aboutsummaryrefslogtreecommitdiff
path: root/hw
diff options
context:
space:
mode:
authorbellard <bellard@c046a42c-6fe2-441c-8c8c-71466251a162>2006-04-27 21:32:09 +0000
committerbellard <bellard@c046a42c-6fe2-441c-8c8c-71466251a162>2006-04-27 21:32:09 +0000
commit27c7ca7e7750063f6e83e4d126bbd4de2d83f79e (patch)
tree39df4cddd799e11c9a527f529855c89f072b1d8c /hw
parentfdf9b3e831e8e6b5ceb2a44c742da7d1ab558242 (diff)
SHIX board emulation (Samuel Tardieu)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1862 c046a42c-6fe2-441c-8c8c-71466251a162
Diffstat (limited to 'hw')
-rw-r--r--hw/sh7750.c836
-rw-r--r--hw/sh7750_regnames.c128
-rw-r--r--hw/sh7750_regnames.h6
-rw-r--r--hw/sh7750_regs.h1623
-rw-r--r--hw/shix.c111
-rw-r--r--hw/tc58128.c181
6 files changed, 2885 insertions, 0 deletions
diff --git a/hw/sh7750.c b/hw/sh7750.c
new file mode 100644
index 0000000000..041e3eed1b
--- /dev/null
+++ b/hw/sh7750.c
@@ -0,0 +1,836 @@
+/*
+ * SH7750 device
+ *
+ * Copyright (c) 2005 Samuel Tardieu
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include <stdio.h>
+#include <assert.h>
+#include "vl.h"
+#include "sh7750_regs.h"
+#include "sh7750_regnames.h"
+
+typedef struct {
+ uint8_t data[16];
+ uint8_t length; /* Number of characters in the FIFO */
+ uint8_t write_idx; /* Index of first character to write */
+ uint8_t read_idx; /* Index of first character to read */
+} fifo;
+
+#define NB_DEVICES 4
+
+typedef struct SH7750State {
+ /* CPU */
+ CPUSH4State *cpu;
+ /* Peripheral frequency in Hz */
+ uint32_t periph_freq;
+ /* SDRAM controller */
+ uint16_t rfcr;
+ /* First serial port */
+ CharDriverState *serial1;
+ uint8_t scscr1;
+ uint8_t scsmr1;
+ uint8_t scbrr1;
+ uint8_t scssr1;
+ uint8_t scssr1_read;
+ uint8_t sctsr1;
+ uint8_t sctsr1_loaded;
+ uint8_t sctdr1;
+ uint8_t scrdr1;
+ /* Second serial port */
+ CharDriverState *serial2;
+ uint16_t sclsr2;
+ uint16_t scscr2;
+ uint16_t scfcr2;
+ uint16_t scfsr2;
+ uint16_t scsmr2;
+ uint8_t scbrr2;
+ fifo serial2_receive_fifo;
+ fifo serial2_transmit_fifo;
+ /* Timers */
+ uint8_t tstr;
+ /* Timer 0 */
+ QEMUTimer *timer0;
+ uint16_t tcr0;
+ uint32_t tcor0;
+ uint32_t tcnt0;
+ /* IO ports */
+ uint16_t gpioic;
+ uint32_t pctra;
+ uint32_t pctrb;
+ uint16_t portdira; /* Cached */
+ uint16_t portpullupa; /* Cached */
+ uint16_t portdirb; /* Cached */
+ uint16_t portpullupb; /* Cached */
+ uint16_t pdtra;
+ uint16_t pdtrb;
+ uint16_t periph_pdtra; /* Imposed by the peripherals */
+ uint16_t periph_portdira; /* Direction seen from the peripherals */
+ uint16_t periph_pdtrb; /* Imposed by the peripherals */
+ uint16_t periph_portdirb; /* Direction seen from the peripherals */
+ sh7750_io_device *devices[NB_DEVICES]; /* External peripherals */
+ /* Cache */
+ uint32_t ccr;
+} SH7750State;
+
+/**********************************************************************
+ Timers
+**********************************************************************/
+
+/* XXXXX At this time, timer0 works in underflow only mode, that is
+ the value of tcnt0 is read at alarm computation time and cannot
+ be read back by the guest OS */
+
+static void start_timer0(SH7750State * s)
+{
+ uint64_t now, next, prescaler;
+
+ if ((s->tcr0 & 6) == 6) {
+ fprintf(stderr, "rtc clock for timer 0 not supported\n");
+ assert(0);
+ }
+
+ if ((s->tcr0 & 7) == 5) {
+ fprintf(stderr, "timer 0 configuration not supported\n");
+ assert(0);
+ }
+
+ if ((s->tcr0 & 4) == 4)
+ prescaler = 1024;
+ else
+ prescaler = 4 << (s->tcr0 & 3);
+
+ now = qemu_get_clock(vm_clock);
+ /* XXXXX */
+ next =
+ now + muldiv64(prescaler * s->tcnt0, ticks_per_sec,
+ s->periph_freq);
+ if (next == now)
+ next = now + 1;
+ fprintf(stderr, "now=%016llx, next=%016llx\n", now, next);
+ fprintf(stderr, "timer will underflow in %f seconds\n",
+ (float) (next - now) / (float) ticks_per_sec);
+
+ qemu_mod_timer(s->timer0, next);
+}
+
+static void timer_start_changed(SH7750State * s)
+{
+ if (s->tstr & SH7750_TSTR_STR0) {
+ start_timer0(s);
+ } else {
+ fprintf(stderr, "timer 0 is stopped\n");
+ qemu_del_timer(s->timer0);
+ }
+}
+
+static void timer0_cb(void *opaque)
+{
+ SH7750State *s = opaque;
+
+ s->tcnt0 = (uint32_t) 0; /* XXXXX */
+ if (--s->tcnt0 == (uint32_t) - 1) {
+ fprintf(stderr, "timer 0 underflow\n");
+ s->tcnt0 = s->tcor0;
+ s->tcr0 |= SH7750_TCR_UNF;
+ if (s->tcr0 & SH7750_TCR_UNIE) {
+ fprintf(stderr,
+ "interrupt generation for timer 0 not supported\n");
+ assert(0);
+ }
+ }
+ start_timer0(s);
+}
+
+static void init_timers(SH7750State * s)
+{
+ s->tcor0 = 0xffffffff;
+ s->tcnt0 = 0xffffffff;
+ s->timer0 = qemu_new_timer(vm_clock, &timer0_cb, s);
+}
+
+/**********************************************************************
+ First serial port
+**********************************************************************/
+
+static int serial1_can_receive(void *opaque)
+{
+ SH7750State *s = opaque;
+
+ return s->scscr1 & SH7750_SCSCR_RE;
+}
+
+static void serial1_receive_char(SH7750State * s, uint8_t c)
+{
+ if (s->scssr1 & SH7750_SCSSR1_RDRF) {
+ s->scssr1 |= SH7750_SCSSR1_ORER;
+ return;
+ }
+
+ s->scrdr1 = c;
+ s->scssr1 |= SH7750_SCSSR1_RDRF;
+}
+
+static void serial1_receive(void *opaque, const uint8_t * buf, int size)
+{
+ SH7750State *s = opaque;
+ int i;
+
+ for (i = 0; i < size; i++) {
+ serial1_receive_char(s, buf[i]);
+ }
+}
+
+static void serial1_event(void *opaque, int event)
+{
+ assert(0);
+}
+
+static void serial1_maybe_send(SH7750State * s)
+{
+ uint8_t c;
+
+ if (s->scssr1 & SH7750_SCSSR1_TDRE)
+ return;
+ c = s->sctdr1;
+ s->scssr1 |= SH7750_SCSSR1_TDRE | SH7750_SCSSR1_TEND;
+ if (s->scscr1 & SH7750_SCSCR_TIE) {
+ fprintf(stderr, "interrupts for serial port 1 not implemented\n");
+ assert(0);
+ }
+ /* XXXXX Check for errors in write */
+ qemu_chr_write(s->serial1, &c, 1);
+}
+
+static void serial1_change_scssr1(SH7750State * s, uint8_t mem_value)
+{
+ uint8_t new_flags;
+
+ /* If transmit disable, TDRE and TEND stays up */
+ if ((s->scscr1 & SH7750_SCSCR_TE) == 0) {
+ mem_value |= SH7750_SCSSR1_TDRE | SH7750_SCSSR1_TEND;
+ }
+
+ /* Only clear bits which have been read before and do not set any bit
+ in the flags */
+ new_flags = s->scssr1 & ~s->scssr1_read; /* Preserve unread flags */
+ new_flags &= mem_value | ~s->scssr1_read; /* Clear read flags */
+
+ s->scssr1 = (new_flags & 0xf8) | (mem_value & 1);
+ s->scssr1_read &= mem_value;
+
+ /* If TDRE has been cleared, TEND will also be cleared */
+ if ((s->scssr1 & SH7750_SCSSR1_TDRE) == 0) {
+ s->scssr1 &= ~SH7750_SCSSR1_TEND;
+ }
+
+ /* Check for transmission to start */
+ serial1_maybe_send(s);
+}
+
+static void serial1_update_parameters(SH7750State * s)
+{
+ QEMUSerialSetParams ssp;
+
+ if (s->scsmr1 & SH7750_SCSMR_CHR_7)
+ ssp.data_bits = 7;
+ else
+ ssp.data_bits = 8;
+ if (s->scsmr1 & SH7750_SCSMR_PE) {
+ if (s->scsmr1 & SH7750_SCSMR_PM_ODD)
+ ssp.parity = 'O';
+ else
+ ssp.parity = 'E';
+ } else
+ ssp.parity = 'N';
+ if (s->scsmr1 & SH7750_SCSMR_STOP_2)
+ ssp.stop_bits = 2;
+ else
+ ssp.stop_bits = 1;
+ fprintf(stderr, "SCSMR1=%04x SCBRR1=%02x\n", s->scsmr1, s->scbrr1);
+ ssp.speed = s->periph_freq /
+ (32 * s->scbrr1 * (1 << (2 * (s->scsmr1 & 3)))) - 1;
+ fprintf(stderr, "data bits=%d, stop bits=%d, parity=%c, speed=%d\n",
+ ssp.data_bits, ssp.stop_bits, ssp.parity, ssp.speed);
+ qemu_chr_ioctl(s->serial1, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
+}
+
+static void scscr1_changed(SH7750State * s)
+{
+ if (s->scscr1 & (SH7750_SCSCR_TE | SH7750_SCSCR_RE)) {
+ if (!s->serial1) {
+ fprintf(stderr, "serial port 1 not bound to anything\n");
+ assert(0);
+ }
+ serial1_update_parameters(s);
+ }
+ if ((s->scscr1 & SH7750_SCSCR_RE) == 0) {
+ s->scssr1 |= SH7750_SCSSR1_TDRE;
+ }
+}
+
+static void init_serial1(SH7750State * s, int serial_nb)
+{
+ CharDriverState *chr;
+
+ s->scssr1 = 0x84;
+ chr = serial_hds[serial_nb];
+ if (!chr) {
+ fprintf(stderr,
+ "no serial port associated to SH7750 first serial port\n");
+ return;
+ }
+
+ s->serial1 = chr;
+ qemu_chr_add_read_handler(chr, serial1_can_receive,
+ serial1_receive, s);
+ qemu_chr_add_event_handler(chr, serial1_event);
+}
+
+/**********************************************************************
+ Second serial port
+**********************************************************************/
+
+static int serial2_can_receive(void *opaque)
+{
+ SH7750State *s = opaque;
+ static uint8_t max_fifo_size[] = { 15, 1, 4, 6, 8, 10, 12, 14 };
+
+ return s->serial2_receive_fifo.length <
+ max_fifo_size[(s->scfcr2 >> 9) & 7];
+}
+
+static void serial2_adjust_receive_flags(SH7750State * s)
+{
+ static uint8_t max_fifo_size[] = { 1, 4, 8, 14 };
+
+ /* XXXXX Add interrupt generation */
+ if (s->serial2_receive_fifo.length >=
+ max_fifo_size[(s->scfcr2 >> 7) & 3]) {
+ s->scfsr2 |= SH7750_SCFSR2_RDF;
+ s->scfsr2 &= ~SH7750_SCFSR2_DR;
+ } else {
+ s->scfsr2 &= ~SH7750_SCFSR2_RDF;
+ if (s->serial2_receive_fifo.length > 0)
+ s->scfsr2 |= SH7750_SCFSR2_DR;
+ else
+ s->scfsr2 &= ~SH7750_SCFSR2_DR;
+ }
+}
+
+static void serial2_append_char(SH7750State * s, uint8_t c)
+{
+ if (s->serial2_receive_fifo.length == 16) {
+ /* Overflow */
+ s->sclsr2 |= SH7750_SCLSR2_ORER;
+ return;
+ }
+
+ s->serial2_receive_fifo.data[s->serial2_receive_fifo.write_idx++] = c;
+ s->serial2_receive_fifo.length++;
+ serial2_adjust_receive_flags(s);
+}
+
+static void serial2_receive(void *opaque, const uint8_t * buf, int size)
+{
+ SH7750State *s = opaque;
+ int i;
+
+ for (i = 0; i < size; i++)
+ serial2_append_char(s, buf[i]);
+}
+
+static void serial2_event(void *opaque, int event)
+{
+ /* XXXXX */
+ assert(0);
+}
+
+static void serial2_update_parameters(SH7750State * s)
+{
+ QEMUSerialSetParams ssp;
+
+ if (s->scsmr2 & SH7750_SCSMR_CHR_7)
+ ssp.data_bits = 7;
+ else
+ ssp.data_bits = 8;
+ if (s->scsmr2 & SH7750_SCSMR_PE) {
+ if (s->scsmr2 & SH7750_SCSMR_PM_ODD)
+ ssp.parity = 'O';
+ else
+ ssp.parity = 'E';
+ } else
+ ssp.parity = 'N';
+ if (s->scsmr2 & SH7750_SCSMR_STOP_2)
+ ssp.stop_bits = 2;
+ else
+ ssp.stop_bits = 1;
+ fprintf(stderr, "SCSMR2=%04x SCBRR2=%02x\n", s->scsmr2, s->scbrr2);
+ ssp.speed = s->periph_freq /
+ (32 * s->scbrr2 * (1 << (2 * (s->scsmr2 & 3)))) - 1;
+ fprintf(stderr, "data bits=%d, stop bits=%d, parity=%c, speed=%d\n",
+ ssp.data_bits, ssp.stop_bits, ssp.parity, ssp.speed);
+ qemu_chr_ioctl(s->serial2, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
+}
+
+static void scscr2_changed(SH7750State * s)
+{
+ if (s->scscr2 & (SH7750_SCSCR_TE | SH7750_SCSCR_RE)) {
+ if (!s->serial2) {
+ fprintf(stderr, "serial port 2 not bound to anything\n");
+ assert(0);
+ }
+ serial2_update_parameters(s);
+ }
+}
+
+static void init_serial2(SH7750State * s, int serial_nb)
+{
+ CharDriverState *chr;
+
+ s->scfsr2 = 0x0060;
+
+ chr = serial_hds[serial_nb];
+ if (!chr) {
+ fprintf(stderr,
+ "no serial port associated to SH7750 second serial port\n");
+ return;
+ }
+
+ s->serial2 = chr;
+ qemu_chr_add_read_handler(chr, serial2_can_receive,
+ serial2_receive, s);
+ qemu_chr_add_event_handler(chr, serial2_event);
+}
+
+static void init_serial_ports(SH7750State * s)
+{
+ init_serial1(s, 0);
+ init_serial2(s, 1);
+}
+
+/**********************************************************************
+ I/O ports
+**********************************************************************/
+
+int sh7750_register_io_device(SH7750State * s, sh7750_io_device * device)
+{
+ int i;
+
+ for (i = 0; i < NB_DEVICES; i++) {
+ if (s->devices[i] == NULL) {
+ s->devices[i] = device;
+ return 0;
+ }
+ }
+ return -1;
+}
+
+static uint16_t portdir(uint32_t v)
+{
+#define EVENPORTMASK(n) ((v & (1<<((n)<<1))) >> (n))
+ return
+ EVENPORTMASK(15) | EVENPORTMASK(14) | EVENPORTMASK(13) |
+ EVENPORTMASK(12) | EVENPORTMASK(11) | EVENPORTMASK(10) |
+ EVENPORTMASK(9) | EVENPORTMASK(8) | EVENPORTMASK(7) |
+ EVENPORTMASK(6) | EVENPORTMASK(5) | EVENPORTMASK(4) |
+ EVENPORTMASK(3) | EVENPORTMASK(2) | EVENPORTMASK(1) |
+ EVENPORTMASK(0);
+}
+
+static uint16_t portpullup(uint32_t v)
+{
+#define ODDPORTMASK(n) ((v & (1<<(((n)<<1)+1))) >> (n))
+ return
+ ODDPORTMASK(15) | ODDPORTMASK(14) | ODDPORTMASK(13) |
+ ODDPORTMASK(12) | ODDPORTMASK(11) | ODDPORTMASK(10) |
+ ODDPORTMASK(9) | ODDPORTMASK(8) | ODDPORTMASK(7) | ODDPORTMASK(6) |
+ ODDPORTMASK(5) | ODDPORTMASK(4) | ODDPORTMASK(3) | ODDPORTMASK(2) |
+ ODDPORTMASK(1) | ODDPORTMASK(0);
+}
+
+static uint16_t porta_lines(SH7750State * s)
+{
+ return (s->portdira & s->pdtra) | /* CPU */
+ (s->periph_portdira & s->periph_pdtra) | /* Peripherals */
+ (~(s->portdira | s->periph_portdira) & s->portpullupa); /* Pullups */
