hw: move display devices to hw/display/, configure via default-configs/

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 1450 deletions

diff --git a/hw/sm501.c b/hw/sm501.c
deleted file mode 100644
index d9fcead719..0000000000
--- a/hw/sm501.c
+++ /dev/null
@@ -1,1450 +0,0 @@
-/*
- * QEMU SM501 Device
- *
- * Copyright (c) 2008 Shin-ichiro KAWASAKI
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include <stdio.h>
-#include "hw/hw.h"
-#include "hw/char/serial.h"
-#include "ui/console.h"
-#include "hw/arm/devices.h"
-#include "hw/sysbus.h"
-#include "hw/qdev-addr.h"
-#include "qemu/range.h"
-#include "ui/pixel_ops.h"
-
-/*
- * Status: 2010/05/07
- *   - Minimum implementation for Linux console : mmio regs and CRT layer.
- *   - 2D grapihcs acceleration partially supported : only fill rectangle.
- *
- * TODO:
- *   - Panel support
- *   - Touch panel support
- *   - USB support
- *   - UART support
- *   - More 2D graphics engine support
- *   - Performance tuning
- */
-
-//#define DEBUG_SM501
-//#define DEBUG_BITBLT
-
-#ifdef DEBUG_SM501
-#define SM501_DPRINTF(fmt, ...) printf(fmt, ## __VA_ARGS__)
-#else
-#define SM501_DPRINTF(fmt, ...) do {} while(0)
-#endif
-
-
-#define MMIO_BASE_OFFSET 0x3e00000
-
-/* SM501 register definitions taken from "linux/include/linux/sm501-regs.h" */
-
-/* System Configuration area */
-/* System config base */
-#define SM501_SYS_CONFIG		(0x000000)
-
-/* config 1 */
-#define SM501_SYSTEM_CONTROL 		(0x000000)
-
-#define SM501_SYSCTRL_PANEL_TRISTATE	(1<<0)
-#define SM501_SYSCTRL_MEM_TRISTATE	(1<<1)
-#define SM501_SYSCTRL_CRT_TRISTATE	(1<<2)
-
-#define SM501_SYSCTRL_PCI_SLAVE_BURST_MASK (3<<4)
-#define SM501_SYSCTRL_PCI_SLAVE_BURST_1	(0<<4)
-#define SM501_SYSCTRL_PCI_SLAVE_BURST_2	(1<<4)
-#define SM501_SYSCTRL_PCI_SLAVE_BURST_4	(2<<4)
-#define SM501_SYSCTRL_PCI_SLAVE_BURST_8	(3<<4)
-
-#define SM501_SYSCTRL_PCI_CLOCK_RUN_EN	(1<<6)
-#define SM501_SYSCTRL_PCI_RETRY_DISABLE	(1<<7)
-#define SM501_SYSCTRL_PCI_SUBSYS_LOCK	(1<<11)
-#define SM501_SYSCTRL_PCI_BURST_READ_EN	(1<<15)
-
-/* miscellaneous control */
-
-#define SM501_MISC_CONTROL		(0x000004)
-
-#define SM501_MISC_BUS_SH		(0x0)
-#define SM501_MISC_BUS_PCI		(0x1)
-#define SM501_MISC_BUS_XSCALE		(0x2)
-#define SM501_MISC_BUS_NEC		(0x6)
-#define SM501_MISC_BUS_MASK		(0x7)
-
-#define SM501_MISC_VR_62MB		(1<<3)
-#define SM501_MISC_CDR_RESET		(1<<7)
-#define SM501_MISC_USB_LB		(1<<8)
-#define SM501_MISC_USB_SLAVE		(1<<9)
-#define SM501_MISC_BL_1			(1<<10)
-#define SM501_MISC_MC			(1<<11)
-#define SM501_MISC_DAC_POWER		(1<<12)
-#define SM501_MISC_IRQ_INVERT		(1<<16)
-#define SM501_MISC_SH			(1<<17)
-
-#define SM501_MISC_HOLD_EMPTY		(0<<18)
-#define SM501_MISC_HOLD_8		(1<<18)
-#define SM501_MISC_HOLD_16		(2<<18)
-#define SM501_MISC_HOLD_24		(3<<18)
-#define SM501_MISC_HOLD_32		(4<<18)
-#define SM501_MISC_HOLD_MASK		(7<<18)
-
-#define SM501_MISC_FREQ_12		(1<<24)
-#define SM501_MISC_PNL_24BIT		(1<<25)
-#define SM501_MISC_8051_LE		(1<<26)
-
-
-
-#define SM501_GPIO31_0_CONTROL		(0x000008)
-#define SM501_GPIO63_32_CONTROL		(0x00000C)
-#define SM501_DRAM_CONTROL		(0x000010)
-
-/* command list */
-#define SM501_ARBTRTN_CONTROL		(0x000014)
-
-/* command list */
-#define SM501_COMMAND_LIST_STATUS	(0x000024)
-
-/* interrupt debug */
-#define SM501_RAW_IRQ_STATUS		(0x000028)
-#define SM501_RAW_IRQ_CLEAR		(0x000028)
-#define SM501_IRQ_STATUS		(0x00002C)
-#define SM501_IRQ_MASK			(0x000030)
-#define SM501_DEBUG_CONTROL		(0x000034)
-
-/* power management */
-#define SM501_POWERMODE_P2X_SRC		(1<<29)
-#define SM501_POWERMODE_V2X_SRC		(1<<20)
-#define SM501_POWERMODE_M_SRC		(1<<12)
-#define SM501_POWERMODE_M1_SRC		(1<<4)
-
-#define SM501_CURRENT_GATE		(0x000038)
-#define SM501_CURRENT_CLOCK		(0x00003C)
-#define SM501_POWER_MODE_0_GATE		(0x000040)
-#define SM501_POWER_MODE_0_CLOCK	(0x000044)
-#define SM501_POWER_MODE_1_GATE		(0x000048)
-#define SM501_POWER_MODE_1_CLOCK	(0x00004C)
-#define SM501_SLEEP_MODE_GATE		(0x000050)
-#define SM501_POWER_MODE_CONTROL	(0x000054)
-
-/* power gates for units within the 501 */
-#define SM501_GATE_HOST			(0)
-#define SM501_GATE_MEMORY		(1)
-#define SM501_GATE_DISPLAY		(2)
-#define SM501_GATE_2D_ENGINE		(3)
-#define SM501_GATE_CSC			(4)
-#define SM501_GATE_ZVPORT		(5)
-#define SM501_GATE_GPIO			(6)
-#define SM501_GATE_UART0		(7)
-#define SM501_GATE_UART1		(8)
-#define SM501_GATE_SSP			(10)
-#define SM501_GATE_USB_HOST		(11)
