AddressBookPage Double-click to edit address or label 双击编辑地址或标签 Create a new address 创建新地址 &New 新建(&N) Copy the currently selected address to the system clipboard 复制当前选中的地址到系统剪贴板 &Copy 复制(&C) C&lose 关闭(&C) &Copy Address 复制地址(&C) Delete the currently selected address from the list 从列表中删除选中的地址 Export the data in the current tab to a file 导出当前数据到文件 &Export 导出(&E) &Delete 删除(&D) Choose the address to send coins to 选择发款地址 Choose the address to receive coins with 选择收款地址 C&hoose 选择(&H) Sending addresses 正在发送地址 Receiving addresses 正在接收地址 These are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins. 这是您用来付款的比特币地址。在付款前，请总是核实付款金额和收款地址。 These are your Bitcoin addresses for receiving payments. It is recommended to use a new receiving address for each transaction. 这些都是您的比特币地址，可用于收款。建议对每笔交易都使用一个新的地址。 Copy &Label 复制标签(&L) &Edit 编辑(&E) Export Address List 导出地址列表 Comma separated file (*.csv) 逗号分隔文件 (*.csv) Exporting Failed 导出失败 There was an error trying to save the address list to %1. Please try again. 保存地址列表出现 %1错误。请重试。 AddressTableModel Label 标签 Address 地址 (no label) (没有标签) AskPassphraseDialog Passphrase Dialog 密码对话框 Enter passphrase 输入密码 New passphrase 新密码 Repeat new passphrase 重复新密码 Encrypt wallet 钱包加密 This operation needs your wallet passphrase to unlock the wallet. 此操作需要您首先使用密码解锁该钱包。 Unlock wallet 解锁钱包 This operation needs your wallet passphrase to decrypt the wallet. 该操作需要您首先使用密码解密钱包。 Decrypt wallet 解密钱包 Change passphrase 更改密码 Enter the old and new passphrase to the wallet. 请输入该钱包的旧密码与新密码。 Confirm wallet encryption 确认加密钱包 Warning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR BITCOINS</b>! 警告：如果您加密了您的钱包，但是忘记了密码，你将会<b>丢失所有的比特币</b>！ Are you sure you wish to encrypt your wallet? 您确定需要为钱包加密吗？ IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet. 重要提示：您以前备份的钱包文件应该替换成最新生成的加密钱包文件（重新备份）。从安全性上考虑，您以前备份的未加密的钱包文件，在您使用新的加密钱包后将无效，请重新备份。 Warning: The Caps Lock key is on! 警告：大写锁定键处于打开状态！ Wallet encrypted 钱包已加密 Bitcoin will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer. 比特币客户端将关闭软件以完成加密过程。请您谨记：钱包加密并不是万能的，电脑中毒等原因仍可能导致您的比特币意外丢失。 Wallet encryption failed 钱包加密失败 Wallet encryption failed due to an internal error. Your wallet was not encrypted. 由于一个本地错误，加密钱包的操作已经失败。您的钱包没能被加密。 The supplied passphrases do not match. 密码不匹配。 Wallet unlock failed 钱包解锁失败 The passphrase entered for the wallet decryption was incorrect. 用于解密钱包的密码不正确。 Wallet decryption failed 钱包解密失败。 Wallet passphrase was successfully changed. 修改钱包密码成功。 BitcoinGUI Sign &message... 消息签名(&M)... Synchronizing with network... 正在与网络同步... &Overview 概况(&O) Node 节点 Show general overview of wallet 显示钱包概况 &Transactions 交易记录(&T) Browse transaction history 查看交易历史 E&xit 退出(&X) Quit application 退出程序 About &Qt 关于 &Qt Show information about Qt 显示 Qt 相关信息 &Options... 选项(&O)... &Encrypt Wallet... 加密钱包(&E)... &Backup Wallet... 备份钱包(&B)... &Change Passphrase... 更改密码(&C)... &Sending addresses... &付款地址 &Receiving addresses... &收款地址 Open &URI... 打开 &URI... Bitcoin Core client 比特币核心钱包 Importing blocks from disk... 正在从磁盘导入数据块... Reindexing blocks on disk... 正在为数据块建立索引... Send coins to a Bitcoin address 向一个比特币地址发送比特币 Modify configuration options for Bitcoin 设置选项 Backup wallet to another location 备份钱包到其他文件夹 Change the passphrase used for wallet encryption 更改钱包加密口令 &Debug window 调试窗口(&D) Open debugging and diagnostic console 打开调试和诊断控制台 &Verify message... 