hw: move target-independent files to subdirectories

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 527 insertions, 0 deletions

diff --git a/hw/input/pckbd.c b/hw/input/pckbd.c
new file mode 100644
index 0000000000..08ceb9fe8a
--- /dev/null
+++ b/hw/input/pckbd.c
@@ -0,0 +1,527 @@
+/*
+ * QEMU PC keyboard emulation
+ *
+ * Copyright (c) 2003 Fabrice Bellard
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include "hw/hw.h"
+#include "hw/isa/isa.h"
+#include "hw/i386/pc.h"
+#include "hw/input/ps2.h"
+#include "sysemu/sysemu.h"
+
+/* debug PC keyboard */
+//#define DEBUG_KBD
+#ifdef DEBUG_KBD
+#define DPRINTF(fmt, ...)                                       \
+    do { printf("KBD: " fmt , ## __VA_ARGS__); } while (0)
+#else
+#define DPRINTF(fmt, ...)
+#endif
+
+/*	Keyboard Controller Commands */
+#define KBD_CCMD_READ_MODE	0x20	/* Read mode bits */
+#define KBD_CCMD_WRITE_MODE	0x60	/* Write mode bits */
+#define KBD_CCMD_GET_VERSION	0xA1	/* Get controller version */
+#define KBD_CCMD_MOUSE_DISABLE	0xA7	/* Disable mouse interface */
+#define KBD_CCMD_MOUSE_ENABLE	0xA8	/* Enable mouse interface */
+#define KBD_CCMD_TEST_MOUSE	0xA9	/* Mouse interface test */
+#define KBD_CCMD_SELF_TEST	0xAA	/* Controller self test */
+#define KBD_CCMD_KBD_TEST	0xAB	/* Keyboard interface test */
+#define KBD_CCMD_KBD_DISABLE	0xAD	/* Keyboard interface disable */
+#define KBD_CCMD_KBD_ENABLE	0xAE	/* Keyboard interface enable */
+#define KBD_CCMD_READ_INPORT    0xC0    /* read input port */
+#define KBD_CCMD_READ_OUTPORT	0xD0    /* read output port */
+#define KBD_CCMD_WRITE_OUTPORT	0xD1    /* write output port */
+#define KBD_CCMD_WRITE_OBUF	0xD2
+#define KBD_CCMD_WRITE_AUX_OBUF	0xD3    /* Write to output buffer as if
+					   initiated by the auxiliary device */
+#define KBD_CCMD_WRITE_MOUSE	0xD4	/* Write the following byte to the mouse */
+#define KBD_CCMD_DISABLE_A20    0xDD    /* HP vectra only ? */
+#define KBD_CCMD_ENABLE_A20     0xDF    /* HP vectra only ? */
+#define KBD_CCMD_PULSE_BITS_3_0 0xF0    /* Pulse bits 3-0 of the output port P2. */
+#define KBD_CCMD_RESET          0xFE    /* Pulse bit 0 of the output port P2 = CPU reset. */
+#define KBD_CCMD_NO_OP          0xFF    /* Pulse no bits of the output port P2. */
+
+/* Keyboard Commands */
+#define KBD_CMD_SET_LEDS	0xED	/* Set keyboard leds */
+#define KBD_CMD_ECHO     	0xEE
+#define KBD_CMD_GET_ID 	        0xF2	/* get keyboard ID */
+#define KBD_CMD_SET_RATE	0xF3	/* Set typematic rate */
+#define KBD_CMD_ENABLE		0xF4	/* Enable scanning */
+#define KBD_CMD_RESET_DISABLE	0xF5	/* reset and disable scanning */
+#define KBD_CMD_RESET_ENABLE   	0xF6    /* reset and enable scanning */
+#define KBD_CMD_RESET		0xFF	/* Reset */
+
+/* Keyboard Replies */
+#define KBD_REPLY_POR		0xAA	/* Power on reset */
+#define KBD_REPLY_ACK		0xFA	/* Command ACK */
+#define KBD_REPLY_RESEND	0xFE	/* Command NACK, send the cmd again */
+
+/* Status Register Bits */
+#define KBD_STAT_OBF 		0x01	/* Keyboard output buffer full */
+#define KBD_STAT_IBF 		0x02	/* Keyboard input buffer full */
+#define KBD_STAT_SELFTEST	0x04	/* Self test successful */
+#define KBD_STAT_CMD		0x08	/* Last write was a command write (0=data) */