-#define SM501_GATE_USB_GADGET		(12)
-#define SM501_GATE_UCONTROLLER		(17)
-#define SM501_GATE_AC97			(18)
-
-/* panel clock */
-#define SM501_CLOCK_P2XCLK		(24)
-/* crt clock */
-#define SM501_CLOCK_V2XCLK		(16)
-/* main clock */
-#define SM501_CLOCK_MCLK		(8)
-/* SDRAM controller clock */
-#define SM501_CLOCK_M1XCLK		(0)
-
-/* config 2 */
-#define SM501_PCI_MASTER_BASE		(0x000058)
-#define SM501_ENDIAN_CONTROL		(0x00005C)
-#define SM501_DEVICEID			(0x000060)
-/* 0x050100A0 */
-
-#define SM501_DEVICEID_SM501		(0x05010000)
-#define SM501_DEVICEID_IDMASK		(0xffff0000)
-#define SM501_DEVICEID_REVMASK		(0x000000ff)
-
-#define SM501_PLLCLOCK_COUNT		(0x000064)
-#define SM501_MISC_TIMING		(0x000068)
-#define SM501_CURRENT_SDRAM_CLOCK	(0x00006C)
-
-#define SM501_PROGRAMMABLE_PLL_CONTROL	(0x000074)
-
-/* GPIO base */
-#define SM501_GPIO			(0x010000)
-#define SM501_GPIO_DATA_LOW		(0x00)
-#define SM501_GPIO_DATA_HIGH		(0x04)
-#define SM501_GPIO_DDR_LOW		(0x08)
-#define SM501_GPIO_DDR_HIGH		(0x0C)
-#define SM501_GPIO_IRQ_SETUP		(0x10)
-#define SM501_GPIO_IRQ_STATUS		(0x14)
-#define SM501_GPIO_IRQ_RESET		(0x14)
-
-/* I2C controller base */
-#define SM501_I2C			(0x010040)
-#define SM501_I2C_BYTE_COUNT		(0x00)
-#define SM501_I2C_CONTROL		(0x01)
-#define SM501_I2C_STATUS		(0x02)
-#define SM501_I2C_RESET			(0x02)
-#define SM501_I2C_SLAVE_ADDRESS		(0x03)
-#define SM501_I2C_DATA			(0x04)
-
-/* SSP base */
-#define SM501_SSP			(0x020000)
-
-/* Uart 0 base */
-#define SM501_UART0			(0x030000)
-
-/* Uart 1 base */
-#define SM501_UART1			(0x030020)
-
-/* USB host port base */
-#define SM501_USB_HOST			(0x040000)
-
-/* USB slave/gadget base */
-#define SM501_USB_GADGET		(0x060000)
-
-/* USB slave/gadget data port base */
-#define SM501_USB_GADGET_DATA		(0x070000)
-
-/* Display controller/video engine base */
-#define SM501_DC			(0x080000)
-
-/* common defines for the SM501 address registers */
-#define SM501_ADDR_FLIP			(1<<31)
-#define SM501_ADDR_EXT			(1<<27)
-#define SM501_ADDR_CS1			(1<<26)
-#define SM501_ADDR_MASK			(0x3f << 26)
-
-#define SM501_FIFO_MASK			(0x3 << 16)
-#define SM501_FIFO_1			(0x0 << 16)
-#define SM501_FIFO_3			(0x1 << 16)
-#define SM501_FIFO_7			(0x2 << 16)
-#define SM501_FIFO_11			(0x3 << 16)
-
-/* common registers for panel and the crt */
-#define SM501_OFF_DC_H_TOT		(0x000)
-#define SM501_OFF_DC_V_TOT		(0x008)
-#define SM501_OFF_DC_H_SYNC		(0x004)
-#define SM501_OFF_DC_V_SYNC		(0x00C)
-
-#define SM501_DC_PANEL_CONTROL		(0x000)
-
-#define SM501_DC_PANEL_CONTROL_FPEN	(1<<27)
-#define SM501_DC_PANEL_CONTROL_BIAS	(1<<26)
-#define SM501_DC_PANEL_CONTROL_DATA	(1<<25)
-#define SM501_DC_PANEL_CONTROL_VDD	(1<<24)
-#define SM501_DC_PANEL_CONTROL_DP	(1<<23)
-
-#define SM501_DC_PANEL_CONTROL_TFT_888	(0<<21)
-#define SM501_DC_PANEL_CONTROL_TFT_333	(1<<21)
-#define SM501_DC_PANEL_CONTROL_TFT_444	(2<<21)
-
-#define SM501_DC_PANEL_CONTROL_DE	(1<<20)
-
-#define SM501_DC_PANEL_CONTROL_LCD_TFT	(0<<18)
-#define SM501_DC_PANEL_CONTROL_LCD_STN8	(1<<18)
-#define SM501_DC_PANEL_CONTROL_LCD_STN12 (2<<18)
-
-#define SM501_DC_PANEL_CONTROL_CP	(1<<14)
-#define SM501_DC_PANEL_CONTROL_VSP	(1<<13)
-#define SM501_DC_PANEL_CONTROL_HSP	(1<<12)
-#define SM501_DC_PANEL_CONTROL_CK	(1<<9)
-#define SM501_DC_PANEL_CONTROL_TE	(1<<8)
-#define SM501_DC_PANEL_CONTROL_VPD	(1<<7)
-#define SM501_DC_PANEL_CONTROL_VP	(1<<6)
-#define SM501_DC_PANEL_CONTROL_HPD	(1<<5)
-#define SM501_DC_PANEL_CONTROL_HP	(1<<4)
-#define SM501_DC_PANEL_CONTROL_GAMMA	(1<<3)
-#define SM501_DC_PANEL_CONTROL_EN	(1<<2)
-
-#define SM501_DC_PANEL_CONTROL_8BPP	(0<<0)
-#define SM501_DC_PANEL_CONTROL_16BPP	(1<<0)
-#define SM501_DC_PANEL_CONTROL_32BPP	(2<<0)
-
-
-#define SM501_DC_PANEL_PANNING_CONTROL	(0x004)
-#define SM501_DC_PANEL_COLOR_KEY	(0x008)
-#define SM501_DC_PANEL_FB_ADDR		(0x00C)
-#define SM501_DC_PANEL_FB_OFFSET	(0x010)
-#define SM501_DC_PANEL_FB_WIDTH		(0x014)
-#define SM501_DC_PANEL_FB_HEIGHT	(0x018)
-#define SM501_DC_PANEL_TL_LOC		(0x01C)
-#define SM501_DC_PANEL_BR_LOC		(0x020)
-#define SM501_DC_PANEL_H_TOT		(0x024)
-#define SM501_DC_PANEL_H_SYNC		(0x028)
-#define SM501_DC_PANEL_V_TOT		(0x02C)
-#define SM501_DC_PANEL_V_SYNC		(0x030)
-#define SM501_DC_PANEL_CUR_LINE		(0x034)
-
-#define SM501_DC_VIDEO_CONTROL		(0x040)
-#define SM501_DC_VIDEO_FB0_ADDR		(0x044)
-#define SM501_DC_VIDEO_FB_WIDTH		(0x048)
-#define SM501_DC_VIDEO_FB0_LAST_ADDR	(0x04C)
-#define SM501_DC_VIDEO_TL_LOC		(0x050)