验证消息(&V)... Bitcoin 比特币 Wallet 钱包 &Send 发送(&S) &Receive 接收(&R) Show information about Bitcoin Core 显示有关比特币核心钱包信息 &Show / Hide 显示 / 隐藏(&S) Show or hide the main Window 显示或隐藏主窗口 Encrypt the private keys that belong to your wallet 对钱包中的私钥加密 Sign messages with your Bitcoin addresses to prove you own them 用比特币地址关联的私钥为消息签名，以证明您拥有这个比特币地址 Verify messages to ensure they were signed with specified Bitcoin addresses 校验消息，确保该消息是由指定的比特币地址所有者签名的 &File 文件(&F) &Settings 设置(&S) &Help 帮助(&H) Tabs toolbar 分页工具栏 Bitcoin Core 比特币核心 Request payments (generates QR codes and bitcoin: URIs) 请求支付（生成二维码和 bitcoin: URI） &About Bitcoin Core 关于比特币核心(&A) Show the list of used sending addresses and labels 显示用过的发送地址和标签的列表 Show the list of used receiving addresses and labels 显示用过的接收地址和标签的列表 Open a bitcoin: URI or payment request 打开一个比特币：URI 或支付请求 &Command-line options &命令行 选项 Show the Bitcoin Core help message to get a list with possible Bitcoin command-line options 显示比特币核心 程序帮助信息，获取可用的命令行选项 %n active connection(s) to Bitcoin network %n 个到比特币网络的活动连接 No block source available... 沒有可用的区块来源... %n hour(s) %n 小时 %n day(s) %n 天 %n week(s) %n 周 %1 and %2 %1 和 %2 %n year(s) %n 年 %1 behind 落后 %1 Last received block was generated %1 ago. 最新收到的区块产生于 %1。 Transactions after this will not yet be visible. 在此之后的交易尚未可见 Error 错误 Warning 警告 Information 信息 Up to date 已是最新 Catching up... 更新中... Sent transaction 发送交易 Incoming transaction 流入交易 Date: %1 Amount: %2 Type: %3 Address: %4 日期: %1 金额: %2 类别: %3 地址: %4 Wallet is <b>encrypted</b> and currently <b>unlocked</b> 钱包已被<b>加密</b>，当前为<b>解锁</b>状态 Wallet is <b>encrypted</b> and currently <b>locked</b> 钱包已被<b>加密</b>，当前为<b>锁定</b>状态 ClientModel Network Alert 网络警报 CoinControlDialog Quantity: 总量： Bytes: 字节： Amount: 金额： Priority: 优先级： Fee: 费用： Dust: 小额： After Fee: 加上交易费用后: Change: 变更 : (un)select all (不)全选 Tree mode 树状模式 List mode 列表模式 Amount 金额 Date 日期 Confirmations 确认 Confirmed 已确认 Priority 优先级 Copy address 复制地址 Copy label 复制标签 Copy amount 复制金额 Copy transaction ID 复制交易编号 Lock unspent 锁定未花费 Unlock unspent 解锁未花费 Copy quantity 复制金额 Copy fee 复制交易费 Copy after fee 复制含交易费的金额 Copy bytes 复制字节 Copy priority 复制优先级 Copy dust 复制小额 Copy change 复制零钱 highest 最高 higher 更高 high 高 medium-high 中高 medium 中等 low-medium 中低 low 低 lower 更低 lowest 最低 (%1 locked) (%1 锁定) none 无 yes 是 no 否 This label turns red, if the transaction size is greater than 1000 bytes. 如果这笔交易大于1000字节，标签会变成红色。 This means a fee of at least %1 per kB is required. 这意味着将对交易收取 %1/千字节 的交易费。 Can vary +/- 1 byte per input. 每笔输入可能会有 正负1字节的偏差。 Transactions with higher priority are more likely to get included into a block. 交易的优先级越高，被矿工收入数据块的速度也越快。 This label turns red, if the priority is smaller than "medium". 如果优先级小于"中位数" ，标签将变成红色。 This label turns red, if any recipient receives an amount smaller than %1. 如果收款地址收到小于%1的比特币，标签将变成红色。 (no label) (没有标签) change from %1 (%2) 来自%1的零钱 (%2) (change) (零钱) EditAddressDialog Edit Address 编辑地址 &Label 标签(&L) The label associated with this address list entry 与此地址相关的标签项 The address associated with this address list entry. This can only be modified for sending addresses. 该地址已与地址列表中的条目关联，只能被发送地址修改。 &Address 地址(&A) New receiving address 新建接收地址 New sending address 新建发送地址 Edit receiving address 编辑接收地址 Edit sending address 编辑发送地址 The entered address "%1" is already in the address book. 输入的地址“%1”已经存在于地址簿中。 The entered address "%1" is not a valid Bitcoin address. 您输入的“%1”不是有效的比特币地址。 Could not unlock wallet. 无法解锁钱包 New key generation failed. 新的密钥生成失败。 FreespaceChecker A new data directory will be created. 一个新的数据目录将被创建。 name 名称 Directory already exists. Add %1 if you intend to create a new directory here. 目录已存在。如果您打算在这里创建一个新目录，添加 %1。 Path already exists, and is not a directory. 路径已存在，并且不是一个目录。 Cannot create data directory here. 无法在此创建数据目录。 HelpMessageDialog Bitcoin Core 比特币核心 version 版本 (%1-bit) (%1 位) About Bitcoin Core 关于比特币核心 Command-line options 命令行选项 Usage: 使用： command-line options 命令行选项 UI options UI选项 Set language, for example "de_DE" (default: system locale) 设置语言, 例如“zh-TW”（默认为系统语言） Start minimized 启动时最小化 Set SSL root certificates for payment request (default: -system-) 设置SSL根证书的付款请求(默认：-系统-) Show splash screen on startup (default: 1) 启动时显示版权页 (缺省: 1) Choose data directory on startup (default: 0) 在启动时选择数据目录（默认：0） Intro Welcome 欢迎 Welcome to Bitcoin Core. 