AddressBookPage Right-click to edit address or label 鼠标右击编辑地址或标签 Create a new address 创建新地址 &New 新建(&N) Copy the currently selected address to the system clipboard 复制当前选中的地址到系统剪贴板 &Copy 复制(&C) C&lose 关闭(&C) &Copy Address 复制地址(&C) Delete the currently selected address from the list 从列表中删除选中的地址 Export the data in the current tab to a file 导出当前分页里的数据到文件 &Export 导出(&E) &Delete 删除(&D) Choose the address to send coins to 选择发币地址 Choose the address to receive coins with 选择收币地址 C&hoose 选择(&H) Sending addresses 正在发送地址 Receiving addresses 正在接收地址 These are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins. 这是您用来付款的比特币地址。在付款前,请仔细核实付款金额和收款地址。 These are your Bitcoin addresses for receiving payments. It is recommended to use a new receiving address for each transaction. 这些都是您的比特币地址,可用于收款。建议对每笔交易都使用一个新的地址。 Copy &Label 复制标签(&L) &Edit 编辑(&E) Export Address List 导出地址列表 Comma separated file (*.csv) 逗号分隔文件 (*.csv) Exporting Failed 导出失败 There was an error trying to save the address list to %1. Please try again. 保存地址列表出现 %1错误。请重试。 AddressTableModel Label 标签 Address 地址 (no label) (没有标签) AskPassphraseDialog Passphrase Dialog 密码对话框 Enter passphrase 输入密码 New passphrase 新密码 Repeat new passphrase 重复新密码 Encrypt wallet 钱包加密 This operation needs your wallet passphrase to unlock the wallet. 此操作需要您首先使用密码解锁该钱包。 Unlock wallet 解锁钱包 This operation needs your wallet passphrase to decrypt the wallet. 该操作需要您首先使用密码解密钱包。 Decrypt wallet 解密钱包 Change passphrase 更改密码 Confirm wallet encryption 确认加密钱包 Warning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR BITCOINS</b>! 警告:如果您加密了您的钱包,但是忘记了密码,你将会<b>丢失所有的比特币</b>! Are you sure you wish to encrypt your wallet? 您确定需要为钱包加密吗? Bitcoin Core will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer. 比特币核心现在将关闭以完成加密过程。请记住,在您的计算机被恶意软件感染的情况下,加密不能完全保护您的比特币免于被盗。 IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet. 重要提示:您以前备份的钱包文件应该替换成最新生成的加密钱包文件(重新备份)。从安全性上考虑,您以前备份的未加密的钱包文件,在您使用新的加密钱包后将无效,请重新备份。 Warning: The Caps Lock key is on! 警告:大写锁定键处于打开状态! Wallet encrypted 钱包已加密 Enter the new passphrase to the wallet.<br/>Please use a passphrase of <b>ten or more random characters</b>, or <b>eight or more words</b>. 请输入新的钱包密码. <br/>密码须包含<b>10个以上随机字符</b>,或<b>8个以上单词</b>. Enter the old passphrase and new passphrase to the wallet. 请输入钱包的旧密码与新密码。 Wallet encryption failed 钱包加密失败 Wallet encryption failed due to an internal error. Your wallet was not encrypted. 由于一个本地错误,加密钱包的操作已经失败。您的钱包没能被加密。 The supplied passphrases do not match. 密码不匹配。 Wallet unlock failed 钱包解锁失败 The passphrase entered for the wallet decryption was incorrect. 用于解密钱包的密码不正确。 Wallet decryption failed 钱包解密失败。 Wallet passphrase was successfully changed. 修改钱包密码成功。 BanTableModel IP/Netmask IP/网络掩码 BitcoinGUI Sign &message... 消息签名(&M)... Synchronizing with network... 正在与网络同步... &Overview 概况(&O) Node 节点 Show general overview of wallet 显示钱包概况 &Transactions 交易记录(&T) Browse transaction history 查看交易历史 E&xit 退出(&X) Quit application 退出程序 About &Qt 关于 &Qt Show information about Qt 显示 Qt 相关信息 &Options... 选项(&O)... &Encrypt Wallet... 加密钱包(&E)... &Backup Wallet... 备份钱包(&B)... &Change Passphrase... 更改密码(&C)... &Sending addresses... 正在发送地址(&S)... &Receiving addresses... 正在接收地址(&R)... Open &URI... 打开 &URI... Bitcoin Core client 比特币核心钱包 Importing blocks from disk... 正在从磁盘导入数据块... Reindexing blocks on disk... 正在为数据块建立索引... Send coins to a Bitcoin address 向一个比特币地址发送比特币 Backup wallet to another location 备份钱包到其他文件夹 Change the passphrase used for wallet encryption 更改钱包加密口令 &Debug window 调试窗口(&D) Open debugging and diagnostic console 打开调试和诊断控制台 &Verify message... 验证消息(&V)... Bitcoin 比特币 Wallet 钱包 &Send 发送(&S) &Receive 接收(&R) Show information about Bitcoin Core 显示有关比特币核心钱包信息 &Show / Hide 显示 / 隐藏(&S) Show or hide the main Window 显示或隐藏主窗口 Encrypt the private keys that belong to your wallet 对钱包中的私钥加密 Sign messages with your Bitcoin addresses to prove you own them 用比特币地址关联的私钥为消息签名,以证明您拥有这个比特币地址 Verify messages to ensure they were signed with specified Bitcoin addresses 校验消息,确保该消息是由指定的比特币地址所有者签名的 &File 文件(&F) &Settings 设置(&S) &Help 帮助(&H) Tabs toolbar 分页工具栏 Bitcoin Core 比特币核心 Request payments (generates QR codes and bitcoin: URIs) 请求支付(生成二维码和 bitcoin: URI) &About Bitcoin Core 关于比特币核心(&A) Modify configuration options for Bitcoin Core 修改比特币核心的配置选项 Show the list of used sending addresses and labels 显示用过的发送地址和标签的列表 Show the list of used receiving addresses and labels 显示用过的接收地址和标签的列表 Open a bitcoin: URI or payment request 打开一个比特币:URI 或支付请求 &Command-line options 命令行选项(&C) Show the Bitcoin Core help message to get a list with possible Bitcoin command-line options 显示比特币核心 程序帮助信息,获取可用的命令行选项 %n active connection(s) to Bitcoin network %n 个到比特币网络的活动连接 No block source available... 沒有可用的区块来源... Processed %n block(s) of transaction history. 