diff options
| -rwxr-xr-x | configure | 26 | ||||
| -rw-r--r-- | disas.c | 219 | ||||
| -rw-r--r-- | include/disas/bfd.h | 4 | ||||
| -rw-r--r-- | include/disas/capstone.h | 38 |
4 files changed, 274 insertions, 13 deletions
@@ -375,6 +375,7 @@ opengl_dmabuf="no" cpuid_h="no" avx2_opt="no" zlib="yes" +capstone="" lzo="" snappy="" bzip2="" @@ -1294,6 +1295,10 @@ for opt do error_exit "vhost-user isn't available on win32" fi ;; + --disable-capstone) capstone="no" + ;; + --enable-capstone) capstone="yes" + ;; *) echo "ERROR: unknown option $opt" echo "Try '$0 --help' for more information" @@ -1541,6 +1546,7 @@ disabled with --disable-FEATURE, default is enabled if available: vxhs Veritas HyperScale vDisk backend support crypto-afalg Linux AF_ALG crypto backend driver vhost-user vhost-user support + capstone capstone disassembler support NOTE: The object files are built at the place where configure is launched EOF @@ -4411,6 +4417,22 @@ EOF fi ########################################## +# capstone + +if test "$capstone" != no; then + if $pkg_config capstone; then + capstone=yes + QEMU_CFLAGS="$QEMU_CFLAGS $($pkg_config --cflags capstone)" + LIBS="$($pkg_config --libs capstone) $LIBS" + else + if test "$capstone" = yes; then + feature_not_found capstone + fi + capstone=no + fi +fi + +########################################## # check if we have fdatasync fdatasync=no @@ -5468,6 +5490,7 @@ echo "jemalloc support $jemalloc" echo "avx2 optimization $avx2_opt" echo "replication support $replication" echo "VxHS block device $vxhs" +echo "capstone $capstone" if test "$sdl_too_old" = "yes"; then echo "-> Your SDL version is too old - please upgrade to have SDL support" @@ -6142,6 +6165,9 @@ fi if test "$ivshmem" = "yes" ; then echo "CONFIG_IVSHMEM=y" >> $config_host_mak fi +if test "$capstone" = "yes" ; then + echo "CONFIG_CAPSTONE=y" >> $config_host_mak +fi # Hold two types of flag: # CONFIG_THREAD_SETNAME_BYTHREAD - we've got a way of setting the name on @@ -6,6 +6,7 @@ #include "cpu.h" #include "disas/disas.h" +#include "disas/capstone.h" typedef struct CPUDebug { struct disassemble_info info; @@ -171,6 +172,192 @@ static int print_insn_od_target(bfd_vma pc, disassemble_info *info) return print_insn_objdump(pc, info, "OBJD-T"); } +#ifdef CONFIG_CAPSTONE +/* Temporary storage for the capstone library. This will be alloced via + malloc with a size private to the library; thus there's no reason not + to share this across calls and across host vs target disassembly. */ +static __thread cs_insn *cap_insn; + +/* Initialize the Capstone library. */ +/* ??? It would be nice to cache this. We would need one handle for the + host and one for the target. For most targets we can reset specific + parameters via cs_option(CS_OPT_MODE, new_mode), but we cannot change + CS_ARCH_* in this way. Thus we would need to be able to close and + re-open the target handle with a different arch for the target in order + to handle AArch64 vs AArch32 mode switching. */ +static cs_err cap_disas_start(disassemble_info *info, csh *handle) +{ + cs_mode cap_mode = info->cap_mode; + cs_err err; + + cap_mode += (info->endian == BFD_ENDIAN_BIG ? CS_MODE_BIG_ENDIAN + : CS_MODE_LITTLE_ENDIAN); + + err = cs_open(info->cap_arch, cap_mode, handle); + if (err != CS_ERR_OK) { + return err; + } + + /* ??? There probably ought to be a better place to put this. */ + if (info->cap_arch == CS_ARCH_X86) { + /* We don't care about errors (if for some reason the library + is compiled without AT&T syntax); the user will just have + to deal with the Intel syntax. */ + cs_option(*handle, CS_OPT_SYNTAX, CS_OPT_SYNTAX_ATT); + } + + /* "Disassemble" unknown insns as ".byte W,X,Y,Z". */ + cs_option(*handle, CS_OPT_SKIPDATA, CS_OPT_ON); + + /* Allocate temp space for