欢迎使用 比特币核心 程序。 As this is the first time the program is launched, you can choose where Bitcoin Core will store its data. 由于这是第一次运行 比特币核心 程序，您可以选择数据存储目录。 Bitcoin Core will download and store a copy of the Bitcoin block chain. At least %1GB of data will be stored in this directory, and it will grow over time. The wallet will also be stored in this directory. 比特币核心 程序会下载储存一份数据块链(blockchain)。至少需要 %1 GB的存储空间，随着时间推移会需要更多的存储空间。钱包文件也储存在该目录。 Use the default data directory 使用默认的数据目录 Use a custom data directory: 使用自定义的数据目录： Bitcoin Core 比特币核心 Error 错误 OpenURIDialog Open URI 打开 URI Open payment request from URI or file 打开来自URI或文件的付款请求 URI: URI: Select payment request file 选择付款请求文件 Select payment request file to open 选择需要打开的付款请求文件 OptionsDialog Options 选项 &Main 主要(&M) Automatically start Bitcoin after logging in to the system. 登录系统后自动开启比特币客户端 &Start Bitcoin on system login 系统启动时运行(&S) Size of &database cache 数据库缓存大小(&D) MB MB Number of script &verification threads 脚本&验证 进程数 Accept connections from outside 接收外部连接 Allow incoming connections 允许流入连接 IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1) 代理的 IP 地址 (例如 IPv4: 127.0.0.1 / IPv6: ::1) Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |. 出现在交易的选项卡的上下文菜单项的第三方网址 (例如：区块链接查询) 。 %s的URL被替换为交易哈希。多个的URL需要竖线 | 分隔。 Third party transaction URLs 第三方交易网址 Active command-line options that override above options: 有效的命令行参数覆盖上述选项: Reset all client options to default. 恢复客户端的缺省设置 &Reset Options 恢复缺省设置(&R) &Network 网络(&N) (0 = auto, <0 = leave that many cores free) (0 = 自动, <0 = 离开很多免费的核心) W&allet &钱包 Expert 专家 Enable coin &control features 启动货币 &控制功能 If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed. 如果禁用未确认的零钱，则零钱至少需要1个确认才能使用。同时账户余额显示会受到影响。 &Spend unconfirmed change &选择未经确认的花费 Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled. 自动在路由器中打开比特币端口。只有当您的路由器开启了 UPnP 选项时此功能才有效。 Map port using &UPnP 使用 &UPnP 映射端口 Proxy &IP: 代理服务器 &IP： &Port: 端口(&P)： Port of the proxy (e.g. 9050) 代理端口（例如 9050） &Window 窗口(&W) Show only a tray icon after minimizing the window. 最小化窗口后仅显示托盘图标 &Minimize to the tray instead of the taskbar 最小化到托盘(&M) Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Quit in the menu. 当窗口关闭时程序最小化而不是退出。当使用该选项时，程序只能通过在菜单中选择退出来关闭 M&inimize on close 单击关闭按钮最小化(&I) &Display 显示(&D) User Interface &language: 用户界面语言(&L)： The user interface language can be set here. This setting will take effect after restarting Bitcoin. 在这里设置用户界面的语言。设置将在客户端重启后生效。 &Unit to show amounts in: 比特币金额单位(&U)： Choose the default subdivision unit to show in the interface and when sending coins. 选择比特币单位。 Whether to show coin control features or not. 是否需要交易源地址控制功能。 &OK 确定(&O) &Cancel 取消(&C) default 默认 none 无 Confirm options reset 确认恢复缺省设置 Client restart required to activate changes. 更改生效需要重启客户端。 Client will be shutdown, do you want to proceed? 客户端即将关闭，确定继续吗？ This change would require a client restart. 此更改需要重启客户端。 The supplied proxy address is invalid. 提供的代理服务器地址无效。 OverviewPage Form 表单 The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet. 现在显示的消息可能是过期的. 在连接上比特币网络节点后，您的钱包将自动与网络同步，但是这个过程还没有完成。 Watch-only: 查看-只有: Available: 可使用的余额： Your current spendable balance 您当前可使用的余额 Pending: 等待中的余额： Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance 尚未确认的交易总额，未计入当前余额 Immature: 未成熟的： Mined balance that has not yet matured 尚未成熟的挖矿收入余额 Total: 总额： Your current total balance 您当前的总余额 out of sync 数据同步中 PaymentServer URI handling URI 处理 Invalid payment address %1 无效的付款地址 %1 Payment request rejected 支付请求被拒绝 Payment request has expired. 支付请求已超时 Payment request is not initialized. 支付请求未成形。 Requested payment amount of %1 is too small (considered dust). 请求支付的金额 %1 太小（就像尘埃）。 