AddressBookPage Right-click to edit address or label 右鍵點一下來修改位址或標記 Create a new address 產生一個新位址 &New 新增(&N) Copy the currently selected address to the system clipboard 複製目前選擇的位址到系統剪貼簿 &Copy 複製(&C) C&lose 關閉(&L) Delete the currently selected address from the list 把目前選擇的位址從列表中刪掉 Enter address or label to search 請輸入要搜尋的位址或標記 Export the data in the current tab to a file 把目前分頁的資料匯出存成檔案 &Export 匯出(&E) &Delete 刪掉(&D) Choose the address to send coins to 選擇要付錢過去的位址 Choose the address to receive coins with 選擇要收錢進來的位址 C&hoose 選取(&H) Sending addresses 付款位址 Receiving addresses 收款位址 These are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins. 這些是你要付款過去的 Bitcoin 位址。在付錢之前,務必要檢查金額和收款位址是否正確。 These are your Bitcoin addresses for receiving payments. Use the 'Create new receiving address' button in the receive tab to create new addresses. 這些是您用於接收付款的比特幣位址。 使用接收分頁中的"生成新接收位址"按鈕創建新的位置。 &Copy Address 複製位址(&C) Copy &Label 複製標記(&L) &Edit 編輯(&E) Export Address List 匯出位址清單 Comma separated file (*.csv) 逗點分隔資料檔(*.csv) Exporting Failed 匯出失敗 There was an error trying to save the address list to %1. Please try again. 儲存位址列表到 %1 時發生錯誤。請重試一次。 AddressTableModel Label 標記 Address 位址 (no label) (無標記) AskPassphraseDialog Passphrase Dialog 密碼對話視窗 Enter passphrase 請輸入密碼 New passphrase 新密碼 Repeat new passphrase 重複新密碼 Encrypt wallet 加密錢包 This operation needs your wallet passphrase to unlock the wallet. 這個動作需要你的錢包密碼來解鎖錢包。 Unlock wallet 解鎖錢包 This operation needs your wallet passphrase to decrypt the wallet. 這個動作需要你的錢包密碼來把錢包解密。 Decrypt wallet 解密錢包 Change passphrase 改變密碼 Confirm wallet encryption 確認錢包加密 Warning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR BITCOINS</b>! 警告: 如果把錢包加密後又忘記密碼,你就會從此<b>失去其中所有的 Bitcoin 了</b>! Are you sure you wish to encrypt your wallet? 你確定要把錢包加密嗎? Wallet encrypted 錢包已加密 Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer. 請記得, 即使將錢包加密, 也不能完全防止因惡意軟體入侵, 而導致位元幣被偷. IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet. 重要須知: 請改用新造出來、有加密的錢包檔,來取代舊錢包檔的備份。為了安全起見,當你開始使用新的有加密的錢包後,舊錢包檔的備份就沒有用了。 Wallet encryption failed 錢包加密失敗 Wallet encryption failed due to an internal error. Your wallet was not encrypted. 因為內部錯誤導致錢包加密失敗。你的錢包還是沒加密。 The supplied passphrases do not match. 提供的密碼不一樣。 Wallet unlock failed 錢包解鎖失敗 The passphrase entered for the wallet decryption was incorrect. 輸入要用來解密錢包的密碼不對。 Wallet decryption failed 錢包解密失敗 Wallet passphrase was successfully changed. 錢包密碼改成功了。 Warning: The Caps Lock key is on! 警告: 大寫字母鎖定作用中! BanTableModel IP/Netmask 網路位址/遮罩 Banned Until 禁止期限 BitcoinGUI Sign &message... 簽署訊息(&M)... Synchronizing with network... 正在跟網路進行同步... &Overview 總覽(&O) Show general overview of wallet 顯示錢包一般總覽 &Transactions 交易(&T) Browse transaction history 瀏覽交易紀錄 E&xit 結束(&X) Quit application 結束應用程式 &About %1 關於%1(&A) Show information about %1 顯示 %1 的相關資訊 About &Qt 關於 &Qt Show information about Qt 顯示 Qt 相關資訊 &Options... 選項(&O)... Modify configuration options for %1 修改 %1 的設定選項 &Encrypt Wallet... 加密錢包(&E)... &Backup Wallet... 備份錢包(&B)... &Change Passphrase... 改變密碼(&C)... Open &URI... 開啓 &URI... Wallet: 錢包: Click to disable network activity. 按一下就會不使用網路。 Network activity disabled. 網路活動關閉了。 Click to enable network activity again. 按一下就又會使用網路。 Syncing Headers (%1%)... 正在同步前導資料(%1%)中... Reindexing blocks on disk... 正在為磁碟裡的區塊重建索引... Proxy is <b>enabled</b>: %1 代理伺服器<b>已經啟用</b>: %1 Send coins to a Bitcoin address 付錢給一個 Bitcoin 位址 Backup wallet to another location 把錢包備份到其它地方 Change the passphrase used for wallet encryption 改變錢包加密用的密碼 &Debug window 除錯視窗(&D) Open debugging and diagnostic console 開啓除錯和診斷主控台 &Verify message... 驗證訊息(&V)... &Send 付款(&S) &Receive 收款(&R) &Show / Hide 顯示或隱藏(&S) Show or hide the main Window 顯示或隱藏主視窗 Encrypt the private keys that belong to your wallet 把錢包中的密鑰加密 Sign messages with your Bitcoin addresses to prove you own them 用 Bitcoin 位址簽署訊息來證明位址是你的 Verify messages to ensure they were signed with specified Bitcoin addresses 驗證訊息是用來確定訊息是用指定的 Bitcoin 位址簽署的 &File 檔案(&F) &Settings 設定(&S) &Help 說明(&H) Tabs toolbar 分頁工具列 Request payments (generates QR codes and bitcoin: URIs) 要求付款(產生 QR Code 和 bitcoin 付款協議的資源識別碼: URI) Show the list of used sending addresses and labels 顯示已使用過的付款位址和標記的清單 Show the list of used receiving addresses and labels 顯示已使用過的收款位址和標記的清單 Open a bitcoin: URI or payment request 開啓 bitcoin 協議的資源識別碼(URI)或付款要求 &Command-line options 命令列選項(&C) %n active connection(s) to Bitcoin network %n 個運作中的 Bitcoin 網路連線 Indexing blocks on disk... 正在為磁碟裡的區塊建立索引... Processing blocks on disk... 正在處理磁碟裡的區塊資料... Processed %n block(s) of transaction history. 已經處理了 %n 個區塊的交易紀錄。 %1 behind 落後 %1 Last received block was generated %1 ago. 最近收到的區塊是在 %1 以前生出來的。 Transactions after this will not yet be visible. 暫時會看不到在這之後的交易。 Error 錯誤 Warning 警告 Information 資訊 Up to date 最新狀態 &Sending addresses 付款位址(&S) &Receiving addresses 收款位址(&R) Open Wallet 打開錢包 Open a wallet 打開一個錢包檔 Close Wallet... 關上錢包... Close wallet 關上錢包 Show the %1 help message to get a list with possible Bitcoin command-line options 顯示 %1 的說明訊息,來取得可用命令列選項的列表 default wallet 預設錢包 No wallets available 没有可用的钱包 &Window 視窗(&W) Minimize 縮小 Zoom 缩放 Main Window 主窗口 %1 client %1 客戶端軟體 Connecting to peers... 正在跟其他節點連線中... Catching up... 