aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAnthony Liguori <aliguori@us.ibm.com>2012-04-10 08:21:58 -0500
committerAnthony Liguori <aliguori@us.ibm.com>2012-04-10 08:21:58 -0500
commit4e1957acc854b2f3f3068c75cef2a429f9b97011 (patch)
treecab3ca24ed0fc963cb693c0d440a9495a2cc47eb
parent6da25bd5e8355230b9562417e386728c31783002 (diff)
parentff71f2e8cacefae99179993204172bc65e4303df (diff)
Merge commit 'ff71f2e8cacefae99179993204172bc65e4303df' into staging
* commit 'ff71f2e8cacefae99179993204172bc65e4303df': (21 commits) rtl8139: do the network/host communication only in normal operating mode rtl8139: correctly check the opmode net: move compute_mcast_idx() to net.h rtl8139: support byte read to TxStatus registers rtl8139: remove unused marco rtl8139: limit transmission buffer size in c+ mode pci_regs: Add PCI_EXP_TYPE_PCIE_BRIDGE virtio-net: add DATA_VALID flag pci_bridge: upper 32 bit are long registers pci: fix bridge IO/BASE pcie: drop functionality moved to core pci: set memory type for memory behind the bridge pci: add standard bridge device slotid: add slot id capability shpc: standard hot plug controller pci_bridge: user-friendly default bus name pci: make another unused extern function static pci: don't export an internal function pci_regs: Fix value of PCI_EXP_TYPE_RC_EC. pci: Do not check if a bus exist in pci_parse_devaddr. ...
-rw-r--r--Makefile.objs4
-rw-r--r--hw/eepro100.c25
-rw-r--r--hw/ne2000.c24
-rw-r--r--hw/opencores_eth.c25
-rw-r--r--hw/pci.c28
-rw-r--r--hw/pci.h11
-rw-r--r--hw/pci_bridge.c22
-rw-r--r--hw/pci_bridge_dev.c174
-rw-r--r--hw/pci_regs.h3
-rw-r--r--hw/pcie_port.c12
-rw-r--r--hw/rtl8139.c88
-rw-r--r--hw/shpc.c681
-rw-r--r--hw/shpc.h48
-rw-r--r--hw/slotid_cap.c44
-rw-r--r--hw/slotid_cap.h11
-rw-r--r--hw/virtio-net.h1
-rw-r--r--net.c23
-rw-r--r--net.h3
-rw-r--r--qemu-common.h1
19 files changed, 1078 insertions, 150 deletions
diff --git a/Makefile.objs b/Makefile.objs
index f308b574d7..5c3bcdaa39 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -213,8 +213,10 @@ hw-obj-$(CONFIG_VIRTIO) += virtio-console.o
hw-obj-y += usb/libhw.o
hw-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
hw-obj-y += fw_cfg.o
-hw-obj-$(CONFIG_PCI) += pci.o pci_bridge.o
+hw-obj-$(CONFIG_PCI) += pci.o pci_bridge.o pci_bridge_dev.o
hw-obj-$(CONFIG_PCI) += msix.o msi.o
+hw-obj-$(CONFIG_PCI) += shpc.o
+hw-obj-$(CONFIG_PCI) += slotid_cap.o
hw-obj-$(CONFIG_PCI) += pci_host.o pcie_host.o
hw-obj-$(CONFIG_PCI) += ioh3420.o xio3130_upstream.o xio3130_downstream.o
hw-obj-y += watchdog.o
diff --git a/hw/eepro100.c b/hw/eepro100.c
index e3ba71974e..02e6f7ef31 100644
--- a/hw/eepro100.c
+++ b/hw/eepro100.c
@@ -322,33 +322,8 @@ static const uint16_t eepro100_mdi_mask[] = {
0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
};
-#define POLYNOMIAL 0x04c11db6
-
static E100PCIDeviceInfo *eepro100_get_class(EEPRO100State *s);
-/* From FreeBSD */
-/* XXX: optimize */
-static unsigned compute_mcast_idx(const uint8_t * ep)
-{
- uint32_t crc;
- int carry, i, j;
- uint8_t b;
-
- crc = 0xffffffff;
- for (i = 0; i < 6; i++) {
- b = *ep++;
- for (j = 0; j < 8; j++) {
- carry = ((crc & 0x80000000L) ? 1 : 0) ^ (b & 0x01);
- crc <<= 1;
- b >>= 1;
- if (carry) {
- crc = ((crc ^ POLYNOMIAL) | carry);
- }
- }
- }
- return (crc & BITS(7, 2)) >> 2;
-}
-
/* Read a 16 bit control/status (CSR) register. */
static uint16_t e100_read_reg2(EEPRO100State *s, E100RegisterOffset addr)
{
diff --git a/hw/ne2000.c b/hw/ne2000.c
index 71452e1f2e..d02e60c4a6 100644
--- a/hw/ne2000.c
+++ b/hw/ne2000.c
@@ -150,30 +150,6 @@ static void ne2000_update_irq(NE2000State *s)
qemu_set_irq(s->irq, (isr != 0));
}
-#define POLYNOMIAL 0x04c11db6
-
-/* From FreeBSD */
-/* XXX: optimize */
-static int compute_mcast_idx(const uint8_t *ep)
-{
- uint32_t crc;
- int carry, i, j;
- uint8_t b;
-
- crc = 0xffffffff;
- for (i = 0; i < 6; i++) {
- b = *ep++;
- for (j = 0; j < 8; j++) {
- carry = ((crc & 0x80000000L) ? 1 : 0) ^ (b & 0x01);
- crc <<= 1;
- b >>= 1;
- if (carry)
- crc = ((crc ^ POLYNOMIAL) | carry);
- }
- }
- return (crc >> 26);
-}
-
static int ne2000_buffer_full(NE2000State *s)
{
int avail, index, boundary;
diff --git a/hw/opencores_eth.c b/hw/opencores_eth.c
index 4c7696935f..350f73173a 100644
--- a/hw/opencores_eth.c
+++ b/hw/opencores_eth.c
@@ -351,31 +351,6 @@ static int open_eth_can_receive(VLANClientState *nc)
(rx_desc(s)->len_flags & RXD_E);
}
-#define POLYNOMIAL 0x04c11db6
-
-/* From FreeBSD */
-/* XXX: optimize */
-static unsigned compute_mcast_idx(const uint8_t *ep)
-{
- uint32_t crc;
- int carry, i, j;
- uint8_t b;
-
- crc = 0xffffffff;
- for (i = 0; i < 6; i++) {
- b = *ep++;
- for (j = 0; j < 8; j++) {
- carry = ((crc & 0x80000000L) ? 1 : 0) ^ (b & 0x01);
- crc <<= 1;
- b >>= 1;
- if (carry) {
- crc = ((crc ^ POLYNOMIAL) | carry);
- }
- }
- }
- return crc >> 26;
-}
-
static ssize_t open_eth_receive(VLANClientState *nc,
const uint8_t *buf, size_t size)
{
diff --git a/hw/pci.c b/hw/pci.c
index ed8ec99073..b706e6980a 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -63,6 +63,7 @@ struct BusInfo pci_bus_info = {
}
};
+static PCIBus *pci_find_bus_nr(PCIBus *bus, int bus_num);
static void pci_update_mappings(PCIDevice *d);
static void pci_set_irq(void *opaque, int irq_num, int level);
static int pci_add_option_rom(PCIDevice *pdev, bool is_default_rom);
@@ -478,7 +479,7 @@ static void pci_set_default_subsystem_id(PCIDevice *pci_dev)
* Parse [[<domain>:]<bus>:]<slot>, return -1 on error if funcp == NULL
* [[<domain>:]<bus>:]<slot>.<func>, return -1 on error
*/
-int pci_parse_devaddr(const char *addr, int *domp, int *busp,
+static int pci_parse_devaddr(const char *addr, int *domp, int *busp,
unsigned int *slotp, unsigned int *funcp)
{
const char *p;
@@ -529,10 +530,6 @@ int pci_parse_devaddr(const char *addr, int *domp, int *busp,
if (*e)
return -1;
- /* Note: QEMU doesn't implement domains other than 0 */
- if (!pci_find_bus(pci_find_root_bus(dom), bus))
- return -1;
-
*domp = dom;
*busp = bus;
*slotp = slot;
@@ -562,7 +559,7 @@ PCIBus *pci_get_bus_devfn(int *devfnp, const char *devaddr)
if (!devaddr) {
*devfnp = -1;
- return pci_find_bus(pci_find_root_bus(0), 0);
