AddressBookPage Right-click to edit address or label Right-click to edit address or label Create a new address Create a new address &New &New Copy the currently selected address to the system clipboard Copy the currently selected address to the system clipboard &Copy &Copy C&lose C&lose Delete the currently selected address from the list Delete the currently selected address from the list Export the data in the current tab to a file Export the data in the current tab to a file &Export &Export &Delete &Delete Choose the address to send coins to Choose the address to send coins to Choose the address to receive coins with Choose the address to receive coins with C&hoose C&hoose Sending addresses Sending addresses Receiving addresses Receiving addresses These are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins. These are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins. These are your Bitcoin addresses for receiving payments. It is recommended to use a new receiving address for each transaction. These are your Bitcoin addresses for receiving payments. It is recommended to use a new receiving address for each transaction. &Copy Address &Copy Address Copy &Label Copy &Label &Edit &Edit Export Address List Export Address List Comma separated file (*.csv) Comma separated file (*.csv) Exporting Failed Exporting Failed There was an error trying to save the address list to %1. Please try again. There was an error trying to save the address list to %1. Please try again. AddressTableModel Label Label Address Address (no label) (no label) AskPassphraseDialog Passphrase Dialog Passphrase Dialog Enter passphrase Enter passphrase New passphrase New passphrase Repeat new passphrase Repeat new passphrase Show password Show password Enter the new passphrase to the wallet.<br/>Please use a passphrase of <b>ten or more random characters</b>, or <b>eight or more words</b>. Enter the new passphrase to the wallet.<br/>Please use a passphrase of <b>ten or more random characters</b>, or <b>eight or more words</b>. Encrypt wallet Encrypt wallet This operation needs your wallet passphrase to unlock the wallet. This operation needs your wallet passphrase to unlock the wallet. Unlock wallet Unlock wallet This operation needs your wallet passphrase to decrypt the wallet. This operation needs your wallet passphrase to decrypt the wallet. Decrypt wallet Decrypt wallet Change passphrase Change passphrase Enter the old passphrase and new passphrase to the wallet. Enter the old passphrase and new passphrase to the wallet. Confirm wallet encryption Confirm wallet encryption Warning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR BITCOINS</b>! Warning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR BITCOINS</b>! Are you sure you wish to encrypt your wallet? Are you sure you wish to encrypt your wallet? Wallet encrypted Wallet encrypted %1 will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer. %1 will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer. IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet. IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet. Wallet encryption failed Wallet encryption failed Wallet encryption failed due to an internal error. Your wallet was not encrypted. Wallet encryption failed due to an internal error. Your wallet was not encrypted. The supplied passphrases do not match. The supplied passphrases do not match. Wallet unlock failed Wallet unlock failed The passphrase entered for the wallet decryption was incorrect. The passphrase entered for the wallet decryption was incorrect. Wallet decryption failed Wallet decryption failed Wallet passphrase was successfully changed. Wallet passphrase was successfully changed. Warning: The Caps Lock key is on! Warning: The Caps Lock key is on! BanTableModel IP/Netmask IP/Netmask Banned Until Banned Until BitcoinGUI Sign &message... Sign &message... Synchronizing with network... Synchronising with network... &Overview &Overview Node Node Show general overview of wallet Show general overview of wallet &Transactions &Transactions Browse transaction history Browse transaction history E&xit E&xit Quit application Quit application &About %1 &About %1 Show information about %1 Show information about %1 About &Qt About &Qt Show information about Qt Show information about Qt &Options... &Options... Modify configuration options for %1 Modify configuration options for %1 &Encrypt Wallet... &Encrypt Wallet... &Backup Wallet... &Backup Wallet... &Change Passphrase... &Change Passphrase... &Sending addresses... &Sending addresses... &Receiving addresses... &Receiving addresses... Open &URI... Open &URI... Click to disable network activity. Click to disable network activity. Network activity disabled. Network activity disabled. Click to enable network activity again. Click to enable network activity again. Syncing Headers (%1%)... Syncing Headers (%1%)... Reindexing blocks on disk... Reindexing blocks on disk... Send coins to a Bitcoin address Send coins to a Bitcoin address Backup wallet to another location Backup wallet to another location Change the passphrase used for wallet encryption Change the passphrase used for wallet encryption &Debug window &Debug window Open debugging and diagnostic console Open debugging and diagnostic console &Verify message... &Verify message... Bitcoin Bitcoin Wallet Wallet &Send &Send &Receive &Receive &Show / Hide &Show / Hide Show or hide the main Window Show or hide the main Window Encrypt the private keys that belong to your wallet Encrypt the private keys that belong to your wallet Sign messages with your Bitcoin addresses to prove you own them Sign messages with your Bitcoin addresses to prove you own them Verify messages to ensure they were signed with specified Bitcoin addresses Verify messages to ensure they were signed with specified Bitcoin addresses &File &File &Settings &Settings &Help &Help Tabs toolbar Tabs toolbar Request payments (generates QR codes and bitcoin: URIs) Request payments (generates QR codes and bitcoin: URIs) Show the list of used sending addresses and labels Show the list of used sending addresses and labels Show the list of used receiving addresses and labels Show the list of used receiving addresses and labels Open a bitcoin: URI or payment request Open a bitcoin: URI or payment request &Command-line options &Command-line options %n active connection(s) to Bitcoin network %n active connection to Bitcoin network%n active connections to Bitcoin network Indexing blocks on disk... Indexing blocks on disk... Processing blocks on disk... Processing blocks on disk... Processed %n block(s) of transaction history. Processed %n block of transaction history.Processed %n blocks of transaction history. %1 behind %1 behind Last received block was generated %1 ago. Last received block was generated %1 ago. Transactions after this will not yet be visible. Transactions after this will not yet be visible. Error Error Warning Warning Information Information Up to date Up to date Show the %1 help message to get a list with possible Bitcoin command-line options Show the %1 help message to get a list with possible Bitcoin command-line options %1 client %1 client Connecting to peers... Connecting to peers... Catching up... Catching up... Date: %1 Date: %1 Amount: %1 Amount: %1 Type: %1 Type: %1 Label: %1 Label: %1 Address: %1 Address: %1 Sent transaction Sent transaction Incoming transaction Incoming transaction HD key generation is <b>enabled</b> HD key generation is <b>enabled</b> HD key generation is <b>disabled</b> HD key generation is <b>disabled</b> Wallet is <b>encrypted</b> and currently <b>unlocked</b> Wallet is <b>encrypted</b> and currently <b>unlocked</b> Wallet is <b>encrypted</b> and currently <b>locked</b> Wallet is <b>encrypted</b> and currently <b>locked</b> A fatal error occurred. Bitcoin can no longer continue safely and will quit. A fatal error occurred. Bitcoin can no longer continue safely and will quit. CoinControlDialog Coin Selection Coin Selection Quantity: Quantity: Bytes: Bytes: Amount: Amount: Fee: Fee: Dust: Dust: After Fee: After Fee: Change: Change: (un)select all (un)select all Tree mode Tree mode List mode List mode Amount Amount Received with label Received with label Received with address Received with address Date Date Confirmations Confirmations Confirmed Confirmed Copy address Copy address Copy label Copy label Copy amount Copy amount Copy transaction ID Copy transaction ID Lock unspent Lock unspent Unlock unspent Unlock unspent Copy quantity Copy quantity Copy fee Copy fee Copy after fee Copy after fee Copy bytes Copy bytes Copy dust Copy dust Copy change Copy change (%1 locked) (%1 locked) yes yes no no This label turns red if any recipient receives an amount smaller than the current dust threshold. This label turns red if any recipient receives an amount smaller than the current dust threshold. Can vary +/- %1 satoshi(s) per input. Can vary +/- %1 satoshi(s) per input. (no label) (no label) change from %1 (%2) change from %1 (%2) (change) (change) EditAddressDialog Edit Address Edit Address &Label &Label The label associated with this address list entry The label associated