aboutsummaryrefslogtreecommitdiff
path: root/hw/net/smc91c111.c
diff options
context:
space:
mode:
Diffstat (limited to 'hw/net/smc91c111.c')
-rw-r--r--hw/net/smc91c111.c806
1 files changed, 806 insertions, 0 deletions
diff --git a/hw/net/smc91c111.c b/hw/net/smc91c111.c
new file mode 100644
index 0000000000..f659256d6e
--- /dev/null
+++ b/hw/net/smc91c111.c
@@ -0,0 +1,806 @@
+/*
+ * SMSC 91C111 Ethernet interface emulation
+ *
+ * Copyright (c) 2005 CodeSourcery, LLC.
+ * Written by Paul Brook
+ *
+ * This code is licensed under the GPL
+ */
+
+#include "hw/sysbus.h"
+#include "net/net.h"
+#include "hw/arm/devices.h"
+/* For crc32 */
+#include <zlib.h>
+
+/* Number of 2k memory pages available. */
+#define NUM_PACKETS 4
+
+typedef struct {
+ SysBusDevice busdev;
+ NICState *nic;
+ NICConf conf;
+ uint16_t tcr;
+ uint16_t rcr;
+ uint16_t cr;
+ uint16_t ctr;
+ uint16_t gpr;
+ uint16_t ptr;
+ uint16_t ercv;
+ qemu_irq irq;
+ int bank;
+ int packet_num;
+ int tx_alloc;
+ /* Bitmask of allocated packets. */
+ int allocated;
+ int tx_fifo_len;
+ int tx_fifo[NUM_PACKETS];
+ int rx_fifo_len;
+ int rx_fifo[NUM_PACKETS];
+ int tx_fifo_done_len;
+ int tx_fifo_done[NUM_PACKETS];
+ /* Packet buffer memory. */
+ uint8_t data[NUM_PACKETS][2048];
+ uint8_t int_level;
+ uint8_t int_mask;
+ MemoryRegion mmio;
+} smc91c111_state;
+
+static const VMStateDescription vmstate_smc91c111 = {
+ .name = "smc91c111",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField []) {
+ VMSTATE_UINT16(tcr, smc91c111_state),
+ VMSTATE_UINT16(rcr, smc91c111_state),
+ VMSTATE_UINT16(cr, smc91c111_state),
+ VMSTATE_UINT16(ctr, smc91c111_state),
+ VMSTATE_UINT16(gpr, smc91c111_state),
+ VMSTATE_UINT16(ptr, smc91c111_state),
+ VMSTATE_UINT16(ercv, smc91c111_state),
+ VMSTATE_INT32(bank, smc91c111_state),
+ VMSTATE_INT32(packet_num, smc91c111_state),
+ VMSTATE_INT32(tx_alloc, smc91c111_state),
+ VMSTATE_INT32(allocated, smc91c111_state),
+ VMSTATE_INT32(tx_fifo_len, smc91c111_state),
+ VMSTATE_INT32_ARRAY(tx_fifo, smc91c111_state, NUM_PACKETS),
+ VMSTATE_INT32(rx_fifo_len, smc91c111_state),
+ VMSTATE_INT32_ARRAY(rx_fifo, smc91c111_state, NUM_PACKETS),
+ VMSTATE_INT32(tx_fifo_done_len, smc91c111_state),
+ VMSTATE_INT32_ARRAY(tx_fifo_done, smc91c111_state, NUM_PACKETS),
+ VMSTATE_BUFFER_UNSAFE(data, smc91c111_state, 0, NUM_PACKETS * 2048),
+ VMSTATE_UINT8(int_level, smc91c111_state),
+ VMSTATE_UINT8(int_mask, smc91c111_state),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+#define RCR_SOFT_RST 0x8000
+#define RCR_STRIP_CRC 0x0200
+#define RCR_RXEN 0x0100
+
+#define TCR_EPH_LOOP 0x2000
+#define TCR_NOCRC 0x0100
+#define TCR_PAD_EN 0x0080
+#define TCR_FORCOL 0x0004
+#define TCR_LOOP 0x0002
+#define TCR_TXEN 0x0001
+
+#define INT_MD 0x80
+#define INT_ERCV 0x40
+#define INT_EPH 0x20
+#define INT_RX_OVRN 0x10