Payment request error 支付请求出错 Cannot start bitcoin: click-to-pay handler 暂时无法启动比特币：点击支付功能 Payment request fetch URL is invalid: %1 付款请求URI链接非法: %1 Payment request file handling 付款请求文件处理 Unverified payment requests to custom payment scripts are unsupported. 不支持到自定义付款脚本的未验证付款请求。 Refund from %1 退款来自 %1 Error communicating with %1: %2 %1: %2 通讯出错 Bad response from server %1 来自 %1 服务器的错误响应 Payment acknowledged 支付已到账 Network request error 网络请求出错 PeerTableModel User Agent 用户代理 Address/Hostname 地址/主机名 Ping Time Ping 时间 QObject Amount 金额 Enter a Bitcoin address (e.g. %1) 请输入一个比特币地址 (例如 %1) %1 d %1 天 %1 h %1 小时 %1 m %1 分钟 %1 s %1 秒 NETWORK 网络 UNKNOWN 未知 None 无 N/A 不可用 %1 ms %1 毫秒 QRImageWidget &Save Image... 保存图片(&S)... &Copy Image 复制图片(&C) Save QR Code 保存二维码 PNG Image (*.png) PNG图片(*.png) RPCConsole Client name 客户端名称 N/A 不可用 Client version 客户端版本 &Information 信息 Debug window 调试窗口 General 常规 Using OpenSSL version 使用 OpenSSL 版本 Using BerkeleyDB version 使用的 BerkeleyDB 版本 Startup time 启动时间 Network 网络 Name 姓名 Number of connections 连接数 Block chain 数据链 Current number of blocks 当前数据块数量 Received 收到 Sent 发送 &Peers &同类 Direction 方向 Version 版本 User Agent 用户代理 Services 服务 Starting Height 开始高度 Sync Height 同步高度 Ban Score 禁止得分 Connection Time 连接时间 Last Send 最后发送 Last Receive 最后接收 Bytes Sent 发送字节 Bytes Received 接收字节 Ping Time Ping 时间 Last block time 上一数据块时间 &Open 打开(&O) &Console 控制台(&C) &Network Traffic 网络流量(&N) &Clear 清除(&C) Totals 总数 In: 输入： Out: 输出： Build date 创建时间 Debug log file 调试日志文件 Open the Bitcoin debug log file from the current data directory. This can take a few seconds for large log files. 打开当前目录中的调试日志文件。日志文件大的话可能要等上几秒钟。 Clear console 清空控制台 Welcome to the Bitcoin RPC console. 欢迎来到 RPC 控制台。 Use up and down arrows to navigate history, and <b>Ctrl-L</b> to clear screen. 使用上下方向键浏览历史, <b>Ctrl-L</b>清除屏幕。 Type <b>help</b> for an overview of available commands. 使用 <b>help</b> 命令显示帮助信息。 %1 B %1 字节 %1 KB %1 KB %1 MB %1 MB %1 GB %1 GB via %1 通过 %1 never 从未 Inbound 传入 Outbound 传出 Unknown 未知 Fetching... 获取中... ReceiveCoinsDialog &Amount: 总额(&A)： &Label: 标签(&L)： &Message: 消息(&M)： Reuse one of the previously used receiving addresses. Reusing addresses has security and privacy issues. Do not use this unless re-generating a payment request made before. 重复使用以前用过的接收地址。重用地址有安全和隐私方面的隐患。除非是为重复生成同一项支付请求，否则请不要这样做。 R&euse an existing receiving address (not recommended) 重用现有的接收地址（不推荐） An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network. 可在付款请求上备注一条信息，在打开付款请求时可以看到。注意：该消息不是通过比特币网络传送。 An optional label to associate with the new receiving address. 可为新建的收款地址添加一个标签。 Use this form to request payments. All fields are <b>optional</b>. 使用此表单要求付款。所有字段都是<b>可选</b>。 An optional amount to request. Leave this empty or zero to not request a specific amount. 可选的请求金额。留空或填零为不要求具体金额。 Clear all fields of the form. 清除此表单的所有字段。 Clear 清除 Requested payments history 请求付款的历史 &Request payment 请求付款(&R) Show the selected request (does the same as double clicking an entry) 显示选中的请求 (双击也可以显示) Show 显示 Remove the selected entries from the list 从列表中移除选中的条目 Remove 移除 Copy label 复制标签 Copy message 复制消息 Copy amount 复制金额 ReceiveRequestDialog QR Code 二维码 Copy &URI 复制 URI(&U) Copy &Address 复制地址(&A) &Save Image... 保存图片(&S)... Request payment to %1 请求付款到 %1 Payment information 付款信息 URI URI Address 地址 Amount 金额 Label 标签 Message 消息 Resulting URI too long, try to reduce the text for label / message. URI 太长，请试着精简标签或消息文本。 Error encoding URI into QR Code. 将 URI 转为二维码失败。 RecentRequestsTableModel Date 日期 Label 标签 Message 消息 Amount 金额 (no label) (没有标签) (no message) (无消息) (no amount) (无金额) SendCoinsDialog Send Coins 发送比特币 Coin Control Features 交易源地址控制功能 Inputs... 输入... automatically selected 自动选择 Insufficient funds! 存款不足！ Quantity: 总量： Bytes: 字节： Amount: 金额： Priority: 优先级： Fee: 费用： After Fee: 加上交易费用后: Change: 变更 : If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address. 如果激活该选项，但是零钱地址用光或者非法，将会新生成零钱地址，转入零钱。 