hw/cxl/device: Implement the CAP array (8.2.8.1-2)

This implements all device MMIO up to the first capability. That
includes the CXL Device Capabilities Array Register, as well as all of
the CXL Device Capability Header Registers. The latter are filled in as
they are implemented in the following patches.

Endianness and alignment are managed by softmmu memory core.

Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

2 files changed, 110 insertions, 0 deletions

diff --git a/hw/cxl/cxl-device-utils.c b/hw/cxl/cxl-device-utils.c
new file mode 100644
index 0000000000..241f9f82e3
--- /dev/null
+++ b/hw/cxl/cxl-device-utils.c
@@ -0,0 +1,109 @@
+/*
+ * CXL Utility library for devices
+ *
+ * Copyright(C) 2020 Intel Corporation.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See the
+ * COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/cxl/cxl.h"
+
+/*
+ * Device registers have no restrictions per the spec, and so fall back to the
+ * default memory mapped register rules in 8.2:
+ *   Software shall use CXL.io Memory Read and Write to access memory mapped
+ *   register defined in this section. Unless otherwise specified, software
+ *   shall restrict the accesses width based on the following:
+ *   • A 32 bit register shall be accessed as a 1 Byte, 2 Bytes or 4 Bytes
+ *     quantity.
+ *   • A 64 bit register shall be accessed as a 1 Byte, 2 Bytes, 4 Bytes or 8
+ *     Bytes
+ *   • The address shall be a multiple of the access width, e.g. when
+ *     accessing a register as a 4 Byte quantity, the address shall be
+ *     multiple of 4.
+ *   • The accesses shall map to contiguous bytes.If these rules are not
+ *     followed, the behavior is undefined
+ */
+
+static uint64_t caps_reg_read(void *opaque, hwaddr offset, unsigned size)
+{
+    CXLDeviceState *cxl_dstate = opaque;
+
+    if (size == 4) {
+        return cxl_dstate->caps_reg_state32[offset / sizeof(*cxl_dstate->caps_reg_state32)];
+    } else {
+        return cxl_dstate->caps_reg_state64[offset / sizeof(*cxl_dstate->caps_reg_state64)];
+    }
+}
+
+static uint64_t dev_reg_read(void *opaque, hwaddr offset, unsigned size)
+{
+    return 0;
+}
+
+static const MemoryRegionOps dev_ops = {
+    .read = dev_reg_read,
+    .write = NULL, /* status register is read only */
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 1,
+        .max_access_size = 8,
+        .unaligned = false,
+    },
+    .impl = {
+        .min_access_size = 1,
+        .max_access_size = 8,
+    },
+};
+
+static const MemoryRegionOps caps_ops = {
+    .read = caps_reg_read,
+    .write = NULL, /* caps registers are read only */
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 1,
+        .max_access_size = 8,
+        .unaligned = false,
+    },
+    .impl = {
+        .min_access_size = 4,
+        .max_access_size = 8,
+    },
+};
+
+void cxl_device_register_block_init(Object *obj, CXLDeviceState *cxl_dstate)
+{
+    /* This will be a BAR, so needs to be rounded up to pow2 for PCI spec */
+    memory_region_init(&cxl_dstate->device_registers, obj, "device-registers",
+                       pow2ceil(CXL_MMIO_SIZE));
+
+    memory_region_init_io(&cxl_dstate->caps, obj, &caps_ops, cxl_dstate,
+                          "cap-array", CXL_CAPS_SIZE);
+    memory_region_init_io(&cxl_dstate->device, obj, &dev_ops, cxl_dstate,
+                          "device-status", CXL_DEVICE_STATUS_REGISTERS_LENGTH);
+
+    memory_region_add_subregion(&cxl_dstate->device_registers, 0,
+                                &cxl_dstate->caps);
+    memory_region_add_subregion(&cxl_dstate->device_registers,
+                                CXL_DEVICE_STATUS_REGISTERS_OFFSET,
+                                &cxl_dstate->device);
+}
+
+static void device_reg_init_common(CXLDeviceState *cxl_dstate) { }
+
+void cxl_device_register_init_common(CXLDeviceState *cxl_dstate)
+{
+    uint64_t *cap_hdrs = cxl_dstate->caps_reg_state64;
+    const int cap_count = 1;
+
+    /* CXL Device Capabilities Array Register */
+    ARRAY_FIELD_DP64(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_ID, 0);
+    ARRAY_FIELD_DP64(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_VERSION, 1);
+    ARRAY_FIELD_DP64(cap_hdrs, CXL_DEV_CAP_ARRAY, CAP_COUNT, cap_count);
+
+    cxl_device_cap_init(cxl_dstate, DEVICE_STATUS, 1);
+    device_reg_init_common(cxl_dstate);
+}
diff --git a/hw/cxl/meson.build b/hw/cxl/meson.build
index 3231b5de1e..dd7c6f8e5a 100644
--- a/hw/cxl/meson.build
+++ b/hw/cxl/meson.build
@@ -1,4 +1,5 @@
 softmmu_ss.add(when: 'CONFIG_CXL',
                if_true: files(
                    'cxl-component-utils.c',
+                   'cxl-device-utils.c',
                ))