)
+{
+ EEPRO100State *s = opaque;
+ return eepro100_read4(s, addr - s->region[1]);
+}
+
+static void ioport_write1(void *opaque, uint32_t addr, uint32_t val)
+{
+ EEPRO100State *s = opaque;
+ //~ logout("addr=%s val=0x%02x\n", regname(addr), val);
+ eepro100_write1(s, addr - s->region[1], val);
+}
+
+static void ioport_write2(void *opaque, uint32_t addr, uint32_t val)
+{
+ EEPRO100State *s = opaque;
+ eepro100_write2(s, addr - s->region[1], val);
+}
+
+static void ioport_write4(void *opaque, uint32_t addr, uint32_t val)
+{
+ EEPRO100State *s = opaque;
+ eepro100_write4(s, addr - s->region[1], val);
+}
+
+/***********************************************************/
+/* PCI EEPRO100 definitions */
+
+typedef struct PCIEEPRO100State {
+ PCIDevice dev;
+ EEPRO100State eepro100;
+} PCIEEPRO100State;
+
+static void pci_map(PCIDevice * pci_dev, int region_num,
+ uint32_t addr, uint32_t size, int type)
+{
+ PCIEEPRO100State *d = (PCIEEPRO100State *) pci_dev;
+ EEPRO100State *s = &d->eepro100;
+
+ logout("region %d, addr=0x%08x, size=0x%08x, type=%d\n",
+ region_num, addr, size, type);
+
+ assert(region_num == 1);
+ register_ioport_write(addr, size, 1, ioport_write1, s);
+ register_ioport_read(addr, size, 1, ioport_read1, s);
+ register_ioport_write(addr, size, 2, ioport_write2, s);
+ register_ioport_read(addr, size, 2, ioport_read2, s);
+ register_ioport_write(addr, size, 4, ioport_write4, s);
+ register_ioport_read(addr, size, 4, ioport_read4, s);
+
+ s->region[region_num] = addr;
+}
+
+static void pci_mmio_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+ EEPRO100State *s = opaque;
+ addr -= s->region[0];
+ //~ logout("addr=%s val=0x%02x\n", regname(addr), val);
+ eepro100_write1(s, addr, val);
+}
+
+static void pci_mmio_writew(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+ EEPRO100State *s = opaque;
+ addr -= s->region[0];
+ //~ logout("addr=%s val=0x%02x\n", regname(addr), val);
+ eepro100_write2(s, addr, val);
+}
+
+static void pci_mmio_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
+{
+ EEPRO100State *s = opaque;
+ addr -= s->region[0];
+ //~ logout("addr=%s val=0x%02x\n", regname(addr), val);
+ eepro100_write4(s, addr, val);
+}
+
+static uint32_t pci_mmio_readb(void *opaque, target_phys_addr_t addr)
+{
+ EEPRO100State *s = opaque;
+ addr -= s->region[0];
+ //~ logout("addr=%s\n", regname(addr));
+ return eepro100_read1(s, addr);
+}
+
+static uint32_t pci_mmio_readw(void *opaque, target_phys_addr_t addr)
+{
+ EEPRO100State *s = opaque;
+ addr -= s->region[0];
+ //~ logout("addr=%s\n", regname(addr));
+ return eepro100_read2(s, addr);
+}
+
+static uint32_t pci_mmio_readl(void *opaque, target_phys_addr_t addr)
+{
+ EEPRO100State *s = opaque;
+ addr -= s->region[0];
+ //~ logout("addr=%s\n", regname(addr));
+ return eepro100_read4(s, addr);
+}
+
+static CPUWriteMemoryFunc *pci_mmio_write[] = {
+ pci_mmio_writeb,
+ pci_mmio_writew,
+ pci_mmio_writel
+};
+
+static CPUReadMemoryFunc *pci_mmio_read[] = {
+ pci_mmio_readb,
+ pci_mmio_readw,
+ pci_mmio_readl
+};
+
+static void pci_mmio_map(PCIDevice * pci_dev, int region_num,
+ uint32_t addr, uint32_t size, int type)
+{
+ PCIEEPRO100State *d = (PCIEEPRO100State *) pci_dev;
+
+ logout("region %d, addr=0x%08x, size=0x%08x, type=%d\n",
+ region_num, addr, size, type);
+
+ if (region_num == 0) {
+ /* Map control / status registers. */
+ cpu_register_physical_memory(addr, size, d->eepro100.mmio_index);
+ d->eepro100.region[region_num] = addr;
+ }
+}
+
+static int nic_can_receive(void *opaque)
+{
+ EEPRO100State *s = opaque;
+ logout("%p\n", s);
+ return get_ru_state(s) == ru_ready;
+ //~ return !eepro100_buffer_full(s);
+}
+
+#define MIN_BUF_SIZE 60
+
+static void nic_receive(void *opaque, const uint8_t * buf, int size)
+{
+ /* TODO:
+ * - Magic packets should set bit 30 in power management driver register.