-#define SM501_DC_VIDEO_BR_LOC		(0x054)
-#define SM501_DC_VIDEO_SCALE		(0x058)
-#define SM501_DC_VIDEO_INIT_SCALE	(0x05C)
-#define SM501_DC_VIDEO_YUV_CONSTANTS	(0x060)
-#define SM501_DC_VIDEO_FB1_ADDR		(0x064)
-#define SM501_DC_VIDEO_FB1_LAST_ADDR	(0x068)
-
-#define SM501_DC_VIDEO_ALPHA_CONTROL	(0x080)
-#define SM501_DC_VIDEO_ALPHA_FB_ADDR	(0x084)
-#define SM501_DC_VIDEO_ALPHA_FB_OFFSET	(0x088)
-#define SM501_DC_VIDEO_ALPHA_FB_LAST_ADDR	(0x08C)
-#define SM501_DC_VIDEO_ALPHA_TL_LOC	(0x090)
-#define SM501_DC_VIDEO_ALPHA_BR_LOC	(0x094)
-#define SM501_DC_VIDEO_ALPHA_SCALE	(0x098)
-#define SM501_DC_VIDEO_ALPHA_INIT_SCALE	(0x09C)
-#define SM501_DC_VIDEO_ALPHA_CHROMA_KEY	(0x0A0)
-#define SM501_DC_VIDEO_ALPHA_COLOR_LOOKUP	(0x0A4)
-
-#define SM501_DC_PANEL_HWC_BASE		(0x0F0)
-#define SM501_DC_PANEL_HWC_ADDR		(0x0F0)
-#define SM501_DC_PANEL_HWC_LOC		(0x0F4)
-#define SM501_DC_PANEL_HWC_COLOR_1_2	(0x0F8)
-#define SM501_DC_PANEL_HWC_COLOR_3	(0x0FC)
-
-#define SM501_HWC_EN			(1<<31)
-
-#define SM501_OFF_HWC_ADDR		(0x00)
-#define SM501_OFF_HWC_LOC		(0x04)
-#define SM501_OFF_HWC_COLOR_1_2		(0x08)
-#define SM501_OFF_HWC_COLOR_3		(0x0C)
-
-#define SM501_DC_ALPHA_CONTROL		(0x100)
-#define SM501_DC_ALPHA_FB_ADDR		(0x104)
-#define SM501_DC_ALPHA_FB_OFFSET	(0x108)
-#define SM501_DC_ALPHA_TL_LOC		(0x10C)
-#define SM501_DC_ALPHA_BR_LOC		(0x110)
-#define SM501_DC_ALPHA_CHROMA_KEY	(0x114)
-#define SM501_DC_ALPHA_COLOR_LOOKUP	(0x118)
-
-#define SM501_DC_CRT_CONTROL		(0x200)
-
-#define SM501_DC_CRT_CONTROL_TVP	(1<<15)
-#define SM501_DC_CRT_CONTROL_CP		(1<<14)
-#define SM501_DC_CRT_CONTROL_VSP	(1<<13)
-#define SM501_DC_CRT_CONTROL_HSP	(1<<12)
-#define SM501_DC_CRT_CONTROL_VS		(1<<11)
-#define SM501_DC_CRT_CONTROL_BLANK	(1<<10)
-#define SM501_DC_CRT_CONTROL_SEL	(1<<9)
-#define SM501_DC_CRT_CONTROL_TE		(1<<8)
-#define SM501_DC_CRT_CONTROL_PIXEL_MASK (0xF << 4)
-#define SM501_DC_CRT_CONTROL_GAMMA	(1<<3)
-#define SM501_DC_CRT_CONTROL_ENABLE	(1<<2)
-
-#define SM501_DC_CRT_CONTROL_8BPP	(0<<0)
-#define SM501_DC_CRT_CONTROL_16BPP	(1<<0)
-#define SM501_DC_CRT_CONTROL_32BPP	(2<<0)
-
-#define SM501_DC_CRT_FB_ADDR		(0x204)
-#define SM501_DC_CRT_FB_OFFSET		(0x208)
-#define SM501_DC_CRT_H_TOT		(0x20C)
-#define SM501_DC_CRT_H_SYNC		(0x210)
-#define SM501_DC_CRT_V_TOT		(0x214)
-#define SM501_DC_CRT_V_SYNC		(0x218)
-#define SM501_DC_CRT_SIGNATURE_ANALYZER	(0x21C)
-#define SM501_DC_CRT_CUR_LINE		(0x220)
-#define SM501_DC_CRT_MONITOR_DETECT	(0x224)
-
-#define SM501_DC_CRT_HWC_BASE		(0x230)
-#define SM501_DC_CRT_HWC_ADDR		(0x230)
-#define SM501_DC_CRT_HWC_LOC		(0x234)
-#define SM501_DC_CRT_HWC_COLOR_1_2	(0x238)
-#define SM501_DC_CRT_HWC_COLOR_3	(0x23C)
-
-#define SM501_DC_PANEL_PALETTE		(0x400)
-
-#define SM501_DC_VIDEO_PALETTE		(0x800)
-
-#define SM501_DC_CRT_PALETTE		(0xC00)
-
-/* Zoom Video port base */
-#define SM501_ZVPORT			(0x090000)
-
-/* AC97/I2S base */
-#define SM501_AC97			(0x0A0000)
-
-/* 8051 micro controller base */
-#define SM501_UCONTROLLER		(0x0B0000)
-
-/* 8051 micro controller SRAM base */
-#define SM501_UCONTROLLER_SRAM		(0x0C0000)
-
-/* DMA base */
-#define SM501_DMA			(0x0D0000)
-
-/* 2d engine base */
-#define SM501_2D_ENGINE			(0x100000)
-#define SM501_2D_SOURCE			(0x00)
-#define SM501_2D_DESTINATION		(0x04)
-#define SM501_2D_DIMENSION		(0x08)
-#define SM501_2D_CONTROL		(0x0C)
-#define SM501_2D_PITCH			(0x10)
-#define SM501_2D_FOREGROUND		(0x14)
-#define SM501_2D_BACKGROUND		(0x18)
-#define SM501_2D_STRETCH		(0x1C)
-#define SM501_2D_COLOR_COMPARE		(0x20)
-#define SM501_2D_COLOR_COMPARE_MASK 	(0x24)
-#define SM501_2D_MASK			(0x28)
-#define SM501_2D_CLIP_TL		(0x2C)
-#define SM501_2D_CLIP_BR		(0x30)
-#define SM501_2D_MONO_PATTERN_LOW	(0x34)
-#define SM501_2D_MONO_PATTERN_HIGH	(0x38)
-#define SM501_2D_WINDOW_WIDTH		(0x3C)
-#define SM501_2D_SOURCE_BASE		(0x40)
-#define SM501_2D_DESTINATION_BASE	(0x44)
-#define SM501_2D_ALPHA			(0x48)
-#define SM501_2D_WRAP			(0x4C)
-#define SM501_2D_STATUS			(0x50)
-
-#define SM501_CSC_Y_SOURCE_BASE		(0xC8)
-#define SM501_CSC_CONSTANTS		(0xCC)
-#define SM501_CSC_Y_SOURCE_X		(0xD0)
-#define SM501_CSC_Y_SOURCE_Y		(0xD4)
-#define SM501_CSC_U_SOURCE_BASE		(0xD8)
-#define SM501_CSC_V_SOURCE_BASE		(0xDC)
-#define SM501_CSC_SOURCE_DIMENSION	(0xE0)
-#define SM501_CSC_SOURCE_PITCH		(0xE4)
-#define SM501_CSC_DESTINATION		(0xE8)
-#define SM501_CSC_DESTINATION_DIMENSION	(0xEC)
-#define SM501_CSC_DESTINATION_PITCH	(0xF0)
-#define SM501_CSC_SCALE_FACTOR		(0xF4)