正在趕進度... Error: %1 错误:%1 Warning: %1 警告:%1 Date: %1 日期: %1 Amount: %1 金額: %1 Wallet: %1 錢包: %1 Type: %1 種類: %1 Label: %1 標記: %1 Address: %1 位址: %1 Sent transaction 付款交易 Incoming transaction 收款交易 HD key generation is <b>enabled</b> 產生 HD 金鑰<b>已經啟用</b> HD key generation is <b>disabled</b> 產生 HD 金鑰<b>已經停用</b> Private key <b>disabled</b> 私钥<b>禁用</b> Wallet is <b>encrypted</b> and currently <b>unlocked</b> 錢包<b>已加密</b>並且<b>解鎖中</b> Wallet is <b>encrypted</b> and currently <b>locked</b> 錢包<b>已加密</b>並且<b>上鎖中</b> A fatal error occurred. Bitcoin can no longer continue safely and will quit. 發生了致命的錯誤。Bitcoin 軟體沒辦法再繼續安全執行,只好結束。 CoinControlDialog Coin Selection 選擇錢幣 Quantity: 數目: Bytes: 位元組數: Amount: 金額: Fee: 手續費: Dust: 零散錢: After Fee: 計費後金額: Change: 找零金額: (un)select all 全選或全不選 Tree mode 樹狀模式 List mode 列表模式 Amount 金額 Received with label 收款標記 Received with address 收款位址 Date 日期 Confirmations 確認次數 Confirmed 已確認 Copy address 複製位址 Copy label 複製標記 Copy amount 複製金額 Copy transaction ID 複製交易識別碼 Lock unspent 鎖定不用 Unlock unspent 解鎖可用 Copy quantity 複製數目 Copy fee 複製手續費 Copy after fee 複製計費後金額 Copy bytes 複製位元組數 Copy dust 複製零散金額 Copy change 複製找零金額 (%1 locked) (鎖定 %1 枚) yes no This label turns red if any recipient receives an amount smaller than the current dust threshold. 當任何一個收款金額小於目前的零散金額上限時,文字會變紅色。 Can vary +/- %1 satoshi(s) per input. 每組輸入可能有 +/- %1 個 satoshi 的誤差。 (no label) (無標記) change from %1 (%2) 找零前是 %1 (%2) (change) (找零) CreateWalletActivity CreateWalletDialog EditAddressDialog Edit Address 編輯位址 &Label 標記(&L) The label associated with this address list entry 跟這個位址簿項目關聯的標記 The address associated with this address list entry. This can only be modified for sending addresses. 跟這個位址簿項目關聯的位址。只有付款位址能被修改。 &Address 位址(&A) New sending address 造新的付款位址 Edit receiving address 編輯收款位址 Edit sending address 編輯付款位址 The entered address "%1" is not a valid Bitcoin address. 輸入的位址 %1 並不是有效的 Bitcoin 位址。 Address "%1" already exists as a receiving address with label "%2" and so cannot be added as a sending address. %1 已經是標記為 %2 的收款位址了,不可以又是付款位址。 The entered address "%1" is already in the address book with label "%2". 輸入的位址 %1 本來就在位址簿中了,標記為 %2。 Could not unlock wallet. 沒辦法把錢包解鎖。 New key generation failed. 產生新的密鑰失敗了。 FreespaceChecker A new data directory will be created. 就要產生新的資料目錄。 name 名稱 Directory already exists. Add %1 if you intend to create a new directory here. 已經有這個目錄了。如果你要在裡面造出新的目錄的話,請加上 %1. Path already exists, and is not a directory. 已經有指定的路徑了,並且不是一個目錄。 Cannot create data directory here. 沒辦法在這裡造出資料目錄。 HelpMessageDialog version 版本 (%1-bit) (%1 位元) About %1 關於 %1 Command-line options 命令列選項 Intro Welcome 歡迎 Welcome to %1. 歡迎使用 %1。 As this is the first time the program is launched, you can choose where %1 will store its data. 因為這是程式第一次啓動,你可以選擇 %1 儲存資料的地方。 When you click OK, %1 will begin to download and process the full %4 block chain (%2GB) starting with the earliest transactions in %3 when %4 initially launched. 在你按下「好」之後,%1 就會開始下載並處理整個 %4 區塊鏈(大小是 %2GB),也就是從 %3 年 %4 剛剛起步時的最初交易開始。 This initial synchronisation is very demanding, and may expose hardware problems with your computer that had previously gone unnoticed. Each time you run %1, it will continue downloading where it left off. 一開始的同步作業非常的耗費資源,並且可能會暴露出之前沒被發現的電腦硬體問題。每次執行 %1 的時候都會繼續先前未完成的下載。 If you have chosen to limit block chain storage (pruning), the historical data must still be downloaded and processed, but will be deleted afterward to keep your disk usage low. 如果你選擇要限制區塊鏈儲存空間的大小(修剪模式),還是需要下載和處理過去的歷史資料被,但是之後就會把它刪掉來節省磁碟使用量。 Use the default data directory 使用預設的資料目錄 Use a custom data directory: 使用自訂的資料目錄: Bitcoin Bitcoin At least %1 GB of data will be stored in this directory, and it will grow over time. 在這個目錄中至少會存放 %1 GB 的資料,並且還會隨時間增加。 Approximately %1 GB of data will be stored in this directory. 在這個目錄中大約會存放 %1 GB 的資料。 %1 will download and store a copy of the Bitcoin block chain. %1 會下載 Bitcoin 區塊鏈並且儲存一份副本。 The wallet will also be stored in this directory. 錢包檔也會存放在這個目錄中。 Error: Specified data directory "%1" cannot be created. 錯誤: 無法新增指定的資料目錄: %1 Error 錯誤 %n GB of free space available 可用空間尚存 %n GB (of %n GB needed) (需要 %n GB) ModalOverlay Form 表單 Recent transactions may not yet be visible, and therefore your wallet's balance might be incorrect. This information will be correct once your wallet has finished synchronizing with the bitcoin network, as detailed below. 最近的交易可能還看不到,因此錢包餘額可能不正確。在錢包軟體完成跟 bitcoin 網路的同步後,這裡的資訊就會正確。詳情請見下面。 Attempting to spend bitcoins that are affected by not-yet-displayed transactions will not be accepted by the network. 使用還沒顯示出來的交易所影響到的 bitcoin 可能會不被網路所接受。 Number of blocks left 剩餘區塊數 Unknown... 不明... Last block time 最近區塊時間 Progress 進度 Progress increase per hour 每小時進度 calculating... 正在計算中... Estimated time left until synced 預估完成同步所需時間 Hide 隱藏 Unknown. Syncing Headers (%1, %2%)... 不明。正在同步前導資料中(%1, %2%)... OpenURIDialog Open URI 開啓 URI Open payment request from URI or file 從 URI 或檔案開啟付款要求 URI: URI: Select payment request file 選擇付款要求資料檔 Select payment request file to open 選擇要開啟的付款要求資料檔 OpenWalletActivity default wallet 默认钱包 Opening Wallet <b>%1</b>... 正在打开钱包<b>%1</b>... OptionsDialog Options 選項 &Main 主要(&M) Automatically start %1 after logging in to the system. 在登入系統後自動啓動 %1。 &Start %1 on system login 系統登入時啟動 %1 (&S) Size of &database cache 資料庫快取大小(&D) Number of script &verification threads 指令碼驗證執行緒數目(&V) IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1) 代理伺服器的網際網路位址(像是 IPv4 的 127.0.0.1 或 IPv6 的 ::1) Shows if the supplied default SOCKS5 proxy is used to reach peers via this network type. 如果對這種網路類型,有指定用來跟其他節點聯絡的 SOCKS5 代理伺服器的話,就會顯示在這裡。 Use separate SOCKS&5 proxy to reach peers via Tor hidden services: 透過另外的 SOCKS&5 代理伺服器來連線到 Bitcoin 網路中的 Tor 隱藏服務: Hide the icon from the system tray. 隱藏系統通知區圖示 &Hide tray icon 隱藏通知區圖示(&H) Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Exit in the menu. 當視窗關閉時,把應用程式縮到最小,而不是結束。當勾選這個選項時,只能夠用選單中的結束來關掉應用程式。 Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |. 在交易頁籤的情境選單出現的第三方網址連結(URL),比如說區塊探索網站。網址中的 %s 會被取代為交易的雜湊值。可以用直線符號 | 來分隔多個連結。 Open the %1 configuration file from the working directory. 從工作目錄開啟設定檔 %1。 Open Configuration File 開啟設定檔 Reset all client options to default. 重設所有客戶端軟體選項成預設值。 &Reset Options 重設選項(&R) &Network 網路(&N) Disables some advanced features but all blocks will still be fully validated. Reverting this setting requires re-downloading the entire blockchain. Actual disk usage may be somewhat higher. 啟用時有些進階功能會不能使用,不過區塊資料還是會被完全驗證。如果把這個設定改回來,會需要重新下載整個區塊鏈。區塊資料實際使用的磁碟空間會比設定值稍微大一點。 Prune &block storage to 修剪區塊資料大小到 GB GB (十億位元組) Reverting this setting requires re-downloading the entire blockchain. 把這個設定改回來會需要重新下載整個區塊鏈。 MiB MiB (0 = auto, <0 = leave that many cores free) (0 表示程式自動決定,小於 0 表示保留處理器核心不用的數目) W&allet 錢包(&A) Expert 專家 Enable coin &control features 開啟錢幣控制功能(&C) If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed. 如果你關掉「可以花還沒確認的零錢」,那麼交易中找零的零錢就必須要等交易至少有一次確認後,才能夠使用。這也會影響餘額的計算方式。 &Spend unconfirmed change 可以花還沒確認的零錢(&S) Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled. 自動在路由器上開放 Bitcoin 的客戶端通訊埠。只有在你的路由器支援且開啓「通用即插即用」協定(UPnP)時才有作用。 Map port using &UPnP 用 &UPnP 設定通訊埠對應 Accept connections from outside. 接受外來連線 Allow incomin&g connections 接受外來連線(&G) Connect to the Bitcoin network through a SOCKS5 proxy. 透過 SOCKS5 代理伺服器來連線到 Bitcoin 網路。 &Connect through SOCKS5 proxy (default proxy): 透過 SOCKS5 代理伺服器連線(預設代理伺服器 &C): Proxy &IP: 代理位址(&I): &Port: 埠號(&P): Port of the proxy (e.g. 9050) 代理伺服器的通訊埠(像是 9050) Used for reaching peers via: 用來跟其他節點聯絡的中介: IPv4 IPv4 IPv6 IPv6 Tor Tor Connect to the Bitcoin network through a separate SOCKS5 proxy for Tor hidden services. 透過另外的 SOCKS5 代理伺服器來連線到 Bitcoin 網路中的 Tor 隱藏服務。 &Window 視窗(&W) Show only a tray icon after minimizing the window. 視窗縮到最小後只在通知區顯示圖示。 &Minimize to the tray instead of the taskbar 縮到最小到通知區而不是工作列(&M) M&inimize on close 關閉時縮到最小(&I) &Display 顯示(&D) User Interface &language: 使用界面語言(&L): The user interface language can be set here. This setting will take effect after restarting %1. 可以在這裡設定使用者介面的語言。這個設定在重啓 %1 後才會生效。 &Unit to show amounts in: 金額顯示單位(&U): Choose the default subdivision unit to show in the interface and when sending coins. 選擇操作界面和付款時,預設顯示金額的細分單位。 Whether to show coin control features or not. 是否要顯示錢幣控制功能。 &Third party transaction URLs 第三方交易網址連結(&T) Options set in this dialog are overridden by the command line or in the configuration file: 这个对话框中的设置已被如下命令行选项或配置文件项覆盖: &OK 好(&O) &Cancel 取消(&C) default 預設值 none Confirm options reset 確認重設選項 Client restart required to activate changes. 需要重新啟動客戶端軟體來讓改變生效。 Client will be shut down. Do you want to proceed? 客戶端軟體就要關掉了。繼續做下去嗎? Configuration options 設定選項 The configuration file is used to specify advanced user options which override GUI settings. Additionally, any command-line options will override this configuration file. 設定檔可以用來指定進階的使用選項,並且會覆蓋掉圖形介面的設定。不過,命令列的選項也會覆蓋掉設定檔中的選項。 Error 錯誤 The configuration file could not be opened. 沒辦法開啟設定檔。 This change would require a client restart. 這項改變需要重新啟動客戶端軟體。 The supplied proxy address is invalid. 提供的代理伺服器位址無效。 OverviewPage Form 表單 The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet. 顯示的資訊可能是過期的。跟 Bitcoin 網路的連線建立後,你的錢包會自動和網路同步,但是這個步驟還沒完成。 Watch-only: 只能看: Available: 可用金額: Your current spendable balance 目前可用餘額 Pending: 未定金額: Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance 還沒被確認的交易的總金額,可用餘額不包含這些金額 Immature: 未成熟金額: Mined balance that has not yet matured 還沒成熟的開採金額 Balances 餘額 Total: 總金額: Your current total balance 目前全部餘額 Your current balance in watch-only addresses 所有只能看位址的目前餘額 Spendable: 可支配: Recent transactions 最近的交易 Unconfirmed transactions to watch-only addresses 所有只能看位址還沒確認的交易 Mined balance in watch-only addresses that has not yet matured 所有只能看位址還沒成熟的開採金額 Current total balance in watch-only addresses 所有只能看位址的目前全部餘額 PaymentServer Payment request error 要求付款時發生錯誤 Cannot start bitcoin: click-to-pay handler 沒辦法啟動 bitcoin 協議的「按就付」處理器 URI handling URI 處理 'bitcoin://' is not a valid URI. Use 'bitcoin:' instead. 字首為 bitcoin:// 不是有效的 URI,請改用 bitcoin: 開頭。 You are using a BIP70 URL which will be unsupported in the future. 你正在使用BIP70 URL,它在未来会被终止支持。 Payment request fetch URL is invalid: %1 取得付款要求的 URL 無效: %1 Cannot process payment request because BIP70 support was not compiled in. 无法处理支付请求,因为编译时没有启用BIP70支持。 Invalid payment address %1 無效的付款位址 %1 URI cannot be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters. 沒辦法解析 URI 位址!可能是因為 Bitcoin 位址無效,或是 URI 參數格式錯誤。 Payment request file handling 處理付款要求檔案 Payment request file cannot be read! This can be caused by an invalid payment request file. 沒辦法讀取付款要求檔案!可能是無效的檔案造成的。 