ARM946 CPU support.

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2783 c046a42c-6fe2-441c-8c8c-71466251a162

4 files changed, 221 insertions, 47 deletions

diff --git a/hw/pxa2xx.c b/hw/pxa2xx.c
index 43d40c7fd9..9f4c46c683 100644
--- a/hw/pxa2xx.c
+++ b/hw/pxa2xx.c
@@ -251,7 +251,7 @@ static void pxa2xx_clkpwr_write(void *opaque, int op2, int reg, int crm,
                     ARM_CPU_MODE_SVC | CPSR_A | CPSR_F | CPSR_I;
             s->env->cp15.c1_sys = 0;
             s->env->cp15.c1_coproc = 0;
-            s->env->cp15.c2 = 0;
+            s->env->cp15.c2_base = 0;
             s->env->cp15.c3 = 0;
             s->pm_regs[PSSR >> 2] |= 0x8;	/* Set STS */
             s->pm_regs[RCSR >> 2] |= 0x8;	/* Set GPR */
diff --git a/qemu-doc.texi b/qemu-doc.texi
index b1afb95f62..95e7de2618 100644
--- a/qemu-doc.texi
+++ b/qemu-doc.texi
@@ -77,7 +77,7 @@ For system emulation, the following hardware targets are supported:
 @item Sun4m (32-bit Sparc processor)
 @item Sun4u (64-bit Sparc processor, in progress)
 @item Malta board (32-bit MIPS processor)
-@item ARM Integrator/CP (ARM926E or 1026E processor)
+@item ARM Integrator/CP (ARM926E, 1026E or 946E processor)
 @item ARM Versatile baseboard (ARM926E)
 @item ARM RealView Emulation baseboard (ARM926EJ-S)
 @item Spitz, Akita, Borzoi and Terrier PDAs (PXA270 processor)
@@ -1722,7 +1722,7 @@ devices:
 
 @itemize @minus
 @item
-ARM926E or ARM1026E CPU
+ARM926E, ARM1026E or ARM946E CPU
 @item
 Two PL011 UARTs
 @item 
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 09083b723a..4723807626 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -83,10 +83,14 @@ typedef struct CPUARMState {
         uint32_t c0_cachetype;
         uint32_t c1_sys; /* System control register.  */
         uint32_t c1_coproc; /* Coprocessor access register.  */
-        uint32_t c2; /* MMU translation table base.  */
-        uint32_t c3; /* MMU domain access control register.  */
+        uint32_t c2_base; /* MMU translation table base.  */
+        uint32_t c2_data; /* MPU data cachable bits.  */
+        uint32_t c2_insn; /* MPU instruction cachable bits.  */
+        uint32_t c3; /* MMU domain access control register
+                        MPU write buffer control.  */
         uint32_t c5_insn; /* Fault status registers.  */
         uint32_t c5_data;
+        uint32_t c6_region[8]; /* MPU base/size registers.  */
         uint32_t c6_insn; /* Fault address registers.  */
         uint32_t c6_data;
         uint32_t c9_insn; /* Cache lockdown registers.  */
@@ -241,7 +245,8 @@ enum arm_features {
     ARM_FEATURE_VFP,
     ARM_FEATURE_AUXCR,  /* ARM1026 Auxiliary control register.  */
     ARM_FEATURE_XSCALE, /* Intel XScale extensions.  */
-    ARM_FEATURE_IWMMXT  /* Intel iwMMXt extension.  */
+    ARM_FEATURE_IWMMXT, /* Intel iwMMXt extension.  */
+    ARM_FEATURE_MPU     /* Only has Memory Protection Unit, not full MMU.  */
 };
 
 static inline int arm_feature(CPUARMState *env, int feature)
@@ -258,6 +263,7 @@ void cpu_arm_set_cp_io(CPUARMState *env, int cpnum,
 
