AddressBookPageRight-click to edit address or labelCreate a new addressCreate a new address&NewCopy the currently selected address to the system clipboardCopy the currently selected address to the system clipboard&CopyC&loseDelete the currently selected address from the listDelete the currently selected address from the listExport the data in the current tab to a fileExport the data in the current tab to a file&Export&Export&Delete&DeleteAskPassphraseDialogPassphrase DialogPassphrase DialogEnter passphraseEnter passphraseNew passphraseNew passphraseRepeat new passphraseRepeat new passphraseBanTableModelIP/NetmaskBanned UntilBitcoinGUISign &message...Sign &message...Synchronizing with network...Synchronizing with network...&Overview&OverviewNodeShow general overview of walletShow general overview of wallet&Transactions&TransactionsBrowse transaction historyBrowse transaction historyE&xitE&xitQuit applicationQuit application&About %1Show information about %1About &QtAbout &QtShow information about QtShow information about Qt&Options...&Options...Modify configuration options for %1&Encrypt Wallet...&Encrypt Wallet...&Backup Wallet...&Backup Wallet...&Change Passphrase...&Change Passphrase...&Sending addresses...&Receiving addresses...Open &URI...Reindexing blocks on disk...Reindexing blocks on disk...Send coins to a Bitcoin addressSend coins to a Bitcoin addressBackup wallet to another locationBackup wallet to another locationChange the passphrase used for wallet encryptionChange the passphrase used for wallet encryption&Debug window&Debug windowOpen debugging and diagnostic consoleOpen debugging and diagnostic console&Verify message...&Verify message...BitcoinBitcoinWalletWallet&Send&Send&Receive&Receive&Show / Hide&Show / HideShow or hide the main WindowShow or hide the main WindowEncrypt the private keys that belong to your walletEncrypt the private keys that belong to your walletSign messages with your Bitcoin addresses to prove you own themSign messages with your Bitcoin addresses to prove you own themVerify messages to ensure they were signed with specified Bitcoin addressesVerify messages to ensure they were signed with specified Bitcoin addresses&File&File&Settings&Settings&Help&HelpTabs toolbarTabs toolbarRequest payments (generates QR codes and bitcoin: URIs)Show the list of used sending addresses and labelsShow the list of used receiving addresses and labelsOpen a bitcoin: URI or payment request&Command-line options%n active connection(s) to Bitcoin network%n active connection to Bitcoin network%n active connections to Bitcoin networkIndexing blocks on disk...Processing blocks on disk...No block source available...No block source available...Processed %n block(s) of transaction history.Processed %n block of transaction history.Processed %n blocks of transaction history.%n hour(s)%n hour%n hours%n day(s)%n day%n days%n week(s)%n week%n weeks%1 and %2%n year(s)%n year%n years%1 behind%1 behindLast received block was generated %1 ago.Last received block was generated %1 ago.Transactions after this will not yet be visible.Transactions after this will not yet be visible.ErrorErrorWarningWarningInformationInformationUp to dateUp to dateShow the %1 help message to get a list with possible Bitcoin command-line options%1 clientCatching up...Catching up...Date: %1
Amount: %1
Type: %1
Label: %1
Address: %1
Sent transactionSent transactionIncoming transactionIncoming transactionWallet is <b>encrypted</b> and currently <b>unlocked</b>Wallet is <b>encrypted</b> and currently <b>unlocked</b>Wallet is <b>encrypted</b> and currently <b>locked</b>Wallet is <b>encrypted</b> and currently <b>locked</b>CoinControlDialogCoin SelectionQuantity:Bytes:Amount:Priority:Fee:Dust:After Fee:Change:(un)select allTree modeList modeAmountAmountReceived with labelReceived with addressDateDateConfirmationsConfirmedConfirmedPriorityEditAddressDialogEdit AddressEdit Address&Label&LabelThe label associated with this address list entryThe address associated with this address list entry. This can only be modified for sending addresses.&Address&AddressFreespaceCheckerA new data directory will be created.A new data directory will be created.namenameDirectory already exists. Add %1 if you intend to create a new directory here.Directory already exists. Add %1 if you intend to create a new directory here.Path already exists, and is not a directory.Path already exists, and is not a directory.Cannot create data directory here.Cannot create data directory here.HelpMessageDialogversionversion(%1-bit)About %1Command-line optionsUsage:Usage:command-line optionscommand-line optionsUI Options:Choose data directory on startup (default: %u)Set language, for example "de_DE" (default: system locale)Start minimizedSet SSL root certificates for payment request (default: -system-)Show splash screen on startup (default: %u)Reset all settings changed in the GUIIntroWelcomeWelcomeWelcome to %1.As this is the first time the program is launched, you can choose where %1 will store its data.