Payment request rejected 付款的要求被拒絕了 Payment request network doesn't match client network. 付款要求的網路類型跟客戶端不符。 Payment request expired. 付款的要求過期了。 Payment request is not initialized. 付款的要求沒有完成初始化。 Unverified payment requests to custom payment scripts are unsupported. 不支援含有自訂付款指令碼,且沒驗證過的付款要求。 Invalid payment request. 付款的要求無效。 Requested payment amount of %1 is too small (considered dust). 要求付款的金額 %1 太少(會被網路認為是沒必要的零散錢)。 Refund from %1 來自 %1 的退款 Payment request %1 is too large (%2 bytes, allowed %3 bytes). 付款要求 %1 過大 (%2 位元組, 上限 %3 位元組). Error communicating with %1: %2 跟 %1 通訊時發生錯誤: %2 Payment request cannot be parsed! 沒辦法解析付款要求內容! Bad response from server %1 伺服器 %1 的回應有誤 Network request error 發出要求時發生網路錯誤 Payment acknowledged 付款已確認 PeerTableModel User Agent 使用者代理 Node/Service 節點/服務 NodeId 節點識別碼 Ping Ping 時間 Sent 送出 Received 收到 QObject Amount 金額 Enter a Bitcoin address (e.g. %1) 輸入 Bitcoin 位址 (比如說 %1) %1 d %1 天 %1 h %1 小時 %1 m %1 分鐘 %1 s %1 秒 None N/A 未知 %1 ms %1 毫秒 %n second(s) %n 秒鐘 %n minute(s) %n 分鐘 %n hour(s) %n 小時 %n day(s) %n 天 %n week(s) %n 星期 %1 and %2 %1又 %2 %n year(s) %n 年 %1 B %1 B (位元組) %1 KB %1 KB (千位元組) %1 MB %1 MB (百萬位元組) %1 GB %1 GB (十億位元組) Error: Specified data directory "%1" does not exist. 错误:指定的数据目录“%1”不存在。 Error: Cannot parse configuration file: %1. 错误:无法解析配置文件:%1 Error: %1 错误:%1 %1 didn't yet exit safely... %1 還沒有安全地結束... unknown 未知 QRImageWidget &Save Image... 儲存圖片(&S)... &Copy Image 複製圖片(&C) Resulting URI too long, try to reduce the text for label / message. URI 太长,请试着精简标签或消息文本。 Error encoding URI into QR Code. 把 URI 编码成二维码时发生错误。 QR code support not available. 不支援QR code Save QR Code 儲存 QR Code PNG Image (*.png) PNG 圖檔(*.png) RPCConsole N/A 未知 Client version 客戶端軟體版本 &Information 資訊(&I) Debug window 除錯視窗 General 普通 Using BerkeleyDB version 使用 BerkeleyDB 版本 Datadir 資料目錄 To specify a non-default location of the data directory use the '%1' option. 如果不想用默认的数据目录位置,请用 '%1' 这个选项来指定新的位置。 Blocksdir 区块存储目录 To specify a non-default location of the blocks directory use the '%1' option. 如果要自定义区块存储目录的位置,请用 '%1' 这个选项来指定新的位置。 Startup time 啓動時間 Network 網路 Name 名稱 Number of connections 連線數 Block chain 區塊鏈 Current number of blocks 目前區塊數 Memory Pool 記憶體暫存池 Current number of transactions 目前交易數目 Memory usage 記憶體使用量 Wallet: 錢包: (none) (無) &Reset 重置(&R) Received 收到 Sent 送出 &Peers 節點(&P) Banned peers 被禁節點 Select a peer to view detailed information. 選一個節點來看詳細資訊 Whitelisted 列在白名單 Direction 方向 Version 版本 Starting Block 起始區塊 Synced Headers 已同步前導資料 Synced Blocks 已同步區塊 User Agent 使用者代理 Open the %1 debug log file from the current data directory. This can take a few seconds for large log files. 從目前的資料目錄下開啓 %1 的除錯紀錄檔。當紀錄檔很大時,可能會花好幾秒的時間。 Decrease font size 縮小文字 Increase font size 放大文字 Services 服務 Ban Score 惡劣分數 Connection Time 連線時間 Last Send 最近送出 Last Receive 最近收到 Ping Time Ping 時間 The duration of a currently outstanding ping. 目前這一次 ping 已經過去的時間。 Ping Wait Ping 等待時間 Min Ping Ping 最短時間 Time Offset 時間差 Last block time 最近區塊時間 &Open 開啓(&O) &Console 主控台(&C) &Network Traffic 網路流量(&N) Totals 總計 In: 來: Out: 去: Debug log file 除錯紀錄檔 Clear console 清主控台 1 &hour 1 小時(&H) 1 &day 1 天(&D) 1 &week 1 星期(&W) 1 &year 1 年(&Y) &Disconnect 斷線(&D) Ban for 禁止連線 &Unban 連線解禁(&U) Welcome to the %1 RPC console. 歡迎使用 %1 的 RPC 主控台。 Use up and down arrows to navigate history, and %1 to clear screen. 請用游標上下鍵來瀏覽先前指令的紀錄,並用 %1 來清畫面。 Type %1 for an overview of available commands. 請打 %1 來看所有可用指令的簡介。 For more information on using this console type %1. 請打 %1 來取得使用這個主控台的更多資訊。 WARNING: Scammers have been active, telling users to type commands here, stealing their wallet contents. Do not use this console without fully understanding the ramifications of a command. 警告: 已知有詐騙集團會叫人在這個畫面輸入指令,以偷取他們錢包的內容物。如果你沒有充分理解指令可能造成的後果,請不要使用主控台。 Network activity disabled 網路活動已關閉 Executing command without any wallet 不使用任何錢包來執行指令 Executing command using "%1" wallet 使用 %1 錢包來執行指令 (node id: %1) (節點識別碼: %1) via %1 經由 %1 never 沒有過 Inbound 進來 Outbound 出去 Yes No Unknown 不明 ReceiveCoinsDialog &Amount: 金額(&A): &Label: 標記(&L): &Message: 訊息(&M): An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network. 附加在付款要求中的訊息,可以不填,打開要求內容時會顯示。注意: 這個訊息不會隨著付款送到 Bitcoin 網路上。 An optional label to associate with the new receiving address. 跟新收款位址關聯的標記,可以不填。 Use this form to request payments. All fields are <b>optional</b>. 請用這份表單來要求付款。所有欄位都<b>可以不填</b>。 An optional amount to request. Leave this empty or zero to not request a specific amount. 要求付款的金額,可以不填。不確定金額時可以留白或是填零。 &Create new receiving address &生成新的接收位址 Clear all fields of the form. 把表單中的所有欄位清空。 Clear 清空 Native segwit addresses (aka Bech32 or BIP-173) reduce your transaction fees later on and offer better protection against typos, but old wallets don't support them. When unchecked, an address compatible with older wallets will be created instead. 使用 segwit 原生位址(也叫做 Bech32 或 BIP-173)可以減少日後的交易手續費,也比較不容易打錯字,不過會跟舊版的錢包軟體不相容。如果沒有勾選的話,會改產生與舊版錢包軟體相容的位址。 Generate native segwit (Bech32) address 產生 segwit 原生位址(Bech32) Requested payments history 先前要求付款的記錄 Show the selected request (does the same as double clicking an entry) 顯示選擇的要求內容(效果跟按它兩下一樣) Show 顯示 Remove the selected entries from the list 從列表中刪掉選擇的項目 Remove 刪掉 Copy URI 複製 URI Copy label 複製標記 Copy message 複製訊息 Copy amount 複製金額 ReceiveRequestDialog QR Code QR Code Copy &URI 複製 &URI Copy &Address 複製位址(&A) &Save Image... 