From c34a49f77f474c94e005331458111308a19afd53 Mon Sep 17 00:00:00 2001 From: "W. J. van der Laan" Date: Mon, 10 May 2021 14:03:46 +0200 Subject: qt: English translations update Update for Transifex. Needed after bitcoin/bitcoin#21836. --- src/qt/bitcoinstrings.cpp | 30 +- src/qt/locale/bitcoin_en.ts | 1187 +++++++-------- src/qt/locale/bitcoin_en.xlf | 3247 +++++++++++++++++++++--------------------- 3 files changed, 2234 insertions(+), 2230 deletions(-) (limited to 'src') diff --git a/src/qt/bitcoinstrings.cpp b/src/qt/bitcoinstrings.cpp index ab631459fb..dd4df44ed9 100644 --- a/src/qt/bitcoinstrings.cpp +++ b/src/qt/bitcoinstrings.cpp @@ -115,9 +115,6 @@ QT_TRANSLATE_NOOP("bitcoin-core", "" "Unable to replay blocks. You will need to rebuild the database using -" "reindex-chainstate."), QT_TRANSLATE_NOOP("bitcoin-core", "" -"Unable to rewind the database to a pre-fork state. You will need to " -"redownload the blockchain"), -QT_TRANSLATE_NOOP("bitcoin-core", "" "Unknown wallet file format \"%s\" provided. Please provide one of \"bdb\" or " "\"sqlite\"."), QT_TRANSLATE_NOOP("bitcoin-core", "" @@ -129,6 +126,9 @@ QT_TRANSLATE_NOOP("bitcoin-core", "" "Warning: We do not appear to fully agree with our peers! You may need to " "upgrade, or other nodes may need to upgrade."), QT_TRANSLATE_NOOP("bitcoin-core", "" +"Witness data for blocks after height %d requires validation. Please restart " +"with -reindex."), +QT_TRANSLATE_NOOP("bitcoin-core", "" "You need to rebuild the database using -reindex to go back to unpruned " "mode. This will redownload the entire blockchain"), QT_TRANSLATE_NOOP("bitcoin-core", "%s is set very high!"), @@ -173,7 +173,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Failed to rescan the wallet during initializa QT_TRANSLATE_NOOP("bitcoin-core", "Failed to verify database"), QT_TRANSLATE_NOOP("bitcoin-core", "Fee rate (%s) is lower than the minimum fee rate setting (%s)"), QT_TRANSLATE_NOOP("bitcoin-core", "Ignoring duplicate -wallet %s."), -QT_TRANSLATE_NOOP("bitcoin-core", "Importing..."), +QT_TRANSLATE_NOOP("bitcoin-core", "Importing…"), QT_TRANSLATE_NOOP("bitcoin-core", "Incorrect or no genesis block found. Wrong datadir for network?"), QT_TRANSLATE_NOOP("bitcoin-core", "Initialization sanity check failed. %s is shutting down."), QT_TRANSLATE_NOOP("bitcoin-core", "Insufficient funds"), @@ -186,20 +186,20 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Invalid amount for -discardfee=: '%s' QT_TRANSLATE_NOOP("bitcoin-core", "Invalid amount for -fallbackfee=: '%s'"), QT_TRANSLATE_NOOP("bitcoin-core", "Invalid amount for -paytxfee=: '%s' (must be at least %s)"), QT_TRANSLATE_NOOP("bitcoin-core", "Invalid netmask specified in -whitelist: '%s'"), -QT_TRANSLATE_NOOP("bitcoin-core", "Loading P2P addresses..."), -QT_TRANSLATE_NOOP("bitcoin-core", "Loading banlist..."), -QT_TRANSLATE_NOOP("bitcoin-core", "Loading block index..."), -QT_TRANSLATE_NOOP("bitcoin-core", "Loading wallet..."), +QT_TRANSLATE_NOOP("bitcoin-core", "Loading P2P addresses…"), +QT_TRANSLATE_NOOP("bitcoin-core", "Loading banlist…"), +QT_TRANSLATE_NOOP("bitcoin-core", "Loading block index…"), +QT_TRANSLATE_NOOP("bitcoin-core", "Loading wallet…"), QT_TRANSLATE_NOOP("bitcoin-core", "Need to specify a port with -whitebind: '%s'"), QT_TRANSLATE_NOOP("bitcoin-core", "No proxy server specified. Use -proxy= or -proxy=."), QT_TRANSLATE_NOOP("bitcoin-core", "Not enough file descriptors available."), QT_TRANSLATE_NOOP("bitcoin-core", "Prune cannot be configured with a negative value."), +QT_TRANSLATE_NOOP("bitcoin-core", "Prune mode is incompatible with -coinstatsindex."), QT_TRANSLATE_NOOP("bitcoin-core", "Prune mode is incompatible with -txindex."), -QT_TRANSLATE_NOOP("bitcoin-core", "Pruning blockstore..."), +QT_TRANSLATE_NOOP("bitcoin-core", "Pruning blockstore…"), QT_TRANSLATE_NOOP("bitcoin-core", "Reducing -maxconnections from %d to %d, because of system limitations."), -QT_TRANSLATE_NOOP("bitcoin-core", "Replaying blocks..."), -QT_TRANSLATE_NOOP("bitcoin-core", "Rescanning..."), -QT_TRANSLATE_NOOP("bitcoin-core", "Rewinding blocks..."), +QT_TRANSLATE_NOOP("bitcoin-core", "Replaying