+#define KBD_STAT_UNLOCKED	0x10	/* Zero if keyboard locked */
+#define KBD_STAT_MOUSE_OBF	0x20	/* Mouse output buffer full */
+#define KBD_STAT_GTO 		0x40	/* General receive/xmit timeout */
+#define KBD_STAT_PERR 		0x80	/* Parity error */
+
+/* Controller Mode Register Bits */
+#define KBD_MODE_KBD_INT	0x01	/* Keyboard data generate IRQ1 */
+#define KBD_MODE_MOUSE_INT	0x02	/* Mouse data generate IRQ12 */
+#define KBD_MODE_SYS 		0x04	/* The system flag (?) */
+#define KBD_MODE_NO_KEYLOCK	0x08	/* The keylock doesn't affect the keyboard if set */
+#define KBD_MODE_DISABLE_KBD	0x10	/* Disable keyboard interface */
+#define KBD_MODE_DISABLE_MOUSE	0x20	/* Disable mouse interface */
+#define KBD_MODE_KCC 		0x40	/* Scan code conversion to PC format */
+#define KBD_MODE_RFU		0x80
+
+/* Output Port Bits */
+#define KBD_OUT_RESET           0x01    /* 1=normal mode, 0=reset */
+#define KBD_OUT_A20             0x02    /* x86 only */
+#define KBD_OUT_OBF             0x10    /* Keyboard output buffer full */
+#define KBD_OUT_MOUSE_OBF       0x20    /* Mouse output buffer full */
+
+/* Mouse Commands */
+#define AUX_SET_SCALE11		0xE6	/* Set 1:1 scaling */
+#define AUX_SET_SCALE21		0xE7	/* Set 2:1 scaling */
+#define AUX_SET_RES		0xE8	/* Set resolution */
+#define AUX_GET_SCALE		0xE9	/* Get scaling factor */
+#define AUX_SET_STREAM		0xEA	/* Set stream mode */
+#define AUX_POLL		0xEB	/* Poll */
+#define AUX_RESET_WRAP		0xEC	/* Reset wrap mode */
+#define AUX_SET_WRAP		0xEE	/* Set wrap mode */
+#define AUX_SET_REMOTE		0xF0	/* Set remote mode */
+#define AUX_GET_TYPE		0xF2	/* Get type */
+#define AUX_SET_SAMPLE		0xF3	/* Set sample rate */
+#define AUX_ENABLE_DEV		0xF4	/* Enable aux device */
+#define AUX_DISABLE_DEV		0xF5	/* Disable aux device */
+#define AUX_SET_DEFAULT		0xF6
+#define AUX_RESET		0xFF	/* Reset aux device */
+#define AUX_ACK			0xFA	/* Command byte ACK. */
+
+#define MOUSE_STATUS_REMOTE     0x40
+#define MOUSE_STATUS_ENABLED    0x20
+#define MOUSE_STATUS_SCALE21    0x10
+
+#define KBD_PENDING_KBD         1
+#define KBD_PENDING_AUX         2
+
+typedef struct KBDState {
+    uint8_t write_cmd; /* if non zero, write data to port 60 is expected */
+    uint8_t status;
+    uint8_t mode;
+    uint8_t outport;
+    /* Bitmask of devices with data available.  */
+    uint8_t pending;
+    void *kbd;
+    void *mouse;
+
+    qemu_irq irq_kbd;
+    qemu_irq irq_mouse;
+    qemu_irq *a20_out;
+    hwaddr mask;
+} KBDState;
+
+/* update irq and KBD_STAT_[MOUSE_]OBF */
+/* XXX: not generating the irqs if KBD_MODE_DISABLE_KBD is set may be
+   incorrect, but it avoids having to simulate exact delays */
+static void kbd_update_irq(KBDState *s)
+{
+    int irq_kbd_level, irq_mouse_level;
+
+    irq_kbd_level = 0;
+    irq_mouse_level = 0;
+    s->status &= ~(KBD_STAT_OBF | KBD_STAT_MOUSE_OBF);
+    s->outport &= ~(KBD_OUT_OBF | KBD_OUT_MOUSE_OBF);
+    if (s->pending) {
+        s->status |= KBD_STAT_OBF;
+        s->outport |= KBD_OUT_OBF;
+        /* kbd data takes priority over aux data.  */
+        if (s->pending == KBD_PENDING_AUX) {
+            s->status |= KBD_STAT_MOUSE_OBF;
+            s->outport |= KBD_OUT_MOUSE_OBF;
+            if (s->mode & KBD_MODE_MOUSE_INT)
+                irq_mouse_level = 1;
