usb: the big rename

Reorganize usb source files.  Create a new hw/usb/ directory and move
all usb source code to that place.  Also make filenames a bit more
descriptive.  Host adapters are prefixed with "hch-" now, usb device
emulations are prefixed with "dev-".  Fixup paths Makefile and include
paths to make it compile.  No code changes.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

1 files changed, 0 insertions, 637 deletions

diff --git a/hw/usb-serial.c b/hw/usb-serial.c
deleted file mode 100644
index 0aae379b20..0000000000
--- a/hw/usb-serial.c
+++ /dev/null
@@ -1,637 +0,0 @@
-/*
- * FTDI FT232BM Device emulation
- *
- * Copyright (c) 2006 CodeSourcery.
- * Copyright (c) 2008 Samuel Thibault <samuel.thibault@ens-lyon.org>
- * Written by Paul Brook, reused for FTDI by Samuel Thibault
- *
- * This code is licensed under the LGPL.
- */
-
-#include "qemu-common.h"
-#include "qemu-error.h"
-#include "usb.h"
-#include "usb-desc.h"
-#include "qemu-char.h"
-
-//#define DEBUG_Serial
-
-#ifdef DEBUG_Serial
-#define DPRINTF(fmt, ...) \
-do { printf("usb-serial: " fmt , ## __VA_ARGS__); } while (0)
-#else
-#define DPRINTF(fmt, ...) do {} while(0)
-#endif
-
-#define RECV_BUF 384
-
-/* Commands */
-#define FTDI_RESET		0
-#define FTDI_SET_MDM_CTRL	1
-#define FTDI_SET_FLOW_CTRL	2
-#define FTDI_SET_BAUD		3
-#define FTDI_SET_DATA		4
-#define FTDI_GET_MDM_ST		5
-#define FTDI_SET_EVENT_CHR	6
-#define FTDI_SET_ERROR_CHR	7
-#define FTDI_SET_LATENCY	9
-#define FTDI_GET_LATENCY	10
-
-#define DeviceOutVendor	((USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_DEVICE)<<8)
-#define DeviceInVendor	((USB_DIR_IN |USB_TYPE_VENDOR|USB_RECIP_DEVICE)<<8)
-
-/* RESET */
-
-#define FTDI_RESET_SIO	0
-#define FTDI_RESET_RX	1
-#define FTDI_RESET_TX	2
-
-/* SET_MDM_CTRL */
-
-#define FTDI_DTR	1
-#define FTDI_SET_DTR	(FTDI_DTR << 8)
-#define FTDI_RTS	2
-#define FTDI_SET_RTS	(FTDI_RTS << 8)
-
-/* SET_FLOW_CTRL */
-
-#define FTDI_RTS_CTS_HS		1
-#define FTDI_DTR_DSR_HS		2
-#define FTDI_XON_XOFF_HS	4
-
-/* SET_DATA */
-
-#define FTDI_PARITY	(0x7 << 8)
-#define FTDI_ODD	(0x1 << 8)
-#define FTDI_EVEN	(0x2 << 8)
-#define FTDI_MARK	(0x3 << 8)
-#define FTDI_SPACE	(0x4 << 8)
-
-#define FTDI_STOP	(0x3 << 11)
-#define FTDI_STOP1	(0x0 << 11)
-#define FTDI_STOP15	(0x1 << 11)
-#define FTDI_STOP2	(0x2 << 11)
-
-/* GET_MDM_ST */
-/* TODO: should be sent every 40ms */
-#define FTDI_CTS  (1<<4)        // CTS line status
-#define FTDI_DSR  (1<<5)        // DSR line status
-#define FTDI_RI   (1<<6)        // RI line status
-#define FTDI_RLSD (1<<7)        // Receive Line Signal Detect
-
-/* Status */
-
-#define FTDI_DR   (1<<0)        // Data Ready
-#define FTDI_OE   (1<<1)        // Overrun Err
-#define FTDI_PE   (1<<2)        // Parity Err
-#define FTDI_FE   (1<<3)        // Framing Err
-#define FTDI_BI   (1<<4)        // Break Interrupt
-#define FTDI_THRE (1<<5)        // Transmitter Holding Register
-#define FTDI_TEMT (1<<6)        // Transmitter Empty
-#define FTDI_FIFO (1<<7)        // Error in FIFO
-
-typedef struct {
-    USBDevice dev;
-    uint8_t recv_buf[RECV_BUF];
-    uint16_t recv_ptr;
-    uint16_t recv_used;
-    uint8_t event_chr;
-    uint8_t error_chr;
-    uint8_t event_trigger;
-    QEMUSerialSetParams params;
-    int latency;        /* ms */
-    CharDriverState *cs;
-} USBSerialState;
-
-enum {
-    STR_MANUFACTURER = 1,
-    STR_PRODUCT_SERIAL,
-    STR_PRODUCT_BRAILLE,
-    STR_SERIALNUMBER,
-};
-
-static const USBDescStrings desc_strings = {
-    [STR_MANUFACTURER]    = "QEMU " QEMU_VERSION,
-    [STR_PRODUCT_SERIAL]  = "QEMU USB SERIAL",
-    [STR_PRODUCT_BRAILLE] = "QEMU USB BRAILLE",
-    [STR_SERIALNUMBER]    = "1",
-};
-
-static const USBDescIface desc_iface0 = {
