UTF-8
AboutDialog
About Bitcoin
<b>Bitcoin</b> version
Copyright © 2009-2012 Bitcoin Developers
This is experimental software.
Distributed under the MIT/X11 software license, see the accompanying file license.txt or http://www.opensource.org/licenses/mit-license.php.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) and cryptographic software written by Eric Young (eay@cryptsoft.com) and UPnP software written by Thomas Bernard.
AddressBookPage
Address Book
These are your Bitcoin addresses for receiving payments. You may want to give a different one to each sender so you can keep track of who is paying you.
Double-click to edit address or label
Create a new address
&New Address...
Copy the currently selected address to the system clipboard
&Copy to Clipboard
Delete the currently selected address from the list. Only sending addresses can be deleted.
&Delete
Export Address Book Data
Comma separated file (*.csv)
Error exporting
Could not write to file %1.
AddressTableModel
Label
Address
(no label)
AskPassphraseDialog
Dialog
Enter passphrase
New passphrase
Repeat new passphrase
TextLabel
Enter the new passphrase to the wallet.<br/>Please use a passphrase of <b>10 or more random characters</b>, or <b>eight or more words</b>.
Encrypt wallet
This operation needs your wallet passphrase to unlock the wallet.
Unlock wallet
This operation needs your wallet passphrase to decrypt the wallet.
Decrypt wallet
Change passphrase
Enter the old and new passphrase to the wallet.
Confirm wallet encryption
WARNING: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR BITCOINS</b>!
Are you sure you wish to encrypt your wallet?
Wallet encrypted
Bitcoin will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer.
Wallet encryption failed
Wallet encryption failed due to an internal error. Your wallet was not encrypted.
The supplied passphrases do not match.
Wallet unlock failed
The passphrase entered for the wallet decryption was incorrect.
Wallet decryption failed
Wallet passphrase was successfully changed.
Warning: The Caps Lock key is on.
BitcoinGUI
Bitcoin Wallet
Synchronizing with network...
Block chain synchronization in progress
&Overview
Show general overview of wallet
&Transactions
Browse transaction history
&Address Book
Edit the list of stored addresses and labels
&Receive coins
Show the list of addresses for receiving payments
&Send coins
Send coins to a bitcoin address
E&xit
Quit application
&About %1
Show information about Bitcoin
About &Qt
Show information about Qt
&Options...
Modify configuration options for bitcoin
Open &Bitcoin
Show the Bitcoin window
&Export...
Export the current view to a file
&Encrypt Wallet
Encrypt or decrypt wallet
&Change Passphrase
Change the passphrase used for wallet encryption
&File
&Settings
&Help
Tabs toolbar
Actions toolbar
[testnet]
bitcoin-qt
%n active connection(s) to Bitcoin network
%n active connection to Bitcoin network
%n active connections to Bitcoin network
Downloaded %1 of %2 blocks of transaction history.
Downloaded %1 blocks of transaction history.
%n second(s) ago
%n second ago
%n seconds ago
%n minute(s) ago
%n minute ago
%n minutes ago
%n hour(s) ago
%n hour ago
%n hours ago
%n day(s) ago
%n day ago
%n days ago
Up to date
Catching up...
Last received block was generated %1.
This transaction is over the size limit. You can still send it for a fee of %1, which goes to the nodes that process your transaction and helps to support the network. Do you want to pay the fee?
Sending...
Sent transaction
Incoming transaction
Date: %1
Amount: %2
Type: %3
Address: %4
Wallet is <b>encrypted</b> and currently <b>unlocked</b>
Wallet is <b>encrypted</b> and currently <b>locked</b>
A fatal error occurred. Bitcoin can no longer continue safely and will quit.
DisplayOptionsPage
&Unit to show amounts in:
Choose the default subdivision unit to show in the interface, and when sending coins
&Display addresses in transaction list
Whether to show Bitcoin addresses in the transaction list
EditAddressDialog
Edit Address
&Label
The label associated with this address book entry
&Address
The address associated with this address book entry. This can only be modified for sending addresses.
New receiving address
New sending address
Edit receiving address
Edit sending address
The entered address "%1" is already in the address book.
The entered address "%1" is not a valid bitcoin address.
Could not unlock wallet.
New key generation failed.
MainOptionsPage
&Start Bitcoin on window system startup
Automatically start Bitcoin after the computer is turned on
&Minimize to the tray instead of the taskbar
Show only a tray icon after minimizing the window
Map port using &UPnP
Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled.
M&inimize on close
Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Quit in the menu.
&Connect through SOCKS4 proxy:
Connect to the Bitcoin network through a SOCKS4 proxy (e.g. when connecting through Tor)
Proxy &IP:
IP address of the proxy (e.g. 127.0.0.1)
&Port:
Port of the proxy (e.g. 1234)
Optional transaction fee per kB that helps make sure your transactions are processed quickly. Most transactions are 1 kB. Fee 0.01 recommended.
Pay transaction &fee
OptionsDialog
Main
Display
Options
OverviewPage
Form
Balance:
Number of transactions:
0
Unconfirmed:
Wallet
<b>Recent transactions</b>
Your current balance
Total of transactions that have yet to be confirmed, and do not yet count toward the current balance
Total number of transactions in wallet
SendCoinsDialog
Send Coins
Send to multiple recipients at once
&Add recipient...