+}
+
+static uint16_t portb_lines(SH7750State * s)
+{
+ return (s->portdirb & s->pdtrb) | /* CPU */
+ (s->periph_portdirb & s->periph_pdtrb) | /* Peripherals */
+ (~(s->portdirb | s->periph_portdirb) & s->portpullupb); /* Pullups */
+}
+
+static void gen_port_interrupts(SH7750State * s)
+{
+ /* XXXXX interrupts not generated */
+}
+
+static void porta_changed(SH7750State * s, uint16_t prev)
+{
+ uint16_t currenta, changes;
+ int i, r = 0;
+
+#if 0
+ fprintf(stderr, "porta changed from 0x%04x to 0x%04x\n",
+ prev, porta_lines(s));
+ fprintf(stderr, "pdtra=0x%04x, pctra=0x%08x\n", s->pdtra, s->pctra);
+#endif
+ currenta = porta_lines(s);
+ if (currenta == prev)
+ return;
+ changes = currenta ^ prev;
+
+ for (i = 0; i < NB_DEVICES; i++) {
+ if (s->devices[i] && (s->devices[i]->portamask_trigger & changes)) {
+ r |= s->devices[i]->port_change_cb(currenta, portb_lines(s),
+ &s->periph_pdtra,
+ &s->periph_portdira,
+ &s->periph_pdtrb,
+ &s->periph_portdirb);
+ }
+ }
+
+ if (r)
+ gen_port_interrupts(s);
+}
+
+static void portb_changed(SH7750State * s, uint16_t prev)
+{
+ uint16_t currentb, changes;
+ int i, r = 0;
+
+ currentb = portb_lines(s);
+ if (currentb == prev)
+ return;
+ changes = currentb ^ prev;
+
+ for (i = 0; i < NB_DEVICES; i++) {
+ if (s->devices[i] && (s->devices[i]->portbmask_trigger & changes)) {
+ r |= s->devices[i]->port_change_cb(portb_lines(s), currentb,
+ &s->periph_pdtra,
+ &s->periph_portdira,
+ &s->periph_pdtrb,
+ &s->periph_portdirb);
+ }
+ }
+
+ if (r)
+ gen_port_interrupts(s);
+}
+
+/**********************************************************************
+ Memory
+**********************************************************************/
+
+static void error_access(const char *kind, target_phys_addr_t addr)
+{
+ fprintf(stderr, "%s to %s (0x%08x) not supported\n",
+ kind, regname(addr), addr);
+}
+
+static void ignore_access(const char *kind, target_phys_addr_t addr)
+{
+ fprintf(stderr, "%s to %s (0x%08x) ignored\n",
+ kind, regname(addr), addr);
+}
+
+static uint32_t sh7750_mem_readb(void *opaque, target_phys_addr_t addr)
+{
+ SH7750State *s = opaque;
+ uint8_t r;
+
+ switch (addr) {
+ case SH7750_SCSSR1_A7:
+ r = s->scssr1;
+ s->scssr1_read |= r;
+ return s->scssr1;
+ case SH7750_SCRDR1_A7:
+ s->scssr1 &= ~SH7750_SCSSR1_RDRF;
+ return s->scrdr1;
+ default:
+ error_access("byte read", addr);
+ assert(0);
+ }
+}
+
+static uint32_t sh7750_mem_readw(void *opaque, target_phys_addr_t addr)
+{
+ SH7750State *s = opaque;
+ uint16_t r;
+
+ switch (addr) {
+ case SH7750_RFCR_A7:
+ fprintf(stderr,
+ "Read access to refresh count register, incrementing\n");
+ return s->rfcr++;
+ case SH7750_TCR0_A7:
+ return s->tcr0;
+ case SH7750_SCLSR2_A7:
+ /* Read and clear overflow bit */
+ r = s->sclsr2;
+ s->sclsr2 = 0;
+ return r;
+ case SH7750_SCSFR2_A7:
+ return s->scfsr2;
+ case SH7750_PDTRA_A7:
+ return porta_lines(s);
+ case SH7750_PDTRB_A7:
+ return portb_lines(s);
+ default:
+ error_access("word read", addr);
+ assert(0);
+ }
+}
+
+static uint32_t sh7750_mem_readl(void *opaque, target_phys_addr_t addr)
+{
+ SH7750State *s = opaque;
+
+ switch (addr) {
+ case SH7750_MMUCR_A7:
+ return s->cpu->mmucr;
+ case SH7750_PTEH_A7:
+ return s->cpu->pteh;
+ case SH7750_PTEL_A7:
+ return s->cpu->ptel;
+ case SH7750_TTB_A7:
+ return s->cpu->ttb;
+ case SH7750_TEA_A7:
+ return s->cpu->tea;
+ case SH7750_TRA_A7:
+ return s->cpu->tra;
+ case SH7750_EXPEVT_A7:
+ return s->cpu->expevt;
+ case SH7750_INTEVT_A7:
+ return s->cpu->intevt;
+ case SH7750_CCR_A7:
+ return s->ccr;
+ case 0x1f000030: /* Processor version PVR */
+ return 0x00050000; /* SH7750R */
+ case 0x1f000040: /* Processor version CVR */
+ return 0x00110000; /* Minimum caches */
+ case 0x1f000044: /* Processor version PRR */
+ return 0x00000100; /* SH7750R */
+ default:
+ error_access("long read", addr);
+ assert(0);
+ }
+}
+
+static void sh7750_mem_writeb(void *opaque, target_phys_addr_t addr,
+ uint32_t mem_value)
+{
+ SH7750State *s = opaque;
+
+ switch (addr) {
+ /* PRECHARGE ? XXXXX */
+ case SH7750_PRECHARGE0_A7:
+ case SH7750_PRECHARGE1_A7:
+ ignore_access("byte write", addr);
+ return;
+ case SH7750_SCBRR2_A7:
+ s->scbrr2 = mem_value;
+ return;
+ case SH7750_TSTR_A7:
+ s->tstr = mem_value;
+ timer_start_changed(s);
+ return;
+ case SH7750_SCSCR1_A7:
+ s->scscr1 = mem_value;
+ scscr1_changed(s);
+ return;
+ case SH7750_SCSMR1_A7:
+ s->scsmr1 = mem_value;
+ return;
+ case SH7750_SCBRR1_A7:
+ s->scbrr1 = mem_value;
+ return;
+ case SH7750_SCTDR1_A7:
+ s->scssr1 &= ~SH7750_SCSSR1_TEND;
+ s->sctdr1 = mem_value;
+ return;
+ case SH7750_SCSSR1_A7:
+ serial1_change_scssr1(s, mem_value);
+ return;
+ default:
+ error_access("byte write", addr);
+ assert(0);
+ }
+}
+
+static void sh7750_mem_writew(void *opaque, target_phys_addr_t addr,
+ uint32_t mem_value)
+{
+ SH7750State *s = opaque;
+ uint16_t temp;
+
+ switch (addr) {
+ /* SDRAM controller */
+ case SH7750_SCBRR1_A7:
+ case SH7750_SCBRR2_A7:
+ case SH7750_BCR2_A7:
+ case SH7750_BCR3_A7:
+ case SH7750_RTCOR_A7:
+ case SH7750_RTCNT_A7:
+ case SH7750_RTCSR_A7:
+ ignore_access("word write", addr);
+ return;
+ /* IO ports */
+ case SH7750_PDTRA_A7:
+ temp = porta_lines(s);
+ s->pdtra = mem_value;
+ porta_changed(s, temp);
+ return;
+ case SH7750_PDTRB_A7:
+ temp = portb_lines(s);
+ s->pdtrb = mem_value;
+ portb_changed(s, temp);
+ return;
+ case SH7750_RFCR_A7:
+ fprintf(stderr, "Write access to refresh count register\n");
+ s->rfcr = mem_value;
+ return;
+ case SH7750_SCLSR2_A7:
+ s->sclsr2 = mem_value;
+ return;
+ case SH7750_SCSCR2_A7:
+ s->scscr2 = mem_value;
+ scscr2_changed(s);
+ return;
+ case SH7750_SCFCR2_A7:
+ s->scfcr2 = mem_value;
+ return;
+ case SH7750_SCSMR2_A7:
+ s->scsmr2 = mem_value;
+ return;
+ case SH7750_TCR0_A7:
+ s->tcr0 = mem_value;
+ return;
+ case SH7750_GPIOIC_A7:
+ s->gpioic = mem_value;
+ if (mem_value != 0) {
+ fprintf(stderr, "I/O interrupts not implemented\n");
+ assert(0);
+ }
+ return;
+ default:
+ error_access("word write", addr);
+ assert(0);
+ }
+}
+
+static void sh7750_mem_writel(void *opaque, target_phys_addr_t addr,
+ uint32_t mem_value)
+{
+ SH7750State *s = opaque;
+ uint16_t temp;
+
+ switch (addr) {
+ /* SDRAM controller */
+ case SH7750_BCR1_A7:
+ case SH7750_BCR4_A7:
+ case SH7750_WCR1_A7:
+ case SH7750_WCR2_A7:
+ case SH7750_WCR3_A7:
+ case SH7750_MCR_A7:
+ ignore_access("long write", addr);
+ return;
+ /* IO ports */
+ case SH7750_PCTRA_A7:
+ temp = porta_lines(s);
+ s->pctra = mem_value;
+ s->portdira = portdir(mem_value);
+ s->portpullupa = portpullup(mem_value);
+ porta_changed(s, temp);
+ return;
+ case SH7750_PCTRB_A7:
+ temp = portb_lines(s);
+ s->pctrb = mem_value;
+ s->portdirb = portdir(mem_value);
+ s->portpullupb = portpullup(mem_value);
+ portb_changed(s, temp);
+ return;
+ case SH7750_TCNT0_A7:
+ s->tcnt0 = mem_value & 0xf;
+ return;
+ case SH7750_MMUCR_A7:
+ s->cpu->mmucr = mem_value;
+ return;
+ case SH7750_PTEH_A7:
+ s->cpu->pteh = mem_value;
+ return;
+ case SH7750_PTEL_A7:
+ s->cpu->ptel = mem_value;
+ return;
+ case SH7750_TTB_A7:
+ s->cpu->ttb = mem_value;
+ return;
+ case SH7750_TEA_A7:
+ s->cpu->tea = mem_value;
+ return;
+ case SH7750_TRA_A7:
+ s->cpu->tra = mem_value & 0x000007ff;
+ return;
+ case SH7750_EXPEVT_A7:
+ s->cpu->expevt = mem_value & 0x000007ff;
+ return;
+ case SH7750_INTEVT_A7:
+ s->cpu->intevt = mem_value & 0x000007ff;
+ return;
+ case SH7750_CCR_A7:
+ s->ccr = mem_value;
+ return;
+ default:
+ error_access("long write", addr);
+ assert(0);
+ }
+}
+
+static CPUReadMemoryFunc *sh7750_mem_read[] = {
+ sh7750_mem_readb,
+ sh7750_mem_readw,
+ sh7750_mem_readl
+};
+
+static CPUWriteMemoryFunc *sh7750_mem_write[] = {
+ sh7750_mem_writeb,
+ sh7750_mem_writew,
+ sh7750_mem_writel
+};
+
+SH7750State *sh7750_init(CPUSH4State * cpu)
+{
+ SH7750State *s;
+ int sh7750_io_memory;
+
+ s = qemu_mallocz(sizeof(SH7750State));
+ s->cpu = cpu;
+ s->periph_freq = 60000000; /* 60MHz */
+ sh7750_io_memory = cpu_register_io_memory(0,
+ sh7750_mem_read,
+ sh7750_mem_write, s);
+ cpu_register_physical_memory(0x1c000000, 0x04000000, sh7750_io_memory);
+ init_timers(s);
+ init_serial_ports(s);
+ return s;
+}
diff --git a/hw/sh7750_regnames.c b/hw/sh7750_regnames.c
new file mode 100644
index 0000000000..5fcb0d6cca
--- /dev/null
+++ b/hw/sh7750_regnames.c
@@ -0,0 +1,128 @@
+#include "vl.h"
+#include "sh7750_regs.h"
+
+#define REGNAME(r) {r, #r},
+
+typedef struct {
+ uint32_t regaddr;
+ const char *regname;
+} regname_t;
+
+static regname_t regnames[] = {
+ REGNAME(SH7750_PTEH_A7)
+ REGNAME(SH7750_PTEL_A7)
+ REGNAME(SH7750_PTEA_A7)
+ REGNAME(SH7750_TTB_A7)
+ REGNAME(SH7750_TEA_A7)
+ REGNAME(SH7750_MMUCR_A7)
+ REGNAME(SH7750_CCR_A7)
+ REGNAME(SH7750_QACR0_A7)
+ REGNAME(SH7750_QACR1_A7)
+ REGNAME(SH7750_TRA_A7)
+ REGNAME(SH7750_EXPEVT_A7)
+ REGNAME(SH7750_INTEVT_A7)
+ REGNAME(SH7750_STBCR_A7)
+ REGNAME(SH7750_STBCR2_A7)
+ REGNAME(SH7750_FRQCR_A7)
+ REGNAME(SH7750_WTCNT_A7)
+ REGNAME(SH7750_WTCSR_A7)
+ REGNAME(SH7750_R64CNT_A7)
+ REGNAME(SH7750_RSECCNT_A7)
+ REGNAME(SH7750_RMINCNT_A7)
+ REGNAME(SH7750_RHRCNT_A7)
+ REGNAME(SH7750_RWKCNT_A7)
+ REGNAME(SH7750_RDAYCNT_A7)
+ REGNAME(SH7750_RMONCNT_A7)
+ REGNAME(SH7750_RYRCNT_A7)
+ REGNAME(SH7750_RSECAR_A7)
+ REGNAME(SH7750_RMINAR_A7)
+ REGNAME(SH7750_RHRAR_A7)
+ REGNAME(SH7750_RWKAR_A7)
+ REGNAME(SH7750_RDAYAR_A7)
+ REGNAME(SH7750_RMONAR_A7)
+ REGNAME(SH7750_RCR1_A7)
+ REGNAME(SH7750_RCR2_A7)
+ REGNAME(SH7750_TOCR_A7)
+ REGNAME(SH7750_TSTR_A7)
+ REGNAME(SH7750_TCOR0_A7)
+ REGNAME(SH7750_TCOR1_A7)
+ REGNAME(SH7750_TCOR2_A7)
+ REGNAME(SH7750_TCNT0_A7)
+ REGNAME(SH7750_TCNT1_A7)
+ REGNAME(SH7750_TCNT2_A7)
+ REGNAME(SH7750_TCR0_A7)
+ REGNAME(SH7750_TCR1_A7)
+ REGNAME(SH7750_TCR2_A7)
+ REGNAME(SH7750_TCPR2_A7)
+ REGNAME(SH7750_BCR1_A7)
+ REGNAME(SH7750_BCR2_A7)
+ REGNAME(SH7750_WCR1_A7)
+ REGNAME(SH7750_WCR2_A7)
+ REGNAME(SH7750_WCR3_A7)
+ REGNAME(SH7750_MCR_A7)
+ REGNAME(SH7750_PCR_A7)
+ REGNAME(SH7750_RTCSR_A7)
+ REGNAME(SH7750_RTCNT_A7)
+ REGNAME(SH7750_RTCOR_A7)
+ REGNAME(SH7750_RFCR_A7)
+ REGNAME(SH7750_SAR0_A7)
+ REGNAME(SH7750_SAR1_A7)
+ REGNAME(SH7750_SAR2_A7)
+ REGNAME(SH7750_SAR3_A7)
+ REGNAME(SH7750_DAR0_A7)
+ REGNAME(SH7750_DAR1_A7)
+ REGNAME(SH7750_DAR2_A7)
+ REGNAME(SH7750_DAR3_A7)
+ REGNAME(SH7750_DMATCR0_A7)
+ REGNAME(SH7750_DMATCR1_A7)
+ REGNAME(SH7750_DMATCR2_A7)
+ REGNAME(SH7750_DMATCR3_A7)
+ REGNAME(SH7750_CHCR0_A7)
+ REGNAME(SH7750_CHCR1_A7)
+ REGNAME(SH7750_CHCR2_A7)
+ REGNAME(SH7750_CHCR3_A7)
+ REGNAME(SH7750_DMAOR_A7)
+ REGNAME(SH7750_SCRDR1_A7)
+ REGNAME(SH7750_SCRDR2_A7)
+ REGNAME(SH7750_SCTDR1_A7)
+ REGNAME(SH7750_SCTDR2_A7)
+ REGNAME(SH7750_SCSMR1_A7)
+ REGNAME(SH7750_SCSMR2_A7)
+ REGNAME(SH7750_SCSCR1_A7)
+ REGNAME(SH7750_SCSCR2_A7)
+ REGNAME(SH7750_SCSSR1_A7)
+ REGNAME(SH7750_SCSFR2_A7)
+ REGNAME(SH7750_SCSPTR1_A7)
+ REGNAME(SH7750_SCSPTR2_A7)
+ REGNAME(SH7750_SCBRR1_A7)
+ REGNAME(SH7750_SCBRR2_A7)
+ REGNAME(SH7750_SCFCR2_A7)
+ REGNAME(SH7750_SCFDR2_A7)
+ REGNAME(SH7750_SCLSR2_A7)
+ REGNAME(SH7750_SCSCMR1_A7)
+ REGNAME(SH7750_PCTRA_A7)
+ REGNAME(SH7750_PDTRA_A7)
+ REGNAME(SH7750_PCTRB_A7)
+ REGNAME(SH7750_PDTRB_A7)
+ REGNAME(SH7750_GPIOIC_A7)
+ REGNAME(SH7750_ICR_A7)
+ REGNAME(SH7750_IPRA_A7)
+ REGNAME(SH7750_IPRB_A7)
+ REGNAME(SH7750_IPRC_A7)
+ REGNAME(SH7750_BCR3_A7)
+ REGNAME(SH7750_BCR4_A7)
+ REGNAME(SH7750_PRECHARGE0_A7)
+ REGNAME(SH7750_PRECHARGE1_A7) {(uint32_t) - 1, 0}
+};
+
+const char *regname(uint32_t addr)
+{
+ unsigned int i;
+
+ for (i = 0; regnames[i].regaddr != (uint32_t) - 1; i++) {
+ if (regnames[i].regaddr == addr)
+ return regnames[i].regname;
+ }
+
+ return "<unknown reg>";
+}
diff --git a/hw/sh7750_regnames.h b/hw/sh7750_regnames.h
new file mode 100644
index 0000000000..7463709b4c
--- /dev/null
+++ b/hw/sh7750_regnames.h
@@ -0,0 +1,6 @@
+#ifndef _SH7750_REGNAMES_H
+#define _SH7750_REGNAMES_H
+
+const char *regname(uint32_t addr);
+
+#endif /* _SH7750_REGNAMES_H */
diff --git a/hw/sh7750_regs.h b/hw/sh7750_regs.h
new file mode 100644
index 0000000000..44ae95be2b
--- /dev/null
+++ b/hw/sh7750_regs.h
@@ -0,0 +1,1623 @@
+/*
+ * SH-7750 memory-mapped registers
+ * This file based on information provided in the following document:
+ * "Hitachi SuperH (tm) RISC engine. SH7750 Series (SH7750, SH7750S)
+ * Hardware Manual"
+ * Document Number ADE-602-124C, Rev. 4.0, 4/21/00, Hitachi Ltd.
+ *
+ * Copyright (C) 2001 OKTET Ltd., St.-Petersburg, Russia
+ * Author: Alexandra Kossovsky <sasha@oktet.ru>
+ * Victor V. Vengerov <vvv@oktet.ru>
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rtems.com/license/LICENSE.