+#define INT_ALLOC 0x08
+#define INT_TX_EMPTY 0x04
+#define INT_TX 0x02
+#define INT_RCV 0x01
+
+#define CTR_AUTO_RELEASE 0x0800
+#define CTR_RELOAD 0x0002
+#define CTR_STORE 0x0001
+
+#define RS_ALGNERR 0x8000
+#define RS_BRODCAST 0x4000
+#define RS_BADCRC 0x2000
+#define RS_ODDFRAME 0x1000
+#define RS_TOOLONG 0x0800
+#define RS_TOOSHORT 0x0400
+#define RS_MULTICAST 0x0001
+
+/* Update interrupt status. */
+static void smc91c111_update(smc91c111_state *s)
+{
+ int level;
+
+ if (s->tx_fifo_len == 0)
+ s->int_level |= INT_TX_EMPTY;
+ if (s->tx_fifo_done_len != 0)
+ s->int_level |= INT_TX;
+ level = (s->int_level & s->int_mask) != 0;
+ qemu_set_irq(s->irq, level);
+}
+
+/* Try to allocate a packet. Returns 0x80 on failure. */
+static int smc91c111_allocate_packet(smc91c111_state *s)
+{
+ int i;
+ if (s->allocated == (1 << NUM_PACKETS) - 1) {
+ return 0x80;
+ }
+
+ for (i = 0; i < NUM_PACKETS; i++) {
+ if ((s->allocated & (1 << i)) == 0)
+ break;
+ }
+ s->allocated |= 1 << i;
+ return i;
+}
+
+
+/* Process a pending TX allocate. */
+static void smc91c111_tx_alloc(smc91c111_state *s)
+{
+ s->tx_alloc = smc91c111_allocate_packet(s);
+ if (s->tx_alloc == 0x80)
+ return;
+ s->int_level |= INT_ALLOC;
+ smc91c111_update(s);
+}
+
+/* Remove and item from the RX FIFO. */
+static void smc91c111_pop_rx_fifo(smc91c111_state *s)
+{
+ int i;
+
+ s->rx_fifo_len--;
+ if (s->rx_fifo_len) {
+ for (i = 0; i < s->rx_fifo_len; i++)
+ s->rx_fifo[i] = s->rx_fifo[i + 1];
+ s->int_level |= INT_RCV;
+ } else {
+ s->int_level &= ~INT_RCV;
+ }
+ smc91c111_update(s);
+}
+
+/* Remove an item from the TX completion FIFO. */
+static void smc91c111_pop_tx_fifo_done(smc91c111_state *s)
+{
+ int i;
+
+ if (s->tx_fifo_done_len == 0)
+ return;
+ s->tx_fifo_done_len--;
+ for (i = 0; i < s->tx_fifo_done_len; i++)
+ s->tx_fifo_done[i] = s->tx_fifo_done[i + 1];
+}
+
+/* Release the memory allocated to a packet. */
+static void smc91c111_release_packet(smc91c111_state *s, int packet)
+{
+ s->allocated &= ~(1 << packet);
+ if (s->tx_alloc == 0x80)
+ smc91c111_tx_alloc(s);
+}
+
+/* Flush the TX FIFO. */
+static void smc91c111_do_tx(smc91c111_state *s)
+{
+ int i;
+ int len;
+ int control;
+ int packetnum;
+ uint8_t *p;
+
+ if ((s->tcr & TCR_TXEN) == 0)
+ return;
+ if (s->tx_fifo_len == 0)
+ return;
+ for (i = 0; i < s->tx_fifo_len; i++) {
+ packetnum = s->tx_fifo[i];
+ p = &s->data[packetnum][0];
+ /* Set status word. */
+ *(p++) = 0x01;
+ *(p++) = 0x40;
+ len = *(p++);
+ len |= ((int)*(p++)) << 8;
+ len -= 6;
+ control = p[len + 1];
+ if (control & 0x20)
+ len++;
+ /* ??? This overwrites the data following the buffer.
+ Don't know what real hardware does. */
+ if (len < 64 && (s->tcr & TCR_PAD_EN)) {
+ memset(p + len, 0, 64 - len);
+ len = 64;
+ }
+#if 0
+ {
+ int add_crc;
+
+ /* The card is supposed to append the CRC to the frame.