+ * - Interesting packets should set bit 29 in power management driver register.
+ */
+ EEPRO100State *s = opaque;
+ uint16_t rfd_status = 0xa000;
+ static const uint8_t broadcast_macaddr[6] =
+ { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+ /* TODO: check multiple IA bit. */
+ assert(!(s->configuration[20] & BIT(6)));
+
+ if (s->configuration[8] & 0x80) {
+ /* CSMA is disabled. */
+ logout("%p received while CSMA is disabled\n", s);
+ return;
+ } else if (size < 64 && (s->configuration[7] & 1)) {
+ /* Short frame and configuration byte 7/0 (discard short receive) set:
+ * Short frame is discarded */
+ logout("%p received short frame (%d byte)\n", s, size);
+ s->statistics.rx_short_frame_errors++;
+ //~ return;
+ } else if ((size > MAX_ETH_FRAME_SIZE + 4) && !(s->configuration[18] & 8)) {
+ /* Long frame and configuration byte 18/3 (long receive ok) not set:
+ * Long frames are discarded. */
+ logout("%p received long frame (%d byte), ignored\n", s, size);
+ return;
+ } else if (memcmp(buf, s->macaddr, 6) == 0) { // !!!
+ /* Frame matches individual address. */
+ /* TODO: check configuration byte 15/4 (ignore U/L). */
+ logout("%p received frame for me, len=%d\n", s, size);
+ } else if (memcmp(buf, broadcast_macaddr, 6) == 0) {
+ /* Broadcast frame. */
+ logout("%p received broadcast, len=%d\n", s, size);
+ rfd_status |= 0x0002;
+ } else if (buf[0] & 0x01) { // !!!
+ /* Multicast frame. */
+ logout("%p received multicast, len=%d\n", s, size);
+ /* TODO: check multicast all bit. */
+ assert(!(s->configuration[21] & BIT(3)));
+ int mcast_idx = compute_mcast_idx(buf);
+ if (!(s->mult[mcast_idx >> 3] & (1 << (mcast_idx & 7)))) {
+ return;
+ }
+ rfd_status |= 0x0002;
+ } else if (s->configuration[15] & 1) {
+ /* Promiscuous: receive all. */
+ logout("%p received frame in promiscuous mode, len=%d\n", s, size);
+ rfd_status |= 0x0004;
+ } else {
+ logout("%p received frame, ignored, len=%d,%s\n", s, size,
+ nic_dump(buf, size));
+ return;
+ }
+
+ if (get_ru_state(s) != ru_ready) {
+ /* No ressources available. */
+ logout("no ressources, state=%u\n", get_ru_state(s));
+ s->statistics.rx_resource_errors++;
+ //~ assert(!"no ressources");
+ return;
+ }
+ //~ !!!