儲存圖片(&S)... Request payment to %1 付款給 %1 的要求 Payment information 付款資訊 URI URI Address 位址 Amount 金額 Label 標記: Message 訊息 Wallet 錢包 RecentRequestsTableModel Date 日期 Label 標記: Message 訊息 (no label) (無標記) (no message) (無訊息) (no amount requested) (無要求金額) Requested 要求金額 SendCoinsDialog Send Coins 付款 Coin Control Features 錢幣控制功能 Inputs... 輸入... automatically selected 自動選擇 Insufficient funds! 累計金額不足! Quantity: 數目: Bytes: 位元組數: Amount: 金額: Fee: 手續費: After Fee: 計費後金額: Change: 找零金額: If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address. 如果這項有打開,但是找零位址是空的或無效,那麼找零的錢會送到一個新造出來的位址去。 Custom change address 自訂找零位址 Transaction Fee: 交易手續費: Choose... 選項... Using the fallbackfee can result in sending a transaction that will take several hours or days (or never) to confirm. Consider choosing your fee manually or wait until you have validated the complete chain. 以備用手續費金額(fallbackfee)來付手續費可能會造成交易確認時間長達數小時、數天、或是永遠不會確認。請考慮自行指定金額,或是等到完全驗證區塊鏈後,再進行交易。 Warning: Fee estimation is currently not possible. 警告:目前無法計算預估手續費。 collapse fee-settings 展開手續費設定 Specify a custom fee per kB (1,000 bytes) of the transaction's virtual size. Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis per kB" for a transaction size of 500 bytes (half of 1 kB) would ultimately yield a fee of only 50 satoshis. 指定每一千位元祖(kB)擬真大小的交易所要付出的手續費。 注意: 交易手續費是以位元組為單位來計算。因此當指定手續費為每千位元組 100 個 satoshi 時,對於一筆大小為 500 位元組(一千位元組的一半)的交易,其手續費會只有 50 個 satoshi。 per kilobyte 每千位元組 Hide 隱藏 Recommended: 建議值: Custom: 自訂: (Smart fee not initialized yet. This usually takes a few blocks...) (手續費智慧演算法還沒準備好。通常都要等幾個區塊才行...) Send to multiple recipients at once 一次付給多個收款人 Add &Recipient 增加收款人(&R) Clear all fields of the form. 把表單中的所有欄位清空。 Dust: 零散錢: When there is less transaction volume than space in the blocks, miners as well as relaying nodes may enforce a minimum fee. Paying only this minimum fee is just fine, but be aware that this can result in a never confirming transaction once there is more demand for bitcoin transactions than the network can process. 当交易量小于可用区块空间时,矿工和中继节点可能会执行最低手续费率限制。按照这个最低费率来支付手续费也是可以的,但请注意,一旦交易需求超出比特币网络能处理的限度,你的交易可能永远也无法确认。 A too low fee might result in a never confirming transaction (read the tooltip) 手續費太低的話可能會造成永遠無法確認的交易(請參考提示) Confirmation time target: 目標確認時間: Enable Replace-By-Fee 啟用手續費追加 With Replace-By-Fee (BIP-125) you can increase a transaction's fee after it is sent. Without this, a higher fee may be recommended to compensate for increased transaction delay risk. 手續費追加(Replace-By-Fee, BIP-125)可以讓你在送出交易後才來提高手續費。不用這個功能的話,建議付比較高的手續費來降低交易延遲的風險。 Clear &All 全部清掉(&A) Balance: 餘額: Confirm the send action 確認付款動作 S&end 付款(&E) Copy quantity 複製數目 Copy amount 複製金額 Copy fee 複製手續費 Copy after fee 複製計費後金額 Copy bytes 複製位元組數 Copy dust 複製零散金額 Copy change 複製找零金額 %1 (%2 blocks) %1 (%2 個區塊) from wallet '%1' 從錢包 %1 %1 to '%2' %1 到 '%2' %1 to %2 %1 給 %2 Are you sure you want to send? 你確定要付錢出去嗎? or You can increase the fee later (signals Replace-By-Fee, BIP-125). 你可以之後再提高手續費(有 BIP-125 手續費追加的標記) Please, review your transaction. 請再次確認交易內容。 Transaction fee 交易手續費 Not signalling Replace-By-Fee, BIP-125. 沒有 BIP-125 手續費追加的標記。 Total Amount 總金額 To review recipient list click "Show Details..." 要查看收件人列表,請單擊"顯示詳細訊息..." Confirm send coins 確認付款金額 The recipient address is not valid. Please recheck. 收款位址無效。請再檢查看看。 The amount to pay must be larger than 0. 付款金額必須大於零。 The amount exceeds your balance. 金額超過餘額了。 The total exceeds your balance when the %1 transaction fee is included. 包含 %1 的交易手續費後,總金額超過你的餘額了。 Duplicate address found: addresses should only be used once each. 發現有重複的位址: 每個位址只能出現一次。 Transaction creation failed! 製造交易失敗了! The transaction was rejected with the following reason: %1 交易因為以下原因被拒絕了: %1 A fee higher than %1 is considered an absurdly high fee. 高於 %1 的手續費會被認為是不合理。 Payment request expired. 付款的要求過期了。 Estimated to begin confirmation within %n block(s). 预计在等待 %n 个区块后会有第一个确认。 Warning: Invalid Bitcoin address 警告: Bitcoin 位址無效 Warning: Unknown change address 警告: 不明的找零位址 Confirm custom change address 自定找零位址確認 The address you selected for change is not part of this wallet. Any or all funds in your wallet may be sent to this address. Are you sure? 選擇的找零位址並不屬於這個錢包。部份或是全部的錢會被送到這個位址去。你確定嗎? (no label) (無標記) SendCoinsEntry A&mount: 金額(&M): Pay &To: 付給(&T): &Label: 標記(&L): Choose previously used address 選擇先前使用過的位址 This is a normal payment. 這是一筆正常的付款。 The Bitcoin address to send the payment to 接收付款的 Bitcoin 位址 Alt+A Alt+A Paste address from clipboard 貼上剪貼簿裡的位址 Alt+P Alt+P Remove this entry 刪掉這個項目 The fee will be deducted from the amount being sent. The recipient will receive less bitcoins than you enter in the amount field. If multiple recipients are selected, the fee is split equally. 手續費會從要付款出去的金額中扣掉。因此收款人會收到比輸入的金額還要少的 bitcoin。如果有多個收款人的話,手續費會平均分配來扣除。 S&ubtract fee from amount 從付款金額減去手續費(&U) Use available balance 使用全部可用餘額 Message: 訊息: This is an unauthenticated payment request. 這是個沒有驗證過身份的付款要求。 This is an authenticated payment request. 這是個已經驗證過身份的付款要求。 Enter a label for this address to add it to the list of used addresses 請輸入這個位址的標記,來把它加進去已使用過位址的清單。 A message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network. 附加在 Bitcoin 付款協議的資源識別碼(URI)中的訊息,會和交易內容一起存起來,給你自己做參考。