-#define SM501_CSC_DESTINATION_BASE	(0xF8)
-#define SM501_CSC_CONTROL		(0xFC)
-
-/* 2d engine data port base */
-#define SM501_2D_ENGINE_DATA		(0x110000)
-
-/* end of register definitions */
-
-#define SM501_HWC_WIDTH                       (64)
-#define SM501_HWC_HEIGHT                      (64)
-
-/* SM501 local memory size taken from "linux/drivers/mfd/sm501.c" */
-static const uint32_t sm501_mem_local_size[] = {
-	[0]	= 4*1024*1024,
-	[1]	= 8*1024*1024,
-	[2]	= 16*1024*1024,
-	[3]	= 32*1024*1024,
-	[4]	= 64*1024*1024,
-	[5]	= 2*1024*1024,
-};
-#define get_local_mem_size(s) sm501_mem_local_size[(s)->local_mem_size_index]
-
-typedef struct SM501State {
-    /* graphic console status */
-    QemuConsole *con;
-
-    /* status & internal resources */
-    hwaddr base;
-    uint32_t local_mem_size_index;
-    uint8_t * local_mem;
-    MemoryRegion local_mem_region;
-    uint32_t last_width;
-    uint32_t last_height;
-
-    /* mmio registers */
-    uint32_t system_control;
-    uint32_t misc_control;
-    uint32_t gpio_31_0_control;
-    uint32_t gpio_63_32_control;
-    uint32_t dram_control;
-    uint32_t irq_mask;
-    uint32_t misc_timing;
-    uint32_t power_mode_control;
-
-    uint32_t uart0_ier;
-    uint32_t uart0_lcr;
-    uint32_t uart0_mcr;
-    uint32_t uart0_scr;
-
-    uint8_t dc_palette[0x400 * 3];
-
-    uint32_t dc_panel_control;
-    uint32_t dc_panel_panning_control;
-    uint32_t dc_panel_fb_addr;
-    uint32_t dc_panel_fb_offset;
-    uint32_t dc_panel_fb_width;
-    uint32_t dc_panel_fb_height;
-    uint32_t dc_panel_tl_location;
-    uint32_t dc_panel_br_location;
-    uint32_t dc_panel_h_total;
-    uint32_t dc_panel_h_sync;
-    uint32_t dc_panel_v_total;
-    uint32_t dc_panel_v_sync;
-
-    uint32_t dc_panel_hwc_addr;
-    uint32_t dc_panel_hwc_location;
-    uint32_t dc_panel_hwc_color_1_2;
-    uint32_t dc_panel_hwc_color_3;
-
-    uint32_t dc_crt_control;
-    uint32_t dc_crt_fb_addr;
-    uint32_t dc_crt_fb_offset;
-    uint32_t dc_crt_h_total;
-    uint32_t dc_crt_h_sync;
-    uint32_t dc_crt_v_total;
-    uint32_t dc_crt_v_sync;
-
-    uint32_t dc_crt_hwc_addr;
-    uint32_t dc_crt_hwc_location;
-    uint32_t dc_crt_hwc_color_1_2;
-    uint32_t dc_crt_hwc_color_3;
-
-    uint32_t twoD_source;
-    uint32_t twoD_destination;
-    uint32_t twoD_dimension;
-    uint32_t twoD_control;
-    uint32_t twoD_pitch;
-    uint32_t twoD_foreground;
-    uint32_t twoD_stretch;
-    uint32_t twoD_color_compare_mask;
-    uint32_t twoD_mask;
-    uint32_t twoD_window_width;
-    uint32_t twoD_source_base;
-    uint32_t twoD_destination_base;
-
-} SM501State;
-
-static uint32_t get_local_mem_size_index(uint32_t size)
-{
-    uint32_t norm_size = 0;
-    int i, index = 0;
-
-    for (i = 0; i < ARRAY_SIZE(sm501_mem_local_size); i++) {
-	uint32_t new_size = sm501_mem_local_size[i];
-	if (new_size >= size) {
-	    if (norm_size == 0 || norm_size > new_size) {
-		norm_size = new_size;
-		index = i;
-	    }
-	}
-    }
-
-    return index;
-}
-
-/**
- * Check the availability of hardware cursor.
- * @param crt  0 for PANEL, 1 for CRT.
- */
-static inline int is_hwc_enabled(SM501State *state, int crt)
-{
-    uint32_t addr = crt ? state->dc_crt_hwc_addr : state->dc_panel_hwc_addr;
-    return addr & 0x80000000;
-}
-
-/**
- * Get the address which holds cursor pattern data.
- * @param crt  0 for PANEL, 1 for CRT.
- */
-static inline uint32_t get_hwc_address(SM501State *state, int crt)
-{
-    uint32_t addr = crt ? state->dc_crt_hwc_addr : state->dc_panel_hwc_addr;
-    return (addr & 0x03FFFFF0)/* >> 4*/;
-}
-
-/**
- * Get the cursor position in y coordinate.
- * @param crt  0 for PANEL, 1 for CRT.
- */
-static inline uint32_t get_hwc_y(SM501State *state, int crt)
-{
-    uint32_t location = crt ? state->dc_crt_hwc_location
-                            : state->dc_panel_hwc_location;
-    return (location & 0x07FF0000) >> 16;
-}
-
-/**
- * Get the cursor position in x coordinate.
- * @param crt  0 for PANEL, 1 for CRT.
- */
-static inline uint32_t get_hwc_x(SM501State *state, int crt)
-{
-    uint32_t location = crt ? state->dc_crt_hwc_location
-                            : state->dc_panel_hwc_location;
-    return location & 0x000007FF;
-}
-
-/**
- * Get the cursor position in x coordinate.
- * @param crt  0 for PANEL, 1 for CRT.
- * @param index  0, 1, 2 or 3 which specifies color of corsor dot.