blocks…"), +QT_TRANSLATE_NOOP("bitcoin-core", "Rescanning…"), QT_TRANSLATE_NOOP("bitcoin-core", "SQLiteDatabase: Failed to execute statement to verify database: %s"), QT_TRANSLATE_NOOP("bitcoin-core", "SQLiteDatabase: Failed to fetch sqlite wallet schema version: %s"), QT_TRANSLATE_NOOP("bitcoin-core", "SQLiteDatabase: Failed to fetch the application id: %s"), @@ -212,7 +212,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Specified -walletdir \"%s\" does not exist"), QT_TRANSLATE_NOOP("bitcoin-core", "Specified -walletdir \"%s\" is a relative path"), QT_TRANSLATE_NOOP("bitcoin-core", "Specified -walletdir \"%s\" is not a directory"), QT_TRANSLATE_NOOP("bitcoin-core", "Specified blocks directory \"%s\" does not exist."), -QT_TRANSLATE_NOOP("bitcoin-core", "Starting network threads..."), +QT_TRANSLATE_NOOP("bitcoin-core", "Starting network threads…"), QT_TRANSLATE_NOOP("bitcoin-core", "The source code is available from %s."), QT_TRANSLATE_NOOP("bitcoin-core", "The specified config file %s does not exist"), QT_TRANSLATE_NOOP("bitcoin-core", "The transaction amount is too small to pay the fee"), @@ -241,8 +241,8 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Unsupported logging category %s=%s."), QT_TRANSLATE_NOOP("bitcoin-core", "Upgrading UTXO database"), QT_TRANSLATE_NOOP("bitcoin-core", "Upgrading txindex database"), QT_TRANSLATE_NOOP("bitcoin-core", "User Agent comment (%s) contains unsafe characters."), -QT_TRANSLATE_NOOP("bitcoin-core", "Verifying blocks..."), -QT_TRANSLATE_NOOP("bitcoin-core", "Verifying wallet(s)..."), +QT_TRANSLATE_NOOP("bitcoin-core", "Verifying blocks…"), +QT_TRANSLATE_NOOP("bitcoin-core", "Verifying wallet(s)…"), QT_TRANSLATE_NOOP("bitcoin-core", "Wallet needed to be rewritten: restart %s to complete"), QT_TRANSLATE_NOOP("bitcoin-core", "Warning: unknown new rules activated (versionbit %i)"), }; diff --git a/src/qt/locale/bitcoin_en.ts b/src/qt/locale/bitcoin_en.ts index e2640c8884..a911f8012e 100644 --- a/src/qt/locale/bitcoin_en.ts +++ b/src/qt/locale/bitcoin_en.ts @@ -95,22 +95,27 @@ Signing is only possible with addresses of the type 'legacy'. - - &Copy Address + + Copy Address - Copy &Label + Copy Label - &Edit + Edit - + + Delete + + + + Export Address List @@ -313,7 +318,7 @@ Signing is only possible with addresses of the type 'legacy'. BitcoinApplication - + Runaway exception @@ -336,17 +341,7 @@ Signing is only possible with addresses of the type 'legacy'. BitcoinGUI - - Sign &message... - Sign &message... - - - - Synchronizing with network... - Synchronizing with network... - - - + &Overview &Overview @@ -395,43 +390,13 @@ Signing is only possible with addresses of the type 'legacy'. Show information about Qt Show information about Qt - - - &Options... - &Options... - - - - Modify configuration options for %1 - - - - - &Encrypt Wallet... - &Encrypt Wallet... - - &Backup Wallet... - &Backup Wallet... - - - - &Change Passphrase... - &Change Passphrase... - - - - Open &URI... - - - - - Create Wallet... + Modify configuration options for %1 - + Create a new wallet @@ -456,17 +421,7 @@ Signing is only possible with addresses of the type 'legacy'. - - Syncing Headers (%1%)... - - - - - Reindexing blocks on disk... - Reindexing blocks on disk... - - - + Proxy is enabled: %1 @@ -486,12 +441,7 @@ Signing is only possible with addresses of the type 'legacy'. Change the passphrase used for wallet encryption - - &Verify message... - &Verify message... - - - + &Send &Send @@ -501,7 +451,12 @@ Signing is only possible with addresses of the type 'legacy'. &Receive - + + &Options… + + + + &Show / Hide &Show / Hide @@ -511,22 +466,77 @@ Signing is only possible with addresses of the type 'legacy'. Show or hide the main Window - + + &Encrypt Wallet… + + + + Encrypt the private keys that belong to your wallet Encrypt the private keys that belong to your wallet - + + &Backup Wallet… + + + + + &Change Passphrase… + + + + + Sign &message… + + + + Sign messages with your Bitcoin addresses to prove you own them Sign messages with your Bitcoin addresses to prove you own them - + + &Verify message… + + + + Verify messages to ensure they were