+ However none of the other network traffic has the CRC
+ appended. Suspect this is low level ethernet detail we
+ don't need to worry about. */
+ add_crc = (control & 0x10) || (s->tcr & TCR_NOCRC) == 0;
+ if (add_crc) {
+ uint32_t crc;
+
+ crc = crc32(~0, p, len);
+ memcpy(p + len, &crc, 4);
+ len += 4;
+ }
+ }
+#endif
+ if (s->ctr & CTR_AUTO_RELEASE)
+ /* Race? */
+ smc91c111_release_packet(s, packetnum);
+ else if (s->tx_fifo_done_len < NUM_PACKETS)
+ s->tx_fifo_done[s->tx_fifo_done_len++] = packetnum;
+ qemu_send_packet(qemu_get_queue(s->nic), p, len);
+ }
+ s->tx_fifo_len = 0;
+ smc91c111_update(s);
+}
+
+/* Add a packet to the TX FIFO. */
+static void smc91c111_queue_tx(smc91c111_state *s, int packet)
+{
+ if (s->tx_fifo_len == NUM_PACKETS)
+ return;
+ s->tx_fifo[s->tx_fifo_len++] = packet;
+ smc91c111_do_tx(s);
+}
+
+static void smc91c111_reset(DeviceState *dev)
+{
+ smc91c111_state *s = FROM_SYSBUS(smc91c111_state, SYS_BUS_DEVICE(dev));
+ s->bank = 0;
+ s->tx_fifo_len = 0;
+ s->tx_fifo_done_len = 0;
+ s->rx_fifo_len = 0;
+ s->allocated = 0;
+ s->packet_num = 0;
+ s->tx_alloc = 0;
+ s->tcr = 0;
+ s->rcr = 0;
+ s->cr = 0xa0b1;
+ s->ctr = 0x1210;
+ s->ptr = 0;
+ s->ercv = 0x1f;
+ s->int_level = INT_TX_EMPTY;
+ s->int_mask = 0;
+ smc91c111_update(s);
+}
+
+#define SET_LOW(name, val) s->name = (s->name & 0xff00) | val
+#define SET_HIGH(name, val) s->name = (s->name & 0xff) | (val << 8)
+
+static void smc91c111_writeb(void *opaque, hwaddr offset,
+ uint32_t value)
+{
+ smc91c111_state *s = (smc91c111_state *)opaque;
+
+ offset = offset & 0xf;
+ if (offset == 14) {
+ s->bank = value;
+ return;
+ }
+ if (offset == 15)
+ return;
+ switch (s->bank) {
+ case 0:
+ switch (offset) {
+ case 0: /* TCR */
+ SET_LOW(tcr, value);
+ return;
+ case 1:
+ SET_HIGH(tcr, value);
+ return;
+ case 4: /* RCR */
+ SET_LOW(rcr, value);
+ return;
+ case 5:
+ SET_HIGH(rcr, value);
+ if (s->rcr & RCR_SOFT_RST)
+ smc91c111_reset(&s->busdev.qdev);
+ return;
+ case 10: case 11: /* RPCR */
+ /* Ignored */
+ return;
+ case 12: case 13: /* Reserved */
+ return;
+ }
+ break;
+
+ case 1:
+ switch (offset) {
+ case 0: /* CONFIG */
+ SET_LOW(cr, value);
+ return;
+ case 1:
+ SET_HIGH(cr,value);
+ return;
+ case 2: case 3: /* BASE */
+ case 4: case 5: case 6: case 7: case 8: case 9: /* IA */
+ /* Not implemented. */
+ return;
+ case 10: /* Genral Purpose */
+ SET_LOW(gpr, value);
+ return;
+ case 11:
+ SET_HIGH(gpr, value);
+ return;
+ case 12: /* Control */
+ if (value & 1)
+ fprintf(stderr, "smc91c111:EEPROM store not implemented\n");
+ if (value & 2)
+ fprintf(stderr, "smc91c111:EEPROM reload not implemented\n");
+ value &= ~3;
+ SET_LOW(ctr, value);
+ return;
+ case 13:
+ SET_HIGH(ctr, value);
+ return;
+ }
+ break;
+
+ case 2:
+ switch (offset) {
+ case 0: /* MMU Command */
+ switch (value >> 5) {
+ case 0: /* no-op */
+ break;
+ case 1: /* Allocate for TX. */
+ s->tx_alloc = 0x80;
+ s->int_level &= ~INT_ALLOC;
+ smc91c111_update(s);
+ smc91c111_tx_alloc(s);
+ break;
+ case 2: /* Reset MMU. */
+ s->allocated = 0;
+ s->tx_fifo_len = 0;
+ s->tx_fifo_done_len = 0;
+ s->rx_fifo_len = 0;
+ s->tx_alloc = 0;
+ break;
+ case 3: /* Remove from RX FIFO. */
+ smc91c111_pop_rx_fifo(s);
+ break;
+ case 4: /* Remove from RX FIFO and release. */
+ if (s->rx_fifo_len > 0) {
+ smc91c111_release_packet(s, s->rx_fifo[0]);
+ }
+ smc91c111_pop_rx_fifo(s);
+ break;
+ case 5: /* Release. */
+ smc91c111_release_packet(s, s->packet_num);
