Release Process ==================== Before every release candidate: * Update translations (ping wumpus on IRC) see [translation_process.md](https://github.com/bitcoin/bitcoin/blob/master/doc/translation_process.md#synchronising-translations). * Update manpages, see [gen-manpages.sh](https://github.com/bitcoin/bitcoin/blob/master/contrib/devtools/README.md#gen-manpagessh). Before every minor and major release: * Update [bips.md](bips.md) to account for changes since the last release. * Update version in sources (see below) * Write release notes (see below) * Update `src/chainparams.cpp` nMinimumChainWork with information from the getblockchaininfo rpc. * Update `src/chainparams.cpp` defaultAssumeValid with information from the getblockhash rpc. - The selected value must not be orphaned so it may be useful to set the value two blocks back from the tip. - Testnet should be set some tens of thousands back from the tip due to reorgs there. - This update should be reviewed with a reindex-chainstate with assumevalid=0 to catch any defect that causes rejection of blocks in the past history. Before every major release: * Update hardcoded [seeds](/contrib/seeds/README.md), see [this pull request](https://github.com/bitcoin/bitcoin/pull/7415) for an example. * Update [`BLOCK_CHAIN_SIZE`](/src/qt/intro.cpp) to the current size plus some overhead. * Update `src/chainparams.cpp` chainTxData with statistics about the transaction count and rate. ### First time / New builders If you're using the automated script (found in [contrib/gitian-build.sh](/contrib/gitian-build.sh)), then at this point you should run it with the "--setup" command. Otherwise ignore this. Check out the source code in the following directory hierarchy. cd /path/to/your/toplevel/build git clone https://github.com/bitcoin-core/gitian.sigs.git git clone https://github.com/bitcoin-core/bitcoin-detached-sigs.git git clone https://github.com/devrandom/gitian-builder.git git clone https://github.com/bitcoin/bitcoin.git ### Bitcoin maintainers/release engineers, update version in sources Update the following: - `configure.ac`: - `_CLIENT_VERSION_MAJOR` - `_CLIENT_VERSION_MINOR` - `_CLIENT_VERSION_REVISION` - Don't forget to set `_CLIENT_VERSION_IS_RELEASE` to `true` - `src/clientversion.h`: (this mirrors `configure.ac` - see issue #3539) - `CLIENT_VERSION_MAJOR` - `CLIENT_VERSION_MINOR` - `CLIENT_VERSION_REVISION` - Don't forget to set `CLIENT_VERSION_IS_RELEASE` to `true` - `doc/README.md` and `doc/README_windows.txt` - `doc/Doxyfile`: `PROJECT_NUMBER` contains the full version - `contrib/gitian-descriptors/*.yml`: usually one'd want to do this on master after branching off the release - but be sure to at least do it before a new major release Write release notes. git shortlog helps a lot, for example: git shortlog --no-merges v(current version, e.g. 0.7.2)..v(new version, e.g. 0.8.0) (or ping @wumpus on IRC, he has specific tooling to generate the list of merged pulls and sort them into categories based on labels) Generate list of authors: git log --format='%aN' "$*" | sort -ui | sed -e 's/^/- /' Tag version (or release candidate) in git git tag -s v(new version, e.g. 0.8.0) ### Setup and perform Gitian builds If you're using the automated script (found in [contrib/gitian-build.sh](/contrib/gitian-build.sh)), then at this point you should run it with the "--build" command. Otherwise ignore this. Setup Gitian descriptors: pushd ./bitcoin export SIGNER=(your Gitian key, ie bluematt, sipa, etc) export VERSION=(new version, e.g. 0.8.0) git fetch git checkout v${VERSION} popd Ensure your gitian.sigs are up-to-date if you wish to gverify your builds against other Gitian signatures. pushd ./gitian.sigs git pull popd Ensure gitian-builder is up-to-date: pushd ./gitian-builder git pull popd ### Fetch and create inputs: (first time, or when dependency versions change) pushd ./gitian-builder mkdir -p inputs wget -P inputs https://bitcoincore.org/cfields/osslsigncode-Backports-to-1.7.1.patch wget -P inputs http://downloads.sourceforge.net/project/osslsigncode/osslsigncode/osslsigncode-1.7.1.tar.gz popd Create the OS X SDK tarball, see the [OS X