AboutDialogAbout Bitcoin Core<b>Bitcoin Core</b> version
This is experimental software.
Distributed under the MIT/X11 software license, see the accompanying file COPYING or http://www.opensource.org/licenses/mit-license.php.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) and cryptographic software written by Eric Young (eay@cryptsoft.com) and UPnP software written by Thomas Bernard.
Dette program er eksperimentelt.
Det er gjort tilgængeligt under MIT/X11-softwarelicensen. Se den medfølgende fil "COPYING" eller http://www.opensource.org/licenses/mit-license.php.
Produktet indeholder software som er udviklet af OpenSSL Project til brug i OpenSSL Toolkit (http://www.openssl.org/), kryptografisk software skrevet af Eric Young (eay@cryptsoft.com) og UPnP-software skrevet af Thomas Bernard.CopyrightCopyrightThe Bitcoin Core developers(%1-bit)AddressBookPageDouble-click to edit address or labelDobbeltklik for at redigere adresse eller mærkatCreate a new addressOpret en ny adresse&New&NyCopy the currently selected address to the system clipboardKopiér den valgte adresse til systemets udklipsholder&Copy&KopiérC&lose&Copy AddressKopiér adresseDelete the currently selected address from the listSlet den markerede adresse fra listenExport the data in the current tab to a fileEksportér den aktuelle visning til en fil&ExportEksporter&DeleteSletChoose the address to send coins toChoose the address to receive coins withC&hooseSending addressesAfsendelsesadresserReceiving addressesModtagelsesadresserThese are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins.Disse er dine Bitcoin-adresser for at sende betalinger. Tjek altid beløb og modtageradresse, inden du sender bitcoins.These are your Bitcoin addresses for receiving payments. It is recommended to use a new receiving address for each transaction.Copy &LabelKopiér mærkat&EditRedigérExport Address ListComma separated file (*.csv)Kommasepareret fil (*.csv)Exporting FailedThere was an error trying to save the address list to %1.AddressTableModelLabelMærkatAddressAdresse(no label)(ingen mærkat)AskPassphraseDialogPassphrase DialogAdgangskodedialogEnter passphraseIndtast adgangskodeNew passphraseNy adgangskodeRepeat new passphraseGentag ny adgangskodeEnter the new passphrase to the wallet.<br/>Please use a passphrase of <b>10 or more random characters</b>, or <b>eight or more words</b>.Indtast den nye adgangskode til tegnebogen.<br/>Brug venligst en adgangskode på <b>10 eller flere tilfældige tegn</b> eller <b>otte eller flere ord</b>.Encrypt walletKryptér tegnebogThis operation needs your wallet passphrase to unlock the wallet.Denne funktion har brug for din tegnebogs adgangskode for at låse tegnebogen op.Unlock walletLås tegnebog opThis operation needs your wallet passphrase to decrypt the wallet.Denne funktion har brug for din tegnebogs adgangskode for at dekryptere tegnebogen.Decrypt walletDekryptér tegnebogChange passphraseSkift adgangskodeEnter the old and new passphrase to the wallet.Indtast den gamle og den nye adgangskode til tegnebogen.Confirm wallet encryptionBekræft tegnebogskrypteringWarning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR BITCOINS</b>!Advarsel: Hvis du krypterer din tegnebog og mister din adgangskode, vil du <b>MISTE ALLE DINE BITCOINS</b>!Are you sure you wish to encrypt your wallet?Er du sikker på, at du ønsker at kryptere din tegnebog?IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet.VIGTIGT: Enhver tidligere sikkerhedskopi, som du har lavet af tegnebogsfilen, bør blive erstattet af den nyligt genererede, krypterede tegnebogsfil. Af sikkerhedsmæssige årsager vil tidligere sikkerhedskopier af den ikke-krypterede tegnebogsfil blive ubrugelig i det øjeblik, du starter med at anvende den nye, krypterede tegnebog.Warning: The Caps Lock key is on!Advarsel: Caps Lock-tasten er aktiveret!Wallet encryptedTegnebog krypteretBitcoin will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer.Bitcoin vil nu lukke for at gennemføre krypteringsprocessen. Husk på, at kryptering af din tegnebog vil ikke beskytte dine bitcoins fuldt ud mod at blive stjålet af malware på din computer.Wallet encryption failedTegnebogskryptering mislykkedesWallet encryption failed due to an internal error. Your wallet was not encrypted.Tegnebogskryptering mislykkedes på grund af en intern fejl. Din tegnebog blev ikke krypteret.The supplied passphrases do not match.De angivne adgangskoder stemmer ikke overens.Wallet unlock failedTegnebogsoplåsning mislykkedesThe passphrase entered for the wallet decryption was incorrect.Den angivne adgangskode for tegnebogsdekrypteringen er forkert.Wallet decryption failedTegnebogsdekryptering mislykkedesWallet passphrase was successfully changed.Tegnebogens adgangskode blev ændret.BitcoinGUISign &message...Underskriv besked …Synchronizing with network...Synkroniserer med netværk …&OverviewOversigtNodeShow general overview of walletVis generel oversigt over tegnebog&TransactionsTransaktionerBrowse transaction historyGennemse transaktionshistorikE&xitLukQuit applicationAfslut programShow information about BitcoinVis informationer om BitcoinAbout &QtOm QtShow information about QtVis informationer om Qt&Options...Indstillinger …&Encrypt Wallet...Kryptér tegnebog …&Backup Wallet...Sikkerhedskopiér tegnebog …&Change Passphrase...Skift adgangskode …&Sending addresses...&Afsendelsesadresser...&Receiving addresses...