AddressBookPageRight-click to edit address or labelCreate a new addressCreate a new address&NewCopy the currently selected address to the system clipboardCopy the currently selected address to the system clipboard&CopyC&lose&Copy Address&Copy AddressDelete the currently selected address from the listDelete the currently selected address from the listExport the data in the current tab to a fileExport the data in the current tab to a file&Export&Export&Delete&DeleteChoose the address to send coins toChoose the address to receive coins withC&hooseSending addressesReceiving addressesThese are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins.These are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins.These are your Bitcoin addresses for receiving payments. It is recommended to use a new receiving address for each transaction.Copy &LabelCopy &Label&Edit&EditExport Address ListComma separated file (*.csv)Comma separated file (*.csv)Exporting FailedThere was an error trying to save the address list to %1. Please try again.AddressTableModelLabelLabelAddressAddress(no label)(no label)AskPassphraseDialogPassphrase DialogPassphrase DialogEnter passphraseEnter passphraseNew passphraseNew passphraseRepeat new passphraseRepeat new passphraseEncrypt walletEncrypt walletThis operation needs your wallet passphrase to unlock the wallet.This operation needs your wallet passphrase to unlock the wallet.Unlock walletUnlock walletThis operation needs your wallet passphrase to decrypt the wallet.This operation needs your wallet passphrase to decrypt the wallet.Decrypt walletDecrypt walletChange passphraseChange passphraseConfirm wallet encryptionConfirm wallet encryptionWarning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR BITCOINS</b>!Warning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR BITCOINS</b>!Are you sure you wish to encrypt your wallet?Are you sure you wish to encrypt your wallet?Bitcoin Core will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer.IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet.IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet.Warning: The Caps Lock key is on!Warning: The Caps Lock key is on!Wallet encryptedWallet encryptedEnter the new passphrase to the wallet.<br/>Please use a passphrase of <b>ten or more random characters</b>, or <b>eight or more words</b>.Enter the old passphrase and new passphrase to the wallet.Wallet encryption failedWallet encryption failedWallet encryption failed due to an internal error. Your wallet was not encrypted.Wallet encryption failed due to an internal error. Your wallet was not encrypted.The supplied passphrases do not match.The supplied passphrases do not match.Wallet unlock failedWallet unlock failedThe passphrase entered for the wallet decryption was incorrect.The passphrase entered for the wallet decryption was incorrect.Wallet decryption failedWallet decryption failedWallet passphrase was successfully changed.Wallet passphrase was successfully changed.BitcoinGUISign &message...Sign &message...Synchronizing with network...Synchronizing with network...&Overview&OverviewNodeShow general overview of walletShow general overview of wallet&Transactions&TransactionsBrowse transaction historyBrowse transaction historyE&xitE&xitQuit applicationQuit applicationAbout &QtAbout &QtShow information about QtShow information about Qt&Options...&Options...&Encrypt Wallet...&Encrypt Wallet...&Backup Wallet...&Backup Wallet...&Change Passphrase...&Change Passphrase...&Sending addresses...&Receiving addresses...Open &URI...Bitcoin Core clientImporting blocks from disk...Importing blocks from disk...Reindexing blocks on disk...Reindexing blocks on disk...Send coins to a Bitcoin addressSend coins to a Bitcoin addressBackup wallet to another locationBackup wallet to another locationChange the passphrase used for wallet encryptionChange the passphrase used for wallet encryption&Debug window&Debug windowOpen debugging and diagnostic consoleOpen debugging and diagnostic console&Verify message...&Verify message...BitcoinBitcoinWalletWallet&Send&Send&Receive&ReceiveShow information about Bitcoin Core&Show / Hide&Show / HideShow or hide the main WindowShow or hide the main WindowEncrypt the private keys that belong to your walletEncrypt the private keys that belong to your walletSign messages with your Bitcoin addresses to prove you own themSign messages with your Bitcoin addresses to prove you own themVerify messages to ensure they were signed with specified Bitcoin addressesVerify messages to ensure they were signed with specified Bitcoin addresses&File&File&Settings&Settings&Help&HelpTabs toolbarTabs toolbarBitcoin CoreBitcoin CoreRequest payments (generates QR codes and bitcoin: URIs)&About Bitcoin CoreModify configuration options for Bitcoin CoreShow the list of used sending addresses and labelsShow the list of used receiving addresses and labelsOpen a bitcoin: URI or payment request&Command-line optionsShow the Bitcoin Core help message to get a list with possible Bitcoin command-line options%n active connection(s) to Bitcoin network%n active connection to Bitcoin network%n active connections to Bitcoin networkNo block source available...No block source available...