with this address list entry The address associated with this address list entry. This can only be modified for sending addresses. The address associated with this address list entry. This can only be modified for sending addresses. &Address &Address New receiving address New receiving address New sending address New sending address Edit receiving address Edit receiving address Edit sending address Edit sending address The entered address "%1" is not a valid Bitcoin address. The entered address "%1" is not a valid Bitcoin address. The entered address "%1" is already in the address book. The entered address "%1" is already in the address book. Could not unlock wallet. Could not unlock wallet. New key generation failed. New key generation failed. FreespaceChecker A new data directory will be created. A new data directory will be created. name name Directory already exists. Add %1 if you intend to create a new directory here. Directory already exists. Add %1 if you intend to create a new directory here. Path already exists, and is not a directory. Path already exists, and is not a directory. Cannot create data directory here. Cannot create data directory here. HelpMessageDialog version version (%1-bit) (%1-bit) About %1 About %1 Command-line options Command-line options Usage: Usage: command-line options command-line options UI Options: UI Options: Choose data directory on startup (default: %u) Choose data directory on startup (default: %u) Set language, for example "de_DE" (default: system locale) Set language, for example "de_DE" (default: system locale) Start minimized Start minimised Set SSL root certificates for payment request (default: -system-) Set SSL root certificates for payment request (default: -system-) Show splash screen on startup (default: %u) Show splash screen on startup (default: %u) Reset all settings changed in the GUI Reset all settings changed in the GUI Intro Welcome Welcome Welcome to %1. Welcome to %1. As this is the first time the program is launched, you can choose where %1 will store its data. As this is the first time the program is launched, you can choose where %1 will store its data. When you click OK, %1 will begin to download and process the full %4 block chain (%2GB) starting with the earliest transactions in %3 when %4 initially launched. When you click OK, %1 will begin to download and process the full %4 block chain (%2GB) starting with the earliest transactions in %3 when %4 initially launched. This initial synchronisation is very demanding, and may expose hardware problems with your computer that had previously gone unnoticed. Each time you run %1, it will continue downloading where it left off. This initial synchronisation is very demanding, and may expose hardware problems with your computer that had previously gone unnoticed. Each time you run %1, it will continue downloading where it left off. If you have chosen to limit block chain storage (pruning), the historical data must still be downloaded and processed, but will be deleted afterward to keep your disk usage low. If you have chosen to limit block chain storage (pruning), the historical data must still be downloaded and processed, but will be deleted afterward to keep your disk usage low. Use the default data directory Use the default data directory Use a custom data directory: Use a custom data directory: Bitcoin Bitcoin At least %1 GB of data will be stored in this directory, and it will grow over time. At least %1 GB of data will be stored in this directory, and it will grow over time. Approximately %1 GB of data will be stored in this directory. Approximately %1 GB of data will be stored in this directory. %1 will download and store a copy of the Bitcoin block chain. %1 will download and store a copy of the Bitcoin block chain. The wallet will also be stored in this directory. The wallet will also be stored in this directory. Error: Specified data directory "%1" cannot be created. Error: Specified data directory "%1" cannot be created. Error Error %n GB of free space available %n GB of free space available%n GB of free space available (of %n GB needed) (of %n GB needed)(of %n GB needed) ModalOverlay Form Form Recent transactions may not yet be visible, and therefore your wallet's balance might be incorrect. This information will be correct once your wallet has finished synchronizing with the bitcoin network, as detailed below. Recent transactions may not yet be visible, and therefore your wallet's balance might be incorrect. This information will be correct once your wallet has finished synchronising with the Bitcoin network, as detailed below. Attempting to spend bitcoins that are affected by not-yet-displayed transactions will not be accepted by the network. Attempting to spend Bitcoins that are affected by not-yet-displayed transactions will not be accepted by the network. Number of blocks left Number of blocks left Unknown... Unknown... Last block time Last block time Progress Progress Progress increase per hour Progress increase per hour calculating... calculating... Estimated time left until synced Estimated time left until synced Hide Hide Unknown. Syncing Headers (%1)... Unknown. Syncing Headers (%1)... OpenURIDialog Open URI Open URI Open payment request from URI or file Open payment request from URI or file URI: URI: Select payment request file Select payment request file Select payment request file to open Select payment request file to open OptionsDialog Options Options &Main &Main Automatically start %1 after logging in to the system. Automatically start %1 after logging in to the system. &Start %1 on system login &Start %1 on system login Size of &database cache Size of &database cache MB MB Number of script &verification threads Number of script &verification threads IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1) IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1) Shows if the supplied default SOCKS5 proxy is used to reach peers via this network type. Shows if the supplied default SOCKS5 proxy is used to reach peers via this network type. Use separate SOCKS&5 proxy to reach peers via Tor hidden services: Use separate SOCKS&5 proxy to reach peers via Tor hidden services: Hide the icon from the system tray. Hide the icon from the system tray. &Hide tray icon &Hide tray icon Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Exit in the menu. Minimise instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Exit in the menu. Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |. Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |. Active command-line options that override above options: Active command-line options that override above options: Open the %1 configuration file from the working directory. Open the %1 configuration file from the working directory. Open Configuration File Open Configuration File Reset all client options to default. Reset all client options to default. &Reset Options &Reset Options &Network &Network (0 = auto, <0 = leave that many cores free) (0 = auto, <0 = leave that many cores free) W&allet W&allet Expert Expert Enable coin &control features Enable coin &control features If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed. If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed. &Spend unconfirmed change &Spend unconfirmed change Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled. Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled. Map port using &UPnP Map port using &UPnP Accept connections from outside. Accept connections from outside. Allow incomin&g connections Allow incomin&g connections Connect to the Bitcoin network through a SOCKS5 proxy. Connect to the Bitcoin network through a SOCKS5 proxy. &Connect through SOCKS5 proxy (default proxy): &Connect through SOCKS5 proxy (default proxy): Proxy &IP: Proxy &IP: &Port: &Port: Port of the proxy (e.g. 9050) Port of the proxy (e.g. 9050) Used for reaching peers via: Used for reaching peers via: IPv4 IPv4 IPv6 IPv6 Tor Tor Connect to the Bitcoin network through a separate SOCKS5 proxy for Tor hidden services. Connect to the Bitcoin network through a separate SOCKS5 proxy for Tor hidden services. &Window &Window Show only a tray icon after minimizing the window. Show on a tray icon after minimising the window. &Minimize to the tray instead of the taskbar &Minimise to the tray instead of the task bar M&inimize on close M&inimise on close &Display &Display User Interface &language: User Interface &language: The user interface language can be set here. This setting will take effect after restarting %1. The user interface language can be set here. This setting will take effect after restarting %1. &Unit to show amounts in: &Unit to show amounts in: Choose the default subdivision unit to show in the interface and when sending coins. Choose the default subdivision unit to show in the interface and when sending coins. Whether to show coin control features or not. Whether to show coin control features or not. &Third party transaction URLs &Third party transaction URLs &OK &OK &Cancel &Cancel default default none none Confirm options reset Confirm options reset Client restart required to activate