Custom change address 自定义零钱地址 Send to multiple recipients at once 一次发送给多个接收者 Add &Recipient 添加收款人(&R) Clear all fields of the form. 清除此表单的所有字段。 Dust: 小额： Clear &All 清除所有(&A) Balance: 余额： Confirm the send action 确认并发送货币 S&end 发送(&E) Confirm send coins 确认发送货币 %1 to %2 %1 到 %2 Copy quantity 复制金额 Copy amount 复制金额 Copy fee 复制交易费 Copy after fee 复制含交易费的金额 Copy bytes 复制字节 Copy priority 复制优先级 Copy change 复制零钱 Total Amount %1 (= %2) 总额 %1 (= %2) or 或 The recipient address is not valid, please recheck. 收款人地址不合法，请检查。 The amount to pay must be larger than 0. 支付金额必须大于0。 The amount exceeds your balance. 金额超出您的账上余额。 The total exceeds your balance when the %1 transaction fee is included. 计入 %1 交易费后的金额超出您的账上余额。 Duplicate address found, can only send to each address once per send operation. 发现重复的地址, 每次只能对同一地址发送一次。 Transaction creation failed! 交易创建失败！ The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. 错误：该交易被拒绝！发生这种错误的原因可能是：钱包中的比特币已经被用掉，有可能您复制了wallet.dat钱包文件，然后用复制的钱包文件支付了比特币，但是这个钱包文件中没有记录。 Warning: Invalid Bitcoin address 警告：无效的比特币地址 (no label) (没有标签) Warning: Unknown change address 警告：未知的更改地址 Copy dust 复制小额 Are you sure you want to send? 您确定要发出吗？ added as transaction fee 已添加交易费 SendCoinsEntry A&mount: 金额(&M) Pay &To: 付给(&T)： Enter a label for this address to add it to your address book 为这个地址输入一个标签，以便将它添加到您的地址簿 &Label: 标签(&L)： Choose previously used address 选择以前用过的地址 This is a normal payment. 这是笔正常的支付。 Alt+A Alt+A Paste address from clipboard 从剪贴板粘贴地址 Alt+P Alt+P Remove this entry 移除此项 Message: 消息： This is a verified payment request. 这是个有效的支付请求。 Enter a label for this address to add it to the list of used addresses 请为此地址输入一个标签以将它加入用过的地址列表 A message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network. bitcoin:URI 附带的备注信息，将会和交易一起存储，备查。 注意：该消息不会通过比特币网络传输。 This is an unverified payment request. 这是个非有效的支付请求。 Pay To: 支付给: Memo: 便条： ShutdownWindow Bitcoin Core is shutting down... 比特币核心正在关机... Do not shut down the computer until this window disappears. 在此窗口消失前不要关闭计算机。 SignVerifyMessageDialog Signatures - Sign / Verify a Message 签名 - 为消息签名/验证签名消息 &Sign Message 签名消息(&S) You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. 您可以用你的地址对消息进行签名，以证明您是该地址的所有人。注意不要对模棱两可的消息签名，以免遭受钓鱼式攻击。请确保消息内容准确的表达了您的真实意愿。 Choose previously used address 选择以前用过的地址 Alt+A Alt+A Paste address from clipboard 从剪贴板粘贴地址 Alt+P Alt+P Enter the message you want to sign here 请输入您要发送的签名消息 Signature 签名 Copy the current signature to the system clipboard 复制当前签名至剪切板 Sign the message to prove you own this Bitcoin address 签名消息，证明这个地址属于您。 Sign &Message 消息签名(&M) Reset all sign message fields 清空所有签名消息栏 Clear &All 清除所有(&A) &Verify Message 验证消息(&V) Enter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. 在下面输入签名地址，消息（请确保换行符、空格符、制表符等等一个不漏）和签名以验证消息。请确保签名信息准确，提防中间人攻击。 Verify the message to ensure it was signed with the specified Bitcoin address 验证消息，确保消息是由指定的比特币地址签名过的。 Verify &Message 验证消息签名(&M) Reset all verify message fields 清空所有验证消息栏 Click "Sign Message" to generate signature 单击“签名消息“产生签名。 The entered address is invalid. 输入的地址非法。 Please check the address and try again. 请检查地址后重试。 The entered address does not refer to a key. 输入的地址没有关联的公私钥对。 Wallet unlock was cancelled. 钱包解锁动作取消。 Private key for the entered address is not available. 找不到输入地址关联的私钥。 Message signing failed. 消息签名失败。 Message signed. 消息已签名。 The signature could not be decoded. 签名无法解码。 Please check the signature and try again. 请检查签名后重试。 The signature did not match the message digest. 签名与消息摘要不匹配。 Message verification failed. 消息验证失败。 Message verified. 消息验证成功。 SplashScreen Bitcoin Core 比特币核心 The Bitcoin Core developers Bitcoin Core 的开发者 [testnet] [测试网络] TrafficGraphWidget KB/s KB/s TransactionDesc Open until %1 至 %1 个数据块时开启 conflicted 发现冲突 %1/offline %1 / 离线 %1/unconfirmed %1/未确认 %1 confirmations %1 已确认 Status 状态 Date 日期 Source 源 Generated 生成 From 来自 To 到 own address 自己的地址 label 标签 Credit 收入 not accepted 未被接受 Debit 支出 Transaction fee 交易费 Net amount 净额 Message 消息 Comment 备注 Transaction ID ID Merchant 商店 Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours. 