hw: move target-independent files to subdirectories

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 322 insertions, 0 deletions

diff --git a/hw/display/ssd0303.c b/hw/display/ssd0303.c
new file mode 100644
index 0000000000..183a87835c
--- /dev/null
+++ b/hw/display/ssd0303.c
@@ -0,0 +1,322 @@
+/*
+ * SSD0303 OLED controller with OSRAM Pictiva 96x16 display.
+ *
+ * Copyright (c) 2006-2007 CodeSourcery.
+ * Written by Paul Brook
+ *
+ * This code is licensed under the GPL.
+ */
+
+/* The controller can support a variety of different displays, but we only
+   implement one.  Most of the commends relating to brightness and geometry
+   setup are ignored. */
+#include "hw/i2c/i2c.h"
+#include "ui/console.h"
+
+//#define DEBUG_SSD0303 1
+
+#ifdef DEBUG_SSD0303
+#define DPRINTF(fmt, ...) \
+do { printf("ssd0303: " fmt , ## __VA_ARGS__); } while (0)
+#define BADF(fmt, ...) \
+do { fprintf(stderr, "ssd0303: error: " fmt , ## __VA_ARGS__); exit(1);} while (0)
+#else
+#define DPRINTF(fmt, ...) do {} while(0)
+#define BADF(fmt, ...) \
+do { fprintf(stderr, "ssd0303: error: " fmt , ## __VA_ARGS__);} while (0)
+#endif
+
+/* Scaling factor for pixels.  */
+#define MAGNIFY 4
+
+enum ssd0303_mode
+{
+    SSD0303_IDLE,
+    SSD0303_DATA,
+    SSD0303_CMD
+};
+
+enum ssd0303_cmd {
+    SSD0303_CMD_NONE,
+    SSD0303_CMD_SKIP1
+};
+
+typedef struct {
+    I2CSlave i2c;
+    QemuConsole *con;
+    int row;
+    int col;
+    int start_line;
+    int mirror;
+    int flash;
+    int enabled;
+    int inverse;
+    int redraw;
+    enum ssd0303_mode mode;
+    enum ssd0303_cmd cmd_state;
+    uint8_t framebuffer[132*8];
+} ssd0303_state;
+
+static int ssd0303_recv(I2CSlave *i2c)
+{
+    BADF("Reads not implemented\n");
+    return -1;
+}
+
+static int ssd0303_send(I2CSlave *i2c, uint8_t data)
+{
+    ssd0303_state *s = (ssd0303_state *)i2c;
+    enum ssd0303_cmd old_cmd_state;
+    switch (s->mode) {
+    case SSD0303_IDLE:
+        DPRINTF("byte 0x%02x\n", data);
+        if (data == 0x80)
+            s->mode = SSD0303_CMD;
+        else if (data == 0x40)
+            s->mode = SSD0303_DATA;
+        else
+            BADF("Unexpected byte 0x%x\n", data);
+        break;
+    case SSD0303_DATA:
+        DPRINTF("data 0x%02x\n", data);
+        if (s->col < 132) {
+            s->framebuffer[s->col + s->row * 132] = data;
+            s->col++;
+            s->redraw = 1;
+        }
+        break;
+    case SSD0303_CMD:
+        old_cmd_state = s->cmd_state;
+        s->cmd_state = SSD0303_CMD_NONE;
+        switch (old_cmd_state) {
+        case SSD0303_CMD_NONE:
+            DPRINTF("cmd 0x%02x\n", data);
+            s->mode = SSD0303_IDLE;
+            switch (data) {
+            case 0x00 ... 0x0f: /* Set lower column address.  */
+                s->col = (s->col & 0xf0) | (data & 0xf);
+                break;
+            case 0x10 ... 0x20: /* Set higher column address.  */
+                s->col = (s->col & 0x0f) | ((data & 0xf) << 4);
+                break;
+            case 0x40 ... 0x7f: /* Set start line.  */
+                s->start_line = 0;
+                break;
+            case 0x81: /* Set contrast (Ignored).  */
+                s->cmd_state = SSD0303_CMD_SKIP1;
+                break;
+            case 0xa0: /* Mirror off.  */
+                s->mirror = 0;
+                break;
+            case 0xa1: /* Mirror off.  */
+                s->mirror = 1;
+                break;
+            case 0xa4: /* Entire display off.  */
+                s->flash = 0;
+                break;
+            case 0xa5: /* Entire display on.  */
+                s->flash = 1;
+                break;
+            case 0xa6: /* Inverse off.  */
+                s->inverse = 0;
+                break;
+            case 0xa7: /* Inverse on.  */
+                s->inverse = 1;
+                break;
+            case 0xa8: /* Set multiplied ratio (Ignored).  */
+                s->cmd_state = SSD0303_CMD_SKIP1;
+                break;
+            case 0xad: /* DC-DC power control.  */
+                s->cmd_state = SSD0303_CMD_SKIP1;
+                break;
+            case 0xae: /* Display off.  */
+                s->enabled = 0;
+                break;
+            case 0xaf: /* Display on.  */
+                s->enabled = 1;
+                break;
+            case 0xb0 ... 0xbf: /* Set Page address.  */
+                s->row = data & 7;
+                break;
+            case 0xc0 ... 0xc8: /* Set COM output direction (Ignored).  */
+                break;
+            case 0xd3: /* Set display offset (Ignored).  */
+                s->cmd_state = SSD0303_CMD_SKIP1;
+                break;
+            case 0xd5: /* Set display clock (Ignored).  */
+                s->cmd_state = SSD0303_CMD_SKIP1;
+                break;