+        } else {
+            if ((s->mode & KBD_MODE_KBD_INT) &&
+                !(s->mode & KBD_MODE_DISABLE_KBD))
+                irq_kbd_level = 1;
+        }
+    }
+    qemu_set_irq(s->irq_kbd, irq_kbd_level);
+    qemu_set_irq(s->irq_mouse, irq_mouse_level);
+}
+
+static void kbd_update_kbd_irq(void *opaque, int level)
+{
+    KBDState *s = (KBDState *)opaque;
+
+    if (level)
+        s->pending |= KBD_PENDING_KBD;
+    else
+        s->pending &= ~KBD_PENDING_KBD;
+    kbd_update_irq(s);
+}
+
+static void kbd_update_aux_irq(void *opaque, int level)
+{
+    KBDState *s = (KBDState *)opaque;
+
+    if (level)
+        s->pending |= KBD_PENDING_AUX;
+    else
+        s->pending &= ~KBD_PENDING_AUX;
+    kbd_update_irq(s);
+}
+
+static uint64_t kbd_read_status(void *opaque, hwaddr addr,
+                                unsigned size)
+{
+    KBDState *s = opaque;
+    int val;
+    val = s->status;
+    DPRINTF("kbd: read status=0x%02x\n", val);
+    return val;
+}
+
+static void kbd_queue(KBDState *s, int b, int aux)
+{
+    if (aux)
+        ps2_queue(s->mouse, b);
+    else
+        ps2_queue(s->kbd, b);
+}
+
+static void outport_write(KBDState *s, uint32_t val)
+{
+    DPRINTF("kbd: write outport=0x%02x\n", val);
+    s->outport = val;
+    if (s->a20_out) {
+        qemu_set_irq(*s->a20_out, (val >> 1) & 1);
+    }
+    if (!(val & 1)) {
+        qemu_system_reset_request();
+    }
+}
+
+static void kbd_write_command(void *opaque, hwaddr addr,
+                              uint64_t val, unsigned size)
+{
+    KBDState *s = opaque;
+
+    DPRINTF("kbd: write cmd=0x%02x\n", val);
+
+    /* Bits 3-0 of the output port P2 of the keyboard controller may be pulsed
+     * low for approximately 6 micro seconds. Bits 3-0 of the KBD_CCMD_PULSE
+     * command specify the output port bits to be pulsed.
+     * 0: Bit should be pulsed. 1: Bit should not be modified.
+     * The only useful version of this command is pulsing bit 0,
+     * which does a CPU reset.
+     */
+    if((val & KBD_CCMD_PULSE_BITS_3_0) == KBD_CCMD_PULSE_BITS_3_0) {
+        if(!(val & 1))
+            val = KBD_CCMD_RESET;
+        else
+            val = KBD_CCMD_NO_OP;
+    }
+
+    switch(val) {
+    case KBD_CCMD_READ_MODE:
+        kbd_queue(s, s->mode, 0);
+        break;
+    case KBD_CCMD_WRITE_MODE:
+    case KBD_CCMD_WRITE_OBUF:
+    case KBD_CCMD_WRITE_AUX_OBUF:
+    case KBD_CCMD_WRITE_MOUSE:
+    case KBD_CCMD_WRITE_OUTPORT:
+        s->write_cmd = val;
+        break;
+    case KBD_CCMD_MOUSE_DISABLE:
+        s->mode |= KBD_MODE_DISABLE_MOUSE;
+        break;
+    case KBD_CCMD_MOUSE_ENABLE:
+        s->mode &= ~KBD_MODE_DISABLE_MOUSE;
+        break;
+    case KBD_CCMD_TEST_MOUSE:
+        kbd_queue(s, 0x00, 0);
+        break;
+    case KBD_CCMD_SELF_TEST:
+        s->status |= KBD_STAT_SELFTEST;
+        kbd_queue(s, 0x55, 0);
+        break;
+    case KBD_CCMD_KBD_TEST:
+        kbd_queue(s, 0x00, 0);
+        break;
+    case KBD_CCMD_KBD_DISABLE:
+        s->mode |= KBD_MODE_DISABLE_KBD;
+        kbd_update_irq(s);
+        break;
+    case KBD_CCMD_KBD_ENABLE:
+        s->mode &= ~KBD_MODE_DISABLE_KBD;
+        kbd_update_irq(s);
+        break;
+    case KBD_CCMD_READ_INPORT:
