hw/usb: Add basic i.MX USB Phy support

Add basic USB PHY support as implemented in i.MX23, i.MX28, i.MX6,
and i.MX7 SoCs.

The only support really needed - at least to boot Linux - is support
for soft reset, which needs to reset various registers to their initial
value. Otherwise, just record register values.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200313014551.12554-2-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

3 files changed, 232 insertions, 0 deletions

diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig
index 5e70ed5f7b..464348ba14 100644
--- a/hw/usb/Kconfig
+++ b/hw/usb/Kconfig
@@ -91,3 +91,8 @@ config USB_STORAGE_MTP
     bool
     default y
     depends on USB
+
+config IMX_USBPHY
+    bool
+    default y
+    depends on USB
diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs
index 2b10868937..66835e5bf7 100644
--- a/hw/usb/Makefile.objs
+++ b/hw/usb/Makefile.objs
@@ -61,3 +61,5 @@ common-obj-$(CONFIG_XEN) += xen-usb.o
 xen-usb.o-cflags := $(LIBUSB_CFLAGS)
 xen-usb.o-libs := $(LIBUSB_LIBS)
 endif
+
+common-obj-$(CONFIG_IMX_USBPHY) += imx-usb-phy.o
diff --git a/hw/usb/imx-usb-phy.c b/hw/usb/imx-usb-phy.c
new file mode 100644
index 0000000000..e705a03a1f
--- /dev/null
+++ b/hw/usb/imx-usb-phy.c
@@ -0,0 +1,225 @@
+/*
+ * i.MX USB PHY
+ *
+ * Copyright (c) 2020 Guenter Roeck <linux@roeck-us.net>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ * We need to implement basic reset control in the PHY control register.
+ * For everything else, it is sufficient to set whatever is written.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/usb/imx-usb-phy.h"
+#include "migration/vmstate.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+
+static const VMStateDescription vmstate_imx_usbphy = {
+    .name = TYPE_IMX_USBPHY,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(usbphy, IMXUSBPHYState, USBPHY_MAX),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+static void imx_usbphy_softreset(IMXUSBPHYState *s)
+{
+    s->usbphy[USBPHY_PWD] = 0x001e1c00;
+    s->usbphy[USBPHY_TX] = 0x10060607;
+    s->usbphy[USBPHY_RX] = 0x00000000;
+    s->usbphy[USBPHY_CTRL] = 0xc0200000;
+}
+
+static void imx_usbphy_reset(DeviceState *dev)
+{
+    IMXUSBPHYState *s = IMX_USBPHY(dev);
+
+    s->usbphy[USBPHY_STATUS] = 0x00000000;
+    s->usbphy[USBPHY_DEBUG] = 0x7f180000;
+    s->usbphy[USBPHY_DEBUG0_STATUS] = 0x00000000;
+    s->usbphy[USBPHY_DEBUG1] = 0x00001000;
+    s->usbphy[USBPHY_VERSION] = 0x04020000;
+
+    imx_usbphy_softreset(s);
+}
+
+static uint64_t imx_usbphy_read(void *opaque, hwaddr offset, unsigned size)
+{
+    IMXUSBPHYState *s = (IMXUSBPHYState *)opaque;
+    uint32_t index = offset >> 2;
+    uint32_t value;
+
+    switch (index) {
+    case USBPHY_PWD_SET:
+    case USBPHY_TX_SET:
+    case USBPHY_RX_SET:
+    case USBPHY_CTRL_SET:
+    case USBPHY_DEBUG_SET:
+    case USBPHY_DEBUG1_SET:
+        /*
+         * All REG_NAME_SET register access are in fact targeting the
+         * REG_NAME register.
+         */
+        value = s->usbphy[index - 1];
+        break;
+    case USBPHY_PWD_CLR:
+    case USBPHY_TX_CLR:
+    case USBPHY_RX_CLR:
+    case USBPHY_CTRL_CLR:
+    case USBPHY_DEBUG_CLR:
+    case USBPHY_DEBUG1_CLR:
+        /*
+         * All REG_NAME_CLR register access are in fact targeting the
+         * REG_NAME register.
+         */
+        value = s->usbphy[index - 2];
+        break;
+    case USBPHY_PWD_TOG:
+    case USBPHY_TX_TOG:
+    case USBPHY_RX_TOG:
+    case USBPHY_CTRL_TOG:
+    case USBPHY_DEBUG_TOG:
+    case USBPHY_DEBUG1_TOG:
+        /*
+         * All REG_NAME_TOG register access are in fact targeting the
+         * REG_NAME register.
+         */
+        value = s->usbphy[index - 3];
+        break;
+    default:
+        value = s->usbphy[index];
+        break;