+            case 0xd8: /* Set color and power mode (Ignored).  */
+                s->cmd_state = SSD0303_CMD_SKIP1;
+                break;
+            case 0xd9: /* Set pre-charge period (Ignored).  */
+                s->cmd_state = SSD0303_CMD_SKIP1;
+                break;
+            case 0xda: /* Set COM pin configuration (Ignored).  */
+                s->cmd_state = SSD0303_CMD_SKIP1;
+                break;
+            case 0xdb: /* Set VCOM dselect level (Ignored).  */
+                s->cmd_state = SSD0303_CMD_SKIP1;
+                break;
+            case 0xe3: /* no-op.  */
+                break;
+            default:
+                BADF("Unknown command: 0x%x\n", data);
+            }
+            break;
+        case SSD0303_CMD_SKIP1:
+            DPRINTF("skip 0x%02x\n", data);
+            break;
+        }
+        break;
+    }
+    return 0;
+}
+
+static void ssd0303_event(I2CSlave *i2c, enum i2c_event event)
+{
+    ssd0303_state *s = (ssd0303_state *)i2c;
+    switch (event) {
+    case I2C_FINISH:
+        s->mode = SSD0303_IDLE;
+        break;
+    case I2C_START_RECV:
+    case I2C_START_SEND:
+    case I2C_NACK:
+        /* Nothing to do.  */
+        break;
+    }
+}
+
+static void ssd0303_update_display(void *opaque)
+{
+    ssd0303_state *s = (ssd0303_state *)opaque;
+    DisplaySurface *surface = qemu_console_surface(s->con);
+    uint8_t *dest;
+    uint8_t *src;
+    int x;
+    int y;
+    int line;
+    char *colors[2];
+    char colortab[MAGNIFY * 8];
+    int dest_width;
+    uint8_t mask;
+
+    if (!s->redraw)
+        return;
+
+    switch (surface_bits_per_pixel(surface)) {
+    case 0:
+        return;
+    case 15:
+        dest_width = 2;
+        break;
+    case 16:
+        dest_width = 2;
+        break;
+    case 24:
+        dest_width = 3;
+        break;
+    case 32:
+        dest_width = 4;
+        break;
+    default:
+        BADF("Bad color depth\n");
+        return;
+    }
+    dest_width *= MAGNIFY;
+    memset(colortab, 0xff, dest_width);
+    memset(colortab + dest_width, 0, dest_width);
+    if (s->flash) {
+        colors[0] = colortab;
+        colors[1] = colortab;
+    } else if (s->inverse) {
+        colors[0] = colortab;
+        colors[1] = colortab + dest_width;
+    } else {
+        colors[0] = colortab + dest_width;
+        colors[1] = colortab;
+    }
+    dest = surface_data(surface);
+    for (y = 0; y < 16; y++) {
+        line = (y + s->start_line) & 63;
+        src = s->framebuffer + 132 * (line >> 3) + 36;
+        mask = 1 << (line & 7);
+        for (x = 0; x < 96; x++) {
+            memcpy(dest, colors[(*src & mask) != 0], dest_width);
+            dest += dest_width;
+            src++;
+        }
+        for (x = 1; x < MAGNIFY; x++) {
+            memcpy(dest, dest - dest_width * 96, dest_width * 96);
+            dest += dest_width * 96;
+        }
+    }
+    s->redraw = 0;
+    dpy_gfx_update(s->con, 0, 0, 96 * MAGNIFY, 16 * MAGNIFY);
+}
+
+static void ssd0303_invalidate_display(void * opaque)
+{
+    ssd0303_state *s = (ssd0303_state *)opaque;
+    s->redraw = 1;
+}
+
+static const VMStateDescription vmstate_ssd0303 = {
+    .name = "ssd0303_oled",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .minimum_version_id_old = 1,
+    .fields      = (VMStateField []) {
+        VMSTATE_INT32(row, ssd0303_state),
+        VMSTATE_INT32(col, ssd0303_state),
+        VMSTATE_INT32(start_line, ssd0303_state),
+        VMSTATE_INT32(mirror, ssd0303_state),
+        VMSTATE_INT32(flash, ssd0303_state),
+        VMSTATE_INT32(enabled, ssd0303_state),
+        VMSTATE_INT32(inverse, ssd0303_state),
+        VMSTATE_INT32(redraw, ssd0303_state),
+        VMSTATE_UINT32(mode, ssd0303_state),
+        VMSTATE_UINT32(cmd_state, ssd0303_state),
+        VMSTATE_BUFFER(framebuffer, ssd0303_state),
+        VMSTATE_I2C_SLAVE(i2c, ssd0303_state),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static int ssd0303_init(I2CSlave *i2c)
+{
+    ssd0303_state *s = FROM_I2C_SLAVE(ssd0303_state, i2c);
+
+    s->con = graphic_console_init(ssd0303_update_display,
+                                  ssd0303_invalidate_display,
+                                  NULL, NULL, s);
+    qemu_console_resize(s->con, 96 * MAGNIFY, 16 * MAGNIFY);
+    return 0;
+}
+
+static void ssd0303_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
+
+    k->init = ssd0303_init;
+    k->event = ssd0303_event;
+    k->recv = ssd0303_recv;
+    k->send = ssd0303_send;
+    dc->vmsd = &vmstate_ssd0303;
+}
+
+static const TypeInfo ssd0303_info = {
+    .name          = "ssd0303",
+    .parent        = TYPE_I2C_SLAVE,
+    .instance_size = sizeof(ssd0303_state),
+    .class_init    = ssd0303_class_init,
+};
+
+static void ssd0303_register_types(void)
+{
+    type_register_static(&ssd0303_info);
+}
+
+type_init(ssd0303_register_types)