+ return pci_find_bus_nr(pci_find_root_bus(0), 0);
}
if (pci_parse_devaddr(devaddr, &dom, &bus, &slot, NULL) < 0) {
@@ -570,7 +567,7 @@ PCIBus *pci_get_bus_devfn(int *devfnp, const char *devaddr)
}
*devfnp = PCI_DEVFN(slot, 0);
- return pci_find_bus(pci_find_root_bus(dom), bus);
+ return pci_find_bus_nr(pci_find_root_bus(dom), bus);
}
static void pci_init_cmask(PCIDevice *dev)
@@ -636,8 +633,8 @@ static void pci_init_mask_bridge(PCIDevice *d)
memset(d->wmask + PCI_PREF_BASE_UPPER32, 0xff, 8);
/* Supported memory and i/o types */
- d->config[PCI_IO_BASE] |= PCI_IO_RANGE_TYPE_32;
- d->config[PCI_IO_LIMIT] |= PCI_IO_RANGE_TYPE_32;
+ d->config[PCI_IO_BASE] |= PCI_IO_RANGE_TYPE_16;
+ d->config[PCI_IO_LIMIT] |= PCI_IO_RANGE_TYPE_16;
pci_word_test_and_set_mask(d->config + PCI_PREF_MEMORY_BASE,
PCI_PREF_RANGE_TYPE_64);
pci_word_test_and_set_mask(d->config + PCI_PREF_MEMORY_LIMIT,
@@ -666,8 +663,11 @@ static void pci_init_mask_bridge(PCIDevice *d)
pci_set_word(d->w1cmask + PCI_BRIDGE_CONTROL,
PCI_BRIDGE_CTL_DISCARD_STATUS);
d->cmask[PCI_IO_BASE] |= PCI_IO_RANGE_TYPE_MASK;
+ d->cmask[PCI_IO_LIMIT] |= PCI_IO_RANGE_TYPE_MASK;
pci_word_test_and_set_mask(d->cmask + PCI_PREF_MEMORY_BASE,
PCI_PREF_RANGE_TYPE_MASK);
+ pci_word_test_and_set_mask(d->cmask + PCI_PREF_MEMORY_LIMIT,
+ PCI_PREF_RANGE_TYPE_MASK);
}
static int pci_init_multifunction(PCIBus *bus, PCIDevice *dev)
@@ -1143,7 +1143,7 @@ static void pci_for_each_device_under_bus(PCIBus *bus,
void pci_for_each_device(PCIBus *bus, int bus_num,
void (*fn)(PCIBus *b, PCIDevice *d))
{
- bus = pci_find_bus(bus, bus_num);
+ bus = pci_find_bus_nr(bus, bus_num);
if (bus) {
pci_for_each_device_under_bus(bus, fn);
@@ -1230,7 +1230,7 @@ static PciBridgeInfo *qmp_query_pci_bridge(PCIDevice *dev, PCIBus *bus,
info->bus.prefetchable_range->limit = pci_bridge_get_limit(dev, PCI_BASE_ADDRESS_MEM_PREFETCH);
if (dev->config[PCI_SECONDARY_BUS] != 0) {
- PCIBus *child_bus = pci_find_bus(bus, dev->config[PCI_SECONDARY_BUS]);
+ PCIBus *child_bus = pci_find_bus_nr(bus, dev->config[PCI_SECONDARY_BUS]);
if (child_bus) {
info->has_devices = true;
info->devices = qmp_query_pci_devices(child_bus, dev->config[PCI_SECONDARY_BUS]);
@@ -1309,7 +1309,7 @@ static PciInfo *qmp_query_pci_bus(PCIBus *bus, int bus_num)
{
PciInfo *info = NULL;
- bus = pci_find_bus(bus, bus_num);
+ bus = pci_find_bus_nr(bus, bus_num);
if (bus) {
info = g_malloc0(sizeof(*info));
info->bus = bus_num;
@@ -1419,7 +1419,7 @@ static bool pci_secondary_bus_in_range(PCIDevice *dev, int bus_num)
bus_num <= dev->config[PCI_SUBORDINATE_BUS];
}
-PCIBus *pci_find_bus(PCIBus *bus, int bus_num)
+static PCIBus *pci_find_bus_nr(PCIBus *bus, int bus_num)
{
PCIBus *sec;
@@ -1455,7 +1455,7 @@ PCIBus *pci_find_bus(PCIBus *bus, int bus_num)
PCIDevice *pci_find_device(PCIBus *bus, int bus_num, uint8_t devfn)
{
- bus = pci_find_bus(bus, bus_num);
+ bus = pci_find_bus_nr(bus, bus_num);
if (!bus)
return NULL;
diff --git a/hw/pci.h b/hw/pci.h
index 4f19fdbd89..8d0aa498e5 100644
--- a/hw/pci.h
+++ b/hw/pci.h
@@ -126,6 +126,11 @@ enum {
/* command register SERR bit enabled */
#define QEMU_PCI_CAP_SERR_BITNR 4
QEMU_PCI_CAP_SERR = (1 << QEMU_PCI_CAP_SERR_BITNR),
+ /* Standard hot plug controller. */
+#define QEMU_PCI_SHPC_BITNR 5
+ QEMU_PCI_CAP_SHPC = (1 << QEMU_PCI_SHPC_BITNR),
+#define QEMU_PCI_SLOTID_BITNR 6
+ QEMU_PCI_CAP_SLOTID = (1 << QEMU_PCI_SLOTID_BITNR),
};
#define TYPE_PCI_DEVICE "pci-device"
@@ -230,6 +235,9 @@ struct PCIDevice {
/* PCI Express */
PCIExpressDevice exp;
+ /* SHPC */
+ SHPCDevice *shpc;
+
/* Location of option rom */
char *romfile;
bool has_rom;
@@ -299,13 +307,10 @@ int pci_bus_num(PCIBus *s);
void pci_for_each_device(PCIBus *bus, int bus_num, void (*fn)(PCIBus *bus, PCIDevice *d));
PCIBus *pci_find_root_bus(int domain);
int pci_find_domain(const PCIBus *bus);
-PCIBus *pci_find_bus(PCIBus *bus, int bus_num);
PCIDevice *pci_find_device(PCIBus *bus, int bus_num, uint8_t devfn);
int pci_qdev_find_device(const char *id, PCIDevice **pdev);
PCIBus *pci_get_bus_devfn(int *devfnp, const char *devaddr);
-int pci_parse_devaddr(const char *addr, int *domp, int *busp,
- unsigned int *slotp, unsigned int *funcp);
int pci_read_devaddr(Monitor *mon, const char *addr, int *domp, int *busp,
unsigned *slotp);
diff --git a/hw/pci_bridge.c b/hw/pci_bridge.c
index 1ed43394de..866f0b6c52 100644
--- a/hw/pci_bridge.c
+++ b/hw/pci_bridge.c
@@ -249,8 +249,8 @@ void pci_bridge_disable_base_limit(PCIDevice *dev)
PCI_PREF_RANGE_MASK & 0xffff);
pci_word_test_and_clear_mask(conf + PCI_PREF_MEMORY_LIMIT,
PCI_PREF_RANGE_MASK & 0xffff);
- pci_set_word(conf + PCI_PREF_BASE_UPPER32, 0);
- pci_set_word(conf + PCI_PREF_LIMIT_UPPER32, 0);
+ pci_set_long(conf + PCI_PREF_BASE_UPPER32, 0);
+ pci_set_long(conf + PCI_PREF_LIMIT_UPPER32, 0);
}
/* reset bridge specific configuration registers */
@@ -285,8 +285,8 @@ void pci_bridge_reset_reg(PCIDevice *dev)
PCI_PREF_RANGE_MASK & 0xffff);
pci_word_test_and_clear_mask(conf + PCI_PREF_MEMORY_LIMIT,
PCI_PREF_RANGE_MASK & 0xffff);
- pci_set_word(conf + PCI_PREF_BASE_UPPER32, 0);
- pci_set_word(conf + PCI_PREF_LIMIT_UPPER32, 0);
+ pci_set_long(conf + PCI_PREF_BASE_UPPER32, 0);
+ pci_set_long(conf + PCI_PREF_LIMIT_UPPER32, 0);
pci_set_word(conf + PCI_BRIDGE_CONTROL, 0);
}
@@ -305,8 +305,8 @@ int pci_bridge_initfn(PCIDevice *dev)
PCIBridge *br = DO_UPCAST(PCIBridge, dev, dev);
PCIBus *sec_bus = &br->sec_bus;
- pci_set_word(dev->config + PCI_STATUS,
- PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK);
+ pci_word_test_and_set_mask(dev->config + PCI_STATUS,
+ PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK);
pci_config_set_class(dev->config, PCI_CLASS_BRIDGE_PCI);
dev->config[PCI_HEADER_TYPE] =
(dev->config[PCI_HEADER_TYPE] & PCI_HEADER_TYPE_MULTI_FUNCTION) |
@@ -314,6 +314,16 @@ int pci_bridge_initfn(PCIDevice *dev)
pci_set_word(dev->config + PCI_SEC_STATUS,
PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK);
+ /*
+ * If we don't specify the name, the bus will be addressed as <id>.0, where
+ * id is the device id.
+ * Since PCI Bridge devices have a single bus each, we don't need the index:
+ * let users address the bus using the device name.