已处理 %n 个交易历史数据块。 %n hour(s) %n 小时 %n day(s) %n 天 %n week(s) %n 周 %1 and %2 %1 和 %2 %n year(s) %n 年 %1 behind 落后 %1 Last received block was generated %1 ago. 最新收到的区块产生于 %1。 Transactions after this will not yet be visible. 在此之后的交易尚未可见 Error 错误 Warning 警告 Information 信息 Up to date 已是最新 Catching up... 更新中... Date: %1 日期: %1 Amount: %1 金额: %1 Type: %1 类型: %1 Label: %1 标签: %1 Address: %1 地址: %1 Sent transaction 发送交易 Incoming transaction 流入交易 Wallet is <b>encrypted</b> and currently <b>unlocked</b> 钱包已被<b>加密</b>,当前为<b>解锁</b>状态 Wallet is <b>encrypted</b> and currently <b>locked</b> 钱包已被<b>加密</b>,当前为<b>锁定</b>状态 ClientModel Network Alert 网络警报 CoinControlDialog Coin Selection 币源选择(Coin Selection) Quantity: 总量: Bytes: 字节: Amount: 金额: Priority: 优先级: Fee: 费用: Dust: 小额: After Fee: 加上交易费用后: Change: 变更 : (un)select all (不)全选 Tree mode 树状模式 List mode 列表模式 Amount 金额 Received with label 按标签收款 Received with address 按地址收款 Date 日期 Confirmations 确认 Confirmed 已确认 Priority 优先级 Copy address 复制地址 Copy label 复制标签 Copy amount 复制金额 Copy transaction ID 复制交易编号 Lock unspent 锁定未花费 Unlock unspent 解锁未花费 Copy quantity 复制金额 Copy fee 复制交易费 Copy after fee 复制含交易费的金额 Copy bytes 复制字节 Copy priority 复制优先级 Copy dust 复制小额 Copy change 复制零钱 highest 最高 higher 更高 high medium-high 中高 medium 中等 low-medium 中低 low lower 更低 lowest 最低 (%1 locked) (%1 锁定) none This label turns red if the transaction size is greater than 1000 bytes. 如果交易规模大于 1000 字节,此标签将变为红色。 This label turns red if the priority is smaller than "medium". 如果优先级小于“中等”,此标签将变为红色。 This label turns red if any recipient receives an amount smaller than %1. 如果任何接收人收到的金额小于 %1,此标签将变为红色。 Can vary +/- %1 satoshi(s) per input. 可能会有 正负 %1 聪(satoshi)的偏差 yes no This means a fee of at least %1 per kB is required. 这意味着将对交易收取 %1/千字节 的交易费。 Can vary +/- 1 byte per input. 每笔输入可能会有 正负1字节的偏差。 Transactions with higher priority are more likely to get included into a block. 交易的优先级越高,被矿工收入数据块的速度也越快。 (no label) (没有标签) change from %1 (%2) 来自%1的零钱 (%2) (change) (零钱) EditAddressDialog Edit Address 编辑地址 &Label 标签(&L) The label associated with this address list entry 与此地址相关的标签项 The address associated with this address list entry. This can only be modified for sending addresses. 该地址已与地址列表中的条目关联,只能被发送地址修改。 &Address 地址(&A) New receiving address 新建接收地址 New sending address 新建发送地址 Edit receiving address 编辑接收地址 Edit sending address 编辑发送地址 The entered address "%1" is already in the address book. 输入的地址“%1”已经存在于地址簿中。 The entered address "%1" is not a valid Bitcoin address. 您输入的“%1”不是有效的比特币地址。 Could not unlock wallet. 无法解锁钱包 New key generation failed. 新的密钥生成失败。 FreespaceChecker A new data directory will be created. 一个新的数据目录将被创建。 name 名称 Directory already exists. Add %1 if you intend to create a new directory here. 目录已存在。如果您打算在这里创建一个新目录,添加 %1。 Path already exists, and is not a directory. 路径已存在,并且不是一个目录。 Cannot create data directory here. 无法在此创建数据目录。 HelpMessageDialog Bitcoin Core 比特币核心 version 版本 (%1-bit) (%1 位) About Bitcoin Core 关于比特币核心 Command-line options 命令行选项 Usage: 使用: command-line options 命令行选项 Intro Welcome 欢迎 Welcome to Bitcoin Core. 欢迎使用 比特币核心 程序。 As this is the first time the program is launched, you can choose where Bitcoin Core will store its data. 由于这是第一次运行 比特币核心 程序,您可以选择数据存储目录。 Bitcoin Core will download and store a copy of the Bitcoin block chain. At least %1GB of data will be stored in this directory, and it will grow over time. The wallet will also be stored in this directory. 比特币核心 程序会下载储存一份数据块链(blockchain)。至少需要 %1 GB的存储空间,随着时间推移会需要更多的存储空间。钱包文件也储存在该目录。 Use the default data directory 使用默认的数据目录 Use a custom data directory: 使用自定义的数据目录: Bitcoin Core 比特币核心 Error: Specified data directory "%1" cannot be created. 错误:无法创建 指定的数据目录 "%1" Error 错误 %n GB of free space available 有 %n GB 空闲空间 (of %n GB needed) (需要%n GB空间) OpenURIDialog Open URI 打开 URI Open payment request from URI or file 打开来自URI或文件的付款请求 URI: URI: Select payment request file 选择付款请求文件 Select payment request file to open 选择需要打开的付款请求文件 OptionsDialog Options 选项 &Main 主要(&M) Size of &database cache 数据库缓存大小(&D) MB MB Number of script &verification threads 脚本验证线程数(&V) Accept connections from outside 接收外部连接 Allow incoming connections 允许流入连接 IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1) 代理的 IP 地址 (例如 IPv4: 127.0.0.1 / IPv6: ::1) Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Exit in the menu. 窗口被关闭时最小化而不是退出应用程序。当此选项启用时,应用程序只会在菜单中选择退出时退出。 The user interface language can be set here. This setting will take effect after restarting Bitcoin Core. 可以在这里设置用户界面语言。此设置将在重新启动比特币核心后生效。 Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |. 出现在交易的选项卡的上下文菜单项的第三方网址 (例如:区块链接查询) 。 %s的URL被替换为交易哈希。多个的URL需要竖线 | 分隔。 Third party transaction URLs 第三方交易网址 Active command-line options that override above options: 有效的命令行参数覆盖上述选项: Reset all client options to default. 