aboutsummaryrefslogtreecommitdiff
path: root/hw/nseries.c
diff options
context:
space:
mode:
Diffstat (limited to 'hw/nseries.c')
-rw-r--r--hw/nseries.c72
1 files changed, 36 insertions, 36 deletions
diff --git a/hw/nseries.c b/hw/nseries.c
index b8c6a29227..b199cb9ce7 100644
--- a/hw/nseries.c
+++ b/hw/nseries.c
@@ -37,7 +37,7 @@
/* Nokia N8x0 support */
struct n800_s {
- struct omap_mpu_state_s *cpu;
+ struct omap_mpu_state_s *mpu;
struct rfbi_chip_s blizzard;
struct {
@@ -135,10 +135,10 @@ static void n800_mmc_cs_cb(void *opaque, int line, int level)
static void n8x0_gpio_setup(struct n800_s *s)
{
- qemu_irq *mmc_cs = qemu_allocate_irqs(n800_mmc_cs_cb, s->cpu->mmc, 1);
- qdev_connect_gpio_out(s->cpu->gpio, N8X0_MMC_CS_GPIO, mmc_cs[0]);
+ qemu_irq *mmc_cs = qemu_allocate_irqs(n800_mmc_cs_cb, s->mpu->mmc, 1);
+ qdev_connect_gpio_out(s->mpu->gpio, N8X0_MMC_CS_GPIO, mmc_cs[0]);
- qemu_irq_lower(qdev_get_gpio_in(s->cpu->gpio, N800_BAT_COVER_GPIO));
+ qemu_irq_lower(qdev_get_gpio_in(s->mpu->gpio, N800_BAT_COVER_GPIO));
}
#define MAEMO_CAL_HEADER(...) \
@@ -179,8 +179,8 @@ static void n8x0_nand_setup(struct n800_s *s)
}
qdev_init_nofail(s->nand);
sysbus_connect_irq(sysbus_from_qdev(s->nand), 0,
- qdev_get_gpio_in(s->cpu->gpio, N8X0_ONENAND_GPIO));
- omap_gpmc_attach(s->cpu->gpmc, N8X0_ONENAND_CS,
+ qdev_get_gpio_in(s->mpu->gpio, N8X0_ONENAND_GPIO));
+ omap_gpmc_attach(s->mpu->gpmc, N8X0_ONENAND_CS,
sysbus_mmio_get_region(sysbus_from_qdev(s->nand), 0));
otp_region = onenand_raw_otp(s->nand);
@@ -192,13 +192,13 @@ static void n8x0_nand_setup(struct n800_s *s)
static void n8x0_i2c_setup(struct n800_s *s)
{
DeviceState *dev;
- qemu_irq tmp_irq = qdev_get_gpio_in(s->cpu->gpio, N8X0_TMP105_GPIO);
- i2c_bus *i2c = omap_i2c_bus(s->cpu->i2c[0]);
+ qemu_irq tmp_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TMP105_GPIO);
+ i2c_bus *i2c = omap_i2c_bus(s->mpu->i2c[0]);
/* Attach a menelaus PM chip */
dev = i2c_create_slave(i2c, "twl92230", N8X0_MENELAUS_ADDR);
qdev_connect_gpio_out(dev, 3,
- qdev_get_gpio_in(s->cpu->ih[0],
+ qdev_get_gpio_in(s->mpu->ih[0],
OMAP_INT_24XX_SYS_NIRQ));
qemu_system_powerdown = qdev_get_gpio_in(dev, 3);
@@ -263,8 +263,8 @@ static void n800_tsc_kbd_setup(struct n800_s *s)
/* XXX: are the three pins inverted inside the chip between the
* tsc and the cpu (N4111)? */
qemu_irq penirq = NULL; /* NC */
- qemu_irq kbirq = qdev_get_gpio_in(s->cpu->gpio, N800_TSC_KP_IRQ_GPIO);
- qemu_irq dav = qdev_get_gpio_in(s->cpu->gpio, N800_TSC_TS_GPIO);
+ qemu_irq kbirq = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_KP_IRQ_GPIO);
+ qemu_irq dav = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_TS_GPIO);
s->ts.chip = tsc2301_init(penirq, kbirq, dav);
s->ts.opaque = s->ts.chip->opaque;
@@ -283,7 +283,7 @@ static void n800_tsc_kbd_setup(struct n800_s *s)