readme](README_osx.md) for details, and copy it into the inputs directory. ### Optional: Seed the Gitian sources cache and offline git repositories By default, Gitian will fetch source files as needed. To cache them ahead of time: pushd ./gitian-builder make -C ../bitcoin/depends download SOURCES_PATH=`pwd`/cache/common popd Only missing files will be fetched, so this is safe to re-run for each build. NOTE: Offline builds must use the --url flag to ensure Gitian fetches only from local URLs. For example: pushd ./gitian-builder ./bin/gbuild --url bitcoin=/path/to/bitcoin,signature=/path/to/sigs {rest of arguments} popd The gbuild invocations below DO NOT DO THIS by default. ### Build and sign Bitcoin Core for Linux, Windows, and OS X: pushd ./gitian-builder ./bin/gbuild --memory 3000 --commit bitcoin=v${VERSION} ../bitcoin/contrib/gitian-descriptors/gitian-linux.yml ./bin/gsign --signer $SIGNER --release ${VERSION}-linux --destination ../gitian.sigs/ ../bitcoin/contrib/gitian-descriptors/gitian-linux.yml mv build/out/bitcoin-*.tar.gz build/out/src/bitcoin-*.tar.gz ../ ./bin/gbuild --memory 3000 --commit bitcoin=v${VERSION} ../bitcoin/contrib/gitian-descriptors/gitian-win.yml ./bin/gsign --signer $SIGNER --release ${VERSION}-win-unsigned --destination ../gitian.sigs/ ../bitcoin/contrib/gitian-descriptors/gitian-win.yml mv build/out/bitcoin-*-win-unsigned.tar.gz inputs/bitcoin-win-unsigned.tar.gz mv build/out/bitcoin-*.zip build/out/bitcoin-*.exe ../ ./bin/gbuild --memory 3000 --commit bitcoin=v${VERSION} ../bitcoin/contrib/gitian-descriptors/gitian-osx.yml ./bin/gsign --signer $SIGNER --release ${VERSION}-osx-unsigned --destination ../gitian.sigs/ ../bitcoin/contrib/gitian-descriptors/gitian-osx.yml mv build/out/bitcoin-*-osx-unsigned.tar.gz inputs/bitcoin-osx-unsigned.tar.gz mv build/out/bitcoin-*.tar.gz build/out/bitcoin-*.dmg ../ popd Build output expected: 1. source tarball (`bitcoin-${VERSION}.tar.gz`) 2. linux 32-bit and 64-bit dist tarballs (`bitcoin-${VERSION}-linux[32|64].tar.gz`) 3. windows 32-bit and 64-bit unsigned installers and dist zips (`bitcoin-${VERSION}-win[32|64]-setup-unsigned.exe`, `bitcoin-${VERSION}-win[32|64].zip`) 4. OS X unsigned installer and dist tarball (`bitcoin-${VERSION}-osx-unsigned.dmg`, `bitcoin-${VERSION}-osx64.tar.gz`) 5. Gitian signatures (in `gitian.sigs/${VERSION}-/(your Gitian key)/`) ### Verify other gitian builders signatures to your own. (Optional) Add other gitian builders keys to your gpg keyring, and/or refresh keys. gpg --import bitcoin/contrib/gitian-keys/*.pgp gpg --refresh-keys Verify the signatures pushd ./gitian-builder ./bin/gverify -v -d ../gitian.sigs/ -r ${VERSION}-linux ../bitcoin/contrib/gitian-descriptors/gitian-linux.yml ./bin/gverify -v -d ../gitian.sigs/ -r ${VERSION}-win-unsigned ../bitcoin/contrib/gitian-descriptors/gitian-win.yml ./bin/gverify -v -d ../gitian.sigs/ -r ${VERSION}-osx-unsigned ../bitcoin/contrib/gitian-descriptors/gitian-osx.yml popd ### Next steps: Commit your signature to gitian.sigs: pushd gitian.sigs git add ${VERSION}-linux/${SIGNER} git add ${VERSION}-win-unsigned/${SIGNER} git add ${VERSION}-osx-unsigned/${SIGNER} git commit -a git push # Assuming you can push to the gitian.sigs tree popd Wait for Windows/OS X detached signatures: - Once the Windows/OS X builds each have 3 matching signatures, they will be signed with their respective release keys. - Detached signatures will then be committed to the [bitcoin-detached-sigs](https://github.com/bitcoin-core/bitcoin-detached-sigs) repository, which can be combined with the unsigned apps to create signed binaries. Create (and optionally verify) the signed OS X binary: pushd ./gitian-builder ./bin/gbuild -i --commit signature=v${VERSION} ../bitcoin/contrib/gitian-descriptors/gitian-osx-signer.yml ./bin/gsign --signer $SIGNER --release ${VERSION}-osx-signed --destination ../gitian.sigs/ ../bitcoin/contrib/gitian-descriptors/gitian-osx-signer.yml ./bin/gverify -v -d ../gitian.sigs/ -r ${VERSION}-osx-signed ../bitcoin/contrib/gitian-descriptors/gitian-osx-signer.yml mv build/out/bitcoin-osx-signed.dmg ../bitcoin-${VERSION}-osx.dmg popd Create (and optionally