diff options
Diffstat (limited to 'hw/arm/aspeed.c')
| -rw-r--r-- | hw/arm/aspeed.c | 38 |
1 files changed, 25 insertions, 13 deletions
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index b4b1ce9efb..6ca145362c 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -338,10 +338,20 @@ static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc, return; } card = qdev_new(emmc ? TYPE_EMMC : TYPE_SD_CARD); - if (emmc) { + + /* + * Force the boot properties of the eMMC device only when the + * machine is strapped to boot from eMMC. Without these + * settings, the machine would not boot. + * + * This also allows the machine to use an eMMC device without + * boot areas when booting from the flash device (or -kernel) + * Ideally, the device and its properties should be defined on + * the command line. + */ + if (emmc && boot_emmc) { qdev_prop_set_uint64(card, "boot-partition-size", 1 * MiB); - qdev_prop_set_uint8(card, "boot-config", - boot_emmc ? 0x1 << 3 : 0x0); + qdev_prop_set_uint8(card, "boot-config", 0x1 << 3); } qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo), &error_fatal); @@ -1594,18 +1604,20 @@ static void aspeed_minibmc_machine_init(MachineState *machine) connect_serial_hds_to_uarts(bmc); qdev_realize(DEVICE(bmc->soc), NULL, &error_abort); - aspeed_board_init_flashes(&bmc->soc->fmc, - bmc->fmc_model ? bmc->fmc_model : amc->fmc_model, - amc->num_cs, - 0); + if (defaults_enabled()) { + aspeed_board_init_flashes(&bmc->soc->fmc, + bmc->fmc_model ? bmc->fmc_model : amc->fmc_model, + amc->num_cs, + 0); - aspeed_board_init_flashes(&bmc->soc->spi[0], - bmc->spi_model ? bmc->spi_model : amc->spi_model, - amc->num_cs, amc->num_cs); + aspeed_board_init_flashes(&bmc->soc->spi[0], + bmc->spi_model ? bmc->spi_model : amc->spi_model, + amc->num_cs, amc->num_cs); - aspeed_board_init_flashes(&bmc->soc->spi[1], - bmc->spi_model ? bmc->spi_model : amc->spi_model, - amc->num_cs, (amc->num_cs * 2)); + aspeed_board_init_flashes(&bmc->soc->spi[1], + bmc->spi_model ? bmc->spi_model : amc->spi_model, + amc->num_cs, (amc->num_cs * 2)); + } if (amc->i2c_init) { amc->i2c_init(bmc); |