注意: 這個訊息不會送到 Bitcoin 網路上。 Pay To: 付給: Memo: 備註: Enter a label for this address to add it to your address book 請輸入這個位址的標記來把它加進位址簿中 SendConfirmationDialog Yes ShutdownWindow %1 is shutting down... 正在關閉 %1 中... Do not shut down the computer until this window disappears. 在這個視窗不見以前,請不要關掉電腦。 SignVerifyMessageDialog Signatures - Sign / Verify a Message 簽章 - 簽署或驗證訊息 &Sign Message 簽署訊息(&S) You can sign messages/agreements with your addresses to prove you can receive bitcoins sent to them. Be careful not to sign anything vague or random, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. 你可以用自己的位址簽署訊息或合約,來證明你可以從該位址收款。但是請小心,不要簽署語意含糊不清,或隨機產生的內容,因為釣魚式詐騙可能會用騙你簽署的手法來冒充是你。只有在語句中的細節你都同意時才簽署。 The Bitcoin address to sign the message with 用來簽署訊息的 Bitcoin 位址 Choose previously used address 選擇先前使用過的位址 Alt+A Alt+A Paste address from clipboard 貼上剪貼簿裡的位址 Alt+P Alt+P Enter the message you want to sign here 請在這裡輸入你想簽署的訊息 Signature 簽章 Copy the current signature to the system clipboard 複製目前的簽章到系統剪貼簿 Sign the message to prove you own this Bitcoin address 簽署這個訊息來證明這個 Bitcoin 位址是你的 Sign &Message 簽署訊息(&M) Reset all sign message fields 重設所有訊息簽署欄位 Clear &All 全部清掉(&A) &Verify Message 驗證訊息(&V) Enter the receiver's address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Note that this only proves the signing party receives with the address, it cannot prove sendership of any transaction! 請在下面輸入收款人的位址,訊息(請確定完整複製了所包含的換行,空格,跳位符號等等),以及簽章,來驗證這個訊息。請小心,除了訊息內容以外,不要對簽章本身過度解讀,以避免被用「中間人攻擊法」詐騙。請注意,通過驗證的簽章只能證明簽章人確實可以從該位址收款,不能證明任何交易中的付款人身份! The Bitcoin address the message was signed with 簽署這個訊息的 Bitcoin 位址 Verify the message to ensure it was signed with the specified Bitcoin address 驗證這個訊息來確定是用指定的 Bitcoin 位址簽署的 Verify &Message 驗證訊息(&M) Reset all verify message fields 重設所有訊息驗證欄位 Click "Sign Message" to generate signature 請按一下「簽署訊息」來產生簽章 The entered address is invalid. 輸入的位址無效。 Please check the address and try again. 請檢查位址是否正確後再試一次。 The entered address does not refer to a key. 輸入的位址沒有對應到你的任何密鑰。 Wallet unlock was cancelled. 錢包解鎖已取消。 Private key for the entered address is not available. 沒有對應輸入位址的密鑰。 Message signing failed. 訊息簽署失敗。 Message signed. 訊息簽署好了。 The signature could not be decoded. 沒辦法把這個簽章解碼。 Please check the signature and try again. 請檢查簽章是否正確後再試一次。 The signature did not match the message digest. 這個簽章跟訊息的數位摘要不符。 Message verification failed. 訊息驗證失敗。 Message verified. 訊息驗證沒錯。 TrafficGraphWidget KB/s KB/s TransactionDesc Open for %n more block(s) 到下 %n 個區塊生出來前可修改 Open until %1 到 %1 前可修改 conflicted with a transaction with %1 confirmations 跟一個目前確認 %1 次的交易互相衝突 0/unconfirmed, %1 0 次/未確認,%1 in memory pool 在記憶池中 not in memory pool 不在記憶池中 abandoned 已中止 %1/unconfirmed %1 次/未確認 %1 confirmations 確認 %1 次 Status 狀態 Date 日期 Source 來源 Generated 生產出來 From 來源 unknown 未知 To 目的 own address 自己的位址 watch-only 只能看 label 標記 Credit 入帳 matures in %n more block(s) 再等 %n 個區塊生出來後成熟 not accepted 不被接受 Debit 出帳 Total debit 出帳總額 Total credit 入帳總額 Transaction fee 交易手續費 Net amount 淨額 Message 訊息 Comment 附註 Transaction ID 交易識別碼 Transaction total size 交易總大小 Transaction virtual size 交易擬真大小 Output index 輸出索引 Merchant 商家 Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours. 生產出來的錢要再等 %1 個區塊生出來後才成熟可以用。當區塊生產出來時會公布到網路上,來被加進區塊鏈。如果加失敗了,狀態就會變成「不被接受」,而且不能夠花。如果在你生產出區塊的幾秒鐘內,也有其他節點生產出來的話,就有可能會發生這種情形。 Debug information 除錯資訊 Transaction 交易 Inputs 輸入 Amount 金額 true false TransactionDescDialog This pane shows a detailed description of the transaction 這個版面顯示這次交易的詳細說明 Details for %1 交易 %1 的明細 TransactionTableModel Date 日期 Type 種類 Label 標記: Open for %n more block(s) 到下 %n 個區塊生出來前可修改 Open until %1 到 %1 前可修改 Unconfirmed 未確認 Abandoned 已中止 Confirming (%1 of %2 recommended confirmations) 確認中(已經 %1 次,建議至少 %2 次) Confirmed (%1 confirmations) 已確認(%1 次) Conflicted 有衝突 Immature (%1 confirmations, will be available after %2) 未成熟(確認 %1 次,會在 %2 次後可用) Generated but not accepted 生產出來但是不被接受 Received with 收款 Received from 收款自 Sent to 付款 Payment to yourself 付給自己 Mined 開採所得 watch-only 只能看 (n/a) (不適用) (no label) (無標記) Transaction status. Hover over this field to show number of confirmations. 交易狀態。把游標停在欄位上會顯示確認次數。 Date and time that the transaction was received. 收到交易的日期和時間。 Type of transaction. 交易的種類。 Whether or not a watch-only address is involved in this transaction. 不論如何有一個只能觀看的地只有參與這次的交易 User-defined intent/purpose of the transaction. 使用者定義的交易動機或理由。 Amount removed from or added to balance. 要減掉或加進餘額的金額。 TransactionView All 全部 Today 今天 This week 這星期 This month 這個月 Last month 上個月 This year 今年 Range... 指定範圍... Received with 收款 Sent to 付款 To yourself 給自己 Mined 開採所得 Other 其它 Enter address, transaction id, or label to search 請輸入要搜尋的位址、交易識別碼、或是標記 Min amount 最小金額 Abandon transaction 中止交易 Increase transaction fee 提高手續費 Copy address 複製位址 Copy label 複製標記 Copy amount 複製金額 Copy transaction ID 複製交易識別碼 Copy raw transaction 複製交易原始資料 Copy full transaction details 複製完整交易明細 Edit label 編輯標記 Show transaction details 顯示交易明細 Export Transaction History 匯出交易記錄 Comma separated file (*.csv) 逗點分隔資料檔(*.csv) Confirmed 已確認 Watch-only 只能觀看的 Date 日期 Type 種類 Label 標記: Address 位址 ID 識別碼 Exporting Failed 匯出失敗 There was an error trying to save the transaction history to %1. 儲存交易記錄到 %1 時發生錯誤。 Exporting Successful 匯出成功 The transaction history was successfully saved to %1. 