- */
-static inline uint16_t get_hwc_color(SM501State *state, int crt, int index)
-{
-    uint32_t color_reg = 0;
-    uint16_t color_565 = 0;
-
-    if (index == 0) {
-        return 0;
-    }
-
-    switch (index) {
-    case 1:
-    case 2:
-        color_reg = crt ? state->dc_crt_hwc_color_1_2
-                        : state->dc_panel_hwc_color_1_2;
-        break;
-    case 3:
-        color_reg = crt ? state->dc_crt_hwc_color_3
-                        : state->dc_panel_hwc_color_3;
-        break;
-    default:
-        printf("invalid hw cursor color.\n");
-        abort();
-    }
-
-    switch (index) {
-    case 1:
-    case 3:
-        color_565 = (uint16_t)(color_reg & 0xFFFF);
-        break;
-    case 2:
-        color_565 = (uint16_t)((color_reg >> 16) & 0xFFFF);
-        break;
-    }
-    return color_565;
-}
-
-static int within_hwc_y_range(SM501State *state, int y, int crt)
-{
-    int hwc_y = get_hwc_y(state, crt);
-    return (hwc_y <= y && y < hwc_y + SM501_HWC_HEIGHT);
-}
-
-static void sm501_2d_operation(SM501State * s)
-{
-    /* obtain operation parameters */
-    int operation = (s->twoD_control >> 16) & 0x1f;
-    int rtl = s->twoD_control & 0x8000000;
-    int src_x = (s->twoD_source >> 16) & 0x01FFF;
-    int src_y = s->twoD_source & 0xFFFF;
-    int dst_x = (s->twoD_destination >> 16) & 0x01FFF;
-    int dst_y = s->twoD_destination & 0xFFFF;
-    int operation_width = (s->twoD_dimension >> 16) & 0x1FFF;
-    int operation_height = s->twoD_dimension & 0xFFFF;
-    uint32_t color = s->twoD_foreground;
-    int format_flags = (s->twoD_stretch >> 20) & 0x3;
-    int addressing = (s->twoD_stretch >> 16) & 0xF;
-
-    /* get frame buffer info */
-    uint8_t * src = s->local_mem + (s->twoD_source_base & 0x03FFFFFF);
-    uint8_t * dst = s->local_mem + (s->twoD_destination_base & 0x03FFFFFF);
-    int src_width = (s->dc_crt_h_total & 0x00000FFF) + 1;
-    int dst_width = (s->dc_crt_h_total & 0x00000FFF) + 1;
-
-    if (addressing != 0x0) {
-        printf("%s: only XY addressing is supported.\n", __func__);
-        abort();
-    }
-
-    if ((s->twoD_source_base & 0x08000000) ||
-        (s->twoD_destination_base & 0x08000000)) {
-        printf("%s: only local memory is supported.\n", __func__);
-        abort();
-    }
-
-    switch (operation) {
-    case 0x00: /* copy area */
-#define COPY_AREA(_bpp, _pixel_type, rtl) {                                 \
-        int y, x, index_d, index_s;                                         \
-        for (y = 0; y < operation_height; y++) {                            \
-            for (x = 0; x < operation_width; x++) {                         \
-                if (rtl) {                                                  \
-                    index_s = ((src_y - y) * src_width + src_x - x) * _bpp; \
-                    index_d = ((dst_y - y) * dst_width + dst_x - x) * _bpp; \
-                } else {                                                    \
-                    index_s = ((src_y + y) * src_width + src_x + x) * _bpp; \
-                    index_d = ((dst_y + y) * dst_width + dst_x + x) * _bpp; \
-                }                                                           \
-                *(_pixel_type*)&dst[index_d] = *(_pixel_type*)&src[index_s];\
-            }                                                               \
-        }                                                                   \
-    }
-        switch (format_flags) {
-        case 0:
-            COPY_AREA(1, uint8_t, rtl);
-            break;
-        case 1:
-            COPY_AREA(2, uint16_t, rtl);
-            break;
-        case 2:
-            COPY_AREA(4, uint32_t, rtl);
-            break;
-        }
-        break;
-
-    case 0x01: /* fill rectangle */
-#define FILL_RECT(_bpp, _pixel_type) {                                      \
-        int y, x;                                                           \
-        for (y = 0; y < operation_height; y++) {                            \
-            for (x = 0; x < operation_width; x++) {                         \
-                int index = ((dst_y + y) * dst_width + dst_x + x) * _bpp;   \
-                *(_pixel_type*)&dst[index] = (_pixel_type)color;            \
-            }                                                               \
-        }                                                                   \
-    }
-
-        switch (format_flags) {
-        case 0:
-            FILL_RECT(1, uint8_t);
-            break;
-        case 1:
-            FILL_RECT(2, uint16_t);
-            break;
-        case 2:
-            FILL_RECT(4, uint32_t);
-            break;
-        }
-        break;
-
-    default:
-        printf("non-implemented SM501 2D operation. %d\n", operation);
-        abort();
-        break;
-    }
-}
-
-static uint64_t sm501_system_config_read(void *opaque, hwaddr addr,
-                                         unsigned size)
-{
-    SM501State * s = (SM501State *)opaque;
-    uint32_t ret = 0;
-    SM501_DPRINTF("sm501 system config regs : read addr=%x\n", (int)addr);
-
-    switch(addr) {
-    case SM501_SYSTEM_CONTROL:
-	ret = s->system_control;
-	break;
-    case SM501_MISC_CONTROL:
-	ret = s->misc_control;
-	break;
-    case SM501_GPIO31_0_CONTROL:
-	ret = s->gpio_31_0_control;
-	break;
-    case SM501_GPIO63_32_CONTROL:
-	ret = s->gpio_63_32_control;
-	break;
-    case SM501_DEVICEID:
-	ret = 0x050100A0;
-	break;
-    case SM501_DRAM_CONTROL:
-	ret = (s->dram_control & 0x07F107C0) | s->local_mem_size_index << 13;
-	break;
-    case SM501_IRQ_MASK:
-	ret = s->irq_mask;
-	break;
-    case SM501_MISC_TIMING:
-	/* TODO : simulate gate control */
-	ret = s->misc_timing;
-	break;
-    case SM501_CURRENT_GATE:
-	/* TODO : simulate gate control */
-	ret = 0x00021807;
-	break;
-    case SM501_CURRENT_CLOCK:
-	ret = 0x2A1A0A09;
-	break;
-    case SM501_POWER_MODE_CONTROL:
-	ret = s->power_mode_control;
-	break;
-
-    default:
-	printf("sm501 system config : not implemented register read."
-	       " addr=%x\n", (int)addr);
-        abort();
-    }
-
-    return ret;
-}
-
-static void sm501_system_config_write(void *opaque, hwaddr addr,
-                                      uint64_t value, unsigned size)
-{
-    SM501State * s = (SM501State *)opaque;
-    SM501_DPRINTF("sm501 system config regs : write addr=%x, val=%x\n",
-		  (uint32_t)addr, (uint32_t)value);
-
-    switch(addr) {
-    case SM501_SYSTEM_CONTROL:
-	s->system_control = value & 0xE300B8F7;
-	break;
-    case SM501_MISC_CONTROL:
-	s->misc_control = value & 0xFF7FFF20;
-	break;
-    case SM501_GPIO31_0_CONTROL:
-	s->gpio_31_0_control = value;
-	break;
-    case SM501_GPIO63_32_CONTROL:
-	s->gpio_63_32_control = value;
-	break;
-    case SM501_DRAM_CONTROL:
-	s->local_mem_size_index = (value >> 13) & 0x7;
-	/* rODO : check validity of size change */
-	s->dram_control |=  value & 0x7FFFFFC3;
-	break;
-    case SM501_IRQ_MASK:
-	s->irq_mask = value;
-	break;
-    case SM501_MISC_TIMING:
-	s->misc_timing = value & 0xF31F1FFF;
-	break;
-    case SM501_POWER_MODE_0_GATE:
-    case SM501_POWER_MODE_1_GATE:
-    case SM501_POWER_MODE_0_CLOCK:
-    case SM501_POWER_MODE_1_CLOCK:
-	/* TODO : simulate gate & clock control */
-	break;
-    case SM501_POWER_MODE_CONTROL:
-	s->power_mode_control = value & 0x00000003;
-	break;
-
-    default:
-	printf("sm501 system config : not implemented register write."