+ *
+ * @(#) sh7750_regs.h,v 1.2.4.1 2003/09/04 18:46:00 joel Exp
+ */
+
+#ifndef __SH7750_REGS_H__
+#define __SH7750_REGS_H__
+
+/*
+ * All register has 2 addresses: in 0xff000000 - 0xffffffff (P4 address) and
+ * in 0x1f000000 - 0x1fffffff (area 7 address)
+ */
+#define SH7750_P4_BASE 0xff000000 /* Accessable only in
+ priveleged mode */
+#define SH7750_A7_BASE 0x1f000000 /* Accessable only using TLB */
+
+#define SH7750_P4_REG32(ofs) (SH7750_P4_BASE + (ofs))
+#define SH7750_A7_REG32(ofs) (SH7750_A7_BASE + (ofs))
+
+/*
+ * MMU Registers
+ */
+
+/* Page Table Entry High register - PTEH */
+#define SH7750_PTEH_REGOFS 0x000000 /* offset */
+#define SH7750_PTEH SH7750_P4_REG32(SH7750_PTEH_REGOFS)
+#define SH7750_PTEH_A7 SH7750_A7_REG32(SH7750_PTEH_REGOFS)
+#define SH7750_PTEH_VPN 0xfffffd00 /* Virtual page number */
+#define SH7750_PTEH_VPN_S 10
+#define SH7750_PTEH_ASID 0x000000ff /* Address space identifier */
+#define SH7750_PTEH_ASID_S 0
+
+/* Page Table Entry Low register - PTEL */
+#define SH7750_PTEL_REGOFS 0x000004 /* offset */
+#define SH7750_PTEL SH7750_P4_REG32(SH7750_PTEL_REGOFS)
+#define SH7750_PTEL_A7 SH7750_A7_REG32(SH7750_PTEL_REGOFS)
+#define SH7750_PTEL_PPN 0x1ffffc00 /* Physical page number */
+#define SH7750_PTEL_PPN_S 10
+#define SH7750_PTEL_V 0x00000100 /* Validity (0-entry is invalid) */
+#define SH7750_PTEL_SZ1 0x00000080 /* Page size bit 1 */
+#define SH7750_PTEL_SZ0 0x00000010 /* Page size bit 0 */
+#define SH7750_PTEL_SZ_1KB 0x00000000 /* 1-kbyte page */
+#define SH7750_PTEL_SZ_4KB 0x00000010 /* 4-kbyte page */
+#define SH7750_PTEL_SZ_64KB 0x00000080 /* 64-kbyte page */
+#define SH7750_PTEL_SZ_1MB 0x00000090 /* 1-Mbyte page */
+#define SH7750_PTEL_PR 0x00000060 /* Protection Key Data */
+#define SH7750_PTEL_PR_ROPO 0x00000000 /* read-only in priv mode */
+#define SH7750_PTEL_PR_RWPO 0x00000020 /* read-write in priv mode */
+#define SH7750_PTEL_PR_ROPU 0x00000040 /* read-only in priv or user mode */
+#define SH7750_PTEL_PR_RWPU 0x00000060 /* read-write in priv or user mode */
+#define SH7750_PTEL_C 0x00000008 /* Cacheability
+ (0 - page not cacheable) */
+#define SH7750_PTEL_D 0x00000004 /* Dirty bit (1 - write has been
+ performed to a page) */
+#define SH7750_PTEL_SH 0x00000002 /* Share Status bit (1 - page are
+ shared by processes) */
+#define SH7750_PTEL_WT 0x00000001 /* Write-through bit, specifies the
+ cache write mode:
+ 0 - Copy-back mode
+ 1 - Write-through mode */
+
+/* Page Table Entry Assistance register - PTEA */
+#define SH7750_PTEA_REGOFS 0x000034 /* offset */
+#define SH7750_PTEA SH7750_P4_REG32(SH7750_PTEA_REGOFS)
+#define SH7750_PTEA_A7 SH7750_A7_REG32(SH7750_PTEA_REGOFS)
+#define SH7750_PTEA_TC 0x00000008 /* Timing Control bit
+ 0 - use area 5 wait states
+ 1 - use area 6 wait states */
+#define SH7750_PTEA_SA 0x00000007 /* Space Attribute bits: */
+#define SH7750_PTEA_SA_UNDEF 0x00000000 /* 0 - undefined */
+#define SH7750_PTEA_SA_IOVAR 0x00000001 /* 1 - variable-size I/O space */
+#define SH7750_PTEA_SA_IO8 0x00000002 /* 2 - 8-bit I/O space */
+#define SH7750_PTEA_SA_IO16 0x00000003 /* 3 - 16-bit I/O space */
+#define SH7750_PTEA_SA_CMEM8 0x00000004 /* 4 - 8-bit common memory space */
+#define SH7750_PTEA_SA_CMEM16 0x00000005 /* 5 - 16-bit common memory space */
+#define SH7750_PTEA_SA_AMEM8 0x00000006 /* 6 - 8-bit attr memory space */
+#define SH7750_PTEA_SA_AMEM16 0x00000007 /* 7 - 16-bit attr memory space */
+
+
+/* Translation table base register */
+#define SH7750_TTB_REGOFS 0x000008 /* offset */
+#define SH7750_TTB SH7750_P4_REG32(SH7750_TTB_REGOFS)
+#define SH7750_TTB_A7 SH7750_A7_REG32(SH7750_TTB_REGOFS)
+
+/* TLB exeption address register - TEA */
+#define SH7750_TEA_REGOFS 0x00000c /* offset */
+#define SH7750_TEA SH7750_P4_REG32(SH7750_TEA_REGOFS)
+#define SH7750_TEA_A7 SH7750_A7_REG32(SH7750_TEA_REGOFS)
+
+/* MMU control register - MMUCR */
+#define SH7750_MMUCR_REGOFS 0x000010 /* offset */
+#define SH7750_MMUCR SH7750_P4_REG32(SH7750_MMUCR_REGOFS)
+#define SH7750_MMUCR_A7 SH7750_A7_REG32(SH7750_MMUCR_REGOFS)
+#define SH7750_MMUCR_AT 0x00000001 /* Address translation bit */
+#define SH7750_MMUCR_TI 0x00000004 /* TLB invalidate */
+#define SH7750_MMUCR_SV 0x00000100 /* Single Virtual Mode bit */
+#define SH7750_MMUCR_SQMD 0x00000200 /* Store Queue Mode bit */
+#define SH7750_MMUCR_URC 0x0000FC00 /* UTLB Replace Counter */
+#define SH7750_MMUCR_URC_S 10
+#define SH7750_MMUCR_URB 0x00FC0000 /* UTLB Replace Boundary */
+#define SH7750_MMUCR_URB_S 18
+#define SH7750_MMUCR_LRUI 0xFC000000 /* Least Recently Used ITLB */
+#define SH7750_MMUCR_LRUI_S 26
+
+
+
+
+/*
+ * Cache registers
+ * IC -- instructions cache
+ * OC -- operand cache
+ */
+
+/* Cache Control Register - CCR */
+#define SH7750_CCR_REGOFS 0x00001c /* offset */
+#define SH7750_CCR SH7750_P4_REG32(SH7750_CCR_REGOFS)
+#define SH7750_CCR_A7 SH7750_A7_REG32(SH7750_CCR_REGOFS)
+
+#define SH7750_CCR_IIX 0x00008000 /* IC index enable bit */
+#define SH7750_CCR_ICI 0x00000800 /* IC invalidation bit:
+ set it to clear IC */
+#define SH7750_CCR_ICE 0x00000100 /* IC enable bit */
+#define SH7750_CCR_OIX 0x00000080 /* OC index enable bit */
+#define SH7750_CCR_ORA 0x00000020 /* OC RAM enable bit
+ if you set OCE = 0,
+ you should set ORA = 0 */
+#define SH7750_CCR_OCI 0x00000008 /* OC invalidation bit */
+#define SH7750_CCR_CB 0x00000004 /* Copy-back bit for P1 area */
+#define SH7750_CCR_WT 0x00000002 /* Write-through bit for P0,U0,P3 area */
+#define SH7750_CCR_OCE 0x00000001 /* OC enable bit */
+
+/* Queue address control register 0 - QACR0 */
+#define SH7750_QACR0_REGOFS 0x000038 /* offset */
+#define SH7750_QACR0 SH7750_P4_REG32(SH7750_QACR0_REGOFS)
+#define SH7750_QACR0_A7 SH7750_A7_REG32(SH7750_QACR0_REGOFS)
+
+/* Queue address control register 1 - QACR1 */
+#define SH7750_QACR1_REGOFS 0x00003c /* offset */
+#define SH7750_QACR1 SH7750_P4_REG32(SH7750_QACR1_REGOFS)
+#define SH7750_QACR1_A7 SH7750_A7_REG32(SH7750_QACR1_REGOFS)
+
+
+/*
+ * Exeption-related registers
+ */
+
+/* Immediate data for TRAPA instuction - TRA */
+#define SH7750_TRA_REGOFS 0x000020 /* offset */
+#define SH7750_TRA SH7750_P4_REG32(SH7750_TRA_REGOFS)
+#define SH7750_TRA_A7 SH7750_A7_REG32(SH7750_TRA_REGOFS)
+
+#define SH7750_TRA_IMM 0x000003fd /* Immediate data operand */
+#define SH7750_TRA_IMM_S 2
+
+/* Exeption event register - EXPEVT */
+#define SH7750_EXPEVT_REGOFS 0x000024
+#define SH7750_EXPEVT SH7750_P4_REG32(SH7750_EXPEVT_REGOFS)
+#define SH7750_EXPEVT_A7 SH7750_A7_REG32(SH7750_EXPEVT_REGOFS)
+
+#define SH7750_EXPEVT_EX 0x00000fff /* Exeption code */
+#define SH7750_EXPEVT_EX_S 0
+
+/* Interrupt event register */
+#define SH7750_INTEVT_REGOFS 0x000028
+#define SH7750_INTEVT SH7750_P4_REG32(SH7750_INTEVT_REGOFS)
+#define SH7750_INTEVT_A7 SH7750_A7_REG32(SH7750_INTEVT_REGOFS)
+#define SH7750_INTEVT_EX 0x00000fff /* Exeption code */
+#define SH7750_INTEVT_EX_S 0
+
+/*
+ * Exception/interrupt codes
+ */
+#define SH7750_EVT_TO_NUM(evt) ((evt) >> 5)
+
+/* Reset exception category */
+#define SH7750_EVT_POWER_ON_RST 0x000 /* Power-on reset */
+#define SH7750_EVT_MANUAL_RST 0x020 /* Manual reset */
+#define SH7750_EVT_TLB_MULT_HIT 0x140 /* TLB multiple-hit exception */
+
+/* General exception category */
+#define SH7750_EVT_USER_BREAK 0x1E0 /* User break */
+#define SH7750_EVT_IADDR_ERR 0x0E0 /* Instruction address error */
+#define SH7750_EVT_TLB_READ_MISS 0x040 /* ITLB miss exception /
+ DTLB miss exception (read) */
+#define SH7750_EVT_TLB_READ_PROTV 0x0A0 /* ITLB protection violation /
+ DTLB protection violation (read) */
+#define SH7750_EVT_ILLEGAL_INSTR 0x180 /* General Illegal Instruction
+ exception */
+#define SH7750_EVT_SLOT_ILLEGAL_INSTR 0x1A0 /* Slot Illegal Instruction
+ exception */
+#define SH7750_EVT_FPU_DISABLE 0x800 /* General FPU disable exception */
+#define SH7750_EVT_SLOT_FPU_DISABLE 0x820 /* Slot FPU disable exception */
+#define SH7750_EVT_DATA_READ_ERR 0x0E0 /* Data address error (read) */
+#define SH7750_EVT_DATA_WRITE_ERR 0x100 /* Data address error (write) */
+#define SH7750_EVT_DTLB_WRITE_MISS 0x060 /* DTLB miss exception (write) */
+#define SH7750_EVT_DTLB_WRITE_PROTV 0x0C0 /* DTLB protection violation
+ exception (write) */
+#define SH7750_EVT_FPU_EXCEPTION 0x120 /* FPU exception */
+#define SH7750_EVT_INITIAL_PGWRITE 0x080 /* Initial Page Write exception */
+#define SH7750_EVT_TRAPA 0x160 /* Unconditional trap (TRAPA) */
+
+/* Interrupt exception category */
+#define SH7750_EVT_NMI 0x1C0 /* Non-maskable interrupt */
+#define SH7750_EVT_IRQ0 0x200 /* External Interrupt 0 */
+#define SH7750_EVT_IRQ1 0x220 /* External Interrupt 1 */
+#define SH7750_EVT_IRQ2 0x240 /* External Interrupt 2 */
+#define SH7750_EVT_IRQ3 0x260 /* External Interrupt 3 */
+#define SH7750_EVT_IRQ4 0x280 /* External Interrupt 4 */
+#define SH7750_EVT_IRQ5 0x2A0 /* External Interrupt 5 */
+#define SH7750_EVT_IRQ6 0x2C0 /* External Interrupt 6 */
+#define SH7750_EVT_IRQ7 0x2E0 /* External Interrupt 7 */
+#define SH7750_EVT_IRQ8 0x300 /* External Interrupt 8 */
+#define SH7750_EVT_IRQ9 0x320 /* External Interrupt 9 */
+#define SH7750_EVT_IRQA 0x340 /* External Interrupt A */
+#define SH7750_EVT_IRQB 0x360 /* External Interrupt B */
+#define SH7750_EVT_IRQC 0x380 /* External Interrupt C */
+#define SH7750_EVT_IRQD 0x3A0 /* External Interrupt D */
+#define SH7750_EVT_IRQE 0x3C0 /* External Interrupt E */
+
+/* Peripheral Module Interrupts - Timer Unit (TMU) */
+#define SH7750_EVT_TUNI0 0x400 /* TMU Underflow Interrupt 0 */
+#define SH7750_EVT_TUNI1 0x420 /* TMU Underflow Interrupt 1 */
+#define SH7750_EVT_TUNI2 0x440 /* TMU Underflow Interrupt 2 */
+#define SH7750_EVT_TICPI2 0x460 /* TMU Input Capture Interrupt 2 */
+
+/* Peripheral Module Interrupts - Real-Time Clock (RTC) */
+#define SH7750_EVT_RTC_ATI 0x480 /* Alarm Interrupt Request */
+#define SH7750_EVT_RTC_PRI 0x4A0 /* Periodic Interrupt Request */
+#define SH7750_EVT_RTC_CUI 0x4C0 /* Carry Interrupt Request */
+
+/* Peripheral Module Interrupts - Serial Communication Interface (SCI) */
+#define SH7750_EVT_SCI_ERI 0x4E0 /* Receive Error */
+#define SH7750_EVT_SCI_RXI 0x500 /* Receive Data Register Full */
+#define SH7750_EVT_SCI_TXI 0x520 /* Transmit Data Register Empty */
+#define SH7750_EVT_SCI_TEI 0x540 /* Transmit End */
+
+/* Peripheral Module Interrupts - Watchdog Timer (WDT) */
+#define SH7750_EVT_WDT_ITI 0x560 /* Interval Timer Interrupt
+ (used when WDT operates in
+ interval timer mode) */
+
+/* Peripheral Module Interrupts - Memory Refresh Unit (REF) */
+#define SH7750_EVT_REF_RCMI 0x580 /* Compare-match Interrupt */
+#define SH7750_EVT_REF_ROVI 0x5A0 /* Refresh Counter Overflow
+ interrupt */
+
+/* Peripheral Module Interrupts - Hitachi User Debug Interface (H-UDI) */
+#define SH7750_EVT_HUDI 0x600 /* UDI interrupt */
+
+/* Peripheral Module Interrupts - General-Purpose I/O (GPIO) */
+#define SH7750_EVT_GPIO 0x620 /* GPIO Interrupt */
+
+/* Peripheral Module Interrupts - DMA Controller (DMAC) */
+#define SH7750_EVT_DMAC_DMTE0 0x640 /* DMAC 0 Transfer End Interrupt */
+#define SH7750_EVT_DMAC_DMTE1 0x660 /* DMAC 1 Transfer End Interrupt */
+#define SH7750_EVT_DMAC_DMTE2 0x680 /* DMAC 2 Transfer End Interrupt */
+#define SH7750_EVT_DMAC_DMTE3 0x6A0 /* DMAC 3 Transfer End Interrupt */
+#define SH7750_EVT_DMAC_DMAE 0x6C0 /* DMAC Address Error Interrupt */
+
+/* Peripheral Module Interrupts - Serial Communication Interface with FIFO */
+/* (SCIF) */
+#define SH7750_EVT_SCIF_ERI 0x700 /* Receive Error */
+#define SH7750_EVT_SCIF_RXI 0x720 /* Receive FIFO Data Full or
+ Receive Data ready interrupt */
+#define SH7750_EVT_SCIF_BRI 0x740 /* Break or overrun error */
+#define SH7750_EVT_SCIF_TXI 0x760 /* Transmit FIFO Data Empty */
+
+/*
+ * Power Management
+ */
+#define SH7750_STBCR_REGOFS 0xC00004 /* offset */
+#define SH7750_STBCR SH7750_P4_REG32(SH7750_STBCR_REGOFS)
+#define SH7750_STBCR_A7 SH7750_A7_REG32(SH7750_STBCR_REGOFS)
+
+#define SH7750_STBCR_STBY 0x80 /* Specifies a transition to standby mode:
+ 0 - Transition to SLEEP mode on SLEEP
+ 1 - Transition to STANDBY mode on SLEEP */
+#define SH7750_STBCR_PHZ 0x40 /* State of peripheral module pins in
+ standby mode:
+ 0 - normal state
+ 1 - high-impendance state */
+
+#define SH7750_STBCR_PPU 0x20 /* Peripheral module pins pull-up controls */
+#define SH7750_STBCR_MSTP4 0x10 /* Stopping the clock supply to DMAC */
+#define SH7750_STBCR_DMAC_STP SH7750_STBCR_MSTP4
+#define SH7750_STBCR_MSTP3 0x08 /* Stopping the clock supply to SCIF */
+#define SH7750_STBCR_SCIF_STP SH7750_STBCR_MSTP3
+#define SH7750_STBCR_MSTP2 0x04 /* Stopping the clock supply to TMU */
+#define SH7750_STBCR_TMU_STP SH7750_STBCR_MSTP2
+#define SH7750_STBCR_MSTP1 0x02 /* Stopping the clock supply to RTC */
+#define SH7750_STBCR_RTC_STP SH7750_STBCR_MSTP1
+#define SH7750_STBCR_MSPT0 0x01 /* Stopping the clock supply to SCI */
+#define SH7750_STBCR_SCI_STP SH7750_STBCR_MSTP0
+
+#define SH7750_STBCR_STBY 0x80
+
+
+#define SH7750_STBCR2_REGOFS 0xC00010 /* offset */
+#define SH7750_STBCR2 SH7750_P4_REG32(SH7750_STBCR2_REGOFS)
+#define SH7750_STBCR2_A7 SH7750_A7_REG32(SH7750_STBCR2_REGOFS)
+
+#define SH7750_STBCR2_DSLP 0x80 /* Specifies transition to deep sleep mode:
+ 0 - transition to sleep or standby mode
+ as it is specified in STBY bit