%1 will download and store a copy of the Bitcoin block chain. At least %2GB of data will be stored in this directory, and it will grow over time. The wallet will also be stored in this directory.Use the default data directoryUse the default data directoryUse a custom data directory:Use a custom data directory:Error: Specified data directory "%1" cannot be created.ErrorError%n GB of free space available(of %n GB needed)OpenURIDialogOpen URIOpen payment request from URI or fileURI:Select payment request fileOptionsDialogOptionsOptions&Main&MainAutomatically start %1 after logging in to the system.&Start %1 on system loginSize of &database cacheMBNumber of script &verification threadsAccept connections from outsideAllow incoming connectionsIP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1)Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Exit in the menu.Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |.Third party transaction URLsActive command-line options that override above options:Reset all client options to default.Reset all client options to default.&Reset Options&Reset Options&Network&Network(0 = auto, <0 = leave that many cores free)W&alletExpertEnable coin &control featuresIf you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed.&Spend unconfirmed changeAutomatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled.Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled.Map port using &UPnPMap port using &UPnPConnect to the Bitcoin network through a SOCKS5 proxy.&Connect through SOCKS5 proxy (default proxy):Proxy &IP:Proxy &IP:&Port:&Port:Port of the proxy (e.g. 9050)Port of the proxy (e.g. 9050)Used for reaching peers via:Shows, if the supplied default SOCKS5 proxy is used to reach peers via this network type.IPv4IPv6TorConnect to the Bitcoin network through a separate SOCKS5 proxy for Tor hidden services.Use separate SOCKS5 proxy to reach peers via Tor hidden services:&Window&Window&Hide the icon from the system tray.Hide tray iconShow only a tray icon after minimizing the window.Show only a tray icon after minimizing the window.&Minimize to the tray instead of the taskbar&Minimize to the tray instead of the taskbarM&inimize on closeM&inimize on close&Display&DisplayUser Interface &language:User Interface &language:The user interface language can be set here. This setting will take effect after restarting %1.&Unit to show amounts in:&Unit to show amounts in:Choose the default subdivision unit to show in the interface and when sending coins.Choose the default subdivision unit to show in the interface and when sending coins.Whether to show coin control features or not.&OK&OK&Cancel&CanceldefaultdefaultnoneConfirm options resetConfirm options resetClient restart required to activate changes.Client will be shut down. Do you want to proceed?This change would require a client restart.The supplied proxy address is invalid.The supplied proxy address is invalid.OverviewPageFormFormThe displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet.The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet.Watch-only:Available:Your current spendable balanceYour current spendable balancePending:Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balanceTotal of transactions that have yet to be confirmed, and do not yet count toward the spendable balanceImmature:Immature:Mined balance that has not yet maturedMined balance that has not yet maturedBalancesTotal:Total:Your current total balanceYour current total balanceYour current balance in watch-only addressesSpendable:Recent transactionsUnconfirmed transactions to watch-only addressesMined balance in watch-only addresses that has not yet maturedCurrent total balance in watch-only addressesPeerTableModelUser AgentNode/ServicePing TimeQObjectAmountAmountEnter a Bitcoin address (e.g. %1)%1 d%1 h%1 m%1 sNoneN/AN/A%1 msRPCConsoleClient nameClient nameN/AN/AClient versionClient version&Information&InformationDebug windowGeneralUsing BerkeleyDB versionDatadirStartup timeStartup timeNetworkNetworkNameNumber of connectionsNumber of connectionsBlock chainBlock chainCurrent number of blocksCurrent number of blocksMemory PoolCurrent number of transactionsMemory usageReceivedSent&PeersBanned peersSelect a peer to view detailed information.WhitelistedDirectionVersionStarting BlockSynced HeadersSynced BlocksUser AgentOpen the %1 debug log file from the current data directory. This can take a few seconds for large log files.Decrease font sizeIncrease font sizeServicesBan ScoreConnection TimeLast SendLast ReceivePing TimeThe duration of a currently outstanding ping.Ping WaitTime OffsetLast block timeLast block time&Open&Open&Console&Console&Network Traffic&ClearTotalsIn:Out:Debug log fileDebug log fileClear consoleClear console&Disconnect NodeBan Node for1 &hour1 &day1 &week1 &year&Unban NodeWelcome to the %1 RPC console.Use up and down arrows to navigate history, and <b>Ctrl-L</b> to clear screen.Use up and down arrows to navigate history, and <b>Ctrl-L</b> to clear screen.Type <b>help</b> for an overview of available commands.Type <b>help</b> for an overview of available commands.