+//~ $3 = {status = 0x0, command = 0xc000, link = 0x2d220, rx_buf_addr = 0x207dc, count = 0x0, size = 0x5f8, packet = {0x0 <repeats 1518 times>}}
+ eepro100_rx_t rx;
+ cpu_physical_memory_read(s->ru_base + s->ru_offset, (uint8_t *) & rx,
+ offsetof(eepro100_rx_t, packet));
+ uint16_t rfd_command = le16_to_cpu(rx.command);
+ uint16_t rfd_size = le16_to_cpu(rx.size);
+ assert(size <= rfd_size);
+ if (size < 64) {
+ rfd_status |= 0x0080;
+ }
+ logout("command 0x%04x, link 0x%08x, addr 0x%08x, size %u\n", rfd_command,
+ rx.link, rx.rx_buf_addr, rfd_size);
+ stw_phys(s->ru_base + s->ru_offset + offsetof(eepro100_rx_t, status),
+ rfd_status);
+ stw_phys(s->ru_base + s->ru_offset + offsetof(eepro100_rx_t, count), size);
+ /* Early receive interrupt not supported. */
+ //~ eepro100_er_interrupt(s);
+ /* Receive CRC Transfer not supported. */
+ assert(!(s->configuration[18] & 4));
+ /* TODO: check stripping enable bit. */
+ //~ assert(!(s->configuration[17] & 1));
+ cpu_physical_memory_write(s->ru_base + s->ru_offset +
+ offsetof(eepro100_rx_t, packet), buf, size);
+ s->statistics.rx_good_frames++;
+ eepro100_fr_interrupt(s);
+ s->ru_offset = le32_to_cpu(rx.link);
+ if (rfd_command & 0x8000) {
+ /* EL bit is set, so this was the last frame. */
+ assert(0);
+ }
+ if (rfd_command & 0x4000) {
+ /* S bit is set. */
+ set_ru_state(s, ru_suspended);
+ }
+}
+
+static int nic_load(QEMUFile * f, void *opaque, int version_id)
+{
+ EEPRO100State *s = (EEPRO100State *) opaque;
+ int ret;
+
+ missing("NIC load");
+
+ if (version_id > 3)
+ return -EINVAL;
+
+ if (s->pci_dev && version_id >= 3) {
+ ret = pci_device_load(s->pci_dev, f);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (version_id >= 2) {
+ qemu_get_8s(f, &s->rxcr);
+ } else {
+ s->rxcr = 0x0c;
+ }
+
+ qemu_get_8s(f, &s->cmd);
+ qemu_get_be32s(f, &s->start);
+ qemu_get_be32s(f, &s->stop);
+ qemu_get_8s(f, &s->boundary);
+ qemu_get_8s(f, &s->tsr);
+ qemu_get_8s(f, &s->tpsr);
+ qemu_get_be16s(f, &s->tcnt);
+ qemu_get_be16s(f, &s->rcnt);
+ qemu_get_be32s(f, &s->rsar);
+ qemu_get_8s(f, &s->rsr);
+ qemu_get_8s(f, &s->isr);
+ qemu_get_8s(f, &s->dcfg);
+ qemu_get_8s(f, &s->imr);
+ qemu_get_buffer(f, s->phys, 6);
+ qemu_get_8s(f, &s->curpag);
+ qemu_get_buffer(f, s->mult, 8);
+ qemu_get_buffer(f, s->mem, sizeof(s->mem));
+
+ return 0;
+}
+
+static void nic_save(QEMUFile * f, void *opaque)
+{
+ EEPRO100State *s = (EEPRO100State *) opaque;
+
+ missing("NIC save");
+
+ if (s->pci_dev)
+ pci_device_save(s->pci_dev, f);
+
+ qemu_put_8s(f, &s->rxcr);
+
+ qemu_put_8s(f, &s->cmd);
+ qemu_put_be32s(f, &s->start);
+ qemu_put_be32s(f, &s->stop);
+ qemu_put_8s(f, &s->boundary);
+ qemu_put_8s(f, &s->tsr);
+ qemu_put_8s(f, &s->tpsr);