+        kbd_queue(s, 0x00, 0);
+        break;
+    case KBD_CCMD_READ_OUTPORT:
+        kbd_queue(s, s->outport, 0);
+        break;
+    case KBD_CCMD_ENABLE_A20:
+        if (s->a20_out) {
+            qemu_irq_raise(*s->a20_out);
+        }
+        s->outport |= KBD_OUT_A20;
+        break;
+    case KBD_CCMD_DISABLE_A20:
+        if (s->a20_out) {
+            qemu_irq_lower(*s->a20_out);
+        }
+        s->outport &= ~KBD_OUT_A20;
+        break;
+    case KBD_CCMD_RESET:
+        qemu_system_reset_request();
+        break;
+    case KBD_CCMD_NO_OP:
+        /* ignore that */
+        break;
+    default:
+        fprintf(stderr, "qemu: unsupported keyboard cmd=0x%02x\n", (int)val);
+        break;
+    }
+}
+
+static uint64_t kbd_read_data(void *opaque, hwaddr addr,
+                              unsigned size)
+{
+    KBDState *s = opaque;
+    uint32_t val;
+
+    if (s->pending == KBD_PENDING_AUX)
+        val = ps2_read_data(s->mouse);
+    else
+        val = ps2_read_data(s->kbd);
+
+    DPRINTF("kbd: read data=0x%02x\n", val);
+    return val;
+}
+
+static void kbd_write_data(void *opaque, hwaddr addr,
+                           uint64_t val, unsigned size)
+{
+    KBDState *s = opaque;
+
+    DPRINTF("kbd: write data=0x%02x\n", val);
+
+    switch(s->write_cmd) {
+    case 0:
+        ps2_write_keyboard(s->kbd, val);
+        break;
+    case KBD_CCMD_WRITE_MODE:
+        s->mode = val;
+        ps2_keyboard_set_translation(s->kbd, (s->mode & KBD_MODE_KCC) != 0);
+        /* ??? */
+        kbd_update_irq(s);
+        break;
+    case KBD_CCMD_WRITE_OBUF:
+        kbd_queue(s, val, 0);
+        break;
+    case KBD_CCMD_WRITE_AUX_OBUF:
+        kbd_queue(s, val, 1);
+        break;
+    case KBD_CCMD_WRITE_OUTPORT:
+        outport_write(s, val);
+        break;
+    case KBD_CCMD_WRITE_MOUSE:
+        ps2_write_mouse(s->mouse, val);
+        break;
+    default:
+        break;
+    }
+    s->write_cmd = 0;
+}
+
+static void kbd_reset(void *opaque)
+{
+    KBDState *s = opaque;
+
+    s->mode = KBD_MODE_KBD_INT | KBD_MODE_MOUSE_INT;
+    s->status = KBD_STAT_CMD | KBD_STAT_UNLOCKED;
+    s->outport = KBD_OUT_RESET | KBD_OUT_A20;
+}
+
+static const VMStateDescription vmstate_kbd = {
+    .name = "pckbd",
+    .version_id = 3,
+    .minimum_version_id = 3,
+    .minimum_version_id_old = 3,
+    .fields      = (VMStateField []) {
+        VMSTATE_UINT8(write_cmd, KBDState),
+        VMSTATE_UINT8(status, KBDState),
+        VMSTATE_UINT8(mode, KBDState),
+        VMSTATE_UINT8(pending, KBDState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+/* Memory mapped interface */
+static uint32_t kbd_mm_readb (void *opaque, hwaddr addr)
+{
+    KBDState *s = opaque;
+
+    if (addr & s->mask)
+        return kbd_read_status(s, 0, 1) & 0xff;
+    else
+        return kbd_read_data(s, 0, 1) & 0xff;
+}
+
+static void kbd_mm_writeb (void *opaque, hwaddr addr, uint32_t value)
+{
+    KBDState *s = opaque;
+
+    if (addr & s->mask)
+        kbd_write_command(s, 0, value & 0xff, 1);
+    else
+        kbd_write_data(s, 0, value & 0xff, 1);
+}
+
+static const MemoryRegionOps i8042_mmio_ops = {
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .old_mmio = {