%1 B%1 KB%1 MB%1 GB(node id: %1)via %1neverInboundOutboundYesNoUnknownReceiveCoinsDialog&Amount:&Label:&Label:&Message:Reuse one of the previously used receiving addresses. Reusing addresses has security and privacy issues. Do not use this unless re-generating a payment request made before.R&euse an existing receiving address (not recommended)An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network.An optional label to associate with the new receiving address.Use this form to request payments. All fields are <b>optional</b>.An optional amount to request. Leave this empty or zero to not request a specific amount.Clear all fields of the form.ClearRequested payments history&Request paymentShow the selected request (does the same as double clicking an entry)ShowRemove the selected entries from the listRemoveReceiveRequestDialogQR CodeCopy &URICopy &Address&Save Image...SendCoinsDialogSend CoinsSend CoinsCoin Control FeaturesInputs...automatically selectedInsufficient funds!Quantity:Bytes:Amount:Priority:Fee:After Fee:Change:If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address.Custom change addressTransaction Fee:Choose...collapse fee-settingsper kilobyteIf the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "total at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte.Hidetotal at leastPaying only the minimum fee is just fine as long as there is less transaction volume than space in the blocks. But be aware that this can end up in a never confirming transaction once there is more demand for bitcoin transactions than the network can process.(read the tooltip)Recommended:Custom:(Smart fee not initialized yet. This usually takes a few blocks...)Confirmation time:normalfastSend to multiple recipients at onceSend to multiple recipients at onceAdd &RecipientAdd &RecipientClear all fields of the form.Dust:Clear &AllClear &AllBalance:Balance:Confirm the send actionConfirm the send actionS&endS&endSendCoinsEntryA&mount:A&mount:Pay &To:Pay &To:&Label:&Label:Choose previously used addressThis is a normal payment.The Bitcoin address to send the payment toAlt+AAlt+APaste address from clipboardPaste address from clipboardAlt+PAlt+PRemove this entryThe fee will be deducted from the amount being sent. The recipient will receive less bitcoins than you enter in the amount field. If multiple recipients are selected, the fee is split equally.S&ubtract fee from amountMessage:This is an unauthenticated payment request.This is an authenticated payment request.Enter a label for this address to add it to the list of used addressesA message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network.Pay To:Memo:ShutdownWindow%1 is shutting down...Do not shut down the computer until this window disappears.SignVerifyMessageDialogSignatures - Sign / Verify a MessageSignatures - Sign / Verify a Message&Sign Message&Sign MessageYou can sign messages/agreements with your addresses to prove you can receive bitcoins sent to them. Be careful not to sign anything vague or random, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to.The Bitcoin address to sign the message withChoose previously used addressAlt+AAlt+APaste address from clipboardPaste address from clipboardAlt+PAlt+PEnter the message you want to sign hereEnter the message you want to sign hereSignatureSignatureCopy the current signature to the system clipboardCopy the current signature to the system clipboardSign the message to prove you own this Bitcoin addressSign the message to prove you own this Bitcoin addressSign &MessageSign &MessageReset all sign message fieldsReset all sign message fieldsClear &AllClear &All&Verify Message&Verify MessageEnter the receiver's address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Note that this only proves the signing party receives with the address, it cannot prove sendership of any transaction!The Bitcoin address the message was signed withVerify the message to ensure it was signed with the specified Bitcoin addressVerify the message to ensure it was signed with the specified Bitcoin addressVerify &MessageVerify &MessageReset all verify message fieldsReset all verify message