i.MX: Split UART emulator in a header file and a source file

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a51ef50fa222a614169056d5389a6d3ed6a63b04.1437080501.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 2 insertions, 80 deletions

diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c
index f3fbc776be..1dcb3254f8 100644
--- a/hw/char/imx_serial.c
+++ b/hw/char/imx_serial.c
@@ -4,6 +4,7 @@
  * Copyright (c) 2008 OKL
  * Originally Written by Hans Jiang
  * Copyright (c) 2011 NICTA Pty Ltd.
+ * Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
  *
  * This work is licensed under the terms of the GNU GPL, version 2 or later.
  * See the COPYING file in the top-level directory.
@@ -17,8 +18,7 @@
  *     is a real serial device.
  */
 
-#include "hw/hw.h"
-#include "hw/sysbus.h"
+#include "hw/char/imx_serial.h"
 #include "sysemu/sysemu.h"
 #include "sysemu/char.h"
 #include "hw/arm/imx.h"
@@ -43,35 +43,6 @@ do { printf("imx_serial: " fmt , ##args); } while (0)
 #  define IPRINTF(fmt, args...) do {} while (0)
 #endif
 
-#define TYPE_IMX_SERIAL "imx-serial"
-#define IMX_SERIAL(obj) OBJECT_CHECK(IMXSerialState, (obj), TYPE_IMX_SERIAL)
-
-typedef struct IMXSerialState {
-    SysBusDevice parent_obj;
-
-    MemoryRegion iomem;
-    int32_t readbuff;
-
-    uint32_t usr1;
-    uint32_t usr2;
-    uint32_t ucr1;
-    uint32_t ucr2;
-    uint32_t uts1;
-
-    /*
-     * The registers below are implemented just so that the
-     * guest OS sees what it has written
-     */
-    uint32_t onems;
-    uint32_t ufcr;
-    uint32_t ubmr;
-    uint32_t ubrc;
-    uint32_t ucr3;
-
-    qemu_irq irq;
-    CharDriverState *chr;
-} IMXSerialState;
-
 static const VMStateDescription vmstate_imx_serial = {
     .name = "imx-serial",
     .version_id = 1,
@@ -91,55 +62,6 @@ static const VMStateDescription vmstate_imx_serial = {
     },
 };
 
-
-#define URXD_CHARRDY    (1<<15)   /* character read is valid */
-#define URXD_ERR        (1<<14)   /* Character has error */
-#define URXD_BRK        (1<<11)   /* Break received */
-
-#define USR1_PARTYER    (1<<15)   /* Parity Error */
-#define USR1_RTSS       (1<<14)   /* RTS pin status */
-#define USR1_TRDY       (1<<13)   /* Tx ready */
-#define USR1_RTSD       (1<<12)   /* RTS delta: pin changed state */
-#define USR1_ESCF       (1<<11)   /* Escape sequence interrupt */
-#define USR1_FRAMERR    (1<<10)   /* Framing error  */
-#define USR1_RRDY       (1<<9)    /* receiver ready */
-#define USR1_AGTIM      (1<<8)    /* Aging timer interrupt */
-#define USR1_DTRD       (1<<7)    /* DTR changed */
-#define USR1_RXDS       (1<<6)    /* Receiver is idle */
-#define USR1_AIRINT     (1<<5)    /* Aysnch IR interrupt */
-#define USR1_AWAKE      (1<<4)    /* Falling edge detected on RXd pin */
-
-#define USR2_ADET       (1<<15)   /* Autobaud complete */
-#define USR2_TXFE       (1<<14)   /* Transmit FIFO empty */
-#define USR2_DTRF       (1<<13)   /* DTR/DSR transition */
-#define USR2_IDLE       (1<<12)   /* UART has been idle for too long */
-#define USR2_ACST       (1<<11)   /* Autobaud counter stopped */
-#define USR2_RIDELT     (1<<10)   /* Ring Indicator delta */
-#define USR2_RIIN       (1<<9)    /* Ring Indicator Input */
-#define USR2_IRINT      (1<<8)    /* Serial Infrared Interrupt */
-#define USR2_WAKE       (1<<7)    /* Start bit detected */
-#define USR2_DCDDELT    (1<<6)    /* Data Carrier Detect delta */
-#define USR2_DCDIN      (1<<5)    /* Data Carrier Detect Input */
-#define USR2_RTSF       (1<<4)    /* RTS transition */
-#define USR2_TXDC       (1<<3)    /* Transmission complete */
-#define USR2_BRCD       (1<<2)    /* Break condition detected */
-#define USR2_ORE        (1<<1)    /* Overrun error */
-#define USR2_RDR        (1<<0)    /* Receive data ready */
-
-#define UCR1_TRDYEN     (1<<13)   /* Tx Ready Interrupt Enable */
-#define UCR1_RRDYEN     (1<<9)    /* Rx Ready Interrupt Enable */
-#define UCR1_TXMPTYEN   (1<<6)    /* Tx Empty Interrupt Enable */
-#define UCR1_UARTEN     (1<<0)    /* UART Enable */
-
-#define UCR2_TXEN       (1<<2)    /* Transmitter enable */
-#define UCR2_RXEN       (1<<1)    /* Receiver enable */
-#define UCR2_SRST       (1<<0)    /* Reset complete */
-
-#define UTS1_TXEMPTY    (1<<6)
-#define UTS1_RXEMPTY    (1<<5)
-#define UTS1_TXFULL     (1<<4)
-#define UTS1_RXFULL     (1<<3)
-
 static void imx_update(IMXSerialState *s)
 {
     uint32_t flags;