verify) the signed Windows binaries: pushd ./gitian-builder ./bin/gbuild -i --commit signature=v${VERSION} ../bitcoin/contrib/gitian-descriptors/gitian-win-signer.yml ./bin/gsign --signer $SIGNER --release ${VERSION}-win-signed --destination ../gitian.sigs/ ../bitcoin/contrib/gitian-descriptors/gitian-win-signer.yml ./bin/gverify -v -d ../gitian.sigs/ -r ${VERSION}-win-signed ../bitcoin/contrib/gitian-descriptors/gitian-win-signer.yml mv build/out/bitcoin-*win64-setup.exe ../bitcoin-${VERSION}-win64-setup.exe mv build/out/bitcoin-*win32-setup.exe ../bitcoin-${VERSION}-win32-setup.exe popd Commit your signature for the signed OS X/Windows binaries: pushd gitian.sigs git add ${VERSION}-osx-signed/${SIGNER} git add ${VERSION}-win-signed/${SIGNER} git commit -a git push # Assuming you can push to the gitian.sigs tree popd ### After 3 or more people have gitian-built and their results match: - Create `SHA256SUMS.asc` for the builds, and GPG-sign it: ```bash sha256sum * > SHA256SUMS ``` The list of files should be: ``` bitcoin-${VERSION}-aarch64-linux-gnu.tar.gz bitcoin-${VERSION}-arm-linux-gnueabihf.tar.gz bitcoin-${VERSION}-i686-pc-linux-gnu.tar.gz bitcoin-${VERSION}-x86_64-linux-gnu.tar.gz bitcoin-${VERSION}-osx64.tar.gz bitcoin-${VERSION}-osx.dmg bitcoin-${VERSION}.tar.gz bitcoin-${VERSION}-win32-setup.exe bitcoin-${VERSION}-win32.zip bitcoin-${VERSION}-win64-setup.exe bitcoin-${VERSION}-win64.zip ``` The `*-debug*` files generated by the gitian build contain debug symbols for troubleshooting by developers. It is assumed that anyone that is interested in debugging can run gitian to generate the files for themselves. To avoid end-user confusion about which file to pick, as well as save storage space *do not upload these to the bitcoin.org server, nor put them in the torrent*. - GPG-sign it, delete the unsigned file: ``` gpg --digest-algo sha256 --clearsign SHA256SUMS # outputs SHA256SUMS.asc rm SHA256SUMS ``` (the digest algorithm is forced to sha256 to avoid confusion of the `Hash:` header that GPG adds with the SHA256 used for the files) Note: check that SHA256SUMS itself doesn't end up in SHA256SUMS, which is a spurious/nonsensical entry. - Upload zips and installers, as well as `SHA256SUMS.asc` from last step, to the bitcoin.org server into `/var/www/bin/bitcoin-core-${VERSION}` - A `.torrent` will appear in the directory after a few minutes. Optionally help seed this torrent. To get the `magnet:` URI use: ```bash transmission-show -m ``` Insert the magnet URI into the announcement sent to mailing lists. This permits people without access to `bitcoin.org` to download the binary distribution. Also put it into the `optional_magnetlink:` slot in the YAML file for bitcoin.org (see below for bitcoin.org update instructions). - Update bitcoin.org version - First, check to see if the Bitcoin.org maintainers have prepared a release: https://github.com/bitcoin-dot-org/bitcoin.org/labels/Releases - If they have, it will have previously failed their Travis CI checks because the final release files weren't uploaded. Trigger a Travis CI rebuild---if it passes, merge. - If they have not prepared a release, follow the Bitcoin.org release instructions: https://github.com/bitcoin-dot-org/bitcoin.org#release-notes - After the pull request is merged, the website will automatically show the newest version within 15 minutes, as well as update the OS download links. Ping @saivann/@harding (saivann/harding on Freenode) in case anything goes wrong - Announce the release: - bitcoin-dev and bitcoin-core-dev mailing list - Bitcoin Core announcements list https://bitcoincore.org/en/list/announcements/join/ - bitcoincore.org blog post - Update title of #bitcoin on Freenode IRC - Optionally twitter, reddit /r/Bitcoin, ... but this will usually sort out itself - Notify BlueMatt so that he can start building [the PPAs](https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin) - Archive release notes for the new version to `doc/release-notes/` (branch `master` and branch of the release) - Create a [new GitHub release](https://github.com/bitcoin/bitcoin/releases/new) with a link to the archived release notes. - Celebrate