&Modtagelsesadresser...Open &URI...Importing blocks from disk...Importerer blokke fra disken...Reindexing blocks on disk...Genindekserer blokke på disken...Send coins to a Bitcoin addressSend bitcoins til en Bitcoin-adresseModify configuration options for BitcoinRedigér konfigurationsindstillinger for BitcoinBackup wallet to another locationLav sikkerhedskopi af tegnebogen til et andet stedChange the passphrase used for wallet encryptionSkift adgangskode anvendt til tegnebogskryptering&Debug windowFejlsøgningsvindueOpen debugging and diagnostic consoleÅbn fejlsøgnings- og diagnosticeringskonsollen&Verify message...Verificér besked …BitcoinBitcoinWalletTegnebog&SendSend&ReceiveModtag&Show / HideVis / skjulShow or hide the main WindowVis eller skjul hovedvinduetEncrypt the private keys that belong to your walletKrypter de private nøgler, der hører til din tegnebogSign messages with your Bitcoin addresses to prove you own themUnderskriv beskeder med dine Bitcoin-adresser for at bevise, at de tilhører digVerify messages to ensure they were signed with specified Bitcoin addressesVerificér beskeder for at sikre, at de er underskrevet med de(n) angivne Bitcoin-adresse(r)&FileFil&SettingsOpsætning&HelpHjælpTabs toolbarFaneværktøjslinje[testnet][testnetværk]Bitcoin CoreBitcoin CoreRequest payments (generates QR codes and bitcoin: URIs)&About Bitcoin CoreShow the list of used sending addresses and labelsShow the list of used receiving addresses and labelsOpen a bitcoin: URI or payment request&Command-line optionsShow the Bitcoin Core help message to get a list with possible Bitcoin command-line optionsBitcoin clientBitcoin-klient%n active connection(s) to Bitcoin network%n aktiv forbindelse til Bitcoin-netværket%n aktive forbindelser til Bitcoin-netværketNo block source available...Ingen blokkilde tilgængelig...Processed %1 of %2 (estimated) blocks of transaction history.Behandlet %1 ud af %2 (estimeret) blokke af transaktionshistorikken.Processed %1 blocks of transaction history.Behandlet %1 blokke af transaktionshistorikken.%n hour(s)%n time%n timer%n day(s)%n dag%n dage%n week(s)%n uge%n uger%1 and %2%n year(s)%1 behind%1 bagudLast received block was generated %1 ago.Senest modtagne blok blev genereret for %1 siden.Transactions after this will not yet be visible.Transaktioner herefter vil endnu ikke være synlige.ErrorFejlWarningAdvarselInformationInformationUp to dateOpdateretCatching up...Indhenter …Sent transactionAfsendt transaktionIncoming transactionIndgående transaktionDate: %1
Amount: %2
Type: %3
Address: %4
Dato: %1
Beløb: %2
Type: %3
Adresse: %4
Wallet is <b>encrypted</b> and currently <b>unlocked</b>Tegnebog er <b>krypteret</b> og i øjeblikket <b>ulåst</b>Wallet is <b>encrypted</b> and currently <b>locked</b>Tegnebog er <b>krypteret</b> og i øjeblikket <b>låst</b>A fatal error occurred. Bitcoin can no longer continue safely and will quit.Der opstod en fatal fejl. Bitcoin kan ikke længere fortsætte sikkert og vil afslutte.ClientModelNetwork AlertNetværksadvarselCoinControlDialogCoin Control Address SelectionQuantity:Bytes:Amount:Beløb:Priority:Fee:Low Output:After Fee:Change:(un)select allTree modeList modeAmountBeløbAddressAdresseDateDatoConfirmationsConfirmedBekræftetPriorityCopy addressKopier adresseCopy labelKopier mærkatCopy amountKopier beløbCopy transaction IDKopier transaktionens IDLock unspentUnlock unspentCopy quantityCopy feeCopy after feeCopy bytesCopy priorityCopy low outputCopy changehighesthigherhighmedium-highmediumlow-mediumlowlowerlowest(%1 locked)noneDustyesnoThis label turns red, if the transaction size is greater than 1000 bytes.This means a fee of at least %1 per kB is required.Can vary +/- 1 byte per input.Transactions with higher priority are more likely to get included into a block.This label turns red, if the priority is smaller than "medium".This label turns red, if any recipient receives an amount smaller than %1.This means a fee of at least %1 is required.Amounts below 0.546 times the minimum relay fee are shown as dust.This label turns red, if the change is smaller than %1.(no label)(ingen mærkat)change from %1 (%2)(change)EditAddressDialogEdit AddressRedigér adresse&LabelMærkatThe label associated with this address list entryThe address associated with this address list entry. This can only be modified for sending addresses.&AddressAdresseNew receiving addressNy modtagelsesadresseNew sending addressNy afsendelsesadresseEdit receiving addressRedigér modtagelsesadresseEdit sending addressRedigér afsendelsesadresseThe entered address "%1" is already in the address book.Den indtastede adresse "%1" er allerede i adressebogen.The entered address "%1" is not a valid Bitcoin address.Den indtastede adresse "%1" er ikke en gyldig Bitcoin-adresse.Could not unlock wallet.Kunne ikke låse tegnebog op.New key generation failed.Ny nøglegenerering mislykkedes.FreespaceCheckerA new data directory will be created.namenavnDirectory already exists. Add %1 if you intend to create a new directory here.Path already exists, and is not a directory.Cannot create data directory here.HelpMessageDialogBitcoin Core - Command-line optionsBitcoin CoreBitcoin CoreversionversionUsage:Anvendelse:command-line optionskommandolinjetilvalgUI optionsBrugergrænsefladeindstillingerSet language, for example "de_DE" (default: system locale)Angiv sprog, f.eks "de_DE" (standard: systemlokalitet)Start minimizedStart minimeretSet SSL root certificates for payment request (default: -system-)Show splash screen on startup (default: 1)Vis opstartsbillede ved start (standard: 1)Choose data directory on startup (default: 0)IntroWelcomeVelkommenWelcome to Bitcoin Core.As this is the first time the program is launched, you can choose where Bitcoin Core will store its data.Bitcoin Core will download and store a copy of the Bitcoin block chain. At least %1GB of data will