+ 1 - transition to deep sleep mode on
+ execution of SLEEP instruction */
+#define SH7750_STBCR2_MSTP6 0x02 /* Stopping the clock supply to Store Queue
+ in the cache controller */
+#define SH7750_STBCR2_SQ_STP SH7750_STBCR2_MSTP6
+#define SH7750_STBCR2_MSTP5 0x01 /* Stopping the clock supply to the User
+ Break Controller (UBC) */
+#define SH7750_STBCR2_UBC_STP SH7750_STBCR2_MSTP5
+
+/*
+ * Clock Pulse Generator (CPG)
+ */
+#define SH7750_FRQCR_REGOFS 0xC00000 /* offset */
+#define SH7750_FRQCR SH7750_P4_REG32(SH7750_FRQCR_REGOFS)
+#define SH7750_FRQCR_A7 SH7750_A7_REG32(SH7750_FRQCR_REGOFS)
+
+#define SH7750_FRQCR_CKOEN 0x0800 /* Clock Output Enable
+ 0 - CKIO pin goes to HiZ/pullup
+ 1 - Clock is output from CKIO */
+#define SH7750_FRQCR_PLL1EN 0x0400 /* PLL circuit 1 enable */
+#define SH7750_FRQCR_PLL2EN 0x0200 /* PLL circuit 2 enable */
+
+#define SH7750_FRQCR_IFC 0x01C0 /* CPU clock frequency division ratio: */
+#define SH7750_FRQCR_IFCDIV1 0x0000 /* 0 - * 1 */
+#define SH7750_FRQCR_IFCDIV2 0x0040 /* 1 - * 1/2 */
+#define SH7750_FRQCR_IFCDIV3 0x0080 /* 2 - * 1/3 */
+#define SH7750_FRQCR_IFCDIV4 0x00C0 /* 3 - * 1/4 */
+#define SH7750_FRQCR_IFCDIV6 0x0100 /* 4 - * 1/6 */
+#define SH7750_FRQCR_IFCDIV8 0x0140 /* 5 - * 1/8 */
+
+#define SH7750_FRQCR_BFC 0x0038 /* Bus clock frequency division ratio: */
+#define SH7750_FRQCR_BFCDIV1 0x0000 /* 0 - * 1 */
+#define SH7750_FRQCR_BFCDIV2 0x0008 /* 1 - * 1/2 */
+#define SH7750_FRQCR_BFCDIV3 0x0010 /* 2 - * 1/3 */
+#define SH7750_FRQCR_BFCDIV4 0x0018 /* 3 - * 1/4 */
+#define SH7750_FRQCR_BFCDIV6 0x0020 /* 4 - * 1/6 */
+#define SH7750_FRQCR_BFCDIV8 0x0028 /* 5 - * 1/8 */
+
+#define SH7750_FRQCR_PFC 0x0007 /* Peripheral module clock frequency
+ division ratio: */
+#define SH7750_FRQCR_PFCDIV2 0x0000 /* 0 - * 1/2 */
+#define SH7750_FRQCR_PFCDIV3 0x0001 /* 1 - * 1/3 */
+#define SH7750_FRQCR_PFCDIV4 0x0002 /* 2 - * 1/4 */
+#define SH7750_FRQCR_PFCDIV6 0x0003 /* 3 - * 1/6 */
+#define SH7750_FRQCR_PFCDIV8 0x0004 /* 4 - * 1/8 */
+
+/*
+ * Watchdog Timer (WDT)
+ */
+
+/* Watchdog Timer Counter register - WTCNT */
+#define SH7750_WTCNT_REGOFS 0xC00008 /* offset */
+#define SH7750_WTCNT SH7750_P4_REG32(SH7750_WTCNT_REGOFS)
+#define SH7750_WTCNT_A7 SH7750_A7_REG32(SH7750_WTCNT_REGOFS)
+#define SH7750_WTCNT_KEY 0x5A00 /* When WTCNT byte register written,
+ you have to set the upper byte to
+ 0x5A */
+
+/* Watchdog Timer Control/Status register - WTCSR */
+#define SH7750_WTCSR_REGOFS 0xC0000C /* offset */
+#define SH7750_WTCSR SH7750_P4_REG32(SH7750_WTCSR_REGOFS)
+#define SH7750_WTCSR_A7 SH7750_A7_REG32(SH7750_WTCSR_REGOFS)
+#define SH7750_WTCSR_KEY 0xA500 /* When WTCSR byte register written,
+ you have to set the upper byte to
+ 0xA5 */
+#define SH7750_WTCSR_TME 0x80 /* Timer enable (1-upcount start) */
+#define SH7750_WTCSR_MODE 0x40 /* Timer Mode Select: */
+#define SH7750_WTCSR_MODE_WT 0x40 /* Watchdog Timer Mode */
+#define SH7750_WTCSR_MODE_IT 0x00 /* Interval Timer Mode */
+#define SH7750_WTCSR_RSTS 0x20 /* Reset Select: */
+#define SH7750_WTCSR_RST_MAN 0x20 /* Manual Reset */
+#define SH7750_WTCSR_RST_PWR 0x00 /* Power-on Reset */
+#define SH7750_WTCSR_WOVF 0x10 /* Watchdog Timer Overflow Flag */
+#define SH7750_WTCSR_IOVF 0x08 /* Interval Timer Overflow Flag */
+#define SH7750_WTCSR_CKS 0x07 /* Clock Select: */
+#define SH7750_WTCSR_CKS_DIV32 0x00 /* 1/32 of frequency divider 2 input */
+#define SH7750_WTCSR_CKS_DIV64 0x01 /* 1/64 */
+#define SH7750_WTCSR_CKS_DIV128 0x02 /* 1/128 */
+#define SH7750_WTCSR_CKS_DIV256 0x03 /* 1/256 */
+#define SH7750_WTCSR_CKS_DIV512 0x04 /* 1/512 */
+#define SH7750_WTCSR_CKS_DIV1024 0x05 /* 1/1024 */
+#define SH7750_WTCSR_CKS_DIV2048 0x06 /* 1/2048 */
+#define SH7750_WTCSR_CKS_DIV4096 0x07 /* 1/4096 */
+
+/*
+ * Real-Time Clock (RTC)
+ */
+/* 64-Hz Counter Register (byte, read-only) - R64CNT */
+#define SH7750_R64CNT_REGOFS 0xC80000 /* offset */
+#define SH7750_R64CNT SH7750_P4_REG32(SH7750_R64CNT_REGOFS)
+#define SH7750_R64CNT_A7 SH7750_A7_REG32(SH7750_R64CNT_REGOFS)
+
+/* Second Counter Register (byte, BCD-coded) - RSECCNT */
+#define SH7750_RSECCNT_REGOFS 0xC80004 /* offset */
+#define SH7750_RSECCNT SH7750_P4_REG32(SH7750_RSECCNT_REGOFS)
+#define SH7750_RSECCNT_A7 SH7750_A7_REG32(SH7750_RSECCNT_REGOFS)
+
+/* Minute Counter Register (byte, BCD-coded) - RMINCNT */
+#define SH7750_RMINCNT_REGOFS 0xC80008 /* offset */
+#define SH7750_RMINCNT SH7750_P4_REG32(SH7750_RMINCNT_REGOFS)
+#define SH7750_RMINCNT_A7 SH7750_A7_REG32(SH7750_RMINCNT_REGOFS)
+
+/* Hour Counter Register (byte, BCD-coded) - RHRCNT */
+#define SH7750_RHRCNT_REGOFS 0xC8000C /* offset */
+#define SH7750_RHRCNT SH7750_P4_REG32(SH7750_RHRCNT_REGOFS)
+#define SH7750_RHRCNT_A7 SH7750_A7_REG32(SH7750_RHRCNT_REGOFS)
+
+/* Day-of-Week Counter Register (byte) - RWKCNT */
+#define SH7750_RWKCNT_REGOFS 0xC80010 /* offset */
+#define SH7750_RWKCNT SH7750_P4_REG32(SH7750_RWKCNT_REGOFS)
+#define SH7750_RWKCNT_A7 SH7750_A7_REG32(SH7750_RWKCNT_REGOFS)
+
+#define SH7750_RWKCNT_SUN 0 /* Sunday */
+#define SH7750_RWKCNT_MON 1 /* Monday */
+#define SH7750_RWKCNT_TUE 2 /* Tuesday */
+#define SH7750_RWKCNT_WED 3 /* Wednesday */
+#define SH7750_RWKCNT_THU 4 /* Thursday */
+#define SH7750_RWKCNT_FRI 5 /* Friday */
+#define SH7750_RWKCNT_SAT 6 /* Saturday */
+
+/* Day Counter Register (byte, BCD-coded) - RDAYCNT */
+#define SH7750_RDAYCNT_REGOFS 0xC80014 /* offset */
+#define SH7750_RDAYCNT SH7750_P4_REG32(SH7750_RDAYCNT_REGOFS)
+#define SH7750_RDAYCNT_A7 SH7750_A7_REG32(SH7750_RDAYCNT_REGOFS)
+
+/* Month Counter Register (byte, BCD-coded) - RMONCNT */
+#define SH7750_RMONCNT_REGOFS 0xC80018 /* offset */
+#define SH7750_RMONCNT SH7750_P4_REG32(SH7750_RMONCNT_REGOFS)
+#define SH7750_RMONCNT_A7 SH7750_A7_REG32(SH7750_RMONCNT_REGOFS)
+
+/* Year Counter Register (half, BCD-coded) - RYRCNT */
+#define SH7750_RYRCNT_REGOFS 0xC8001C /* offset */
+#define SH7750_RYRCNT SH7750_P4_REG32(SH7750_RYRCNT_REGOFS)
+#define SH7750_RYRCNT_A7 SH7750_A7_REG32(SH7750_RYRCNT_REGOFS)
+
+/* Second Alarm Register (byte, BCD-coded) - RSECAR */
+#define SH7750_RSECAR_REGOFS 0xC80020 /* offset */
+#define SH7750_RSECAR SH7750_P4_REG32(SH7750_RSECAR_REGOFS)
+#define SH7750_RSECAR_A7 SH7750_A7_REG32(SH7750_RSECAR_REGOFS)
+#define SH7750_RSECAR_ENB 0x80 /* Second Alarm Enable */
+
+/* Minute Alarm Register (byte, BCD-coded) - RMINAR */
+#define SH7750_RMINAR_REGOFS 0xC80024 /* offset */
+#define SH7750_RMINAR SH7750_P4_REG32(SH7750_RMINAR_REGOFS)
+#define SH7750_RMINAR_A7 SH7750_A7_REG32(SH7750_RMINAR_REGOFS)
+#define SH7750_RMINAR_ENB 0x80 /* Minute Alarm Enable */
+
+/* Hour Alarm Register (byte, BCD-coded) - RHRAR */
+#define SH7750_RHRAR_REGOFS 0xC80028 /* offset */
+#define SH7750_RHRAR SH7750_P4_REG32(SH7750_RHRAR_REGOFS)
+#define SH7750_RHRAR_A7 SH7750_A7_REG32(SH7750_RHRAR_REGOFS)
+#define SH7750_RHRAR_ENB 0x80 /* Hour Alarm Enable */
+
+/* Day-of-Week Alarm Register (byte) - RWKAR */
+#define SH7750_RWKAR_REGOFS 0xC8002C /* offset */
+#define SH7750_RWKAR SH7750_P4_REG32(SH7750_RWKAR_REGOFS)
+#define SH7750_RWKAR_A7 SH7750_A7_REG32(SH7750_RWKAR_REGOFS)
+#define SH7750_RWKAR_ENB 0x80 /* Day-of-week Alarm Enable */
+
+#define SH7750_RWKAR_SUN 0 /* Sunday */
+#define SH7750_RWKAR_MON 1 /* Monday */
+#define SH7750_RWKAR_TUE 2 /* Tuesday */
+#define SH7750_RWKAR_WED 3 /* Wednesday */
+#define SH7750_RWKAR_THU 4 /* Thursday */
+#define SH7750_RWKAR_FRI 5 /* Friday */
+#define SH7750_RWKAR_SAT 6 /* Saturday */
+
+/* Day Alarm Register (byte, BCD-coded) - RDAYAR */
+#define SH7750_RDAYAR_REGOFS 0xC80030 /* offset */
+#define SH7750_RDAYAR SH7750_P4_REG32(SH7750_RDAYAR_REGOFS)
+#define SH7750_RDAYAR_A7 SH7750_A7_REG32(SH7750_RDAYAR_REGOFS)
+#define SH7750_RDAYAR_ENB 0x80 /* Day Alarm Enable */
+
+/* Month Counter Register (byte, BCD-coded) - RMONAR */
+#define SH7750_RMONAR_REGOFS 0xC80034 /* offset */
+#define SH7750_RMONAR SH7750_P4_REG32(SH7750_RMONAR_REGOFS)
+#define SH7750_RMONAR_A7 SH7750_A7_REG32(SH7750_RMONAR_REGOFS)
+#define SH7750_RMONAR_ENB 0x80 /* Month Alarm Enable */
+
+/* RTC Control Register 1 (byte) - RCR1 */
+#define SH7750_RCR1_REGOFS 0xC80038 /* offset */
+#define SH7750_RCR1 SH7750_P4_REG32(SH7750_RCR1_REGOFS)
+#define SH7750_RCR1_A7 SH7750_A7_REG32(SH7750_RCR1_REGOFS)
+#define SH7750_RCR1_CF 0x80 /* Carry Flag */
+#define SH7750_RCR1_CIE 0x10 /* Carry Interrupt Enable */
+#define SH7750_RCR1_AIE 0x08 /* Alarm Interrupt Enable */
+#define SH7750_RCR1_AF 0x01 /* Alarm Flag */
+
+/* RTC Control Register 2 (byte) - RCR2 */
+#define SH7750_RCR2_REGOFS 0xC8003C /* offset */
+#define SH7750_RCR2 SH7750_P4_REG32(SH7750_RCR2_REGOFS)
+#define SH7750_RCR2_A7 SH7750_A7_REG32(SH7750_RCR2_REGOFS)
+#define SH7750_RCR2_PEF 0x80 /* Periodic Interrupt Flag */
+#define SH7750_RCR2_PES 0x70 /* Periodic Interrupt Enable: */
+#define SH7750_RCR2_PES_DIS 0x00 /* Periodic Interrupt Disabled */
+#define SH7750_RCR2_PES_DIV256 0x10 /* Generated at 1/256 sec interval */
+#define SH7750_RCR2_PES_DIV64 0x20 /* Generated at 1/64 sec interval */
+#define SH7750_RCR2_PES_DIV16 0x30 /* Generated at 1/16 sec interval */
+#define SH7750_RCR2_PES_DIV4 0x40 /* Generated at 1/4 sec interval */
+#define SH7750_RCR2_PES_DIV2 0x50 /* Generated at 1/2 sec interval */
+#define SH7750_RCR2_PES_x1 0x60 /* Generated at 1 sec interval */
+#define SH7750_RCR2_PES_x2 0x70 /* Generated at 2 sec interval */
+#define SH7750_RCR2_RTCEN 0x08 /* RTC Crystal Oscillator is Operated */
+#define SH7750_RCR2_ADJ 0x04 /* 30-Second Adjastment */
+#define SH7750_RCR2_RESET 0x02 /* Frequency divider circuits are reset */
+#define SH7750_RCR2_START 0x01 /* 0 - sec, min, hr, day-of-week, month,
+ year counters are stopped
+ 1 - sec, min, hr, day-of-week, month,
+ year counters operate normally */
+
+
+/*
+ * Timer Unit (TMU)
+ */
+/* Timer Output Control Register (byte) - TOCR */
+#define SH7750_TOCR_REGOFS 0xD80000 /* offset */
+#define SH7750_TOCR SH7750_P4_REG32(SH7750_TOCR_REGOFS)
+#define SH7750_TOCR_A7 SH7750_A7_REG32(SH7750_TOCR_REGOFS)
+#define SH7750_TOCR_TCOE 0x01 /* Timer Clock Pin Control:
+ 0 - TCLK is used as external clock
+ input or input capture control
+ 1 - TCLK is used as on-chip RTC
+ output clock pin */
+
+/* Timer Start Register (byte) - TSTR */
+#define SH7750_TSTR_REGOFS 0xD80004 /* offset */
+#define SH7750_TSTR SH7750_P4_REG32(SH7750_TSTR_REGOFS)
+#define SH7750_TSTR_A7 SH7750_A7_REG32(SH7750_TSTR_REGOFS)
+#define SH7750_TSTR_STR2 0x04 /* TCNT2 performs count operations */
+#define SH7750_TSTR_STR1 0x02 /* TCNT1 performs count operations */
+#define SH7750_TSTR_STR0 0x01 /* TCNT0 performs count operations */
+#define SH7750_TSTR_STR(n) (1 << (n))
+
+/* Timer Constant Register - TCOR0, TCOR1, TCOR2 */
+#define SH7750_TCOR_REGOFS(n) (0xD80008 + ((n)*12)) /* offset */
+#define SH7750_TCOR(n) SH7750_P4_REG32(SH7750_TCOR_REGOFS(n))
+#define SH7750_TCOR_A7(n) SH7750_A7_REG32(SH7750_TCOR_REGOFS(n))
+#define SH7750_TCOR0 SH7750_TCOR(0)
+#define SH7750_TCOR1 SH7750_TCOR(1)
+#define SH7750_TCOR2 SH7750_TCOR(2)
+#define SH7750_TCOR0_A7 SH7750_TCOR_A7(0)
+#define SH7750_TCOR1_A7 SH7750_TCOR_A7(1)
+#define SH7750_TCOR2_A7 SH7750_TCOR_A7(2)
+
+/* Timer Counter Register - TCNT0, TCNT1, TCNT2 */
+#define SH7750_TCNT_REGOFS(n) (0xD8000C + ((n)*12)) /* offset */
+#define SH7750_TCNT(n) SH7750_P4_REG32(SH7750_TCNT_REGOFS(n))
+#define SH7750_TCNT_A7(n) SH7750_A7_REG32(SH7750_TCNT_REGOFS(n))
+#define SH7750_TCNT0 SH7750_TCNT(0)
+#define SH7750_TCNT1 SH7750_TCNT(1)
+#define SH7750_TCNT2 SH7750_TCNT(2)
+#define SH7750_TCNT0_A7 SH7750_TCNT_A7(0)
+#define SH7750_TCNT1_A7 SH7750_TCNT_A7(1)
+#define SH7750_TCNT2_A7 SH7750_TCNT_A7(2)
+
+/* Timer Control Register (half) - TCR0, TCR1, TCR2 */
+#define SH7750_TCR_REGOFS(n) (0xD80010 + ((n)*12)) /* offset */
+#define SH7750_TCR(n) SH7750_P4_REG32(SH7750_TCR_REGOFS(n))
+#define SH7750_TCR_A7(n) SH7750_A7_REG32(SH7750_TCR_REGOFS(n))
+#define SH7750_TCR0 SH7750_TCR(0)
+#define SH7750_TCR1 SH7750_TCR(1)
+#define SH7750_TCR2 SH7750_TCR(2)
+#define SH7750_TCR0_A7 SH7750_TCR_A7(0)
+#define SH7750_TCR1_A7 SH7750_TCR_A7(1)
+#define SH7750_TCR2_A7 SH7750_TCR_A7(2)
+
+#define SH7750_TCR2_ICPF 0x200 /* Input Capture Interrupt Flag
+ (1 - input capture has occured) */
+#define SH7750_TCR_UNF 0x100 /* Underflow flag */
+#define SH7750_TCR2_ICPE 0x0C0 /* Input Capture Control: */
+#define SH7750_TCR2_ICPE_DIS 0x000 /* Input Capture function is not used */
+#define SH7750_TCR2_ICPE_NOINT 0x080 /* Input Capture function is used, but
+ input capture interrupt is not
+ enabled */
+#define SH7750_TCR2_ICPE_INT 0x0C0 /* Input Capture function is used,
+ input capture interrupt enabled */
+#define SH7750_TCR_UNIE 0x020 /* Underflow Interrupt Control
+ (1 - underflow interrupt enabled) */
+#define SH7750_TCR_CKEG 0x018 /* Clock Edge selection: */
+#define SH7750_TCR_CKEG_RAISE 0x000 /* Count/capture on rising edge */
+#define SH7750_TCR_CKEG_FALL 0x008 /* Count/capture on falling edge */
+#define SH7750_TCR_CKEG_BOTH 0x018 /* Count/capture on both rising and
+ falling edges */
+#define SH7750_TCR_TPSC 0x007 /* Timer prescaler */
+#define SH7750_TCR_TPSC_DIV4 0x000 /* Counts on peripheral clock/4 */
+#define SH7750_TCR_TPSC_DIV16 0x001 /* Counts on peripheral clock/16 */
+#define SH7750_TCR_TPSC_DIV64 0x002 /* Counts on peripheral clock/64 */