+ qemu_put_be16s(f, &s->tcnt);
+ qemu_put_be16s(f, &s->rcnt);
+ qemu_put_be32s(f, &s->rsar);
+ qemu_put_8s(f, &s->rsr);
+ qemu_put_8s(f, &s->isr);
+ qemu_put_8s(f, &s->dcfg);
+ qemu_put_8s(f, &s->imr);
+ qemu_put_buffer(f, s->phys, 6);
+ qemu_put_8s(f, &s->curpag);
+ qemu_put_buffer(f, s->mult, 8);
+ qemu_put_buffer(f, s->mem, sizeof(s->mem));
+}
+
+static void nic_init(PCIBus * bus, NICInfo * nd,
+ const char *name, uint32_t device)
+{
+ PCIEEPRO100State *d;
+ EEPRO100State *s;
+
+ logout("\n");
+
+ d = (PCIEEPRO100State *) pci_register_device(bus, name,
+ sizeof(PCIEEPRO100State), -1,
+ NULL, NULL);
+
+ s = &d->eepro100;
+ s->device = device;
+ s->pci_dev = &d->dev;
+
+ pci_reset(s);
+
+ /* Add 64 * 2 EEPROM. i82557 and i82558 support a 64 word EEPROM,
+ * i82559 and later support 64 or 256 word EEPROM. */
+ s->eeprom = eeprom93xx_new(EEPROM_SIZE);
+
+ /* Handler for memory-mapped I/O */
+ d->eepro100.mmio_index =
+ cpu_register_io_memory(0, pci_mmio_read, pci_mmio_write, s);
+
+ pci_register_io_region(&d->dev, 0, PCI_MEM_SIZE,
+ PCI_ADDRESS_SPACE_MEM |
+ PCI_ADDRESS_SPACE_MEM_PREFETCH, pci_mmio_map);
+ pci_register_io_region(&d->dev, 1, PCI_IO_SIZE, PCI_ADDRESS_SPACE_IO,
+ pci_map);
+ pci_register_io_region(&d->dev, 2, PCI_FLASH_SIZE, PCI_ADDRESS_SPACE_MEM,
+ pci_mmio_map);
+
+ memcpy(s->macaddr, nd->macaddr, 6);
+ logout("macaddr: %s\n", nic_dump(&s->macaddr[0], 6));
+ assert(s->region[1] == 0);
+
+ nic_reset(s);
+
+ s->vc = qemu_new_vlan_client(nd->vlan, nic_receive, nic_can_receive, s);
+
+ snprintf(s->vc->info_str, sizeof(s->vc->info_str),
+ "eepro100 pci macaddr=%02x:%02x:%02x:%02x:%02x:%02x",
+ s->macaddr[0],
+ s->macaddr[1],
+ s->macaddr[2], s->macaddr[3], s->macaddr[4], s->macaddr[5]);
+
+ qemu_register_reset(nic_reset, s);
+
+ /* XXX: instance number ? */
+ register_savevm(name, 0, 3, nic_save, nic_load, s);
+}
+
+void pci_i82551_init(PCIBus * bus, NICInfo * nd, int devfn)
+{
+ nic_init(bus, nd, "i82551", i82551);
+ //~ uint8_t *pci_conf = d->dev.config;
+}
+
+void pci_i82557b_init(PCIBus * bus, NICInfo * nd, int devfn)
+{
+ nic_init(bus, nd, "i82557b", i82557B);
+}
+
+void pci_i82559er_init(PCIBus * bus, NICInfo * nd, int devfn)
+{
+ nic_init(bus, nd, "i82559er", i82559ER);
+}
+
+/* eof */
diff --git a/hw/eeprom93xx.c b/hw/eeprom93xx.c
new file mode 100644
index 0000000000..14f0189143
--- /dev/null
+++ b/hw/eeprom93xx.c
@@ -0,0 +1,312 @@
+/*
+ * QEMU EEPROM 93xx emulation
+ *
+ * Copyright (c) 2006-2007 Stefan Weil
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Emulation for serial EEPROMs:
+ * NMC93C06 256-Bit (16 x 16)
+ * NMC93C46 1024-Bit (64 x 16)
+ * NMC93C56 2028 Bit (128 x 16)
+ * NMC93C66 4096 Bit (256 x 16)
+ * Compatible devices include FM93C46 and others.