signed with specified Bitcoin addresses Verify messages to ensure they were signed with specified Bitcoin addresses - + + &Load PSBT from file… + + + + + Load PSBT from clipboard… + + + + + Open &URI… + + + + + Close Wallet… + + + + + Create Wallet… + + + + + Close All Wallets… + + + + &File &File @@ -546,7 +556,37 @@ Signing is only possible with addresses of the type 'legacy'. Tabs toolbar - + + Syncing Headers (%1%)… + + + + + Synchronizing with network… + + + + + Indexing blocks on disk… + + + + + Processing blocks on disk… + + + + + Reindexing blocks on disk… + + + + + Connecting to peers… + + + + Request payments (generates QR codes and bitcoin: URIs) @@ -573,18 +613,8 @@ Signing is only possible with addresses of the type 'legacy'. %n active connections to Bitcoin network - - - Indexing blocks on disk... - - - - - Processing blocks on disk... - - - + Processed %n block(s) of transaction history. Processed %n block of transaction history. @@ -597,7 +627,12 @@ Signing is only possible with addresses of the type 'legacy'. %1 behind - + + Catching up… + + + + Last received block was generated %1 ago. Last received block was generated %1 ago. @@ -627,22 +662,12 @@ Signing is only possible with addresses of the type 'legacy'. Up to date - - &Load PSBT from file... - - - - + Load Partially Signed Bitcoin Transaction - - Load PSBT from clipboard... - - - - + Load Partially Signed Bitcoin Transaction from clipboard @@ -682,22 +707,12 @@ Signing is only possible with addresses of the type 'legacy'. - - Close Wallet... - - - - + Close wallet - - Close All Wallets... - - - - + Close all wallets @@ -752,17 +767,7 @@ Signing is only possible with addresses of the type 'legacy'. - - Connecting to peers... - - - - - Catching up... - Catching up... - - - + Error: %1 @@ -936,7 +941,7 @@ Signing is only possible with addresses of the type 'legacy'. Confirmed - + Copy address @@ -947,17 +952,17 @@ Signing is only possible with addresses of the type 'legacy'. - + Copy amount - + Copy transaction ID - + Lock unspent @@ -967,7 +972,7 @@ Signing is only possible with addresses of the type 'legacy'. - + Copy quantity @@ -1042,7 +1047,7 @@ Signing is only possible with addresses of the type 'legacy'. CreateWalletActivity - Creating Wallet %1... + Creating Wallet %1… @@ -1200,7 +1205,7 @@ Signing is only possible with addresses of the type 'legacy'. FreespaceChecker - + A new data directory will be created. A new data directory will be created. @@ -1266,12 +1271,22 @@ Signing is only possible with addresses of the type 'legacy'. - + + Limit block chain storage to + + + + Reverting this setting requires re-downloading the entire blockchain. It is faster to download the full chain first and prune it later. Disables some advanced features. - + + GB + + + + This initial synchronisation is very demanding, and may expose hardware problems with your computer that had previously gone unnoticed. Each time you run %1, it will continue downloading where it left off. @@ -1281,7 +1296,7 @@ Signing is only possible with addresses of the type 'legacy'. - + Use the default data directory Use the default data directory @@ -1296,12 +1311,22 @@ Signing is only possible with addresses of the type 'legacy'. Bitcoin - - Discard blocks after verification, except most recent %1 GB (prune) + + %1 GB of free space available + + + + + (of %1 GB needed) - + + (%1 GB needed for full chain) + + + + At least %1 GB of data will be stored in this directory, and it will grow over time. @@ -1310,8 +1335,17 @@ Signing is only possible with addresses of the type 'legacy'. Approximately %1 GB of data will be stored in this directory. + + + (sufficient to restore backups %n day(s) old) + block chain pruning + + + + + - + %1 will download and store a copy of the Bitcoin block chain. @@ -1321,7 +1355,7 @@ Signing is only possible with addresses of the type 'legacy'. - + Error: Specified data directory "%1" cannot be created. @@ -1330,30 +1364,6 @@ Signing is only possible with addresses of the type 'legacy'. Error Error - - - %n GB of free space available - - %n GB of free space available - %n GB of free space available - - - - - (of %n GB needed) - - (of %n GB needed) - (of %n GB needed) - - - - - (%n GB needed for full chain) - - - - - ModalOverlay @@ -1380,12 +1390,18 @@ Signing is only possible with addresses of the type 'legacy'. - - Unknown... + + Unknown… + + + + + + calculating… - + Last block time Last block time @@ -1395,18 +1411,12 @@ Signing is only possible with addresses of the type 'legacy'. - + Progress increase per hour - - calculating... - - - - Estimated time left until synced @@ -1421,13 +1431,13 @@ Signing is only possible with addresses of the type 'legacy'. - + %1 is currently syncing. It will download headers and blocks from peers and validate them until reaching the tip of the block chain. - - Unknown. Syncing Headers (%1, %2%)... + + Unknown. Syncing Headers (%1, %2%)… @@ -1463,7 +1473,7 @@ Signing is only possible with addresses of the type 'legacy'. - Opening Wallet %1... + Opening Wallet %1… @@ -1978,7 +1988,7 @@ Signing is only possible with addresses of the type 'legacy'. - Save... + Save… @@ -2122,19 +2132,19 @@ Signing is only possible with addresses of the type 'legacy'. - + URI handling - + 'bitcoin://' is not a valid URI. Use 'bitcoin:' instead. - + Cannot process payment request because BIP70 is not supported. Due to widespread security flaws in BIP70 it's strongly recommended that any merchant instructions to switch wallets be ignored. @@ -2142,12 +2152,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - - Invalid payment address %1 - - - - + URI cannot be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters. @@ -2160,7 +2165,7 @@ If you are receiving this error you should request the merchant provide a BIP21 PeerTableModel - + User Agent @@ -2213,7 +2218,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Unroutable @@ -2389,11 +2394,11 @@ If you are receiving this error you should request the merchant provide a BIP21 - %1 didn't yet exit safely... + %1 didn't yet exit safely… - + unknown @@ -2402,16 +2407,16 @@ If you are receiving this error you should request the merchant provide a BIP21 QRImageWidget - &Save Image... + Save Image… - - &Copy Image + + Copy Image - + Resulting URI too long, try to reduce the text for label / message. @@ -2451,13 +2456,13 @@ If you are receiving this error you should request the merchant provide a BIP21 - + - + @@ -2474,12 +2479,12 @@ If you are receiving this error you should request the merchant provide a BIP21 - + N/A N/A - + Client version Client version @@ -2520,12 +2525,12 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Network Network - + Name @@ -2571,29 +2576,29 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Received - - + + Sent - + &Peers - + Banned peers - - + + Select a peer to view detailed information. @@ -2603,7 +2608,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Starting Block @@ -2628,13 +2633,13 @@ If you are receiving this error you should request the merchant provide a BIP21 - - + + User Agent - + Node window @@ -2659,7 +2664,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Permissions @@ -2684,7 +2689,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Whether the peer requested us to relay transactions. @@ -2764,7 +2769,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Last block time Last block time @@ -2789,7 +2794,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - + In: @@ -2808,31 +2813,6 @@ If you are receiving this error you should request the merchant provide a BIP21 Clear console Clear console - - - 1 &hour - - - - - 1 &day - - - - - 1 &week - - - - - 1 &year - - - - - &Disconnect - - Yes @@ -2864,7 +2844,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Inbound: initiated by peer @@ -2909,12 +2889,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - - &Unban - - - - + Welcome to the %1 RPC console. @@ -2949,17 +2924,47 @@ If you are receiving this error you should request the merchant provide a BIP21 - + (peer id: %1) - + Executing command using "%1" wallet - + + Disconnect + + + + + 1 hour + + + + + 1 day + + + + + 1 week + + + + + 1 year + + + + + Unban + + + + via %1 @@ -3068,7 +3073,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Copy