AddressBookPage Right-click to edit address or label Create a new address Create a new address &New Copy the currently selected address to the system clipboard Copy the currently selected address to the system clipboard &Copy C&lose Delete the currently selected address from the list Delete the currently selected address from the list Enter address or label to search Export the data in the current tab to a file Export the data in the current tab to a file &Export &Export &Delete &Delete Choose the address to send coins to Choose the address to receive coins with C&hoose Sending addresses Receiving addresses These are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins. These are your Bitcoin addresses for receiving payments. Use the 'Create new receiving address' button in the receive tab to create new addresses. Signing is only possible with addresses of the type 'legacy'. &Copy Address Copy &Label &Edit Export Address List Comma separated file Expanded name of the CSV file format. See: https://en.wikipedia.org/wiki/Comma-separated_values. There was an error trying to save the address list to %1. Please try again. An error message. %1 is a stand-in argument for the name of the file we attempted to save to. Exporting Failed AddressTableModel Label Address (no label) AskPassphraseDialog Passphrase Dialog Passphrase Dialog Enter passphrase Enter passphrase New passphrase New passphrase Repeat new passphrase Repeat new passphrase Show passphrase Encrypt wallet This operation needs your wallet passphrase to unlock the wallet. Unlock wallet Change passphrase Confirm wallet encryption Warning: If you encrypt your wallet and lose your passphrase, you will LOSE ALL OF YOUR BITCOINS! Are you sure you wish to encrypt your wallet? Wallet encrypted Enter the new passphrase for the wallet. Please use a passphrase of ten or more random characters, or eight or more words. Enter the old passphrase and new passphrase for the wallet. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer. Wallet to be encrypted Your wallet is about to be encrypted. Your wallet is now encrypted. IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet. Wallet encryption failed Wallet encryption failed due to an internal error. Your wallet was not encrypted. The supplied passphrases do not match. Wallet unlock failed The passphrase entered for the wallet decryption was incorrect. Wallet passphrase was successfully changed. Warning: The Caps Lock key is on! BanTableModel IP/Netmask Banned Until BitcoinApplication Runaway exception A fatal error occurred. %1 can no longer continue safely and will quit. Internal error An internal error occurred. %1 will attempt to continue safely. This is an unexpected bug which can be reported as described below. BitcoinGUI &Overview &Overview Show general overview of wallet Show general overview of wallet &Transactions &Transactions Browse transaction history Browse transaction history E&xit E&xit Quit application Quit application &About %1 Show information about %1 About &Qt About &Qt Show information about Qt Show information about Qt Modify configuration options for %1 Create a new wallet &Minimize Wallet: Network activity disabled. A substring of the tooltip. Proxy is enabled: %1 Send coins to a Bitcoin address Send coins to a Bitcoin address Backup wallet to another location Backup wallet to another location Change the passphrase used for wallet encryption Change the passphrase used for wallet encryption &Send &Send &Receive &Receive &Options… &Encrypt Wallet… Encrypt the private keys that belong to your wallet Encrypt the private keys that belong to your wallet &Backup Wallet… &Change Passphrase… Sign &message… Sign messages with your Bitcoin addresses to prove you own them Sign messages with your Bitcoin addresses to prove you own them &Verify message… Verify messages to ensure they were signed with specified Bitcoin addresses Verify messages to ensure they were signed with specified Bitcoin addresses &Load PSBT from file… Open &URI… Close Wallet… Create Wallet… Close All Wallets… &File &File &Settings &Settings &Help &Help Tabs toolbar Tabs toolbar Syncing Headers (%1%)… Synchronizing with network… Indexing blocks on disk… Processing blocks on disk… Reindexing blocks on disk… Connecting to peers… Request payments (generates QR codes and bitcoin: URIs) Show the list of used sending addresses and labels Show the list of used receiving addresses and labels &Command-line options Processed %n block(s) of transaction history. Processed %n block of transaction history. Processed %n blocks of transaction history. %1 behind %1 behind Catching up… Last received block was generated %1 ago. Last received block was generated %1 ago. Transactions after this will not yet be visible. Transactions after this will not yet be visible. Error Error Warning Warning Information Information Up to date Up to date Load Partially Signed Bitcoin Transaction Load PSBT from &clipboard… Load Partially Signed Bitcoin Transaction from clipboard Node window Open node debugging and diagnostic console &Sending addresses &Receiving addresses Open a bitcoin: URI Open Wallet Open a wallet Close wallet Close all wallets Show the %1 help message to get a list with possible Bitcoin command-line options &Mask values Mask the values in the Overview tab default wallet No wallets available &Window &Window Zoom Main Window %1 client &Hide S&how %n active connection(s) to Bitcoin network. A substring of the tooltip. %n active connection to Bitcoin network. %n active connections to Bitcoin network. Click for more actions. A substring of the tooltip. "More actions" are available via the context menu. Show Peers tab A context menu item. The "Peers tab" is an element of the "Node window". Disable network activity A context menu item. Enable network activity A context menu item. The network activity was disabled previously. Error: %1 Warning: %1 Date: %1 Amount: %1 Wallet: %1 Type: %1 Label: %1 Address: %1 Sent transaction Sent transaction Incoming transaction Incoming transaction HD key generation is enabled HD key generation is disabled Private key disabled Wallet is encrypted and currently unlocked Wallet is encrypted and currently unlocked Wallet is encrypted and currently locked Wallet is encrypted