交易記錄已經成功儲存到 %1 了。 Range: 範圍: to UnitDisplayStatusBarControl Unit to show amounts in. Click to select another unit. 金額顯示單位。可以點選其他單位。 WalletController Close wallet 關閉錢包 Closing the wallet for too long can result in having to resync the entire chain if pruning is enabled. 關上錢包太久的話且修剪模式又有開啟的話,可能會造成日後需要重新同步整個區塊鏈。 WalletFrame No wallet has been loaded. 沒有載入錢包。 WalletModel Send Coins 付款 Fee bump error 手續費提升失敗 Increasing transaction fee failed 手續費提高失敗了 Do you want to increase the fee? 想要提高手續費嗎? Current fee: 目前費用: Increase: 增加: New fee: 新的費用: Confirm fee bump 確認手續費提升 Can't sign transaction. 沒辦法簽署交易。 Could not commit transaction 沒辦法提交交易 default wallet 預設錢包 WalletView &Export 匯出(&E) Export the data in the current tab to a file 將目前分頁的資料匯出存成檔案 Backup Wallet 備份錢包 Wallet Data (*.dat) 錢包資料檔(*.dat) Backup Failed 備份失敗 There was an error trying to save the wallet data to %1. 儲存錢包資料到 %1 時發生錯誤。 Backup Successful 備份成功 The wallet data was successfully saved to %1. 錢包的資料已經成功儲存到 %1 了。 Cancel 取消 bitcoin-core Distributed under the MIT software license, see the accompanying file %s or %s 依據 MIT 軟體授權條款散布,詳情請見附帶的 %s 檔案或是 %s Prune configured below the minimum of %d MiB. Please use a higher number. 設定的修剪值小於最小需求的 %d 百萬位元組(MiB)。請指定大一點的數字。 Prune: last wallet synchronisation goes beyond pruned data. You need to -reindex (download the whole blockchain again in case of pruned node) 修剪模式:錢包的最後同步狀態是在被修剪掉的區塊資料中。你需要用 -reindex 參數執行(會重新下載整個區塊鏈) Rescans are not possible in pruned mode. You will need to use -reindex which will download the whole blockchain again. 在修剪模式下沒辦法重新掃描區塊鏈。你需要配合使用 -reindex 參數來重新下載整個區塊鏈。 Error: A fatal internal error occurred, see debug.log for details 錯誤: 發生了致命的內部錯誤,詳情請看 debug.log Pruning blockstore... 正在修剪區塊資料庫中... Unable to start HTTP server. See debug log for details. 無法啟動 HTTP 伺服器。詳情請看除錯紀錄。 The %s developers %s 開發人員 Can't generate a change-address key. No keys in the internal keypool and can't generate any keys. 无法生成找零地址密钥。 内部密钥池中没有密钥,也无法生成任何密钥。 Cannot obtain a lock on data directory %s. %s is probably already running. 沒辦法鎖定資料目錄 %s。%s 可能已經在執行了。 Cannot provide specific connections and have addrman find outgoing connections at the same. 無法同時指定特定連線位址以及自動尋找連線。 Error reading %s! All keys read correctly, but transaction data or address book entries might be missing or incorrect. 讀取錢包檔 %s 時發生錯誤!所有的密鑰都正確讀取了,但是交易資料或位址簿資料可能會缺少或不正確。 Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly. 請檢查電腦日期和時間是否正確!%s 沒辦法在時鐘不準的情況下正常運作。 Please contribute if you find %s useful. Visit %s for further information about the software. 如果你覺得 %s 有用,可以幫助我們。關於這個軟體的更多資訊請見 %s。 The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correct 區塊資料庫中有來自未來的區塊。可能是你電腦的日期時間不對。如果確定電腦日期時間沒錯的話,就重建區塊資料庫看看。 This is a pre-release test build - use at your own risk - do not use for mining or merchant applications 這是個還沒發表的測試版本 - 使用請自負風險 - 請不要用來開採或做商業應用 This is the transaction fee you may discard if change is smaller than dust at this level 在該交易手續費率下,找零的零錢會因為少於零散錢的金額,而自動棄掉變成手續費 Unable to replay blocks. You will need to rebuild the database using -reindex-chainstate. 沒辦法重算區塊。你需要先用 -reindex-chainstate 參數來重建資料庫。 Unable to rewind the database to a pre-fork state. You will need to redownload the blockchain 沒辦法將資料庫倒轉回分岔前的狀態。必須要重新下載區塊鍊。 Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues. 警告: 位元幣網路對於區塊鏈結的決定目前有分歧!有些礦工看來會有問題。 Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade. 警告: 我們和某些連線的節點對於區塊鏈結的決定不同!你可能需要升級,或是需要等其它的節點升級。 %d of last 100 blocks have unexpected version 最近的 100 個區塊中有 %d 個意料之外的區塊版本 %s corrupt, salvage failed 錢包檔 %s 壞掉了,搶救失敗 -maxmempool must be at least %d MB 參數 -maxmempool 至少要給 %d 百萬位元組(MB) Cannot resolve -%s address: '%s' 沒辦法解析 -%s 參數指定的位址: '%s' Change index out of range 找零的索引值超出範圍 Config setting for %s only applied on %s network when in [%s] section. 对 %s 的配置设置只对 %s 网络生效,如果它位于配置的 [%s] 章节的话 Copyright (C) %i-%i 版權所有 (C) %i-%i Corrupted block database detected 發現區塊資料庫壞掉了 Do you want to rebuild the block database now? 你想要現在重建區塊資料庫嗎? Error initializing block database 初始化區塊資料庫時發生錯誤 Error initializing wallet database environment %s! 初始化錢包資料庫環境 %s 時發生錯誤! Error loading %s 載入檔案 %s 時發生錯誤 Error loading %s: Private keys can only be disabled during creation 載入 %s 時發生錯誤: 只有在造新錢包時能夠指定不允許私鑰 Error loading %s: Wallet corrupted 載入檔案 %s 時發生錯誤: 錢包損毀了 Error loading %s: Wallet requires newer version of %s 載入檔案 %s 時發生錯誤: 這個錢包需要新版的 %s Error loading block database 載入區塊資料庫時發生錯誤 Error opening block database 打開區塊資料庫時發生錯誤 Failed to listen on any port. Use -listen=0 if you want this. 在任意的通訊埠聽候失敗。如果你希望這樣的話,可以設定 -listen=0. Failed to rescan the wallet during initialization 初始化時重新掃描錢包失敗了 Importing... 正在匯入中... Incorrect or no genesis block found. Wrong datadir for network? 創世區塊不正確或找不到。資料目錄錯了嗎? Initialization sanity check failed. %s is shutting down. 初始化時的基本檢查失敗了。%s 就要關閉了。 Invalid P2P permission: '%s' 無效的 P2P 權限: '%s' Invalid amount for -%s=<amount>: '%s' 參數 -%s=<金額> 指定的金額無效: '%s' Invalid amount for -discardfee=<amount>: '%s' 設定 -discardfee=<金額> 的金額無效: '%s' Invalid amount for -fallbackfee=<amount>: '%s' 設定 -fallbackfee=<金額> 的金額無效: '%s' Specified blocks directory "%s" does not exist. 指定的區塊目錄 "%s" 不存在。 Unknown address type '%s' 不明的位址類型 '%s' Unknown change type '%s' 不明的找零位址類型 '%s' Upgrading txindex database 正在升級 txindex 資料庫 Loading P2P addresses... 