 #define ARM_CPUID_ARM1026   0x4106a262
 #define ARM_CPUID_ARM926    0x41069265
+#define ARM_CPUID_ARM946    0x41059461
 #define ARM_CPUID_PXA250    0x69052100
 #define ARM_CPUID_PXA255    0x69052d00
 #define ARM_CPUID_PXA260    0x69052903
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 8526883fb6..e8a2169759 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -19,6 +19,10 @@ static void cpu_reset_model_id(CPUARMState *env, uint32_t id)
         env->vfp.xregs[ARM_VFP_FPSID] = 0x41011090;
         env->cp15.c0_cachetype = 0x1dd20d2;
         break;
+    case ARM_CPUID_ARM946:
+        set_feature(env, ARM_FEATURE_MPU);
+        env->cp15.c0_cachetype = 0x0f004006;
+        break;
     case ARM_CPUID_ARM1026:
         set_feature(env, ARM_FEATURE_VFP);
         set_feature(env, ARM_FEATURE_AUXCR);
@@ -90,6 +94,7 @@ struct arm_cpu_t {
 
 static const struct arm_cpu_t arm_cpu_names[] = {
     { ARM_CPUID_ARM926, "arm926"},
+    { ARM_CPUID_ARM946, "arm946"},
     { ARM_CPUID_ARM1026, "arm1026"},
     { ARM_CPUID_PXA250, "pxa250" },
     { ARM_CPUID_PXA255, "pxa255" },
@@ -392,13 +397,67 @@ static int get_phys_addr(CPUState *env, uint32_t address, int access_type,
         address += env->cp15.c13_fcse;
 
     if ((env->cp15.c1_sys & 1) == 0) {
-        /* MMU diusabled.  */
+        /* MMU/MPU disabled.  */
         *phys_ptr = address;
         *prot = PAGE_READ | PAGE_WRITE;
+    } else if (arm_feature(env, ARM_FEATURE_MPU)) {
+        int n;
+        uint32_t mask;
+        uint32_t base;
+
+        *phys_ptr = address;
+        for (n = 7; n >= 0; n--) {
+            base = env->cp15.c6_region[n];
+            if ((base & 1) == 0)
+                continue;
+            mask = 1 << ((base >> 1) & 0x1f);
+            /* Keep this shift separate from the above to avoid an
+               (undefined) << 32.  */
+            mask = (mask << 1) - 1;
+            if (((base ^ address) & ~mask) == 0)
+                break;
+        }
+        if (n < 0)
+            return 2;
+
+        if (access_type == 2) {
+            mask = env->cp15.c5_insn;
+        } else {
+            mask = env->cp15.c5_data;
+        }
+        mask = (mask >> (n * 4)) & 0xf;
+        switch (mask) {
+        case 0:
+            return 1;
+        case 1:
+            if (is_user)
+              return 1;
+            *prot = PAGE_READ | PAGE_WRITE;
+            break;
+        case 2:
+            *prot = PAGE_READ;
+            if (!is_user)
+                *prot |= PAGE_WRITE;
+            break;
+        case 3:
+            *prot = PAGE_READ | PAGE_WRITE;
+            break;
+        case 5:
+            if (is_user)
+                return 1;
+            *prot = PAGE_READ;
+            break;
+        case 6:
+            *prot = PAGE_READ;
+            break;
+        default:
+            /* Bad permission.  */
+            return 1;
+        }
     } else {
         /* Pagetable walk.  */
         /* Lookup l1 descriptor.  */
-        table = (env->cp15.c2 & 0xffffc000) | ((address >> 18) & 0x3ffc);
+        table = (env->cp15.c2_base & 0xffffc000) | ((address >> 18) & 0x3ffc);
         desc = ldl_phys(table);
         type = (desc & 3);
         domain = (env->cp15.c3 >> ((desc >> 4) & 0x1e)) & 3;
@@ -539,18 +598,50 @@ uint32_t helper_get_cp(CPUState *env, uint32_t insn)
     return 0;
 }
 
+/* Return basic MPU access permission bits.  */
+static uint32_t simple_mpu_ap_bits(uint32_t val)
+{
+    uint32_t ret;
+    uint32_t mask;
+    int i;
+    ret = 0;
+    mask = 3;
+    for (i = 0; i < 16; i += 2) {
+        ret |= (val >> i) & mask;
+        mask <<= 2;
+    }
+    return ret;
+}
+
+/* Pad basic MPU access permission bits to extended format.  */
+static uint32_t extended_mpu_ap_bits(uint32_t val)
+{
+    uint32_t ret;
+    uint32_t mask;
+    int i;
+    ret = 0;
+    mask = 3;
+    for (i = 0; i < 16; i += 2) {
+        ret |= (val & mask) << i;
+        mask <<= 2;
+    }
+    return ret;
+}
+
 void helper_set_cp15(CPUState *env, uint32_t insn, uint32_t val)
 {
     uint32_t op2;
+    uint32_t crm;
 