fieldsSplashScreen[testnet][testnet]TrafficGraphWidgetKB/sTransactionDescDialogThis pane shows a detailed description of the transactionThis pane shows a detailed description of the transactionUnitDisplayStatusBarControlUnit to show amounts in. Click to select another unit.bitcoin-coreOptions:Options:Specify data directorySpecify data directoryConnect to a node to retrieve peer addresses, and disconnectConnect to a node to retrieve peer addresses, and disconnectSpecify your own public addressSpecify your own public addressAccept command line and JSON-RPC commandsAccept command line and JSON-RPC commandsIf <category> is not supplied or if <category> = 1, output all debugging information.Prune configured below the minimum of %d MiB. Please use a higher number.Prune: last wallet synchronisation goes beyond pruned data. You need to -reindex (download the whole blockchain again in case of pruned node)Reduce storage requirements by pruning (deleting) old blocks. This mode is incompatible with -txindex and -rescan. Warning: Reverting this setting requires re-downloading the entire blockchain. (default: 0 = disable pruning blocks, >%u = target size in MiB to use for block files)Rescans are not possible in pruned mode. You will need to use -reindex which will download the whole blockchain again.Error: A fatal internal error occurred, see debug.log for detailsFee (in %s/kB) to add to transactions you send (default: %s)Pruning blockstore...Run in the background as a daemon and accept commandsRun in the background as a daemon and accept commandsUnable to start HTTP server. See debug log for details.Accept connections from outside (default: 1 if no -proxy or -connect)Accept connections from outside (default: 1 if no -proxy or -connect)Bitcoin CoreBitcoin CoreThe %s developers-fallbackfee is set very high! This is the transaction fee you may pay when fee estimates are not available.A fee rate (in %s/kB) that will be used when fee estimation has insufficient data (default: %s)Accept relayed transactions received from whitelisted peers even when not relaying transactions (default: %d)Bind to given address and always listen on it. Use [host]:port notation for IPv6Bind to given address and always listen on it. Use [host]:port notation for IPv6Cannot obtain a lock on data directory %s. %s is probably already running.Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startupDistributed under the MIT software license, see the accompanying file COPYING or <http://www.opensource.org/licenses/mit-license.php>.Error loading %s: You can't enable HD on a already existing non-HD walletError reading %s! All keys read correctly, but transaction data or address book entries might be missing or incorrect.Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)Force relay of transactions from whitelisted peers even they violate local relay policy (default: %d)Maximum allowed median peer time offset adjustment. Local perspective of time may be influenced by peers forward or backward by this amount. (default: %u seconds)Maximum total fees (in %s) to use in a single wallet transaction or raw transaction; setting this too low may abort large transactions (default: %s)Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly.Please contribute if you find %s useful. Visit %s for further information about the software.Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correctThis is a pre-release test build - use at your own risk - do not use for mining or merchant applicationsThis is a pre-release test build - use at your own risk - do not use for mining or merchant applicationsUse UPnP to map the listening port (default: 1 when listening and no -proxy)Use hierarchical deterministic key generation (HD) after bip32. Only has effect during wallet creation/first startWARNING: abnormally high number of blocks generated, %d blocks received in the last %d hours (%d expected)WARNING: check your network connection, %d blocks received in the last %d hours (%d expected)Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues.Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues.Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade.Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade.Whitelist peers connecting from the given netmask or IP address. Can be specified multiple times.You need to rebuild the database using -reindex-chainstate to change -txindex%s corrupt, salvage failed-maxmempool must be at least %d MB<category> can be:Append comment to the user agent stringAttempt to recover private keys from a corrupt wallet on startupBlock creation options:Block creation options:Cannot resolve -%s address: '%s'Change index out of rangeConnect only to the specified node(s)Connect only to the specified node(s)Connection options:Copyright (C) %i-%iCorrupted block database detectedCorrupted block database detectedDebugging/Testing options:Do not load the wallet and disable wallet RPC callsDo you want to rebuild the block database now?Do you want to rebuild the block database now?Enable publish hash block in <address>Enable publish hash transaction in <address>Enable publish raw block in <address>Enable publish raw transaction in <address>Enable transaction replacement in the memory pool (default: %u)Error initializing block databaseError initializing block databaseError initializing wallet database environment %s!Error initializing wallet database environment %s!Error loading %sError loading %s: Wallet corruptedError loading %s: Wallet requires newer version of %sError loading %s: You can't disable HD on a already existing HD walletError loading block databaseError loading block databaseError opening block databaseError opening block databaseError: Disk space is low!Error: Disk space is low!Failed to listen on any port. Use -listen=0 if you want this.Failed to listen on any port. Use -listen=0 if you want this.Importing...Incorrect or no genesis block found. Wrong datadir for network?Incorrect or no genesis block found. Wrong datadir for network?Initialization sanity check failed. %s is shutting down.Invalid -onion address: '%s'Invalid amount for -%s=<amount>: '%s'Invalid amount for -fallbackfee=<amount>: '%s'Keep the transaction memory pool below <n> megabytes (default: %u)Loading banlist...Location of the auth cookie (default: data dir)Minimum bytes per sigop in transactions we relay and mine (default: %u)Not enough file descriptors available.Not enough file descriptors available.Only connect to nodes in network <net> (ipv4, ipv6 or onion)Print this help message and exitPrint version and exitPrune cannot be configured with a negative value.Prune mode is incompatible with -txindex.Rebuild chain state and block index from the blk*.dat files on diskRebuild chain state from the currently indexed blocksSet database cache size in megabytes (%d to %d, default: %d)Set maximum block size in bytes (default: %d)Specify wallet file (within data directory)Specify wallet file (within data directory)The source code is available from %s.Unable to bind to %s on this computer. %s is probably already running.Unsupported argument -benchmark ignored, use -debug=bench.Unsupported argument -debugnet ignored, use -debug=net.Unsupported argument -tor found, use -onion.Use UPnP to map the listening port (default: %u)User Agent comment (%s) contains unsafe characters.Verifying blocks...Verifying blocks...Verifying wallet...Verifying wallet...Wallet %s resides outside data directory %sWallet %s resides outside data directory %sWallet debugging/testing options:Wallet needed to be rewritten: restart %s to completeWallet options:Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple timesBind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6. This option can be specified multiple times (default: bind to all interfaces)Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)Discover own IP addresses (default: 1 when listening and no -externalip or -proxy)Error: Listening for incoming connections failed (listen returned error %s)Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)Fees (in %s/kB) smaller than this are considered zero fee for relaying, mining and transaction creation (default: %s)If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u)Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions)Maximum size of data in data carrier transactions we relay and mine (default: %u)Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect)Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u)Set maximum size of high-priority/low-fee transactions in bytes (default: %d)The transaction amount is too small to send after the fee has been deductedThis product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit <https://www.openssl.org/> and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard.Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gatewayYou need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain(default: %u)Accept public REST requests (default: %u)Automatically create Tor hidden service (default: %d)Connect through SOCKS5 proxyError reading from database, shutting down.Imports blocks from external blk000??.dat file on startupInformationInformationInvalid amount for -paytxfee=<amount>: '%s' (must be at least %s)Invalid netmask specified in -whitelist: '%s'Keep at most <n> unconnectable transactions in memory (default: %u)Need to specify a port with -whitebind: '%s'Node relay options:RPC server options:Reducing -maxconnections from %d to %d, because of system limitations.Rescan the block chain for missing wallet transactions on startupSend trace/debug info