URI @@ -3093,7 +3098,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Could not unlock wallet. @@ -3107,7 +3112,7 @@ If you are receiving this error you should request the merchant provide a BIP21 ReceiveRequestDialog - Request payment to ... + Request payment to … @@ -3147,7 +3152,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - &Save Image... + &Save Image… @@ -3213,12 +3218,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - - Inputs... - - - - + automatically selected @@ -3273,12 +3273,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - - Choose... - - - - + Using the fallbackfee can result in sending a transaction that will take several hours or days (or never) to confirm. Consider choosing your fee manually or wait until you have validated the complete chain. @@ -3288,14 +3283,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - - Specify a custom fee per kB (1,000 bytes) of the transaction's virtual size. - -Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis per kB" for a transaction size of 500 bytes (half of 1 kB) would ultimately yield a fee of only 50 satoshis. - - - - + per kilobyte @@ -3315,12 +3303,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos - - (Smart fee not initialized yet. This usually takes a few blocks...) - - - - + Send to multiple recipients at once Send to multiple recipients at once @@ -3335,17 +3318,34 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos - + + Inputs… + + + + Dust: - + + Choose… + + + + Hide transaction fee settings - + + Specify a custom fee per kB (1,000 bytes) of the transaction's virtual size. + +Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 satoshis per kvB" for a transaction size of 500 virtual bytes (half of 1 kvB) would ultimately yield a fee of only 50 satoshis. + + + + When there is less transaction volume than space in the blocks, miners as well as relaying nodes may enforce a minimum fee. Paying only this minimum fee is just fine, but be aware that this can result in a never confirming transaction once there is more demand for bitcoin transactions than the network can process. @@ -3355,7 +3355,12 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos - + + (Smart fee not initialized yet. This usually takes a few blocks…) + + + + Confirmation time target: @@ -3465,7 +3470,12 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos - + + To review recipient list click "Show Details…" + + + + Create Unsigned @@ -3515,12 +3525,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos - - To review recipient list click "Show Details..." - - - - + Confirm send coins @@ -3594,7 +3599,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos - + Warning: Invalid Bitcoin address @@ -3733,7 +3738,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos ShutdownWindow - %1 is shutting down... + %1 is shutting down… @@ -4366,12 +4371,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos - - Range... - - - - + Received with @@ -4406,17 +4406,17 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos - + Abandon transaction - + Increase transaction fee - + Copy address @@ -4446,23 +4446,28 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos - + Edit address label - + Comma separated file Name of CSV file format - + Show transaction details - + + Range… + + + + Export Transaction History @@ -4748,789 +4753,789 @@ Go to File > Open Wallet to load a wallet. bitcoin-core - - Distributed under the MIT software license, see the accompanying file %s or %s + + The %s developers - - Prune configured below the minimum of %d MiB. Please use a higher number. + + %s corrupt. Try using the wallet tool bitcoin-wallet to salvage or restoring a backup. - - Prune: last wallet synchronisation goes beyond pruned data. You need to -reindex (download the whole blockchain again in case of pruned node) + + -maxtxfee is set very high! Fees this large could be paid on a single transaction. - - Pruning blockstore... + + Cannot downgrade wallet from version %i to version %i. Wallet version unchanged. - - Unable to start HTTP server. See debug log for details. + + Cannot obtain a lock on data directory %s. %s