     op2 = (insn >> 5) & 7;
+    crm = insn & 0xf;
     switch ((insn >> 16) & 0xf) {
     case 0: /* ID codes.  */
         goto bad_reg;
     case 1: /* System configuration.  */
         switch (op2) {
         case 0:
-            if (!arm_feature(env, ARM_FEATURE_XSCALE) || (insn & 0xf) == 0)
+            if (!arm_feature(env, ARM_FEATURE_XSCALE) || crm == 0)
                 env->cp15.c1_sys = val;
             /* ??? Lots of these bits are not implemented.  */
             /* This may enable/disable the MMU, so do a TLB flush.  */
@@ -571,38 +662,71 @@ void helper_set_cp15(CPUState *env, uint32_t insn, uint32_t val)
             goto bad_reg;
         }
         break;
-    case 2: /* MMU Page table control.  */
-        env->cp15.c2 = val;
+    case 2: /* MMU Page table control / MPU cache control.  */
+        if (arm_feature(env, ARM_FEATURE_MPU)) {
+            switch (op2) {
+            case 0:
+                env->cp15.c2_data = val;
+                break;
+            case 1:
+                env->cp15.c2_insn = val;
+                break;
+            default:
+                goto bad_reg;
+            }
+        } else {
+            env->cp15.c2_base = val;
+        }
         break;
-    case 3: /* MMU Domain access control.  */
+    case 3: /* MMU Domain access control / MPU write buffer control.  */
         env->cp15.c3 = val;
         break;
     case 4: /* Reserved.  */
         goto bad_reg;
-    case 5: /* MMU Fault status.  */
+    case 5: /* MMU Fault status / MPU access permission.  */
         switch (op2) {
         case 0:
+            if (arm_feature(env, ARM_FEATURE_MPU))
+                val = extended_mpu_ap_bits(val);
             env->cp15.c5_data = val;
             break;
         case 1:
+            if (arm_feature(env, ARM_FEATURE_MPU))
+                val = extended_mpu_ap_bits(val);
             env->cp15.c5_insn = val;
             break;
-        default:
-            goto bad_reg;
-        }
-        break;
-    case 6: /* MMU Fault address.  */
-        switch (op2) {
-        case 0:
-            env->cp15.c6_data = val;
+        case 2:
+            if (!arm_feature(env, ARM_FEATURE_MPU))
+                goto bad_reg;
+            env->cp15.c5_data = val;
             break;
-        case 1:
-            env->cp15.c6_insn = val;
+        case 3:
+            if (!arm_feature(env, ARM_FEATURE_MPU))
+                goto bad_reg;
+            env->cp15.c5_insn = val;
             break;
         default:
             goto bad_reg;
         }
         break;
+    case 6: /* MMU Fault address / MPU base/size.  */
+        if (arm_feature(env, ARM_FEATURE_MPU)) {
+            if (crm >= 8)
+                goto bad_reg;
+            env->cp15.c6_region[crm] = val;
+        } else {
+            switch (op2) {
+            case 0:
+                env->cp15.c6_data = val;
+                break;
+            case 1:
+                env->cp15.c6_insn = val;
+                break;
+            default:
+                goto bad_reg;
+            }
+        }
+        break;
     case 7: /* Cache control.  */
         /* No cache, so nothing to do.  */
         break;
@@ -629,14 +753,23 @@ void helper_set_cp15(CPUState *env, uint32_t insn, uint32_t val)
             goto bad_reg;
         }
         break;
-    case 9: /* Cache lockdown.  */
-        switch (op2) {
-        case 0:
-            env->cp15.c9_data = val;
-            break;
-        case 1:
-            env->cp15.c9_insn = val;
+    case 9:
+        switch (crm) {
+        case 0: /* Cache lockdown.  */
+            switch (op2) {
+            case 0:
+                env->cp15.c9_data = val;
+                break;
+            case 1:
+                env->cp15.c9_insn = val;
+                break;
+            default:
+                goto bad_reg;
+            }
             break;
+        case 1: /* TCM memory region registers.  */
+            /* Not implemented.  */
+            goto bad_reg;
         default:
             goto bad_reg;
         }
@@ -644,12 +777,13 @@ void helper_set_cp15(CPUState *env, uint32_t insn, uint32_t val)