恢复客户端的缺省设置 &Reset Options 恢复缺省设置(&R) &Network 网络(&N) Automatically start Bitcoin Core after logging in to the system. 登录到系统后自动启动比特币核心。 &Start Bitcoin Core on system login 系统登录时启动比特币核心(&S) (0 = auto, <0 = leave that many cores free) (0 = 自动, <0 = 离开很多免费的核心) W&allet 钱包(&A) Expert 专家 Enable coin &control features 启动货币控制功能(&C) If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed. 如果禁用未确认的零钱,则零钱至少需要1个确认才能使用。同时账户余额计算会受到影响。 &Spend unconfirmed change 使用未经确认的零钱(&S) Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled. 自动在路由器中打开比特币端口。只有当您的路由器开启了 UPnP 选项时此功能才有效。 Map port using &UPnP 使用 &UPnP 映射端口 Connect to the Bitcoin network through a SOCKS5 proxy. 通过 SOCKS5 代理连接比特币网络。 &Connect through SOCKS5 proxy (default proxy): 通过 SO&CKS5 代理连接(默认代理): Proxy &IP: 代理服务器 &IP: &Port: 端口(&P): Port of the proxy (e.g. 9050) 代理端口(例如 9050) IPv4 IPv4 IPv6 IPv6 Tor Tor &Window 窗口(&W) Show only a tray icon after minimizing the window. 最小化窗口后仅显示托盘图标 &Minimize to the tray instead of the taskbar 最小化到托盘(&M) M&inimize on close 单击关闭按钮最小化(&I) &Display 显示(&D) User Interface &language: 用户界面语言(&L): &Unit to show amounts in: 比特币金额单位(&U): Choose the default subdivision unit to show in the interface and when sending coins. 选择比特币单位。 Whether to show coin control features or not. 是否需要交易源地址控制功能。 &OK 确定(&O) &Cancel 取消(&C) default 默认 none Confirm options reset 确认恢复缺省设置 Client restart required to activate changes. 更改生效需要重启客户端。 Client will be shut down. Do you want to proceed? 客户端即将关闭,您想继续吗? This change would require a client restart. 此更改需要重启客户端。 The supplied proxy address is invalid. 提供的代理服务器地址无效。 OverviewPage Form 表单 The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet. 现在显示的消息可能是过期的. 在连接上比特币网络节点后,您的钱包将自动与网络同步,但是这个过程还没有完成。 Watch-only: 查看-只有: Available: 可使用的余额: Your current spendable balance 您当前可使用的余额 Pending: 等待中的余额: Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance 尚未确认的交易总额,未计入当前余额 Immature: 未成熟的: Mined balance that has not yet matured 尚未成熟的挖矿收入余额 Balances 余额 Total: 总额: Your current total balance 您当前的总余额 Your current balance in watch-only addresses 您当前 观察地址(watch-only address)的余额 Spendable: 可使用: Recent transactions 最近交易记录 Unconfirmed transactions to watch-only addresses 观察地址(watch-only address)的未确认交易记录 Mined balance in watch-only addresses that has not yet matured 观察地址(watch-only address)中尚未成熟(matured)的挖矿收入余额: Current total balance in watch-only addresses 观察地址(watch-only address)中的当前总余额 PaymentServer URI handling URI 处理 Invalid payment address %1 无效的付款地址 %1 Payment request rejected 支付请求被拒绝 Payment request network doesn't match client network. 付款请求所在的网络与当前客户端所在的网络不匹配。 Payment request is not initialized. 支付请求未成形。 Requested payment amount of %1 is too small (considered dust). 请求支付的金额 %1 太小(就像尘埃)。 Payment request error 支付请求出错 Cannot start bitcoin: click-to-pay handler 暂时无法启动比特币:点击支付功能 Payment request fetch URL is invalid: %1 付款请求URI链接非法: %1 URI cannot be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters. URI无法解析!原因可能是比特币地址不正确,或者URI参数错误。 Payment request file handling 付款请求文件处理 Payment request file cannot be read! This can be caused by an invalid payment request file. 付款请求文件无法读取!可能是付款请求文件不合格。 Payment request expired. 支付请求已过期。 Unverified payment requests to custom payment scripts are unsupported. 不支持到自定义付款脚本的未验证付款请求。 Invalid payment request. 无效的支付请求。 Refund from %1 退款来自 %1 Payment request %1 is too large (%2 bytes, allowed %3 bytes). 支付请求 %1 太大 (%2 字节。只允许 %3 字节)。 Error communicating with %1: %2 %1: %2 通讯出错 Payment request cannot be parsed! 无法解析 付款请求! Bad response from server %1 来自 %1 服务器的错误响应 Payment acknowledged 支付已到账 Network request error 网络请求出错 PeerTableModel User Agent 用户代理 Node/Service 节点/服务 Ping Time Ping 时间 QObject Amount 金额 Enter a Bitcoin address (e.g. %1) 请输入一个比特币地址 (例如 %1) %1 d %1 天 %1 h %1 小时 %1 m %1 分钟 %1 s %1 秒 None N/A 不可用 %1 ms %1 毫秒 QRImageWidget &Save Image... 保存图片(&S)... &Copy Image 复制图片(&C) Save QR Code 保存二维码 PNG Image (*.png) PNG图片(*.png) RPCConsole Client name 客户端名称 N/A 不可用 Client version 客户端版本 &Information 信息 Debug window 调试窗口 General 常规 Using OpenSSL version 使用 OpenSSL 版本 Using BerkeleyDB version 使用的 BerkeleyDB 版本 Startup time 启动时间 Network 网络 Name 姓名 Number of connections 连接数 Block chain 数据链 Current number of blocks 当前数据块数量 Open the Bitcoin Core debug log file from the current data directory. This can take a few seconds for large log files. 从当前的数据目录打开比特币核心调试日志文件。对于较大的日志文件,这可能需要几秒钟。 Received 收到 Sent 发送 &Peers 同伴(&P) Select a peer to view detailed information. 选择节点查看详细信息。 