-	       " addr=%x, val=%x\n", (int)addr, (uint32_t)value);
-        abort();
-    }
-}
-
-static const MemoryRegionOps sm501_system_config_ops = {
-    .read = sm501_system_config_read,
-    .write = sm501_system_config_write,
-    .valid = {
-        .min_access_size = 4,
-        .max_access_size = 4,
-    },
-    .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-static uint32_t sm501_palette_read(void *opaque, hwaddr addr)
-{
-    SM501State * s = (SM501State *)opaque;
-    SM501_DPRINTF("sm501 palette read addr=%x\n", (int)addr);
-
-    /* TODO : consider BYTE/WORD access */
-    /* TODO : consider endian */
-
-    assert(range_covers_byte(0, 0x400 * 3, addr));
-    return *(uint32_t*)&s->dc_palette[addr];
-}
-
-static void sm501_palette_write(void *opaque,
-				hwaddr addr, uint32_t value)
-{
-    SM501State * s = (SM501State *)opaque;
-    SM501_DPRINTF("sm501 palette write addr=%x, val=%x\n",
-		  (int)addr, value);
-
-    /* TODO : consider BYTE/WORD access */
-    /* TODO : consider endian */
-
-    assert(range_covers_byte(0, 0x400 * 3, addr));
-    *(uint32_t*)&s->dc_palette[addr] = value;
-}
-
-static uint64_t sm501_disp_ctrl_read(void *opaque, hwaddr addr,
-                                     unsigned size)
-{
-    SM501State * s = (SM501State *)opaque;
-    uint32_t ret = 0;
-    SM501_DPRINTF("sm501 disp ctrl regs : read addr=%x\n", (int)addr);
-
-    switch(addr) {
-
-    case SM501_DC_PANEL_CONTROL:
-	ret = s->dc_panel_control;
-	break;
-    case SM501_DC_PANEL_PANNING_CONTROL:
-	ret = s->dc_panel_panning_control;
-	break;
-    case SM501_DC_PANEL_FB_ADDR:
-	ret = s->dc_panel_fb_addr;
-	break;
-    case SM501_DC_PANEL_FB_OFFSET:
-	ret = s->dc_panel_fb_offset;
-	break;
-    case SM501_DC_PANEL_FB_WIDTH:
-	ret = s->dc_panel_fb_width;
-	break;
-    case SM501_DC_PANEL_FB_HEIGHT:
-	ret = s->dc_panel_fb_height;
-	break;
-    case SM501_DC_PANEL_TL_LOC:
-	ret = s->dc_panel_tl_location;
-	break;
-    case SM501_DC_PANEL_BR_LOC:
-	ret = s->dc_panel_br_location;
-	break;
-
-    case SM501_DC_PANEL_H_TOT:
-	ret = s->dc_panel_h_total;
-	break;
-    case SM501_DC_PANEL_H_SYNC:
-	ret = s->dc_panel_h_sync;
-	break;
-    case SM501_DC_PANEL_V_TOT:
-	ret = s->dc_panel_v_total;
-	break;
-    case SM501_DC_PANEL_V_SYNC:
-	ret = s->dc_panel_v_sync;
-	break;
-
-    case SM501_DC_CRT_CONTROL:
-	ret = s->dc_crt_control;
-	break;
-    case SM501_DC_CRT_FB_ADDR:
-	ret = s->dc_crt_fb_addr;
-	break;
-    case SM501_DC_CRT_FB_OFFSET:
-	ret = s->dc_crt_fb_offset;
-	break;
-    case SM501_DC_CRT_H_TOT:
-	ret = s->dc_crt_h_total;
-	break;
-    case SM501_DC_CRT_H_SYNC:
-	ret = s->dc_crt_h_sync;
-	break;
-    case SM501_DC_CRT_V_TOT:
-	ret = s->dc_crt_v_total;
-	break;
-    case SM501_DC_CRT_V_SYNC:
-	ret = s->dc_crt_v_sync;
-	break;
-
-    case SM501_DC_CRT_HWC_ADDR:
-	ret = s->dc_crt_hwc_addr;
-	break;
-    case SM501_DC_CRT_HWC_LOC:
-	ret = s->dc_crt_hwc_location;
-	break;
-    case SM501_DC_CRT_HWC_COLOR_1_2:
-	ret = s->dc_crt_hwc_color_1_2;
-	break;
-    case SM501_DC_CRT_HWC_COLOR_3:
-	ret = s->dc_crt_hwc_color_3;
-	break;
-
-    case SM501_DC_PANEL_PALETTE ... SM501_DC_PANEL_PALETTE + 0x400*3 - 4:
-        ret = sm501_palette_read(opaque, addr - SM501_DC_PANEL_PALETTE);
-        break;
-
-    default:
-	printf("sm501 disp ctrl : not implemented register read."
-	       " addr=%x\n", (int)addr);
-        abort();
-    }
-
-    return ret;
-}
-
-static void sm501_disp_ctrl_write(void *opaque, hwaddr addr,
-                                  uint64_t value, unsigned size)
-{
-    SM501State * s = (SM501State *)opaque;
-    SM501_DPRINTF("sm501 disp ctrl regs : write addr=%x, val=%x\n",
-		  (unsigned)addr, (unsigned)value);
-
-    switch(addr) {
-    case SM501_DC_PANEL_CONTROL:
-	s->dc_panel_control = value & 0x0FFF73FF;
-	break;
-    case SM501_DC_PANEL_PANNING_CONTROL:
-	s->dc_panel_panning_control = value & 0xFF3FFF3F;
-	break;
-    case SM501_DC_PANEL_FB_ADDR:
-	s->dc_panel_fb_addr = value & 0x8FFFFFF0;
-	break;
-    case SM501_DC_PANEL_FB_OFFSET:
-	s->dc_panel_fb_offset = value & 0x3FF03FF0;
-	break;
-    case SM501_DC_PANEL_FB_WIDTH:
-	s->dc_panel_fb_width = value & 0x0FFF0FFF;
-	break;
-    case SM501_DC_PANEL_FB_HEIGHT:
-	s->dc_panel_fb_height = value & 0x0FFF0FFF;
-	break;
-    case SM501_DC_PANEL_TL_LOC:
-	s->dc_panel_tl_location = value & 0x07FF07FF;
-	break;
-    case SM501_DC_PANEL_BR_LOC:
-	s->dc_panel_br_location = value & 0x07FF07FF;
-	break;
-
-    case SM501_DC_PANEL_H_TOT:
-	s->dc_panel_h_total = value & 0x0FFF0FFF;
-	break;
-    case SM501_DC_PANEL_H_SYNC:
-	s->dc_panel_h_sync = value & 0x00FF0FFF;
-	break;
-    case SM501_DC_PANEL_V_TOT:
-	s->dc_panel_v_total = value & 0x0FFF0FFF;
-	break;
-    case SM501_DC_PANEL_V_SYNC:
-	s->dc_panel_v_sync = value & 0x003F0FFF;
-	break;
-
-    case SM501_DC_PANEL_HWC_ADDR:
-	s->dc_panel_hwc_addr = value & 0x8FFFFFF0;
-	break;
-    case SM501_DC_PANEL_HWC_LOC:
-	s->dc_panel_hwc_location = value & 0x0FFF0FFF;
-	break;
-    case SM501_DC_PANEL_HWC_COLOR_1_2:
-	s->dc_panel_hwc_color_1_2 = value;
-	break;
-    case SM501_DC_PANEL_HWC_COLOR_3:
-	s->dc_panel_hwc_color_3 = value & 0x0000FFFF;
-	break;
-
-    case SM501_DC_CRT_CONTROL:
-	s->dc_crt_control = value & 0x0003FFFF;
-	break;
-    case SM501_DC_CRT_FB_ADDR:
-	s->dc_crt_fb_addr = value & 0x8FFFFFF0;
-	break;
-    case SM501_DC_CRT_FB_OFFSET:
-	s->dc_crt_fb_offset = value & 0x3FF03FF0;
-	break;
-    case SM501_DC_CRT_H_TOT:
-	s->dc_crt_h_total = value & 0x0FFF0FFF;
-	break;
-    case SM501_DC_CRT_H_SYNC:
-	s->dc_crt_h_sync = value & 0x00FF0FFF;
-	break;
-    case SM501_DC_CRT_V_TOT:
-	s->dc_crt_v_total = value & 0x0FFF0FFF;
-	break;
-    case SM501_DC_CRT_V_SYNC:
-	s->dc_crt_v_sync = value & 0x003F0FFF;
-	break;
-
-    case SM501_DC_CRT_HWC_ADDR:
-	s->dc_crt_hwc_addr = value & 0x8FFFFFF0;
-	break;
-    case SM501_DC_CRT_HWC_LOC:
-	s->dc_crt_hwc_location = value & 0x0FFF0FFF;
-	break;
-    case SM501_DC_CRT_HWC_COLOR_1_2:
-	s->dc_crt_hwc_color_1_2 = value;
-	break;
-    case SM501_DC_CRT_HWC_COLOR_3:
-	s->dc_crt_hwc_color_3 = value & 0x0000FFFF;
-	break;
-
-    case SM501_DC_PANEL_PALETTE ... SM501_DC_PANEL_PALETTE + 0x400*3 - 4:
-        sm501_palette_write(opaque, addr - SM501_DC_PANEL_PALETTE, value);
-        break;
-
-    default:
-	printf("sm501 disp ctrl : not implemented register write."