Remove all transaction fields
Clear all
Balance:
123.456 BTC
Confirm the send action
&Send
<b>%1</b> to %2 (%3)
Confirm send coins
Are you sure you want to send %1?
and
The recipient address is not valid, please recheck.
The amount to pay must be larger than 0.
The amount exceeds your balance.
The total exceeds your balance when the %1 transaction fee is included.
Duplicate address found, can only send to each address once per send operation.
Error: Transaction creation failed.
Error: The transaction was rejected. This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.
SendCoinsEntry
Form
A&mount:
Pay &To:
Enter a label for this address to add it to your address book
&Label:
The address to send the payment to (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)
Choose address from address book
Alt+A
Paste address from clipboard
Alt+P
Remove this recipient
Enter a Bitcoin address (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)
TransactionDesc
Open for %1 blocks
Open until %1
%1/offline?
%1/unconfirmed
%1 confirmations
<b>Status:</b>
, has not been successfully broadcast yet
, broadcast through %1 node
, broadcast through %1 nodes
<b>Date:</b>
<b>Source:</b> Generated<br>
<b>From:</b>
unknown
<b>To:</b>
(yours, label:
(yours)
<b>Credit:</b>
(%1 matures in %2 more blocks)
(not accepted)
<b>Debit:</b>
<b>Transaction fee:</b>
<b>Net amount:</b>
Message:
Comment:
Generated coins must wait 120 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, it will change to "not accepted" and not be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.
TransactionDescDialog
Transaction details
This pane shows a detailed description of the transaction
TransactionTableModel
Date
Type
Address
Amount
Open for %n block(s)
Open for %n block
Open for %n blocks
Open until %1
Offline (%1 confirmations)
Unconfirmed (%1 of %2 confirmations)
Confirmed (%1 confirmations)
Mined balance will be available in %n more blocks
Mined balance will be available in %n more block
Mined balance will be available in %n more blocks
This block was not received by any other nodes and will probably not be accepted!
Generated but not accepted
Received with
Received from
Sent to
Payment to yourself
Mined
(n/a)
Transaction status. Hover over this field to show number of confirmations.
Date and time that the transaction was received.
Type of transaction.
Destination address of transaction.
Amount removed from or added to balance.
TransactionView
All
Today
This week
This month
Last month
This year
Range...
Received with
Sent to
To yourself
Mined
Other
Enter address or label to search
Min amount
Copy address
Copy label
Edit label
Show details...
Export Transaction Data
Comma separated file (*.csv)
Confirmed
Date
Type
Label
Address
Amount
ID
Error exporting
Could not write to file %1.
Range:
to
WalletModel
Sending...
bitcoin-core
Bitcoin version
Usage:
Send command to -server or bitcoind
List commands
Get help for a command
Options:
Specify configuration file (default: bitcoin.conf)
Specify pid file (default: bitcoind.pid)
Generate coins
Don't generate coins
Start minimized
Specify data directory
Specify connection timeout (in milliseconds)
Connect through socks4 proxy
Allow DNS lookups for addnode and connect
Listen for connections on <port> (default: 8333 or testnet: 18333)
Maintain at most <n> connections to peers (default: 125)
Add a node to connect to
Connect only to the specified node
Don't find peers using internet relay chat
Don't accept connections from outside
Don't bootstrap list of peers using DNS
Threshold for disconnecting misbehaving peers (default: 100)
Number of seconds to keep misbehaving peers from reconnecting (default: 86400)
Maximum per-connection receive buffer, <n>*1000 bytes (default: 10000)
Maximum per-connection send buffer, <n>*1000 bytes (default: 10000)
Don't attempt to use UPnP to map the listening port
Attempt to use UPnP to map the listening port
Fee per kB to add to transactions you send
Accept command line and JSON-RPC commands
Run in the background as a daemon and accept commands
Use the test network
Output extra debugging information
Prepend debug output with timestamp
Send trace/debug info to console instead of debug.log file
Send trace/debug info to debugger
Username for JSON-RPC connections
Password for JSON-RPC connections
Listen for JSON-RPC connections on <port> (default: 8332)
Allow JSON-RPC connections from specified IP address
Send commands to node running on <ip> (default: 127.0.0.1)
Set key pool size to <n> (default: 100)
Rescan the block chain for missing wallet transactions
SSL options: (see the Bitcoin Wiki for SSL setup instructions)
Use OpenSSL (https) for JSON-RPC connections
Server certificate file (default: server.cert)
Server private key (default: server.pem)
Acceptable ciphers (default: TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH)
This help message
Cannot obtain a lock on data directory %s. Bitcoin is probably already running.
Loading addresses...
Error loading addr.dat
Loading block index...
Error loading blkindex.dat
Loading wallet...
Error loading wallet.dat: Wallet corrupted
Error loading wallet.dat: Wallet requires newer version of Bitcoin
Wallet needed to be rewritten: restart Bitcoin to complete
Error loading wallet.dat
Rescanning...
Done loading
Invalid -proxy address
Invalid amount for -paytxfee=<amount>
Warning: -paytxfee is set very high. This is the transaction fee you will pay if you send a transaction.
Error: CreateThread(StartNode) failed
Warning: Disk space is low
Unable to bind to port %d on this computer. Bitcoin is probably already running.
Warning: Please check that your computer's date and time are correct. If your clock is wrong Bitcoin will not work properly.
beta
main
Bitcoin-Qt