to console instead of debug.log fileSend trace/debug info to console instead of debug.log fileSend transactions as zero-fee transactions if possible (default: %u)Show all debugging options (usage: --help -help-debug)Shrink debug.log file on client startup (default: 1 when no -debug)Shrink debug.log file on client startup (default: 1 when no -debug)Signing transaction failedSigning transaction failedThe transaction amount is too small to pay the feeThis is experimental software.Tor control port password (default: empty)Tor control port to use if onion listening enabled (default: %s)Transaction amount too smallTransaction amount too smallTransaction amounts must be positiveTransaction amounts must be positiveTransaction too large for fee policyTransaction too largeTransaction too largeUnable to bind to %s on this computer (bind returned error %s)Upgrade wallet to latest format on startupUsername for JSON-RPC connectionsUsername for JSON-RPC connectionsWarningWarningWarning: unknown new rules activated (versionbit %i)Whether to operate in a blocks only mode (default: %u)Zapping all transactions from wallet...ZeroMQ notification options:Password for JSON-RPC connectionsPassword for JSON-RPC connectionsExecute command when the best block changes (%s in cmd is replaced by block hash)Execute command when the best block changes (%s in cmd is replaced by block hash)Allow DNS lookups for -addnode, -seednode and -connectAllow DNS lookups for -addnode, -seednode and -connectLoading addresses...Loading addresses...(1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)-maxtxfee is set very high! Fees this large could be paid on a single transaction.-paytxfee is set very high! This is the transaction fee you will pay if you send a transaction.Do not keep transactions in the mempool longer than <n> hours (default: %u)Fees (in %s/kB) smaller than this are considered zero fee for transaction creation (default: %s)How thorough the block verification of -checkblocks is (0-4, default: %u)Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u)Number of seconds to keep misbehaving peers from reconnecting (default: %u)Output debugging information (default: %u, supplying <category> is optional)Support filtering of blocks and transaction with bloom filters (default: %u)Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments.Tries to keep outbound traffic under the given target (in MiB per 24h), 0 = no limit (default: %d)Unsupported argument -socks found. Setting SOCKS version isn't possible anymore, only SOCKS5 proxies are supported.Unsupported argument -whitelistalwaysrelay ignored, use -whitelistrelay and/or -whitelistforcerelay.Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)Username and hashed password for JSON-RPC connections. The field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A canonical python script is included in share/rpcuser. This option can be specified multiple timesWarning: Unknown block versions being mined! It's possible unknown rules are in effectWarning: Wallet file corrupt, data salvaged! Original %s saved as %s in %s; if your balance or transactions are incorrect you should restore from a backup.(default: %s)Always query for peer addresses via DNS lookup (default: %u)How many blocks to check at startup (default: %u, 0 = all)Include IP addresses in debug output (default: %u)Invalid -proxy address: '%s'Invalid -proxy address: '%s'Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)Listen for connections on <port> (default: %u or testnet: %u)Maintain at most <n> connections to peers (default: %u)Make the wallet broadcast transactionsMaximum per-connection receive buffer, <n>*1000 bytes (default: %u)Maximum per-connection send buffer, <n>*1000 bytes (default: %u)Prepend debug output with timestamp (default: %u)Relay and mine data carrier transactions (default: %u)Relay non-P2SH multisig (default: %u)Set key pool size to <n> (default: %u)Set minimum block size in bytes (default: %u)Set the number of threads to service RPC calls (default: %d)Specify configuration file (default: %s)Specify connection timeout in milliseconds (minimum: 1, default: %d)Specify pid file (default: %s)Spend unconfirmed change when sending transactions (default: %u)Threshold for disconnecting misbehaving peers (default: %u)Unknown network specified in -onlynet: '%s'Unknown network specified in -onlynet: '%s'Insufficient fundsInsufficient fundsLoading block index...Loading block index...Add a node to connect to and attempt to keep the connection openAdd a node to connect to and attempt to keep the connection openLoading wallet...Loading wallet...Cannot downgrade walletCannot downgrade walletCannot write default addressCannot write default addressRescanning...Rescanning...Done loadingDone loadingErrorError