+#define SH7750_TCR_TPSC_DIV256 0x003 /* Counts on peripheral clock/256 */
+#define SH7750_TCR_TPSC_DIV1024 0x004 /* Counts on peripheral clock/1024 */
+#define SH7750_TCR_TPSC_RTC 0x006 /* Counts on on-chip RTC output clk */
+#define SH7750_TCR_TPSC_EXT 0x007 /* Counts on external clock */
+
+/* Input Capture Register (read-only) - TCPR2 */
+#define SH7750_TCPR2_REGOFS 0xD8002C /* offset */
+#define SH7750_TCPR2 SH7750_P4_REG32(SH7750_TCPR2_REGOFS)
+#define SH7750_TCPR2_A7 SH7750_A7_REG32(SH7750_TCPR2_REGOFS)
+
+/*
+ * Bus State Controller - BSC
+ */
+/* Bus Control Register 1 - BCR1 */
+#define SH7750_BCR1_REGOFS 0x800000 /* offset */
+#define SH7750_BCR1 SH7750_P4_REG32(SH7750_BCR1_REGOFS)
+#define SH7750_BCR1_A7 SH7750_A7_REG32(SH7750_BCR1_REGOFS)
+#define SH7750_BCR1_ENDIAN 0x80000000 /* Endianness (1 - little endian) */
+#define SH7750_BCR1_MASTER 0x40000000 /* Master/Slave mode (1-master) */
+#define SH7750_BCR1_A0MPX 0x20000000 /* Area 0 Memory Type (0-SRAM,1-MPX) */
+#define SH7750_BCR1_IPUP 0x02000000 /* Input Pin Pull-up Control:
+ 0 - pull-up resistor is on for
+ control input pins
+ 1 - pull-up resistor is off */
+#define SH7750_BCR1_OPUP 0x01000000 /* Output Pin Pull-up Control:
+ 0 - pull-up resistor is on for
+ control output pins
+ 1 - pull-up resistor is off */
+#define SH7750_BCR1_A1MBC 0x00200000 /* Area 1 SRAM Byte Control Mode:
+ 0 - Area 1 SRAM is set to
+ normal mode
+ 1 - Area 1 SRAM is set to byte
+ control mode */
+#define SH7750_BCR1_A4MBC 0x00100000 /* Area 4 SRAM Byte Control Mode:
+ 0 - Area 4 SRAM is set to
+ normal mode
+ 1 - Area 4 SRAM is set to byte
+ control mode */
+#define SH7750_BCR1_BREQEN 0x00080000 /* BREQ Enable:
+ 0 - External requests are not
+ accepted
+ 1 - External requests are
+ accepted */
+#define SH7750_BCR1_PSHR 0x00040000 /* Partial Sharing Bit:
+ 0 - Master Mode
+ 1 - Partial-sharing Mode */
+#define SH7750_BCR1_MEMMPX 0x00020000 /* Area 1 to 6 MPX Interface:
+ 0 - SRAM/burst ROM interface
+ 1 - MPX interface */
+#define SH7750_BCR1_HIZMEM 0x00008000 /* High Impendance Control. Specifies
+ the state of A[25:0], BS\, CSn\,
+ RD/WR\, CE2A\, CE2B\ in standby
+ mode and when bus is released:
+ 0 - signals go to High-Z mode
+ 1 - signals driven */
+#define SH7750_BCR1_HIZCNT 0x00004000 /* High Impendance Control. Specifies
+ the state of the RAS\, RAS2\, WEn\,
+ CASn\, DQMn, RD\, CASS\, FRAME\,
+ RD2\ signals in standby mode and
+ when bus is released:
+ 0 - signals go to High-Z mode
+ 1 - signals driven */
+#define SH7750_BCR1_A0BST 0x00003800 /* Area 0 Burst ROM Control */
+#define SH7750_BCR1_A0BST_SRAM 0x0000 /* Area 0 accessed as SRAM i/f */
+#define SH7750_BCR1_A0BST_ROM4 0x0800 /* Area 0 accessed as burst ROM
+ interface, 4 cosequtive access */
+#define SH7750_BCR1_A0BST_ROM8 0x1000 /* Area 0 accessed as burst ROM
+ interface, 8 cosequtive access */
+#define SH7750_BCR1_A0BST_ROM16 0x1800 /* Area 0 accessed as burst ROM
+ interface, 16 cosequtive access */
+#define SH7750_BCR1_A0BST_ROM32 0x2000 /* Area 0 accessed as burst ROM
+ interface, 32 cosequtive access */
+
+#define SH7750_BCR1_A5BST 0x00000700 /* Area 5 Burst ROM Control */
+#define SH7750_BCR1_A5BST_SRAM 0x0000 /* Area 5 accessed as SRAM i/f */
+#define SH7750_BCR1_A5BST_ROM4 0x0100 /* Area 5 accessed as burst ROM
+ interface, 4 cosequtive access */
+#define SH7750_BCR1_A5BST_ROM8 0x0200 /* Area 5 accessed as burst ROM
+ interface, 8 cosequtive access */
+#define SH7750_BCR1_A5BST_ROM16 0x0300 /* Area 5 accessed as burst ROM
+ interface, 16 cosequtive access */
+#define SH7750_BCR1_A5BST_ROM32 0x0400 /* Area 5 accessed as burst ROM
+ interface, 32 cosequtive access */
+
+#define SH7750_BCR1_A6BST 0x000000E0 /* Area 6 Burst ROM Control */
+#define SH7750_BCR1_A6BST_SRAM 0x0000 /* Area 6 accessed as SRAM i/f */
+#define SH7750_BCR1_A6BST_ROM4 0x0020 /* Area 6 accessed as burst ROM
+ interface, 4 cosequtive access */
+#define SH7750_BCR1_A6BST_ROM8 0x0040 /* Area 6 accessed as burst ROM
+ interface, 8 cosequtive access */
+#define SH7750_BCR1_A6BST_ROM16 0x0060 /* Area 6 accessed as burst ROM
+ interface, 16 cosequtive access */
+#define SH7750_BCR1_A6BST_ROM32 0x0080 /* Area 6 accessed as burst ROM
+ interface, 32 cosequtive access */
+
+#define SH7750_BCR1_DRAMTP 0x001C /* Area 2 and 3 Memory Type */
+#define SH7750_BCR1_DRAMTP_2SRAM_3SRAM 0x0000 /* Area 2 and 3 are SRAM or MPX
+ interface. */
+#define SH7750_BCR1_DRAMTP_2SRAM_3SDRAM 0x0008 /* Area 2 - SRAM/MPX, Area 3 -
+ synchronous DRAM */
+#define SH7750_BCR1_DRAMTP_2SDRAM_3SDRAM 0x000C /* Area 2 and 3 are synchronous
+ DRAM interface */
+#define SH7750_BCR1_DRAMTP_2SRAM_3DRAM 0x0010 /* Area 2 - SRAM/MPX, Area 3 -
+ DRAM interface */
+#define SH7750_BCR1_DRAMTP_2DRAM_3DRAM 0x0014 /* Area 2 and 3 are DRAM
+ interface */
+
+#define SH7750_BCR1_A56PCM 0x00000001 /* Area 5 and 6 Bus Type:
+ 0 - SRAM interface
+ 1 - PCMCIA interface */
+
+/* Bus Control Register 2 (half) - BCR2 */
+#define SH7750_BCR2_REGOFS 0x800004 /* offset */
+#define SH7750_BCR2 SH7750_P4_REG32(SH7750_BCR2_REGOFS)
+#define SH7750_BCR2_A7 SH7750_A7_REG32(SH7750_BCR2_REGOFS)
+
+#define SH7750_BCR2_A0SZ 0xC000 /* Area 0 Bus Width */
+#define SH7750_BCR2_A0SZ_S 14
+#define SH7750_BCR2_A6SZ 0x3000 /* Area 6 Bus Width */
+#define SH7750_BCR2_A6SZ_S 12
+#define SH7750_BCR2_A5SZ 0x0C00 /* Area 5 Bus Width */
+#define SH7750_BCR2_A5SZ_S 10
+#define SH7750_BCR2_A4SZ 0x0300 /* Area 4 Bus Width */
+#define SH7750_BCR2_A4SZ_S 8
+#define SH7750_BCR2_A3SZ 0x00C0 /* Area 3 Bus Width */
+#define SH7750_BCR2_A3SZ_S 6
+#define SH7750_BCR2_A2SZ 0x0030 /* Area 2 Bus Width */
+#define SH7750_BCR2_A2SZ_S 4
+#define SH7750_BCR2_A1SZ 0x000C /* Area 1 Bus Width */
+#define SH7750_BCR2_A1SZ_S 2
+#define SH7750_BCR2_SZ_64 0 /* 64 bits */
+#define SH7750_BCR2_SZ_8 1 /* 8 bits */
+#define SH7750_BCR2_SZ_16 2 /* 16 bits */
+#define SH7750_BCR2_SZ_32 3 /* 32 bits */
+#define SH7750_BCR2_PORTEN 0x0001 /* Port Function Enable :
+ 0 - D51-D32 are not used as a port
+ 1 - D51-D32 are used as a port */
+
+/* Wait Control Register 1 - WCR1 */
+#define SH7750_WCR1_REGOFS 0x800008 /* offset */
+#define SH7750_WCR1 SH7750_P4_REG32(SH7750_WCR1_REGOFS)
+#define SH7750_WCR1_A7 SH7750_A7_REG32(SH7750_WCR1_REGOFS)
+#define SH7750_WCR1_DMAIW 0x70000000 /* DACK Device Inter-Cycle Idle
+ specification */
+#define SH7750_WCR1_DMAIW_S 28
+#define SH7750_WCR1_A6IW 0x07000000 /* Area 6 Inter-Cycle Idle spec. */
+#define SH7750_WCR1_A6IW_S 24
+#define SH7750_WCR1_A5IW 0x00700000 /* Area 5 Inter-Cycle Idle spec. */
+#define SH7750_WCR1_A5IW_S 20
+#define SH7750_WCR1_A4IW 0x00070000 /* Area 4 Inter-Cycle Idle spec. */
+#define SH7750_WCR1_A4IW_S 16
+#define SH7750_WCR1_A3IW 0x00007000 /* Area 3 Inter-Cycle Idle spec. */
+#define SH7750_WCR1_A3IW_S 12
+#define SH7750_WCR1_A2IW 0x00000700 /* Area 2 Inter-Cycle Idle spec. */
+#define SH7750_WCR1_A2IW_S 8
+#define SH7750_WCR1_A1IW 0x00000070 /* Area 1 Inter-Cycle Idle spec. */
+#define SH7750_WCR1_A1IW_S 4
+#define SH7750_WCR1_A0IW 0x00000007 /* Area 0 Inter-Cycle Idle spec. */
+#define SH7750_WCR1_A0IW_S 0
+
+/* Wait Control Register 2 - WCR2 */
+#define SH7750_WCR2_REGOFS 0x80000C /* offset */
+#define SH7750_WCR2 SH7750_P4_REG32(SH7750_WCR2_REGOFS)
+#define SH7750_WCR2_A7 SH7750_A7_REG32(SH7750_WCR2_REGOFS)
+
+#define SH7750_WCR2_A6W 0xE0000000 /* Area 6 Wait Control */
+#define SH7750_WCR2_A6W_S 29
+#define SH7750_WCR2_A6B 0x1C000000 /* Area 6 Burst Pitch */
+#define SH7750_WCR2_A6B_S 26
+#define SH7750_WCR2_A5W 0x03800000 /* Area 5 Wait Control */
+#define SH7750_WCR2_A5W_S 23
+#define SH7750_WCR2_A5B 0x00700000 /* Area 5 Burst Pitch */
+#define SH7750_WCR2_A5B_S 20
+#define SH7750_WCR2_A4W 0x000E0000 /* Area 4 Wait Control */
+#define SH7750_WCR2_A4W_S 17
+#define SH7750_WCR2_A3W 0x0000E000 /* Area 3 Wait Control */
+#define SH7750_WCR2_A3W_S 13
+#define SH7750_WCR2_A2W 0x00000E00 /* Area 2 Wait Control */
+#define SH7750_WCR2_A2W_S 9
+#define SH7750_WCR2_A1W 0x000001C0 /* Area 1 Wait Control */
+#define SH7750_WCR2_A1W_S 6
+#define SH7750_WCR2_A0W 0x00000038 /* Area 0 Wait Control */
+#define SH7750_WCR2_A0W_S 3
+#define SH7750_WCR2_A0B 0x00000007 /* Area 0 Burst Pitch */
+#define SH7750_WCR2_A0B_S 0
+
+#define SH7750_WCR2_WS0 0 /* 0 wait states inserted */
+#define SH7750_WCR2_WS1 1 /* 1 wait states inserted */
+#define SH7750_WCR2_WS2 2 /* 2 wait states inserted */
+#define SH7750_WCR2_WS3 3 /* 3 wait states inserted */
+#define SH7750_WCR2_WS6 4 /* 6 wait states inserted */
+#define SH7750_WCR2_WS9 5 /* 9 wait states inserted */
+#define SH7750_WCR2_WS12 6 /* 12 wait states inserted */
+#define SH7750_WCR2_WS15 7 /* 15 wait states inserted */
+
+#define SH7750_WCR2_BPWS0 0 /* 0 wait states inserted from 2nd access */
+#define SH7750_WCR2_BPWS1 1 /* 1 wait states inserted from 2nd access */
+#define SH7750_WCR2_BPWS2 2 /* 2 wait states inserted from 2nd access */
+#define SH7750_WCR2_BPWS3 3 /* 3 wait states inserted from 2nd access */
+#define SH7750_WCR2_BPWS4 4 /* 4 wait states inserted from 2nd access */
+#define SH7750_WCR2_BPWS5 5 /* 5 wait states inserted from 2nd access */
+#define SH7750_WCR2_BPWS6 6 /* 6 wait states inserted from 2nd access */
+#define SH7750_WCR2_BPWS7 7 /* 7 wait states inserted from 2nd access */
+
+/* DRAM CAS\ Assertion Delay (area 3,2) */
+#define SH7750_WCR2_DRAM_CAS_ASW1 0 /* 1 cycle */
+#define SH7750_WCR2_DRAM_CAS_ASW2 1 /* 2 cycles */
+#define SH7750_WCR2_DRAM_CAS_ASW3 2 /* 3 cycles */
+#define SH7750_WCR2_DRAM_CAS_ASW4 3 /* 4 cycles */
+#define SH7750_WCR2_DRAM_CAS_ASW7 4 /* 7 cycles */
+#define SH7750_WCR2_DRAM_CAS_ASW10 5 /* 10 cycles */
+#define SH7750_WCR2_DRAM_CAS_ASW13 6 /* 13 cycles */
+#define SH7750_WCR2_DRAM_CAS_ASW16 7 /* 16 cycles */
+
+/* SDRAM CAS\ Latency Cycles */
+#define SH7750_WCR2_SDRAM_CAS_LAT1 1 /* 1 cycle */
+#define SH7750_WCR2_SDRAM_CAS_LAT2 2 /* 2 cycles */
+#define SH7750_WCR2_SDRAM_CAS_LAT3 3 /* 3 cycles */
+#define SH7750_WCR2_SDRAM_CAS_LAT4 4 /* 4 cycles */
+#define SH7750_WCR2_SDRAM_CAS_LAT5 5 /* 5 cycles */
+
+/* Wait Control Register 3 - WCR3 */
+#define SH7750_WCR3_REGOFS 0x800010 /* offset */
+#define SH7750_WCR3 SH7750_P4_REG32(SH7750_WCR3_REGOFS)
+#define SH7750_WCR3_A7 SH7750_A7_REG32(SH7750_WCR3_REGOFS)
+
+#define SH7750_WCR3_A6S 0x04000000 /* Area 6 Write Strobe Setup time */
+#define SH7750_WCR3_A6H 0x03000000 /* Area 6 Data Hold Time */
+#define SH7750_WCR3_A6H_S 24
+#define SH7750_WCR3_A5S 0x00400000 /* Area 5 Write Strobe Setup time */
+#define SH7750_WCR3_A5H 0x00300000 /* Area 5 Data Hold Time */
+#define SH7750_WCR3_A5H_S 20
+#define SH7750_WCR3_A4S 0x00040000 /* Area 4 Write Strobe Setup time */
+#define SH7750_WCR3_A4H 0x00030000 /* Area 4 Data Hold Time */
+#define SH7750_WCR3_A4H_S 16
+#define SH7750_WCR3_A3S 0x00004000 /* Area 3 Write Strobe Setup time */
+#define SH7750_WCR3_A3H 0x00003000 /* Area 3 Data Hold Time */
+#define SH7750_WCR3_A3H_S 12
+#define SH7750_WCR3_A2S 0x00000400 /* Area 2 Write Strobe Setup time */
+#define SH7750_WCR3_A2H 0x00000300 /* Area 2 Data Hold Time */
+#define SH7750_WCR3_A2H_S 8
+#define SH7750_WCR3_A1S 0x00000040 /* Area 1 Write Strobe Setup time */
+#define SH7750_WCR3_A1H 0x00000030 /* Area 1 Data Hold Time */
+#define SH7750_WCR3_A1H_S 4
+#define SH7750_WCR3_A0S 0x00000004 /* Area 0 Write Strobe Setup time */
+#define SH7750_WCR3_A0H 0x00000003 /* Area 0 Data Hold Time */
+#define SH7750_WCR3_A0H_S 0
+
+#define SH7750_WCR3_DHWS_0 0 /* 0 wait states data hold time */
+#define SH7750_WCR3_DHWS_1 1 /* 1 wait states data hold time */
+#define SH7750_WCR3_DHWS_2 2 /* 2 wait states data hold time */
+#define SH7750_WCR3_DHWS_3 3 /* 3 wait states data hold time */
+
+#define SH7750_MCR_REGOFS 0x800014 /* offset */
+#define SH7750_MCR SH7750_P4_REG32(SH7750_MCR_REGOFS)
+#define SH7750_MCR_A7 SH7750_A7_REG32(SH7750_MCR_REGOFS)
+
+#define SH7750_MCR_RASD 0x80000000 /* RAS Down mode */
+#define SH7750_MCR_MRSET 0x40000000 /* SDRAM Mode Register Set */
+#define SH7750_MCR_PALL 0x00000000 /* SDRAM Precharge All cmd. Mode */
+#define SH7750_MCR_TRC 0x38000000 /* RAS Precharge Time at End of
+ Refresh: */
+#define SH7750_MCR_TRC_0 0x00000000 /* 0 */
+#define SH7750_MCR_TRC_3 0x08000000 /* 3 */
+#define SH7750_MCR_TRC_6 0x10000000 /* 6 */
+#define SH7750_MCR_TRC_9 0x18000000 /* 9 */
+#define SH7750_MCR_TRC_12 0x20000000 /* 12 */
+#define SH7750_MCR_TRC_15 0x28000000 /* 15 */
+#define SH7750_MCR_TRC_18 0x30000000 /* 18 */
+#define SH7750_MCR_TRC_21 0x38000000 /* 21 */
+
+#define SH7750_MCR_TCAS 0x00800000 /* CAS Negation Period */
+#define SH7750_MCR_TCAS_1 0x00000000 /* 1 */
+#define SH7750_MCR_TCAS_2 0x00800000 /* 2 */
+
+#define SH7750_MCR_TPC 0x00380000 /* DRAM: RAS Precharge Period
+ SDRAM: minimum number of cycles
+ until the next bank active cmd
+ is output after precharging */
+#define SH7750_MCR_TPC_S 19
+#define SH7750_MCR_TPC_SDRAM_1 0x00000000 /* 1 cycle */
+#define SH7750_MCR_TPC_SDRAM_2 0x00080000 /* 2 cycles */
+#define SH7750_MCR_TPC_SDRAM_3 0x00100000 /* 3 cycles */
+#define SH7750_MCR_TPC_SDRAM_4 0x00180000 /* 4 cycles */
+#define SH7750_MCR_TPC_SDRAM_5 0x00200000 /* 5 cycles */
+#define SH7750_MCR_TPC_SDRAM_6 0x00280000 /* 6 cycles */
+#define SH7750_MCR_TPC_SDRAM_7 0x00300000 /* 7 cycles */