static void n810_tsc_setup(struct n800_s *s)
{
- qemu_irq pintdav = qdev_get_gpio_in(s->cpu->gpio, N810_TSC_TS_GPIO);
+ qemu_irq pintdav = qdev_get_gpio_in(s->mpu->gpio, N810_TSC_TS_GPIO);
s->ts.opaque = tsc2005_init(pintdav);
s->ts.txrx = tsc2005_txrx;
@@ -375,7 +375,7 @@ static int n810_keys[0x80] = {
static void n810_kbd_setup(struct n800_s *s)
{
- qemu_irq kbd_irq = qdev_get_gpio_in(s->cpu->gpio, N810_KEYBOARD_GPIO);
+ qemu_irq kbd_irq = qdev_get_gpio_in(s->mpu->gpio, N810_KEYBOARD_GPIO);
int i;
for (i = 0; i < 0x80; i ++)
@@ -388,7 +388,7 @@ static void n810_kbd_setup(struct n800_s *s)
/* Attach the LM8322 keyboard to the I2C bus,
* should happen in n8x0_i2c_setup and s->kbd be initialised here. */
- s->kbd = i2c_create_slave(omap_i2c_bus(s->cpu->i2c[0]),
+ s->kbd = i2c_create_slave(omap_i2c_bus(s->mpu->i2c[0]),
"lm8323", N810_LM8323_ADDR);
qdev_connect_gpio_out(s->kbd, 0, kbd_irq);
}
@@ -679,8 +679,8 @@ static void n8x0_spi_setup(struct n800_s *s)
void *tsc = s->ts.opaque;
void *mipid = mipid_init();
- omap_mcspi_attach(s->cpu->mcspi[0], s->ts.txrx, tsc, 0);
- omap_mcspi_attach(s->cpu->mcspi[0], mipid_txrx, mipid, 1);
+ omap_mcspi_attach(s->mpu->mcspi[0], s->ts.txrx, tsc, 0);
+ omap_mcspi_attach(s->mpu->mcspi[0], mipid_txrx, mipid, 1);
}
/* This task is normally performed by the bootloader. If we're loading
@@ -735,20 +735,20 @@ static void n8x0_dss_setup(struct n800_s *s)
s->blizzard.write = s1d13745_write;
s->blizzard.read = s1d13745_read;
- omap_rfbi_attach(s->cpu->dss, 0, &s->blizzard);
+ omap_rfbi_attach(s->mpu->dss, 0, &s->blizzard);
}
static void n8x0_cbus_setup(struct n800_s *s)
{
- qemu_irq dat_out = qdev_get_gpio_in(s->cpu->gpio, N8X0_CBUS_DAT_GPIO);
- qemu_irq retu_irq = qdev_get_gpio_in(s->cpu->gpio, N8X0_RETU_GPIO);
- qemu_irq tahvo_irq = qdev_get_gpio_in(s->cpu->gpio, N8X0_TAHVO_GPIO);
+ qemu_irq dat_out = qdev_get_gpio_in(s->mpu->gpio, N8X0_CBUS_DAT_GPIO);
+ qemu_irq retu_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_RETU_GPIO);
+ qemu_irq tahvo_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TAHVO_GPIO);
CBus *cbus = cbus_init(dat_out);
- qdev_connect_gpio_out(s->cpu->gpio, N8X0_CBUS_CLK_GPIO, cbus->clk);
- qdev_connect_gpio_out(s->cpu->gpio, N8X0_CBUS_DAT_GPIO, cbus->dat);
- qdev_connect_gpio_out(s->cpu->gpio, N8X0_CBUS_SEL_GPIO, cbus->sel);
+ qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_CLK_GPIO, cbus->clk);
+ qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_DAT_GPIO, cbus->dat);
+ qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_SEL_GPIO, cbus->sel);
cbus_attach(cbus, s->retu = retu_init(retu_irq, 1));
cbus_attach(cbus, s->tahvo = tahvo_init(tahvo_irq, 1));
@@ -757,14 +757,14 @@ static void n8x0_cbus_setup(struct n800_s *s)
static void n8x0_uart_setup(struct n800_s *s)
{
CharDriverState *radio = uart_hci_init(
- qdev_get_gpio_in(s->cpu->gpio, N8X0_BT_HOST_WKUP_GPIO));
