scsi: build qemu-pr-helper

Introduce a privileged helper to run persistent reservation commands.
This lets virtual machines send persistent reservations without using
CAP_SYS_RAWIO or out-of-tree patches.  The helper uses Unix permissions
and SCM_RIGHTS to restrict access to processes that can access its socket
and prove that they have an open file descriptor for a raw SCSI device.

The next patch will also correct the usage of persistent reservations
with multipath devices.

It would also be possible to support for Linux's IOC_PR_* ioctls in
the future, to support NVMe devices.  For now, however, only SCSI is
supported.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 83 insertions, 0 deletions

diff --git a/docs/interop/pr-helper.rst b/docs/interop/pr-helper.rst
new file mode 100644
index 0000000000..9f76d5bcf9
--- /dev/null
+++ b/docs/interop/pr-helper.rst
@@ -0,0 +1,83 @@
+..
+
+======================================
+Persistent reservation helper protocol
+======================================
+
+QEMU's SCSI passthrough devices, ``scsi-block`` and ``scsi-generic``,
+can delegate implementation of persistent reservations to an external
+(and typically privileged) program.  Persistent Reservations allow
+restricting access to block devices to specific initiators in a shared
+storage setup.
+
+For a more detailed reference please refer the the SCSI Primary
+Commands standard, specifically the section on Reservations and the
+"PERSISTENT RESERVE IN" and "PERSISTENT RESERVE OUT" commands.
+
+This document describes the socket protocol used between QEMU's
+``pr-manager-helper`` object and the external program.
+
+.. contents::
+
+Connection and initialization
+-----------------------------
+
+All data transmitted on the socket is big-endian.
+
+After connecting to the helper program's socket, the helper starts a simple
+feature negotiation process by writing four bytes corresponding to
+the features it exposes (``supported_features``).  QEMU reads it,
+then writes four bytes corresponding to the desired features of the
+helper program (``requested_features``).
+
+If a bit is 1 in ``requested_features`` and 0 in ``supported_features``,
+the corresponding feature is not supported by the helper and the connection
+is closed.  On the other hand, it is acceptable for a bit to be 0 in
+``requested_features`` and 1 in ``supported_features``; in this case,
+the helper will not enable the feature.
+
+Right now no feature is defined, so the two parties always write four
+zero bytes.
+
+Command format
+--------------
+
+It is invalid to send multiple commands concurrently on the same
+socket.  It is however possible to connect multiple sockets to the
+helper and send multiple commands to the helper for one or more
+file descriptors.
+
+A command consists of a request and a response.  A request consists
+of a 16-byte SCSI CDB.  A file descriptor must be passed to the helper
+together with the SCSI CDB using ancillary data.
+
+The CDB has the following limitations:
+
+- the command (stored in the first byte) must be one of 0x5E
+  (PERSISTENT RESERVE IN) or 0x5F (PERSISTENT RESERVE OUT).
+
+- the allocation length (stored in bytes 7-8 of the CDB for PERSISTENT
+  RESERVE IN) or parameter list length (stored in bytes 5-8 of the CDB
+  for PERSISTENT RESERVE OUT) is limited to 8 KiB.
+
+For PERSISTENT RESERVE OUT, the parameter list is sent right after the
+CDB.  The length of the parameter list is taken from the CDB itself.
+
+The helper's reply has the following structure:
+
+- 4 bytes for the SCSI status
+
+- 4 bytes for the payload size (nonzero only for PERSISTENT RESERVE IN
+  and only if the SCSI status is 0x00, i.e. GOOD)
+
+- 96 bytes for the SCSI sense data
+
+- if the size is nonzero, the payload follows
+
+The sense data is always sent to keep the protocol simple, even though
+it is only valid if the SCSI status is CHECK CONDITION (0x02).
+
+The payload size is always less than or equal to the allocation length
+specified in the CDB for the PERSISTENT RESERVE IN command.
+
+If the protocol is violated, the helper closes the socket.