+ break;
+ case 6: /* Add to TX FIFO. */
+ smc91c111_queue_tx(s, s->packet_num);
+ break;
+ case 7: /* Reset TX FIFO. */
+ s->tx_fifo_len = 0;
+ s->tx_fifo_done_len = 0;
+ break;
+ }
+ return;
+ case 1:
+ /* Ignore. */
+ return;
+ case 2: /* Packet Number Register */
+ s->packet_num = value;
+ return;
+ case 3: case 4: case 5:
+ /* Should be readonly, but linux writes to them anyway. Ignore. */
+ return;
+ case 6: /* Pointer */
+ SET_LOW(ptr, value);
+ return;
+ case 7:
+ SET_HIGH(ptr, value);
+ return;
+ case 8: case 9: case 10: case 11: /* Data */
+ {
+ int p;
+ int n;
+
+ if (s->ptr & 0x8000)
+ n = s->rx_fifo[0];
+ else
+ n = s->packet_num;
+ p = s->ptr & 0x07ff;
+ if (s->ptr & 0x4000) {
+ s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x7ff);
+ } else {
+ p += (offset & 3);
+ }
+ s->data[n][p] = value;
+ }
+ return;
+ case 12: /* Interrupt ACK. */
+ s->int_level &= ~(value & 0xd6);
+ if (value & INT_TX)
+ smc91c111_pop_tx_fifo_done(s);
+ smc91c111_update(s);
+ return;
+ case 13: /* Interrupt mask. */
+ s->int_mask = value;
+ smc91c111_update(s);
+ return;
+ }
+ break;
+
+ case 3:
+ switch (offset) {
+ case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7:
+ /* Multicast table. */
+ /* Not implemented. */
+ return;
+ case 8: case 9: /* Management Interface. */
+ /* Not implemented. */
+ return;
+ case 12: /* Early receive. */
+ s->ercv = value & 0x1f;
+ return;
+ case 13:
+ /* Ignore. */
+ return;
+ }
+ break;
+ }
+ hw_error("smc91c111_write: Bad reg %d:%x\n", s->bank, (int)offset);
+}
+
+static uint32_t smc91c111_readb(void *opaque, hwaddr offset)
+{
+ smc91c111_state *s = (smc91c111_state *)opaque;
+
+ offset = offset & 0xf;
+ if (offset == 14) {
+ return s->bank;
+ }
+ if (offset == 15)
+ return 0x33;
+ switch (s->bank) {
+ case 0:
+ switch (offset) {
+ case 0: /* TCR */
+ return s->tcr & 0xff;
+ case 1:
+ return s->tcr >> 8;
+ case 2: /* EPH Status */
+ return 0;
+ case 3:
+ return 0x40;
+ case 4: /* RCR */
+ return s->rcr & 0xff;
+ case 5:
+ return s->rcr >> 8;
+ case 6: /* Counter */
+ case 7:
+ /* Not implemented. */
+ return 0;
+ case 8: /* Memory size. */
+ return NUM_PACKETS;
+ case 9: /* Free memory available. */
+ {
+ int i;
+ int n;
+ n = 0;
+ for (i = 0; i < NUM_PACKETS; i++) {
+ if (s->allocated & (1 << i))
+ n++;
+ }
+ return n;
+ }
+ case 10: case 11: /* RPCR */
+ /* Not implemented. */
+ return 0;
+ case 12: case 13: /* Reserved */
+ return 0;
+ }
+ break;
+
+ case 1:
+ switch (offset) {
+ case 0: /* CONFIG */
+ return s->cr & 0xff;
+ case 1:
+ return s->cr >> 8;
+ case 2: case 3: /* BASE */
+ /* Not implemented. */
+ return 0;
+ case 4: case 5: case 6: case 7: case 8: case 9: /* IA */
+ return s->conf.macaddr.a[offset - 4];
+ case 10: /* General Purpose */
+ return s->gpr & 0xff;
+ case 11:
+ return s->gpr >> 8;
+ case 12: /* Control */
+ return s->ctr & 0xff;
+ case 13:
+ return s->ctr >> 8;
+ }
+ break;
+
+ case 2:
+ switch (offset) {
+ case 0: case 1: /* MMUCR Busy bit. */
+ return 0;
+ case 2: /* Packet Number. */
+ return s->packet_num;
+ case 3: /* Allocation Result. */
+ return s->tx_alloc;
+ case 4: /* TX FIFO */
+ if (s->tx_fifo_done_len == 0)
+ return 0x80;
+ else
+ return s->tx_fifo_done[0];
+ case 5: /* RX FIFO */
+ if (s->rx_fifo_len == 0)
+ return 0x80;
+ else
+ return s->rx_fifo[0];
+ case 6: /* Pointer */
+ return s->ptr & 0xff;
+ case 7:
+ return (s->ptr >> 8) & 0xf7;
+ case 8: case 9: case 10: case 11: /* Data */