+#define SH7750_MCR_TPC_SDRAM_8 0x00380000 /* 8 cycles */
+
+#define SH7750_MCR_RCD 0x00030000 /* DRAM: RAS-CAS Assertion Delay time
+ SDRAM: bank active-read/write cmd
+ delay time */
+#define SH7750_MCR_RCD_DRAM_2 0x00000000 /* DRAM delay 2 clocks */
+#define SH7750_MCR_RCD_DRAM_3 0x00010000 /* DRAM delay 3 clocks */
+#define SH7750_MCR_RCD_DRAM_4 0x00020000 /* DRAM delay 4 clocks */
+#define SH7750_MCR_RCD_DRAM_5 0x00030000 /* DRAM delay 5 clocks */
+#define SH7750_MCR_RCD_SDRAM_2 0x00010000 /* DRAM delay 2 clocks */
+#define SH7750_MCR_RCD_SDRAM_3 0x00020000 /* DRAM delay 3 clocks */
+#define SH7750_MCR_RCD_SDRAM_4 0x00030000 /* DRAM delay 4 clocks */
+
+#define SH7750_MCR_TRWL 0x0000E000 /* SDRAM Write Precharge Delay */
+#define SH7750_MCR_TRWL_1 0x00000000 /* 1 */
+#define SH7750_MCR_TRWL_2 0x00002000 /* 2 */
+#define SH7750_MCR_TRWL_3 0x00004000 /* 3 */
+#define SH7750_MCR_TRWL_4 0x00006000 /* 4 */
+#define SH7750_MCR_TRWL_5 0x00008000 /* 5 */
+
+#define SH7750_MCR_TRAS 0x00001C00 /* DRAM: CAS-Before-RAS Refresh RAS
+ asserting period
+ SDRAM: Command interval after
+ synchronous DRAM refresh */
+#define SH7750_MCR_TRAS_DRAM_2 0x00000000 /* 2 */
+#define SH7750_MCR_TRAS_DRAM_3 0x00000400 /* 3 */
+#define SH7750_MCR_TRAS_DRAM_4 0x00000800 /* 4 */
+#define SH7750_MCR_TRAS_DRAM_5 0x00000C00 /* 5 */
+#define SH7750_MCR_TRAS_DRAM_6 0x00001000 /* 6 */
+#define SH7750_MCR_TRAS_DRAM_7 0x00001400 /* 7 */
+#define SH7750_MCR_TRAS_DRAM_8 0x00001800 /* 8 */
+#define SH7750_MCR_TRAS_DRAM_9 0x00001C00 /* 9 */
+
+#define SH7750_MCR_TRAS_SDRAM_TRC_4 0x00000000 /* 4 + TRC */
+#define SH7750_MCR_TRAS_SDRAM_TRC_5 0x00000400 /* 5 + TRC */
+#define SH7750_MCR_TRAS_SDRAM_TRC_6 0x00000800 /* 6 + TRC */
+#define SH7750_MCR_TRAS_SDRAM_TRC_7 0x00000C00 /* 7 + TRC */
+#define SH7750_MCR_TRAS_SDRAM_TRC_8 0x00001000 /* 8 + TRC */
+#define SH7750_MCR_TRAS_SDRAM_TRC_9 0x00001400 /* 9 + TRC */
+#define SH7750_MCR_TRAS_SDRAM_TRC_10 0x00001800 /* 10 + TRC */
+#define SH7750_MCR_TRAS_SDRAM_TRC_11 0x00001C00 /* 11 + TRC */
+
+#define SH7750_MCR_BE 0x00000200 /* Burst Enable */
+#define SH7750_MCR_SZ 0x00000180 /* Memory Data Size */
+#define SH7750_MCR_SZ_64 0x00000000 /* 64 bits */
+#define SH7750_MCR_SZ_16 0x00000100 /* 16 bits */
+#define SH7750_MCR_SZ_32 0x00000180 /* 32 bits */
+
+#define SH7750_MCR_AMX 0x00000078 /* Address Multiplexing */
+#define SH7750_MCR_AMX_S 3
+#define SH7750_MCR_AMX_DRAM_8BIT_COL 0x00000000 /* 8-bit column addr */
+#define SH7750_MCR_AMX_DRAM_9BIT_COL 0x00000008 /* 9-bit column addr */
+#define SH7750_MCR_AMX_DRAM_10BIT_COL 0x00000010 /* 10-bit column addr */
+#define SH7750_MCR_AMX_DRAM_11BIT_COL 0x00000018 /* 11-bit column addr */
+#define SH7750_MCR_AMX_DRAM_12BIT_COL 0x00000020 /* 12-bit column addr */
+/* See SH7750 Hardware Manual for SDRAM address multiplexor selection */
+
+#define SH7750_MCR_RFSH 0x00000004 /* Refresh Control */
+#define SH7750_MCR_RMODE 0x00000002 /* Refresh Mode: */
+#define SH7750_MCR_RMODE_NORMAL 0x00000000 /* Normal Refresh Mode */
+#define SH7750_MCR_RMODE_SELF 0x00000002 /* Self-Refresh Mode */
+#define SH7750_MCR_RMODE_EDO 0x00000001 /* EDO Mode */
+
+/* SDRAM Mode Set address */
+#define SH7750_SDRAM_MODE_A2_BASE 0xFF900000
+#define SH7750_SDRAM_MODE_A3_BASE 0xFF940000
+#define SH7750_SDRAM_MODE_A2_32BIT(x) (SH7750_SDRAM_MODE_A2_BASE + ((x) << 2))
+#define SH7750_SDRAM_MODE_A3_32BIT(x) (SH7750_SDRAM_MODE_A3_BASE + ((x) << 2))
+#define SH7750_SDRAM_MODE_A2_64BIT(x) (SH7750_SDRAM_MODE_A2_BASE + ((x) << 3))
+#define SH7750_SDRAM_MODE_A3_64BIT(x) (SH7750_SDRAM_MODE_A3_BASE + ((x) << 3))
+
+
+/* PCMCIA Control Register (half) - PCR */
+#define SH7750_PCR_REGOFS 0x800018 /* offset */
+#define SH7750_PCR SH7750_P4_REG32(SH7750_PCR_REGOFS)
+#define SH7750_PCR_A7 SH7750_A7_REG32(SH7750_PCR_REGOFS)
+
+#define SH7750_PCR_A5PCW 0xC000 /* Area 5 PCMCIA Wait - Number of wait
+ states to be added to the number of
+ waits specified by WCR2 in a low-speed
+ PCMCIA wait cycle */
+#define SH7750_PCR_A5PCW_0 0x0000 /* 0 waits inserted */
+#define SH7750_PCR_A5PCW_15 0x4000 /* 15 waits inserted */
+#define SH7750_PCR_A5PCW_30 0x8000 /* 30 waits inserted */
+#define SH7750_PCR_A5PCW_50 0xC000 /* 50 waits inserted */
+
+#define SH7750_PCR_A6PCW 0x3000 /* Area 6 PCMCIA Wait - Number of wait
+ states to be added to the number of
+ waits specified by WCR2 in a low-speed
+ PCMCIA wait cycle */
+#define SH7750_PCR_A6PCW_0 0x0000 /* 0 waits inserted */
+#define SH7750_PCR_A6PCW_15 0x1000 /* 15 waits inserted */
+#define SH7750_PCR_A6PCW_30 0x2000 /* 30 waits inserted */
+#define SH7750_PCR_A6PCW_50 0x3000 /* 50 waits inserted */
+
+#define SH7750_PCR_A5TED 0x0E00 /* Area 5 Address-OE\/WE\ Assertion Delay,
+ delay time from address output to
+ OE\/WE\ assertion on the connected
+ PCMCIA interface */
+#define SH7750_PCR_A5TED_S 9
+#define SH7750_PCR_A6TED 0x01C0 /* Area 6 Address-OE\/WE\ Assertion Delay */
+#define SH7750_PCR_A6TED_S 6
+
+#define SH7750_PCR_TED_0WS 0 /* 0 Waits inserted */
+#define SH7750_PCR_TED_1WS 1 /* 1 Waits inserted */
+#define SH7750_PCR_TED_2WS 2 /* 2 Waits inserted */
+#define SH7750_PCR_TED_3WS 3 /* 3 Waits inserted */
+#define SH7750_PCR_TED_6WS 4 /* 6 Waits inserted */
+#define SH7750_PCR_TED_9WS 5 /* 9 Waits inserted */
+#define SH7750_PCR_TED_12WS 6 /* 12 Waits inserted */
+#define SH7750_PCR_TED_15WS 7 /* 15 Waits inserted */
+
+#define SH7750_PCR_A5TEH 0x0038 /* Area 5 OE\/WE\ Negation Address delay,
+ address hold delay time from OE\/WE\
+ negation in a write on the connected
+ PCMCIA interface */
+#define SH7750_PCR_A5TEH_S 3
+
+#define SH7750_PCR_A6TEH 0x0007 /* Area 6 OE\/WE\ Negation Address delay */
+#define SH7750_PCR_A6TEH_S 0
+
+#define SH7750_PCR_TEH_0WS 0 /* 0 Waits inserted */
+#define SH7750_PCR_TEH_1WS 1 /* 1 Waits inserted */
+#define SH7750_PCR_TEH_2WS 2 /* 2 Waits inserted */
+#define SH7750_PCR_TEH_3WS 3 /* 3 Waits inserted */
+#define SH7750_PCR_TEH_6WS 4 /* 6 Waits inserted */
+#define SH7750_PCR_TEH_9WS 5 /* 9 Waits inserted */
+#define SH7750_PCR_TEH_12WS 6 /* 12 Waits inserted */
+#define SH7750_PCR_TEH_15WS 7 /* 15 Waits inserted */
+
+/* Refresh Timer Control/Status Register (half) - RTSCR */
+#define SH7750_RTCSR_REGOFS 0x80001C /* offset */
+#define SH7750_RTCSR SH7750_P4_REG32(SH7750_RTCSR_REGOFS)
+#define SH7750_RTCSR_A7 SH7750_A7_REG32(SH7750_RTCSR_REGOFS)
+
+#define SH7750_RTCSR_KEY 0xA500 /* RTCSR write key */
+#define SH7750_RTCSR_CMF 0x0080 /* Compare-Match Flag (indicates a
+ match between the refresh timer
+ counter and refresh time constant) */
+#define SH7750_RTCSR_CMIE 0x0040 /* Compare-Match Interrupt Enable */
+#define SH7750_RTCSR_CKS 0x0038 /* Refresh Counter Clock Selects */
+#define SH7750_RTCSR_CKS_DIS 0x0000 /* Clock Input Disabled */
+#define SH7750_RTCSR_CKS_CKIO_DIV4 0x0008 /* Bus Clock / 4 */
+#define SH7750_RTCSR_CKS_CKIO_DIV16 0x0010 /* Bus Clock / 16 */
+#define SH7750_RTCSR_CKS_CKIO_DIV64 0x0018 /* Bus Clock / 64 */
+#define SH7750_RTCSR_CKS_CKIO_DIV256 0x0020 /* Bus Clock / 256 */
+#define SH7750_RTCSR_CKS_CKIO_DIV1024 0x0028 /* Bus Clock / 1024 */
+#define SH7750_RTCSR_CKS_CKIO_DIV2048 0x0030 /* Bus Clock / 2048 */
+#define SH7750_RTCSR_CKS_CKIO_DIV4096 0x0038 /* Bus Clock / 4096 */
+
+#define SH7750_RTCSR_OVF 0x0004 /* Refresh Count Overflow Flag */
+#define SH7750_RTCSR_OVIE 0x0002 /* Refresh Count Overflow Interrupt
+ Enable */
+#define SH7750_RTCSR_LMTS 0x0001 /* Refresh Count Overflow Limit Select */
+#define SH7750_RTCSR_LMTS_1024 0x0000 /* Count Limit is 1024 */
+#define SH7750_RTCSR_LMTS_512 0x0001 /* Count Limit is 512 */
+
+/* Refresh Timer Counter (half) - RTCNT */
+#define SH7750_RTCNT_REGOFS 0x800020 /* offset */
+#define SH7750_RTCNT SH7750_P4_REG32(SH7750_RTCNT_REGOFS)
+#define SH7750_RTCNT_A7 SH7750_A7_REG32(SH7750_RTCNT_REGOFS)
+
+#define SH7750_RTCNT_KEY 0xA500 /* RTCNT write key */
+
+/* Refresh Time Constant Register (half) - RTCOR */
+#define SH7750_RTCOR_REGOFS 0x800024 /* offset */
+#define SH7750_RTCOR SH7750_P4_REG32(SH7750_RTCOR_REGOFS)
+#define SH7750_RTCOR_A7 SH7750_A7_REG32(SH7750_RTCOR_REGOFS)
+
+#define SH7750_RTCOR_KEY 0xA500 /* RTCOR write key */
+
+/* Refresh Count Register (half) - RFCR */
+#define SH7750_RFCR_REGOFS 0x800028 /* offset */
+#define SH7750_RFCR SH7750_P4_REG32(SH7750_RFCR_REGOFS)
+#define SH7750_RFCR_A7 SH7750_A7_REG32(SH7750_RFCR_REGOFS)
+
+#define SH7750_RFCR_KEY 0xA400 /* RFCR write key */
+
+/*
+ * Direct Memory Access Controller (DMAC)
+ */
+
+/* DMA Source Address Register - SAR0, SAR1, SAR2, SAR3 */
+#define SH7750_SAR_REGOFS(n) (0xA00000 + ((n)*16)) /* offset */
+#define SH7750_SAR(n) SH7750_P4_REG32(SH7750_SAR_REGOFS(n))
+#define SH7750_SAR_A7(n) SH7750_A7_REG32(SH7750_SAR_REGOFS(n))
+#define SH7750_SAR0 SH7750_SAR(0)
+#define SH7750_SAR1 SH7750_SAR(1)
+#define SH7750_SAR2 SH7750_SAR(2)
+#define SH7750_SAR3 SH7750_SAR(3)
+#define SH7750_SAR0_A7 SH7750_SAR_A7(0)
+#define SH7750_SAR1_A7 SH7750_SAR_A7(1)
+#define SH7750_SAR2_A7 SH7750_SAR_A7(2)
+#define SH7750_SAR3_A7 SH7750_SAR_A7(3)
+
+/* DMA Destination Address Register - DAR0, DAR1, DAR2, DAR3 */
+#define SH7750_DAR_REGOFS(n) (0xA00004 + ((n)*16)) /* offset */
+#define SH7750_DAR(n) SH7750_P4_REG32(SH7750_DAR_REGOFS(n))
+#define SH7750_DAR_A7(n) SH7750_A7_REG32(SH7750_DAR_REGOFS(n))
+#define SH7750_DAR0 SH7750_DAR(0)
+#define SH7750_DAR1 SH7750_DAR(1)
+#define SH7750_DAR2 SH7750_DAR(2)
+#define SH7750_DAR3 SH7750_DAR(3)
+#define SH7750_DAR0_A7 SH7750_DAR_A7(0)
+#define SH7750_DAR1_A7 SH7750_DAR_A7(1)
+#define SH7750_DAR2_A7 SH7750_DAR_A7(2)
+#define SH7750_DAR3_A7 SH7750_DAR_A7(3)
+
+/* DMA Transfer Count Register - DMATCR0, DMATCR1, DMATCR2, DMATCR3 */
+#define SH7750_DMATCR_REGOFS(n) (0xA00008 + ((n)*16)) /* offset */
+#define SH7750_DMATCR(n) SH7750_P4_REG32(SH7750_DMATCR_REGOFS(n))
+#define SH7750_DMATCR_A7(n) SH7750_A7_REG32(SH7750_DMATCR_REGOFS(n))
+#define SH7750_DMATCR0_P4 SH7750_DMATCR(0)
+#define SH7750_DMATCR1_P4 SH7750_DMATCR(1)
+#define SH7750_DMATCR2_P4 SH7750_DMATCR(2)
+#define SH7750_DMATCR3_P4 SH7750_DMATCR(3)
+#define SH7750_DMATCR0_A7 SH7750_DMATCR_A7(0)
+#define SH7750_DMATCR1_A7 SH7750_DMATCR_A7(1)
+#define SH7750_DMATCR2_A7 SH7750_DMATCR_A7(2)
+#define SH7750_DMATCR3_A7 SH7750_DMATCR_A7(3)
+
+/* DMA Channel Control Register - CHCR0, CHCR1, CHCR2, CHCR3 */
+#define SH7750_CHCR_REGOFS(n) (0xA0000C + ((n)*16)) /* offset */
+#define SH7750_CHCR(n) SH7750_P4_REG32(SH7750_CHCR_REGOFS(n))
+#define SH7750_CHCR_A7(n) SH7750_A7_REG32(SH7750_CHCR_REGOFS(n))
+#define SH7750_CHCR0 SH7750_CHCR(0)
+#define SH7750_CHCR1 SH7750_CHCR(1)
+#define SH7750_CHCR2 SH7750_CHCR(2)
+#define SH7750_CHCR3 SH7750_CHCR(3)
+#define SH7750_CHCR0_A7 SH7750_CHCR_A7(0)
+#define SH7750_CHCR1_A7 SH7750_CHCR_A7(1)
+#define SH7750_CHCR2_A7 SH7750_CHCR_A7(2)
+#define SH7750_CHCR3_A7 SH7750_CHCR_A7(3)
+
+#define SH7750_CHCR_SSA 0xE0000000 /* Source Address Space Attribute */
+#define SH7750_CHCR_SSA_PCMCIA 0x00000000 /* Reserved in PCMCIA access */
+#define SH7750_CHCR_SSA_DYNBSZ 0x20000000 /* Dynamic Bus Sizing I/O space */
+#define SH7750_CHCR_SSA_IO8 0x40000000 /* 8-bit I/O space */
+#define SH7750_CHCR_SSA_IO16 0x60000000 /* 16-bit I/O space */
+#define SH7750_CHCR_SSA_CMEM8 0x80000000 /* 8-bit common memory space */
+#define SH7750_CHCR_SSA_CMEM16 0xA0000000 /* 16-bit common memory space */
+#define SH7750_CHCR_SSA_AMEM8 0xC0000000 /* 8-bit attribute memory space */
+#define SH7750_CHCR_SSA_AMEM16 0xE0000000 /* 16-bit attribute memory space */
+
+#define SH7750_CHCR_STC 0x10000000 /* Source Address Wait Control Select,
+ specifies CS5 or CS6 space wait
+ control for PCMCIA access */
+
+#define SH7750_CHCR_DSA 0x0E000000 /* Source Address Space Attribute */
+#define SH7750_CHCR_DSA_PCMCIA 0x00000000 /* Reserved in PCMCIA access */
+#define SH7750_CHCR_DSA_DYNBSZ 0x02000000 /* Dynamic Bus Sizing I/O space */
+#define SH7750_CHCR_DSA_IO8 0x04000000 /* 8-bit I/O space */
+#define SH7750_CHCR_DSA_IO16 0x06000000 /* 16-bit I/O space */
+#define SH7750_CHCR_DSA_CMEM8 0x08000000 /* 8-bit common memory space */
+#define SH7750_CHCR_DSA_CMEM16 0x0A000000 /* 16-bit common memory space */
+#define SH7750_CHCR_DSA_AMEM8 0x0C000000 /* 8-bit attribute memory space */
+#define SH7750_CHCR_DSA_AMEM16 0x0E000000 /* 16-bit attribute memory space */
+
+#define SH7750_CHCR_DTC 0x01000000 /* Destination Address Wait Control
+ Select, specifies CS5 or CS6
+ space wait control for PCMCIA
+ access */
+
+#define SH7750_CHCR_DS 0x00080000 /* DREQ\ Select : */
+#define SH7750_CHCR_DS_LOWLVL 0x00000000 /* Low Level Detection */
+#define SH7750_CHCR_DS_FALL 0x00080000 /* Falling Edge Detection */
+
+#define SH7750_CHCR_RL 0x00040000 /* Request Check Level: */
+#define SH7750_CHCR_RL_ACTH 0x00000000 /* DRAK is an active high out */
+#define SH7750_CHCR_RL_ACTL 0x00040000 /* DRAK is an active low out */
+
+#define SH7750_CHCR_AM 0x00020000 /* Acknowledge Mode: */
+#define SH7750_CHCR_AM_RD 0x00000000 /* DACK is output in read cycle */
+#define SH7750_CHCR_AM_WR 0x00020000 /* DACK is output in write cycle */
+
+#define SH7750_CHCR_AL 0x00010000 /* Acknowledge Level: */
+#define SH7750_CHCR_AL_ACTH 0x00000000 /* DACK is an active high out */
+#define SH7750_CHCR_AL_ACTL 0x00010000 /* DACK is an active low out */
+
+#define SH7750_CHCR_DM 0x0000C000 /* Destination Address Mode: */