-    .bInterfaceNumber              = 0,
-    .bNumEndpoints                 = 2,
-    .bInterfaceClass               = 0xff,
-    .bInterfaceSubClass            = 0xff,
-    .bInterfaceProtocol            = 0xff,
-    .eps = (USBDescEndpoint[]) {
-        {
-            .bEndpointAddress      = USB_DIR_IN | 0x01,
-            .bmAttributes          = USB_ENDPOINT_XFER_BULK,
-            .wMaxPacketSize        = 64,
-        },{
-            .bEndpointAddress      = USB_DIR_OUT | 0x02,
-            .bmAttributes          = USB_ENDPOINT_XFER_BULK,
-            .wMaxPacketSize        = 64,
-        },
-    }
-};
-
-static const USBDescDevice desc_device = {
-    .bcdUSB                        = 0x0200,
-    .bMaxPacketSize0               = 8,
-    .bNumConfigurations            = 1,
-    .confs = (USBDescConfig[]) {
-        {
-            .bNumInterfaces        = 1,
-            .bConfigurationValue   = 1,
-            .bmAttributes          = 0x80,
-            .bMaxPower             = 50,
-            .nif = 1,
-            .ifs = &desc_iface0,
-        },
-    },
-};
-
-static const USBDesc desc_serial = {
-    .id = {
-        .idVendor          = 0x0403,
-        .idProduct         = 0x6001,
-        .bcdDevice         = 0x0400,
-        .iManufacturer     = STR_MANUFACTURER,
-        .iProduct          = STR_PRODUCT_SERIAL,
-        .iSerialNumber     = STR_SERIALNUMBER,
-    },
-    .full = &desc_device,
-    .str  = desc_strings,
-};
-
-static const USBDesc desc_braille = {
-    .id = {
-        .idVendor          = 0x0403,
-        .idProduct         = 0xfe72,
-        .bcdDevice         = 0x0400,
-        .iManufacturer     = STR_MANUFACTURER,
-        .iProduct          = STR_PRODUCT_BRAILLE,
-        .iSerialNumber     = STR_SERIALNUMBER,
-    },
-    .full = &desc_device,
-    .str  = desc_strings,
-};
-
-static void usb_serial_reset(USBSerialState *s)
-{
-    /* TODO: Set flow control to none */
-    s->event_chr = 0x0d;
-    s->event_trigger = 0;
-    s->recv_ptr = 0;
-    s->recv_used = 0;
-    /* TODO: purge in char driver */
-}
-
-static void usb_serial_handle_reset(USBDevice *dev)
-{
-    USBSerialState *s = (USBSerialState *)dev;
-
-    DPRINTF("Reset\n");
-
-    usb_serial_reset(s);
-    /* TODO: Reset char device, send BREAK? */
-}
-
-static uint8_t usb_get_modem_lines(USBSerialState *s)
-{
-    int flags;
-    uint8_t ret;
-
-    if (qemu_chr_fe_ioctl(s->cs, CHR_IOCTL_SERIAL_GET_TIOCM, &flags) == -ENOTSUP)
-        return FTDI_CTS|FTDI_DSR|FTDI_RLSD;
-
-    ret = 0;
-    if (flags & CHR_TIOCM_CTS)
-        ret |= FTDI_CTS;
-    if (flags & CHR_TIOCM_DSR)
-        ret |= FTDI_DSR;
-    if (flags & CHR_TIOCM_RI)
-        ret |= FTDI_RI;
-    if (flags & CHR_TIOCM_CAR)
-        ret |= FTDI_RLSD;
-
-    return ret;
-}
-
-static int usb_serial_handle_control(USBDevice *dev, USBPacket *p,
-               int request, int value, int index, int length, uint8_t *data)
-{
-    USBSerialState *s = (USBSerialState *)dev;
-    int ret;
-
-    DPRINTF("got control %x, value %x\n",request, value);
-    ret = usb_desc_handle_control(dev, p, request, value, index, length, data);
-    if (ret >= 0) {
-        return ret;
-    }
-
-    ret = 0;
-    switch (request) {
-    case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
-        ret = 0;
-        break;
-
-        /* Class specific requests.  */
-    case DeviceOutVendor | FTDI_RESET:
-        switch (value) {
-        case FTDI_RESET_SIO:
-            usb_serial_reset(s);
-            break;
-        case FTDI_RESET_RX:
-            s->recv_ptr = 0;
-            s->recv_used = 0;
-            /* TODO: purge from char device */
-            break;
-        case FTDI_RESET_TX:
-            /* TODO: purge from char device */