+ {
+ int p;
+ int n;
+
+ if (s->ptr & 0x8000)
+ n = s->rx_fifo[0];
+ else
+ n = s->packet_num;
+ p = s->ptr & 0x07ff;
+ if (s->ptr & 0x4000) {
+ s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x07ff);
+ } else {
+ p += (offset & 3);
+ }
+ return s->data[n][p];
+ }
+ case 12: /* Interrupt status. */
+ return s->int_level;
+ case 13: /* Interrupt mask. */
+ return s->int_mask;
+ }
+ break;
+
+ case 3:
+ switch (offset) {
+ case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7:
+ /* Multicast table. */
+ /* Not implemented. */
+ return 0;
+ case 8: /* Management Interface. */
+ /* Not implemented. */
+ return 0x30;
+ case 9:
+ return 0x33;
+ case 10: /* Revision. */
+ return 0x91;
+ case 11:
+ return 0x33;
+ case 12:
+ return s->ercv;
+ case 13:
+ return 0;
+ }
+ break;
+ }
+ hw_error("smc91c111_read: Bad reg %d:%x\n", s->bank, (int)offset);
+ return 0;
+}
+
+static void smc91c111_writew(void *opaque, hwaddr offset,
+ uint32_t value)
+{
+ smc91c111_writeb(opaque, offset, value & 0xff);
+ smc91c111_writeb(opaque, offset + 1, value >> 8);
+}
+
+static void smc91c111_writel(void *opaque, hwaddr offset,
+ uint32_t value)
+{
+ /* 32-bit writes to offset 0xc only actually write to the bank select
+ register (offset 0xe) */
+ if (offset != 0xc)
+ smc91c111_writew(opaque, offset, value & 0xffff);
+ smc91c111_writew(opaque, offset + 2, value >> 16);
+}
+
+static uint32_t smc91c111_readw(void *opaque, hwaddr offset)
+{
+ uint32_t val;
+ val = smc91c111_readb(opaque, offset);
+ val |= smc91c111_readb(opaque, offset + 1) << 8;
+ return val;
+}
+
+static uint32_t smc91c111_readl(void *opaque, hwaddr offset)
+{
+ uint32_t val;
+ val = smc91c111_readw(opaque, offset);
+ val |= smc91c111_readw(opaque, offset + 2) << 16;
+ return val;
+}
+
+static int smc91c111_can_receive(NetClientState *nc)
+{
+ smc91c111_state *s = qemu_get_nic_opaque(nc);
+
+ if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST))
+ return 1;
+ if (s->allocated == (1 << NUM_PACKETS) - 1)
+ return 0;
+ return 1;
+}
+
+static ssize_t smc91c111_receive(NetClientState *nc, const uint8_t *buf, size_t size)
+{
+ smc91c111_state *s = qemu_get_nic_opaque(nc);
+ int status;
+ int packetsize;
+ uint32_t crc;
+ int packetnum;
+ uint8_t *p;
+
+ if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST))
+ return -1;
+ /* Short packets are padded with zeros. Receiving a packet
+ < 64 bytes long is considered an error condition. */
+ if (size < 64)
+ packetsize = 64;
+ else
+ packetsize = (size & ~1);
+ packetsize += 6;
+ crc = (s->rcr & RCR_STRIP_CRC) == 0;
+ if (crc)
+ packetsize += 4;
+ /* TODO: Flag overrun and receive errors. */
+ if (packetsize > 2048)
+ return -1;
+ packetnum = smc91c111_allocate_packet(s);
+ if (packetnum == 0x80)
+ return -1;
+ s->rx_fifo[s->rx_fifo_len++] = packetnum;
+
+ p = &s->data[packetnum][0];
+ /* ??? Multicast packets? */
+ status = 0;
+ if (size > 1518)
+ status |= RS_TOOLONG;
+ if (size & 1)
+ status |= RS_ODDFRAME;
+ *(p++) = status & 0xff;
+ *(p++) = status >> 8;
+ *(p++) = packetsize & 0xff;
+ *(p++) = packetsize >> 8;
+ memcpy(p, buf, size & ~1);
+ p += (size & ~1);
+ /* Pad short packets. */
+ if (size < 64) {
+ int pad;
+
+ if (size & 1)
+ *(p++) = buf[size - 1];
+ pad = 64 - size;
+ memset(p, 0, pad);
+ p += pad;
+ size = 64;
+ }
+ /* It's not clear if the CRC should go before or after the last byte in
+ odd sized packets. Linux disables the CRC, so that's no help.