%n hour(s)%n hour%n hours%n day(s)%n day%n days%n week(s)%n week%n weeks%1 and %2%n year(s)%n year%n years%1 behind%1 behindLast received block was generated %1 ago.Last received block was generated %1 ago.Transactions after this will not yet be visible.Transactions after this will not yet be visible.ErrorErrorWarningWarningInformationInformationUp to dateUp to dateProcessed %n blocks of transaction history.Catching up...Catching up...Date: %1
Amount: %1
Type: %1
Label: %1
Address: %1
Sent transactionSent transactionIncoming transactionIncoming transactionWallet is <b>encrypted</b> and currently <b>unlocked</b>Wallet is <b>encrypted</b> and currently <b>unlocked</b>Wallet is <b>encrypted</b> and currently <b>locked</b>Wallet is <b>encrypted</b> and currently <b>locked</b>ClientModelNetwork AlertNetwork AlertCoinControlDialogCoin SelectionQuantity:Bytes:Amount:Priority:Fee:Dust:After Fee:Change:(un)select allTree modeList modeAmountAmountReceived with labelReceived with addressDateDateConfirmationsConfirmedConfirmedPriorityCopy addressCopy addressCopy labelCopy labelCopy amountCopy amountCopy transaction IDCopy transaction IDLock unspentUnlock unspentCopy quantityCopy feeCopy after feeCopy bytesCopy priorityCopy dustCopy changehighesthigherhighmedium-highmediumlow-mediumlowlowerlowest(%1 locked)noneThis label turns red if the transaction size is greater than 1000 bytes.This label turns red if the priority is smaller than "medium".This label turns red if any recipient receives an amount smaller than %1.Can vary +/- %1 satoshi(s) per input.yesnoThis means a fee of at least %1 per kB is required.Can vary +/- 1 byte per input.Transactions with higher priority are more likely to get included into a block.(no label)(no label)change from %1 (%2)(change)EditAddressDialogEdit AddressEdit Address&Label&LabelThe label associated with this address list entryThe address associated with this address list entry. This can only be modified for sending addresses.&Address&AddressNew receiving addressNew receiving addressNew sending addressNew sending addressEdit receiving addressEdit receiving addressEdit sending addressEdit sending addressThe entered address "%1" is already in the address book.The entered address "%1" is already in the address book.The entered address "%1" is not a valid Bitcoin address.The entered address "%1" is not a valid Bitcoin address.Could not unlock wallet.Could not unlock wallet.New key generation failed.New key generation failed.FreespaceCheckerA new data directory will be created.A new data directory will be created.namenameDirectory already exists. Add %1 if you intend to create a new directory here.Directory already exists. Add %1 if you intend to create a new directory here.Path already exists, and is not a directory.Path already exists, and is not a directory.Cannot create data directory here.Cannot create data directory here.HelpMessageDialogBitcoin CoreBitcoin Coreversionversion(%1-bit)About Bitcoin CoreCommand-line optionsUsage:Usage:command-line optionscommand-line optionsIntroWelcomeWelcomeWelcome to Bitcoin Core.As this is the first time the program is launched, you can choose where Bitcoin Core will store its data.Bitcoin Core will download and store a copy of the Bitcoin block chain. At least %1GB of data will be stored in this directory, and it will grow over time. The wallet will also be stored in this directory.Use the default data directoryUse the default data directoryUse a custom data directory:Use a custom data directory:Bitcoin CoreBitcoin CoreError: Specified data directory "%1" cannot be created.ErrorError%n GB of free space available(of %n GB needed)OpenURIDialogOpen URIOpen payment request from URI or fileURI:Select payment request fileSelect payment request file to openOptionsDialogOptionsOptions&Main&MainSize of &database cacheMBNumber of script &verification threadsAccept connections from outsideAllow incoming connectionsIP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1)Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Exit in the menu.The user interface language can be set here. This setting will take effect after restarting Bitcoin Core.Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |.Third party transaction URLsActive command-line options that override above options:Reset all client options to default.Reset all client options to default.&Reset Options&Reset Options&Network&NetworkAutomatically start Bitcoin Core after logging in to the system.