diff options
| author | Steffen Görtz <contrib@steffen-goertz.de> | 2019-01-07 15:23:47 +0000 |
|---|---|---|
| committer | Peter Maydell <peter.maydell@linaro.org> | 2019-01-07 15:23:47 +0000 |
| commit | 805f61bbb33ba24777a854df5d018858502d6d9c (patch) | |
| tree | bf3c08ff53cc0fbb95df31def69b02ce599dab72 /include/hw/gpio | |
| parent | f30890def51f777db1da350f9c737cc75615bdf0 (diff) | |
hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral
This adds a model of the nRF51 GPIO peripheral.
Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf
The nRF51 series microcontrollers support up to 32 GPIO pins in various configurations.
The pins can be used as input pins with pull-ups or pull-down.
Furthermore, three different output driver modes per level are
available (disconnected, standard, high-current).
The GPIO-Peripheral has a mechanism for detecting level changes which is
not featured in this model.
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-6-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Diffstat (limited to 'include/hw/gpio')
| -rw-r--r-- | include/hw/gpio/nrf51_gpio.h | 69 |
1 files changed, 69 insertions, 0 deletions
diff --git a/include/hw/gpio/nrf51_gpio.h b/include/hw/gpio/nrf51_gpio.h new file mode 100644 index 0000000000..337ee534bb --- /dev/null +++ b/include/hw/gpio/nrf51_gpio.h @@ -0,0 +1,69 @@ +/* + * nRF51 System-on-Chip general purpose input/output register definition + * + * QEMU interface: + * + sysbus MMIO regions 0: GPIO registers + * + Unnamed GPIO inputs 0-31: Set tri-state input level for GPIO pin. + * Level -1: Externally Disconnected/Floating; Pull-up/down will be regarded + * Level 0: Input externally driven LOW + * Level 1: Input externally driven HIGH + * + Unnamed GPIO outputs 0-31: + * Level -1: Disconnected/Floating + * Level 0: Driven LOW + * Level 1: Driven HIGH + * + * Accuracy of the peripheral model: + * + The nRF51 GPIO output driver supports two modes, standard and high-current + * mode. These different drive modes are not modeled and handled the same. + * + Pin SENSEing is not modeled/implemented. + * + * Copyright 2018 Steffen Görtz <contrib@steffen-goertz.de> + * + * This code is licensed under the GPL version 2 or later. See + * the COPYING file in the top-level directory. + * + */ +#ifndef NRF51_GPIO_H +#define NRF51_GPIO_H + +#include "hw/sysbus.h" +#define TYPE_NRF51_GPIO "nrf51_soc.gpio" +#define NRF51_GPIO(obj) OBJECT_CHECK(NRF51GPIOState, (obj), TYPE_NRF51_GPIO) + +#define NRF51_GPIO_PINS 32 + +#define NRF51_GPIO_SIZE 0x1000 + +#define NRF51_GPIO_REG_OUT 0x504 +#define NRF51_GPIO_REG_OUTSET 0x508 +#define NRF51_GPIO_REG_OUTCLR 0x50C +#define NRF51_GPIO_REG_IN 0x510 +#define NRF51_GPIO_REG_DIR 0x514 +#define NRF51_GPIO_REG_DIRSET 0x518 +#define NRF51_GPIO_REG_DIRCLR 0x51C +#define NRF51_GPIO_REG_CNF_START 0x700 +#define NRF51_GPIO_REG_CNF_END 0x77F + +#define NRF51_GPIO_PULLDOWN 1 +#define NRF51_GPIO_PULLUP 3 + +typedef struct NRF51GPIOState { + SysBusDevice parent_obj; + + MemoryRegion mmio; + qemu_irq irq; + + uint32_t out; + uint32_t in; + uint32_t in_mask; + uint32_t dir; + uint32_t cnf[NRF51_GPIO_PINS]; + + uint32_t old_out; + uint32_t old_out_connected; + + qemu_irq output[NRF51_GPIO_PINS]; +} NRF51GPIOState; + + +#endif |