is probably already running. - - The %s developers + + Cannot provide specific connections and have addrman find outgoing connections at the same. - - Cannot obtain a lock on data directory %s. %s is probably already running. + + Cannot upgrade a non HD split wallet from version %i to version %i without upgrading to support pre-split keypool. Please use version %i or no version specified. - - Cannot provide specific connections and have addrman find outgoing connections at the same. + + Distributed under the MIT software license, see the accompanying file %s or %s - + Error reading %s! All keys read correctly, but transaction data or address book entries might be missing or incorrect. - - More than one onion bind address is provided. Using %s for the automatically created Tor onion service. + + Error: Dumpfile format record is incorrect. Got "%s", expected "format". - - Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly. + + Error: Dumpfile identifier record is incorrect. Got "%s", expected "%s". + + + + + Error: Dumpfile version is not supported. This version of bitcoin-wallet only supports version 1 dumpfiles. Got dumpfile with version %s - Please contribute if you find %s useful. Visit %s for further information about the software. + Error: Listening for incoming connections failed (listen returned error %s) - - SQLiteDatabase: Failed to prepare the statement to fetch sqlite wallet schema version: %s + + Fee estimation failed. Fallbackfee is disabled. Wait a few blocks or enable -fallbackfee. - SQLiteDatabase: Failed to prepare the statement to fetch the application id: %s + File %s already exists. If you are sure this is what you want, move it out of the way first. - SQLiteDatabase: Unknown sqlite wallet schema version %d. Only version %d is supported + Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions) - The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correct + More than one onion bind address is provided. Using %s for the automatically created Tor onion service. - - This is a pre-release test build - use at your own risk - do not use for mining or merchant applications + + No dump file provided. To use createfromdump, -dumpfile=<filename> must be provided. - - This is the transaction fee you may discard if change is smaller than dust at this level + + No dump file provided. To use dump, -dumpfile=<filename> must be provided. - - Unable to replay blocks. You will need to rebuild the database using -reindex-chainstate. + + No wallet file format provided. To use createfromdump, -format=<format> must be provided. - Unable to rewind the database to a pre-fork state. You will need to redownload the blockchain + Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly. - - Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade. + + Please contribute if you find %s useful. Visit %s for further information about the software. - - -maxmempool must be at least %d MB + + Prune configured below the minimum of %d MiB. Please use a higher number. - Cannot resolve -%s address: '%s' + Prune: last wallet synchronisation goes beyond pruned data. You need to -reindex (download the whole blockchain again in case of pruned node) - Change index out of range + SQLiteDatabase: Failed to prepare the statement to fetch sqlite wallet schema version: %s - - Config setting for %s only applied on %s network when in [%s] section. + + SQLiteDatabase: Failed to prepare the statement to fetch the application id: %s - - Copyright (C) %i-%i + + SQLiteDatabase: Unknown sqlite wallet schema version %d. Only version %d is supported - - Corrupted block database detected - Corrupted block database detected - - - - Could not find asmap file %s + + The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correct - - Could not parse asmap file %s + + The transaction amount is too small to send after the fee has been deducted - Do you want to rebuild the block database now? - Do you want to rebuild the block database now? + This error could occur if this wallet was not shutdown cleanly and was last loaded using a build with a newer version of Berkeley DB. If so, please use the software that