+#define SH7750_CHCR_DM_FIX 0x00000000 /* Destination Addr Fixed */
+#define SH7750_CHCR_DM_INC 0x00004000 /* Destination Addr Incremented */
+#define SH7750_CHCR_DM_DEC 0x00008000 /* Destination Addr Decremented */
+
+#define SH7750_CHCR_SM 0x00003000 /* Source Address Mode: */
+#define SH7750_CHCR_SM_FIX 0x00000000 /* Source Addr Fixed */
+#define SH7750_CHCR_SM_INC 0x00001000 /* Source Addr Incremented */
+#define SH7750_CHCR_SM_DEC 0x00002000 /* Source Addr Decremented */
+
+#define SH7750_CHCR_RS 0x00000F00 /* Request Source Select: */
+#define SH7750_CHCR_RS_ER_DA_EA_TO_EA 0x000 /* External Request, Dual Address
+ Mode (External Addr Space->
+ External Addr Space) */
+#define SH7750_CHCR_RS_ER_SA_EA_TO_ED 0x200 /* External Request, Single
+ Address Mode (External Addr
+ Space -> External Device) */
+#define SH7750_CHCR_RS_ER_SA_ED_TO_EA 0x300 /* External Request, Single
+ Address Mode, (External
+ Device -> External Addr
+ Space) */
+#define SH7750_CHCR_RS_AR_EA_TO_EA 0x400 /* Auto-Request (External Addr
+ Space -> External Addr Space) */
+
+#define SH7750_CHCR_RS_AR_EA_TO_OCP 0x500 /* Auto-Request (External Addr
+ Space -> On-chip Peripheral
+ Module) */
+#define SH7750_CHCR_RS_AR_OCP_TO_EA 0x600 /* Auto-Request (On-chip
+ Peripheral Module ->
+ External Addr Space */
+#define SH7750_CHCR_RS_SCITX_EA_TO_SC 0x800 /* SCI Transmit-Data-Empty intr
+ transfer request (external
+ address space -> SCTDR1) */
+#define SH7750_CHCR_RS_SCIRX_SC_TO_EA 0x900 /* SCI Receive-Data-Full intr
+ transfer request (SCRDR1 ->
+ External Addr Space) */
+#define SH7750_CHCR_RS_SCIFTX_EA_TO_SC 0xA00 /* SCIF Transmit-Data-Empty intr
+ transfer request (external
+ address space -> SCFTDR1) */
+#define SH7750_CHCR_RS_SCIFRX_SC_TO_EA 0xB00 /* SCIF Receive-Data-Full intr
+ transfer request (SCFRDR2 ->
+ External Addr Space) */
+#define SH7750_CHCR_RS_TMU2_EA_TO_EA 0xC00 /* TMU Channel 2 (input capture
+ interrupt), (external address
+ space -> external address
+ space) */
+#define SH7750_CHCR_RS_TMU2_EA_TO_OCP 0xD00 /* TMU Channel 2 (input capture
+ interrupt), (external address
+ space -> on-chip peripheral
+ module) */
+#define SH7750_CHCR_RS_TMU2_OCP_TO_EA 0xE00 /* TMU Channel 2 (input capture
+ interrupt), (on-chip
+ peripheral module -> external
+ address space) */
+
+#define SH7750_CHCR_TM 0x00000080 /* Transmit mode: */
+#define SH7750_CHCR_TM_CSTEAL 0x00000000 /* Cycle Steal Mode */
+#define SH7750_CHCR_TM_BURST 0x00000080 /* Burst Mode */
+
+#define SH7750_CHCR_TS 0x00000070 /* Transmit Size: */
+#define SH7750_CHCR_TS_QUAD 0x00000000 /* Quadword Size (64 bits) */
+#define SH7750_CHCR_TS_BYTE 0x00000010 /* Byte Size (8 bit) */
+#define SH7750_CHCR_TS_WORD 0x00000020 /* Word Size (16 bit) */
+#define SH7750_CHCR_TS_LONG 0x00000030 /* Longword Size (32 bit) */
+#define SH7750_CHCR_TS_BLOCK 0x00000040 /* 32-byte block transfer */
+
+#define SH7750_CHCR_IE 0x00000004 /* Interrupt Enable */
+#define SH7750_CHCR_TE 0x00000002 /* Transfer End */
+#define SH7750_CHCR_DE 0x00000001 /* DMAC Enable */
+
+/* DMA Operation Register - DMAOR */
+#define SH7750_DMAOR_REGOFS 0xA00040 /* offset */
+#define SH7750_DMAOR SH7750_P4_REG32(SH7750_DMAOR_REGOFS)
+#define SH7750_DMAOR_A7 SH7750_A7_REG32(SH7750_DMAOR_REGOFS)
+
+#define SH7750_DMAOR_DDT 0x00008000 /* On-Demand Data Transfer Mode */
+
+#define SH7750_DMAOR_PR 0x00000300 /* Priority Mode: */
+#define SH7750_DMAOR_PR_0123 0x00000000 /* CH0 > CH1 > CH2 > CH3 */
+#define SH7750_DMAOR_PR_0231 0x00000100 /* CH0 > CH2 > CH3 > CH1 */
+#define SH7750_DMAOR_PR_2013 0x00000200 /* CH2 > CH0 > CH1 > CH3 */
+#define SH7750_DMAOR_PR_RR 0x00000300 /* Round-robin mode */
+
+#define SH7750_DMAOR_COD 0x00000010 /* Check Overrun for DREQ\ */
+#define SH7750_DMAOR_AE 0x00000004 /* Address Error flag */
+#define SH7750_DMAOR_NMIF 0x00000002 /* NMI Flag */
+#define SH7750_DMAOR_DME 0x00000001 /* DMAC Master Enable */
+
+/*
+ * Serial Communication Interface - SCI
+ * Serial Communication Interface with FIFO - SCIF
+ */
+/* SCI Receive Data Register (byte, read-only) - SCRDR1, SCFRDR2 */
+#define SH7750_SCRDR_REGOFS(n) ((n) == 1 ? 0xE00014 : 0xE80014) /* offset */
+#define SH7750_SCRDR(n) SH7750_P4_REG32(SH7750_SCRDR_REGOFS(n))
+#define SH7750_SCRDR1 SH7750_SCRDR(1)
+#define SH7750_SCRDR2 SH7750_SCRDR(2)
+#define SH7750_SCRDR_A7(n) SH7750_A7_REG32(SH7750_SCRDR_REGOFS(n))
+#define SH7750_SCRDR1_A7 SH7750_SCRDR_A7(1)
+#define SH7750_SCRDR2_A7 SH7750_SCRDR_A7(2)
+
+/* SCI Transmit Data Register (byte) - SCTDR1, SCFTDR2 */
+#define SH7750_SCTDR_REGOFS(n) ((n) == 1 ? 0xE0000C : 0xE8000C) /* offset */
+#define SH7750_SCTDR(n) SH7750_P4_REG32(SH7750_SCTDR_REGOFS(n))
+#define SH7750_SCTDR1 SH7750_SCTDR(1)
+#define SH7750_SCTDR2 SH7750_SCTDR(2)
+#define SH7750_SCTDR_A7(n) SH7750_A7_REG32(SH7750_SCTDR_REGOFS(n))
+#define SH7750_SCTDR1_A7 SH7750_SCTDR_A7(1)
+#define SH7750_SCTDR2_A7 SH7750_SCTDR_A7(2)
+
+/* SCI Serial Mode Register - SCSMR1(byte), SCSMR2(half) */
+#define SH7750_SCSMR_REGOFS(n) ((n) == 1 ? 0xE00000 : 0xE80000) /* offset */
+#define SH7750_SCSMR(n) SH7750_P4_REG32(SH7750_SCSMR_REGOFS(n))
+#define SH7750_SCSMR1 SH7750_SCSMR(1)
+#define SH7750_SCSMR2 SH7750_SCSMR(2)
+#define SH7750_SCSMR_A7(n) SH7750_A7_REG32(SH7750_SCSMR_REGOFS(n))
+#define SH7750_SCSMR1_A7 SH7750_SCSMR_A7(1)
+#define SH7750_SCSMR2_A7 SH7750_SCSMR_A7(2)
+
+#define SH7750_SCSMR1_CA 0x80 /* Communication Mode (C/A\): */
+#define SH7750_SCSMR1_CA_ASYNC 0x00 /* Asynchronous Mode */
+#define SH7750_SCSMR1_CA_SYNC 0x80 /* Synchronous Mode */
+#define SH7750_SCSMR_CHR 0x40 /* Character Length: */
+#define SH7750_SCSMR_CHR_8 0x00 /* 8-bit data */
+#define SH7750_SCSMR_CHR_7 0x40 /* 7-bit data */
+#define SH7750_SCSMR_PE 0x20 /* Parity Enable */
+#define SH7750_SCSMR_PM 0x10 /* Parity Mode: */
+#define SH7750_SCSMR_PM_EVEN 0x00 /* Even Parity */
+#define SH7750_SCSMR_PM_ODD 0x10 /* Odd Parity */
+#define SH7750_SCSMR_STOP 0x08 /* Stop Bit Length: */
+#define SH7750_SCSMR_STOP_1 0x00 /* 1 stop bit */
+#define SH7750_SCSMR_STOP_2 0x08 /* 2 stop bit */
+#define SH7750_SCSMR1_MP 0x04 /* Multiprocessor Mode */
+#define SH7750_SCSMR_CKS 0x03 /* Clock Select */
+#define SH7750_SCSMR_CKS_S 0
+#define SH7750_SCSMR_CKS_DIV1 0x00 /* Periph clock */
+#define SH7750_SCSMR_CKS_DIV4 0x01 /* Periph clock / 4 */
+#define SH7750_SCSMR_CKS_DIV16 0x02 /* Periph clock / 16 */
+#define SH7750_SCSMR_CKS_DIV64 0x03 /* Periph clock / 64 */
+
+/* SCI Serial Control Register - SCSCR1(byte), SCSCR2(half) */
+#define SH7750_SCSCR_REGOFS(n) ((n) == 1 ? 0xE00008 : 0xE80008) /* offset */
+#define SH7750_SCSCR(n) SH7750_P4_REG32(SH7750_SCSCR_REGOFS(n))
+#define SH7750_SCSCR1 SH7750_SCSCR(1)
+#define SH7750_SCSCR2 SH7750_SCSCR(2)
+#define SH7750_SCSCR_A7(n) SH7750_A7_REG32(SH7750_SCSCR_REGOFS(n))
+#define SH7750_SCSCR1_A7 SH7750_SCSCR_A7(1)
+#define SH7750_SCSCR2_A7 SH7750_SCSCR_A7(2)
+
+#define SH7750_SCSCR_TIE 0x80 /* Transmit Interrupt Enable */
+#define SH7750_SCSCR_RIE 0x40 /* Receive Interrupt Enable */
+#define SH7750_SCSCR_TE 0x20 /* Transmit Enable */
+#define SH7750_SCSCR_RE 0x10 /* Receive Enable */
+#define SH7750_SCSCR1_MPIE 0x08 /* Multiprocessor Interrupt Enable */
+#define SH7750_SCSCR2_REIE 0x08 /* Receive Error Interrupt Enable */
+#define SH7750_SCSCR1_TEIE 0x04 /* Transmit End Interrupt Enable */
+#define SH7750_SCSCR1_CKE 0x03 /* Clock Enable: */
+#define SH7750_SCSCR_CKE_INTCLK 0x00 /* Use Internal Clock */
+#define SH7750_SCSCR_CKE_EXTCLK 0x02 /* Use External Clock from SCK */
+#define SH7750_SCSCR1_CKE_ASYNC_SCK_CLKOUT 0x01 /* Use SCK as a clock output
+ in asynchronous mode */
+
+/* SCI Serial Status Register - SCSSR1(byte), SCSFR2(half) */
+#define SH7750_SCSSR_REGOFS(n) ((n) == 1 ? 0xE00010 : 0xE80010) /* offset */
+#define SH7750_SCSSR(n) SH7750_P4_REG32(SH7750_SCSSR_REGOFS(n))
+#define SH7750_SCSSR1 SH7750_SCSSR(1)
+#define SH7750_SCSFR2 SH7750_SCSSR(2)
+#define SH7750_SCSSR_A7(n) SH7750_A7_REG32(SH7750_SCSSR_REGOFS(n))
+#define SH7750_SCSSR1_A7 SH7750_SCSSR_A7(1)
+#define SH7750_SCSFR2_A7 SH7750_SCSSR_A7(2)
+
+#define SH7750_SCSSR1_TDRE 0x80 /* Transmit Data Register Empty */
+#define SH7750_SCSSR1_RDRF 0x40 /* Receive Data Register Full */
+#define SH7750_SCSSR1_ORER 0x20 /* Overrun Error */
+#define SH7750_SCSSR1_FER 0x10 /* Framing Error */
+#define SH7750_SCSSR1_PER 0x08 /* Parity Error */
+#define SH7750_SCSSR1_TEND 0x04 /* Transmit End */
+#define SH7750_SCSSR1_MPB 0x02 /* Multiprocessor Bit */
+#define SH7750_SCSSR1_MPBT 0x01 /* Multiprocessor Bit Transfer */
+
+#define SH7750_SCFSR2_PERN 0xF000 /* Number of Parity Errors */
+#define SH7750_SCFSR2_PERN_S 12
+#define SH7750_SCFSR2_FERN 0x0F00 /* Number of Framing Errors */
+#define SH7750_SCFSR2_FERN_S 8
+#define SH7750_SCFSR2_ER 0x0080 /* Receive Error */
+#define SH7750_SCFSR2_TEND 0x0040 /* Transmit End */
+#define SH7750_SCFSR2_TDFE 0x0020 /* Transmit FIFO Data Empty */
+#define SH7750_SCFSR2_BRK 0x0010 /* Break Detect */
+#define SH7750_SCFSR2_FER 0x0008 /* Framing Error */
+#define SH7750_SCFSR2_PER 0x0004 /* Parity Error */
+#define SH7750_SCFSR2_RDF 0x0002 /* Receive FIFO Data Full */
+#define SH7750_SCFSR2_DR 0x0001 /* Receive Data Ready */
+
+/* SCI Serial Port Register - SCSPTR1(byte) */
+#define SH7750_SCSPTR1_REGOFS 0xE0001C /* offset */
+#define SH7750_SCSPTR1 SH7750_P4_REG32(SH7750_SCSPTR1_REGOFS)
+#define SH7750_SCSPTR1_A7 SH7750_A7_REG32(SH7750_SCSPTR1_REGOFS)
+
+#define SH7750_SCSPTR1_EIO 0x80 /* Error Interrupt Only */
+#define SH7750_SCSPTR1_SPB1IO 0x08 /* 1: Output SPB1DT bit to SCK pin */
+#define SH7750_SCSPTR1_SPB1DT 0x04 /* Serial Port Clock Port Data */
+#define SH7750_SCSPTR1_SPB0IO 0x02 /* 1: Output SPB0DT bit to TxD pin */
+#define SH7750_SCSPTR1_SPB0DT 0x01 /* Serial Port Break Data */
+
+/* SCIF Serial Port Register - SCSPTR2(half) */
+#define SH7750_SCSPTR2_REGOFS 0xE80020 /* offset */
+#define SH7750_SCSPTR2 SH7750_P4_REG32(SH7750_SCSPTR2_REGOFS)
+#define SH7750_SCSPTR2_A7 SH7750_A7_REG32(SH7750_SCSPTR2_REGOFS)
+
+#define SH7750_SCSPTR2_RTSIO 0x80 /* 1: Output RTSDT bit to RTS2\ pin */
+#define SH7750_SCSPTR2_RTSDT 0x40 /* RTS Port Data */
+#define SH7750_SCSPTR2_CTSIO 0x20 /* 1: Output CTSDT bit to CTS2\ pin */
+#define SH7750_SCSPTR2_CTSDT 0x10 /* CTS Port Data */
+#define SH7750_SCSPTR2_SPB2IO 0x02 /* 1: Output SPBDT bit to TxD2 pin */
+#define SH7750_SCSPTR2_SPB2DT 0x01 /* Serial Port Break Data */
+
+/* SCI Bit Rate Register - SCBRR1(byte), SCBRR2(byte) */
+#define SH7750_SCBRR_REGOFS(n) ((n) == 1 ? 0xE00004 : 0xE80004) /* offset */
+#define SH7750_SCBRR(n) SH7750_P4_REG32(SH7750_SCBRR_REGOFS(n))
+#define SH7750_SCBRR1 SH7750_SCBRR_P4(1)
+#define SH7750_SCBRR2 SH7750_SCBRR_P4(2)
+#define SH7750_SCBRR_A7(n) SH7750_A7_REG32(SH7750_SCBRR_REGOFS(n))
+#define SH7750_SCBRR1_A7 SH7750_SCBRR_A7(1)
+#define SH7750_SCBRR2_A7 SH7750_SCBRR_A7(2)
+
+/* SCIF FIFO Control Register - SCFCR2(half) */
+#define SH7750_SCFCR2_REGOFS 0xE80018 /* offset */
+#define SH7750_SCFCR2 SH7750_P4_REG32(SH7750_SCFCR2_REGOFS)
+#define SH7750_SCFCR2_A7 SH7750_A7_REG32(SH7750_SCFCR2_REGOFS)
+
+#define SH7750_SCFCR2_RSTRG 0x700 /* RTS2\ Output Active Trigger; RTS2\
+ signal goes to high level when the
+ number of received data stored in
+ FIFO exceeds the trigger number */
+#define SH7750_SCFCR2_RSTRG_15 0x000 /* 15 bytes */
+#define SH7750_SCFCR2_RSTRG_1 0x000 /* 1 byte */
+#define SH7750_SCFCR2_RSTRG_4 0x000 /* 4 bytes */
+#define SH7750_SCFCR2_RSTRG_6 0x000 /* 6 bytes */
+#define SH7750_SCFCR2_RSTRG_8 0x000 /* 8 bytes */
+#define SH7750_SCFCR2_RSTRG_10 0x000 /* 10 bytes */
+#define SH7750_SCFCR2_RSTRG_14 0x000 /* 14 bytes */
+
+#define SH7750_SCFCR2_RTRG 0x0C0 /* Receive FIFO Data Number Trigger,
+ Receive Data Full (RDF) Flag sets
+ when number of receive data bytes is
+ equal or greater than the trigger
+ number */
+#define SH7750_SCFCR2_RTRG_1 0x000 /* 1 byte */
+#define SH7750_SCFCR2_RTRG_4 0x040 /* 4 bytes */
+#define SH7750_SCFCR2_RTRG_8 0x080 /* 8 bytes */
+#define SH7750_SCFCR2_RTRG_14 0x0C0 /* 14 bytes */
+
+#define SH7750_SCFCR2_TTRG 0x030 /* Transmit FIFO Data Number Trigger,
+ Transmit FIFO Data Register Empty (TDFE)
+ flag sets when the number of remaining
+ transmit data bytes is equal or less
+ than the trigger number */
+#define SH7750_SCFCR2_TTRG_8 0x000 /* 8 bytes */
+#define SH7750_SCFCR2_TTRG_4 0x010 /* 4 bytes */
+#define SH7750_SCFCR2_TTRG_2 0x020 /* 2 bytes */
+#define SH7750_SCFCR2_TTRG_1 0x030 /* 1 byte */
+
+#define SH7750_SCFCR2_MCE 0x008 /* Modem Control Enable */
+#define SH7750_SCFCR2_TFRST 0x004 /* Transmit FIFO Data Register Reset,
+ invalidates the transmit data in the
+ transmit FIFO */
+#define SH7750_SCFCR2_RFRST 0x002 /* Receive FIFO Data Register Reset,
+ invalidates the receive data in the
+ receive FIFO data register and resets
+ it to the empty state */
+#define SH7750_SCFCR2_LOOP 0x001 /* Loopback Test */
+
+/* SCIF FIFO Data Count Register - SCFDR2(half, read-only) */
+#define SH7750_SCFDR2_REGOFS 0xE8001C /* offset */
+#define SH7750_SCFDR2 SH7750_P4_REG32(SH7750_SCFDR2_REGOFS)
+#define SH7750_SCFDR2_A7 SH7750_A7_REG32(SH7750_SCFDR2_REGOFS)
+
+#define SH7750_SCFDR2_T 0x1F00 /* Number of untransmitted data bytes
+ in transmit FIFO */
+#define SH7750_SCFDR2_T_S 8
+#define SH7750_SCFDR2_R 0x001F /* Number of received data bytes in