&Start Bitcoin Core on system login(0 = auto, <0 = leave that many cores free)W&alletExpertEnable coin &control featuresIf you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed.&Spend unconfirmed changeAutomatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled.Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled.Map port using &UPnPMap port using &UPnPConnect to the Bitcoin network through a SOCKS5 proxy.&Connect through SOCKS5 proxy (default proxy):Proxy &IP:Proxy &IP:&Port:&Port:Port of the proxy (e.g. 9050)Port of the proxy (e.g. 9050)&Window&WindowShow only a tray icon after minimizing the window.Show only a tray icon after minimizing the window.&Minimize to the tray instead of the taskbar&Minimize to the tray instead of the taskbarM&inimize on closeM&inimize on close&Display&DisplayUser Interface &language:User Interface &language:&Unit to show amounts in:&Unit to show amounts in:Choose the default subdivision unit to show in the interface and when sending coins.Choose the default subdivision unit to show in the interface and when sending coins.Whether to show coin control features or not.&OK&OK&Cancel&CanceldefaultdefaultnoneConfirm options resetConfirm options resetClient restart required to activate changes.Client will be shut down. Do you want to proceed?This change would require a client restart.The supplied proxy address is invalid.The supplied proxy address is invalid.OverviewPageFormFormThe displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet.The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet.Watch-only:Available:Your current spendable balanceYour current spendable balancePending:Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balanceTotal of transactions that have yet to be confirmed, and do not yet count toward the spendable balanceImmature:Immature:Mined balance that has not yet maturedMined balance that has not yet maturedBalancesTotal:Total:Your current total balanceYour current total balanceYour current balance in watch-only addressesSpendable:Recent transactionsUnconfirmed transactions to watch-only addressesMined balance in watch-only addresses that has not yet maturedCurrent total balance in watch-only addressesout of syncout of syncPaymentServerURI handlingURI handlingInvalid payment address %1Payment request rejectedPayment request network doesn't match client network.Payment request is not initialized.Requested payment amount of %1 is too small (considered dust).Payment request errorCannot start bitcoin: click-to-pay handlerPayment request fetch URL is invalid: %1URI cannot be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters.Payment request file handlingPayment request file cannot be read! This can be caused by an invalid payment request file.Payment request expired.Unverified payment requests to custom payment scripts are unsupported.Invalid payment request.Refund from %1Payment request %1 is too large (%2 bytes, allowed %3 bytes).Payment request DoS protectionError communicating with %1: %2Payment request cannot be parsed!Bad response from server %1Payment acknowledgedNetwork request errorPeerTableModelUser AgentNode/ServicePing TimeQObjectAmountAmountEnter a Bitcoin address (e.g. %1)%1 d%1 h%1 m%1 sNoneN/AN/A%1 msQRImageWidget&Save Image...&Copy ImageSave QR CodeSave QR CodePNG Image (*.png)RPCConsoleClient nameClient nameN/AN/AClient versionClient version&Information&InformationDebug windowGeneralUsing OpenSSL versionUsing OpenSSL versionUsing BerkeleyDB versionStartup timeStartup timeNetworkNetworkNameNumber of connectionsNumber of connectionsBlock chainBlock chainCurrent number of blocksCurrent number of blocksOpen the Bitcoin Core debug log file from the current data directory. This can take a few seconds for large log files.ReceivedSent&PeersSelect a peer to view detailed information.DirectionVersionUser AgentServicesStarting HeightSync HeightBan ScoreConnection TimeLast SendLast ReceiveBytes SentBytes ReceivedPing TimeTime OffsetLast block timeLast block time&Open&Open&Console&Console&Network Traffic&ClearTotalsIn:Out:Build dateBuild dateDebug log fileDebug log fileClear consoleClear consoleWelcome to the Bitcoin Core RPC console.Use up and down arrows to navigate history, and <b>Ctrl-L</b> to clear screen.Use up and down arrows to navigate history, and <b>Ctrl-L</b> to clear screen.Type <b>help</b> for an overview of available commands.Type <b>help</b> for an overview of available commands.