last loaded this wallet + - - Dump file %s does not exist. + + This is a pre-release test build - use at your own risk - do not use for mining or merchant applications - - Error creating %s + + This is the maximum transaction fee you pay (in addition to the normal fee) to prioritize partial spend avoidance over regular coin selection. - - Error initializing block database - Error initializing block database + + This is the transaction fee you may discard if change is smaller than dust at this level + - - Error initializing wallet database environment %s! - Error initializing wallet database environment %s! + + This is the transaction fee you may pay when fee estimates are not available. + - - Error loading %s + + Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments. - - Error loading %s: Private keys can only be disabled during creation + + Transaction needs a change address, but we can't generate it. Please call keypoolrefill first. - - Error loading %s: Wallet corrupted + + Unable to replay blocks. You will need to rebuild the database using -reindex-chainstate. - - Error loading %s: Wallet requires newer version of %s + + Unknown wallet file format "%s" provided. Please provide one of "bdb" or "sqlite". - - Error loading block database - Error loading block database + + Warning: Dumpfile wallet format "%s" does not match command line specified format "%s". + - - Error opening block database - Error opening block database + + Warning: Private keys detected in wallet {%s} with disabled private keys + - Error reading next record from wallet database + Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade. - - Error: Couldn't create cursor into database + + Witness data for blocks after height %d requires validation. Please restart with -reindex. - - Error: Dumpfile checksum does not match. Computed %s, expected %s + + You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain - - Error: Got key that was not hex: %s + + %s is set very high! - Error: Got value that was not hex: %s + -maxmempool must be at least %d MB - - Error: Missing checksum + + A fatal internal error occurred, see debug.log for details - Error: Unable to parse version %u as a uint32_t + Cannot resolve -%s address: '%s' - Error: Unable to write record to new wallet + Cannot set -peerblockfilters without -blockfilterindex. - Failed to listen on any port. Use -listen=0 if you want this. - Failed to listen on any port. Use -listen=0 if you want this. + Cannot write to data directory '%s'; check permissions. + - Failed to rescan the wallet during initialization + Change index out of range - Failed to verify database + Config setting for %s only applied on %s network when in [%s] section. - - Ignoring duplicate -wallet %s. + + Copyright (C) %i-%i - Importing... + Corrupted block database detected - Incorrect or no genesis block found. Wrong datadir for network? - Incorrect or no genesis block found. Wrong datadir for network? + Could not find asmap file %s + - Initialization sanity check failed. %s is shutting down. + Could not parse asmap file %s - - Invalid -i2psam address or hostname: '%s' + + Disk space is too low! - - Invalid P2P permission: '%s' + + Do you want to rebuild the block database now? - Invalid amount for -%s=<amount>: '%s' + Done loading - Invalid amount for -discardfee=<amount>: '%s' + Dump file %s does not exist. - Invalid amount for -fallbackfee=<amount>: '%s' + Error creating %s - - SQLiteDatabase: Failed to execute statement to verify database: %s + + Error initializing block database - SQLiteDatabase: Failed to fetch sqlite wallet schema version: %s + Error initializing wallet database environment %s! - SQLiteDatabase: Failed to fetch the application id: %s + Error loading %s - SQLiteDatabase: Failed to prepare statement to verify database: %s + Error loading %s: Private keys can only be disabled during creation - SQLiteDatabase: Failed to read database verification error: %s + Error loading %s: Wallet corrupted - SQLiteDatabase: Unexpected application id. Expected %u, got %u + Error loading %s: Wallet requires newer version of %s - - Specified blocks directory "%s" does