+ */
+ if (!br->bus_name && dev->qdev.id && *dev->qdev.id) {
+ br->bus_name = dev->qdev.id;
+ }
+
qbus_create_inplace(&sec_bus->qbus, &pci_bus_info, &dev->qdev,
br->bus_name);
sec_bus->parent_dev = dev;
diff --git a/hw/pci_bridge_dev.c b/hw/pci_bridge_dev.c
new file mode 100644
index 0000000000..eccaa5831e
--- /dev/null
+++ b/hw/pci_bridge_dev.c
@@ -0,0 +1,174 @@
+/*
+ * Standard PCI Bridge Device
+ *
+ * Copyright (c) 2011 Red Hat Inc. Author: Michael S. Tsirkin <mst@redhat.com>
+ *
+ * http://www.pcisig.com/specifications/conventional/pci_to_pci_bridge_architecture/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "pci_bridge.h"
+#include "pci_ids.h"
+#include "msi.h"
+#include "shpc.h"
+#include "slotid_cap.h"
+#include "memory.h"
+#include "pci_internals.h"
+
+#define REDHAT_PCI_VENDOR_ID 0x1b36
+#define PCI_BRIDGE_DEV_VENDOR_ID REDHAT_PCI_VENDOR_ID
+#define PCI_BRIDGE_DEV_DEVICE_ID 0x1
+
+struct PCIBridgeDev {
+ PCIBridge bridge;
+ MemoryRegion bar;
+ uint8_t chassis_nr;
+#define PCI_BRIDGE_DEV_F_MSI_REQ 0
+ uint32_t flags;
+};
+typedef struct PCIBridgeDev PCIBridgeDev;
+
+/* Mapping mandated by PCI-to-PCI Bridge architecture specification,
+ * revision 1.2 */
+/* Table 9-1: Interrupt Binding for Devices Behind a Bridge */
+static int pci_bridge_dev_map_irq_fn(PCIDevice *dev, int irq_num)
+{
+ return (irq_num + PCI_SLOT(dev->devfn)) % PCI_NUM_PINS;
+}
+
+static int pci_bridge_dev_initfn(PCIDevice *dev)
+{
+ PCIBridge *br = DO_UPCAST(PCIBridge, dev, dev);
+ PCIBridgeDev *bridge_dev = DO_UPCAST(PCIBridgeDev, bridge, br);
+ int err;
+ pci_bridge_map_irq(br, NULL, pci_bridge_dev_map_irq_fn);
+ err = pci_bridge_initfn(dev);
+ if (err) {
+ goto bridge_error;
+ }
+ memory_region_init(&bridge_dev->bar, "shpc-bar", shpc_bar_size(dev));
+ err = shpc_init(dev, &br->sec_bus, &bridge_dev->bar, 0);
+ if (err) {
+ goto shpc_error;
+ }
+ err = slotid_cap_init(dev, 0, bridge_dev->chassis_nr, 0);
+ if (err) {
+ goto slotid_error;
+ }
+ if ((bridge_dev->flags & (1 << PCI_BRIDGE_DEV_F_MSI_REQ)) &&
+ msi_supported) {
+ err = msi_init(dev, 0, 1, true, true);
+ if (err < 0) {
+ goto msi_error;
+ }
+ }
+ /* TODO: spec recommends using 64 bit prefetcheable BAR.
+ * Check whether that works well. */
+ pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64, &bridge_dev->bar);
+ dev->config[PCI_INTERRUPT_PIN] = 0x1;
+ return 0;
+msi_error:
+ slotid_cap_cleanup(dev);
+slotid_error:
+ shpc_cleanup(dev, &bridge_dev->bar);
+shpc_error:
+ memory_region_destroy(&bridge_dev->bar);
+bridge_error:
+ return err;
+}
+
+static int pci_bridge_dev_exitfn(PCIDevice *dev)
+{
+ PCIBridge *br = DO_UPCAST(PCIBridge, dev, dev);
+ PCIBridgeDev *bridge_dev = DO_UPCAST(PCIBridgeDev, bridge, br);
+ int ret;
+ if (msi_present(dev)) {
+ msi_uninit(dev);
+ }
+ slotid_cap_cleanup(dev);
+ shpc_cleanup(dev, &bridge_dev->bar);
+ memory_region_destroy(&bridge_dev->bar);
+ ret = pci_bridge_exitfn(dev);
+ assert(!ret);
+ return 0;
+}
+
+static void pci_bridge_dev_write_config(PCIDevice *d,
+ uint32_t address, uint32_t val, int len)
+{
+ pci_bridge_write_config(d, address, val, len);
+ if (msi_present(d)) {
+ msi_write_config(d, address, val, len);
+ }
+ shpc_cap_write_config(d, address, val, len);
+}
+
+static void qdev_pci_bridge_dev_reset(DeviceState *qdev)
+{
+ PCIDevice *dev = DO_UPCAST(PCIDevice, qdev, qdev);
+ pci_bridge_reset(qdev);
+ if (msi_present(dev)) {
+ msi_reset(dev);
+ }
+ shpc_reset(dev);
+}
+
+static Property pci_bridge_dev_properties[] = {
+ /* Note: 0 is not a legal chassis number. */
+ DEFINE_PROP_UINT8("chassis_nr", PCIBridgeDev, chassis_nr, 0),
+ DEFINE_PROP_BIT("msi", PCIBridgeDev, flags, PCI_BRIDGE_DEV_F_MSI_REQ, true),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static const VMStateDescription pci_bridge_dev_vmstate = {
+ .name = "pci_bridge",
+ .fields = (VMStateField[]) {
+ VMSTATE_PCI_DEVICE(bridge.dev, PCIBridgeDev),
+ SHPC_VMSTATE(bridge.dev.shpc, PCIBridgeDev),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void pci_bridge_dev_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+ k->init = pci_bridge_dev_initfn;
+ k->exit = pci_bridge_dev_exitfn;
+ k->config_write = pci_bridge_dev_write_config;
+ k->vendor_id = PCI_BRIDGE_DEV_VENDOR_ID;
+ k->device_id = PCI_BRIDGE_DEV_DEVICE_ID;
+ k->class_id = PCI_CLASS_BRIDGE_PCI;
+ k->is_bridge = 1,
+ dc->desc = "Standard PCI Bridge";
+ dc->reset = qdev_pci_bridge_dev_reset;
+ dc->props = pci_bridge_dev_properties;
+ dc->vmsd = &pci_bridge_dev_vmstate;
+}
+
+static TypeInfo pci_bridge_dev_info = {
+ .name = "pci-bridge",
+ .parent = TYPE_PCI_DEVICE,
+ .instance_size = sizeof(PCIBridgeDev),
+ .class_init = pci_bridge_dev_class_init,
+};
+
+static void pci_bridge_dev_register(void)
+{
+ type_register_static(&pci_bridge_dev_info);
+}
+
+type_init(pci_bridge_dev_register);
diff --git a/hw/pci_regs.h b/hw/pci_regs.h
index e8357c3ea6..56a404be6e 100644
--- a/hw/pci_regs.h
+++ b/hw/pci_regs.h
@@ -392,8 +392,9 @@
#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */
#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */
#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */
+#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIE Bridge */
#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */
-#define PCI_EXP_TYPE_RC_EC 0x10 /* Root Complex Event Collector */
+#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */
#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */
#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */
#define PCI_EXP_DEVCAP 4 /* Device capabilities */
diff --git a/hw/pcie_port.c b/hw/pcie_port.c
index 8a36f5cfc7..d6350e5e73 100644
--- a/hw/pcie_port.c
+++ b/hw/pcie_port.c
@@ -27,23 +27,13 @@ void pcie_port_init_reg(PCIDevice *d)
pci_set_word(d->config + PCI_STATUS, 0);
pci_set_word(d->config + PCI_SEC_STATUS, 0);
- /* Unlike conventional pci bridge, some bits are hardwared to 0. */
+ /* Unlike conventional pci bridge, some bits are hardwired to 0. */
pci_set_word(d->wmask + PCI_BRIDGE_CONTROL,
PCI_BRIDGE_CTL_PARITY |
PCI_BRIDGE_CTL_ISA |
PCI_BRIDGE_CTL_VGA |
PCI_BRIDGE_CTL_SERR |
PCI_BRIDGE_CTL_BUS_RESET);
-
- /* 7.5.3.5 Prefetchable Memory Base Limit
- * The Prefetchable Memory Base and Prefetchable Memory Limit registers
- * must indicate that 64-bit addresses are supported, as defined in
- * PCI-to-PCI Bridge Architecture Specification, Revision 1.2.
- */
- pci_word_test_and_set_mask(d->config + PCI_PREF_MEMORY_BASE,
- PCI_PREF_RANGE_TYPE_64);
- pci_word_test_and_set_mask(d->config + PCI_PREF_MEMORY_LIMIT,
- PCI_PREF_RANGE_TYPE_64);
}
/**************************************************************************
diff --git a/hw/rtl8139.c b/hw/rtl8139.c
index 05b8e1e3d7..4d553a8a59 100644
--- a/hw/rtl8139.c
+++ b/hw/rtl8139.c
@@ -65,9 +65,6 @@
#define PCI_FREQUENCY 33000000L
-/* debug RTL8139 card C+ mode only */
-//#define DEBUG_RTL8139CP 1
-
#define SET_MASKED(input, mask, curr) \
( ( (input) & ~(mask) ) | ( (curr) & (mask) ) )
@@ -335,8 +332,10 @@ enum CSCRBits {
};
enum Cfg9346Bits {
- Cfg9346_Lock = 0x00,
- Cfg9346_Unlock = 0xC0,
+ Cfg9346_Normal = 0x00,
+ Cfg9346_Autoload = 0x40,
+ Cfg9346_Programming = 0x80,
+ Cfg9346_ConfigWrite = 0xC0,
};
typedef enum {
@@ -711,30 +710,6 @@ static void rtl8139_update_irq(RTL8139State *s)
qemu_set_irq(s->dev.irq[0], (isr != 0));
}
-#define POLYNOMIAL 0x04c11db6
-
-/* From FreeBSD */
-/* XXX: optimize */
-static int compute_mcast_idx(const uint8_t *ep)
-{
- uint32_t crc;
- int carry, i, j;
- uint8_t b;
-
- crc = 0xffffffff;
- for (i = 0; i < 6; i++) {
- b = *ep++;
- for (j = 0; j < 8; j++) {
- carry = ((crc & 0x80000000L) ? 1 : 0) ^ (b & 0x01);
- crc <<= 1;
- b >>= 1;
- if (carry)
- crc = ((crc ^ POLYNOMIAL) | carry);
- }
- }
- return (crc >> 26);
-}
-
static int rtl8139_RxWrap(RTL8139State *s)
{
/* wrapping enabled; assume 1.5k more buffer space if size < 65536 */
@@ -816,6 +791,9 @@ static int rtl8139_can_receive(VLANClientState *nc)
return 1;
if (!rtl8139_receiver_enabled(s))
return 1;
+ /* network/host communication happens only in normal mode */
+ if ((s->Cfg9346 & Chip9346_op_mask) != Cfg9346_Normal)
+ return 0;
if (rtl8139_cp_receiver_enabled(s)) {
/* ??? Flow control not implemented in c+ mode.
