diff options
| author | Bin Meng <bin.meng@windriver.com> | 2021-01-26 14:00:02 +0800 |
|---|---|---|
| committer | Alistair Francis <alistair.francis@wdc.com> | 2021-03-04 09:43:29 -0500 |
| commit | 145b299139da92fb1b1048b393865bc96597d6b9 (patch) | |
| tree | 133ebe15a5db2037bdeece75cbdb314d349917ea /hw/riscv/Kconfig | |
| parent | 0694dabe9763847f3010b54ab3ec7d367d2f0ff0 (diff) | |
hw/riscv: sifive_u: Add QSPI0 controller and connect a flash
This adds the QSPI0 controller to the SoC, and connects an ISSI
25WP256 flash to it. The generation of corresponding device tree
source fragment is also added.
Since the direct memory-mapped mode is not supported by the SiFive
SPI model, the <reg> property does not populate the second group
which represents the memory mapped address of the SPI flash.
With this commit, upstream U-Boot for the SiFive HiFive Unleashed
board can boot on QEMU 'sifive_u' out of the box. This allows users
to develop and test the recommended RISC-V boot flow with a real
world use case: ZSBL (in QEMU) loads U-Boot SPL from SPI flash to
L2LIM, then U-Boot SPL loads the payload from SPI flash that is
combined with OpenSBI fw_dynamic firmware and U-Boot proper.
Specify machine property `msel` to 6 to allow booting from the SPI
flash. U-Boot spl is directly loaded via `-bios`, and subsequent
payload is stored in the SPI flash image. Example command line:
$ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -smp 5 -m 8G \
-bios u-boot-spl.bin -drive file=spi-nor.img,if=mtd
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-5-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Diffstat (limited to 'hw/riscv/Kconfig')
| -rw-r--r-- | hw/riscv/Kconfig | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index facb0cbacc..6330297b4e 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -52,9 +52,11 @@ config SIFIVE_U select SIFIVE_GPIO select SIFIVE_PDMA select SIFIVE_PLIC + select SIFIVE_SPI select SIFIVE_UART select SIFIVE_U_OTP select SIFIVE_U_PRCI + select SSI_M25P80 select UNIMP config SPIKE |