and currently locked Original message: CoinControlDialog Coin Selection Quantity: Bytes: Amount: Fee: Dust: After Fee: Change: (un)select all Tree mode List mode Amount Amount Received with label Received with address Date Date Confirmations Confirmed Confirmed Copy amount &Copy address Copy &label Copy &amount Copy transaction &ID and output index L&ock unspent &Unlock unspent Copy quantity Copy fee Copy after fee Copy bytes Copy dust Copy change (%1 locked) yes no This label turns red if any recipient receives an amount smaller than the current dust threshold. Can vary +/- %1 satoshi(s) per input. (no label) change from %1 (%2) (change) CreateWalletActivity Create Wallet Title of window indicating the progress of creation of a new wallet. Creating Wallet %1… Descriptive text of the create wallet progress window which indicates to the user which wallet is currently being created. Create wallet failed Create wallet warning Can't list signers CreateWalletDialog Create Wallet Wallet Name Wallet Encrypt the wallet. The wallet will be encrypted with a passphrase of your choice. Encrypt Wallet Advanced Options Disable private keys for this wallet. Wallets with private keys disabled will have no private keys and cannot have an HD seed or imported private keys. This is ideal for watch-only wallets. Disable Private Keys Make a blank wallet. Blank wallets do not initially have private keys or scripts. Private keys and addresses can be imported, or an HD seed can be set, at a later time. Make Blank Wallet Use descriptors for scriptPubKey management Descriptor Wallet Use an external signing device such as a hardware wallet. Configure the external signer script in wallet preferences first. External signer Create Compiled without sqlite support (required for descriptor wallets) Compiled without external signing support (required for external signing) "External signing" means using devices such as hardware wallets. EditAddressDialog Edit Address Edit Address &Label &Label The label associated with this address list entry The address associated with this address list entry. This can only be modified for sending addresses. &Address &Address New sending address Edit receiving address Edit sending address The entered address "%1" is not a valid Bitcoin address. Address "%1" already exists as a receiving address with label "%2" and so cannot be added as a sending address. The entered address "%1" is already in the address book with label "%2". Could not unlock wallet. New key generation failed. FreespaceChecker A new data directory will be created. A new data directory will be created. name name Directory already exists. Add %1 if you intend to create a new directory here. Directory already exists. Add %1 if you intend to create a new directory here. Path already exists, and is not a directory. Path already exists, and is not a directory. Cannot create data directory here. Cannot create data directory here. HelpMessageDialog version version About %1 Command-line options Intro Welcome Welcome Welcome to %1. As this is the first time the program is launched, you can choose where %1 will store its data. When you click OK, %1 will begin to download and process the full %4 block chain (%2GB) starting with the earliest transactions in %3 when %4 initially launched. Limit block chain storage to Reverting this setting requires re-downloading the entire blockchain. It is faster to download the full chain first and prune it later. Disables some advanced features. GB This initial synchronisation is very demanding, and may expose hardware problems with your computer that had previously gone unnoticed. Each time you run %1, it will continue downloading where it left off. If you have chosen to limit block chain storage (pruning), the historical data must still be downloaded and processed, but will be deleted afterward to keep your disk usage low. Use the default data directory Use the default data directory Use a custom data directory: Use a custom data directory: Bitcoin Bitcoin %1 GB of space available (of %1 GB needed) (%1 GB needed for full chain) At least %1 GB of data will be stored in this directory, and it will grow over time. Approximately %1 GB of data will be stored in this directory. (sufficient to restore backups %n day(s) old) Explanatory text on the capability of the current prune target. (sufficient to restore backups %n day old) (sufficient to restore backups %n days old) %1 will download and store a copy of the Bitcoin block chain. The wallet will also be stored in this directory. Error: Specified data directory "%1" cannot be created. Error Error LoadWalletsActivity Load Wallets Title of progress window which is displayed when wallets are being loaded. Loading wallets… Descriptive text of the load wallets progress window which indicates to the user that wallets are currently being loaded. ModalOverlay Form Form Recent transactions may not yet be visible, and therefore your wallet's balance might be incorrect. This information will be correct once your wallet has finished synchronizing with the bitcoin network, as detailed below. Attempting to spend bitcoins that are affected by not-yet-displayed transactions will not be accepted by the network. Number of blocks left Unknown… calculating… Last block time Last block time Progress Progress increase per hour Estimated time left until synced Hide Esc %1 is currently syncing. It will download headers and blocks from peers and validate them until reaching the tip of the block chain. Unknown. Syncing Headers (%1, %2%)… OpenURIDialog Open bitcoin URI URI: Paste address from clipboard Tooltip text for button that allows you to paste an address that is in your clipboard. Paste address from clipboard OpenWalletActivity Open wallet failed Open wallet warning default wallet Open Wallet Title of window indicating the progress of opening of a wallet. Opening Wallet %1… Descriptive text of the open wallet progress window which indicates to the user which wallet is currently being opened. OptionsDialog Options Options &Main &Main Automatically start %1 after logging in to the system. &Start %1 on system login Enabling pruning significantly reduces the disk space required to store transactions. All blocks are still fully validated. Reverting this setting requires re-downloading the entire blockchain. Size of &database cache Number of script &verification threads IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1) Shows if the supplied default SOCKS5 proxy is used to reach peers via this network type. Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Exit in the menu. Open the %1 configuration file from the working directory. Open Configuration File Reset all client options to default. Reset all client options to default. &Reset Options &Reset Options &Network &Network Prune &block storage to GB Reverting this setting requires re-downloading the entire blockchain. Maximum database cache size. A larger cache can contribute to faster sync, after which the benefit is less pronounced for most use cases. Lowering the cache size will reduce memory usage. Unused mempool memory is shared for this cache. Tooltip text for Options window setting that sets the size of the database cache. Explains the corresponding effects of increasing/decreasing this value. MiB Set the number of script verification threads. Negative values correspond to the number of cores you want to leave free to the system. Tooltip text for Options window setting that sets the number of script verification threads. Explains that negative values mean to leave these many cores free to the system. (0 = auto, <0 = leave that many cores free) This allows you or a third party tool to communicate with the node through command-line and JSON-RPC commands. Tooltip text for Options window setting that enables the RPC server. Enable R&PC server An Options window setting to enable the RPC server. W&allet Whether to set subtract fee from amount as default or not. Tooltip text for Options window setting that sets subtracting the fee from a sending amount as default. Subtract &fee from amount by default An Options window setting to set subtracting the fee from a sending amount as default. Expert Enable coin &control features If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed. &Spend unconfirmed change Enable &PSBT controls An options window setting to enable PSBT controls. Whether to show PSBT controls. Tooltip text for options window setting that enables PSBT controls. External Signer (e.g. hardware wallet) &External signer script path Full path to a Bitcoin Core compatible script (e.g. C:\Downloads\hwi.exe or /Users/you/Downloads/hwi.py). Beware: malware can steal your coins! Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled. Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled. Map port using &UPnP Map port using &UPnP Automatically open the Bitcoin client port on the router. This only works when your router supports NAT-PMP and it is enabled. The external port could be random. Map port using NA&T-PMP Accept connections from outside. Allow incomin&g connections Connect to the Bitcoin network through a SOCKS5 proxy. &Connect through SOCKS5 proxy (default proxy): Proxy &IP: Proxy &IP: &Port: &Port: Port of the proxy (e.g. 9050) Port of the proxy (e.g. 9050) Used for reaching peers via: IPv4 IPv6 Tor &Window &Window Show the icon in the system tray. &Show tray icon Show only a tray icon after minimizing the window. Show only a tray icon after minimizing the window. &Minimize to the tray instead of the taskbar &Minimize to the tray instead of the taskbar M&inimize on close M&inimize on close &Display &Display User Interface &language: User Interface &language: The user interface language can be set here. This setting will take effect after restarting %1. &Unit to show amounts in: &Unit to show amounts in: Choose the default subdivision unit to show in the interface and when sending coins. Choose the default subdivision unit to show in the interface and when sending coins. Third-party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |. &Third-party transaction URLs Whether to show coin control features or not. Connect to the Bitcoin network through a separate SOCKS5 proxy for Tor onion services. Use separate SOCKS&5 proxy to reach peers via Tor onion services: Monospaced font in the Overview tab: embedded "%1" closest matching "%1" Options set in this dialog are overridden by the command line or in the configuration file: &OK &OK &Cancel &Cancel Compiled without external signing support (required for external signing) "External signing" means using devices such as hardware wallets. default default none Confirm options reset Confirm options reset Client restart required to activate changes. Client will be shut down. Do you want to proceed? Configuration options Window title text of pop-up box that allows opening up of configuration file. The configuration file is used to specify advanced user options which override GUI settings. Additionally, any command-line options will override this configuration file. Explanatory text about the priority order of instructions considered by client. The order from high to low being: command-line, configuration file, GUI settings. Continue Cancel Error Error The configuration file could not be opened. This change would require a client restart. The supplied proxy address is invalid. The supplied proxy address is invalid. OverviewPage Form Form The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet. The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet. Watch-only: Available: Your current spendable balance Your current spendable balance Pending: Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance Immature: Immature: Mined balance that has not yet matured Mined balance that has not yet matured Balances Total: Total: Your current total balance Your current total balance Your current balance in watch-only addresses Spendable: Recent transactions Unconfirmed transactions to watch-only addresses Mined balance in watch-only addresses that has not yet matured Current total balance in watch-only addresses Privacy mode activated for the Overview tab. To unmask the values, uncheck Settings->Mask values. PSBTOperationsDialog Dialog Sign Tx Broadcast Tx Copy to Clipboard Save… Close Failed to load transaction: %1 Failed to sign transaction: %1 Cannot sign inputs while wallet is locked. Could not sign any more inputs. Signed %1 inputs, but more signatures are still required. Signed