Whitelisted 白名单 Direction 方向 Version 版本 Synced Headers 同步区块头 Synced Blocks 同步区块链 User Agent 用户代理 Services 服务 Ban Score 禁止得分 Connection Time 连接时间 Last Send 最后发送 Last Receive 最后接收 Ping Time Ping 时间 Time Offset 时间偏移 Last block time 上一数据块时间 &Open 打开(&O) &Console 控制台(&C) &Network Traffic 网络流量(&N) &Clear 清除(&C) Totals 总数 In: 输入: Out: 输出: Build date 创建时间 Debug log file 调试日志文件 Clear console 清空控制台 1 &hour 1 小时(&H) 1 &day 1 天(&D) 1 &week 1 周(&W) 1 &year 1 年(&Y) Welcome to the Bitcoin Core RPC console. 欢迎使用 比特币核心 RPC 控制台。 Use up and down arrows to navigate history, and <b>Ctrl-L</b> to clear screen. 使用上下方向键浏览历史, <b>Ctrl-L</b>清除屏幕。 Type <b>help</b> for an overview of available commands. 使用 <b>help</b> 命令显示帮助信息。 %1 B %1 字节 %1 KB %1 KB %1 MB %1 MB %1 GB %1 GB (node id: %1) (节点ID: %1) via %1 通过 %1 never 从未 Inbound 传入 Outbound 传出 Yes No Unknown 未知 ReceiveCoinsDialog &Amount: 总额(&A): &Label: 标签(&L): &Message: 消息(&M): Reuse one of the previously used receiving addresses. Reusing addresses has security and privacy issues. Do not use this unless re-generating a payment request made before. 重复使用以前用过的接收地址。重用地址有安全和隐私方面的隐患。除非是为重复生成同一项支付请求,否则请不要这样做。 R&euse an existing receiving address (not recommended) 重用现有的接收地址(不推荐) An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network. 可在付款请求上备注一条信息,在打开付款请求时可以看到。注意:该消息不是通过比特币网络传送。 An optional label to associate with the new receiving address. 可为新建的收款地址添加一个标签。 Use this form to request payments. All fields are <b>optional</b>. 使用此表单要求付款。所有字段都是<b>可选</b>。 An optional amount to request. Leave this empty or zero to not request a specific amount. 可选的请求金额。留空或填零为不要求具体金额。 Clear all fields of the form. 清除此表单的所有字段。 Clear 清除 Requested payments history 请求付款的历史 &Request payment 请求付款(&R) Show the selected request (does the same as double clicking an entry) 显示选中的请求 (双击也可以显示) Show 显示 Remove the selected entries from the list 从列表中移除选中的条目 Remove 移除 Copy label 复制标签 Copy message 复制消息 Copy amount 复制金额 ReceiveRequestDialog QR Code 二维码 Copy &URI 复制 URI(&U) Copy &Address 复制地址(&A) &Save Image... 保存图片(&S)... Request payment to %1 请求付款到 %1 Payment information 付款信息 URI URI Address 地址 Amount 金额 Label 标签 Message 消息 Resulting URI too long, try to reduce the text for label / message. URI 太长,请试着精简标签或消息文本。 Error encoding URI into QR Code. 将 URI 转为二维码失败。 RecentRequestsTableModel Date 日期 Label 标签 Message 消息 Amount 金额 (no label) (没有标签) (no message) (无消息) (no amount) (无金额) SendCoinsDialog Send Coins 发送比特币 Coin Control Features 交易源地址控制功能 Inputs... 输入... automatically selected 自动选择 Insufficient funds! 存款不足! Quantity: 总量: Bytes: 字节: Amount: 金额: Priority: 优先级: Fee: 费用: After Fee: 加上交易费用后: Change: 变更 : If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address. 如果激活该选项,但是零钱地址用光或者非法,将会新生成零钱地址,转入零钱。 Custom change address 自定义零钱地址 Transaction Fee: 交易费用: Choose... 选择... collapse fee-settings 收起 费用设置 per kilobyte 每kb If the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "total at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte. 如果自定义交易费设置为 1000聪而交易大小只有250字节,则“每千字节" 模式只支付250聪交易费, 而"最少"模式则支付1000聪。 大于1000字节的交易按每千字节付费。 Hide 隐藏 total at least 最小额 Paying only the minimum fee is just fine as long as there is less transaction volume than space in the blocks. But be aware that this can end up in a never confirming transaction once there is more demand for bitcoin transactions than the network can process. 交易量小时只支付最小交易费是可以的。但是请注意,当交易量大到超出网络可处理时您的交易可能永远无法确认。 (read the tooltip) (请注意提示信息) Recommended: 推荐: Custom: 自定义: (Smart fee not initialized yet. This usually takes a few blocks...) (智能交易费用 尚未初始化。 需要再下载一些数据块...) Confirmation time: 确认时间: normal 一般 fast 快速 Send as zero-fee transaction if possible 发送时尽可能 不支付交易费用 (confirmation may take longer) (确认时间更长) Send to multiple recipients at once 一次发送给多个接收者 Add &Recipient 添加收款人(&R) Clear all fields of the form. 清除此表单的所有字段。 Dust: 小额: Clear &All 清除所有(&A) Balance: 余额: Confirm the send action 确认发送货币 S&end 发送(&E) Confirm send coins 确认发送货币 %1 to %2 %1 到 %2 Copy quantity 复制金额 Copy amount 复制金额 Copy fee 复制交易费 Copy after fee 复制含交易费的金额 Copy bytes 复制字节 Copy priority 复制优先级 Copy change 复制零钱 or The amount to pay must be larger than 0. 支付金额必须大于0。 The amount exceeds your balance. 金额超出您的账上余额。 The total exceeds your balance when the %1 transaction fee is included. 计入 %1 交易费后的金额超出您的账上余额。 Transaction creation failed! 交易创建失败! The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. 错误:该交易被拒绝!发生这种错误的原因可能是:钱包中的比特币已经被用掉,有可能您复制了wallet.dat钱包文件,然后用复制的钱包文件支付了比特币,但是这个钱包文件中没有记录。 A fee higher than %1 is considered an absurdly high fee. 超过 %1 的交易费被认为是荒谬的高费率。 Payment request expired. 支付请求已过期。 Estimated to begin confirmation within %n block(s). 预计 %n 个数据块后被确认。 The recipient address is not valid. Please recheck. 接收人地址无效。请重新检查。 Duplicate address found: addresses should only be used once each. 发现重复地址:每个地址应该只使用一次。 Warning: Invalid Bitcoin address 警告:无效的比特币地址 (no label) (没有标签) Warning: Unknown change address 警告:未知的更改地址 Copy dust 复制小额 Are you sure you want to send? 