+    }
+    return (uint64_t)value;
+}
+
+static void imx_usbphy_write(void *opaque, hwaddr offset, uint64_t value,
+                             unsigned size)
+{
+    IMXUSBPHYState *s = (IMXUSBPHYState *)opaque;
+    uint32_t index = offset >> 2;
+
+    switch (index) {
+    case USBPHY_CTRL:
+        s->usbphy[index] = value;
+        if (value & USBPHY_CTRL_SFTRST) {
+            imx_usbphy_softreset(s);
+        }
+        break;
+    case USBPHY_PWD:
+    case USBPHY_TX:
+    case USBPHY_RX:
+    case USBPHY_STATUS:
+    case USBPHY_DEBUG:
+    case USBPHY_DEBUG1:
+        s->usbphy[index] = value;
+        break;
+    case USBPHY_CTRL_SET:
+        s->usbphy[index - 1] |= value;
+        if (value & USBPHY_CTRL_SFTRST) {
+            imx_usbphy_softreset(s);
+        }
+        break;
+    case USBPHY_PWD_SET:
+    case USBPHY_TX_SET:
+    case USBPHY_RX_SET:
+    case USBPHY_DEBUG_SET:
+    case USBPHY_DEBUG1_SET:
+        /*
+         * All REG_NAME_SET register access are in fact targeting the
+         * REG_NAME register. So we change the value of the REG_NAME
+         * register, setting bits passed in the value.
+         */
+        s->usbphy[index - 1] |= value;
+        break;
+    case USBPHY_PWD_CLR:
+    case USBPHY_TX_CLR:
+    case USBPHY_RX_CLR:
+    case USBPHY_CTRL_CLR:
+    case USBPHY_DEBUG_CLR:
+    case USBPHY_DEBUG1_CLR:
+        /*
+         * All REG_NAME_CLR register access are in fact targeting the
+         * REG_NAME register. So we change the value of the REG_NAME
+         * register, unsetting bits passed in the value.
+         */
+        s->usbphy[index - 2] &= ~value;
+        break;
+    case USBPHY_CTRL_TOG:
+        s->usbphy[index - 3] ^= value;
+        if ((value & USBPHY_CTRL_SFTRST) &&
+            (s->usbphy[index - 3] & USBPHY_CTRL_SFTRST)) {
+            imx_usbphy_softreset(s);
+        }
+        break;
+    case USBPHY_PWD_TOG:
+    case USBPHY_TX_TOG:
+    case USBPHY_RX_TOG:
+    case USBPHY_DEBUG_TOG:
+    case USBPHY_DEBUG1_TOG:
+        /*
+         * All REG_NAME_TOG register access are in fact targeting the
+         * REG_NAME register. So we change the value of the REG_NAME
+         * register, toggling bits passed in the value.
+         */
+        s->usbphy[index - 3] ^= value;
+        break;
+    default:
+        /* Other registers are read-only */
+        break;
+    }
+}
+
+static const struct MemoryRegionOps imx_usbphy_ops = {
+    .read = imx_usbphy_read,
+    .write = imx_usbphy_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .valid = {
+        /*
+         * Our device would not work correctly if the guest was doing
+         * unaligned access. This might not be a limitation on the real
+         * device but in practice there is no reason for a guest to access
+         * this device unaligned.
+         */
+        .min_access_size = 4,
+        .max_access_size = 4,
+        .unaligned = false,
+    },
+};
+
+static void imx_usbphy_realize(DeviceState *dev, Error **errp)
+{
+    IMXUSBPHYState *s = IMX_USBPHY(dev);
+
+    memory_region_init_io(&s->iomem, OBJECT(s), &imx_usbphy_ops, s,
+                          "imx-usbphy", 0x1000);
+    sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
+}
+
+static void imx_usbphy_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->reset = imx_usbphy_reset;
+    dc->vmsd = &vmstate_imx_usbphy;
+    dc->desc = "i.MX USB PHY Module";
+    dc->realize = imx_usbphy_realize;
+}
+
+static const TypeInfo imx_usbphy_info = {
+    .name          = TYPE_IMX_USBPHY,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(IMXUSBPHYState),
+    .class_init    = imx_usbphy_class_init,
+};
+
+static void imx_usbphy_register_types(void)
+{
+    type_register_static(&imx_usbphy_info);
+}
+
+type_init(imx_usbphy_register_types)