transaction successfully. Transaction is ready to broadcast. Unknown error processing transaction. Transaction broadcast successfully! Transaction ID: %1 Transaction broadcast failed: %1 PSBT copied to clipboard. Save Transaction Data Partially Signed Transaction (Binary) Expanded name of the binary PSBT file format. See: BIP 174. PSBT saved to disk. * Sends %1 to %2 Unable to calculate transaction fee or total transaction amount. Pays transaction fee: Total Amount or Transaction has %1 unsigned inputs. Transaction is missing some information about inputs. Transaction still needs signature(s). (But no wallet is loaded.) (But this wallet cannot sign transactions.) (But this wallet does not have the right keys.) Transaction is fully signed and ready for broadcast. Transaction status is unknown. PaymentServer Payment request error Cannot start bitcoin: click-to-pay handler URI handling 'bitcoin://' is not a valid URI. Use 'bitcoin:' instead. Cannot process payment request because BIP70 is not supported. Due to widespread security flaws in BIP70 it's strongly recommended that any merchant instructions to switch wallets be ignored. If you are receiving this error you should request the merchant provide a BIP21 compatible URI. URI cannot be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters. Payment request file handling PeerTableModel User Agent Title of Peers Table column which contains the peer's User Agent string. Ping Title of Peers Table column which indicates the current latency of the connection with the peer. Peer Title of Peers Table column which contains a unique number used to identify a connection. Direction Title of Peers Table column which indicates the direction the peer connection was initiated from. Sent Title of Peers Table column which indicates the total amount of network information we have sent to the peer. Received Title of Peers Table column which indicates the total amount of network information we have received from the peer. Address Title of Peers Table column which contains the IP/Onion/I2P address of the connected peer. Type Title of Peers Table column which describes the type of peer connection. The "type" describes why the connection exists. Network Title of Peers Table column which states the network the peer connected through. Network Inbound An Inbound Connection from a Peer. Outbound An Outbound Connection to a Peer. QObject Amount Amount Enter a Bitcoin address (e.g. %1) Unroutable Internal Inbound An inbound connection from a peer. An inbound connection is a connection initiated by a peer. Outbound An outbound connection to a peer. An outbound connection is a connection initiated by us. Full Relay Peer connection type that relays all network information. Block Relay Peer connection type that relays network information about blocks and not transactions or addresses. Manual Peer connection type established manually through one of several methods. Feeler Short-lived peer connection type that tests the aliveness of known addresses. Address Fetch Short-lived peer connection type that solicits known addresses from a peer. %1 d %1 h %1 m %1 s None N/A N/A %1 ms %n second(s) %n second %n seconds %n minute(s) %n minute %n minutes %n hour(s) %n hour %n hours %n day(s) %n day %n days %n week(s) %n week %n weeks %1 and %2 %n year(s) %n year %n years %1 B %1 kB %1 MB %1 GB Do you want to reset settings to default values, or to abort without making changes? Explanatory text shown on startup when the settings file cannot be read. Prompts user to make a choice between resetting or aborting. A fatal error occurred. Check that settings file is writable, or try running with -nosettings. Explanatory text shown on startup when the settings file could not be written. Prompts user to check that we have the ability to write to the file. Explains that the user has the option of running without a settings file. Error: Specified data directory "%1" does not exist. Error: Cannot parse configuration file: %1. Error: %1 %1 didn't yet exit safely… unknown QRImageWidget &Save Image… &Copy Image Resulting URI too long, try to reduce the text for label / message. Error encoding URI into QR Code. QR code support not available. Save QR Code PNG Image Expanded name of the PNG file format. See: https://en.wikipedia.org/wiki/Portable_Network_Graphics. RPCConsole N/A N/A Client version Client version &Information &Information General Datadir To specify a non-default location of the data directory use the '%1' option. Blocksdir To specify a non-default location of the blocks directory use the '%1' option. Startup time Startup time Network Network Name Number of connections Number of connections Block chain Block chain Memory Pool Current number of transactions Memory usage Wallet: (none) &Reset Received Sent &Peers Banned peers Select a peer to view detailed information. Version Starting Block Synced Headers Synced Blocks Last Transaction The mapped Autonomous System used for diversifying peer selection. Mapped AS Whether we relay addresses to this peer. Tooltip text for the Address Relay field in the peer details area. Address Relay Total number of addresses processed, excluding those dropped due to rate-limiting. Tooltip text for the Addresses Processed field in the peer details area. Addresses Processed Total number of addresses dropped due to rate-limiting. Tooltip text for the Addresses Rate-Limited field in the peer details area. Addresses Rate-Limited User Agent Node window Current block height Open the %1 debug log file from the current data directory. This can take a few seconds for large log files. Decrease font size Increase font size Permissions The direction and type of peer connection: %1 Direction/Type The network protocol this peer is connected through: IPv4, IPv6, Onion, I2P, or CJDNS. Services Whether the peer requested us to relay transactions. Wants Tx Relay High bandwidth BIP152 compact block relay: %1 High Bandwidth Connection Time Elapsed time since a novel block passing initial validity checks was received from this peer. Last Block Elapsed time since a novel transaction accepted into our mempool was received from this peer. Tooltip text for the Last Transaction field in the peer details area. Last Send Last Receive Ping Time The duration