be stored in this directory, and it will grow over time. The wallet will also be stored in this directory.Use the default data directoryUse a custom data directory:BitcoinBitcoinError: Specified data directory "%1" can not be created.ErrorFejlGB of free space available(of %1GB needed)OpenURIDialogOpen URIOpen payment request from URI or fileURI:Select payment request fileSelect payment request file to openOptionsDialogOptionsIndstillinger&MainGenereltOptional transaction fee per kB that helps make sure your transactions are processed quickly. Most transactions are 1 kB.Valgfrit transaktionsgebyr pr. kB, der hjælper dine transaktioner med at blive behandlet hurtigt. De fleste transaktioner er på 1 kB.Pay transaction &feeBetal transaktionsgebyrAutomatically start Bitcoin after logging in to the system.Start Bitcoin automatisk, når der logges ind på systemet.&Start Bitcoin on system loginStart Bitcoin ved systemloginSize of &database cacheMBNumber of script &verification threadsConnect to the Bitcoin network through a SOCKS proxy.&Connect through SOCKS proxy (default proxy):IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1)Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |.Third party transaction URLsActive command-line options that override above options:Reset all client options to default.Nulstil alle klientindstillinger til deres standard.&Reset OptionsNulstil indstillinger&NetworkNetværk(0 = auto, <0 = leave that many cores free)W&alletExpertEnable coin &control featuresIf you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed.&Spend unconfirmed changeAutomatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled.Åbn automatisk Bitcoin-klientens port på routeren. Dette virker kun, når din router understøtter UPnP, og UPnP er aktiveret.Map port using &UPnPKonfigurér port vha. UPnPProxy &IP:Proxy-IP:&Port:Port:Port of the proxy (e.g. 9050)Port for proxyen (fx 9050)SOCKS &Version:SOCKS-versionSOCKS version of the proxy (e.g. 5)SOCKS-version for proxyen (fx 5)&WindowVindueShow only a tray icon after minimizing the window.Vis kun et statusikon efter minimering af vinduet.&Minimize to the tray instead of the taskbarMinimer til statusfeltet i stedet for proceslinjenMinimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Quit in the menu.Minimer i stedet for at afslutte programmet, når vinduet lukkes. Når denne indstilling er valgt, vil programmet kun blive lukket, når du har valgt Afslut i menuen.M&inimize on closeMinimer ved lukning&DisplayVisningUser Interface &language:Brugergrænsefladesprog:The user interface language can be set here. This setting will take effect after restarting Bitcoin.Brugergrænsefladesproget kan angives her. Denne indstilling træder først i kraft, når Bitcoin genstartes.&Unit to show amounts in:Enhed at vise beløb i:Choose the default subdivision unit to show in the interface and when sending coins.Vælg den standard underopdelingsenhed, som skal vises i brugergrænsefladen og ved afsendelse af bitcoins.Whether to show Bitcoin addresses in the transaction list or not.Afgør hvorvidt Bitcoin-adresser skal vises i transaktionslisten eller ej.&Display addresses in transaction listVis adresser i transaktionslisteWhether to show coin control features or not.&OKOK&CancelAnnullerdefaultstandardnoneConfirm options resetBekræft nulstilling af indstillingerClient restart required to activate changes.Client will be shutdown, do you want to proceed?This change would require a client restart.The supplied proxy address is invalid.Ugyldig proxy-adresseOverviewPageFormFormularThe displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet.Den viste information kan være forældet. Din tegnebog synkroniserer automatisk med Bitcoin-netværket, når en forbindelse etableres, men denne proces er ikke gennemført endnu.WalletTegnebogAvailable:Your current spendable balanceDin nuværende tilgængelige saldoPending:Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balanceTotal transaktioner, som ikke er blevet bekræftet endnu, og som ikke endnu er en del af den nuværende saldoImmature:Umodne:Mined balance that has not yet maturedUdvunden saldo, som endnu ikke er modnetTotal:Total:Your current total balanceDin nuværende totale saldo<b>Recent transactions</b><b>Nyeste transaktioner</b>out of syncikke synkroniseretPaymentServerURI handlingURI-håndteringURI can not be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters.URI kan ikke fortolkes! Dette kan skyldes en ugyldig Bitcoin-adresse eller misdannede URI-parametre.Requested payment amount of %1 is too small (considered dust).Payment request errorFejl i betalingsforespørgelseCannot start bitcoin: click-to-pay handlerKan ikke starte bitcoin: click-to-pay-håndteringNet manager warningYour active proxy doesn't support SOCKS5, which is required for payment requests via proxy.Payment request fetch URL is invalid: %1Payment request file handlingPayment request file can not be read or processed! This can be caused by an invalid payment request file.Unverified payment requests to custom payment scripts are unsupported.Refund from %1Tilbagebetaling fra %1Error communicating with %1: %2Payment request can not be parsed or processed!Bad response from server %1Payment acknowledgedNetwork request errorQObjectBitcoinBitcoinError: Specified data directory "%1" does not exist.Error: Cannot parse configuration file: %1. Only use key=value syntax.Error: Invalid combination of -regtest and -testnet.Bitcoin Core didn't yet exit safely...Enter a Bitcoin address (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)Indtast en Bitcoin-adresse (f.eks. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)QRImageWidget&Save Image...&Gem foto...&Copy Image&Kopiér fotoSave QR CodeGem QR-kodePNG Image (*.png)RPCConsoleClient nameKlientnavnN/AN/AClient versionKlientversion&InformationInformationDebug windowGeneralUsing OpenSSL versionAnvender OpenSSL-versionStartup timeOpstartstidspunktNetworkNetværkNameNavnNumber of connectionsAntal forbindelserBlock chainBlokkædeCurrent number of blocksNuværende antal blokkeEstimated total blocksEstimeret antal blokkeLast block timeTidsstempel for seneste blok&OpenÅbn&ConsoleKonsol&Network Traffic&ClearTotalsIn:Out:Ud:Build dateByggedatoDebug log fileFejlsøgningslogfilOpen the Bitcoin debug log file from the current data directory. This can take a few seconds for large log files.Åbn Bitcoin-fejlsøgningslogfilen fra det nuværende datakatalog. Dette kan tage nogle få sekunder for en store logfiler.Clear consoleRyd konsolWelcome to the Bitcoin RPC console.Velkommen til Bitcoin RPC-konsollen.Use up and down arrows to navigate history, and <b>Ctrl-L</b> to clear screen.Brug op- og ned-piletasterne til at navigere i historikken og <b>Ctrl-L</b> til at rydde skærmen.Type <b>help</b> for an overview of available commands.Tast <b>help</b> for en oversigt over de tilgængelige kommandoer.%1 B%1 B%1 KB%1 KB%1 MB%1 MB%1 GB%1 GB%1 m%1 m%1 h%1 t%1 h %2 m%1 t %2 mReceiveCoinsDialog&Amount:&Mængde:&Label:Mærkat:&Message:&Besked:Reuse one of the previously used receiving addresses. Reusing addresses has security and privacy issues. Do not use this unless re-generating a payment request made before.R&euse an existing receiving address (not recommended)An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network.An optional label to associate with the new receiving address.Use this form to request payments. All fields are <b>optional</b>.An optional amount to request. Leave this empty or zero to not request a specific amount.Clear all fields of the form.Ryd alle fælter af formen.ClearRydRequested payments history&Request payment&Anmod betalingShow the selected request (does the same as double clicking an entry)ShowRemove the selected entries from the listRemoveCopy labelKopier mærkatCopy messageCopy amountKopier beløbReceiveRequestDialogQR CodeQR KodeCopy &URIKopiér &URLCopy &AddressKopiér &Adresse&Save Image...&Gem foto...Request payment to %1Payment informationBetalingsinformationURIURIAddressAdresseAmountBeløbLabelMærkatMessageBeskedResulting URI too long, try to reduce the text for label / message.Resulterende URI var for lang; prøv at forkorte teksten til mærkaten/beskeden.Error encoding URI into QR Code.Fejl ved kodning fra URI til QR-kodeRecentRequestsTableModelDateDatoLabelMærkatMessageBeskedAmountBeløb(no label)(ingen mærkat)(no message)(no amount)SendCoinsDialogSend CoinsSend bitcoinsCoin Control FeaturesInputs...automatically selectedInsufficient funds!Quantity:Bytes:Amount:Beløb:Priority:Fee:Low Output:After Fee:Change:If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address.Custom change addressSend to multiple recipients at onceSend til flere modtagere på en gangAdd &RecipientTilføj modtagerClear all fields of the form.Ryd alle fælter af formen.Clear &AllRyd alleBalance:Saldo:Confirm the send actionBekræft afsendelsenS&endAfsendConfirm send coinsBekræft afsendelse af bitcoins%1 to %2Copy quantityCopy amountKopier beløbCopy feeCopy after feeCopy bytesCopy priorityCopy low outputCopy changeTotal Amount %1 (= %2)orThe recipient address is not valid, please recheck.Modtagerens adresse er ikke gyldig. Tjek venligst adressen igen.The amount to pay must be larger than 0.Beløbet til betaling skal være større end 0.The amount exceeds your balance.Beløbet overstiger din saldo.The total exceeds your balance when the %1 transaction fee is included.Totalen overstiger din saldo, når transaktionsgebyret på %1 er inkluderet.Duplicate address found, can only send to each address once per send operation.Duplikeret adresse fundet. Du kan kun sende til hver adresse én gang pr. afsendelse.Transaction creation failed!The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.Warning: Invalid Bitcoin address(no label)(ingen mærkat)Warning: Unknown change addressAre you sure you want to send?Er du sikker på at du vil sende?added as transaction feetilføjet som transaktionsgebyrPayment request expiredBetalingsforespørgsel udløbInvalid payment address %1SendCoinsEntryA&mount:Beløb:Pay &To:Betal til:The address to send the payment to (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)Bitcoin-adressen som betalingen skal sendes til (f.eks. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)Enter a label for this address to add it to your address bookIndtast en mærkat for denne adresse for at føje den til din adressebog&Label:Mærkat:Choose previously used addressThis is a normal payment.Alt+AAlt+APaste address from clipboardIndsæt adresse fra udklipsholderenAlt+PAlt+PRemove this entryMessage:Besked:This is a verified payment request.Enter a label for this address to add it to the list of used addressesA message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network.This is an unverified payment request.Pay To:Memo:ShutdownWindowBitcoin Core is shutting down...Do not shut down the computer until this window disappears.SignVerifyMessageDialogSignatures - Sign / Verify a MessageSignature - Underskriv/verificér en besked&Sign MessageUnderskriv beskedYou can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to.Du kan underskrive beskeder med dine Bitcoin-adresser for at bevise, at de tilhører dig. Pas på ikke at underskrive noget vagt, da phisingangreb kan narre dig til at overdrage din identitet. Underskriv kun fuldt detaljerede udsagn, du er enig i.The address to sign the message with (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)Bitcoin-adressen som beskeden skal underskrives med (f.eks. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)Choose previously used addressAlt+AAlt+APaste address from clipboardIndsæt adresse fra udklipsholderenAlt+PAlt+PEnter the message you want to sign hereIndtast beskeden, du ønsker at underskriveSignatureUnderskriftCopy the current signature to the system clipboardKopier den nuværende underskrift til systemets udklipsholderSign the message to prove you own this Bitcoin addressUnderskriv denne besked for at bevise, at Bitcoin-adressen tilhører digSign &MessageUnderskriv beskedReset all sign message fieldsNulstil alle "underskriv besked"-felterClear &AllRyd alle&Verify MessageVerificér beskedEnter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack.Indtast den underskrevne adresse, beskeden (inkluder linjeskift, mellemrum mv. nøjagtigt, som de fremgår) og underskriften for at verificére beskeden. Vær forsigtig med ikke at lægge mere i underskriften end besked selv, så du undgår at blive narret af et man-in-the-middle-angreb.The address the message was signed with (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)Bitcoin-adressen som beskeden er underskrevet med (f.eks. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)Verify the message to ensure it was signed with the specified Bitcoin addressVerificér beskeden for at sikre, at den er underskrevet med den angivne Bitcoin-adresseVerify &MessageVerificér beskedReset all verify message fieldsNulstil alle "verificér besked"-felterEnter a Bitcoin address (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)Indtast en Bitcoin-adresse (f.eks. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L)Click "Sign Message" to generate signatureKlik "Underskriv besked" for at generere underskriftenThe entered address is invalid.Den indtastede adresse er ugyldig.Please check the address and try again.Tjek venligst adressen, og forsøg igen.The entered address does not refer to a key.Den indtastede adresse henviser ikke til en nøgle.Wallet unlock was cancelled.Tegnebogsoplåsning annulleret.Private key for the entered address is not available.Den private nøgle for den indtastede adresse er ikke tilgængelig.Message signing failed.Underskrivning af besked mislykkedes.Message signed.Besked underskrevet.The signature could not be decoded.Underskriften kunne ikke afkodes.Please check the signature and try again.Tjek venligst underskriften, og forsøg igen.The signature did not match the message digest.Underskriften matcher ikke beskedens indhold.Message verification failed.Verificéring af besked mislykkedes.Message verified.Besked verificéret.SplashScreenBitcoin CoreBitcoin CoreThe Bitcoin Core developers[testnet][testnet]TrafficGraphWidgetKB/sKB/sTransactionDescOpen until %1Åben indtil %1conflicted%1/offline%1/offline%1/unconfirmed%1/ubekræftet%1 confirmations%1 bekræftelserStatusStatus, broadcast through %n node(s), transmitteret igennem %n knude(r), transmitteret igennem %n knude(r)DateDatoSourceKildeGeneratedGenereretFromFraToTilown addressegen adresselabelmærkatCreditKreditmatures in %n more block(s)modner efter yderligere %n blok(ke)modner efter yderligere %n blok(ke)not acceptedikke accepteretDebitDebetTransaction feeTransaktionsgebyrNet amountNettobeløbMessageBeskedCommentKommentarTransaction IDTransaktionens IDMerchantGenerated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.Debug informationFejlsøgningsinformationTransactionTransaktionInputsInputAmountBeløbtruesandfalsefalsk, has not been successfully broadcast yet, er ikke blevet transmitteret endnuOpen for %n more block(s)Åbn yderligere %n blokÅbn yderligere %n blokkeunknownukendtTransactionDescDialogTransaction detailsTransaktionsdetaljerThis pane shows a detailed description of the transactionDenne rude viser en detaljeret beskrivelse af transaktionenTransactionTableModelDateDatoTypeTypeAddressAdresseAmountBeløbImmature (%1 confirmations, will be available after %2)Open for %n more block(s)Åbn yderligere %n blokÅbn yderligere %n blokkeOpen until %1Åben indtil %1Confirmed (%1 confirmations)Bekræftet (%1 bekræftelser)This block was not received by any other nodes and will probably not be accepted!Denne blok blev ikke modtaget af nogen andre knuder og vil formentlig ikke blive accepteret!Generated but not acceptedGenereret, men ikke accepteretOfflineUnconfirmedConfirming (%1 of %2 recommended confirmations)ConflictedReceived withModtaget medReceived fromModtaget fraSent toSendt tilPayment to yourselfBetaling til dig selvMinedUdvundne(n/a)(n/a)Transaction status. Hover over this field to show number of confirmations.Transaktionsstatus. Hold musen over dette felt for at vise antallet af bekræftelser.Date and time that the transaction was received.Dato og klokkeslæt for modtagelse af transaktionen.Type of transaction.Transaktionstype.Destination address of transaction.Destinationsadresse for transaktion.Amount removed from or added to balance.Beløb trukket fra eller tilføjet balance.TransactionViewAllAlleTodayI dagThis weekDenne ugeThis monthDenne månedLast monthSidste månedThis yearDette årRange...Interval …Received withModtaget medSent toSendt tilTo yourselfTil dig selvMinedUdvundneOtherAndetEnter address or label to searchIndtast adresse eller mærkat for at søgeMin amountMinimumsbeløbCopy addressKopiér adresseCopy labelKopiér mærkatCopy amountKopiér beløbCopy transaction IDKopier transaktionens IDEdit labelRedigér mærkatShow transaction detailsVis