+ *
+ * Other drivers use these interface functions:
+ * eeprom93xx_new - add a new EEPROM (with 16, 64 or 256 words)
+ * eeprom93xx_free - destroy EEPROM
+ * eeprom93xx_read - read data from the EEPROM
+ * eeprom93xx_write - write data to the EEPROM
+ * eeprom93xx_data - get EEPROM data array for external manipulation
+ *
+ * Todo list:
+ * - No emulation of EEPROM timings.
+ */
+
+#include <assert.h>
+#include "eeprom93xx.h"
+
+/* Debug EEPROM emulation. */
+//~ #define DEBUG_EEPROM
+
+#ifdef DEBUG_EEPROM
+#define logout(fmt, args...) fprintf(stderr, "EEPROM\t%-24s" fmt, __func__, ##args)
+#else
+#define logout(fmt, args...) ((void)0)
+#endif
+
+static int eeprom_instance = 0;
+static const int eeprom_version = 20061112;
+
+#if 0
+typedef enum {
+ eeprom_read = 0x80, /* read register xx */
+ eeprom_write = 0x40, /* write register xx */
+ eeprom_erase = 0xc0, /* erase register xx */
+ eeprom_ewen = 0x30, /* erase / write enable */
+ eeprom_ewds = 0x00, /* erase / write disable */
+ eeprom_eral = 0x20, /* erase all registers */
+ eeprom_wral = 0x10, /* write all registers */
+ eeprom_amask = 0x0f,
+ eeprom_imask = 0xf0
+} eeprom_instruction_t;
+#endif
+
+#ifdef DEBUG_EEPROM
+static const char *opstring[] = {
+ "extended", "write", "read", "erase"
+};
+#endif
+
+struct _eeprom_t {
+ uint8_t tick;
+ uint8_t address;
+ uint8_t command;
+ uint8_t writeable;
+
+ uint8_t eecs;
+ uint8_t eesk;
+ uint8_t eedo;
+
+ uint8_t addrbits;
+ uint8_t size;
+ uint16_t data;
+ uint16_t contents[0];
+};
+
+/* Code for saving and restoring of EEPROM state. */
+
+static void eeprom_save(QEMUFile *f, void *opaque)
+{
+ /* Save EEPROM data. */
+ unsigned address;
+ eeprom_t *eeprom = (eeprom_t *)opaque;
+ qemu_put_buffer(f, (uint8_t *)eeprom, sizeof(*eeprom) - 2);
+ qemu_put_be16(f, eeprom->data);
+ for (address = 0; address < eeprom->size; address++) {
+ qemu_put_be16(f, eeprom->contents[address]);
+ }
+}
+
+static int eeprom_load(QEMUFile *f, void *opaque, int version_id)
+{
+ /* Load EEPROM data from saved data if version and EEPROM size
+ of data and current EEPROM are identical. */
+ eeprom_t *eeprom = (eeprom_t *)opaque;
+ int result = -EINVAL;
+ if (version_id == eeprom_version) {
+ unsigned address;
+ uint8_t size = eeprom->size;
+ qemu_get_buffer(f, (uint8_t *)eeprom, sizeof(*eeprom) - 2);
+ if (eeprom->size == size) {
+ eeprom->data = qemu_get_be16(f);
+ for (address = 0; address < eeprom->size; address++) {
+ eeprom->contents[address] = qemu_get_be16(f);
+ }
+ result = 0;
+ }
+ }
+ return result;
+}
+
+void eeprom93xx_write(eeprom_t *eeprom, int eecs, int eesk, int eedi)
+{
+ uint8_t tick = eeprom->tick;
+ uint8_t eedo = eeprom->eedo;
+ uint16_t address = eeprom->address;
+ uint8_t command = eeprom->command;
+
+ logout("CS=%u SK=%u DI=%u DO=%u, tick = %u\n",
+ eecs, eesk, eedi, eedo, tick);
+
+ if (! eeprom->eecs && eecs) {
+ /* Start chip select cycle. */
+ logout("Cycle start, waiting for 1st start bit (0)\n");