of a currently outstanding ping. Ping Wait Min Ping Time Offset Last block time Last block time &Open &Open &Console &Console &Network Traffic Totals In: Out: Debug log file Debug log file Clear console Clear console Yes No To From Ban for Never Inbound: initiated by peer Explanatory text for an inbound peer connection. Outbound Full Relay: default Explanatory text for an outbound peer connection that relays all network information. This is the default behavior for outbound connections. Outbound Block Relay: does not relay transactions or addresses Explanatory text for an outbound peer connection that relays network information about blocks and not transactions or addresses. Outbound Manual: added using RPC %1 or %2/%3 configuration options Explanatory text for an outbound peer connection that was established manually through one of several methods. The numbered arguments are stand-ins for the methods available to establish manual connections. Outbound Feeler: short-lived, for testing addresses Explanatory text for a short-lived outbound peer connection that is used to test the aliveness of known addresses. Outbound Address Fetch: short-lived, for soliciting addresses Explanatory text for a short-lived outbound peer connection that is used to request addresses from a peer. we selected the peer for high bandwidth relay the peer selected us for high bandwidth relay no high bandwidth relay selected Ctrl++ Main shortcut to increase the RPC console font size. Ctrl+= Secondary shortcut to increase the RPC console font size. Ctrl+- Main shortcut to decrease the RPC console font size. Ctrl+_ Secondary shortcut to decrease the RPC console font size. &Copy address Context menu action to copy the address of a peer. &Disconnect 1 &hour 1 d&ay 1 &week 1 &year &Copy IP/Netmask Context menu action to copy the IP/Netmask of a banned peer. IP/Netmask is the combination of a peer's IP address and its Netmask. For IP address, see: https://en.wikipedia.org/wiki/IP_address. &Unban Network activity disabled Executing command without any wallet Executing command using "%1" wallet Welcome to the %1 RPC console. Use up and down arrows to navigate history, and %2 to clear screen. Use %3 and %4 to increase or decrease the font size. Type %5 for an overview of available commands. For more information on using this console, type %6. %7WARNING: Scammers have been active, telling users to type commands here, stealing their wallet contents. Do not use this console without fully understanding the ramifications of a command.%8 RPC console welcome message. Placeholders %7 and %8 are style tags for the warning content, and they are not space separated from the rest of the text intentionally. Executing… A console message indicating an entered command is currently being executed. (peer: %1) via %1 Unknown ReceiveCoinsDialog &Amount: &Label: &Label: &Message: An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network. An optional label to associate with the new receiving address. Use this form to request payments. All fields are optional. An optional amount to request. Leave this empty or zero to not request a specific amount. An optional label to associate with the new receiving address (used by you to identify an invoice). It is also attached to the payment request. An optional message that is attached to the payment request and may be displayed to the sender. &Create new receiving address Clear all fields of the form. Clear Requested payments history Show the selected request (does the same as double clicking an entry) Show Remove the selected entries from the list Remove Copy &URI &Copy address Copy &label Copy &message Copy &amount Could not unlock wallet. Could not generate new %1 address ReceiveRequestDialog Request payment to … Address: Amount: Label: Message: Wallet: Copy &URI Copy &Address &Verify Verify this address on e.g. a hardware wallet screen &Save Image… Request payment to %1 Payment information RecentRequestsTableModel Date Date Label Message (no label) (no message) (no amount requested) Requested SendCoinsDialog Send Coins Send Coins Coin Control Features automatically selected Insufficient funds! Quantity: Bytes: Amount: Fee: After Fee: Change: If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address. Custom change address Transaction Fee: Using the fallbackfee can result in sending a transaction that will take several hours or days (or never) to confirm. Consider choosing your fee manually or wait until you have validated the complete chain. Warning: Fee estimation is currently not possible. per kilobyte Hide Recommended: Custom: Send to multiple recipients at once Send to multiple recipients at once Add &Recipient Add &Recipient Clear all fields of the form. Inputs… Dust: Choose… Hide transaction fee settings Specify a custom fee per kB (1,000 bytes) of the transaction's virtual size. Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 satoshis per kvB" for a transaction size of 500 virtual bytes (half of 1 kvB) would ultimately yield a fee of only 50 satoshis. When there is less transaction volume than space in the blocks, miners as well as relaying nodes may enforce a minimum fee. Paying only this minimum fee is just fine, but be aware that this can result in a never confirming transaction once there is more demand for bitcoin transactions than the network can process. A too low fee might result in a never confirming transaction (read the tooltip) (Smart fee not initialized yet. This usually takes a few blocks…) Confirmation time target: Enable Replace-By-Fee With Replace-By-Fee (BIP-125) you can increase a transaction's fee after it is sent. Without this, a higher fee may be recommended to compensate for increased transaction delay risk. Clear &All Clear &All Balance: Balance: Confirm the send action Confirm the send action S&end S&end Copy quantity Copy amount Copy fee Copy after fee Copy bytes Copy dust Copy change %1 (%2 blocks) Sign on device "device" usually means a hardware wallet. Connect your hardware wallet first. Set external signer script path in Options -> Wallet "External signer" means using devices such as hardware wallets. Cr&eate Unsigned Creates a Partially Signed Bitcoin Transaction (PSBT) for use with e.g. an offline %1 wallet, or a