%1 B%1 KB%1 MB%1 GBvia %1neverInboundOutboundUnknownFetching...ReceiveCoinsDialog&Amount:&Label:&Label:&Message:Reuse one of the previously used receiving addresses. Reusing addresses has security and privacy issues. Do not use this unless re-generating a payment request made before.R&euse an existing receiving address (not recommended)An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network.An optional label to associate with the new receiving address.Use this form to request payments. All fields are <b>optional</b>.An optional amount to request. Leave this empty or zero to not request a specific amount.Clear all fields of the form.ClearRequested payments history&Request paymentShow the selected request (does the same as double clicking an entry)ShowRemove the selected entries from the listRemoveCopy labelCopy labelCopy messageCopy amountCopy amountReceiveRequestDialogQR CodeCopy &URICopy &Address&Save Image...Request payment to %1Payment informationURIAddressAddressAmountAmountLabelLabelMessageMessageResulting URI too long, try to reduce the text for label / message.Resulting URI too long, try to reduce the text for label / message.Error encoding URI into QR Code.Error encoding URI into QR Code.RecentRequestsTableModelDateDateLabelLabelMessageMessageAmountAmount(no label)(no label)(no message)(no amount)SendCoinsDialogSend CoinsSend CoinsCoin Control FeaturesInputs...automatically selectedInsufficient funds!Quantity:Bytes:Amount:Priority:Fee:After Fee:Change:If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address.Custom change addressTransaction Fee:Choose...collapse fee-settingsper kilobyteIf the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "total at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte.Hidetotal at leastPaying only the minimum fee is just fine as long as there is less transaction volume than space in the blocks. But be aware that this can end up in a never confirming transaction once there is more demand for bitcoin transactions than the network can process.(read the tooltip)Recommended:Custom:(Smart fee not initialized yet. This usually takes a few blocks...)Confirmation time:normalfastSend as zero-fee transaction if possible(confirmation may take longer)Send to multiple recipients at onceSend to multiple recipients at onceAdd &RecipientAdd &RecipientClear all fields of the form.Dust:Clear &AllClear &AllBalance:Balance:Confirm the send actionConfirm the send actionS&endS&endConfirm send coinsConfirm send coins%1 to %2Copy quantityCopy amountCopy amountCopy feeCopy after feeCopy bytesCopy priorityCopy changeTotal Amount %1 (= %2)orThe amount to pay must be larger than 0.The amount to pay must be larger than 0.The amount exceeds your balance.The amount exceeds your balance.The total exceeds your balance when the %1 transaction fee is included.The total exceeds your balance when the %1 transaction fee is included.Transaction creation failed!The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.A fee higher than %1 is considered an absurdly high fee.Payment request expired.Estimated to begin confirmation within %n block(s).Pay only the minimum fee of %1The recipient address is not valid. Please recheck.Duplicate address found: addresses should only be used once each.Warning: Invalid Bitcoin address(no label)(no label)Warning: Unknown change addressCopy dustAre you sure you want to send?added as transaction feeSendCoinsEntryA&mount:A&mount:Pay &To:Pay &To:Enter a label for this address to add it to your address bookEnter a label for this address to add it to your address book&Label:&Label:Choose previously used addressThis is a normal payment.The Bitcoin address to send the payment toAlt+AAlt+APaste address from clipboardPaste address from clipboardAlt+PAlt+PRemove this entryThe fee will be deducted from the amount being sent. The recipient will receive less bitcoins than you enter in the amount field. If multiple recipients are selected, the fee is split equally.S&ubtract fee from amountMessage:This is an unauthenticated payment request.This is an authenticated payment request.Enter a label for this address to add it to the list of used addressesA message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network.Pay To:Memo:ShutdownWindowBitcoin Core is shutting down...Do not shut down the computer until this window disappears.SignVerifyMessageDialogSignatures - Sign / Verify a MessageSignatures - Sign / Verify a Message&Sign Message&Sign MessageYou can sign messages/agreements with your addresses to prove you can receive bitcoins sent to them. Be careful not to sign anything vague or random, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to.The Bitcoin address to sign the message withChoose previously used addressAlt+AAlt+APaste address from clipboardPaste address from clipboardAlt+PAlt+PEnter the message you want to sign hereEnter the message you want to sign hereSignatureSignatureCopy the current signature to the system clipboardCopy the current signature to the system clipboardSign the message to prove you own this Bitcoin addressSign the message to prove you own this Bitcoin addressSign &MessageSign &MessageReset all sign message fieldsReset all sign message fieldsClear &AllClear &All&Verify Message&Verify MessageEnter the receiver's address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Note that this only proves the signing party receives with the address, it cannot prove sendership of any transaction!The Bitcoin address the message was signed withVerify the message to ensure it was signed with the specified Bitcoin addressVerify the message to ensure it was signed with the specified Bitcoin addressVerify &MessageVerify &MessageReset all verify message fieldsReset all verify message fieldsClick "Sign Message" to generate signatureClick "Sign Message" to generate signatureThe entered address is invalid.The entered address is invalid.Please check the address and try again.Please check the address and try again.The entered address does not refer to a key.The entered address does not refer to a key.Wallet unlock was cancelled.Wallet unlock was cancelled.Private key for the entered address is not available.Private key for the entered address is not available.Message signing failed.Message signing failed.Message signed.Message signed.The signature could not be decoded.The signature could not be decoded.Please check the signature and try again.Please check the signature and try again.The signature did not match the message digest.The signature did not match the message digest.Message verification failed.Message verification failed.Message verified.Message verified.SplashScreenBitcoin CoreBitcoin CoreThe Bitcoin Core developers[testnet][testnet]TrafficGraphWidgetKB/sTransactionDescOpen until %1Open until %1conflicted%1/offline%1/offline%1/unconfirmed%1/unconfirmed%1 confirmations%1 confirmationsStatusStatus, broadcast through %n node(s), broadcast through %n node, broadcast through %n nodesDateDateSourceSourceGeneratedGeneratedFromFromToToown addressown addresswatch-onlylabellabelCreditCreditmatures in %n more block(s)matures in %n more blockmatures in %n more blocksnot acceptednot acceptedDebitDebitTotal debitTotal creditTransaction feeTransaction feeNet amountNet amountMessageMessageCommentCommentTransaction IDTransaction IDMerchantGenerated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.Debug informationDebug informationTransactionTransactionInputsInputsAmountAmounttruetruefalsefalse, has not been successfully broadcast yet, has not been successfully broadcast yetOpen for %n more block(s)Open for %n more blockOpen for %n more blocksunknownunknownTransactionDescDialogTransaction detailsTransaction detailsThis pane shows a detailed description of the transactionThis pane shows a detailed description of the transactionTransactionTableModelDateDateTypeTypeImmature (%1 confirmations, will be available after %2)Open for %n more block(s)Open for %n more blockOpen for %n more blocksOpen until %1Open until %1Confirmed (%1 confirmations)Confirmed (%1 confirmations)This block was not received by any other nodes and will probably not be accepted!This block was not received by any other nodes and will probably not be accepted!Generated but not acceptedGenerated but not acceptedOfflineLabelLabelUnconfirmedConfirming (%1 of %2 recommended confirmations)ConflictedReceived withReceived withReceived fromReceived fromSent toSent toPayment to yourselfPayment to yourselfMinedMinedwatch-only(n/a)(n/a)Transaction status. Hover over this field to show number of confirmations.Transaction status. Hover over this field to show number of confirmations.Date and time that the transaction was received.Date and time that the transaction was received.Type of transaction.Type of transaction.Whether or not a watch-only address is involved in this transaction.User-defined intent/purpose of the transaction.Amount removed from or added to balance.Amount removed from or added to balance.TransactionViewAllAllTodayTodayThis weekThis weekThis monthThis monthLast monthLast monthThis yearThis yearRange...Range...Received withReceived withSent toSent toTo yourselfTo yourselfMinedMinedOtherOtherEnter address or label to searchEnter address or label to searchMin amountMin amountCopy addressCopy addressCopy labelCopy labelCopy amountCopy amountCopy transaction IDCopy transaction IDEdit labelEdit labelShow transaction detailsShow transaction detailsExport Transaction HistoryWatch-onlyExporting FailedThere was an error trying to save the transaction history to %1.Exporting SuccessfulThe transaction history was successfully saved to %1.Comma separated file (*.csv)Comma separated file (*.csv)ConfirmedConfirmedDateDateTypeTypeLabelLabelAddressAddressIDIDRange:Range:totoUnitDisplayStatusBarControlUnit to show amounts in. Click to select another unit.WalletFrameNo wallet has been loaded.WalletModelSend CoinsSend CoinsWalletView&Export&ExportExport the data in the current tab to a fileExport the data in the current tab to a fileBackup WalletBackup WalletWallet Data (*.dat)Wallet Data (*.dat)Backup FailedBackup FailedThere was an error trying to save the wallet data to %1.The wallet data was successfully saved to %1.Backup SuccessfulBackup Successfulbitcoin-coreOptions:Options:Specify data directorySpecify data directoryConnect to a node to retrieve peer addresses, and disconnectConnect to a node to retrieve peer addresses, and disconnectSpecify your own public addressSpecify your own public addressAccept command line and JSON-RPC commandsAccept command line and JSON-RPC commandsRun in the background as a daemon and accept commandsRun in the background as a daemon and accept commandsUse the test networkUse the test networkAccept connections from outside (default: 1 if no -proxy or -connect)Accept connections from outside (default: 1 if no -proxy or -connect)Bind to given address and always listen on it. Use [host]:port notation for IPv6Bind to given address and always listen on it. Use [host]:port notation for IPv6Continuously rate-limit free transactions to <n>*1000 bytes per minute (default: %u)Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startupDistributed under the MIT software license, see the accompanying file COPYING or <http://www.opensource.org/licenses/mit-license.php>.Enter regression test mode, which uses a special chain in which blocks can be solved instantly.Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)In this mode -genproclimit controls how many blocks are generated immediately.Maximum total fees to use in a single wallet transaction; setting this too low may abort large transactions (default: %s)Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)This is a pre-release test build - use at your own risk - do not use for mining or merchant applicationsThis is a pre-release test build - use at your own risk - do not use for mining or merchant applicationsUnable to bind to %s on this computer. Bitcoin Core is probably already running.Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction.Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction.Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues.Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues.Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade.Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade.Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect.Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect.Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup.Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup.Whitelist peers connecting from the given netmask or IP address. Can be specified multiple times.(default: 1)<category> can be:Attempt to recover private keys from a corrupt wallet.datAttempt to recover private keys from a corrupt wallet.datBlock creation options:Block creation options:Connect only to the specified node(s)Connect only to the specified node(s)Connection options:Corrupted block database detectedCorrupted block database detectedDebugging/Testing options:Do not load the wallet and disable wallet RPC callsDo you want to rebuild the block database now?Do you want to rebuild the block database now?Error initializing block databaseError initializing block databaseError initializing wallet database environment %s!Error initializing wallet database environment %s!Error loading block databaseError loading block databaseError opening block databaseError opening block databaseError: A fatal internal error occured, see debug.log for detailsError: Disk space is low!Error: Disk space is low!Failed to listen on any port. Use -listen=0 if you want this.Failed to listen on any port. Use -listen=0 if you want this.If <category> is not supplied, output all debugging information.Importing...Incorrect or no genesis block found. Wrong datadir for network?Incorrect or no genesis block found. Wrong datadir for network?Invalid -onion address: '%s'Not enough file descriptors available.Not enough file descriptors available.Only connect to nodes in network <net> (ipv4, ipv6 or onion)Prune cannot be configured with a negative value.Prune mode is incompatible with -txindex.Rebuild block chain index from current blk000??.dat filesRebuild block chain index from current blk000??.dat filesSet database cache size in megabytes (%d to %d, default: %d)Set maximum block size in bytes (default: %d)Specify wallet file (within data directory)Specify wallet file (within data directory)This is intended for regression testing tools and app development.Use UPnP to map the listening port (default: %u)Verifying blocks...Verifying blocks...Verifying wallet...Verifying wallet...Wallet %s resides outside data directory %sWallet %s resides outside data directory %sWallet options:Warning: This version is obsolete; upgrade required!You need to rebuild the database using -reindex to change -txindexYou need to rebuild the database using -reindex to change -txindexImports blocks from external blk000??.dat fileImports blocks from external blk000??.dat fileAllow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple timesAn error occurred while setting up the RPC address %s port %u for listening: %sBind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6. This option can be specified multiple times (default: bind to all interfaces)Cannot obtain a lock on data directory %s. Bitcoin Core is probably already running.Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality)Discover own IP addresses (default: 1 when listening and no -externalip or -proxy)Error: Listening for incoming connections failed (listen returned error %s)Error: Unsupported argument -socks found. Setting SOCKS version isn't possible anymore, only SOCKS5 proxies are supported.Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)Fees (in BTC/Kb) smaller than this are considered zero fee for relaying (default: %s)Fees (in BTC/Kb) smaller than this are considered zero fee for transaction creation (default: %s)If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u)Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions)Maximum size of data in data carrier transactions we relay and mine (default: %u)Prune configured below the minimum of %d MB. Please use a higher number.Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect)Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u)Reduce storage requirements by pruning (deleting) old blocks. This mode disables wallet support and is incompatible with -txindex.Require high priority for relaying free or low-fee transactions (default: %u)Set maximum size of high-priority/low-fee transactions in bytes (default: %d)Set the number of threads for coin generation if enabled (-1 = all cores, default: %d)The transaction amount is too small to send after the fee has been deductedThis product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit <https://www.openssl.org/> and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard.To use bitcoind, or the -server option to bitcoin-qt, you must set an rpcpassword in the configuration file:
%s
It is recommended you use the following random password:
rpcuser=bitcoinrpc
rpcpassword=%s
(you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions.
It is also recommended to set alertnotify so you are notified of problems;
for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com
Warning: -maxtxfee is set very high! Fees this large could be paid on a single transaction.Warning: Please check that your computer's date and time are correct! If your clock is wrong Bitcoin Core will not work properly.Warning: Reverting this setting requires re-downloading the entire blockchain.Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gatewayYou need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain(default: %u)(default: 0 = disable pruning blocks,>%u = target size in MiB to use for block files)Accept public REST requests (default: %u)Allow self signed root certificates (default: 0)Can't run with a wallet in prune mode.Cannot resolve -whitebind address: '%s'Choose data directory on startup (default: 0)Choose data directory on startup (default: 0)Connect through SOCKS5 proxyCopyright (C) 2009-%i The Bitcoin Core DevelopersCould not parse -rpcbind value %s as network addressError loading wallet.dat: Wallet requires newer version of Bitcoin CoreError reading from database, shutting down.Error: Unsupported argument -tor found, use -onion.Fee (in BTC/kB) to add to transactions you send (default: %s)InformationInformationInitialization sanity check failed. Bitcoin Core is shutting down.Invalid amount for -maxtxfee=<amount>: '%s'Invalid amount for -minrelaytxfee=<amount>: '%s'Invalid amount for -minrelaytxfee=<amount>: '%s'Invalid amount for -mintxfee=<amount>: '%s'Invalid amount for -mintxfee=<amount>: '%s'Invalid amount for -paytxfee=<amount>: '%s' (must be at least %s)Invalid netmask specified in -whitelist: '%s'Keep at most <n> unconnectable transactions in memory (default: %u)Need to specify a port with -whitebind: '%s'Node relay options:RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions)RPC server options:RPC support for HTTP persistent connections (default: %d)Randomly drop 1 of every <n> network messagesRandomly fuzz 1 of every <n> network messagesSend trace/debug info to console instead of debug.log fileSend trace/debug info to console instead of debug.log fileSend transactions as zero-fee transactions if possible (default: %u)Set SSL root certificates for payment request (default: -system-)Set language, for example "de_DE" (default: system locale)Set language, for example "de_DE" (default: system locale)Show all debugging options (usage: --help -help-debug)Show splash screen on startup (default: 1)Show splash screen on startup (default: 