生成的比特币在可以使用前必须有 %1 个成熟的区块。当您生成了此区块后，它将被广播到网络中以加入区块链。如果它未成功进入区块链，其状态将变更为“不接受”并且不可使用。这可能偶尔会发生，如果另一个节点比你早几秒钟成功生成一个区块。 Debug information 调试信息 Transaction 交易 Inputs 输入 Amount 金额 true 正确 false 错误 , has not been successfully broadcast yet ，未被成功广播 unknown 未知 TransactionDescDialog Transaction details 交易细节 This pane shows a detailed description of the transaction 当前面板显示了交易的详细信息 TransactionTableModel Date 日期 Type 类别 Address 地址 Immature (%1 confirmations, will be available after %2) 未成熟 (%1 个确认，将在 %2 个后可用) Open until %1 至 %1 个数据块时开启 Confirmed (%1 confirmations) 已确认 (%1 条确认信息) This block was not received by any other nodes and will probably not be accepted! 此数据块未被任何其他节点接收，可能不被接受！ Generated but not accepted 已生成但未被接受 Offline 掉线 Unconfirmed 未确认的 Confirming (%1 of %2 recommended confirmations) 确认中 (推荐 %2个确认，已经有 %1个确认) Conflicted 冲突的 Received with 接收于 Received from 收款来自 Sent to 发送给 Payment to yourself 付款给自己 Mined 挖矿所得 (n/a) （不可用） Transaction status. Hover over this field to show number of confirmations. 交易状态。 鼠标移到此区域可显示确认项数量。 Date and time that the transaction was received. 接收到交易的时间 Type of transaction. 交易类别。 Destination address of transaction. 交易目的地址。 Amount removed from or added to balance. 从余额添加或移除的金额。 TransactionView All 全部 Today 今天 This week 本周 This month 本月 Last month 上月 This year 今年 Range... 范围... Received with 接收于 Sent to 发送给 To yourself 到自己 Mined 挖矿所得 Other 其他 Enter address or label to search 输入地址或标签进行搜索 Min amount 最小金额 Copy address 复制地址 Copy label 复制标签 Copy amount 复制金额 Copy transaction ID 复制交易编号 Edit label 编辑标签 Show transaction details 显示交易详情 Export Transaction History 导出交易历史 Exporting Failed 导出失败 There was an error trying to save the transaction history to %1. 导出交易历史到 %1 时发生错误。 Exporting Successful 导出成功 The transaction history was successfully saved to %1. 交易历史已成功保存到 %1。 Comma separated file (*.csv) 逗号分隔文件 (*.csv) Confirmed 已确认 Date 日期 Type 类别 Label 标签 Address 地址 ID ID Range: 范围： to 到 UnitDisplayStatusBarControl WalletFrame No wallet has been loaded. 没有载入钱包。 WalletModel Send Coins 发送比特币 WalletView &Export 导出(&E) Export the data in the current tab to a file 导出当前数据到文件 Backup Wallet 备份钱包 Wallet Data (*.dat) 钱包文件(*.dat) Backup Failed 备份失败 There was an error trying to save the wallet data to %1. 尝试保存钱包数据至 %1 时发生错误。 The wallet data was successfully saved to %1. 钱包数据成功保存至 %1 。 Backup Successful 备份成功 bitcoin-core Options: 选项： Specify data directory 指定数据目录 Connect to a node to retrieve peer addresses, and disconnect 连接一个节点并获取对端地址，然后断开连接 Specify your own public address 指定您的公共地址 Accept command line and JSON-RPC commands 接受命令行和 JSON-RPC 命令 Run in the background as a daemon and accept commands 在后台运行并接受命令 Use the test network 使用测试网络 Accept connections from outside (default: 1 if no -proxy or -connect) 接受来自外部的连接 (缺省: 如果不带 -proxy or -connect 参数设置为1) %s, you must set a rpcpassword in the configuration file: %s It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=%s (you do not need to remember this password) The username and password MUST NOT be the same. If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com %s, 您必须在配置文件设置rpcpassword: %s 建议您使用下面的随机密码: rpcuser=bitcoinrpc rpcpassword=%s (您无需记住此密码) 用户名和密码 必! 须! 不一样。 如果配置文件不存在，请自行建立一个只有所有者拥有只读权限的文件。 推荐您开启提示通知以便收到错误通知， 像这样: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com Bind to given address and always listen on it. Use [host]:port notation for IPv6 绑定指定的IP地址开始监听。IPv6地址请使用[host]:port 格式 Enter regression test mode, which uses a special chain in which blocks can be solved instantly. 进入回归测试模式，它采用一种特殊的可立即解决的区块链模拟情况。 Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. 