PSBT-compatible hardware wallet. from wallet '%1' %1 to '%2' %1 to %2 To review recipient list click "Show Details…" Sign failed External signer not found "External signer" means using devices such as hardware wallets. External signer failure "External signer" means using devices such as hardware wallets. Save Transaction Data Partially Signed Transaction (Binary) Expanded name of the binary PSBT file format. See: BIP 174. PSBT saved External balance: or You can increase the fee later (signals Replace-By-Fee, BIP-125). Please, review your transaction proposal. This will produce a Partially Signed Bitcoin Transaction (PSBT) which you can save or copy and then sign with e.g. an offline %1 wallet, or a PSBT-compatible hardware wallet. Text to inform a user attempting to create a transaction of their current options. At this stage, a user can only create a PSBT. This string is displayed when private keys are disabled and an external signer is not available. Do you want to create this transaction? Message displayed when attempting to create a transaction. Cautionary text to prompt the user to verify that the displayed transaction details represent the transaction the user intends to create. Please, review your transaction. You can create and send this transaction or create a Partially Signed Bitcoin Transaction (PSBT), which you can save or copy and then sign with, e.g., an offline %1 wallet, or a PSBT-compatible hardware wallet. Text to inform a user attempting to create a transaction of their current options. At this stage, a user can send their transaction or create a PSBT. This string is displayed when both private keys and PSBT controls are enabled. Please, review your transaction. Text to prompt a user to review the details of the transaction they are attempting to send. Transaction fee Not signalling Replace-By-Fee, BIP-125. Total Amount Confirm send coins Watch-only balance: The recipient address is not valid. Please recheck. The amount to pay must be larger than 0. The amount exceeds your balance. The total exceeds your balance when the %1 transaction fee is included. Duplicate address found: addresses should only be used once each. Transaction creation failed! A fee higher than %1 is considered an absurdly high fee. Payment request expired. Estimated to begin confirmation within %n block(s). Estimated to begin confirmation within %n block. Estimated to begin confirmation within %n blocks. Warning: Invalid Bitcoin address Warning: Unknown change address Confirm custom change address The address you selected for change is not part of this wallet. Any or all funds in your wallet may be sent to this address. Are you sure? (no label) SendCoinsEntry A&mount: A&mount: Pay &To: Pay &To: &Label: &Label: Choose previously used address The Bitcoin address to send the payment to Alt+A Alt+A Paste address from clipboard Paste address from clipboard Alt+P Alt+P Remove this entry The amount to send in the selected unit The fee will be deducted from the amount being sent. The recipient will receive less bitcoins than you enter in the amount field. If multiple recipients are selected, the fee is split equally. S&ubtract fee from amount Use available balance Message: This is an unauthenticated payment request. This is an authenticated payment request. Enter a label for this address to add it to the list of used addresses A message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network. Pay To: Memo: SendConfirmationDialog Send Create Unsigned ShutdownWindow %1 is shutting down… Do not shut down the computer until this window disappears. SignVerifyMessageDialog Signatures - Sign / Verify a Message Signatures - Sign / Verify a Message &Sign Message &Sign Message You can sign messages/agreements with your addresses to prove you can receive bitcoins sent to them. Be careful not to sign anything vague or random, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. The Bitcoin address to sign the message with Choose previously used address Alt+A Alt+A Paste address from clipboard Paste address from clipboard Alt+P Alt+P Enter the message you want to sign here Enter the message you want to sign here Signature Signature Copy the current signature to the system clipboard Copy the current signature to the system clipboard Sign the message to prove you own this Bitcoin address Sign the message to prove you own this Bitcoin address Sign &Message Sign &Message Reset all sign message fields Reset all sign message fields Clear &All Clear &All &Verify Message &Verify Message Enter the receiver's address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Note that this only proves the signing party receives with the address, it cannot prove sendership of any transaction! The Bitcoin address the message was signed with The signed message to verify The signature given when the message was signed Verify the message to ensure it was signed with the specified Bitcoin address Verify the message to ensure it was signed with the specified Bitcoin address Verify &Message Verify &Message Reset all verify message fields Reset all verify message fields Click "Sign Message" to generate signature The entered address is invalid. Please check the address and try again. The entered address does not refer to a key. Wallet unlock was cancelled. No error Private key for the entered address is not available. Message signing failed. Message signed. The signature could not be decoded. Please check the signature and try again. The signature did not match the message digest. Message verification failed. Message verified. SplashScreen (press q to shutdown and continue later) press q to shutdown TrafficGraphWidget kB/s TransactionDesc conflicted with a transaction with %1 confirmations 0/unconfirmed, %1 in memory pool not in memory pool abandoned %1/unconfirmed %1 confirmations Status Date Date Source Generated From unknown To own address watch-only label Credit matures in %n more block(s) matures in %n more block matures in %n more blocks not accepted Debit Total debit Total credit Transaction fee Net amount Message Comment Transaction ID Transaction total size Transaction virtual size Output index (Certificate was not verified) Merchant Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours. Debug information