changes. Client restart required to activate changes. Client will be shut down. Do you want to proceed? Client will be shut down. Do you want to proceed? Configuration options Configuration options The configuration file is used to specify advanced user options which override GUI settings. Additionally, any command-line options will override this configuration file. The configuration file is used to specify advanced user options which override GUI settings. Additionally, any command-line options will override this configuration file. Error Error The configuration file could not be opened. The configuration file could not be opened. This change would require a client restart. This change would require a client restart. The supplied proxy address is invalid. The supplied proxy address is invalid. OverviewPage Form Form The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet. The displayed information may be out of date. Your Wallet automatically synchronises with the Bitcoin Network after a connection is established, but this process has not been completed yet. Watch-only: Watch-only: Available: Available: Your current spendable balance Your current spendable balance Pending: Pending: Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance Immature: Immature: Mined balance that has not yet matured Mined balance that has not yet matured Balances Balances Total: Total: Your current total balance Your current total balance Your current balance in watch-only addresses Your current balance in watch-only addresses Spendable: Spendable: Recent transactions Recent transactions Unconfirmed transactions to watch-only addresses Unconfirmed transactions to watch-only addresses Mined balance in watch-only addresses that has not yet matured Mined balance in watch-only addresses that has not yet matured Current total balance in watch-only addresses Current total balance in watch-only addresses PaymentServer Payment request error Payment request error Cannot start bitcoin: click-to-pay handler Cannot start Bitcoin: click-to-pay handler URI handling URI handling Payment request fetch URL is invalid: %1 Payment request fetch URL is invalid: %1 Invalid payment address %1 Invalid payment address %1 URI cannot be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters. URI cannot be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters. Payment request file handling Payment request file handling Payment request file cannot be read! This can be caused by an invalid payment request file. Payment request file cannot be read! This can be caused by an invalid payment request file. Payment request rejected Payment request rejected. Payment request network doesn't match client network. Payment request network doesn't match client network. Payment request expired. Payment request expired. Payment request is not initialized. Payment request is not initialised. Unverified payment requests to custom payment scripts are unsupported. Unverified payment requests to custom payment scripts are unsupported. Invalid payment request. Invalid payment request. Requested payment amount of %1 is too small (considered dust). Requested payment amount of %1 is too small (considered dust). Refund from %1 Refund from %1 Payment request %1 is too large (%2 bytes, allowed %3 bytes). Payment request %1 is too large (%2 bytes, allowed %3 bytes). Error communicating with %1: %2 Error communicating with %1: %2 Payment request cannot be parsed! Payment request cannot be parsed! Bad response from server %1 Bad response from server %1 Network request error Network request error Payment acknowledged Payment acknowledged PeerTableModel User Agent User Agent Node/Service Node/Service NodeId NodeId Ping Ping Sent Sent Received Received QObject Amount Amount Enter a Bitcoin address (e.g. %1) Enter a Bitcoin address (e.g. %1) %1 d %1 d %1 h %1 h %1 m %1 m %1 s %1 s None None N/A N/A %1 ms %1 ms %n second(s) %n second%n seconds %n minute(s) %n minute%n minutes %n hour(s) %n hour%n hours %n day(s) %n day%n days %n week(s) %n week%n weeks %1 and %2 %1 and %2 %n year(s) %n year%n years %1 B %1 B %1 KB %1 KB %1 MB %1 MB %1 GB %1 GB %1 didn't yet exit safely... %1 didn't yet exit safely... unknown unknown QObject::QObject Error: Specified data directory "%1" does not exist. Error: Specified data directory "%1" does not exist. Error: Cannot parse configuration file: %1. Only use key=value syntax. Error: Cannot parse configuration file: %1. Only use key=value syntax. Error: %1 Error: %1 QRImageWidget &Save Image... &Save Image... &Copy Image &Copy Image Save QR Code Save QR Code PNG Image (*.png) PNG Image (*.png) RPCConsole N/A N/A Client version Client version &Information &Information Debug window Debug window General General Using BerkeleyDB version Using BerkeleyDB version Datadir Datadir Startup time Startup time Network Network Name Name Number of connections Number of connections Block chain Block chain Current number of blocks Current number of blocks Memory Pool Memory Pool Current number of transactions Current number of transactions Memory usage Memory usage &Reset &Reset Received Received Sent Sent &Peers &Peers Banned peers Banned peers Select a peer to view detailed information. Select a peer to view detailed information. Whitelisted Whitelisted Direction Direction Version Version Starting Block Starting Block Synced Headers Synced Headers Synced Blocks Synced Blocks User Agent User Agent Open the %1 debug log file from the current data directory. This can take a few seconds for large log files. Open the %1 debug log file from the current data directory. This can take a few seconds for large log files. Decrease font size Decrease font size Increase font size Increase font size Services Services Ban Score Ban Score Connection Time Connection Time Last Send Last Send Last Receive Last Receive Ping Time Ping Time The duration of a currently outstanding ping. The duration of a currently outstanding ping. Ping Wait Ping Wait Min Ping Min Ping Time Offset Time Offset Last block time Last block time &Open &Open &Console &Console &Network Traffic &Network Traffic Totals Totals In: In: Out: Out: Debug log file Debug log file Clear console Clear console 1 &hour 1 &hour 1 &day 1 &day 1 &week 1 &week 1 &year 1 &year &Disconnect &Disconnect Ban for Ban for &Unban &Unban Welcome to the %1 RPC console. Welcome to the %1 RPC console. Use up and down arrows to navigate history, and %1 to clear screen. Use up and down arrows to navigate history, and %1 to clear screen. Type %1 for an overview of available commands. Type %1 for an overview of available commands. For more information on using this console type %1. For more information on using this console type %1. WARNING: Scammers have been active, telling users to type commands here, stealing their wallet contents. Do not use this console without fully understanding the ramifications of a command. WARNING: Scammers have been active, telling users to type commands here and stealing their wallet contents. Do not use this console without fully understanding the ramifications of a command. Network activity disabled Network activity disabled (node id: %1) (node id: %1) via %1 via %1 never never Inbound Inbound Outbound Outbound Yes Yes No No Unknown Unknown ReceiveCoinsDialog &Amount: &Amount: &Label: &Label: &Message: &Message: An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network. An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network. An optional label to associate with the new receiving address. An optional label to associate with the new receiving address. Use this form to request payments. All fields are <b>optional</b>. Use this form to request payments. All fields are <b>optional</b>. An optional amount to request. Leave this empty or zero to not request a specific amount. An optional amount to request. Leave this empty or zero to not request a specific amount. Clear all fields of the form. Clear all fields of the form. Clear Clear Requested payments history Requested payments history &Request payment &Request payment Bech32 addresses (BIP-173) are cheaper to spend from and offer better protection against typos. When unchecked a P2SH wrapped SegWit address will be created, compatible with older wallets. Bech32 addresses (BIP-173) are cheaper to spend from and offer better protection against typos. When unchecked a P2SH wrapped SegWit address will be created, compatible with older wallets. Generate Bech32 address Generate Bech32 address Show the selected request (does the same as double clicking an entry) Show the selected request (does the same as double clicking an entry) Show Show Remove the selected entries from the list Remove the selected entries from the list Remove Remove Copy URI Copy URI Copy label Copy label Copy message Copy message Copy amount Copy amount ReceiveRequestDialog QR Code QR Code Copy &URI Copy &URI Copy &Address Copy &Address &Save Image... &Save Image... Request payment to %1 Request payment to %1 Payment information Payment information URI URI Address Address Amount Amount Label Label Message Message Resulting URI too long, try to reduce the text for label / message. Resulting URI too