-            break;
-        }
-        break;
-    case DeviceOutVendor | FTDI_SET_MDM_CTRL:
-    {
-        static int flags;
-        qemu_chr_fe_ioctl(s->cs,CHR_IOCTL_SERIAL_GET_TIOCM, &flags);
-        if (value & FTDI_SET_RTS) {
-            if (value & FTDI_RTS)
-                flags |= CHR_TIOCM_RTS;
-            else
-                flags &= ~CHR_TIOCM_RTS;
-        }
-        if (value & FTDI_SET_DTR) {
-            if (value & FTDI_DTR)
-                flags |= CHR_TIOCM_DTR;
-            else
-                flags &= ~CHR_TIOCM_DTR;
-        }
-        qemu_chr_fe_ioctl(s->cs,CHR_IOCTL_SERIAL_SET_TIOCM, &flags);
-        break;
-    }
-    case DeviceOutVendor | FTDI_SET_FLOW_CTRL:
-        /* TODO: ioctl */
-        break;
-    case DeviceOutVendor | FTDI_SET_BAUD: {
-        static const int subdivisors8[8] = { 0, 4, 2, 1, 3, 5, 6, 7 };
-        int subdivisor8 = subdivisors8[((value & 0xc000) >> 14)
-                                     | ((index & 1) << 2)];
-        int divisor = value & 0x3fff;
-
-        /* chip special cases */
-        if (divisor == 1 && subdivisor8 == 0)
-            subdivisor8 = 4;
-        if (divisor == 0 && subdivisor8 == 0)
-            divisor = 1;
-
-        s->params.speed = (48000000 / 2) / (8 * divisor + subdivisor8);
-        qemu_chr_fe_ioctl(s->cs, CHR_IOCTL_SERIAL_SET_PARAMS, &s->params);
-        break;
-    }
-    case DeviceOutVendor | FTDI_SET_DATA:
-        switch (value & FTDI_PARITY) {
-            case 0:
-                s->params.parity = 'N';
-                break;
-            case FTDI_ODD:
-                s->params.parity = 'O';
-                break;
-            case FTDI_EVEN:
-                s->params.parity = 'E';
-                break;
-            default:
-                DPRINTF("unsupported parity %d\n", value & FTDI_PARITY);
-                goto fail;
-        }
-        switch (value & FTDI_STOP) {
-            case FTDI_STOP1:
-                s->params.stop_bits = 1;
-                break;
-            case FTDI_STOP2:
-                s->params.stop_bits = 2;
-                break;
-            default:
-                DPRINTF("unsupported stop bits %d\n", value & FTDI_STOP);
-                goto fail;
-        }
-        qemu_chr_fe_ioctl(s->cs, CHR_IOCTL_SERIAL_SET_PARAMS, &s->params);
-        /* TODO: TX ON/OFF */
-        break;
-    case DeviceInVendor | FTDI_GET_MDM_ST:
-        data[0] = usb_get_modem_lines(s) | 1;
-        data[1] = 0;
-        ret = 2;
-        break;
-    case DeviceOutVendor | FTDI_SET_EVENT_CHR:
-        /* TODO: handle it */
-        s->event_chr = value;
-        break;
-    case DeviceOutVendor | FTDI_SET_ERROR_CHR:
-        /* TODO: handle it */
-        s->error_chr = value;
-        break;
-    case DeviceOutVendor | FTDI_SET_LATENCY:
-        s->latency = value;
-        break;
-    case DeviceInVendor | FTDI_GET_LATENCY:
-        data[0] = s->latency;
-        ret = 1;
-        break;
-    default:
-    fail:
-        DPRINTF("got unsupported/bogus control %x, value %x\n", request, value);
-        ret = USB_RET_STALL;
-        break;
-    }
-    return ret;
-}
-
-static int usb_serial_handle_data(USBDevice *dev, USBPacket *p)
-{
-    USBSerialState *s = (USBSerialState *)dev;
-    int i, ret = 0;
-    uint8_t devep = p->ep->nr;
-    struct iovec *iov;
-    uint8_t header[2];
-    int first_len, len;
-
-    switch (p->pid) {
-    case USB_TOKEN_OUT:
-        if (devep != 2)
-            goto fail;
-        for (i = 0; i < p->iov.niov; i++) {
-            iov = p->iov.iov + i;
-            qemu_chr_fe_write(s->cs, iov->iov_base, iov->iov_len);
-        }
-        break;
-
-    case USB_TOKEN_IN:
-        if (devep != 1)
-            goto fail;