+ tick = 0;
+ command = 0x0;
+ address = 0x0;
+ } else if (eeprom->eecs && ! eecs) {
+ /* End chip select cycle. This triggers write / erase. */
+ if (eeprom->writeable) {
+ uint8_t subcommand = address >> (eeprom->addrbits - 2);
+ if (command == 0 && subcommand == 2) {
+ /* Erase all. */
+ for (address = 0; address < eeprom->size; address++) {
+ eeprom->contents[address] = 0xffff;
+ }
+ } else if (command == 3) {
+ /* Erase word. */
+ eeprom->contents[address] = 0xffff;
+ } else if (tick >= 2 + 2 + eeprom->addrbits + 16) {
+ if (command == 1) {
+ /* Write word. */
+ eeprom->contents[address] &= eeprom->data;
+ } else if (command == 0 && subcommand == 1) {
+ /* Write all. */
+ for (address = 0; address < eeprom->size; address++) {
+ eeprom->contents[address] &= eeprom->data;
+ }
+ }
+ }
+ }
+ /* Output DO is tristate, read results in 1. */
+ eedo = 1;
+ } else if (eecs && ! eeprom->eesk && eesk) {
+ /* Raising edge of clock shifts data in. */
+ if (tick == 0) {
+ /* Wait for 1st start bit. */
+ if (eedi == 0) {
+ logout("Got correct 1st start bit, waiting for 2nd start bit (1)\n");
+ tick++;
+ } else {
+ logout("wrong 1st start bit (is 1, should be 0)\n");
+ tick = 2;
+ //~ assert(!"wrong start bit");
+ }
+ } else if (tick == 1) {
+ /* Wait for 2nd start bit. */
+ if (eedi != 0) {
+ logout("Got correct 2nd start bit, getting command + address\n");
+ tick++;
+ } else {
+ logout("1st start bit is longer than needed\n");
+ }
+ } else if (tick < 2 + 2) {
+ /* Got 2 start bits, transfer 2 opcode bits. */
+ tick++;
+ command <<= 1;
+ if (eedi) {
+ command += 1;
+ }
+ } else if (tick < 2 + 2 + eeprom->addrbits) {
+ /* Got 2 start bits and 2 opcode bits, transfer all address bits. */
+ tick++;
+ address = ((address << 1) | eedi);
+ if (tick == 2 + 2 + eeprom->addrbits) {
+ logout("%s command, address = 0x%02x (value 0x%04x)\n",
+ opstring[command], address, eeprom->contents[address]);
+ if (command == 2) {
+ eedo = 0;
+ }
+ address = address % eeprom->size;
+ if (command == 0) {
+ /* Command code in upper 2 bits of address. */
+ switch (address >> (eeprom->addrbits - 2)) {
+ case 0:
+ logout("write disable command\n");
+ eeprom->writeable = 0;
+ break;
+ case 1:
+ logout("write all command\n");
+ break;
+ case 2:
+ logout("erase all command\n");
+ break;
+ case 3:
+ logout("write enable command\n");
+ eeprom->writeable = 1;
+ break;
+ }
+ } else {
+ /* Read, write or erase word. */
+ eeprom->data = eeprom->contents[address];
+ }
+ }
+ } else if (tick < 2 + 2 + eeprom->addrbits + 16) {
+ /* Transfer 16 data bits. */
+ tick++;
+ if (command == 2) {
+ /* Read word. */
+ eedo = ((eeprom->data & 0x8000) != 0);
+ }
+ eeprom->data <<= 1;
+ eeprom->data += eedi;
+ } else {
+ logout("additional unneeded tick, not processed\n");
+ }
+ }
+ /* Save status of EEPROM. */
+ eeprom->tick = tick;
+ eeprom->eecs = eecs;
+ eeprom->eesk = eesk;
+ eeprom->eedo = eedo;
+ eeprom->address = address;