+        .read = { kbd_mm_readb, kbd_mm_readb, kbd_mm_readb },
+        .write = { kbd_mm_writeb, kbd_mm_writeb, kbd_mm_writeb },
+    },
+};
+
+void i8042_mm_init(qemu_irq kbd_irq, qemu_irq mouse_irq,
+                   MemoryRegion *region, ram_addr_t size,
+                   hwaddr mask)
+{
+    KBDState *s = g_malloc0(sizeof(KBDState));
+
+    s->irq_kbd = kbd_irq;
+    s->irq_mouse = mouse_irq;
+    s->mask = mask;
+
+    vmstate_register(NULL, 0, &vmstate_kbd, s);
+
+    memory_region_init_io(region, &i8042_mmio_ops, s, "i8042", size);
+
+    s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s);
+    s->mouse = ps2_mouse_init(kbd_update_aux_irq, s);
+    qemu_register_reset(kbd_reset, s);
+}
+
+typedef struct ISAKBDState {
+    ISADevice dev;
+    KBDState kbd;
+    MemoryRegion io[2];
+} ISAKBDState;
+
+void i8042_isa_mouse_fake_event(void *opaque)
+{
+    ISADevice *dev = opaque;
+    KBDState *s = &(DO_UPCAST(ISAKBDState, dev, dev)->kbd);
+
+    ps2_mouse_fake_event(s->mouse);
+}
+
+void i8042_setup_a20_line(ISADevice *dev, qemu_irq *a20_out)
+{
+    KBDState *s = &(DO_UPCAST(ISAKBDState, dev, dev)->kbd);
+
+    s->a20_out = a20_out;
+}
+
+static const VMStateDescription vmstate_kbd_isa = {
+    .name = "pckbd",
+    .version_id = 3,
+    .minimum_version_id = 3,
+    .minimum_version_id_old = 3,
+    .fields      = (VMStateField []) {
+        VMSTATE_STRUCT(kbd, ISAKBDState, 0, vmstate_kbd, KBDState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static const MemoryRegionOps i8042_data_ops = {
+    .read = kbd_read_data,
+    .write = kbd_write_data,
+    .impl = {
+        .min_access_size = 1,
+        .max_access_size = 1,
+    },
+    .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static const MemoryRegionOps i8042_cmd_ops = {
+    .read = kbd_read_status,
+    .write = kbd_write_command,
+    .impl = {
+        .min_access_size = 1,
+        .max_access_size = 1,
+    },
+    .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static int i8042_initfn(ISADevice *dev)
+{
+    ISAKBDState *isa_s = DO_UPCAST(ISAKBDState, dev, dev);
+    KBDState *s = &isa_s->kbd;
+
+    isa_init_irq(dev, &s->irq_kbd, 1);
+    isa_init_irq(dev, &s->irq_mouse, 12);
+
+    memory_region_init_io(isa_s->io + 0, &i8042_data_ops, s, "i8042-data", 1);
+    isa_register_ioport(dev, isa_s->io + 0, 0x60);
+
+    memory_region_init_io(isa_s->io + 1, &i8042_cmd_ops, s, "i8042-cmd", 1);
+    isa_register_ioport(dev, isa_s->io + 1, 0x64);
+
+    s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s);
+    s->mouse = ps2_mouse_init(kbd_update_aux_irq, s);
+    qemu_register_reset(kbd_reset, s);
+    return 0;
+}
+
+static void i8042_class_initfn(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    ISADeviceClass *ic = ISA_DEVICE_CLASS(klass);
+    ic->init = i8042_initfn;
+    dc->no_user = 1;
+    dc->vmsd = &vmstate_kbd_isa;
+}
+
+static const TypeInfo i8042_info = {
+    .name          = "i8042",
+    .parent        = TYPE_ISA_DEVICE,
+    .instance_size = sizeof(ISAKBDState),
+    .class_init    = i8042_class_initfn,
+};
+
+static void i8042_register_types(void)
+{
+    type_register_static(&i8042_info);
+}
+
+type_init(i8042_register_types)