-        first_len = RECV_BUF - s->recv_ptr;
-        len = p->iov.size;
-        if (len <= 2) {
-            ret = USB_RET_NAK;
-            break;
-        }
-        header[0] = usb_get_modem_lines(s) | 1;
-        /* We do not have the uart details */
-        /* handle serial break */
-        if (s->event_trigger && s->event_trigger & FTDI_BI) {
-            s->event_trigger &= ~FTDI_BI;
-            header[1] = FTDI_BI;
-            usb_packet_copy(p, header, 2);
-            ret = 2;
-            break;
-        } else {
-            header[1] = 0;
-        }
-        len -= 2;
-        if (len > s->recv_used)
-            len = s->recv_used;
-        if (!len) {
-            ret = USB_RET_NAK;
-            break;
-        }
-        if (first_len > len)
-            first_len = len;
-        usb_packet_copy(p, header, 2);
-        usb_packet_copy(p, s->recv_buf + s->recv_ptr, first_len);
-        if (len > first_len)
-            usb_packet_copy(p, s->recv_buf, len - first_len);
-        s->recv_used -= len;
-        s->recv_ptr = (s->recv_ptr + len) % RECV_BUF;
-        ret = len + 2;
-        break;
-
-    default:
-        DPRINTF("Bad token\n");
-    fail:
-        ret = USB_RET_STALL;
-        break;
-    }
-
-    return ret;
-}
-
-static void usb_serial_handle_destroy(USBDevice *dev)
-{
-    USBSerialState *s = (USBSerialState *)dev;
-
-    qemu_chr_delete(s->cs);
-}
-
-static int usb_serial_can_read(void *opaque)
-{
-    USBSerialState *s = opaque;
-    return RECV_BUF - s->recv_used;
-}
-
-static void usb_serial_read(void *opaque, const uint8_t *buf, int size)
-{
-    USBSerialState *s = opaque;
-    int first_size, start;
-
-    /* room in the buffer? */
-    if (size > (RECV_BUF - s->recv_used))
-        size = RECV_BUF - s->recv_used;
-
-    start = s->recv_ptr + s->recv_used;
-    if (start < RECV_BUF) {
-        /* copy data to end of buffer */
-        first_size = RECV_BUF - start;
-        if (first_size > size)
-            first_size = size;
-
-        memcpy(s->recv_buf + start, buf, first_size);
-
-        /* wrap around to front if needed */
-        if (size > first_size)
-            memcpy(s->recv_buf, buf + first_size, size - first_size);
-    } else {
-        start -= RECV_BUF;
-        memcpy(s->recv_buf + start, buf, size);
-    }
-    s->recv_used += size;
-}
-
-static void usb_serial_event(void *opaque, int event)
-{
-    USBSerialState *s = opaque;
-
-    switch (event) {
-        case CHR_EVENT_BREAK:
-            s->event_trigger |= FTDI_BI;
-            break;
-        case CHR_EVENT_FOCUS:
-            break;
-        case CHR_EVENT_OPENED:
-            usb_serial_reset(s);
-            /* TODO: Reset USB port */
-            break;
-    }
-}
-
-static int usb_serial_initfn(USBDevice *dev)
-{
-    USBSerialState *s = DO_UPCAST(USBSerialState, dev, dev);
-
-    usb_desc_init(dev);
-
-    if (!s->cs) {
-        error_report("Property chardev is required");
-        return -1;
-    }
-
-    qemu_chr_add_handlers(s->cs, usb_serial_can_read, usb_serial_read,
-                          usb_serial_event, s);
-    usb_serial_handle_reset(dev);
-    return 0;
-}
-
-static USBDevice *usb_serial_init(USBBus *bus, const char *filename)
-{
-    USBDevice *dev;
-    CharDriverState *cdrv;
-    uint32_t vendorid = 0, productid = 0;
-    char label[32];
-    static int index;
-
-    while (*filename && *filename != ':') {
-        const char *p;
-        char *e;
-        if (strstart(filename, "vendorid=", &p)) {
-            vendorid = strtol(p, &e, 16);
-            if (e == p || (*e && *e != ',' && *e != ':')) {
-                error_report("bogus vendor ID %s", p);
-                return NULL;
-            }
-            filename = e;