@@ -858,6 +836,12 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc, const uint8_t *buf, size_
return -1;
}
+ /* check whether we are in normal mode */
+ if ((s->Cfg9346 & Chip9346_op_mask) != Cfg9346_Normal) {
+ DPRINTF("not in normal op mode\n");
+ return -1;
+ }
+
/* XXX: check this */
if (s->RxConfig & AcceptAllPhys) {
/* promiscuous: receive all */
@@ -1478,7 +1462,7 @@ static uint32_t rtl8139_IntrMitigate_read(RTL8139State *s)
static int rtl8139_config_writable(RTL8139State *s)
{
- if (s->Cfg9346 & Cfg9346_Unlock)
+ if ((s->Cfg9346 & Chip9346_op_mask) == Cfg9346_ConfigWrite)
{
return 1;
}
@@ -2061,13 +2045,12 @@ static int rtl8139_cplus_transmit_one(RTL8139State *s)
s->cplus_txbuffer_len);
}
- while (s->cplus_txbuffer && s->cplus_txbuffer_offset + txsize >= s->cplus_txbuffer_len)
+ if (s->cplus_txbuffer_offset + txsize >= s->cplus_txbuffer_len)
{
- s->cplus_txbuffer_len += CP_TX_BUFFER_SIZE;
- s->cplus_txbuffer = g_realloc(s->cplus_txbuffer, s->cplus_txbuffer_len);
-
- DPRINTF("+++ C+ mode transmission buffer space changed to %d\n",
- s->cplus_txbuffer_len);
+ /* The spec didn't tell the maximum size, stick to CP_TX_BUFFER_SIZE */
+ txsize = s->cplus_txbuffer_len - s->cplus_txbuffer_offset;
+ DPRINTF("+++ C+ mode transmission buffer overrun, truncated descriptor"
+ "length to %d\n", txsize);
}
if (!s->cplus_txbuffer)
@@ -2499,11 +2482,30 @@ static void rtl8139_TxStatus_write(RTL8139State *s, uint32_t txRegOffset, uint32
rtl8139_transmit(s);
}
-static uint32_t rtl8139_TxStatus_read(RTL8139State *s, uint32_t txRegOffset)
+static uint32_t rtl8139_TxStatus_read(RTL8139State *s, uint8_t addr, int size)
{
- uint32_t ret = s->TxStatus[txRegOffset/4];
+ uint32_t reg = (addr - TxStatus0) / 4;
+ uint32_t offset = addr & 0x3;
+ uint32_t ret = 0;
- DPRINTF("TxStatus read offset=0x%x val=0x%08x\n", txRegOffset, ret);
+ if (addr & (size - 1)) {
+ DPRINTF("not implemented read for TxStatus addr=0x%x size=0x%x\n", addr,
+ size);
+ return ret;
+ }
+
+ switch (size) {
+ case 1: /* fall through */
+ case 2: /* fall through */
+ case 4:
+ ret = (s->TxStatus[reg] >> offset * 8) & ((1 << (size * 8)) - 1);
+ DPRINTF("TxStatus[%d] read addr=0x%x size=0x%x val=0x%08x\n", reg, addr,
+ size, ret);
+ break;
+ default:
+ DPRINTF("unsupported size 0x%x of TxStatus reading\n", size);
+ break;
+ }
return ret;
}
@@ -2974,6 +2976,9 @@ static uint32_t rtl8139_io_readb(void *opaque, uint8_t addr)
case MAR0 ... MAR0+7:
ret = s->mult[addr - MAR0];
break;
+ case TxStatus0 ... TxStatus0+4*4-1:
+ ret = rtl8139_TxStatus_read(s, addr, 1);
+ break;
case ChipCmd:
ret = rtl8139_ChipCmd_read(s);
break;
@@ -3037,6 +3042,9 @@ static uint32_t rtl8139_io_readw(void *opaque, uint8_t addr)
switch (addr)
{
+ case TxAddr0 ... TxAddr0+4*4-1:
+ ret = rtl8139_TxStatus_read(s, addr, 2);
+ break;
case IntrMask:
ret = rtl8139_IntrMask_read(s);
break;
@@ -3127,7 +3135,7 @@ static uint32_t rtl8139_io_readl(void *opaque, uint8_t addr)
break;
case TxStatus0 ... TxStatus0+4*4-1:
- ret = rtl8139_TxStatus_read(s, addr-TxStatus0);
+ ret = rtl8139_TxStatus_read(s, addr, 4);
break;
case TxAddr0 ... TxAddr0+4*4-1:
diff --git a/hw/shpc.c b/hw/shpc.c
new file mode 100644
index 0000000000..a5baf246f1
--- /dev/null
+++ b/hw/shpc.c
@@ -0,0 +1,681 @@
+#include <strings.h>
+#include <stdint.h>
+#include "range.h"
+#include "range.h"
+#include "shpc.h"
+#include "pci.h"
+#include "pci_internals.h"
+#include "msi.h"
+
+/* TODO: model power only and disabled slot states. */
+/* TODO: handle SERR and wakeups */
+/* TODO: consider enabling 66MHz support */
+
+/* TODO: remove fully only on state DISABLED and LED off.
+ * track state to properly record this. */
+
+/* SHPC Working Register Set */
+#define SHPC_BASE_OFFSET 0x00 /* 4 bytes */
+#define SHPC_SLOTS_33 0x04 /* 4 bytes. Also encodes PCI-X slots. */
+#define SHPC_SLOTS_66 0x08 /* 4 bytes. */
+#define SHPC_NSLOTS 0x0C /* 1 byte */
+#define SHPC_FIRST_DEV 0x0D /* 1 byte */
+#define SHPC_PHYS_SLOT 0x0E /* 2 byte */
+#define SHPC_PHYS_NUM_MAX 0x7ff
+#define SHPC_PHYS_NUM_UP 0x2000
+#define SHPC_PHYS_MRL 0x4000
+#define SHPC_PHYS_BUTTON 0x8000
+#define SHPC_SEC_BUS 0x10 /* 2 bytes */
+#define SHPC_SEC_BUS_33 0x0
+#define SHPC_SEC_BUS_66 0x1 /* Unused */
+#define SHPC_SEC_BUS_MASK 0x7
+#define SHPC_MSI_CTL 0x12 /* 1 byte */
+#define SHPC_PROG_IFC 0x13 /* 1 byte */
+#define SHPC_PROG_IFC_1_0 0x1
+#define SHPC_CMD_CODE 0x14 /* 1 byte */
+#define SHPC_CMD_TRGT 0x15 /* 1 byte */
+#define SHPC_CMD_TRGT_MIN 0x1
+#define SHPC_CMD_TRGT_MAX 0x1f
+#define SHPC_CMD_STATUS 0x16 /* 2 bytes */
+#define SHPC_CMD_STATUS_BUSY 0x1
+#define SHPC_CMD_STATUS_MRL_OPEN 0x2
+#define SHPC_CMD_STATUS_INVALID_CMD 0x4
+#define SHPC_CMD_STATUS_INVALID_MODE 0x8
+#define SHPC_INT_LOCATOR 0x18 /* 4 bytes */
+#define SHPC_INT_COMMAND 0x1
+#define SHPC_SERR_LOCATOR 0x1C /* 4 bytes */
+#define SHPC_SERR_INT 0x20 /* 4 bytes */
+#define SHPC_INT_DIS 0x1
+#define SHPC_SERR_DIS 0x2
+#define SHPC_CMD_INT_DIS 0x4
+#define SHPC_ARB_SERR_DIS 0x8
+#define SHPC_CMD_DETECTED 0x10000
+#define SHPC_ARB_DETECTED 0x20000
+ /* 4 bytes * slot # (start from 0) */
+#define SHPC_SLOT_REG(s) (0x24 + (s) * 4)
+ /* 2 bytes */
+#define SHPC_SLOT_STATUS(s) (0x0 + SHPC_SLOT_REG(s))
+
+/* Same slot state masks are used for command and status registers */
+#define SHPC_SLOT_STATE_MASK 0x03
+#define SHPC_SLOT_STATE_SHIFT \
+ (ffs(SHPC_SLOT_STATE_MASK) - 1)
+
+#define SHPC_STATE_NO 0x0
+#define SHPC_STATE_PWRONLY 0x1
+#define SHPC_STATE_ENABLED 0x2
+#define SHPC_STATE_DISABLED 0x3
+
+#define SHPC_SLOT_PWR_LED_MASK 0xC
+#define SHPC_SLOT_PWR_LED_SHIFT \
+ (ffs(SHPC_SLOT_PWR_LED_MASK) - 1)
+#define SHPC_SLOT_ATTN_LED_MASK 0x30
+#define SHPC_SLOT_ATTN_LED_SHIFT \
+ (ffs(SHPC_SLOT_ATTN_LED_MASK) - 1)
+
+#define SHPC_LED_NO 0x0
+#define SHPC_LED_ON 0x1
+#define SHPC_LED_BLINK 0x2
+#define SHPC_LED_OFF 0x3
+
+#define SHPC_SLOT_STATUS_PWR_FAULT 0x40
+#define SHPC_SLOT_STATUS_BUTTON 0x80
+#define SHPC_SLOT_STATUS_MRL_OPEN 0x100
+#define SHPC_SLOT_STATUS_66 0x200
+#define SHPC_SLOT_STATUS_PRSNT_MASK 0xC00
+#define SHPC_SLOT_STATUS_PRSNT_EMPTY 0x3
+#define SHPC_SLOT_STATUS_PRSNT_25W 0x1
+#define SHPC_SLOT_STATUS_PRSNT_15W 0x2
+#define SHPC_SLOT_STATUS_PRSNT_7_5W 0x0