正在載入 P2P 位址資料... Error: Disk space is too low! 錯誤: 磁碟空間很少! Loading banlist... 正在載入禁止連線名單中... Not enough file descriptors available. 檔案描述元不足。 Prune cannot be configured with a negative value. 修剪值不能設定為負的。 Prune mode is incompatible with -txindex. 修剪模式和 -txindex 參數不相容。 Replaying blocks... 正在對區塊進行重算... Rewinding blocks... 正在倒轉回區塊鏈之前的狀態... The source code is available from %s. 原始碼可以在 %s 取得。 Transaction fee and change calculation failed 計算交易手續費和找零失敗了 Unable to bind to %s on this computer. %s is probably already running. 沒辦法繫結在這台電腦上的 %s 。%s 可能已經在執行了。 Unable to generate keys 沒辦法產生密鑰 Unsupported logging category %s=%s. 不支援的紀錄類別 %s=%s。 Upgrading UTXO database 正在升級 UTXO 資料庫 User Agent comment (%s) contains unsafe characters. 使用者代理註解(%s)中含有不安全的字元。 Verifying blocks... 正在驗證區塊資料... Wallet needed to be rewritten: restart %s to complete 錢包需要重寫: 請重新啓動 %s 來完成 Error: Listening for incoming connections failed (listen returned error %s) 錯誤: 聽候外來連線失敗(回傳錯誤 %s) Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions) -maxtxfee=<amount>: '%s' 的金額無效 (必須大於最低轉發手續費 %s 以避免交易無法確認) The transaction amount is too small to send after the fee has been deducted 扣除手續費後的交易金額太少而不能傳送 You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain 回到非修剪的模式需要用 -reindex 參數來重建資料庫。這會導致重新下載整個區塊鏈。 Error reading from database, shutting down. 讀取資料庫時發生錯誤,要關閉了。 Error upgrading chainstate database 升級區塊鏈狀態資料庫時發生錯誤 Error: Disk space is low for %s 错误: %s 所在的磁盘空间低。 Invalid -onion address or hostname: '%s' 無效的 -onion 位址或主機名稱: '%s' Invalid -proxy address or hostname: '%s' 無效的 -proxy 位址或主機名稱: '%s' Invalid amount for -paytxfee=<amount>: '%s' (must be at least %s) 設定 -paytxfee=<金額> 的金額無效: '%s' (至少要有 %s) Invalid netmask specified in -whitelist: '%s' 指定在 -whitelist 的網段無效: '%s' Need to specify a port with -whitebind: '%s' 指定 -whitebind 時必須包含通訊埠: '%s' Prune mode is incompatible with -blockfilterindex. 修剪模式與 -blockfilterindex不相容。 Reducing -maxconnections from %d to %d, because of system limitations. 因為系統的限制,將 -maxconnections 參數從 %d 降到了 %d Section [%s] is not recognized. 无法识别配置章节 [%s]。 Signing transaction failed 簽署交易失敗 Specified -walletdir "%s" does not exist 以 -walletdir 指定的路徑 "%s" 不存在 Specified -walletdir "%s" is a relative path 以 -walletdir 指定的路徑 "%s" 是相對路徑 Specified -walletdir "%s" is not a directory 以 -walletdir 指定的路徑 "%s" 不是個目錄 The specified config file %s does not exist 指定的配置文件 %s 不存在 The transaction amount is too small to pay the fee 交易金額太少而付不起手續費 This is experimental software. 這套軟體屬於實驗性質。 Transaction amount too small 交易金額太小 Transaction too large 交易位元量太大 Unable to bind to %s on this computer (bind returned error %s) 無法和這台電腦上的 %s 繫結(回傳錯誤 %s) Unable to create the PID file '%s': %s 无法创建PID文件'%s': %s Unable to generate initial keys 無法產生初始的密鑰 Unknown -blockfilterindex value %s. 未知 -blockfilterindex 數值 %s. Verifying wallet(s)... 正在驗證錢包資料... Warning: unknown new rules activated (versionbit %i) 警告: 不明的交易規則被啟用了(versionbit %i) Zapping all transactions from wallet... 正在砍掉錢包中的所有交易... -maxtxfee is set very high! Fees this large could be paid on a single transaction. 參數 -maxtxfee 設定了很高的金額!這可是你一次交易就有可能付出的最高手續費。 This is the transaction fee you may pay when fee estimates are not available. 這是當預估手續費還沒計算出來時,付款交易預設會付的手續費。 This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit %s and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard. 此產品包含了由 OpenSSL Project 所開發的 OpenSSL Toolkit 軟體 %s, 由 Eric Young 撰寫的加解密軟體,以及由 Thomas Bernard 所撰寫的 UPnP 軟體。 Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments. 網路版本字串的總長度(%i)超過最大長度(%i)了。請減少 uacomment 參數的數目或長度。 Warning: Wallet file corrupt, data salvaged! Original %s saved as %s in %s; if your balance or transactions are incorrect you should restore from a backup. 警告: 錢包檔壞掉,但資料被救回來了!原來的檔案 %s 改儲存為 %s,在目錄 %s 下。 如果餘額或交易資料有誤的話,你應該要從備份資料復原回來。 %s is set very high! %s 的設定值異常大! Error loading wallet %s. Duplicate -wallet filename specified. 載入錢包檔 %s 失敗。-wallet 參數指定了重複的檔名。 Starting network threads... 正在啟動網路執行緒... The wallet will avoid paying less than the minimum relay fee. 錢包軟體會付多於最小轉發費用的手續費。 This is the minimum transaction fee you pay on every transaction. 這是你每次交易付款時最少要付的手續費。 This is the transaction fee you will pay if you send a transaction. 這是你交易付款時所要付的手續費。 Transaction amounts must not be negative 交易金額不能是負的 Transaction has too long of a mempool chain 交易造成記憶池中的交易鏈太長 Transaction must have at least one recipient 交易必須至少要有一個收款人 Unknown network specified in -onlynet: '%s' 在 -onlynet 指定了不明的網路別: '%s' Insufficient funds 累積金額不足 Cannot upgrade a non HD split wallet without upgrading to support pre split keypool. Please use -upgradewallet=169900 or -upgradewallet with no version specified. 無法將一個非 HD 分支錢包升級成不支援預先分支密鑰池的 HD 分支錢包版本。請用 -upgradewallet=169900 參數或是不指定版本的 -upgradewallet 參數來升級錢包。 Fee estimation failed. Fallbackfee is disabled. Wait a few blocks or enable -fallbackfee. 計算預估手續費失敗了,也沒有備用手續費(fallbackfee)可用。請再多等待幾個區塊,或是啟用 -fallbackfee 參數。 Warning: Private keys detected in wallet {%s} with disabled private keys 警告: 在不允許私鑰的錢包 {%s} 中發現有私鑰 Cannot write to data directory '%s'; check permissions. 沒辦法寫入資料目錄 '%s',請檢查是否有權限。 Loading block index... 正在載入區塊索引... Loading wallet... 正在載入錢包資料... Cannot downgrade wallet 沒辦法把錢包格式降級 Rescanning... 正在重新掃描... Done loading 載入完成