1)Shrink debug.log file on client startup (default: 1 when no -debug)Shrink debug.log file on client startup (default: 1 when no -debug)Signing transaction failedSigning transaction failedStart minimizedStart minimizedThe transaction amount is too small to pay the feeThis is experimental software.Transaction amount too smallTransaction amount too smallTransaction amounts must be positiveTransaction amounts must be positiveTransaction too large for fee policyTransaction too largeTransaction too largeUI Options:Unable to bind to %s on this computer (bind returned error %s)Use UPnP to map the listening port (default: 1 when listening)Use UPnP to map the listening port (default: 1 when listening)Username for JSON-RPC connectionsUsername for JSON-RPC connectionsWallet needed to be rewritten: restart Bitcoin Core to completeWarningWarningWarning: Unsupported argument -benchmark ignored, use -debug=bench.Warning: Unsupported argument -debugnet ignored, use -debug=net.Zapping all transactions from wallet...on startupwallet.dat corrupt, salvage failedwallet.dat corrupt, salvage failedPassword for JSON-RPC connectionsPassword for JSON-RPC connectionsExecute command when the best block changes (%s in cmd is replaced by block hash)Execute command when the best block changes (%s in cmd is replaced by block hash)Upgrade wallet to latest formatUpgrade wallet to latest formatRescan the block chain for missing wallet transactionsRescan the block chain for missing wallet transactionsUse OpenSSL (https) for JSON-RPC connectionsUse OpenSSL (https) for JSON-RPC connectionsThis help messageThis help messageAllow DNS lookups for -addnode, -seednode and -connectAllow DNS lookups for -addnode, -seednode and -connectLoading addresses...Loading addresses...Error loading wallet.dat: Wallet corruptedError loading wallet.dat: Wallet corrupted(1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data)Flush database activity from memory pool to disk log every <n> megabytes (default: %u)How thorough the block verification of -checkblocks is (0-4, default: %u)Log transaction priority and fee per kB when mining blocks (default: %u)Maintain a full transaction index, used by the getrawtransaction rpc call (default: %u)Number of seconds to keep misbehaving peers from reconnecting (default: %u)Output debugging information (default: %u, supplying <category> is optional)Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)(default: %s)Acceptable ciphers (default: %s)Always query for peer addresses via DNS lookup (default: %u)Disable safemode, override a real safe mode event (default: %u)Error loading wallet.datError loading wallet.datForce safe mode (default: %u)Generate coins (default: %u)How many blocks to check at startup (default: %u, 0 = all)Include IP addresses in debug output (default: %u)Invalid -proxy address: '%s'Invalid -proxy address: '%s'Limit size of signature cache to <n> entries (default: %u)Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)Listen for connections on <port> (default: %u or testnet: %u)Maintain at most <n> connections to peers (default: %u)Make the wallet broadcast transactionsMaximum per-connection receive buffer, <n>*1000 bytes (default: %u)Maximum per-connection send buffer, <n>*1000 bytes (default: %u)Only accept block chain matching built-in checkpoints (default: %u)Prepend debug output with timestamp (default: %u)Relay and mine data carrier transactions (default: %u)Relay non-P2SH multisig (default: %u)Run a thread to flush wallet periodically (default: %u)Server certificate file (default: %s)Server private key (default: %s)Set key pool size to <n> (default: %u)Set minimum block size in bytes (default: %u)Set the number of threads to service RPC calls (default: %d)Sets the DB_PRIVATE flag in the wallet db environment (default: %u)Specify configuration file (default: %s)Specify connection timeout in milliseconds (minimum: 1, default: %d)Specify pid file (default: %s)Spend unconfirmed change when sending transactions (default: %u)Stop running after importing blocks from disk (default: %u)Threshold for disconnecting misbehaving peers (default: %u)Unknown network specified in -onlynet: '%s'Unknown network specified in -onlynet: '%s'Cannot resolve -bind address: '%s'Cannot resolve -bind address: '%s'Cannot resolve -externalip address: '%s'Cannot resolve -externalip address: '%s'Invalid amount for -paytxfee=<amount>: '%s'Invalid amount for -paytxfee=<amount>: '%s'Insufficient fundsInsufficient fundsLoading block index...Loading block index...Add a node to connect to and attempt to keep the connection openAdd a node to connect to and attempt to keep the connection openLoading wallet...Loading wallet...Cannot downgrade walletCannot downgrade walletCannot write default addressCannot write default addressRescanning...Rescanning...Done loadingDone loadingErrorError