+
+#define SHPC_SLOT_STATUS_PRSNT_PCIX 0x3000
+
+
+ /* 1 byte */
+#define SHPC_SLOT_EVENT_LATCH(s) (0x2 + SHPC_SLOT_REG(s))
+ /* 1 byte */
+#define SHPC_SLOT_EVENT_SERR_INT_DIS(d, s) (0x3 + SHPC_SLOT_REG(s))
+#define SHPC_SLOT_EVENT_PRESENCE 0x01
+#define SHPC_SLOT_EVENT_ISOLATED_FAULT 0x02
+#define SHPC_SLOT_EVENT_BUTTON 0x04
+#define SHPC_SLOT_EVENT_MRL 0x08
+#define SHPC_SLOT_EVENT_CONNECTED_FAULT 0x10
+/* Bits below are used for Serr/Int disable only */
+#define SHPC_SLOT_EVENT_MRL_SERR_DIS 0x20
+#define SHPC_SLOT_EVENT_CONNECTED_FAULT_SERR_DIS 0x40
+
+#define SHPC_MIN_SLOTS 1
+#define SHPC_MAX_SLOTS 31
+#define SHPC_SIZEOF(d) SHPC_SLOT_REG((d)->shpc->nslots)
+
+/* SHPC Slot identifiers */
+
+/* Hotplug supported at 31 slots out of the total 32. We reserve slot 0,
+ and give the rest of them physical *and* pci numbers starting from 1, so
+ they match logical numbers. Note: this means that multiple slots must have
+ different chassis number values, to make chassis+physical slot unique.
+ TODO: make this configurable? */
+#define SHPC_IDX_TO_LOGICAL(slot) ((slot) + 1)
+#define SHPC_LOGICAL_TO_IDX(target) ((target) - 1)
+#define SHPC_IDX_TO_PCI(slot) ((slot) + 1)
+#define SHPC_PCI_TO_IDX(pci_slot) ((pci_slot) - 1)
+#define SHPC_IDX_TO_PHYSICAL(slot) ((slot) + 1)
+
+static int roundup_pow_of_two(int x)
+{
+ x |= (x >> 1);
+ x |= (x >> 2);
+ x |= (x >> 4);
+ x |= (x >> 8);
+ x |= (x >> 16);
+ return x + 1;
+}
+
+static uint16_t shpc_get_status(SHPCDevice *shpc, int slot, uint16_t msk)
+{
+ uint8_t *status = shpc->config + SHPC_SLOT_STATUS(slot);
+ return (pci_get_word(status) & msk) >> (ffs(msk) - 1);
+}
+
+static void shpc_set_status(SHPCDevice *shpc,
+ int slot, uint8_t value, uint16_t msk)
+{
+ uint8_t *status = shpc->config + SHPC_SLOT_STATUS(slot);
+ pci_word_test_and_clear_mask(status, msk);
+ pci_word_test_and_set_mask(status, value << (ffs(msk) - 1));
+}
+
+static void shpc_interrupt_update(PCIDevice *d)
+{
+ SHPCDevice *shpc = d->shpc;
+ int slot;
+ int level = 0;
+ uint32_t serr_int;
+ uint32_t int_locator = 0;
+
+ /* Update interrupt locator register */
+ for (slot = 0; slot < shpc->nslots; ++slot) {
+ uint8_t event = shpc->config[SHPC_SLOT_EVENT_LATCH(slot)];
+ uint8_t disable = shpc->config[SHPC_SLOT_EVENT_SERR_INT_DIS(d, slot)];
+ uint32_t mask = 1 << SHPC_IDX_TO_LOGICAL(slot);
+ if (event & ~disable) {
+ int_locator |= mask;
+ }
+ }
+ serr_int = pci_get_long(shpc->config + SHPC_SERR_INT);
+ if ((serr_int & SHPC_CMD_DETECTED) && !(serr_int & SHPC_CMD_INT_DIS)) {
+ int_locator |= SHPC_INT_COMMAND;
+ }
+ pci_set_long(shpc->config + SHPC_INT_LOCATOR, int_locator);
+ level = (!(serr_int & SHPC_INT_DIS) && int_locator) ? 1 : 0;
+ if (msi_enabled(d) && shpc->msi_requested != level)
+ msi_notify(d, 0);
+ else
+ qemu_set_irq(d->irq[0], level);
+ shpc->msi_requested = level;
+}
+
+static void shpc_set_sec_bus_speed(SHPCDevice *shpc, uint8_t speed)
+{
+ switch (speed) {
+ case SHPC_SEC_BUS_33:
+ shpc->config[SHPC_SEC_BUS] &= ~SHPC_SEC_BUS_MASK;
+ shpc->config[SHPC_SEC_BUS] |= speed;
+ break;
+ default:
+ pci_word_test_and_set_mask(shpc->config + SHPC_CMD_STATUS,
+ SHPC_CMD_STATUS_INVALID_MODE);
+ }
+}
+
+void shpc_reset(PCIDevice *d)
+{
+ SHPCDevice *shpc = d->shpc;
+ int nslots = shpc->nslots;
+ int i;
+ memset(shpc->config, 0, SHPC_SIZEOF(d));
+ pci_set_byte(shpc->config + SHPC_NSLOTS, nslots);
+ pci_set_long(shpc->config + SHPC_SLOTS_33, nslots);
+ pci_set_long(shpc->config + SHPC_SLOTS_66, 0);
+ pci_set_byte(shpc->config + SHPC_FIRST_DEV, SHPC_IDX_TO_PCI(0));
+ pci_set_word(shpc->config + SHPC_PHYS_SLOT,
+ SHPC_IDX_TO_PHYSICAL(0) |
+ SHPC_PHYS_NUM_UP |
+ SHPC_PHYS_MRL |
+ SHPC_PHYS_BUTTON);
+ pci_set_long(shpc->config + SHPC_SERR_INT, SHPC_INT_DIS |
+ SHPC_SERR_DIS |
+ SHPC_CMD_INT_DIS |
+ SHPC_ARB_SERR_DIS);
+ pci_set_byte(shpc->config + SHPC_PROG_IFC, SHPC_PROG_IFC_1_0);
+ pci_set_word(shpc->config + SHPC_SEC_BUS, SHPC_SEC_BUS_33);
+ for (i = 0; i < shpc->nslots; ++i) {
+ pci_set_byte(shpc->config + SHPC_SLOT_EVENT_SERR_INT_DIS(d, i),
+ SHPC_SLOT_EVENT_PRESENCE |
+ SHPC_SLOT_EVENT_ISOLATED_FAULT |
+ SHPC_SLOT_EVENT_BUTTON |
+ SHPC_SLOT_EVENT_MRL |
+ SHPC_SLOT_EVENT_CONNECTED_FAULT |
+ SHPC_SLOT_EVENT_MRL_SERR_DIS |
+ SHPC_SLOT_EVENT_CONNECTED_FAULT_SERR_DIS);
+ if (shpc->sec_bus->devices[PCI_DEVFN(SHPC_IDX_TO_PCI(i), 0)]) {
+ shpc_set_status(shpc, i, SHPC_STATE_ENABLED, SHPC_SLOT_STATE_MASK);
+ shpc_set_status(shpc, i, 0, SHPC_SLOT_STATUS_MRL_OPEN);
+ shpc_set_status(shpc, i, SHPC_SLOT_STATUS_PRSNT_7_5W,
+ SHPC_SLOT_STATUS_PRSNT_MASK);
+ shpc_set_status(shpc, i, SHPC_LED_ON, SHPC_SLOT_PWR_LED_MASK);
+ } else {
+ shpc_set_status(shpc, i, SHPC_STATE_DISABLED, SHPC_SLOT_STATE_MASK);
+ shpc_set_status(shpc, i, 1, SHPC_SLOT_STATUS_MRL_OPEN);
+ shpc_set_status(shpc, i, SHPC_SLOT_STATUS_PRSNT_EMPTY,
+ SHPC_SLOT_STATUS_PRSNT_MASK);
+ shpc_set_status(shpc, i, SHPC_LED_OFF, SHPC_SLOT_PWR_LED_MASK);
+ }
+ shpc_set_status(shpc, i, 0, SHPC_SLOT_STATUS_66);
+ }
+ shpc_set_sec_bus_speed(shpc, SHPC_SEC_BUS_33);
+ shpc->msi_requested = 0;
+ shpc_interrupt_update(d);
+}
+
+static void shpc_invalid_command(SHPCDevice *shpc)
+{
+ pci_word_test_and_set_mask(shpc->config + SHPC_CMD_STATUS,
+ SHPC_CMD_STATUS_INVALID_CMD);
+}
+
+static void shpc_free_devices_in_slot(SHPCDevice *shpc, int slot)
+{
+ int devfn;
+ int pci_slot = SHPC_IDX_TO_PCI(slot);
+ for (devfn = PCI_DEVFN(pci_slot, 0);
+ devfn <= PCI_DEVFN(pci_slot, PCI_FUNC_MAX - 1);
+ ++devfn) {
+ PCIDevice *affected_dev = shpc->sec_bus->devices[devfn];
+ if (affected_dev) {
+ qdev_free(&affected_dev->qdev);
+ }
+ }
+}
+
+static void shpc_slot_command(SHPCDevice *shpc, uint8_t target,
+ uint8_t state, uint8_t power, uint8_t attn)
+{
+ uint8_t current_state;
+ int slot = SHPC_LOGICAL_TO_IDX(target);
+ if (target < SHPC_CMD_TRGT_MIN || slot >= shpc->nslots) {
+ shpc_invalid_command(shpc);
+ return;
+ }
+ current_state = shpc_get_status(shpc, slot, SHPC_SLOT_STATE_MASK);
+ if (current_state == SHPC_STATE_ENABLED && state == SHPC_STATE_PWRONLY) {
+ shpc_invalid_command(shpc);
+ return;
+ }
+
+ switch (power) {
+ case SHPC_LED_NO:
+ break;
+ default:
+ /* TODO: send event to monitor */
+ shpc_set_status(shpc, slot, power, SHPC_SLOT_PWR_LED_MASK);
