diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/system/authz.rst | 263 | ||||
| -rw-r--r-- | docs/system/index.rst | 1 |
2 files changed, 264 insertions, 0 deletions
diff --git a/docs/system/authz.rst b/docs/system/authz.rst new file mode 100644 index 0000000000..942af39602 --- /dev/null +++ b/docs/system/authz.rst @@ -0,0 +1,263 @@ +.. _client authorization: + +Client authorization +-------------------- + +When configuring a QEMU network backend with either TLS certificates or SASL +authentication, access will be granted if the client successfully proves +their identity. If the authorization identity database is scoped to the QEMU +client this may be sufficient. It is common, however, for the identity database +to be much broader and thus authentication alone does not enable sufficient +access control. In this case QEMU provides a flexible system for enforcing +finer grained authorization on clients post-authentication. + +Identity providers +~~~~~~~~~~~~~~~~~~ + +At the time of writing there are two authentication frameworks used by QEMU +that emit an identity upon completion. + + * TLS x509 certificate distinguished name. + + When configuring the QEMU backend as a network server with TLS, there + are a choice of credentials to use. The most common scenario is to utilize + x509 certificates. The simplest configuration only involves issuing + certificates to the servers, allowing the client to avoid a MITM attack + against their intended server. + + It is possible, however, to enable mutual verification by requiring that + the client provide a certificate to the server to prove its own identity. + This is done by setting the property ``verify-peer=yes`` on the + ``tls-creds-x509`` object, which is in fact the default. + + When peer verification is enabled, client will need to be issued with a + certificate by the same certificate authority as the server. If this is + still not sufficiently strong access control the Distinguished Name of + the certificate can be used as an identity in the QEMU authorization + framework. + + * SASL username. + + When configuring the QEMU backend as a network server with SASL, upon + completion of the SASL authentication mechanism, a username will be + provided. The format of this username will vary depending on the choice + of mechanism configured for SASL. It might be a simple UNIX style user + ``joebloggs``, while if using Kerberos/GSSAPI it can have a realm + attached ``joebloggs@QEMU.ORG``. Whatever format the username is presented + in, it can be used with the QEMU authorization framework. + +Authorization drivers +~~~~~~~~~~~~~~~~~~~~~ + +The QEMU authorization framework is a general purpose design with choice of +user customizable drivers. These are provided as objects that can be +created at startup using the ``-object`` argument, or at runtime using the +``object_add`` monitor command. + +Simple +^^^^^^ + +This authorization driver provides a simple mechanism for granting access +based on an exact match against a single identity. This is useful when it is +known that only a single client is to be allowed access. + +A possible use case would be when configuring QEMU for an incoming live +migration. It is known exactly which source QEMU the migration is expected +to arrive from. The x509 certificate associated with this source QEMU would +thus be used as the identity to match against. Alternatively if the virtual +machine is dedicated to a specific tenant, then the VNC server would be +configured with SASL and the username of only that tenant listed. + +To create an instance of this driver via QMP: + +:: + + { + "execute": "object-add", + "arguments": { + "qom-type": "authz-simple", + "id": "authz0", + "props": { + "identity": "fred" + } + } + } + + +Or via the command line + +:: + + -object authz-simple,id=authz0,identity=fred + + +List +^^^^ + +In some network backends it will be desirable to grant access to a range of +clients. This authorization driver provides a list mechanism for granting +access by matching identities against a list of permitted one. Each match +rule has an associated policy and a catch all policy applies if no rule +matches. The match can either be done as an exact string comparison, or can +use the shell-like glob syntax, which allows for use of wildcards. + +To create an instance of this