transaktionsdetaljerExport Transaction HistoryExporting FailedThere was an error trying to save the transaction history to %1.Exporting SuccessfulThe transaction history was successfully saved to %1.Comma separated file (*.csv)Kommasepareret fil (*.csv)ConfirmedBekræftetDateDatoTypeTypeLabelMærkatAddressAdresseAmountBeløbIDIDRange:Interval:totilWalletFrameNo wallet has been loaded.WalletModelSend CoinsSend bitcoinsWalletView&ExportEksporterExport the data in the current tab to a fileEksportér den aktuelle visning til en filBackup WalletSikkerhedskopier tegnebogWallet Data (*.dat)Tegnebogsdata (*.dat)Backup FailedForetagelse af sikkerhedskopi fejledeThere was an error trying to save the wallet data to %1.The wallet data was successfully saved to %1.Backup SuccessfulSikkerhedskopieret problemfribitcoin-coreUsage:Anvendelse:List commandsListe over kommandoerGet help for a commandFå hjælp til en kommandoOptions:Indstillinger:Specify configuration file (default: bitcoin.conf)Angiv konfigurationsfil (standard: bitcoin.conf)Specify pid file (default: bitcoind.pid)Angiv pid-fil (default: bitcoind.pid)Specify data directoryAngiv datakatalogListen for connections on <port> (default: 8333 or testnet: 18333)Lyt til forbindelser på <port> (standard: 8333 eller testnetværk: 18333)Maintain at most <n> connections to peers (default: 125)Oprethold højest <n> forbindelser til andre i netværket (standard: 125)Connect to a node to retrieve peer addresses, and disconnectForbind til en knude for at modtage adresser på andre knuder, og afbryd derefterSpecify your own public addressAngiv din egen offentlige adresseThreshold for disconnecting misbehaving peers (default: 100)Grænse for afbrydelse til dårlige forbindelser (standard: 100)Number of seconds to keep misbehaving peers from reconnecting (default: 86400)Antal sekunder dårlige forbindelser skal vente før reetablering (standard: 86400)An error occurred while setting up the RPC port %u for listening on IPv4: %sDer opstod en fejl ved angivelse af RPC-porten %u til at lytte på IPv4: %sListen for JSON-RPC connections on <port> (default: 8332 or testnet: 18332)Lyt til JSON-RPC-forbindelser på <port> (standard: 8332 eller testnetværk: 18332)Accept command line and JSON-RPC commandsAcceptér kommandolinje- og JSON-RPC-kommandoerBitcoin Core RPC client versionRun in the background as a daemon and accept commandsKør i baggrunden som en service, og acceptér kommandoerUse the test networkBrug testnetværketAccept connections from outside (default: 1 if no -proxy or -connect)Accepter forbindelser udefra (standard: 1 hvis hverken -proxy eller -connect)%s, you must set a rpcpassword in the configuration file:
%s
It is recommended you use the following random password:
rpcuser=bitcoinrpc
rpcpassword=%s
(you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions.
It is also recommended to set alertnotify so you are notified of problems;
for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com
%s, du skal angive en RPC-adgangskode i konfigurationsfilen:
%s
Det anbefales, at du bruger nedenstående, tilfældige adgangskode:
rpcuser=bitcoinrpc
rpcpassword=%s
(du behøver ikke huske denne adgangskode)
Brugernavnet og adgangskode MÅ IKKE være det samme.
Hvis filen ikke eksisterer, opret den og giv ingen andre end ejeren læserettighed.
Det anbefales også at angive alertnotify, så du påmindes om problemer;
f.eks.: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com
Acceptable ciphers (default: TLSv1.2+HIGH:TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH)An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %sDer opstod en fejl ved angivelse af RPC-porten %u til at lytte på IPv6, falder tilbage til IPv4: %sBind to given address and always listen on it. Use [host]:port notation for IPv6Tildel til den givne adresse og lyt altid på den. Brug [vært]:port-notation for IPv6Continuously rate-limit free transactions to <n>*1000 bytes per minute (default:15)Enter regression test mode, which uses a special chain in which blocks can be solved instantly. This is intended for regression testing tools and app development.Enter regression test mode, which uses a special chain in which blocks can be solved instantly.Error: Listening for incoming connections failed (listen returned error %d)Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here.Fejl: Transaktionen blev afvist. Dette kan ske, hvis nogle af dine bitcoins i din tegnebog allerede er brugt, som hvis du brugte en kopi af wallet.dat og dine bitcoins er blevet brugt i kopien, men ikke er markeret som brugt her.Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds!Fejl: Denne transaktion kræver et transaktionsgebyr på minimum %s pga. dens størrelse, kompleksitet eller anvendelse af nyligt modtagne bitcoins!Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)Udfør kommando, når en transaktion i tegnebogen ændres (%s i kommandoen erstattes med TxID)Fees smaller than this are considered zero fee (for transaction creation) (default:Flush database activity from memory pool to disk log every <n> megabytes (default: 100)How thorough the block verification of -checkblocks is (0-4, default: 3)In this mode -genproclimit controls how many blocks are generated immediately.Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)Set the processor limit for when generation is on (-1 = unlimited, default: -1)This is a pre-release test build - use at your own risk - do not use for mining or merchant applicationsDette er en foreløbig testudgivelse - brug på eget ansvar - brug ikke til udvinding eller handelsprogrammerUnable to bind to %s on this computer. Bitcoin Core is probably already running.Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: -proxy)Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction.Advarsel: -paytxfee er sat meget højt! Dette er det gebyr du vil betale, hvis du sender en transaktion.Warning: Please check that your computer's date and time are correct! If your clock is wrong Bitcoin will not work properly.Advarsel: Undersøg venligst, at din computers dato og klokkeslæt er korrekt indstillet! Hvis der er fejl i disse, vil Bitcoin ikke fungere korrekt.Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues.Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade.Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect.Advarsel: fejl under læsning af wallet.dat! Alle nøgler blev læst korrekt, men transaktionsdata eller adressebogsposter kan mangle eller være forkerte.Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup.Advarsel: wallet.dat ødelagt, data reddet! Oprindelig wallet.net gemt som wallet.{timestamp}.bak i %s; hvis din saldo eller dine transaktioner er forkert, bør du genskabe fra en sikkerhedskopi.(default: 1)(default: wallet.dat)<category> can be:Attempt to recover private keys from a corrupt wallet.datForsøg at genskabe private nøgler fra ødelagt wallet.datBitcoin Core DaemonBlock creation options:Blokoprettelsestilvalg:Clear list of wallet transactions (diagnostic tool; implies -rescan)Connect only to the specified node(s)Tilslut kun til de(n) angivne knude(r)Connect through SOCKS proxyConnect to JSON-RPC on <port> (default: 8332 or testnet: 18332)Connection options:Corrupted block database detectedØdelagt blokdatabase opdagetDebugging/Testing options:Disable safemode, override a real safe mode event (default: 0)Discover own IP address (default: 1 when listening and no -externalip)Find egen IP-adresse (standard: 1 når lytter og ingen -externalip)Do not load the wallet and disable wallet RPC callsDo you want to rebuild the block database now?Ønsker du at genbygge blokdatabasen nu?Error initializing block databaseKlargøring af blokdatabase mislykkedesError initializing wallet database environment %s!Klargøring af tegnebogsdatabasemiljøet %s mislykkedes!Error loading block databaseIndlæsning af blokdatabase mislykkedesError opening block databaseÅbning af blokdatabase mislykkedesError: Disk space is low!Fejl: Mangel på ledig diskplads!Error: Wallet locked, unable to create transaction!Fejl: Tegnebog låst, kan ikke oprette transaktion!Error: system error: Fejl: systemfejl: Failed to listen on any port. Use -listen=0 if you want this.Lytning på enhver port mislykkedes. Brug -listen=0, hvis du ønsker dette.Failed to read block infoLæsning af blokinformation mislykkedesFailed to read blockLæsning af blok mislykkedesFailed to sync block indexSynkronisering af blokindeks mislykkedesFailed to write block indexSkrivning af blokindeks mislykkedesFailed to write block infoSkrivning af blokinformation mislykkedesFailed to write blockSkrivning af blok mislykkedesFailed to write file infoSkriving af filinformation mislykkedesFailed to write to coin databaseSkrivning af bitcoin-database mislykkedesFailed to write transaction indexSkrivning af transaktionsindeks mislykkedesFailed to write undo dataSkrivning af genskabelsesdata mislykkedesFee per kB to add to transactions you sendFees smaller than this are considered zero fee (for relaying) (default:Find peers using DNS lookup (default: 1 unless -connect)Find ligeværdige ved DNS-opslag (standard: 1 hvis ikke -connect)Force safe mode (default: 0)Generate coins (default: 0)Generer bitcoins (standard: 0)How many blocks to check at startup (default: 288, 0 = all)Antal blokke som tjekkes ved opstart (0=alle, standard: 288)If <category> is not supplied, output all debugging information.Importing...Incorrect or no genesis block found. Wrong datadir for network?Invalid -onion address: '%s'Not enough file descriptors available.For få tilgængelige fildeskriptorer.Prepend debug output with timestamp (default: 1)RPC client options:Rebuild block chain index from current blk000??.dat filesGenbyg blokkædeindeks fra nuværende blk000??.dat filerSelect SOCKS version for -proxy (4 or 5, default: 5)Set database cache size in megabytes (%d to %d, default: %d)Set maximum block size in bytes (default: %d)Set the number of threads to service RPC calls (default: 4)Angiv antallet af tråde til at håndtere RPC-kald (standard: 4)Specify wallet file (within data directory)Spend unconfirmed change when sending transactions (default: 1)This is intended for regression testing tools and app development.Usage (deprecated, use bitcoin-cli):Verifying blocks...Verificerer blokke...Verifying wallet...Verificerer tegnebog...Wait for RPC server to startWallet %s resides outside data directory %sWallet options:Warning: Deprecated argument -debugnet ignored, use -debug=netYou need to rebuild the database using -reindex to change -txindexImports blocks from external blk000??.dat fileImporterer blokke fra ekstern blk000??.dat filCannot obtain a lock on data directory %s. Bitcoin Core is probably already running.Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message)Output debugging information (default: 0, supplying <category> is optional)Set maximum size of high-priority/low-fee transactions in bytes (default: %d)InformationInformationInvalid amount for -minrelaytxfee=<amount>: '%s'Ugyldigt beløb til -minrelaytxfee=<beløb>:'%s'Invalid amount for -mintxfee=<amount>: '%s'Ugyldigt beløb til -mintxfee=<beløb>:'%s'Limit size of signature cache to <n> entries (default: 50000)Log transaction priority and fee per kB when mining blocks (default: 0)Maintain a full transaction index (default: 0)Vedligehold et komplet transaktionsindeks (standard: 0)Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000)Maksimum for modtagelsesbuffer pr. forbindelse, <n>*1000 bytes (standard: 5000)Maximum per-connection send buffer, <n>*1000 bytes (default: 1000)Maksimum for afsendelsesbuffer pr. forbindelse, <n>*1000 bytes (standard: 1000)Only accept block chain matching built-in checkpoints (default: 1)Accepter kun blokkæde, som matcher indbyggede kontrolposter (standard: 1)Only connect to nodes in network <net> (IPv4, IPv6 or Tor)Tilslut kun til knuder i netværk <net> (IPv4, IPv6 eller Tor)Print block on startup, if found in block indexPrint block tree on startup (default: 0)RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions)RPC server options:Randomly drop 1 of every <n> network messagesRandomly fuzz 1 of every <n> network messagesRun a thread to flush wallet periodically (default: 1)SSL options: (see the Bitcoin Wiki for SSL setup instructions)SSL-indstillinger: (se Bitcoin Wiki for SSL-opsætningsinstruktioner)Send command to Bitcoin CoreSend trace/debug info to console instead of debug.log fileSend sporings-/fejlsøgningsinformation til konsollen i stedet for debug.log filenSet minimum block size in bytes (default: 0)Angiv minimumsblokstørrelse i bytes (standard: 0)Sets the DB_PRIVATE flag in the wallet db environment (default: 1)Show all debugging options (usage: --help -help-debug)Show benchmark information (default: 0)Shrink debug.log file on client startup (default: 1 when no -debug)Formindsk debug.log filen ved klientopstart (standard: 1 hvis ikke -debug)Signing transaction failedUnderskrift af transaktion mislykkedesSpecify connection timeout in milliseconds (default: 5000)Angiv tilslutningstimeout i millisekunder (standard: 5000)Start Bitcoin Core DaemonSystem error: Systemfejl: Transaction amount too smallTransaktionsbeløb er for lavtTransaction amounts must be positiveTransaktionsbeløb skal være positiveTransaction too largeTransaktionen er for storUse UPnP to map the listening port (default: 0)Forsøg at bruge UPnP til at konfigurere den lyttende port (standard: 0)Use UPnP to map the listening port (default: 1 when listening)Forsøg at bruge UPnP til at konfigurere den lyttende port (standard: 1 når lytter)Username for JSON-RPC connectionsBrugernavn til JSON-RPC-forbindelserWarningAdvarselWarning: This version is obsolete, upgrade required!Advarsel: Denne version er forældet, opgradering påkrævet!Zapping all transactions from wallet...on startupversionversionwallet.dat corrupt, salvage failedwallet.dat ødelagt, redning af data mislykkedesPassword for JSON-RPC connectionsAdgangskode til JSON-RPC-forbindelserAllow JSON-RPC connections from specified IP addressTillad JSON-RPC-forbindelser fra bestemt IP-adresseSend commands to node running on <ip> (default: 127.0.0.1)Send kommandoer til knude, der kører på <ip> (standard: 127.0.0.1)Execute command when the best block changes (%s in cmd is replaced by block hash)Udfør kommando, når den bedste blok ændres (%s i kommandoen erstattes med blokhash)Upgrade wallet to latest formatOpgrader tegnebog til seneste formatSet key pool size to <n> (default: 100)Angiv nøglepoolstørrelse til <n> (standard: 100)Rescan the block chain for missing wallet transactionsGennemsøg blokkæden for manglende tegnebogstransaktionerUse OpenSSL (https) for JSON-RPC connectionsBrug OpenSSL (https) for JSON-RPC-forbindelserServer certificate file (default: server.cert)Servercertifikat-fil (standard: server.cert)Server private key (default: server.pem)Serverens private nøgle (standard: server.pem)This help messageDenne hjælpebeskedUnable to bind to %s on this computer (bind returned error %d, %s)Kunne ikke tildele %s på denne computer (bind returnerede fejl %d, %s)Allow DNS lookups for -addnode, -seednode and -connectTillad DNS-opslag for -addnode, -seednode og -connectLoading addresses...Indlæser adresser …Error loading wallet.dat: Wallet corruptedFejl ved indlæsning af wallet.dat: Tegnebog ødelagtError loading wallet.dat: Wallet requires newer version of BitcoinFejl ved indlæsning af wallet.dat: Tegnebog kræver en nyere version af BitcoinWallet needed to be rewritten: restart Bitcoin to completeDet var nødvendigt at genskrive tegnebogen: genstart Bitcoin for at gennemføreError loading wallet.datFejl ved indlæsning af wallet.datInvalid -proxy address: '%s'Ugyldig -proxy adresse: '%s'Unknown network specified in -onlynet: '%s'Ukendt netværk anført i -onlynet: '%s'Unknown -socks proxy version requested: %iUkendt -socks proxy-version: %iCannot resolve -bind address: '%s'Kan ikke finde -bind adressen: '%s'Cannot resolve -externalip address: '%s'Kan ikke finde -externalip adressen: '%s'Invalid amount for -paytxfee=<amount>: '%s'Ugyldigt beløb for -paytxfee=<amount>: '%s'Invalid amountUgyldigt beløbInsufficient fundsManglende dækningLoading block index...Indlæser blokindeks …Add a node to connect to and attempt to keep the connection openTilføj en knude til at forbinde til og forsøg at holde forbindelsen åbenLoading wallet...Indlæser tegnebog …Cannot downgrade walletKan ikke nedgradere tegnebogCannot write default addressKan ikke skrive standardadresseRescanning...Genindlæser …Done loadingIndlæsning gennemførtTo use the %s optionFor at bruge %s mulighedErrorFejlYou must set rpcpassword=<password> in the configuration file:
%s
If the file does not exist, create it with owner-readable-only file permissions.Du skal angive rpcpassword=<password> i konfigurationsfilen:
%s
Hvis filen ikke eksisterer, opret den og giv ingen andre end ejeren læserettighed.