您确定要发出吗? added as transaction fee 已添加交易费 SendCoinsEntry A&mount: 金额(&M) Pay &To: 付给(&T): Enter a label for this address to add it to your address book 为这个地址输入一个标签,以便将它添加到您的地址簿 &Label: 标签(&L): Choose previously used address 选择以前用过的地址 This is a normal payment. 这是笔正常的支付。 The Bitcoin address to send the payment to 付款目的地址 Alt+A Alt+A Paste address from clipboard 从剪贴板粘贴地址 Alt+P Alt+P Remove this entry 移除此项 The fee will be deducted from the amount being sent. The recipient will receive less bitcoins than you enter in the amount field. If multiple recipients are selected, the fee is split equally. 交易费将从发送总额中扣除。接收人将收到比您在金额框中输入的更少的比特币。如果选中了多个收件人,交易费平分。 S&ubtract fee from amount 从金额中减去交易费(&U) Message: 消息: This is an unauthenticated payment request. 这是一个未经验证的支付请求。 This is an authenticated payment request. 这是一个已经验证的支付请求。 Enter a label for this address to add it to the list of used addresses 请为此地址输入一个标签以将它加入用过的地址列表 A message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network. bitcoin:URI 附带的备注信息,将会和交易一起存储,备查。 注意:该消息不会通过比特币网络传输。 Pay To: 支付给: Memo: 便条: ShutdownWindow Bitcoin Core is shutting down... 比特币核心正在关机... Do not shut down the computer until this window disappears. 在此窗口消失前不要关闭计算机。 SignVerifyMessageDialog Signatures - Sign / Verify a Message 签名 - 为消息签名/验证签名消息 &Sign Message 签名消息(&S) You can sign messages/agreements with your addresses to prove you can receive bitcoins sent to them. Be careful not to sign anything vague or random, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. 您可以用你的地址对消息/协议进行签名,以证明您可以接收发送到该地址的比特币。注意不要对任何模棱两可或者随机的消息进行签名,以免遭受钓鱼式攻击。请确保消息内容准确的表达了您的真实意愿。 The Bitcoin address to sign the message with 用来对消息签名的地址 Choose previously used address 选择以前用过的地址 Alt+A Alt+A Paste address from clipboard 从剪贴板粘贴地址 Alt+P Alt+P Enter the message you want to sign here 请输入您要发送的签名消息 Signature 签名 Copy the current signature to the system clipboard 复制当前签名至剪切板 Sign the message to prove you own this Bitcoin address 签名消息,证明这个地址属于您。 Sign &Message 消息签名(&M) Reset all sign message fields 清空所有签名消息栏 Clear &All 清除所有(&A) &Verify Message 验证消息(&V) Enter the receiver's address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Note that this only proves the signing party receives with the address, it cannot prove sendership of any transaction! 请在下面输入接收者地址、消息(确保换行符、空格符、制表符等完全相同)和签名以验证消息。请仔细核对签名信息,以提防中间人攻击。请注意,这只是证明接收方签名的地址,它不能证明任何交易! The Bitcoin address the message was signed with 消息使用的签名地址 Verify the message to ensure it was signed with the specified Bitcoin address 验证消息,确保消息是由指定的比特币地址签名过的。 Verify &Message 验证消息签名(&M) Reset all verify message fields 清空所有验证消息栏 Click "Sign Message" to generate signature 单击“签名消息“产生签名。 The entered address is invalid. 输入的地址非法。 Please check the address and try again. 请检查地址后重试。 The entered address does not refer to a key. 输入的地址没有关联的公私钥对。 Wallet unlock was cancelled. 钱包解锁动作取消。 Private key for the entered address is not available. 找不到输入地址关联的私钥。 Message signing failed. 消息签名失败。 Message signed. 消息已签名。 The signature could not be decoded. 签名无法解码。 Please check the signature and try again. 请检查签名后重试。 The signature did not match the message digest. 签名与消息摘要不匹配。 Message verification failed. 消息验证失败。 Message verified. 消息验证成功。 SplashScreen Bitcoin Core 比特币核心 The Bitcoin Core developers Bitcoin Core 的开发者 [testnet] [测试网络] TrafficGraphWidget KB/s KB/s TransactionDesc Open until %1 至 %1 个数据块时开启 conflicted 发现冲突 %1/offline %1 / 离线 %1/unconfirmed %1/未确认 %1 confirmations %1 已确认 Status 状态 , broadcast through %n node(s) , 通过 %n 个节点广播 Date 日期 Source Generated 生成 From 来自 To own address 自己的地址 watch-only 观察地址(watch-only) label 标签 Credit 收入 matures in %n more block(s) %n 个数据块后成熟(mature) not accepted 未被接受 Debit 支出 Total debit 总收入 Total credit 总支出 Transaction fee 交易费 Net amount 净额 Message 消息 Comment 备注 Transaction ID ID Merchant 商店 Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours. 生成的比特币在可以使用前必须有 %1 个成熟的区块。当您生成了此区块后,它将被广播到网络中以加入区块链。如果它未成功进入区块链,其状态将变更为“不接受”并且不可使用。这可能偶尔会发生,如果另一个节点比你早几秒钟成功生成一个区块。 Debug information 调试信息 Transaction 交易 Inputs 输入 Amount 金额 true 正确 false 错误 , has not been successfully broadcast yet ,未被成功广播 Open for %n more block(s) 再打开 %n 个数据块 unknown 未知 TransactionDescDialog Transaction details 交易细节 This pane shows a detailed description of the transaction 当前面板显示了交易的详细信息 TransactionTableModel Date 日期 Type 类别 Immature (%1 confirmations, will be available after %2) 未成熟 (%1 个确认,将在 %2 个后可用) Open for %n more block(s) 再打开 %n 个数据块 Open until %1 至 %1 个数据块时开启 Confirmed (%1 confirmations) 已确认 (%1 条确认信息) This block was not received by any other nodes and will probably not be accepted! 