cs_disasm_iter. */ + if (cap_insn == NULL) { + cap_insn = cs_malloc(*handle); + if (cap_insn == NULL) { + cs_close(handle); + return CS_ERR_MEM; + } + } + return CS_ERR_OK; +} + +/* Disassemble SIZE bytes at PC for the target. */ +static bool cap_disas_target(disassemble_info *info, uint64_t pc, size_t size) +{ + uint8_t cap_buf[1024]; + csh handle; + cs_insn *insn; + size_t csize = 0; + + if (cap_disas_start(info, &handle) != CS_ERR_OK) { + return false; + } + insn = cap_insn; + + while (1) { + size_t tsize = MIN(sizeof(cap_buf) - csize, size); + const uint8_t *cbuf = cap_buf; + + target_read_memory(pc + csize, cap_buf + csize, tsize, info); + csize += tsize; + size -= tsize; + + while (cs_disasm_iter(handle, &cbuf, &csize, &pc, insn)) { + (*info->fprintf_func)(info->stream, + "0x%08" PRIx64 ": %-12s %s\n", + insn->address, insn->mnemonic, + insn->op_str); + } + + /* If the target memory is not consumed, go back for more... */ + if (size != 0) { + /* ... taking care to move any remaining fractional insn + to the beginning of the buffer. */ + if (csize != 0) { + memmove(cap_buf, cbuf, csize); + } + continue; + } + + /* Since the target memory is consumed, we should not have + a remaining fractional insn. */ + if (csize != 0) { + (*info->fprintf_func)(info->stream, + "Disassembler disagrees with translator " + "over instruction decoding\n" + "Please report this to qemu-devel@nongnu.org\n"); + } + break; + } + + cs_close(&handle); + return true; +} + +/* Disassemble SIZE bytes at CODE for the host. */ +static bool cap_disas_host(disassemble_info *info, void *code, size_t size) +{ + csh handle; + const uint8_t *cbuf; + cs_insn *insn; + uint64_t pc; + + if (cap_disas_start(info, &handle) != CS_ERR_OK) { + return false; + } + insn = cap_insn; + + cbuf = code; + pc = (uintptr_t)code; + + while (cs_disasm_iter(handle, &cbuf, &size, &pc, insn)) { + (*info->fprintf_func)(info->stream, + "0x%08" PRIx64 ": %-12s %s\n", + insn->address, insn->mnemonic, + insn->op_str); + } + if (size != 0) { + (*info->fprintf_func)(info->stream, + "Disassembler disagrees with TCG over instruction encoding\n" + "Please report this to qemu-devel@nongnu.org\n"); + } + + cs_close(&handle); + return true; +} + +#if !defined(CONFIG_USER_ONLY) +/* Disassemble COUNT insns at PC for the target. */ +static bool cap_disas_monitor(disassemble_info *info, uint64_t pc, int count) +{ + uint8_t cap_buf[32]; + csh handle; + cs_insn *insn; + size_t csize = 0; + + if (cap_disas_start(info, &handle) != CS_ERR_OK) { + return false; + } + insn = cap_insn; + + while (1) { + /* We want to read memory for one insn, but generically we do not + know how much memory that is. We have a small buffer which is + known to be sufficient for all supported targets. Try to not + read beyond the page, Just In Case. For even more simplicity, + ignore the actual target page size and use a 1k boundary. If + that turns out to be insufficient, we'll come back around the + loop and read more. */ + uint64_t epc = QEMU_ALIGN_UP(pc + csize + 1, 1024); + size_t tsize = MIN(sizeof(cap_buf) - csize, epc - pc); + const uint8_t *cbuf = cap_buf; + + /* Make certain that we can make progress. */ + assert(tsize != 0); + info->read_memory_func(pc, cap_buf + csize, tsize, info); + csize += tsize; + + if (cs_disasm_iter(handle, &cbuf, &csize, &pc, insn)) { + (*info->fprintf_func)(info->stream, + "0x%08" PRIx64 ": %-12s %s\n", + insn->address, insn->mnemonic, + insn->op_str); + if (--count <= 0) { + break; + } + } + memmove(cap_buf, cbuf, csize); + } + + cs_close(&handle); + return true; +} +#endif /* !CONFIG_USER_ONLY */ +#else +# define cap_disas_target(i, p, s) false +# define cap_disas_host(i, p, s) false +# define cap_disas_monitor(i, p, c) false +#endif /* CONFIG_CAPSTONE */ + /* Disassemble this for me please... (debugging). */ void target_disas(FILE *out, CPUState *cpu, target_ulong code, target_ulong size) @@ -187,6 +374,8 @@ void target_disas(FILE *out, CPUState *cpu, target_ulong code, s.info.buffer_vma = code; s.info.buffer_length = size; s.info.print_address_func = generic_print_address; + s.info.cap_arch = -1; + s.info.cap_mode = 0; #ifdef TARGET_WORDS_BIGENDIAN s.info.endian = BFD_ENDIAN_BIG; @@ -198,6 +387,10 @@ void target_disas(FILE *out, CPUState *cpu, target_ulong code, cc->disas_set_info(cpu, &s.info); } + if (s.info.cap_arch >= 0 && cap_disas_target(&s.info, code, size)) { + return; + } + if (s.info.print_insn == NULL) { s.info.print_insn = print_insn_od_target; } @@ -205,18 +398,6 @@ void target_disas(FILE *out, CPUState *cpu, target_ulong code, for (pc = code; size > 0; pc += count, size -= count) { fprintf(out, "0x" TARGET_FMT_lx ": ", pc); count = s.info.print_insn(pc, &s.info); -#if 0 - { - int i; - uint8_t b; - fprintf(out, " {"); - for(i = 0; i < count; i++) { - target_read_memory(pc + i, &b, 1, &s.info); - fprintf(out, " %02x", b); - } - fprintf(out, " }"); - } -#endif fprintf(out, "\n"); if (count < 0) break; @@ -244,6 +425,8 @@ void disas(FILE *out, void *code, unsigned long size) s.info.buffer = code; s.info.buffer_vma = (uintptr_t)code; s.info.buffer_length = size; + s.info.cap_arch = -1; + s.info.cap_mode = 0; #ifdef HOST_WORDS_BIGENDIAN s.info.endian = BFD_ENDIAN_BIG; @@ -281,6 +464,11 @@ void disas(FILE *out, void *code, unsigned long size) #elif defined(__hppa__) print_insn = print_insn_hppa; #endif + + if (s.info.cap_arch >= 0 && cap_disas_host(&s.info, code, size)) { + return; + } + if (print_insn == NULL) { print_insn = print_insn_od_host; } @@ -343,8 +531,9 @@ void monitor_disas(Monitor *mon, CPUState *cpu, monitor_disas_is_physical = is_physical; s.info.read_memory_func = monitor_read_memory; s.info.print_address_func = generic_print_address; - s.info.buffer_vma = pc; + s.info.cap_arch = -1; + s.info.cap_mode = 0; #ifdef TARGET_WORDS_BIGENDIAN s.info.endian = BFD_ENDIAN_BIG; @@ -356,6 +545,10 @@ void monitor_disas(Monitor *mon, CPUState *cpu, cc->disas_set_info(cpu, &s.info); } + if (s.info.cap_arch >= 0 && cap_disas_monitor(&s.info, pc, nb_insn)) { + return; + } + if (!s.info.print_insn) { monitor_printf(mon, "0x" TARGET_FMT_lx ": Asm output not supported on this arch\n", pc); diff --git a/include/disas/bfd.h b/include/disas/bfd.h index 2852f80ed6..1f88c9e9d5 100644 --- a/include/disas/bfd.h +++ b/include/disas/bfd.h @@ -371,6 +371,10 @@ typedef struct disassemble_info { /* Command line options specific to the target disassembler. */ char * disassembler_options; + /* Options for Capstone disassembly. */ + int cap_arch; + int cap_mode; + } disassemble_info; diff --git a/include/disas/capstone.h b/include/disas/capstone.h new file mode 100644 index 0000000000..84e214956d --- /dev/null +++ b/include/disas/capstone.h @@ -0,0 +1,38 @@ +#ifndef QEMU_CAPSTONE_H +#define QEMU_CAPSTONE_H 1 + +#ifdef CONFIG_CAPSTONE + +#include <capstone.h> + +#else + +/* Just enough to allow backends to init without ifdefs. */ + +#define CS_ARCH_ARM -1 +#define CS_ARCH_ARM64 -1 +#define CS_ARCH_MIPS -1 +#define CS_ARCH_X86 -1 +#define CS_ARCH_PPC -1 +#define CS_ARCH_SPARC -1 +#define CS_ARCH_SYSZ -1 + +#define CS_MODE_LITTLE_ENDIAN 0 +#define CS_MODE_BIG_ENDIAN 0 +#define CS_MODE_ARM 0 +#define CS_MODE_16 0 +#define CS_MODE_32 0 +#define CS_MODE_64 0 +#define CS_MODE_THUMB 0 +#define CS_MODE_MCLASS 0 +#define CS_MODE_V8 0 +#define CS_MODE_MICRO 0 +#define CS_MODE_MIPS3 0 +#define CS_MODE_MIPS32R6 0 +#define CS_MODE_MIPSGP64 0 +#define CS_MODE_V9 0 +#define CS_MODE_MIPS32 0 +#define CS_MODE_MIPS64 0 + +#endif /* CONFIG_CAPSTONE */ +#endif /* QEMU_CAPSTONE_H */ |