+ }
+ switch (attn) {
+ case SHPC_LED_NO:
+ break;
+ default:
+ /* TODO: send event to monitor */
+ shpc_set_status(shpc, slot, attn, SHPC_SLOT_ATTN_LED_MASK);
+ }
+
+ if ((current_state == SHPC_STATE_DISABLED && state == SHPC_STATE_PWRONLY) ||
+ (current_state == SHPC_STATE_DISABLED && state == SHPC_STATE_ENABLED)) {
+ shpc_set_status(shpc, slot, state, SHPC_SLOT_STATE_MASK);
+ } else if ((current_state == SHPC_STATE_ENABLED ||
+ current_state == SHPC_STATE_PWRONLY) &&
+ state == SHPC_STATE_DISABLED) {
+ shpc_set_status(shpc, slot, state, SHPC_SLOT_STATE_MASK);
+ power = shpc_get_status(shpc, slot, SHPC_SLOT_PWR_LED_MASK);
+ /* TODO: track what monitor requested. */
+ /* Look at LED to figure out whether it's ok to remove the device. */
+ if (power == SHPC_LED_OFF) {
+ shpc_free_devices_in_slot(shpc, slot);
+ shpc_set_status(shpc, slot, 1, SHPC_SLOT_STATUS_MRL_OPEN);
+ shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_EMPTY,
+ SHPC_SLOT_STATUS_PRSNT_MASK);
+ shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
+ SHPC_SLOT_EVENT_BUTTON |
+ SHPC_SLOT_EVENT_MRL |
+ SHPC_SLOT_EVENT_PRESENCE;
+ }
+ }
+}
+
+static void shpc_command(SHPCDevice *shpc)
+{
+ uint8_t code = pci_get_byte(shpc->config + SHPC_CMD_CODE);
+ uint8_t speed;
+ uint8_t target;
+ uint8_t attn;
+ uint8_t power;
+ uint8_t state;
+ int i;
+
+ /* Clear status from the previous command. */
+ pci_word_test_and_clear_mask(shpc->config + SHPC_CMD_STATUS,
+ SHPC_CMD_STATUS_BUSY |
+ SHPC_CMD_STATUS_MRL_OPEN |
+ SHPC_CMD_STATUS_INVALID_CMD |
+ SHPC_CMD_STATUS_INVALID_MODE);
+ switch (code) {
+ case 0x00 ... 0x3f:
+ target = shpc->config[SHPC_CMD_TRGT] & SHPC_CMD_TRGT_MAX;
+ state = (code & SHPC_SLOT_STATE_MASK) >> SHPC_SLOT_STATE_SHIFT;
+ power = (code & SHPC_SLOT_PWR_LED_MASK) >> SHPC_SLOT_PWR_LED_SHIFT;
+ attn = (code & SHPC_SLOT_ATTN_LED_MASK) >> SHPC_SLOT_ATTN_LED_SHIFT;
+ shpc_slot_command(shpc, target, state, power, attn);
+ break;
+ case 0x40 ... 0x47:
+ speed = code & SHPC_SEC_BUS_MASK;
+ shpc_set_sec_bus_speed(shpc, speed);
+ break;
+ case 0x48:
+ /* Power only all slots */
+ /* first verify no slots are enabled */
+ for (i = 0; i < shpc->nslots; ++i) {
+ state = shpc_get_status(shpc, i, SHPC_SLOT_STATE_MASK);
+ if (state == SHPC_STATE_ENABLED) {
+ shpc_invalid_command(shpc);
+ goto done;
+ }
+ }
+ for (i = 0; i < shpc->nslots; ++i) {
+ if (!(shpc_get_status(shpc, i, SHPC_SLOT_STATUS_MRL_OPEN))) {
+ shpc_slot_command(shpc, i + SHPC_CMD_TRGT_MIN,
+ SHPC_STATE_PWRONLY, SHPC_LED_ON, SHPC_LED_NO);
+ } else {
+ shpc_slot_command(shpc, i + SHPC_CMD_TRGT_MIN,
+ SHPC_STATE_NO, SHPC_LED_OFF, SHPC_LED_NO);
+ }
+ }
+ break;
+ case 0x49:
+ /* Enable all slots */
+ /* TODO: Spec says this shall fail if some are already enabled.
+ * This doesn't make sense - why not? a spec bug? */
+ for (i = 0; i < shpc->nslots; ++i) {
+ state = shpc_get_status(shpc, i, SHPC_SLOT_STATE_MASK);
+ if (state == SHPC_STATE_ENABLED) {
+ shpc_invalid_command(shpc);
+ goto done;
+ }
+ }
+ for (i = 0; i < shpc->nslots; ++i) {
+ if (!(shpc_get_status(shpc, i, SHPC_SLOT_STATUS_MRL_OPEN))) {
+ shpc_slot_command(shpc, i + SHPC_CMD_TRGT_MIN,
+ SHPC_STATE_ENABLED, SHPC_LED_ON, SHPC_LED_NO);
+ } else {
+ shpc_slot_command(shpc, i + SHPC_CMD_TRGT_MIN,
+ SHPC_STATE_NO, SHPC_LED_OFF, SHPC_LED_NO);
+ }
+ }
+ break;
+ default:
+ shpc_invalid_command(shpc);
+ break;
+ }
+done:
+ pci_long_test_and_set_mask(shpc->config + SHPC_SERR_INT, SHPC_CMD_DETECTED);
+}
+
+static void shpc_write(PCIDevice *d, unsigned addr, uint64_t val, int l)
+{
+ SHPCDevice *shpc = d->shpc;
+ int i;
+ if (addr >= SHPC_SIZEOF(d)) {
+ return;
+ }
+ l = MIN(l, SHPC_SIZEOF(d) - addr);
+
+ /* TODO: code duplicated from pci.c */
+ for (i = 0; i < l; val >>= 8, ++i) {
+ unsigned a = addr + i;
+ uint8_t wmask = shpc->wmask[a];
+ uint8_t w1cmask = shpc->w1cmask[a];
+ assert(!(wmask & w1cmask));
+ shpc->config[a] = (shpc->config[a] & ~wmask) | (val & wmask);
+ shpc->config[a] &= ~(val & w1cmask); /* W1C: Write 1 to Clear */
+ }
+ if (ranges_overlap(addr, l, SHPC_CMD_CODE, 2)) {
+ shpc_command(shpc);
+ }
+ shpc_interrupt_update(d);
+}
+
+static uint64_t shpc_read(PCIDevice *d, unsigned addr, int l)
+{
+ uint64_t val = 0x0;
+ if (addr >= SHPC_SIZEOF(d)) {
+ return val;
+ }
+ l = MIN(l, SHPC_SIZEOF(d) - addr);
+ memcpy(&val, d->shpc->config + addr, l);
+ return val;
+}
+
+/* SHPC Bridge Capability */
+#define SHPC_CAP_LENGTH 0x08
+#define SHPC_CAP_DWORD_SELECT 0x2 /* 1 byte */
+#define SHPC_CAP_CxP 0x3 /* 1 byte: CSP, CIP */
+#define SHPC_CAP_DWORD_DATA 0x4 /* 4 bytes */
+#define SHPC_CAP_CSP_MASK 0x4
+#define SHPC_CAP_CIP_MASK 0x8
+
+static uint8_t shpc_cap_dword(PCIDevice *d)
+{
+ return pci_get_byte(d->config + d->shpc->cap + SHPC_CAP_DWORD_SELECT);
+}
+
+/* Update dword data capability register */
+static void shpc_cap_update_dword(PCIDevice *d)
+{
+ unsigned data;
+ data = shpc_read(d, shpc_cap_dword(d) * 4, 4);
+ pci_set_long(d->config + d->shpc->cap + SHPC_CAP_DWORD_DATA, data);
+}
+
+/* Add SHPC capability to the config space for the device. */
+static int shpc_cap_add_config(PCIDevice *d)
+{
+ uint8_t *config;
+ int config_offset;
+ config_offset = pci_add_capability(d, PCI_CAP_ID_SHPC,
+ 0, SHPC_CAP_LENGTH);
+ if (config_offset < 0) {
+ return config_offset;
+ }
+ config = d->config + config_offset;
+
+ pci_set_byte(config + SHPC_CAP_DWORD_SELECT, 0);
+ pci_set_byte(config + SHPC_CAP_CxP, 0);
+ pci_set_long(config + SHPC_CAP_DWORD_DATA, 0);
+ d->shpc->cap = config_offset;
+ /* Make dword select and data writeable. */
+ pci_set_byte(d->wmask + config_offset + SHPC_CAP_DWORD_SELECT, 0xff);
+ pci_set_long(d->wmask + config_offset + SHPC_CAP_DWORD_DATA, 0xffffffff);
+ return 0;
+}
+
+static uint64_t shpc_mmio_read(void *opaque, target_phys_addr_t addr,
+ unsigned size)
+{
+ return shpc_read(opaque, addr, size);
+}
+
+static void shpc_mmio_write(void *opaque, target_phys_addr_t addr,
+ uint64_t val, unsigned size)
+{
+ shpc_write(opaque, addr, val, size);
+}
+
+static const MemoryRegionOps shpc_mmio_ops = {
+ .read = shpc_mmio_read,
+ .write = shpc_mmio_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ /* SHPC ECN requires dword accesses, but the original 1.0 spec doesn't.