+ The pictures in the documentation show the CRC aligned on a 16-bit
+ boundary before the last odd byte, so that's what we do. */
+ if (crc) {
+ crc = crc32(~0, buf, size);
+ *(p++) = crc & 0xff; crc >>= 8;
+ *(p++) = crc & 0xff; crc >>= 8;
+ *(p++) = crc & 0xff; crc >>= 8;
+ *(p++) = crc & 0xff;
+ }
+ if (size & 1) {
+ *(p++) = buf[size - 1];
+ *p = 0x60;
+ } else {
+ *(p++) = 0;
+ *p = 0x40;
+ }
+ /* TODO: Raise early RX interrupt? */
+ s->int_level |= INT_RCV;
+ smc91c111_update(s);
+
+ return size;
+}
+
+static const MemoryRegionOps smc91c111_mem_ops = {
+ /* The special case for 32 bit writes to 0xc means we can't just
+ * set .impl.min/max_access_size to 1, unfortunately
+ */
+ .old_mmio = {
+ .read = { smc91c111_readb, smc91c111_readw, smc91c111_readl, },
+ .write = { smc91c111_writeb, smc91c111_writew, smc91c111_writel, },
+ },
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void smc91c111_cleanup(NetClientState *nc)
+{
+ smc91c111_state *s = qemu_get_nic_opaque(nc);
+
+ s->nic = NULL;
+}
+
+static NetClientInfo net_smc91c111_info = {
+ .type = NET_CLIENT_OPTIONS_KIND_NIC,
+ .size = sizeof(NICState),
+ .can_receive = smc91c111_can_receive,
+ .receive = smc91c111_receive,
+ .cleanup = smc91c111_cleanup,
+};
+
+static int smc91c111_init1(SysBusDevice *dev)
+{
+ smc91c111_state *s = FROM_SYSBUS(smc91c111_state, dev);
+ memory_region_init_io(&s->mmio, &smc91c111_mem_ops, s,
+ "smc91c111-mmio", 16);
+ sysbus_init_mmio(dev, &s->mmio);
+ sysbus_init_irq(dev, &s->irq);
+ qemu_macaddr_default_if_unset(&s->conf.macaddr);
+ s->nic = qemu_new_nic(&net_smc91c111_info, &s->conf,
+ object_get_typename(OBJECT(dev)), dev->qdev.id, s);
+ qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
+ /* ??? Save/restore. */
+ return 0;
+}
+
+static Property smc91c111_properties[] = {
+ DEFINE_NIC_PROPERTIES(smc91c111_state, conf),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void smc91c111_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+ k->init = smc91c111_init1;
+ dc->reset = smc91c111_reset;
+ dc->vmsd = &vmstate_smc91c111;
+ dc->props = smc91c111_properties;
+}
+
+static const TypeInfo smc91c111_info = {
+ .name = "smc91c111",
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(smc91c111_state),
+ .class_init = smc91c111_class_init,
+};
+
+static void smc91c111_register_types(void)
+{
+ type_register_static(&smc91c111_info);
+}
+
+/* Legacy helper function. Should go away when machine config files are
+ implemented. */
+void smc91c111_init(NICInfo *nd, uint32_t base, qemu_irq irq)
+{
+ DeviceState *dev;
+ SysBusDevice *s;
+
+ qemu_check_nic_model(nd, "smc91c111");
+ dev = qdev_create(NULL, "smc91c111");
+ qdev_set_nic_properties(dev, nd);
+ qdev_init_nofail(dev);
+ s = SYS_BUS_DEVICE(dev);
+ sysbus_mmio_map(s, 0, base);
+ sysbus_connect_irq(s, 0, irq);
+}
+
+type_init(smc91c111_register_types)
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-14 18:09:07 +0000