long, try to reduce the text for label / message. Error encoding URI into QR Code. Error encoding URI into QR Code. RecentRequestsTableModel Date Date Label Label Message Message (no label) (no label) (no message) (no message) (no amount requested) (no amount requested) Requested Requested SendCoinsDialog Send Coins Send Coins Coin Control Features Coin Control Features Inputs... Inputs... automatically selected automatically selected Insufficient funds! Insufficient funds! Quantity: Quantity: Bytes: Bytes: Amount: Amount: Fee: Fee: After Fee: After Fee: Change: Change: If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address. If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address. Custom change address Custom change address Transaction Fee: Transaction Fee: Choose... Choose... Using the fallbackfee can result in sending a transaction that will take several hours or days (or never) to confirm. Consider choosing your fee manually or wait until you have validated the complete chain. Using the fallback fee can result in sending a transaction that will take several hours or days (or never) to confirm. Consider choosing your fee manually or wait until you have validated the complete chain. Warning: Fee estimation is currently not possible. Warning: Fee estimation is currently not possible. collapse fee-settings collapse fee-settings per kilobyte per kilobyte If the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "total at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte. If the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "total at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte. Hide Hide Paying only the minimum fee is just fine as long as there is less transaction volume than space in the blocks. But be aware that this can end up in a never confirming transaction once there is more demand for bitcoin transactions than the network can process. Paying only the minimum fee is just fine as long as there is less transaction volume than space in the blocks. But be aware that this can end up in a never confirming transaction once there is more demand for bitcoin transactions than the network can process. (read the tooltip) (read the tooltip) Recommended: Recommended: Custom: Custom: (Smart fee not initialized yet. This usually takes a few blocks...) (Smart fee not initialised yet. This usually takes a few blocks...) Send to multiple recipients at once Send to multiple recipients at once Add &Recipient Add &Recipient Clear all fields of the form. Clear all fields of the form. Dust: Dust: Confirmation time target: Confirmation time target: Enable Replace-By-Fee Enable Replace-By-Fee With Replace-By-Fee (BIP-125) you can increase a transaction's fee after it is sent. Without this, a higher fee may be recommended to compensate for increased transaction delay risk. With Replace-By-Fee (BIP-125) you can increase a transaction's fee after it is sent. Without this, a higher fee may be recommended to compensate for increased transaction delay risk. Clear &All Clear &All Balance: Balance: Confirm the send action Confirm the send action S&end S&end Copy quantity Copy quantity Copy amount Copy amount Copy fee Copy fee Copy after fee Copy after fee Copy bytes Copy bytes Copy dust Copy dust Copy change Copy change %1 (%2 blocks) %1 (%2 blocks) %1 to %2 %1 to %2 Are you sure you want to send? Are you sure you want to send? added as transaction fee added as transaction fee Total Amount %1 Total Amount %1 or or You can increase the fee later (signals Replace-By-Fee, BIP-125). You can increase the fee later (signals Replace-By-Fee, BIP-125). Not signalling Replace-By-Fee, BIP-125. Not signalling Replace-By-Fee, BIP-125. Confirm send coins Confirm send coins The recipient address is not valid. Please recheck. The recipient address is not valid. Please recheck. The amount to pay must be larger than 0. The amount to pay must be larger than 0. The amount exceeds your balance. The amount exceeds your balance. The total exceeds your balance when the %1 transaction fee is included. The total exceeds your balance when the %1 transaction fee is included. Duplicate address found: addresses should only be used once each. Duplicate address found: addresses should only be used once each. Transaction creation failed! Transaction creation failed! The transaction was rejected with the following reason: %1 The transaction was rejected with the following reason: %1 A fee higher than %1 is considered an absurdly high fee. A fee higher than %1 is considered an absurdly high fee. Payment request expired. Payment request expired. Pay only the required fee of %1 Pay only the required fee of %1 Estimated to begin confirmation within %n block(s). Estimated to begin confirmation within %n block.Estimated to begin confirmation within %n blocks. Warning: Invalid Bitcoin address Warning: Invalid Bitcoin address Warning: Unknown change address Warning: Unknown change address Confirm custom change address Confirm custom change address The address you selected for change is not part of this wallet. Any or all funds in your wallet may be sent to this address. Are you sure? The address you selected for change is not part of this wallet. Any or all funds in your wallet may be sent to this address. Are you sure? (no label) (no label) SendCoinsEntry A&mount: A&mount: Pay &To: Pay &To: &Label: &Label: Choose previously used address Choose previously used address This is a normal payment. This is a normal payment. The Bitcoin address to send the payment to The Bitcoin address to send the payment to Alt+A Alt+A Paste address from clipboard Paste address from clipboard Alt+P Alt+P Remove this entry Remove this entry The fee will be deducted from the amount being sent. The recipient will receive less bitcoins than you enter in the amount field. If multiple recipients are selected, the fee is split equally. The fee will be deducted from the amount being sent. The recipient will receive less bitcoins than you enter in the amount field. If multiple recipients are selected, the fee is split equally. S&ubtract fee from amount S&ubtract fee from amount Use available balance Use available balance Message: Message: This is an unauthenticated payment request. This is an unauthenticated payment request. This is an authenticated payment request. This is an authenticated payment request. Enter a label for this address to add it to the list of used addresses Enter a label for this address to add it to the list of used addresses A message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network. A message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network. Pay To: Pay To: Memo: Memo: Enter a label for this address to add it to your address book Enter a label for this address to add it to your address book SendConfirmationDialog Yes Yes ShutdownWindow %1 is shutting down... %1 is shutting down... Do not shut down the computer until this window disappears. Do not shut down the computer until this window disappears. SignVerifyMessageDialog Signatures - Sign / Verify a Message Signatures - Sign / Verify a Message &Sign Message &Sign Message You can sign messages/agreements with your addresses to prove you can receive bitcoins sent to them. Be careful not to sign anything vague or random, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. You can sign messages/agreements with your addresses to prove you can receive bitcoins sent to them. Be careful not to sign anything vague or random, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. The Bitcoin address to sign the message with The Bitcoin address to sign the message with Choose previously used address Choose previously used address Alt+A Alt+A Paste address from clipboard Paste address from clipboard Alt+P Alt+P Enter the message you want to sign here Enter the message you want to sign here Signature Signature Copy the current signature to the system clipboard Copy the current signature to the system clipboard Sign the message to prove you own this Bitcoin address Sign the message to prove you own this Bitcoin address Sign &Message Sign &Message Reset all sign message fields Reset all sign message fields Clear &All Clear &All &Verify Message &Verify Message Enter the receiver's address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Note that this only proves the signing party receives with the address, it cannot prove sendership of any transaction! Enter the receiver's address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Note that this only proves the signing party receives with the address, it cannot prove sendership of any transaction! The Bitcoin address the message was signed with The Bitcoin address the message was signed with Verify the message to ensure it was signed with the specified Bitcoin address Verify the message to ensure it was signed with the specified Bitcoin address Verify &Message Verify &Message Reset all verify message fields Reset all verify message fields Click "Sign Message" to generate signature Click "Sign Message" to generate signature The entered address is invalid. The entered address is invalid. Please check the address and try again. Please check the address