+ * It's easier to suppport all sizes than worry about it. */
+ .min_access_size = 1,
+ .max_access_size = 4,
+ },
+};
+
+static int shpc_device_hotplug(DeviceState *qdev, PCIDevice *affected_dev,
+ PCIHotplugState hotplug_state)
+{
+ int pci_slot = PCI_SLOT(affected_dev->devfn);
+ uint8_t state;
+ uint8_t led;
+ PCIDevice *d = DO_UPCAST(PCIDevice, qdev, qdev);
+ SHPCDevice *shpc = d->shpc;
+ int slot = SHPC_PCI_TO_IDX(pci_slot);
+ if (pci_slot < SHPC_IDX_TO_PCI(0) || slot >= shpc->nslots) {
+ error_report("Unsupported PCI slot %d for standard hotplug "
+ "controller. Valid slots are between %d and %d.",
+ pci_slot, SHPC_IDX_TO_PCI(0),
+ SHPC_IDX_TO_PCI(shpc->nslots) - 1);
+ return -1;
+ }
+ /* Don't send event when device is enabled during qemu machine creation:
+ * it is present on boot, no hotplug event is necessary. We do send an
+ * event when the device is disabled later. */
+ if (hotplug_state == PCI_COLDPLUG_ENABLED) {
+ shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_MRL_OPEN);
+ shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_7_5W,
+ SHPC_SLOT_STATUS_PRSNT_MASK);
+ return 0;
+ }
+ if (hotplug_state == PCI_HOTPLUG_DISABLED) {
+ shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |= SHPC_SLOT_EVENT_BUTTON;
+ state = shpc_get_status(shpc, slot, SHPC_SLOT_STATE_MASK);
+ led = shpc_get_status(shpc, slot, SHPC_SLOT_PWR_LED_MASK);
+ if (state == SHPC_STATE_DISABLED && led == SHPC_LED_OFF) {
+ shpc_free_devices_in_slot(shpc, slot);
+ shpc_set_status(shpc, slot, 1, SHPC_SLOT_STATUS_MRL_OPEN);
+ shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_EMPTY,
+ SHPC_SLOT_STATUS_PRSNT_MASK);
+ shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
+ SHPC_SLOT_EVENT_MRL |
+ SHPC_SLOT_EVENT_PRESENCE;
+ }
+ } else {
+ /* This could be a cancellation of the previous removal.
+ * We check MRL state to figure out. */
+ if (shpc_get_status(shpc, slot, SHPC_SLOT_STATUS_MRL_OPEN)) {
+ shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_MRL_OPEN);
+ shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_7_5W,
+ SHPC_SLOT_STATUS_PRSNT_MASK);
+ shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
+ SHPC_SLOT_EVENT_BUTTON |
+ SHPC_SLOT_EVENT_MRL |
+ SHPC_SLOT_EVENT_PRESENCE;
+ } else {
+ /* Press attention button to cancel removal */
+ shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
+ SHPC_SLOT_EVENT_BUTTON;
+ }
+ }
+ shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_66);
+ shpc_interrupt_update(d);
+ return 0;
+}
+
+/* Initialize the SHPC structure in bridge's BAR. */
+int shpc_init(PCIDevice *d, PCIBus *sec_bus, MemoryRegion *bar, unsigned offset)
+{
+ int i, ret;
+ int nslots = SHPC_MAX_SLOTS; /* TODO: qdev property? */
+ SHPCDevice *shpc = d->shpc = g_malloc0(sizeof(*d->shpc));
+ shpc->sec_bus = sec_bus;
+ ret = shpc_cap_add_config(d);
+ if (ret) {
+ g_free(d->shpc);
+ return ret;
+ }
+ if (nslots < SHPC_MIN_SLOTS) {
+ return 0;
+ }
+ if (nslots > SHPC_MAX_SLOTS ||
+ SHPC_IDX_TO_PCI(nslots) > PCI_SLOT_MAX) {
+ /* TODO: report an error mesage that makes sense. */
+ return -EINVAL;
+ }
+ shpc->nslots = nslots;
+ shpc->config = g_malloc0(SHPC_SIZEOF(d));
+ shpc->cmask = g_malloc0(SHPC_SIZEOF(d));
+ shpc->wmask = g_malloc0(SHPC_SIZEOF(d));
+ shpc->w1cmask = g_malloc0(SHPC_SIZEOF(d));
+
+ shpc_reset(d);
+
+ pci_set_long(shpc->config + SHPC_BASE_OFFSET, offset);
+
+ pci_set_byte(shpc->wmask + SHPC_CMD_CODE, 0xff);
+ pci_set_byte(shpc->wmask + SHPC_CMD_TRGT, SHPC_CMD_TRGT_MAX);
+ pci_set_byte(shpc->wmask + SHPC_CMD_TRGT, SHPC_CMD_TRGT_MAX);
+ pci_set_long(shpc->wmask + SHPC_SERR_INT,
+ SHPC_INT_DIS |
+ SHPC_SERR_DIS |
+ SHPC_CMD_INT_DIS |
+ SHPC_ARB_SERR_DIS);
+ pci_set_long(shpc->w1cmask + SHPC_SERR_INT,
+ SHPC_CMD_DETECTED |
+ SHPC_ARB_DETECTED);
+ for (i = 0; i < nslots; ++i) {
+ pci_set_byte(shpc->wmask +
+ SHPC_SLOT_EVENT_SERR_INT_DIS(d, i),
+ SHPC_SLOT_EVENT_PRESENCE |
+ SHPC_SLOT_EVENT_ISOLATED_FAULT |
+ SHPC_SLOT_EVENT_BUTTON |
+ SHPC_SLOT_EVENT_MRL |
+ SHPC_SLOT_EVENT_CONNECTED_FAULT |
+ SHPC_SLOT_EVENT_MRL_SERR_DIS |
+ SHPC_SLOT_EVENT_CONNECTED_FAULT_SERR_DIS);
+ pci_set_byte(shpc->w1cmask +
+ SHPC_SLOT_EVENT_LATCH(i),
+ SHPC_SLOT_EVENT_PRESENCE |
+ SHPC_SLOT_EVENT_ISOLATED_FAULT |
+ SHPC_SLOT_EVENT_BUTTON |
+ SHPC_SLOT_EVENT_MRL |
+ SHPC_SLOT_EVENT_CONNECTED_FAULT);
+ }
+
+ /* TODO: init cmask */
+ memory_region_init_io(&shpc->mmio, &shpc_mmio_ops, d, "shpc-mmio",
+ SHPC_SIZEOF(d));
+ shpc_cap_update_dword(d);
+ memory_region_add_subregion(bar, offset, &shpc->mmio);
+ pci_bus_hotplug(sec_bus, shpc_device_hotplug, &d->qdev);
+
+ d->cap_present |= QEMU_PCI_CAP_SHPC;
+ return 0;
+}
+
+int shpc_bar_size(PCIDevice *d)
+{
+ return roundup_pow_of_two(SHPC_SLOT_REG(SHPC_MAX_SLOTS));
+}
+
+void shpc_cleanup(PCIDevice *d, MemoryRegion *bar)
+{
+ SHPCDevice *shpc = d->shpc;
+ d->cap_present &= ~QEMU_PCI_CAP_SHPC;
+ memory_region_del_subregion(bar, &shpc->mmio);
+ /* TODO: cleanup config space changes? */
+ g_free(shpc->config);
+ g_free(shpc->cmask);
+ g_free(shpc->wmask);
+ g_free(shpc->w1cmask);
+ memory_region_destroy(&shpc->mmio);
+ g_free(shpc);
+}
+
+void shpc_cap_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int l)
+{
+ if (!ranges_overlap(addr, l, d->shpc->cap, SHPC_CAP_LENGTH)) {
+ return;
+ }
+ if (ranges_overlap(addr, l, d->shpc->cap + SHPC_CAP_DWORD_DATA, 4)) {
+ unsigned dword_data;
+ dword_data = pci_get_long(d->shpc->config + d->shpc->cap
+ + SHPC_CAP_DWORD_DATA);
+ shpc_write(d, shpc_cap_dword(d) * 4, dword_data, 4);
+ }
+ /* Update cap dword data in case guest is going to read it. */
+ shpc_cap_update_dword(d);
+}
+