class via QMP: + +:: + + { + "execute": "object-add", + "arguments": { + "qom-type": "authz-list", + "id": "authz0", + "props": { + "rules": [ + { "match": "fred", "policy": "allow", "format": "exact" }, + { "match": "bob", "policy": "allow", "format": "exact" }, + { "match": "danb", "policy": "deny", "format": "exact" }, + { "match": "dan*", "policy": "allow", "format": "glob" } + ], + "policy": "deny" + } + } + } + + +Due to the way this driver requires setting nested properties, creating +it on the command line will require use of the JSON syntax for ``-object``. +In most cases, however, the next driver will be more suitable. + +List file +^^^^^^^^^ + +This is a variant on the previous driver that allows for a more dynamic +access control policy by storing the match rules in a standalone file +that can be reloaded automatically upon change. + +To create an instance of this class via QMP: + +:: + + { + "execute": "object-add", + "arguments": { + "qom-type": "authz-list-file", + "id": "authz0", + "props": { + "filename": "/etc/qemu/myvm-vnc.acl", + "refresh": true + } + } + } + + +If ``refresh`` is ``yes``, inotify is used to monitor for changes +to the file and auto-reload the rules. + +The ``myvm-vnc.acl`` file should contain the match rules in a format that +closely matches the previous driver: + +:: + + { + "rules": [ + { "match": "fred", "policy": "allow", "format": "exact" }, + { "match": "bob", "policy": "allow", "format": "exact" }, + { "match": "danb", "policy": "deny", "format": "exact" }, + { "match": "dan*", "policy": "allow", "format": "glob" } + ], + "policy": "deny" + } + + +The object can be created on the command line using + +:: + + -object authz-list-file,id=authz0,\ + filename=/etc/qemu/myvm-vnc.acl,refresh=on + + +PAM +^^^ + +In some scenarios it might be desirable to integrate with authorization +mechanisms that are implemented outside of QEMU. In order to allow maximum +flexibility, QEMU provides a driver that uses the ``PAM`` framework. + +To create an instance of this class via QMP: + +:: + + { + "execute": "object-add", + "arguments": { + "qom-type": "authz-pam", + "id": "authz0", + "parameters": { + "service": "qemu-vnc-tls" + } + } + } + + +The driver only uses the PAM "account" verification +subsystem. The above config would require a config +file /etc/pam.d/qemu-vnc-tls. For a simple file +lookup it would contain + +:: + + account requisite pam_listfile.so item=user sense=allow \ + file=/etc/qemu/vnc.allow + + +The external file would then contain a list of usernames. +If x509 cert was being used as the username, a suitable +entry would match the distinguished name: + +:: + + CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB + + +On the command line it can be created using + +:: + + -object authz-pam,id=authz0,service=qemu-vnc-tls + + +There are a variety of PAM plugins that can be used which are not illustrated +here, and it is possible to implement brand new plugins using the PAM API. + + +Connecting backends +~~~~~~~~~~~~~~~~~~~ + +The authorization driver is created using the ``-object`` argument and then +needs to be associated with a network service. The authorization driver object +will be given a unique ID that needs to be referenced. + +The property to set in the network service will vary depending on the type of +identity to verify. By convention, any network server backend that uses TLS +will provide ``tls-authz`` property, while any server using SASL will provide +a ``sasl-authz`` property. + +Thus an example using SASL and authorization for the VNC server would look +like: + +:: + + $QEMU --object authz-simple,id=authz0,identity=fred \ + --vnc 0.0.0.0:1,sasl,sasl-authz=authz0 + +While to validate both the x509 certificate and SASL username: + +:: + + echo "CN=laptop.qemu.org,O=QEMU Project,L=London,ST=London,C=GB" >> tls.acl + $QEMU --object authz-simple,id=authz0,identity=fred \ + --object authz-list-file,id=authz1,filename=tls.acl \ + --object tls-creds-x509,id=tls0,dir=/etc/qemu/tls,verify-peer=yes \ + --vnc 0.0.0.0:1,sasl,sasl-authz=auth0,tls-creds=tls0,tls-authz=authz1 diff --git a/docs/system/index.rst b/docs/system/index.rst index 6aa2f8c05c..6092eb2d91 100644 --- a/docs/system/index.rst +++ b/docs/system/index.rst @@ -31,6 +31,7 @@ Contents: vnc-security tls secrets + authz gdb managed-startup cpu-hotplug |