此数据块未被任何其他节点接收,可能不被接受! Generated but not accepted 已生成但未被接受 Offline 掉线 Label 标签 Unconfirmed 未确认的 Confirming (%1 of %2 recommended confirmations) 确认中 (推荐 %2个确认,已经有 %1个确认) Conflicted 冲突的 Received with 接收于 Received from 收款来自 Sent to 发送给 Payment to yourself 付款给自己 Mined 挖矿所得 watch-only 观察地址(watch-only) (n/a) (不可用) Transaction status. Hover over this field to show number of confirmations. 交易状态。 鼠标移到此区域可显示确认项数量。 Date and time that the transaction was received. 接收到交易的时间 Type of transaction. 交易类别。 Whether or not a watch-only address is involved in this transaction. 该交易中是否涉及 观察地址(watch-only address)。 User-defined intent/purpose of the transaction. 用户定义的该交易的意图/目的。 Amount removed from or added to balance. 从余额添加或移除的金额。 TransactionView All 全部 Today 今天 This week 本周 This month 本月 Last month 上月 This year 今年 Range... 范围... Received with 接收于 Sent to 发送给 To yourself 到自己 Mined 挖矿所得 Other 其他 Enter address or label to search 输入地址或标签进行搜索 Min amount 最小金额 Copy address 复制地址 Copy label 复制标签 Copy amount 复制金额 Copy transaction ID 复制交易编号 Edit label 编辑标签 Show transaction details 显示交易详情 Export Transaction History 导出交易历史 Watch-only 观察地址(Watch-only) Exporting Failed 导出失败 There was an error trying to save the transaction history to %1. 导出交易历史到 %1 时发生错误。 Exporting Successful 导出成功 The transaction history was successfully saved to %1. 交易历史已成功保存到 %1。 Comma separated file (*.csv) 逗号分隔文件 (*.csv) Confirmed 已确认 Date 日期 Type 类别 Label 标签 Address 地址 ID ID Range: 范围: to UnitDisplayStatusBarControl Unit to show amounts in. Click to select another unit. 金额单位。单击选择别的单位。 WalletFrame No wallet has been loaded. 没有载入钱包。 WalletModel Send Coins 发送比特币 WalletView &Export 导出(&E) Export the data in the current tab to a file 导出当前数据到文件 Backup Wallet 备份钱包 Wallet Data (*.dat) 钱包文件(*.dat) Backup Failed 备份失败 There was an error trying to save the wallet data to %1. 尝试保存钱包数据至 %1 时发生错误。 The wallet data was successfully saved to %1. 钱包数据成功保存至 %1 。 Backup Successful 备份成功 bitcoin-core Options: 选项: Specify data directory 指定数据目录 Connect to a node to retrieve peer addresses, and disconnect 连接一个节点并获取对端地址,然后断开连接 Specify your own public address 指定您的公共地址 Accept command line and JSON-RPC commands 接受命令行和 JSON-RPC 命令 Error: A fatal internal error occurred, see debug.log for details 错误:发生了致命的内部错误,详情见 debug.log 文件 Pruning blockstore... 正在修剪区块存储... Run in the background as a daemon and accept commands 在后台运行并接受命令 Accept connections from outside (default: 1 if no -proxy or -connect) 接受来自外部的连接 (缺省: 如果不带 -proxy or -connect 参数设置为1) Bind to given address and always listen on it. Use [host]:port notation for IPv6 绑定指定的IP地址开始监听。IPv6地址请使用[host]:port 格式 Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup 删除钱包的所有交易记录,且只有用 -rescan参数启动客户端才能重新取回交易记录 Distributed under the MIT software license, see the accompanying file COPYING or <http://www.opensource.org/licenses/mit-license.php>. Distributed under the MIT software license, see the accompanying file COPYING or <http://www.opensource.org/licenses/mit-license.php>. Execute command when a wallet transaction changes (%s in cmd is replaced by TxID) 当最佳区块变化时执行命令 (命令行中的 %s 会被替换成区块哈希值) Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d) 设置脚本验证的程序 (%u 到 %d, 0 = 自动, <0 = 保留自由的核心, 默认值: %d) This is a pre-release test build - use at your own risk - do not use for mining or merchant applications 这是测试用的预发布版本 - 请谨慎使用 - 不要用来挖矿,或者在正式商用环境下使用 Unable to bind to %s on this computer. Bitcoin Core is probably already running. 无法 %s的绑定到电脑上,比特币核心钱包可能已经在运行。 WARNING: abnormally high number of blocks generated, %d blocks received in the last %d hours (%d expected) 警告:数据块生成数量异常,最近 %d 小时收到了 %d 个数据块(预期为 %d 个) WARNING: check your network connection, %d blocks received in the last %d hours (%d expected) 警告:请检查您的网络连接,最近 %d 小时收到了 %d 个数据块(预期为 %d 个) Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues. 警告:网络似乎并不完全同意!有些矿工似乎遇到了问题。 Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade. 警告:我们的同行似乎不完全同意!您可能需要升级,或者其他节点可能需要升级。 Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup. 警告:钱包文件wallet.dat损坏! 原始的钱包文件已经备份到%s目录下并重命名为{timestamp}.bak 。如果您的账户余额或者交易记录不正确,请使用您的钱包备份文件恢复。 Whitelist peers connecting from the given netmask or IP address. Can be specified multiple times. 节点白名单,网络掩码或IP址。可多次指定。 (default: 1) (默认值: 1) <category> can be: <category> 可能是: Block creation options: 数据块创建选项: Connect only to the specified node(s) 仅连接到指定节点 Connection options: 连接选项: Corrupted block database detected 检测发现数据块数据库损坏。请使用 -reindex参数重启客户端。 Debugging/Testing options: 调试/测试选项: Do not load the wallet and disable wallet RPC calls 不要加载钱包和禁用钱包的 RPC 调用 Do you want to rebuild the block database now? 你想现在就重建块数据库吗? Error initializing block database 初始化数据块数据库出错 Error initializing wallet database environment %s! Error initializing wallet database environment %s! Error loading block database 导入数据块数据库出错 Error opening block database 导入数据块数据库出错 Error: Disk space is low! 错误:磁盘剩余空间低! Failed to listen on any port. Use -listen=0 if you want this. 