+ eeprom->command = command;
+}
+
+uint16_t eeprom93xx_read(eeprom_t *eeprom)
+{
+ /* Return status of pin DO (0 or 1). */
+ logout("CS=%u DO=%u\n", eeprom->eecs, eeprom->eedo);
+ return (eeprom->eedo);
+}
+
+#if 0
+void eeprom93xx_reset(eeprom_t *eeprom)
+{
+ /* prepare eeprom */
+ logout("eeprom = 0x%p\n", eeprom);
+ eeprom->tick = 0;
+ eeprom->command = 0;
+}
+#endif
+
+eeprom_t *eeprom93xx_new(uint16_t nwords)
+{
+ /* Add a new EEPROM (with 16, 64 or 256 words). */
+ eeprom_t *eeprom;
+ uint8_t addrbits;
+
+ switch (nwords) {
+ case 16:
+ case 64:
+ addrbits = 6;
+ break;
+ case 128:
+ case 256:
+ addrbits = 8;
+ break;
+ default:
+ assert(!"Unsupported EEPROM size, fallback to 64 words!");
+ nwords = 64;
+ addrbits = 6;
+ }
+
+ eeprom = (eeprom_t *)qemu_mallocz(sizeof(*eeprom) + nwords * 2);
+ eeprom->size = nwords;
+ eeprom->addrbits = addrbits;
+ /* Output DO is tristate, read results in 1. */
+ eeprom->eedo = 1;
+ logout("eeprom = 0x%p, nwords = %u\n", eeprom, nwords);
+ register_savevm("eeprom", eeprom_instance, eeprom_version,
+ eeprom_save, eeprom_load, eeprom);
+ return eeprom;
+}
+
+void eeprom93xx_free(eeprom_t *eeprom)
+{
+ /* Destroy EEPROM. */
+ logout("eeprom = 0x%p\n", eeprom);
+ qemu_free(eeprom);
+}
+
+uint16_t *eeprom93xx_data(eeprom_t *eeprom)
+{
+ /* Get EEPROM data array. */
+ return &eeprom->contents[0];
+}
+
+/* eof */
diff --git a/hw/eeprom93xx.h b/hw/eeprom93xx.h
new file mode 100644
index 0000000000..fde4912e86
--- /dev/null
+++ b/hw/eeprom93xx.h
@@ -0,0 +1,43 @@
+/*
+ * QEMU EEPROM 93xx emulation
+ *
+ * Copyright (c) 2006-2007 Stefan Weil
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef EEPROM93XX_H
+#define EEPROM93XX_H
+
+#include "vl.h"
+
+typedef struct _eeprom_t eeprom_t;
+
+/* Create a new EEPROM with (nwords * 2) bytes. */
+eeprom_t *eeprom93xx_new(uint16_t nwords);
+
+/* Destroy an existing EEPROM. */
+void eeprom93xx_free(eeprom_t *eeprom);
+
+/* Read from the EEPROM. */
+uint16_t eeprom93xx_read(eeprom_t *eeprom);
+
+/* Write to the EEPROM. */
+void eeprom93xx_write(eeprom_t *eeprom, int eecs, int eesk, int eedi);
+
+/* Get EEPROM data array. */
+uint16_t *eeprom93xx_data(eeprom_t *eeprom);
+
+#endif /* EEPROM93XX_H */
diff --git a/hw/pci.c b/hw/pci.c
index eeaef9e83d..4d9eb03299 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -548,6 +548,12 @@ void pci_nic_init(PCIBus *bus, NICInfo *nd, int devfn)
{
if (strcmp(nd->model, "ne2k_pci") == 0) {
pci_ne2000_init(bus, nd, devfn);
+ } else if (strcmp(nd->model, "i82551") == 0) {
+ pci_i82551_init(bus, nd, devfn);
+ } else if (strcmp(nd->model, "i82557b") == 0) {
+ pci_i82557b_init(bus, nd, devfn);
+ } else if (strcmp(nd->model, "i82559er") == 0) {
+ pci_i82559er_init(bus, nd, devfn);
} else if (strcmp(nd->model, "rtl8139") == 0) {
pci_rtl8139_init(bus, nd, devfn);
} else if (strcmp(nd->model, "pcnet") == 0) {
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-11 22:35:46 +0000