-        } else if (strstart(filename, "productid=", &p)) {
-            productid = strtol(p, &e, 16);
-            if (e == p || (*e && *e != ',' && *e != ':')) {
-                error_report("bogus product ID %s", p);
-                return NULL;
-            }
-            filename = e;
-        } else {
-            error_report("unrecognized serial USB option %s", filename);
-            return NULL;
-        }
-        while(*filename == ',')
-            filename++;
-    }
-    if (!*filename) {
-        error_report("character device specification needed");
-        return NULL;
-    }
-    filename++;
-
-    snprintf(label, sizeof(label), "usbserial%d", index++);
-    cdrv = qemu_chr_new(label, filename, NULL);
-    if (!cdrv)
-        return NULL;
-
-    dev = usb_create(bus, "usb-serial");
-    if (!dev) {
-        return NULL;
-    }
-    qdev_prop_set_chr(&dev->qdev, "chardev", cdrv);
-    if (vendorid)
-        qdev_prop_set_uint16(&dev->qdev, "vendorid", vendorid);
-    if (productid)
-        qdev_prop_set_uint16(&dev->qdev, "productid", productid);
-    qdev_init_nofail(&dev->qdev);
-
-    return dev;
-}
-
-static USBDevice *usb_braille_init(USBBus *bus, const char *unused)
-{
-    USBDevice *dev;
-    CharDriverState *cdrv;
-
-    cdrv = qemu_chr_new("braille", "braille", NULL);
-    if (!cdrv)
-        return NULL;
-
-    dev = usb_create(bus, "usb-braille");
-    qdev_prop_set_chr(&dev->qdev, "chardev", cdrv);
-    qdev_init_nofail(&dev->qdev);
-
-    return dev;
-}
-
-static const VMStateDescription vmstate_usb_serial = {
-    .name = "usb-serial",
-    .unmigratable = 1,
-};
-
-static Property serial_properties[] = {
-    DEFINE_PROP_CHR("chardev", USBSerialState, cs),
-    DEFINE_PROP_END_OF_LIST(),
-};
-
-static void usb_serial_class_initfn(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-    USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
-
-    uc->init = usb_serial_initfn;
-    uc->product_desc   = "QEMU USB Serial";
-    uc->usb_desc       = &desc_serial;
-    uc->handle_reset   = usb_serial_handle_reset;
-    uc->handle_control = usb_serial_handle_control;
-    uc->handle_data    = usb_serial_handle_data;
-    uc->handle_destroy = usb_serial_handle_destroy;
-    dc->vmsd = &vmstate_usb_serial;
-    dc->props = serial_properties;
-}
-
-static TypeInfo serial_info = {
-    .name          = "usb-serial",
-    .parent        = TYPE_USB_DEVICE,
-    .instance_size = sizeof(USBSerialState),
-    .class_init    = usb_serial_class_initfn,
-};
-
-static Property braille_properties[] = {
-    DEFINE_PROP_CHR("chardev", USBSerialState, cs),
-    DEFINE_PROP_END_OF_LIST(),
-};
-
-static void usb_braille_class_initfn(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-    USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
-
-    uc->init           = usb_serial_initfn;
-    uc->product_desc   = "QEMU USB Braille";
-    uc->usb_desc       = &desc_braille;
-    uc->handle_reset   = usb_serial_handle_reset;
-    uc->handle_control = usb_serial_handle_control;
-    uc->handle_data    = usb_serial_handle_data;
-    uc->handle_destroy = usb_serial_handle_destroy;
-    dc->vmsd = &vmstate_usb_serial;
-    dc->props = braille_properties;
-}
-
-static TypeInfo braille_info = {
-    .name          = "usb-braille",
-    .parent        = TYPE_USB_DEVICE,
-    .instance_size = sizeof(USBSerialState),
-    .class_init    = usb_braille_class_initfn,
-};
-
-static void usb_serial_register_types(void)
-{
-    type_register_static(&serial_info);
-    usb_legacy_register("usb-serial", "serial", usb_serial_init);
-    type_register_static(&braille_info);
-    usb_legacy_register("usb-braille", "braille", usb_braille_init);
-}
-
-type_init(usb_serial_register_types)