+static void shpc_save(QEMUFile *f, void *pv, size_t size)
+{
+ PCIDevice *d = container_of(pv, PCIDevice, shpc);
+ qemu_put_buffer(f, d->shpc->config, SHPC_SIZEOF(d));
+}
+
+static int shpc_load(QEMUFile *f, void *pv, size_t size)
+{
+ PCIDevice *d = container_of(pv, PCIDevice, shpc);
+ int ret = qemu_get_buffer(f, d->shpc->config, SHPC_SIZEOF(d));
+ if (ret != SHPC_SIZEOF(d)) {
+ return -EINVAL;
+ }
+ /* Make sure we don't lose notifications. An extra interrupt is harmless. */
+ d->shpc->msi_requested = 0;
+ shpc_interrupt_update(d);
+ return 0;
+}
+
+VMStateInfo shpc_vmstate_info = {
+ .name = "shpc",
+ .get = shpc_load,
+ .put = shpc_save,
+};
diff --git a/hw/shpc.h b/hw/shpc.h
new file mode 100644
index 0000000000..130b71df30
--- /dev/null
+++ b/hw/shpc.h
@@ -0,0 +1,48 @@
+#ifndef SHPC_H
+#define SHPC_H
+
+#include "qemu-common.h"
+#include "memory.h"
+#include "vmstate.h"
+
+struct SHPCDevice {
+ /* Capability offset in device's config space */
+ int cap;
+
+ /* # of hot-pluggable slots */
+ int nslots;
+
+ /* SHPC WRS: working register set */
+ uint8_t *config;
+
+ /* Used to enable checks on load. Note that writable bits are
+ * never checked even if set in cmask. */
+ uint8_t *cmask;
+
+ /* Used to implement R/W bytes */
+ uint8_t *wmask;
+
+ /* Used to implement RW1C(Write 1 to Clear) bytes */
+ uint8_t *w1cmask;
+
+ /* MMIO for the SHPC BAR */
+ MemoryRegion mmio;
+
+ /* Bus controlled by this SHPC */
+ PCIBus *sec_bus;
+
+ /* MSI already requested for this event */
+ int msi_requested;
+};
+
+void shpc_reset(PCIDevice *d);
+int shpc_bar_size(PCIDevice *dev);
+int shpc_init(PCIDevice *dev, PCIBus *sec_bus, MemoryRegion *bar, unsigned off);
+void shpc_cleanup(PCIDevice *dev, MemoryRegion *bar);
+void shpc_cap_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int len);
+
+extern VMStateInfo shpc_vmstate_info;
+#define SHPC_VMSTATE(_field, _type) \
+ VMSTATE_BUFFER_UNSAFE_INFO(_field, _type, 0, shpc_vmstate_info, 0)
+
+#endif
diff --git a/hw/slotid_cap.c b/hw/slotid_cap.c
new file mode 100644
index 0000000000..01064521a9
--- /dev/null
+++ b/hw/slotid_cap.c
@@ -0,0 +1,44 @@
+#include "slotid_cap.h"
+#include "pci.h"
+
+#define SLOTID_CAP_LENGTH 4
+#define SLOTID_NSLOTS_SHIFT (ffs(PCI_SID_ESR_NSLOTS) - 1)
+
+int slotid_cap_init(PCIDevice *d, int nslots,
+ uint8_t chassis,
+ unsigned offset)
+{
+ int cap;
+ if (!chassis) {
+ error_report("Bridge chassis not specified. Each bridge is required "
+ "to be assigned a unique chassis id > 0.");
+ return -EINVAL;
+ }
+ if (nslots < 0 || nslots > (PCI_SID_ESR_NSLOTS >> SLOTID_NSLOTS_SHIFT)) {
+ /* TODO: error report? */
+ return -EINVAL;
+ }
+
+ cap = pci_add_capability(d, PCI_CAP_ID_SLOTID, offset, SLOTID_CAP_LENGTH);
+ if (cap < 0) {
+ return cap;
+ }
+ /* We make each chassis unique, this way each bridge is First in Chassis */
+ d->config[cap + PCI_SID_ESR] = PCI_SID_ESR_FIC |
+ (nslots << SLOTID_NSLOTS_SHIFT);
+ d->cmask[cap + PCI_SID_ESR] = 0xff;
+ d->config[cap + PCI_SID_CHASSIS_NR] = chassis;
+ /* Note: Chassis number register is non-volatile,
+ so we don't reset it. */
+ /* TODO: store in eeprom? */
+ d->wmask[cap + PCI_SID_CHASSIS_NR] = 0xff;
+
+ d->cap_present |= QEMU_PCI_CAP_SLOTID;
+ return 0;
+}
+
+void slotid_cap_cleanup(PCIDevice *d)
+{
+ /* TODO: cleanup config space? */
+ d->cap_present &= ~QEMU_PCI_CAP_SLOTID;
+}
diff --git a/hw/slotid_cap.h b/hw/slotid_cap.h
new file mode 100644
index 0000000000..70db0470b0
--- /dev/null
+++ b/hw/slotid_cap.h
@@ -0,0 +1,11 @@
+#ifndef PCI_SLOTID_CAP_H
+#define PCI_SLOTID_CAP_H
+
+#include "qemu-common.h"
+
+int slotid_cap_init(PCIDevice *dev, int nslots,
+ uint8_t chassis,
+ unsigned offset);
+void slotid_cap_cleanup(PCIDevice *dev);
+
+#endif
diff --git a/hw/virtio-net.h b/hw/virtio-net.h
index 44687414c9..36aa463812 100644
--- a/hw/virtio-net.h
+++ b/hw/virtio-net.h
@@ -79,6 +79,7 @@ struct virtio_net_config
struct virtio_net_hdr
{
#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset
+#define VIRTIO_NET_HDR_F_DATA_VALID 2 // Csum is valid
uint8_t flags;
#define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame
#define VIRTIO_NET_HDR_GSO_TCPV4 1 // GSO frame, IPv4 TCP (TSO)
diff --git a/net.c b/net.c
index c34474fe5f..1922d8abd1 100644
--- a/net.c
+++ b/net.c
@@ -1475,3 +1475,26 @@ int net_client_parse(QemuOptsList *opts_list, const char *optarg)
default_net = 0;
return 0;
}
+
+/* From FreeBSD */
+/* XXX: optimize */
+unsigned compute_mcast_idx(const uint8_t *ep)
+{
+ uint32_t crc;
+ int carry, i, j;
+ uint8_t b;
+
+ crc = 0xffffffff;
+ for (i = 0; i < 6; i++) {
+ b = *ep++;
+ for (j = 0; j < 8; j++) {
+ carry = ((crc & 0x80000000L) ? 1 : 0) ^ (b & 0x01);
+ crc <<= 1;
+ b >>= 1;
+ if (carry) {
+ crc = ((crc ^ POLYNOMIAL) | carry);
+ }
+ }
+ }
+ return crc >> 26;
+}
diff --git a/net.h b/net.h
index 75a8c155e5..64993b43ef 100644
--- a/net.h
+++ b/net.h
@@ -182,6 +182,9 @@ void qdev_set_nic_properties(DeviceState *dev, NICInfo *nd);
int net_handle_fd_param(Monitor *mon, const char *param);
+#define POLYNOMIAL 0x04c11db6
+unsigned compute_mcast_idx(const uint8_t *ep);
+
#define vmstate_offset_macaddr(_state, _field) \
vmstate_offset_array(_state, _field.a, uint8_t, \
sizeof(typeof_field(_state, _field)))
diff --git a/qemu-common.h b/qemu-common.h
index 4647dd96e9..50f659af07 100644
--- a/qemu-common.h
+++ b/qemu-common.h
@@ -258,6 +258,7 @@ typedef struct SSIBus SSIBus;
typedef struct EventNotifier EventNotifier;
typedef struct VirtIODevice VirtIODevice;
typedef struct QEMUSGList QEMUSGList;
+typedef struct SHPCDevice SHPCDevice;
typedef uint64_t pcibus_t;