-	       " addr=%x, val=%x\n", (int)addr, (unsigned)value);
-        abort();
-    }
-}
-
-static const MemoryRegionOps sm501_disp_ctrl_ops = {
-    .read = sm501_disp_ctrl_read,
-    .write = sm501_disp_ctrl_write,
-    .valid = {
-        .min_access_size = 4,
-        .max_access_size = 4,
-    },
-    .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-static uint64_t sm501_2d_engine_read(void *opaque, hwaddr addr,
-                                     unsigned size)
-{
-    SM501State * s = (SM501State *)opaque;
-    uint32_t ret = 0;
-    SM501_DPRINTF("sm501 2d engine regs : read addr=%x\n", (int)addr);
-
-    switch(addr) {
-    case SM501_2D_SOURCE_BASE:
-        ret = s->twoD_source_base;
-        break;
-    default:
-        printf("sm501 disp ctrl : not implemented register read."
-               " addr=%x\n", (int)addr);
-        abort();
-    }
-
-    return ret;
-}
-
-static void sm501_2d_engine_write(void *opaque, hwaddr addr,
-                                  uint64_t value, unsigned size)
-{
-    SM501State * s = (SM501State *)opaque;
-    SM501_DPRINTF("sm501 2d engine regs : write addr=%x, val=%x\n",
-                  (unsigned)addr, (unsigned)value);
-
-    switch(addr) {
-    case SM501_2D_SOURCE:
-        s->twoD_source = value;
-        break;
-    case SM501_2D_DESTINATION:
-        s->twoD_destination = value;
-        break;
-    case SM501_2D_DIMENSION:
-        s->twoD_dimension = value;
-        break;
-    case SM501_2D_CONTROL:
-        s->twoD_control = value;
-
-        /* do 2d operation if start flag is set. */
-        if (value & 0x80000000) {
-            sm501_2d_operation(s);
-            s->twoD_control &= ~0x80000000; /* start flag down */
-        }
-
-        break;
-    case SM501_2D_PITCH:
-        s->twoD_pitch = value;
-        break;
-    case SM501_2D_FOREGROUND:
-        s->twoD_foreground = value;
-        break;
-    case SM501_2D_STRETCH:
-        s->twoD_stretch = value;
-        break;
-    case SM501_2D_COLOR_COMPARE_MASK:
-        s->twoD_color_compare_mask = value;
-        break;
-    case SM501_2D_MASK:
-        s->twoD_mask = value;
-        break;
-    case SM501_2D_WINDOW_WIDTH:
-        s->twoD_window_width = value;
-        break;
-    case SM501_2D_SOURCE_BASE:
-        s->twoD_source_base = value;
-        break;
-    case SM501_2D_DESTINATION_BASE:
-        s->twoD_destination_base = value;
-        break;
-    default:
-        printf("sm501 2d engine : not implemented register write."
-               " addr=%x, val=%x\n", (int)addr, (unsigned)value);
-        abort();
-    }
-}
-
-static const MemoryRegionOps sm501_2d_engine_ops = {
-    .read = sm501_2d_engine_read,
-    .write = sm501_2d_engine_write,
-    .valid = {
-        .min_access_size = 4,
-        .max_access_size = 4,
-    },
-    .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-/* draw line functions for all console modes */
-
-typedef void draw_line_func(uint8_t *d, const uint8_t *s,
-			    int width, const uint32_t *pal);
-
-typedef void draw_hwc_line_func(SM501State * s, int crt, uint8_t * palette,
-                                int c_y, uint8_t *d, int width);
-
-#define DEPTH 8
-#include "hw/sm501_template.h"
-
-#define DEPTH 15
-#include "hw/sm501_template.h"
-
-#define BGR_FORMAT
-#define DEPTH 15
-#include "hw/sm501_template.h"
-
-#define DEPTH 16
-#include "hw/sm501_template.h"
-
-#define BGR_FORMAT
-#define DEPTH 16
-#include "hw/sm501_template.h"
-
-#define DEPTH 32
-#include "hw/sm501_template.h"
-
-#define BGR_FORMAT
-#define DEPTH 32
-#include "hw/sm501_template.h"
-
-static draw_line_func * draw_line8_funcs[] = {
-    draw_line8_8,
-    draw_line8_15,
-    draw_line8_16,
-    draw_line8_32,
-    draw_line8_32bgr,
-    draw_line8_15bgr,
-    draw_line8_16bgr,
-};
-
-static draw_line_func * draw_line16_funcs[] = {
-    draw_line16_8,
-    draw_line16_15,
-    draw_line16_16,
-    draw_line16_32,
-    draw_line16_32bgr,
-    draw_line16_15bgr,
-    draw_line16_16bgr,
-};
-
-static draw_line_func * draw_line32_funcs[] = {
-    draw_line32_8,
-    draw_line32_15,
-    draw_line32_16,
-    draw_line32_32,
-    draw_line32_32bgr,
-    draw_line32_15bgr,
-    draw_line32_16bgr,
-};
-
-static draw_hwc_line_func * draw_hwc_line_funcs[] = {
-    draw_hwc_line_8,
-    draw_hwc_line_15,
-    draw_hwc_line_16,
-    draw_hwc_line_32,
-    draw_hwc_line_32bgr,
-    draw_hwc_line_15bgr,
-    draw_hwc_line_16bgr,
-};
-
-static inline int get_depth_index(DisplaySurface *surface)
-{
-    switch (surface_bits_per_pixel(surface)) {
-    default:
-    case 8:
-	return 0;
-    case 15:
-        return 1;
-    case 16:
-        return 2;
-    case 32:
-        if (is_surface_bgr(surface)) {
-            return 4;
-        } else {
-            return 3;
-        }
-    }
-}
-
-static void sm501_draw_crt(SM501State * s)
-{
-    DisplaySurface *surface = qemu_console_surface(s->con);
-    int y;
-    int width = (s->dc_crt_h_total & 0x00000FFF) + 1;
-    int height = (s->dc_crt_v_total & 0x00000FFF) + 1;
-
-    uint8_t  * src = s->local_mem;
-    int src_bpp = 0;
-    int dst_bpp = surface_bytes_per_pixel(surface);
-    uint32_t * palette = (uint32_t *)&s->dc_palette[SM501_DC_CRT_PALETTE
-						    - SM501_DC_PANEL_PALETTE];
-    uint8_t hwc_palette[3 * 3];
-    int ds_depth_index = get_depth_index(surface);
-    draw_line_func * draw_line = NULL;
-    draw_hwc_line_func * draw_hwc_line = NULL;
-    int full_update = 0;
-    int y_start = -1;
-    ram_addr_t page_min = ~0l;
-    ram_addr_t page_max = 0l;
-    ram_addr_t offset = 0;
-
-    /* choose draw_line function */
-    switch (s->dc_crt_control & 3) {
-    case SM501_DC_CRT_CONTROL_8BPP:
-	src_bpp = 1;
-	draw_line = draw_line8_funcs[ds_depth_index];
-	break;
-    case SM501_DC_CRT_CONTROL_16BPP:
-	src_bpp = 2;
-	draw_line = draw_line16_funcs[ds_depth_index];