监听端口失败。请使用 -listen=0 参数。 Importing... 导入中... Incorrect or no genesis block found. Wrong datadir for network? 不正确或没有找到起源区块。网络错误? Invalid -onion address: '%s' 无效的 -onion 地址:“%s” Not enough file descriptors available. 没有足够的文件描述符可用。 Only connect to nodes in network <net> (ipv4, ipv6 or onion) 只连接 <net>网络中的节点 (ipv4, ipv6 或 onion) Prune cannot be configured with a negative value. 修剪不能配置一个负数。 Prune mode is incompatible with -txindex. 修剪模式与 -txindex 不兼容。 Set database cache size in megabytes (%d to %d, default: %d) 设置以MB为单位的数据库缓存大小(%d 到 %d, 默认值: %d) Set maximum block size in bytes (default: %d) 设置最大区块大小 (默认: %d,单位字节) Specify wallet file (within data directory) 指定钱包文件(数据目录内) Use UPnP to map the listening port (default: %u) 使用UPnp映射监听端口 (默认: %u) Verifying blocks... 正在验证数据库的完整性... Verifying wallet... 正在检测钱包的完整性... Wallet %s resides outside data directory %s 钱包 %s 在外部的数据目录 %s Wallet options: 钱包选项: Warning: This version is obsolete; upgrade required! 警告:此版本已过时,必须升级! You need to rebuild the database using -reindex to change -txindex 您需要将 -reindex 改为 -txindex 以重建数据库 Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times 允许来自指定地址的 JSON-RPC 连接。 <ip>为单一IP (如: 1.2.3.4), 网络/掩码 (如: 1.2.3.4/255.255.255.0), 网络/CIDR (如: 1.2.3.4/24)。该选项可多次指定。 Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6 绑定到指定地址和连接的白名单节点。 IPv6使用 [主机]:端口 格式 Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6. This option can be specified multiple times (default: bind to all interfaces) 绑定到指定地址监听 JSON-RPC连接。 IPv6使用[主机]:端口 格式。该选项可多次指定 (默认: 绑定到所有接口) Cannot obtain a lock on data directory %s. Bitcoin Core is probably already running. 无法获取数据目录的 %s. 比特币核心钱包可能已经在运行. Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality) 创建系统默认权限的文件,而不是 umask 077 (只在关闭钱包功能时有效) Discover own IP addresses (default: 1 when listening and no -externalip or -proxy) 发现自己的 IP 地址(默认: 监听并且无 -externalip 或 -proxy 时为 1) Error: Listening for incoming connections failed (listen returned error %s) 错误:监听外部连接失败 (监听返回错误 %s) Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message) 当收到相关提醒或者我们看到一个长分叉时执行命令(%s 将替换为消息) If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u) 如果未设置交易费用,自动添加足够的交易费以确保交易在平均n个数据块内被确认 (默认: %u) Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions) -maxtxfee=<amount>: '%s' 的金额无效(交易费至少为 %s,以免交易滞留过久) Maximum size of data in data carrier transactions we relay and mine (default: %u) Maximum size of data in data carrier transactions we relay and mine (default: %u) Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect) 通过DNS查询每个地址,如果短地址 (默认值: 1 除非 -连接) Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u) 为每个代理连接随机化凭据。这将启用 Tor 流隔离 (默认: %u) Set maximum size of high-priority/low-fee transactions in bytes (default: %d) 设置 高优先级/低交易费 交易的最大字节 (缺省: %d) Set the number of threads for coin generation if enabled (-1 = all cores, default: %d) 设置比特币生成线程数 ( -1=所有核, 默认: %d) The transaction amount is too small to send after the fee has been deducted 在交易费被扣除后发送的交易金额太小 This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit <https://www.openssl.org/> and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit <https://www.openssl.org/> and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard. Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway 白名单节点不能被DoS banned ,且转发所有来自他们的交易(即便这些交易已经存在于mempool中),常用于网关 You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain 您需要使用 -reindex 重新构建数据库以返回未修剪的模式。这将重新下载整个区块链 (default: %u) (默认: %u) Accept public REST requests (default: %u) 接受公共 REST 请求 (默认: %u) Activating best chain... 正在激活最佳数据链... Cannot resolve -whitebind address: '%s' 无法解析 -whitebind 地址: '%s' Choose data directory on startup (default: 0) 在启动时选择数据目录(默认:0) Connect through SOCKS5 proxy 通过 SOCKS5 代理连接 Copyright (C) 2009-%i The Bitcoin Core Developers 版权所有 (C) 2009-%i Bitcoin Core 开发者 Error loading wallet.dat: Wallet requires newer version of Bitcoin Core 加载wallet.dat错误:需要新版的比特币核心钱包 Error reading from database, shutting down. 读取数据库出错,关闭中。 Information 信息 Initialization sanity check failed. Bitcoin Core is shutting down. 初始化完整性检查失败。Bitcoin Core 即将关闭。 