     case 10: /* MMU TLB lockdown.  */
         /* ??? TLB lockdown not implemented.  */
         break;
-    case 11: /* TCM DMA control.  */
     case 12: /* Reserved.  */
         goto bad_reg;
     case 13: /* Process ID.  */
         switch (op2) {
         case 0:
+            if (!arm_feature(env, ARM_FEATURE_MPU))
+                goto bad_reg;
             /* Unlike real hardware the qemu TLB uses virtual addresses,
                not modified virtual addresses, so this causes a TLB flush.
              */
@@ -659,7 +793,8 @@ void helper_set_cp15(CPUState *env, uint32_t insn, uint32_t val)
             break;
         case 1:
             /* This changes the ASID, so do a TLB flush.  */
-            if (env->cp15.c13_context != val)
+            if (env->cp15.c13_context != val
+                && !arm_feature(env, ARM_FEATURE_MPU))
               tlb_flush(env, 0);
             env->cp15.c13_context = val;
             break;
@@ -671,7 +806,7 @@ void helper_set_cp15(CPUState *env, uint32_t insn, uint32_t val)
         goto bad_reg;
     case 15: /* Implementation specific.  */
         if (arm_feature(env, ARM_FEATURE_XSCALE)) {
-            if (op2 == 0 && (insn & 0xf) == 1) {
+            if (op2 == 0 && crm == 1) {
                 /* Changes cp0 to cp13 behavior, so needs a TB flush.  */
                 tb_flush(env);
                 env->cp15.c15_cpar = (val & 0x3fff) | 2;
@@ -717,31 +852,64 @@ uint32_t helper_get_cp15(CPUState *env, uint32_t insn)
         default:
             goto bad_reg;
         }
-    case 2: /* MMU Page table control.  */
-        return env->cp15.c2;
-    case 3: /* MMU Domain access control.  */
+    case 2: /* MMU Page table control / MPU cache control.  */
+        if (arm_feature(env, ARM_FEATURE_MPU)) {
+            switch (op2) {
+            case 0:
+                return env->cp15.c2_data;
+                break;
+            case 1:
+                return env->cp15.c2_insn;
+                break;
+            default:
+                goto bad_reg;
+            }
+        } else {
+            return env->cp15.c2_base;
+        }
+    case 3: /* MMU Domain access control / MPU write buffer control.  */
         return env->cp15.c3;
     case 4: /* Reserved.  */
         goto bad_reg;
-    case 5: /* MMU Fault status.  */
+    case 5: /* MMU Fault status / MPU access permission.  */
         switch (op2) {
         case 0:
+            if (arm_feature(env, ARM_FEATURE_MPU))
+                return simple_mpu_ap_bits(env->cp15.c5_data);
             return env->cp15.c5_data;
         case 1:
+            if (arm_feature(env, ARM_FEATURE_MPU))
+                return simple_mpu_ap_bits(env->cp15.c5_data);
+            return env->cp15.c5_insn;
+        case 2:
+            if (!arm_feature(env, ARM_FEATURE_MPU))
+                goto bad_reg;
+            return env->cp15.c5_data;
+        case 3:
+            if (!arm_feature(env, ARM_FEATURE_MPU))
+                goto bad_reg;
             return env->cp15.c5_insn;
         default:
             goto bad_reg;
         }
-    case 6: /* MMU Fault address.  */
-        switch (op2) {
-        case 0:
-            return env->cp15.c6_data;
-        case 1:
-            /* Arm9 doesn't have an IFAR, but implementing it anyway shouldn't
-               do any harm.  */
-            return env->cp15.c6_insn;
-        default:
-            goto bad_reg;
+    case 6: /* MMU Fault address / MPU base/size.  */
+        if (arm_feature(env, ARM_FEATURE_MPU)) {
+            int n;
+            n = (insn & 0xf);
+            if (n >= 8)
+                goto bad_reg;
+            return env->cp15.c6_region[n];
+        } else {
+            switch (op2) {
+            case 0:
+                return env->cp15.c6_data;
+            case 1:
+                /* Arm9 doesn't have an IFAR, but implementing it anyway
+                   shouldn't do any harm.  */
+                return env->cp15.c6_insn;
+            default:
+                goto bad_reg;
+            }
         }
     case 7: /* Cache control.  */
         /* ??? This is for test, clean and invaidate operations that set the