-	break;
-    case SM501_DC_CRT_CONTROL_32BPP:
-	src_bpp = 4;
-	draw_line = draw_line32_funcs[ds_depth_index];
-	break;
-    default:
-	printf("sm501 draw crt : invalid DC_CRT_CONTROL=%x.\n",
-	       s->dc_crt_control);
-        abort();
-	break;
-    }
-
-    /* set up to draw hardware cursor */
-    if (is_hwc_enabled(s, 1)) {
-        int i;
-
-        /* get cursor palette */
-        for (i = 0; i < 3; i++) {
-            uint16_t rgb565 = get_hwc_color(s, 1, i + 1);
-            hwc_palette[i * 3 + 0] = (rgb565 & 0xf800) >> 8; /* red */
-            hwc_palette[i * 3 + 1] = (rgb565 & 0x07e0) >> 3; /* green */
-            hwc_palette[i * 3 + 2] = (rgb565 & 0x001f) << 3; /* blue */
-        }
-
-        /* choose cursor draw line function */
-        draw_hwc_line = draw_hwc_line_funcs[ds_depth_index];
-    }
-
-    /* adjust console size */
-    if (s->last_width != width || s->last_height != height) {
-        qemu_console_resize(s->con, width, height);
-        surface = qemu_console_surface(s->con);
-	s->last_width = width;
-	s->last_height = height;
-	full_update = 1;
-    }
-
-    /* draw each line according to conditions */
-    for (y = 0; y < height; y++) {
-	int update_hwc = draw_hwc_line ? within_hwc_y_range(s, y, 1) : 0;
-	int update = full_update || update_hwc;
-        ram_addr_t page0 = offset;
-        ram_addr_t page1 = offset + width * src_bpp - 1;
-
-	/* check dirty flags for each line */
-        update = memory_region_get_dirty(&s->local_mem_region, page0,
-                                         page1 - page0, DIRTY_MEMORY_VGA);
-
-	/* draw line and change status */
-	if (update) {
-            uint8_t *d = surface_data(surface);
-            d +=  y * width * dst_bpp;
-
-            /* draw graphics layer */
-            draw_line(d, src, width, palette);
-
-            /* draw haredware cursor */
-            if (update_hwc) {
-                draw_hwc_line(s, 1, hwc_palette, y - get_hwc_y(s, 1), d, width);
-            }
-
-	    if (y_start < 0)
-		y_start = y;
-	    if (page0 < page_min)
-		page_min = page0;
-	    if (page1 > page_max)
-		page_max = page1;
-	} else {
-	    if (y_start >= 0) {
-		/* flush to display */
-                dpy_gfx_update(s->con, 0, y_start, width, y - y_start);
-		y_start = -1;
-	    }
-	}
-
-	src += width * src_bpp;
-	offset += width * src_bpp;
-    }
-
-    /* complete flush to display */
-    if (y_start >= 0)
-        dpy_gfx_update(s->con, 0, y_start, width, y - y_start);
-
-    /* clear dirty flags */
-    if (page_min != ~0l) {
-	memory_region_reset_dirty(&s->local_mem_region,
-                                  page_min, page_max + TARGET_PAGE_SIZE,
-                                  DIRTY_MEMORY_VGA);
-    }
-}
-
-static void sm501_update_display(void *opaque)
-{
-    SM501State * s = (SM501State *)opaque;
-
-    if (s->dc_crt_control & SM501_DC_CRT_CONTROL_ENABLE)
-	sm501_draw_crt(s);
-}
-
-void sm501_init(MemoryRegion *address_space_mem, uint32_t base,
-                uint32_t local_mem_bytes, qemu_irq irq, CharDriverState *chr)
-{
-    SM501State * s;
-    DeviceState *dev;
-    MemoryRegion *sm501_system_config = g_new(MemoryRegion, 1);
-    MemoryRegion *sm501_disp_ctrl = g_new(MemoryRegion, 1);
-    MemoryRegion *sm501_2d_engine = g_new(MemoryRegion, 1);
-
-    /* allocate management data region */
-    s = (SM501State *)g_malloc0(sizeof(SM501State));
-    s->base = base;
-    s->local_mem_size_index
-	= get_local_mem_size_index(local_mem_bytes);
-    SM501_DPRINTF("local mem size=%x. index=%d\n", get_local_mem_size(s),
-		  s->local_mem_size_index);
-    s->system_control = 0x00100000;
-    s->misc_control = 0x00001000; /* assumes SH, active=low */
-    s->dc_panel_control = 0x00010000;
-    s->dc_crt_control = 0x00010000;
-
-    /* allocate local memory */
-    memory_region_init_ram(&s->local_mem_region, "sm501.local",
-                           local_mem_bytes);
-    vmstate_register_ram_global(&s->local_mem_region);
-    s->local_mem = memory_region_get_ram_ptr(&s->local_mem_region);
-    memory_region_add_subregion(address_space_mem, base, &s->local_mem_region);
-
-    /* map mmio */
-    memory_region_init_io(sm501_system_config, &sm501_system_config_ops, s,
-                          "sm501-system-config", 0x6c);
-    memory_region_add_subregion(address_space_mem, base + MMIO_BASE_OFFSET,
-                                sm501_system_config);
-    memory_region_init_io(sm501_disp_ctrl, &sm501_disp_ctrl_ops, s,
-                          "sm501-disp-ctrl", 0x1000);
-    memory_region_add_subregion(address_space_mem,
-                                base + MMIO_BASE_OFFSET + SM501_DC,
-                                sm501_disp_ctrl);
-    memory_region_init_io(sm501_2d_engine, &sm501_2d_engine_ops, s,
-                          "sm501-2d-engine", 0x54);
-    memory_region_add_subregion(address_space_mem,
-                                base + MMIO_BASE_OFFSET + SM501_2D_ENGINE,
-                                sm501_2d_engine);
-
-    /* bridge to usb host emulation module */
-    dev = qdev_create(NULL, "sysbus-ohci");
-    qdev_prop_set_uint32(dev, "num-ports", 2);
-    qdev_prop_set_taddr(dev, "dma-offset", base);
-    qdev_init_nofail(dev);
-    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0,
-                    base + MMIO_BASE_OFFSET + SM501_USB_HOST);
-    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq);
-
-    /* bridge to serial emulation module */
-    if (chr) {
-        serial_mm_init(address_space_mem,
-                       base + MMIO_BASE_OFFSET + SM501_UART0, 2,
-                       NULL, /* TODO : chain irq to IRL */
-                       115200, chr, DEVICE_NATIVE_ENDIAN);
-    }
-
-    /* create qemu graphic console */
-    s->con = graphic_console_init(sm501_update_display, NULL,
-                                  NULL, NULL, s);
-}