+ qdev_get_gpio_in(s->mpu->gpio, N8X0_BT_HOST_WKUP_GPIO));
- qdev_connect_gpio_out(s->cpu->gpio, N8X0_BT_RESET_GPIO,
+ qdev_connect_gpio_out(s->mpu->gpio, N8X0_BT_RESET_GPIO,
csrhci_pins_get(radio)[csrhci_pin_reset]);
- qdev_connect_gpio_out(s->cpu->gpio, N8X0_BT_WKUP_GPIO,
+ qdev_connect_gpio_out(s->mpu->gpio, N8X0_BT_WKUP_GPIO,
csrhci_pins_get(radio)[csrhci_pin_wakeup]);
- omap_uart_attach(s->cpu->uart[BT_UART], radio);
+ omap_uart_attach(s->mpu->uart[BT_UART], radio);
}
static void n8x0_usb_setup(struct n800_s *s)
@@ -774,13 +774,13 @@ static void n8x0_usb_setup(struct n800_s *s)
dev = sysbus_from_qdev(s->usb);
qdev_init_nofail(s->usb);
sysbus_connect_irq(dev, 0,
- qdev_get_gpio_in(s->cpu->gpio, N8X0_TUSB_INT_GPIO));
+ qdev_get_gpio_in(s->mpu->gpio, N8X0_TUSB_INT_GPIO));
/* Using the NOR interface */
- omap_gpmc_attach(s->cpu->gpmc, N8X0_USB_ASYNC_CS,
+ omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_ASYNC_CS,
sysbus_mmio_get_region(dev, 0));
- omap_gpmc_attach(s->cpu->gpmc, N8X0_USB_SYNC_CS,
+ omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_SYNC_CS,
sysbus_mmio_get_region(dev, 1));
- qdev_connect_gpio_out(s->cpu->gpio, N8X0_TUSB_ENABLE_GPIO,
+ qdev_connect_gpio_out(s->mpu->gpio, N8X0_TUSB_ENABLE_GPIO,
qdev_get_gpio_in(s->usb, 0)); /* tusb_pwr */
}
@@ -1023,11 +1023,11 @@ static void n8x0_boot_init(void *opaque)
n800_dss_init(&s->blizzard);
/* CPU setup */
- s->cpu->cpu->env.GE = 0x5;
+ s->mpu->cpu->env.GE = 0x5;
/* If the machine has a slided keyboard, open it */
if (s->kbd)
- qemu_irq_raise(qdev_get_gpio_in(s->cpu->gpio, N810_SLIDE_GPIO));
+ qemu_irq_raise(qdev_get_gpio_in(s->mpu->gpio, N810_SLIDE_GPIO));
}
#define OMAP_TAG_NOKIA_BT 0x4e01
@@ -1281,7 +1281,7 @@ static void n8x0_init(ram_addr_t ram_size, const char *boot_device,
int sdram_size = binfo->ram_size;
DisplayState *ds;
- s->cpu = omap2420_mpu_init(sysmem, sdram_size, cpu_model);
+ s->mpu = omap2420_mpu_init(sysmem, sdram_size, cpu_model);
/* Setup peripherals
*
@@ -1329,7 +1329,7 @@ static void n8x0_init(ram_addr_t ram_size, const char *boot_device,
binfo->kernel_filename = kernel_filename;
binfo->kernel_cmdline = kernel_cmdline;
binfo->initrd_filename = initrd_filename;
- arm_load_kernel(&s->cpu->cpu->env, binfo);
+ arm_load_kernel(&s->mpu->cpu->env, binfo);
qemu_register_reset(n8x0_boot_init, s);
}
@@ -1338,7 +1338,7 @@ static void n8x0_init(ram_addr_t ram_size, const char *boot_device,
int rom_size;
uint8_t nolo_tags[0x10000];
/* No, wait, better start at the ROM. */
- s->cpu->cpu->env.regs[15] = OMAP2_Q2_BASE + 0x400000;
+ s->mpu->cpu->env.regs[15] = OMAP2_Q2_BASE + 0x400000;
/* This is intended for loading the `secondary.bin' program from
* Nokia images (the NOLO bootloader). The entry point seems
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-11 21:48:57 +0000