Invalid amount for -maxtxfee=<amount>: '%s' -maxtxfee=<amount>: '%s' 的金额无效 Invalid amount for -minrelaytxfee=<amount>: '%s' -minrelaytxfee=<amount>: '%s' 无效的金额 Invalid amount for -mintxfee=<amount>: '%s' -mintxfee=<amount>: '%s' 无效的金额 Invalid amount for -paytxfee=<amount>: '%s' (must be at least %s) 无效的金额 -paytxfee=<amount>: '%s' (必须至少为 %s) Invalid netmask specified in -whitelist: '%s' -whitelist: '%s' 指定的网络掩码无效 Need to specify a port with -whitebind: '%s' -whitebind: '%s' 需要指定一个端口 Node relay options: 节点中继选项: RPC server options: RPC 服务器选项: Rebuild block chain index from current blk000??.dat files on startup 启动时重新为当前的 blk000??.dat 文件建立索引 Receive and display P2P network alerts (default: %u) 收到并且显示P2P网络的告警(默认:%u) Send trace/debug info to console instead of debug.log file 跟踪/调试信息输出到控制台,不输出到 debug.log 文件 Send transactions as zero-fee transactions if possible (default: %u) 发送时尽可能 不支付交易费用 (默认: %u) Set SSL root certificates for payment request (default: -system-) 设置SSL根证书的付款请求(默认:-系统-) Set language, for example "de_DE" (default: system locale) 设置语言, 例如“zh-TW”(默认为系统语言) Show all debugging options (usage: --help -help-debug) 显示所有调试选项 (用法: --帮助 -帮助调试) Show splash screen on startup (default: 1) 启动时显示版权页 (缺省: 1) Shrink debug.log file on client startup (default: 1 when no -debug) 客户端启动时压缩debug.log文件(缺省:no-debug模式时为1) Signing transaction failed 签署交易失败 Start minimized 启动时最小化 The transaction amount is too small to pay the fee 交易金额太小,不足以支付交易费 This is experimental software. 这是实验性的软件。 Transaction amount too small 交易量太小 Transaction amounts must be positive 交易金额必须是积极的 Transaction too large for fee policy 费用策略的交易太大 Transaction too large 交易太大 UI Options: 界面选项: Unable to bind to %s on this computer (bind returned error %s) 无法在此计算机上绑定 %s (绑定返回错误 %s) Username for JSON-RPC connections JSON-RPC 连接用户名 Wallet needed to be rewritten: restart Bitcoin Core to complete 钱包需要被改写:重新启动核心钱包来完成 Warning 警告 Zapping all transactions from wallet... Zapping all transactions from wallet... ZeroMQ notification options: ZeroMQ 通知选项: wallet.dat corrupt, salvage failed 钱包文件wallet.dat损坏,抢救备份失败 Password for JSON-RPC connections JSON-RPC 连接密码 Execute command when the best block changes (%s in cmd is replaced by block hash) 当最佳数据块变化时执行命令 (命令行中的 %s 会被替换成数据块哈希值) This help message 本帮助信息 Allow DNS lookups for -addnode, -seednode and -connect 使用 -addnode, -seednode 和 -connect 选项时允许查询DNS Loading addresses... 正在加载地址簿... Error loading wallet.dat: Wallet corrupted wallet.dat 钱包文件加载出错:钱包损坏 (1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data) (1 = 保留 tx meta data , 如 account owner 和 payment request information, 2 = 不保留 tx meta data) How thorough the block verification of -checkblocks is (0-4, default: %u) 数据块验证 严密级别 -checkblocks (0-4, 默认: %u) Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u) 维护一份完整的交易索引, 用于 getrawtransaction RPC调用 (默认: %u) Number of seconds to keep misbehaving peers from reconnecting (default: %u) 限制 非礼节点 若干秒内不能连接 (默认: %u) Output debugging information (default: %u, supplying <category> is optional) 输出调试信息 (默认: %u, 提供 <category> 是可选项) Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s) 通过Tor隐藏服务连接节点时 使用不同的SOCKS5代理 (默认: %s) (default: %s) (默认: %s) Error loading wallet.dat wallet.dat 钱包文件加载出错 Generate coins (default: %u) 生成比特币 (默认: %u) How many blocks to check at startup (default: %u, 0 = all) 启动时检测多少个数据块(默认: %u, 0=所有) Include IP addresses in debug output (default: %u) 在调试输出中包含IP地址 (默认: %u) Invalid -proxy address: '%s' 无效的代理地址:%s Listen for JSON-RPC connections on <port> (default: %u or testnet: %u) 使用 <port>端口监听 JSON-RPC 连接 (默认: %u ; testnet: %u) Listen for connections on <port> (default: %u or testnet: %u) 使用端口 <port> 监听连接 (默认: %u ; testnet: %u) Maintain at most <n> connections to peers (default: %u) 保留最多 <n> 条节点连接 (默认: %u) Make the wallet broadcast transactions 钱包广播事务处理 Maximum per-connection receive buffer, <n>*1000 bytes (default: %u) 每个连接的最大接收缓存,<n>*1000 字节 (默认: %u) Maximum per-connection send buffer, <n>*1000 bytes (default: %u) 每个连接的最大发送缓存,<n>*1000 字节 (默认: %u) Prepend debug output with timestamp (default: %u) 输出调试信息时,前面加上时间戳 (默认: %u) Relay and mine data carrier transactions (default: %u) Relay and mine data carrier transactions (default: %u) Relay non-P2SH multisig (default: %u) 是否转发 非P2SH格式的多签名交易 (默认: %u) Set key pool size to <n> (default: %u) 设置私钥池大小为 <n> (默认:%u) Set minimum block size in bytes (default: %u) 设置数据块 最小字节数 (默认: %u) Set the number of threads to service RPC calls (default: %d) 设置RPC服务线程数 (默认: %d) Specify configuration file (default: %s) 指定配置文件 (默认: %s) Specify connection timeout in milliseconds (minimum: 1, default: %d) 指定连接超时毫秒数 (最小: 1, 默认: %d) Specify pid file (default: %s) 指定 pid 文件 (默认: %s) Spend unconfirmed change when sending transactions (default: %u) 付款时允许使用未确认的零钱 (默认: %u) Threshold for disconnecting misbehaving peers (default: %u) 断开 非礼节点的阀值 (默认: %u) Unknown network specified in -onlynet: '%s' -onlynet 指定的是未知网络:%s Cannot resolve -bind address: '%s' 无法解析 -bind 端口地址: '%s' Cannot resolve -externalip address: '%s' 无法解析 -externalip 地址: '%s' Invalid amount for -paytxfee=<amount>: '%s' 非法金额 -paytxfee=<amount>: '%s' Insufficient funds 金额不足 Loading block index... 正在加载数据块索引... Add a node to connect to and attempt to keep the connection open 添加节点并与其保持连接 Loading wallet... 正在加载钱包... Cannot downgrade wallet 无法降级钱包 Cannot write default address 无法写入默认地址 Rescanning... 正在重新扫描... Done loading 加载完成 Error 错误