and try again. The entered address does not refer to a key. The entered address does not refer to a key. Wallet unlock was cancelled. Wallet unlock was cancelled. Private key for the entered address is not available. Private key for the entered address is not available. Message signing failed. Message signing failed. Message signed. Message signed. The signature could not be decoded. The signature could not be decoded. Please check the signature and try again. Please check the signature and try again. The signature did not match the message digest. The signature did not match the message digest. Message verification failed. Message verification failed. Message verified. Message verified. SplashScreen [testnet] [testnet] TrafficGraphWidget KB/s KB/s TransactionDesc Open for %n more block(s) Open for %n more blockOpen for %n more blocks Open until %1 Open until %1 conflicted with a transaction with %1 confirmations conflicted with a transaction with %1 confirmations %1/offline %1/offline 0/unconfirmed, %1 0/unconfirmed, %1 in memory pool in memory pool not in memory pool not in memory pool abandoned abandoned %1/unconfirmed %1/unconfirmed %1 confirmations %1 confirmations Status Status , has not been successfully broadcast yet , has not been successfully broadcast yet , broadcast through %n node(s) , broadcast through %n node, broadcast through %n nodes Date Date Source Source Generated Generated From From unknown unknown To To own address own address watch-only watch-only label label Credit Credit matures in %n more block(s) matures in %n more blockmatures in %n more blocks not accepted not accepted Debit Debit Total debit Total debit Total credit Total credit Transaction fee Transaction fee Net amount Net amount Message Message Comment Comment Transaction ID Transaction ID Transaction total size Transaction total size Output index Output index Merchant Merchant Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours. Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours. Debug information Debug information Transaction Transaction Inputs Inputs Amount Amount true true false false TransactionDescDialog This pane shows a detailed description of the transaction This pane shows a detailed description of the transaction Details for %1 Details for %1 TransactionTableModel Date Date Type Type Label Label Open for %n more block(s) Open for %n more blockOpen for %n more blocks Open until %1 Open until %1 Offline Offline Unconfirmed Unconfirmed Abandoned Abandoned Confirming (%1 of %2 recommended confirmations) Confirming (%1 of %2 recommended confirmations) Confirmed (%1 confirmations) Confirmed (%1 confirmations) Conflicted Conflicted Immature (%1 confirmations, will be available after %2) Immature (%1 confirmations, will be available after %2) This block was not received by any other nodes and will probably not be accepted! This block was not received by any other nodes and will probably not be accepted! Generated but not accepted Generated but not accepted Received with Received with Received from Received from Sent to Sent to Payment to yourself Payment to yourself Mined Mined watch-only watch-only (n/a) (n/a) (no label) (no label) Transaction status. Hover over this field to show number of confirmations. Transaction status. Hover over this field to show number of confirmations. Date and time that the transaction was received. Date and time that the transaction was received. Type of transaction. Type of transaction. Whether or not a watch-only address is involved in this transaction. Whether or not a watch-only address is involved in this transaction. User-defined intent/purpose of the transaction. User-defined intent/purpose of the transaction. Amount removed from or added to balance. Amount removed from or added to balance. TransactionView All All Today Today This week This week This month This month Last month Last month This year This year Range... Range... Received with Received with Sent to Sent to To yourself To yourself Mined Mined Other Other Enter address, transaction id, or label to search Enter address, transaction id or label to search. Min amount Min amount Abandon transaction Abandon transaction Increase transaction fee Increase transaction fee Copy address Copy address Copy label Copy label Copy amount Copy amount Copy transaction ID Copy transaction ID Copy raw transaction Copy raw transaction Copy full transaction details Copy full transaction details Edit label Edit label Show transaction details Show transaction details Export Transaction History Export Transaction History Comma separated file (*.csv) Comma separated file (*.csv) Confirmed Confirmed Watch-only Watch-only Date Date Type Type Label Label Address Address ID ID Exporting Failed Exporting Failed There was an error trying to save the transaction history to %1. There was an error trying to save the transaction history to %1. Exporting Successful Exporting Successful The transaction history was successfully saved to %1. The transaction history was successfully saved to %1. Range: Range: to to UnitDisplayStatusBarControl Unit to show amounts in. Click to select another unit. Unit to show amounts in. Click to select another unit. WalletFrame No wallet has been loaded. No wallet has been loaded. WalletModel Send Coins Send Coins Fee bump error Fee bump error Increasing transaction fee failed Increasing transaction fee failed. Do you want to increase the fee? Do you want to increase the fee? Current fee: Current fee: Increase: Increase: New fee: New fee: Confirm fee bump Confirm fee bump Can't sign transaction. Can't sign transaction. Could not commit transaction Could not commit transaction. WalletView &Export &Export Export the data in the current tab to a file Export the data in the current tab to a file Backup Wallet Backup Wallet Wallet Data (*.dat) Wallet Data (*.dat) Backup Failed Backup Failed There was an error trying to save the wallet data to %1. There was an error trying to save the wallet data to %1. Backup Successful Backup Successful The wallet data was successfully saved to %1. The wallet data was successfully saved to %1. bitcoin-core Options: Options: Specify data directory Specify data directory Connect to a node to retrieve peer addresses, and disconnect Connect to a node to retrieve peer addresses, and disconnect Specify your own public address Specify your own public address Accept command line and JSON-RPC commands Accept command line and JSON-RPC commands Distributed under the MIT software license, see the accompanying file %s or %s Distributed under the MIT software license, see the accompanying file %s or %s. If <category> is not supplied or if <category> = 1, output all debugging information. If <category> is not supplied or if <category> = 1, output all debugging information. Prune configured below the minimum of %d MiB. Please use a higher number. Prune configured below the minimum of %d MiB. Please use a higher number. Prune: last wallet synchronisation goes beyond pruned data. You need to -reindex (download the whole blockchain again in case of pruned node) Prune: last wallet synchronisation goes beyond pruned data. You need to -reindex (download the whole blockchain again in case of pruned node) Rescans are not possible in pruned mode. You will need to use -reindex which will download the whole blockchain again. Rescans are not possible in pruned mode. You will need to use -reindex which will download the whole blockchain again. Error: A fatal internal error occurred, see debug.log for details Error: A fatal internal error occurred, see debug.log for details Fee (in %s/kB) to add to transactions you send (default: %s) Fee (in %s/kB) to add to transactions you send (default: %s) Pruning blockstore... Pruning blockstore... Run in the background as a daemon and accept commands Run in the background as a daemon and accept commands Unable to start HTTP server. See debug log for details. Unable to start HTTP server. See debug log for details. Bitcoin Core Bitcoin Core The %s developers The %s developers A fee rate (in %s/kB) that will be used when fee estimation has insufficient data (default: %s) A fee rate (in %s/kB) that will be used when fee estimation has insufficient data (default: %s) Accept relayed transactions received from whitelisted peers even when not relaying transactions (default: %d) Accept relayed transactions received from whitelisted peers even when not relaying transactions (default: %d) Add a node to connect to and attempt to keep the connection open (see the `addnode` RPC command help for more info) Add a node to connect to and attempt to keep the connection open (see the `addnode` RPC command help for more info). Bind to given address and always listen on it. Use [host]:port notation for IPv6 Bind to given address and always listen on it. Use [host]:port notation for IPv6 Cannot obtain a lock on data directory %s. %s is probably already running. Cannot obtain a lock on data directory %s. %s is probably already running. Cannot provide specific connections and have addrman find outgoing connections at the same. Cannot provide specific connections and have addrman find outgoing connections at the same. Connect only to the specified node(s); -connect=0 disables automatic connections (the rules for this peer are the same as for -addnode) Connect only to the specified node(s); -connect=0 disables automatic connections (the rules for this peer are the same as for -addnode). Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup Error reading %s! All keys read correctly, but transaction data or address book entries might be missing or incorrect. Error reading %s! All keys read correctly, but transaction data or address book entries might be missing or incorrect. Exclude debugging information for a category. Can be used in conjunction with -debug=1 to output debug logs for all categories except one or more specified categories. Exclude debugging information for a category. Can be used in conjunction with -debug=1 to output debug logs for all categories except one or more specified categories. Execute command when a wallet transaction changes (%s in cmd is replaced by TxID) Execute command when a wallet transaction changes (%s in cmd is replaced by TxID) Extra transactions to keep in memory for compact block reconstructions (default: %u) Extra transactions to keep in memory for compact block reconstructions (default: %u). If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: %s, testnet: %s) If this block is in the chain assume that it and its ancestors are valid and potentially skip their script verification (0 to verify all, default: %s, testnet: %s). Maximum allowed median peer time offset adjustment. Local perspective of time may be influenced by peers forward or backward by this amount. (default: %u seconds) Maximum allowed median peer time offset adjustment. Local perspective of time may be influenced by peers forward or backward by this amount. (default: %u seconds) Maximum total fees (in %s) to use in a single wallet transaction or raw transaction; setting this too low may abort large transactions (default: %s) Maximum total fees (in %s) to use in a single wallet transaction or raw transaction; setting this too low may abort large transactions (default: %s) Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly. Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly. Please contribute if you find %s useful. Visit %s for further information about the software. Please contribute if you find %s useful. Visit %s for further information about the software. Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect used) Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect used). Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks, and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with -txindex and -rescan. Warning: Reverting this setting requires re-downloading the entire blockchain. (default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >%u = automatically prune block files to stay under the specified target size in MiB) Reduce storage requirements by enabling pruning (deleting) of old blocks. This allows the pruneblockchain RPC to be called to delete specific blocks and enables automatic pruning of old blocks if a target size in MiB is provided. This mode is incompatible with -txindex and -rescan. Warning: Reverting this setting requires re-downloading the entire blockchain. (default: 0 = disable pruning blocks, 1 = allow manual pruning via RPC, >%u = automatically prune block files to stay under the specified target size in MiB) Set lowest fee rate (in %s/kB) for transactions to be included in block creation. (default: %s) Set lowest fee rate (in %s/kB) for transactions to be included in block creation (default: %s). Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d) Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d) The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correct The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correct This is a pre-release test build - use at your own risk - do not use for mining or merchant applications This is a pre-release test build - use at your own risk - do not use for mining or merchant applications This is the transaction fee you may discard if change is smaller than dust at this level This is the transaction fee you may discard if change is smaller than dust at this level. Unable to replay blocks. You will need to rebuild the database using -reindex-chainstate. Unable to replay blocks. You will need to rebuild the database using -reindex-chainstate. Unable to rewind the database to a pre-fork state. You will need to redownload the blockchain Unable to rewind the database to a pre-fork state. You will need to re-download the blockchain Use UPnP to map the listening port (default: 1 when listening and no -proxy) Use UPnP to map the listening port (default: 1 when listening and no -proxy) Username and hashed password for JSON-RPC connections. The field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A canonical python script is included in share/rpcuser. The client then connects normally using the rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This option can be specified multiple times Username and hashed password for JSON-RPC connections. The field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A canonical python script is included in share/rpcuser. The client then connects normally using the rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This option can be specified multiple times. Wallet will not create transactions that violate mempool chain limits (default: %u) Wallet will not create transactions that violate mempool chain limits (default: %u). Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues. Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues. Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade. Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade. Whether to save the mempool on shutdown and load on restart (default: %u) Whether to save the mempool on shutdown and load on restart (default: %u). %d of last 100 blocks have unexpected version %d of last 100 blocks have unexpected version. %s corrupt, salvage failed %s corrupt, salvage failed -maxmempool must be at least %d MB -maxmempool must be at least %d MB <category> can be: <category> can be: Accept connections from outside (default: 1 if no -proxy or -connect) Accept connections from outside (default: 1 if no -proxy or -connect) Append comment to the user agent string Append comment to the user agent string Attempt to recover private keys from a corrupt wallet on startup Attempt to recover private keys from a corrupt wallet on startup Block creation options: Block creation options: Cannot resolve -%s address: '%s' Cannot resolve -%s address: '%s' Chain selection options: Chain selection options: Change index out of range Change index out of range Connection options: Connection options: Copyright (C) %i-%i Copyright (C) %i-%i Corrupted block database detected Corrupted block database detected Debugging/Testing options: Debugging/Testing options: Do not load the wallet and disable wallet RPC calls Do not load the wallet and disable wallet RPC calls Do you want to rebuild the block database now? Do you want to rebuild the block database now? Enable publish hash block in <address> Enable publish hash block in <address> Enable publish hash transaction in <address> Enable publish hash transaction in <address> Enable publish raw block in <address> Enable publish raw block in <address> Enable publish raw transaction in <address> Enable publish raw transaction in <address> Enable transaction replacement in the memory pool (default: %u) Enable transaction replacement in the memory pool (default: %u) Error creating %s: You can't create non-HD wallets with this version. Error creating %s: You can't create non-HD wallets with this version. Error initializing block database Error initialising block database Error initializing wallet database environment %s! Error initialising wallet database environment %s! Error loading %s Error loading %s Error loading %s: Wallet corrupted Error loading %s: Wallet corrupted Error loading %s: Wallet requires newer version of %s Error loading %s: Wallet requires newer version of %s Error loading block database Error loading block database Error opening block database Error opening block database Error: Disk space is low! Error: Disk space is low! Failed to listen on any port. Use -listen=0 if you want this. Failed to listen on any port. Use -listen=0 if you want this. Failed to rescan the wallet during initialization Failed to rescan the wallet during initialisation. Importing... Importing... Incorrect or no genesis block found. Wrong datadir for network? Incorrect or no genesis block found. Wrong datadir for network? Initialization sanity check failed. %s is shutting down. Initialisation sanity check failed. %s is shutting down. Invalid amount for -%s=<amount>: '%s' Invalid amount for -%s=<amount>: '%s' Invalid amount for -discardfee=<amount>: '%s' Invalid amount for -discardfee=<amount>: '%s' Invalid amount for -fallbackfee=<amount>: '%s' Invalid amount for -fallbackfee=<amount>: '%s' Keep the transaction memory pool below <n> megabytes (default: %u) Keep the transaction memory pool below <n> megabytes (default: %u) Loading P2P addresses... Loading P2P addresses... Loading banlist... Loading banlist... Location of the auth cookie (default: data dir) Location of the auth cookie (default: data dir) Not enough file descriptors available. Not enough file descriptors available. Only connect to nodes in network <net> (ipv4, ipv6 or onion) Only connect to nodes in network <net> (ipv4, ipv6 or onion) Print this help message and exit Print this help message and exit Print version and exit Print version and exit Prune cannot be configured with a negative value. Prune cannot be configured with a negative value. Prune mode is incompatible with -txindex. Prune mode is incompatible with -txindex. Rebuild chain state and block index from the blk*.dat files on disk Rebuild chain state and block index from the blk*.dat files on disk Rebuild chain state from the currently indexed blocks Rebuild chain state from the currently indexed blocks Replaying blocks... Replaying blocks... Rewinding blocks... Rewinding blocks... Send transactions with full-RBF opt-in enabled (RPC only, default: %u) Send transactions with full-RBF opt-in enabled (RPC only, default: %u). Set database cache size in megabytes (%d to %d, default: %d) Set database cache size in megabytes (%d to %d, default: %d) Specify wallet file (within data directory) Specify wallet file (within data directory) The source code is available from %s. The source code is available from %s. Transaction fee and change calculation failed Transaction fee and change calculation failed. Unable to bind to %s on this computer. %s is probably already running. Unable to bind to %s on this computer. %s is probably already running. Unsupported argument -benchmark ignored, use -debug=bench. Unsupported argument -benchmark ignored, use -debug=bench. Unsupported argument -debugnet ignored, use -debug=net. Unsupported argument -debugnet ignored, use -debug=net. Unsupported argument -tor found, use -onion. Unsupported argument -tor found, use -onion. Unsupported logging category %s=%s. Unsupported logging category %s=%s. Upgrading UTXO database Upgrading UTXO database Use UPnP to map the listening port (default: %u) Use UPnP to map the listening port (default: %u) Use the test chain Use the test chain User Agent comment (%s) contains unsafe characters. User Agent comment (%s) contains unsafe characters. Verifying blocks... Verifying blocks... Wallet debugging/testing options: Wallet debugging/testing options: Wallet needed to be rewritten: restart %s to complete Wallet needed to be rewritten: restart %s to complete Wallet options: Wallet options: Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6 Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6 Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality) Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality) Discover own IP addresses (default: 1 when listening and no -externalip or -proxy) Discover own IP addresses (default: 1 when listening and no -externalip or -proxy) Error: Listening for incoming connections failed (listen returned error %s) Error: Listening for incoming connections failed (listen returned error %s) Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message) Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message) Fees (in %s/kB) smaller than this are considered zero fee for relaying, mining and transaction creation (default: %s) Fees (in %s/kB) smaller than this are considered zero fee for relaying, mining and transaction creation (default: %s) If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u) If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u) Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions) Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions) Maximum size of data in data carrier transactions we relay and mine (default: %u) Maximum size of data in data carrier transactions we relay and mine (default: %u) Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u) Randomise credentials for every proxy connection. This enables Tor stream isolation (default: %u) The transaction amount is too small to send after the fee has been deducted The transaction amount is too small to send after the fee has been deducted Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain (default: %u) (default: %u) Accept public REST requests (default: %u) Accept public REST requests (default: %u) Automatically create Tor hidden service (default: %d) Automatically create Tor hidden service (default: %d) Connect through SOCKS5 proxy Connect through SOCKS5 proxy Error loading %s: You can't disable HD on an already existing HD wallet Error loading %s: you can't disable HD on an already existing HD wallet. Error reading from database, shutting down. Error reading from database, shutting down. Error upgrading chainstate database Error upgrading chainstate database. Imports blocks from external blk000??.dat file on startup Imports blocks from external blk000??.dat file on startup Information Information Invalid -onion address or hostname: '%s' Invalid -onion address or hostname: '%s' Invalid -proxy address or hostname: '%s' Invalid -proxy address or hostname: '%s' Invalid amount for -paytxfee=<amount>: '%s' (must be at least %s) Invalid amount for -paytxfee=<amount>: '%s' (must be at least %s) Invalid netmask specified in -whitelist: '%s' Invalid netmask specified in -whitelist: '%s' Keep at most <n> unconnectable transactions in memory (default: %u) Keep at most <n> unconnectable transactions in memory (default: %u) Need to specify a port with -whitebind: '%s' Need to specify a port with -whitebind: '%s' Node relay options: Node relay options: RPC server options: RPC server options: Reducing -maxconnections from %d to %d, because of system limitations. Reducing -maxconnections from %d to %d, because of system limitations. Rescan the block chain for missing wallet transactions on startup Rescan the block chain for missing wallet transactions on startup Send trace/debug info to console instead of debug.log file Send trace/debug info to console instead of debug.log file Show all debugging options (usage: --help -help-debug) Show all debugging options (usage: --help -help-debug) Shrink debug.log file on client startup (default: 1 when no -debug) Shrink debug.log file on client startup (default: 1 when no -debug) Signing transaction failed Signing transaction failed Specified -walletdir "%s" does not exist Specified -walletdir "%s" does not exist. Specified -walletdir "%s" is a relative path Specified -walletdir "%s" is a relative path. Specified -walletdir "%s" is not a directory Specified -walletdir "%s" is not a directory. The transaction amount is too small to pay the fee The transaction amount is too small to pay the fee This is experimental software. This is experimental software. Tor control port password (default: empty) Tor control port password (default: empty) Tor control port to use if onion listening enabled (default: %s) Tor control port to use if onion listening enabled (default: %s) Transaction amount too small Transaction amount too small Transaction too large for fee policy Transaction too large for fee policy Transaction too large Transaction too large Unable to bind to %s on this computer (bind returned error %s) Unable to bind to %s on this computer (bind returned error %s) Unable to generate initial keys Unable to generate initial keys. Upgrade wallet to latest format on startup Upgrade wallet to latest format on startup Username for JSON-RPC connections Username for JSON-RPC connections Verifying wallet(s)... Verifying wallet(s)... Wallet %s resides outside wallet directory %s Wallet %s resides outside wallet directory %s Warning Warning Warning: unknown new rules activated (versionbit %i) Warning: unknown new rules activated (versionbit %i) Whether to operate in a blocks only mode (default: %u) Whether to operate in a blocks only mode (default: %u) You need to rebuild the database using -reindex to change -txindex You need to rebuild the database using -reindex to change -txindex Zapping all transactions from wallet... Zapping all transactions from wallet... ZeroMQ notification options: ZeroMQ notification options: Password for JSON-RPC connections Password for JSON-RPC connections Execute command when the best block changes (%s in cmd is replaced by block hash) Execute command when the best block changes (%s in cmd is replaced by block hash) Allow DNS lookups for -addnode, -seednode and -connect Allow DNS lookups for -addnode, -seednode and -connect (1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data) (1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data) -maxtxfee is set very high! Fees this large could be paid on a single transaction. -maxtxfee is set very high! Fees this large could be paid on a single transaction. Bind to given address to listen for JSON-RPC connections. This option is ignored unless -rpcallowip is also passed. Port is optional and overrides -rpcport. Use [host]:port notation for IPv6. This option can be specified multiple times (default: 127.0.0.1 and ::1 i.e., localhost, or if -rpcallowip has been specified, 0.0.0.0 and :: i.e., all addresses) Bind to given address to listen