+ receive FIFO */
+#define SH7750_SCFDR2_R_S 0
+
+/* SCIF Line Status Register - SCLSR2(half, read-only) */
+#define SH7750_SCLSR2_REGOFS 0xE80024 /* offset */
+#define SH7750_SCLSR2 SH7750_P4_REG32(SH7750_SCLSR2_REGOFS)
+#define SH7750_SCLSR2_A7 SH7750_A7_REG32(SH7750_SCLSR2_REGOFS)
+
+#define SH7750_SCLSR2_ORER 0x0001 /* Overrun Error */
+
+/*
+ * SCI-based Smart Card Interface
+ */
+/* Smart Card Mode Register - SCSCMR1(byte) */
+#define SH7750_SCSCMR1_REGOFS 0xE00018 /* offset */
+#define SH7750_SCSCMR1 SH7750_P4_REG32(SH7750_SCSCMR1_REGOFS)
+#define SH7750_SCSCMR1_A7 SH7750_A7_REG32(SH7750_SCSCMR1_REGOFS)
+
+#define SH7750_SCSCMR1_SDIR 0x08 /* Smart Card Data Transfer Direction: */
+#define SH7750_SCSCMR1_SDIR_LSBF 0x00 /* LSB-first */
+#define SH7750_SCSCMR1_SDIR_MSBF 0x08 /* MSB-first */
+
+#define SH7750_SCSCMR1_SINV 0x04 /* Smart Card Data Inversion */
+#define SH7750_SCSCMR1_SMIF 0x01 /* Smart Card Interface Mode Select */
+
+/* Smart-card specific bits in other registers */
+/* SCSMR1: */
+#define SH7750_SCSMR1_GSM 0x80 /* GSM mode select */
+
+/* SCSSR1: */
+#define SH7750_SCSSR1_ERS 0x10 /* Error Signal Status */
+
+/*
+ * I/O Ports
+ */
+/* Port Control Register A - PCTRA */
+#define SH7750_PCTRA_REGOFS 0x80002C /* offset */
+#define SH7750_PCTRA SH7750_P4_REG32(SH7750_PCTRA_REGOFS)
+#define SH7750_PCTRA_A7 SH7750_A7_REG32(SH7750_PCTRA_REGOFS)
+
+#define SH7750_PCTRA_PBPUP(n) 0 /* Bit n is pulled up */
+#define SH7750_PCTRA_PBNPUP(n) (1 << ((n)*2+1)) /* Bit n is not pulled up */
+#define SH7750_PCTRA_PBINP(n) 0 /* Bit n is an input */
+#define SH7750_PCTRA_PBOUT(n) (1 << ((n)*2)) /* Bit n is an output */
+
+/* Port Data Register A - PDTRA(half) */
+#define SH7750_PDTRA_REGOFS 0x800030 /* offset */
+#define SH7750_PDTRA SH7750_P4_REG32(SH7750_PDTRA_REGOFS)
+#define SH7750_PDTRA_A7 SH7750_A7_REG32(SH7750_PDTRA_REGOFS)
+
+#define SH7750_PDTRA_BIT(n) (1 << (n))
+
+/* Port Control Register B - PCTRB */
+#define SH7750_PCTRB_REGOFS 0x800040 /* offset */
+#define SH7750_PCTRB SH7750_P4_REG32(SH7750_PCTRB_REGOFS)
+#define SH7750_PCTRB_A7 SH7750_A7_REG32(SH7750_PCTRB_REGOFS)
+
+#define SH7750_PCTRB_PBPUP(n) 0 /* Bit n is pulled up */
+#define SH7750_PCTRB_PBNPUP(n) (1 << ((n-16)*2+1)) /* Bit n is not pulled up */
+#define SH7750_PCTRB_PBINP(n) 0 /* Bit n is an input */
+#define SH7750_PCTRB_PBOUT(n) (1 << ((n-16)*2)) /* Bit n is an output */
+
+/* Port Data Register B - PDTRB(half) */
+#define SH7750_PDTRB_REGOFS 0x800044 /* offset */
+#define SH7750_PDTRB SH7750_P4_REG32(SH7750_PDTRB_REGOFS)
+#define SH7750_PDTRB_A7 SH7750_A7_REG32(SH7750_PDTRB_REGOFS)
+
+#define SH7750_PDTRB_BIT(n) (1 << ((n)-16))
+
+/* GPIO Interrupt Control Register - GPIOIC(half) */
+#define SH7750_GPIOIC_REGOFS 0x800048 /* offset */
+#define SH7750_GPIOIC SH7750_P4_REG32(SH7750_GPIOIC_REGOFS)
+#define SH7750_GPIOIC_A7 SH7750_A7_REG32(SH7750_GPIOIC_REGOFS)
+
+#define SH7750_GPIOIC_PTIREN(n) (1 << (n)) /* Port n is used as a GPIO int */
+
+/*
+ * Interrupt Controller - INTC
+ */
+/* Interrupt Control Register - ICR (half) */
+#define SH7750_ICR_REGOFS 0xD00000 /* offset */
+#define SH7750_ICR SH7750_P4_REG32(SH7750_ICR_REGOFS)
+#define SH7750_ICR_A7 SH7750_A7_REG32(SH7750_ICR_REGOFS)
+
+#define SH7750_ICR_NMIL 0x8000 /* NMI Input Level */
+#define SH7750_ICR_MAI 0x4000 /* NMI Interrupt Mask */
+
+#define SH7750_ICR_NMIB 0x0200 /* NMI Block Mode: */
+#define SH7750_ICR_NMIB_BLK 0x0000 /* NMI requests held pending while
+ SR.BL bit is set to 1 */
+#define SH7750_ICR_NMIB_NBLK 0x0200 /* NMI requests detected when SR.BL bit
+ set to 1 */
+
+#define SH7750_ICR_NMIE 0x0100 /* NMI Edge Select: */
+#define SH7750_ICR_NMIE_FALL 0x0000 /* Interrupt request detected on falling
+ edge of NMI input */
+#define SH7750_ICR_NMIE_RISE 0x0100 /* Interrupt request detected on rising
+ edge of NMI input */
+
+#define SH7750_ICR_IRLM 0x0080 /* IRL Pin Mode: */
+#define SH7750_ICR_IRLM_ENC 0x0000 /* IRL\ pins used as a level-encoded
+ interrupt requests */
+#define SH7750_ICR_IRLM_RAW 0x0080 /* IRL\ pins used as a four independent
+ interrupt requests */
+
+/* Interrupt Priority Register A - IPRA (half) */
+#define SH7750_IPRA_REGOFS 0xD00004 /* offset */
+#define SH7750_IPRA SH7750_P4_REG32(SH7750_IPRA_REGOFS)
+#define SH7750_IPRA_A7 SH7750_A7_REG32(SH7750_IPRA_REGOFS)
+
+#define SH7750_IPRA_TMU0 0xF000 /* TMU0 interrupt priority */
+#define SH7750_IPRA_TMU0_S 12
+#define SH7750_IPRA_TMU1 0x0F00 /* TMU1 interrupt priority */
+#define SH7750_IPRA_TMU1_S 8
+#define SH7750_IPRA_TMU2 0x00F0 /* TMU2 interrupt priority */
+#define SH7750_IPRA_TMU2_S 4
+#define SH7750_IPRA_RTC 0x000F /* RTC interrupt priority */
+#define SH7750_IPRA_RTC_S 0
+
+/* Interrupt Priority Register B - IPRB (half) */
+#define SH7750_IPRB_REGOFS 0xD00008 /* offset */
+#define SH7750_IPRB SH7750_P4_REG32(SH7750_IPRB_REGOFS)
+#define SH7750_IPRB_A7 SH7750_A7_REG32(SH7750_IPRB_REGOFS)
+
+#define SH7750_IPRB_WDT 0xF000 /* WDT interrupt priority */
+#define SH7750_IPRB_WDT_S 12
+#define SH7750_IPRB_REF 0x0F00 /* Memory Refresh unit interrupt
+ priority */
+#define SH7750_IPRB_REF_S 8
+#define SH7750_IPRB_SCI1 0x00F0 /* SCI1 interrupt priority */
+#define SH7750_IPRB_SCI1_S 4
+
+/* Interrupt Priority Register ó - IPRó (half) */
+#define SH7750_IPRC_REGOFS 0xD00004 /* offset */
+#define SH7750_IPRC SH7750_P4_REG32(SH7750_IPRC_REGOFS)
+#define SH7750_IPRC_A7 SH7750_A7_REG32(SH7750_IPRC_REGOFS)
+
+#define SH7750_IPRC_GPIO 0xF000 /* GPIO interrupt priority */
+#define SH7750_IPRC_GPIO_S 12
+#define SH7750_IPRC_DMAC 0x0F00 /* DMAC interrupt priority */
+#define SH7750_IPRC_DMAC_S 8
+#define SH7750_IPRC_SCIF 0x00F0 /* SCIF interrupt priority */
+#define SH7750_IPRC_SCIF_S 4
+#define SH7750_IPRC_HUDI 0x000F /* H-UDI interrupt priority */
+#define SH7750_IPRC_HUDI_S 0
+
+
+/*
+ * User Break Controller registers
+ */
+#define SH7750_BARA 0x200000 /* Break address regiser A */
+#define SH7750_BAMRA 0x200004 /* Break address mask regiser A */
+#define SH7750_BBRA 0x200008 /* Break bus cycle regiser A */
+#define SH7750_BARB 0x20000c /* Break address regiser B */
+#define SH7750_BAMRB 0x200010 /* Break address mask regiser B */
+#define SH7750_BBRB 0x200014 /* Break bus cycle regiser B */
+#define SH7750_BASRB 0x000018 /* Break ASID regiser B */
+#define SH7750_BDRB 0x200018 /* Break data regiser B */
+#define SH7750_BDMRB 0x20001c /* Break data mask regiser B */
+#define SH7750_BRCR 0x200020 /* Break control register */
+
+#define SH7750_BRCR_UDBE 0x0001 /* User break debug enable bit */
+
+/*
+ * Missing in RTEMS, added for QEMU
+ */
+#define SH7750_BCR3_A7 0x1f800050
+#define SH7750_BCR4_A7 0x1e0a00f0
+#define SH7750_PRECHARGE0_A7 0x1f900088
+#define SH7750_PRECHARGE1_A7 0x1f940088
+
+#endif
diff --git a/hw/shix.c b/hw/shix.c
new file mode 100644
index 0000000000..9577c092c2
--- /dev/null
+++ b/hw/shix.c
@@ -0,0 +1,111 @@
+/*
+ * SHIX 2.0 board description
+ *
+ * Copyright (c) 2005 Samuel Tardieu
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+/*
+ Shix 2.0 board by Alexis Polti, described at
+ http://perso.enst.fr/~polti/realisations/shix20/
+
+ More information in target-sh4/README.sh4
+*/
+#include "vl.h"
+
+#define BIOS_FILENAME "shix_bios.bin"
+#define BIOS_ADDRESS 0xA0000000
+
+void DMA_run(void)
+{
+ /* XXXXX */
+}
+
+void irq_info(void)
+{
+ /* XXXXX */
+}
+
+void pic_set_irq(int irq, int level)
+{
+ /* XXXXX */
+}
+
+void pic_info()
+{
+ /* XXXXX */
+}
+
+void vga_update_display()
+{
+ /* XXXXX */
+}
+
+void vga_invalidate_display()
+{
+ /* XXXXX */
+}
+
+void vga_screen_dump(const char *filename)
+{
+ /* XXXXX */
+}
+
+void shix_init(int ram_size, int vga_ram_size, int boot_device,
+ DisplayState * ds, const char **fd_filename, int snapshot,
+ const char *kernel_filename, const char *kernel_cmdline,
+ const char *initrd_filename)
+{
+ int ret;
+ CPUState *env;
+ struct SH7750State *s;
+
+ printf("Initializing CPU\n");
+ env = cpu_init();
+
+ /* Allocate memory space */
+ printf("Allocating ROM\n");
+ cpu_register_physical_memory(0x00000000, 0x00004000, IO_MEM_ROM);
+ printf("Allocating SDRAM 1\n");
+ cpu_register_physical_memory(0x08000000, 0x01000000, 0x00004000);
+ printf("Allocating SDRAM 2\n");
+ cpu_register_physical_memory(0x0c000000, 0x01000000, 0x01004000);
+
+ /* Load BIOS in 0 (and access it through P2, 0xA0000000) */
+ printf("%s: load BIOS '%s'\n", __func__, BIOS_FILENAME);
+ ret = load_image(BIOS_FILENAME, phys_ram_base);
+ if (ret < 0) { /* Check bios size */
+ fprintf(stderr, "ret=%d\n", ret);
+ fprintf(stderr, "qemu: could not load SHIX bios '%s'\n",
+ BIOS_FILENAME);
+ exit(1);
+ }
+
+ /* Register peripherals */
+ s = sh7750_init(env);
+ /* XXXXX Check success */
+ tc58128_init(s, "shix_linux_nand.bin", NULL);
+ fprintf(stderr, "initialization terminated\n");
+}
+
+QEMUMachine shix_machine = {
+ "shix",
+ "shix card",
+ shix_init
+};
diff --git a/hw/tc58128.c b/hw/tc58128.c
new file mode 100644
index 0000000000..a8b26f7e8c
--- /dev/null
+++ b/hw/tc58128.c
@@ -0,0 +1,181 @@
+#include <assert.h>
+#include "vl.h"
+
+#define CE1 0x0100
+#define CE2 0x0200
+#define RE 0x0400
+#define WE 0x0800
+#define ALE 0x1000
+#define CLE 0x2000
+#define RDY1 0x4000
+#define RDY2 0x8000
+#define RDY(n) ((n) == 0 ? RDY1 : RDY2)
+
+typedef enum { WAIT, READ1, READ2, READ3 } state_t;
+
+typedef struct {
+ uint8_t *flash_contents;
+ state_t state;
+ uint32_t address;
+ uint8_t address_cycle;
+} tc58128_dev;
+
+static tc58128_dev tc58128_devs[2];
+
+#define FLASH_SIZE (16*1024*1024)
+
+void init_dev(tc58128_dev * dev, char *filename)
+{
+ int ret, blocks;
+
+ dev->state = WAIT;
+ dev->flash_contents = qemu_mallocz(FLASH_SIZE);
+ memset(dev->flash_contents, 0xff, FLASH_SIZE);
+ if (!dev->flash_contents) {
+ fprintf(stderr, "could not alloc memory for flash\n");
+ exit(1);
+ }
+ if (filename) {
+ /* Load flash image skipping the first block */
+ ret = load_image(filename, dev->flash_contents + 528 * 32);
+ if (ret < 0) {
+ fprintf(stderr, "ret=%d\n", ret);
+ fprintf(stderr, "qemu: could not load flash image %s\n",
+ filename);
+ exit(1);
+ } else {
+ /* Build first block with number of blocks */
+ blocks = (ret + 528 * 32 - 1) / (528 * 32);
+ dev->flash_contents[0] = blocks & 0xff;
+ dev->flash_contents[1] = (blocks >> 8) & 0xff;
+ dev->flash_contents[2] = (blocks >> 16) & 0xff;
+ dev->flash_contents[3] = (blocks >> 24) & 0xff;
+ fprintf(stderr, "loaded %d bytes for %s into flash\n", ret,
+ filename);
+ }
+ }
+}
+
+void handle_command(tc58128_dev * dev, uint8_t command)
+{
+ switch (command) {
+ case 0xff:
+ fprintf(stderr, "reset flash device\n");
+ dev->state = WAIT;
+ break;
+ case 0x00:
+ fprintf(stderr, "read mode 1\n");
+ dev->state = READ1;
+ dev->address_cycle = 0;
+ break;
+ case 0x01:
+ fprintf(stderr, "read mode 2\n");
+ dev->state = READ2;
+ dev->address_cycle = 0;
+ break;
+ case 0x50:
+ fprintf(stderr, "read mode 3\n");
+ dev->state = READ3;
+ dev->address_cycle = 0;
+ break;
+ default:
+ fprintf(stderr, "unknown flash command 0x%02x\n", command);
+ assert(0);
+ }
+}
+
+void handle_address(tc58128_dev * dev, uint8_t data)
+{
+ switch (dev->state) {
+ case READ1:
+ case READ2:
+ case READ3:
+ switch (dev->address_cycle) {
+ case 0:
+ dev->address = data;
+ if (dev->state == READ2)
+ dev->address |= 0x100;
+ else if (dev->state == READ3)
+ dev->address |= 0x200;
+ break;
+ case 1:
+ dev->address += data * 528 * 0x100;
+ break;
+ case 2:
+ dev->address += data * 528;
+ fprintf(stderr, "address pointer in flash: 0x%08x\n",
+ dev->address);
+ break;
+ default:
+ /* Invalid data */
+ assert(0);
+ }
+ dev->address_cycle++;
+ break;
+ default:
+ assert(0);
+ }
+}
+
+uint8_t handle_read(tc58128_dev * dev)
+{
+#if 0
+ if (dev->address % 0x100000 == 0)
+ fprintf(stderr, "reading flash at address 0x%08x\n", dev->address);
+#endif
+ return dev->flash_contents[dev->address++];
+}
+
+/* We never mark the device as busy, so interrupts cannot be triggered
+ XXXXX */
+
+int tc58128_cb(uint16_t porta, uint16_t portb,
+ uint16_t * periph_pdtra, uint16_t * periph_portadir,
+ uint16_t * periph_pdtrb, uint16_t * periph_portbdir)
+{
+ int dev;
+
+ if ((porta & CE1) == 0)
+ dev = 0;
+ else if ((porta & CE2) == 0)
+ dev = 1;
+ else
+ return 0; /* No device selected */
+
+ if ((porta & RE) && (porta & WE)) {
+ /* Nothing to do, assert ready and return to input state */
+ *periph_portadir &= 0xff00;
+ *periph_portadir |= RDY(dev);
+ *periph_pdtra |= RDY(dev);
+ return 1;
+ }
+
+ if (porta & CLE) {
+ /* Command */
+ assert((porta & WE) == 0);
+ handle_command(&tc58128_devs[dev], porta & 0x00ff);
+ } else if (porta & ALE) {
+ assert((porta & WE) == 0);
+ handle_address(&tc58128_devs[dev], porta & 0x00ff);
+ } else if ((porta & RE) == 0) {
+ *periph_portadir |= 0x00ff;
+ *periph_pdtra &= 0xff00;
+ *periph_pdtra |= handle_read(&tc58128_devs[dev]);
+ } else {
+ assert(0);
+ }
+ return 1;
+}
+
+static sh7750_io_device tc58128 = {
+ RE | WE, /* Port A triggers */
+ 0, /* Port B triggers */
+ tc58128_cb /* Callback */
+};
+
+int tc58128_init(struct SH7750State *s, char *zone1, char *zone2)
+{
+ init_dev(&tc58128_devs[0], zone1);
+ init_dev(&tc58128_devs[1], zone2);
+ return sh7750_register_io_device(s, &tc58128);
+}
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-01 10:19:30 +0000