Transaction Inputs Amount Amount true false TransactionDescDialog This pane shows a detailed description of the transaction This pane shows a detailed description of the transaction Details for %1 TransactionTableModel Date Date Type Label Unconfirmed Abandoned Confirming (%1 of %2 recommended confirmations) Confirmed (%1 confirmations) Conflicted Immature (%1 confirmations, will be available after %2) Generated but not accepted Received with Received from Sent to Payment to yourself Mined watch-only (n/a) (no label) Transaction status. Hover over this field to show number of confirmations. Date and time that the transaction was received. Type of transaction. Whether or not a watch-only address is involved in this transaction. User-defined intent/purpose of the transaction. Amount removed from or added to balance. TransactionView All Today This week This month Last month This year Received with Sent to To yourself Mined Other Enter address, transaction id, or label to search Min amount Range… &Copy address Copy &label Copy &amount Copy transaction &ID Copy &raw transaction Copy full transaction &details &Show transaction details Increase transaction &fee A&bandon transaction &Edit address label Show in %1 Transactions table context menu action to show the selected transaction in a third-party block explorer. %1 is a stand-in argument for the URL of the explorer. Export Transaction History Comma separated file Expanded name of the CSV file format. See: https://en.wikipedia.org/wiki/Comma-separated_values. Confirmed Confirmed Watch-only Date Date Type Label Address ID Exporting Failed There was an error trying to save the transaction history to %1. Exporting Successful The transaction history was successfully saved to %1. Range: to UnitDisplayStatusBarControl Unit to show amounts in. Click to select another unit. WalletController Close wallet Are you sure you wish to close the wallet %1? Closing the wallet for too long can result in having to resync the entire chain if pruning is enabled. Close all wallets Are you sure you wish to close all wallets? WalletFrame No wallet has been loaded. Go to File > Open Wallet to load a wallet. - OR - Create a new wallet Error Error Unable to decode PSBT from clipboard (invalid base64) Load Transaction Data Partially Signed Transaction (*.psbt) PSBT file must be smaller than 100 MiB Unable to decode PSBT WalletModel Send Coins Send Coins Fee bump error Increasing transaction fee failed Do you want to increase the fee? Asks a user if they would like to manually increase the fee of a transaction that has already been created. Current fee: Increase: New fee: Warning: This may pay the additional fee by reducing change outputs or adding inputs, when necessary. It may add a new change output if one does not already exist. These changes may potentially leak privacy. Confirm fee bump Can't draft transaction. PSBT copied Can't sign transaction. Could not commit transaction Can't display address default wallet WalletView &Export &Export Export the data in the current tab to a file Export the data in the current tab to a file Backup Wallet Wallet Data Name of the wallet data file format. Backup Failed There was an error trying to save the wallet data to %1. Backup Successful The wallet data was successfully saved to %1. Cancel bitcoin-core The %s developers %s corrupt. Try using the wallet tool bitcoin-wallet to salvage or restoring a backup. -maxtxfee is set very high! Fees this large could be paid on a single transaction. Cannot downgrade wallet from version %i to version %i. Wallet version unchanged. Cannot obtain a lock on data directory %s. %s is probably already running. Cannot upgrade a non HD split wallet from version %i to version %i without upgrading to support pre-split keypool. Please use version %i or no version specified. Distributed under the MIT software license, see the accompanying file %s or %s Error reading %s! All keys read correctly, but transaction data or address book entries might be missing or incorrect. Error reading %s! Transaction data may be missing or incorrect. Rescanning wallet. Error: Dumpfile format record is incorrect. Got "%s", expected "format". Error: Dumpfile identifier record is incorrect. Got "%s", expected "%s". Error: Dumpfile version is not supported. This version of bitcoin-wallet only supports version 1 dumpfiles. Got dumpfile with version %s Error: Legacy wallets only support the "legacy", "p2sh-segwit", and "bech32" address types Error: Listening for incoming connections failed (listen returned error %s) Fee estimation failed. Fallbackfee is disabled. Wait a few blocks or enable -fallbackfee. File %s already exists. If you are sure this is what you want, move it out of the way first. Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions) Invalid or corrupt peers.dat (%s). If you believe this is a bug, please report it to %s. As a workaround, you can move the file (%s) out of the way (rename, move, or delete) to have a new one created on the next start. More than one onion bind address is provided. Using %s for the automatically created Tor onion service. No dump file provided. To use createfromdump, -dumpfile=<filename> must be provided. No dump file provided. To use dump, -dumpfile=<filename> must be provided. No wallet file format provided. To use createfromdump, -format=<format> must be provided. Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly. Please contribute if you find %s useful. Visit %s for further information about the software. Prune configured below the minimum of %d MiB. Please use a higher number. Prune: last wallet synchronisation goes beyond pruned data. You need to -reindex (download the whole blockchain again in case of pruned node) SQLiteDatabase: Unknown sqlite wallet schema version %d. Only version %d is supported The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correct The block index db contains a legacy 'txindex'. To clear the occupied disk space, run a full -reindex, otherwise ignore this error. This error message will not be displayed again. The transaction amount is too small to send after the fee has been deducted This error could occur if this wallet was not shutdown cleanly and was last loaded using a build with a newer version of Berkeley DB. If so, please use the software that last loaded this wallet This is a pre-release test build - use at your own risk - do not use for mining or merchant applications This is the maximum transaction fee you pay (in addition to the normal fee) to prioritize partial spend avoidance over regular coin selection. This is the transaction fee you may discard if change is smaller than dust at this level This is the transaction fee you may pay when fee estimates are not available. Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments. Unable to replay blocks. You will need to rebuild the database using -reindex-chainstate. Unknown wallet file format "%s" provided. Please provide one of "bdb" or "sqlite". Warning: Dumpfile wallet format "%s" does not match command line specified format "%s". Warning: Private keys detected in wallet {%s} with disabled private keys Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade. Witness data for blocks after height %d requires validation. Please restart with -reindex. You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain %s is set very high! -maxmempool must be at least %d MB A fatal internal error occurred, see debug.log for details Cannot resolve -%s address: '%s' Cannot set -forcednsseed to true when setting -dnsseed to false. Cannot set -peerblockfilters without -blockfilterindex. Cannot write to data directory '%s'; check permissions. The -txindex upgrade started by a previous version cannot be completed. Restart with the previous version or run a full -reindex. Cannot provide specific connections and have addrman find outgoing connections at the same time. Error loading %s: External signer wallet being loaded without external signer support compiled Config setting for %s only applied on %s network when in [%s] section. Copyright (C) %i-%i Corrupted block database detected Could not find asmap file %s Could not parse asmap file %s Disk space is too low! Do you want to rebuild the block database now? Done loading Dump file %s does not exist. Error creating %s Error initializing block database Error initializing wallet database environment %s! Error loading %s Error loading %s: Private keys can only be disabled during creation Error loading %s: Wallet corrupted Error loading %s: Wallet requires newer version of %s Error loading block database Error opening block database Error reading from database, shutting down. Error reading next record from wallet database Error upgrading chainstate database Error: Couldn't create cursor into database Error: Disk space is low for %s Error: Dumpfile checksum does not match. Computed %s, expected %s Error: Got key that was not hex: %s Error: Got value that was not hex: %s Error: Keypool ran out, please call keypoolrefill first Error: Missing checksum Error: No %s addresses available. Error: Unable to parse version %u as a uint32_t Error: Unable to write record to new wallet Failed to listen on any port. Use -listen=0 if you want this. Failed to rescan the wallet during initialization Failed to verify database Fee rate (%s) is lower than the minimum fee rate setting (%s) Ignoring duplicate -wallet %s. Importing… Incorrect or no genesis block found. Wrong datadir for network? Initialization sanity check failed. %s is shutting down. Input not found or already spent Insufficient funds Invalid -i2psam address or hostname: '%s' Invalid -onion address or hostname: '%s' Invalid -proxy address or hostname: '%s' Invalid P2P permission: '%s' Invalid amount for -%s=<amount>: '%s' Invalid amount for -discardfee=<amount>: '%s' Invalid amount for -fallbackfee=<amount>: '%s' Invalid amount for -paytxfee=<amount>: '%s' (must be at least %s) Invalid netmask specified in -whitelist: '%s' Loading P2P addresses… Loading banlist… Loading block index… Loading wallet… Missing amount Missing solving data for estimating transaction size Need to specify a port with -whitebind: '%s' No addresses available No proxy server specified. Use -proxy=<ip> or -proxy=<ip:port>. Not enough file descriptors available. Prune cannot be configured with a negative value. Prune mode is incompatible with -coinstatsindex. Prune mode is incompatible with -txindex. Pruning blockstore… Reducing -maxconnections from %d to %d, because of system limitations. Replaying blocks… Rescanning… SQLiteDatabase: Failed to execute statement to verify database: %s SQLiteDatabase: Failed to prepare statement to verify database: %s SQLiteDatabase: Failed to read database verification error: %s SQLiteDatabase: Unexpected application id. Expected %u, got %u Section [%s] is not recognized. Signing transaction failed Specified -walletdir "%s" does not exist Specified -walletdir "%s" is a relative path Specified -walletdir "%s" is not a directory Specified blocks directory "%s" does not exist. Starting network threads… The source code is available from %s. The specified config file %s does not exist The transaction amount is too small to pay the fee The wallet will avoid paying less than the minimum relay fee. This is experimental software. This is the minimum transaction fee you pay on every transaction. This is the transaction fee you will pay if you send a transaction. Transaction amount too small Transaction amounts must not be negative Transaction change output index out of range Transaction has too long of a mempool chain Transaction must have at least one recipient Transaction needs a change address, but we can't generate it. Transaction too large Unable to bind to %s on this computer (bind returned error %s) Unable to bind to %s on this computer. %s is probably already running. Unable to create the PID file '%s': %s Unable to generate initial keys Unable to generate keys Unable to open %s for writing Unable to parse -maxuploadtarget: '%s' Unable to start HTTP server. See debug log for details. Unknown -blockfilterindex value %s. Unknown address type '%s' Unknown change type '%s' Unknown network specified in -onlynet: '%s' Unknown new rules activated (versionbit %i) Unsupported logging category %s=%s. Upgrading UTXO database User Agent comment (%s) contains unsafe characters. Verifying blocks… Verifying wallet(s)… Wallet needed to be rewritten: restart %s to complete Settings file could not be read Settings file could not be written