for JSON-RPC connections. This option is ignored unless -rpcallowip is also passed. Port is optional and overrides -rpcport. Use [host]:port notation for IPv6. This option can be specified multiple times (default: 127.0.0.1 and ::1 i.e., localhost, or if -rpcallowip has been specified, 0.0.0.0 and :: i.e., all addresses). Do not keep transactions in the mempool longer than <n> hours (default: %u) Do not keep transactions in the mempool longer than <n> hours (default: %u) Equivalent bytes per sigop in transactions for relay and mining (default: %u) Equivalent bytes per sigop in transactions for relay and mining (default: %u) Error loading %s: You can't enable HD on an already existing non-HD wallet Error loading %s: you can't enable HD on an already existing non-HD wallet. Error loading wallet %s. -wallet parameter must only specify a filename (not a path). Error loading wallet %s. The -wallet parameter must only specify a filename (not a path). Fees (in %s/kB) smaller than this are considered zero fee for transaction creation (default: %s) Fees (in %s/kB) smaller than this are considered zero fee for transaction creation (default: %s) Force relay of transactions from whitelisted peers even if they violate local relay policy (default: %d) Force relay of transactions from whitelisted peers, even if they violate local relay policy (default: %d). How thorough the block verification of -checkblocks is (0-4, default: %u) How thorough the block verification of -checkblocks is (0-4, default: %u) Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u) Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u) Number of seconds to keep misbehaving peers from reconnecting (default: %u) Number of seconds to keep misbehaving peers from reconnecting (default: %u) Output debugging information (default: %u, supplying <category> is optional) Output debugging information (default: %u, supplying <category> is optional) Set maximum BIP141 block weight to this * 4. Deprecated, use blockmaxweight Set maximum BIP141 block weight to this * 4. Deprecated, use blockmaxweight. Sets the serialization of raw transaction or block hex returned in non-verbose mode, non-segwit(0) or segwit(1) (default: %d) Sets the serialisation of raw transaction or block hex returned in non-verbose mode, non-segwit(0) or segwit(1) (default: %d). Specify directory to hold wallets (default: <datadir>/wallets if it exists, otherwise <datadir>) Specify directory to hold wallets (default: <datadir>/wallets if it exists, otherwise <datadir>). Specify location of debug log file: this can be an absolute path or a path relative to the data directory (default: %s) Specify location of debug log file: this can be an absolute path or a path relative to the data directory (default: %s). Support filtering of blocks and transaction with bloom filters (default: %u) Support filtering of blocks and transaction with bloom filters (default: %u) The fee rate (in %s/kB) that indicates your tolerance for discarding change by adding it to the fee (default: %s). Note: An output is discarded if it is dust at this rate, but we will always discard up to the dust relay fee and a discard fee above that is limited by the fee estimate for the longest target The fee rate (in %s/kB) that indicates your tolerance for discarding change by adding it to the fee (default: %s). Note: An output is discarded if it is dust at this rate, but we will always discard up to the dust relay fee and a discard fee above that is limited by the fee estimate for the longest target. This is the transaction fee you may pay when fee estimates are not available. This is the transaction fee you may pay when fee estimates are not available. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit %s and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit %s and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard. Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments. Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments. Tries to keep outbound traffic under the given target (in MiB per 24h), 0 = no limit (default: %d) Tries to keep outbound traffic under the given target (in MiB per 24h), 0 = no limit (default: %d) Unsupported argument -socks found. Setting SOCKS version isn't possible anymore, only SOCKS5 proxies are supported. Unsupported argument -socks found. Setting SOCKS version isn't possible anymore, only SOCKS5 proxies are supported. Unsupported argument -whitelistalwaysrelay ignored, use -whitelistrelay and/or -whitelistforcerelay. Unsupported argument -whitelistalwaysrelay ignored, use -whitelistrelay and/or -whitelistforcerelay. Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s) Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s) Warning: Unknown block versions being mined! It's possible unknown rules are in effect Warning: Unknown block versions being mined! It's possible unknown rules are in effect Warning: Wallet file corrupt, data salvaged! Original %s saved as %s in %s; if your balance or transactions are incorrect you should restore from a backup. Warning: Wallet file corrupt, data salvaged! Original %s saved as %s in %s; if your balance or transactions are incorrect you should restore from a backup. Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple times. Whitelist peers connecting from the given IP address (e.g. 1.2.3.4) or CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple times. %s is set very high! %s is set very high! (default: %s) (default: %s) Always query for peer addresses via DNS lookup (default: %u) Always query for peer addresses via DNS lookup (default: %u) Error loading wallet %s. -wallet filename must be a regular file. Error loading wallet %s. The -wallet filename must be a regular file. Error loading wallet %s. Duplicate -wallet filename specified. Error loading wallet %s. Duplicate -wallet filename specified. Error loading wallet %s. Invalid characters in -wallet filename. Error loading wallet %s. Invalid characters in -wallet filename. How many blocks to check at startup (default: %u, 0 = all) How many blocks to check at startup (default: %u, 0 = all) Include IP addresses in debug output (default: %u) Include IP addresses in debug output (default: %u) Keypool ran out, please call keypoolrefill first Keypool ran out, please call keypoolrefill first. Listen for JSON-RPC connections on <port> (default: %u or testnet: %u) Listen for JSON-RPC connections on <port> (default: %u or testnet: %u) Listen for connections on <port> (default: %u or testnet: %u) Listen for connections on <port> (default: %u or testnet: %u) Maintain at most <n> connections to peers (default: %u) Maintain at most <n> connections to peers (default: %u) Make the wallet broadcast transactions Make the wallet broadcast transactions Maximum per-connection receive buffer, <n>*1000 bytes (default: %u) Maximum per-connection receive buffer, <n>*1000 bytes (default: %u) Maximum per-connection send buffer, <n>*1000 bytes (default: %u) Maximum per-connection send buffer, <n>*1000 bytes (default: %u) Prepend debug output with timestamp (default: %u) Prepend debug output with timestamp (default: %u) Relay and mine data carrier transactions (default: %u) Relay and mine data carrier transactions (default: %u) Relay non-P2SH multisig (default: %u) Relay non-P2SH multisig (default: %u) Set key pool size to <n> (default: %u) Set key pool size to <n> (default: %u) Set maximum BIP141 block weight (default: %d) Set maximum BIP141 block weight (default: %d) Set the number of threads to service RPC calls (default: %d) Set the number of threads to service RPC calls (default: %d) Specify configuration file (default: %s) Specify configuration file (default: %s) Specify connection timeout in milliseconds (minimum: 1, default: %d) Specify connection timeout in milliseconds (minimum: 1, default: %d) Specify pid file (default: %s) Specify pid file (default: %s) Spend unconfirmed change when sending transactions (default: %u) Spend unconfirmed change when sending transactions (default: %u) Starting network threads... Starting network threads... The wallet will avoid paying less than the minimum relay fee. The wallet will avoid paying less than the minimum relay fee. This is the minimum transaction fee you pay on every transaction. This is the minimum transaction fee you pay on every transaction. This is the transaction fee you will pay if you send a transaction. This is the transaction fee you will pay if you send a transaction. Threshold for disconnecting misbehaving peers (default: %u) Threshold for disconnecting misbehaving peers (default: %u) Transaction amounts must not be negative Transaction amounts must not be negative. Transaction has too long of a mempool chain Transaction has too long of a mempool chain. Transaction must have at least one recipient Transaction must have at least one recipient. Unknown network specified in -onlynet: '%s' Unknown network specified in -onlynet: '%s' Insufficient funds Insufficient funds Loading block index... Loading block index... Loading wallet... Loading wallet... Cannot downgrade wallet Cannot downgrade wallet Rescanning... Rescanning... Done loading Done loading Error Error