错误：该交易被拒绝！发生这种错误的原因可能是：钱包中的比特币已经被用掉，有可能您复制了wallet.dat钱包文件，然后用复制的钱包文件支付了比特币，但是这个钱包文件中没有记录。 Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds! 错误：因为该交易的数量、复杂度或者动用了刚收到不久的资金，您需要支付不少于%s的交易费用。 Execute command when a wallet transaction changes (%s in cmd is replaced by TxID) 当最佳区块变化时执行命令 (命令行中的 %s 会被替换成区块哈希值) In this mode -genproclimit controls how many blocks are generated immediately. 在-genproclimit这种模式下控制产出多少区块 Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d) 设置脚本验证的程序 (%u 到 %d, 0 = 自动, <0 = 保留自由的核心, 默认值: %d) This is a pre-release test build - use at your own risk - do not use for mining or merchant applications 这是测试用的预发布版本 - 请谨慎使用 - 不要用来挖矿，或者在正式商用环境下使用 Unable to bind to %s on this computer. Bitcoin Core is probably already running. 无法 %s的绑定到电脑上，比特币核心钱包可能已经在运行。 Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction. 警告：-paytxfee 交易费设置得太高了！每笔交易都将支付交易费。 Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues. 警告：网络似乎并不完全同意！有些矿工似乎遇到了问题。 Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade. 警告：我们的同行似乎不完全同意！您可能需要升级，或者其他节点可能需要升级。 Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect. 警告：钱包文件wallet.dat读取失败！最重要的公钥、私钥数据都没有问题，但是交易记录或地址簿数据不正确，或者存在数据丢失。 Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup. 警告：钱包文件wallet.dat损坏! 原始的钱包文件已经备份到%s目录下并重命名为{timestamp}.bak 。如果您的账户余额或者交易记录不正确，请使用您的钱包备份文件恢复。 (default: 1) (默认值: 1) <category> can be: <category> 可能是： Attempt to recover private keys from a corrupt wallet.dat 尝试从损坏的钱包文件wallet.dat中恢复私钥 Block creation options: 数据块创建选项： Connect only to the specified node(s) 仅连接到指定节点 Connection options: 连接选项： Corrupted block database detected 检测发现数据块数据库损坏。请使用 -reindex参数重启客户端。 Debugging/Testing options: 调试/测试选项： Discover own IP address (default: 1 when listening and no -externalip) 发现自己的IP地址(缺省:不带 -externalip 参数监听时设置为1) Do not load the wallet and disable wallet RPC calls 不要加载钱包和禁用钱包的 RPC 调用 Do you want to rebuild the block database now? 你想现在就重建块数据库吗？ Error initializing block database 初始化数据块数据库出错 Error initializing wallet database environment %s! Error initializing wallet database environment %s! Error loading block database 导入数据块数据库出错 Error opening block database 导入数据块数据库出错 Error: Disk space is low! 错误：磁盘剩余空间低! Error: Wallet locked, unable to create transaction! 错误：钱包被锁定，无法创建交易！ Failed to listen on any port. Use -listen=0 if you want this. 监听端口失败。请使用 -listen=0 参数。 If <category> is not supplied, output all debugging information. 如果<category>未提供，将输出所有调试信息。 Importing... 导入中... Incorrect or no genesis block found. Wrong datadir for network? 不正确或没有找到起源区块。网络错误？ Invalid -onion address: '%s' 无效的 -onion 地址：“%s” Not enough file descriptors available. 没有足够的文件描述符可用。 Rebuild block chain index from current blk000??.dat files 重新为当前的blk000??.dat文件建立索引 Set database cache size in megabytes (%d to %d, default: %d) 设置以MB为单位的数据库缓存大小(%d 到 %d, 默认值: %d) Set maximum block size in bytes (default: %d) 设置最大区块大小 (默认: %d，单位字节) Specify wallet file (within data directory) 指定钱包文件（数据目录内） This is intended for regression testing tools and app development. 这是用于回归测试和应用开发目的。 Verifying blocks... 正在验证数据库的完整性... Verifying wallet... 正在检测钱包的完整性... Wallet %s resides outside data directory %s 钱包 %s 在外部的数据目录 %s Wallet options: 钱包选项: You need to rebuild the database using -reindex to change -txindex 您需要将 -reindex 改为 -txindex 以重建数据库 Imports blocks from external blk000??.dat file 从blk000??.dat文件导入数据块 Cannot obtain a lock on data directory %s. Bitcoin Core is probably already running. 无法获取数据目录的 %s. 比特币核心钱包可能已经在运行. Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message) 当收到相关提醒或者我们看到一个长分叉时执行命令（%s 将替换为消息） Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect) 通过DNS查询每个地址，如果短地址 (默认值: 1 除非 -连接) Set maximum size of high-priority/low-fee transactions in bytes (default: %d) 设置 高优先级/低交易费 交易的最大字节 (缺省: %d) Cannot resolve -whitebind address: '%s' 无法解析 -whitebind 地址: '%s' Connect through SOCKS5 proxy 通过 SOCKS5 代理连接 Copyright (C) 2009-%i The Bitcoin Core Developers 版权所有 (C) 2009-%i Bitcoin Core 开发者 Could not parse -rpcbind value %s as network address 无法解析 -rpcbind 的值 %s 为网络地址 Error loading wallet.dat: Wallet requires newer version of Bitcoin Core 加载wallet.dat错误：需要新版的比特币核心钱包 Error: Unsupported argument -tor found, use -onion. 错误：发现了不支持的参数 -tor，请使用 -onion。 Information 信息 Initialization sanity check failed. Bitcoin Core is shutting down. 初始化完整性检查失败。Bitcoin Core 即将关闭。 Invalid amount for -minrelaytxfee=<amount>: '%s' -minrelaytxfee=<amount>: '%s' 无效的金额 Invalid amount for -mintxfee=<amount>: '%s' -mintxfee=<amount>: '%s' 无效的金额 Invalid amount for -paytxfee=<amount>: '%s' (must be at least %s) 无效的金额 -paytxfee=<amount>: '%s' (必须至少为 %s) Invalid netmask specified in -whitelist: '%s' -whitelist: '%s' 指定的网络掩码无效 Need to specify a port with -whitebind: '%s' -whitebind: '%s' 需要指定一个端口 Node relay options: 节点中继选项: Print block on startup, if found in block index 如果在搜索区块中找到，请启动打印区块 RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions) RPC SSL选项：(见有关比特币设置用于SSL说明的维基百科) RPC server options: RPC 服务器选项： Randomly drop 1 of every <n> network messages 随机每1个丢失测试<n>网络信息 Randomly fuzz 1 of every <n> network messages 随机每1个模拟测试<n>网络信息 Send trace/debug info to console instead of debug.log file 跟踪/调试信息输出到控制台，不输出到 debug.log 文件 Show all debugging options (usage: --help -help-debug) 显示所有调试选项 (用法: --帮助 -帮助调试) Shrink debug.log file on client startup (default: 1 when no -debug) 客户端启动时压缩debug.log文件(缺省：no-debug模式时为1) Signing transaction failed 签署交易失败 This is experimental software. 这是实验性的软件。 Transaction amount too small 交易量太小 Transaction amounts must be positive 交易金额必须是积极的 Transaction too large 交易太大 Unable to bind to %s on this computer (bind returned error %s) 无法在此计算机上绑定 %s (绑定返回错误 %s) Use UPnP to map the listening port (default: 1 when listening) 使用UPnp映射监听端口(缺省: 监听状态设为1) Username for JSON-RPC connections JSON-RPC 连接用户名 Wallet needed to be rewritten: restart Bitcoin Core to complete 钱包需要被改写：重新启动核心钱包来完成 Warning 警告 Warning: This version is obsolete, upgrade required! 警告：该软件版本已过时，请升级！ Warning: Unsupported argument -benchmark ignored, use -debug=bench. 警告：不支持的参数 -benchmark 已忽略，请使用 -debug=bench。 Warning: Unsupported argument -debugnet ignored, use -debug=net. 警告：不支持的参数 -debugnet 已忽略，请使用 -debug=net。 Zapping all transactions from wallet... Zapping all transactions from wallet... on startup 启动中 wallet.dat corrupt, salvage failed 钱包文件wallet.dat损坏，抢救备份失败 Password for JSON-RPC connections JSON-RPC 连接密码 Execute command when the best block changes (%s in cmd is replaced by block hash) 当最佳数据块变化时执行命令 (命令行中的 %s 会被替换成数据块哈希值) Upgrade wallet to latest format 将钱包升级到最新的格式 Rescan the block chain for missing wallet transactions 重新扫描区块链以查找遗漏的钱包交易 Use OpenSSL (https) for JSON-RPC connections 为 JSON-RPC 连接使用 OpenSSL (https) 连接 This help message 本帮助信息 Allow DNS lookups for -addnode, -seednode and -connect 使用 -addnode, -seednode 和 -connect 选项时允许查询DNS Loading addresses... 正在加载地址簿... Error loading wallet.dat: Wallet corrupted wallet.dat 钱包文件加载出错：钱包损坏 Error loading wallet.dat wallet.dat 钱包文件加载出错 Invalid -proxy address: '%s' 无效的代理地址：%s Unknown network specified in -onlynet: '%s' -onlynet 指定的是未知网络：%s Cannot resolve -bind address: '%s' 无法解析 -bind 端口地址: '%s' Cannot resolve -externalip address: '%s' 无法解析 -externalip 地址: '%s' Invalid amount for -paytxfee=<amount>: '%s' 非法金额 -paytxfee=<amount>: '%s' Invalid amount 无效金额 Insufficient funds 金额不足 Loading block index... 正在加载数据块索引... Add a node to connect to and attempt to keep the connection open 添加节点并与其保持连接 Loading wallet... 正在加载钱包... Cannot downgrade wallet 无法降级钱包 Cannot write default address 无法写入默认地址 Rescanning... 正在重新扫描... Done loading 加载完成 To use the %s option 使用 %s 选项 Error 错误