not exist. + + Error loading block database - - The specified config file %s does not exist + + Error opening block database - - Unable to open %s for writing + + Error reading from database, shutting down. - - Unknown address type '%s' + + Error reading next record from wallet database - Unknown change type '%s' + Error upgrading chainstate database - - Upgrading txindex database + + Error: Couldn't create cursor into database - - Loading P2P addresses... + + Error: Disk space is low for %s - - Cannot downgrade wallet from version %i to version %i. Wallet version unchanged. + + Error: Dumpfile checksum does not match. Computed %s, expected %s - - Cannot upgrade a non HD split wallet from version %i to version %i without upgrading to support pre-split keypool. Please use version %i or no version specified. + + Error: Got key that was not hex: %s - - Error: Dumpfile format record is incorrect. Got "%s", expected "format". + + Error: Got value that was not hex: %s - - Error: Dumpfile identifier record is incorrect. Got "%s", expected "%s". + + Error: Keypool ran out, please call keypoolrefill first - - Error: Dumpfile version is not supported. This version of bitcoin-wallet only supports version 1 dumpfiles. Got dumpfile with version %s + + Error: Missing checksum - - File %s already exists. If you are sure this is what you want, move it out of the way first. + + Error: Unable to parse version %u as a uint32_t - - No dump file provided. To use createfromdump, -dumpfile=<filename> must be provided. + + Error: Unable to write record to new wallet - - No dump file provided. To use dump, -dumpfile=<filename> must be provided. + + Failed to listen on any port. Use -listen=0 if you want this. - - No wallet file format provided. To use createfromdump, -format=<format> must be provided. + + Failed to rescan the wallet during initialization - - Unknown wallet file format "%s" provided. Please provide one of "bdb" or "sqlite". + + Failed to verify database - - Warning: Dumpfile wallet format "%s" does not match command line specified format "%s". + + Fee rate (%s) is lower than the minimum fee rate setting (%s) - - Loading banlist... + + Ignoring duplicate -wallet %s. - - Not enough file descriptors available. - Not enough file descriptors available. + + Importing… + - Prune cannot be configured with a negative value. + Incorrect or no genesis block found. Wrong datadir for network? - Prune mode is incompatible with -txindex. + Initialization sanity check failed. %s is shutting down. - - Replaying blocks... + + Insufficient funds - - Rewinding blocks... + + Invalid -i2psam address or hostname: '%s' - - The source code is available from %s. + + Invalid -onion address or hostname: '%s' - - Transaction fee and change calculation failed + + Invalid -proxy address or hostname: '%s' - - Unable to bind to %s on this computer. %s is probably already running. + + Invalid P2P permission: '%s' - - Unable to generate keys + + Invalid amount for -%s=<amount>: '%s' - - Unsupported logging category %s=%s. + + Invalid amount for -discardfee=<amount>: '%s' - Upgrading UTXO database + Invalid amount for -fallbackfee=<amount>: '%s' - - User Agent comment (%s) contains unsafe characters. + + Invalid amount for -paytxfee=<amount>: '%s' (must be at least %s) - Verifying blocks... - Verifying blocks... + Invalid netmask specified in -whitelist: '%s' + - - Wallet needed to be rewritten: restart %s to complete + + Loading P2P addresses… - - Error: Listening for incoming connections failed (listen returned error %s) + + Loading banlist… - - %s corrupt. Try using the wallet tool bitcoin-wallet to salvage or restoring a backup. + + Loading block index… - - Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions) + + Loading wallet… - - The transaction amount is too small to send after the fee has been deducted + + Need to specify a port with -whitebind: '%s' - - This error could occur if this wallet was not shutdown cleanly and was last loaded using a build with a newer version of Berkeley DB. If so, please use the software that last loaded this wallet + + No proxy server specified. Use -proxy=<ip> or -proxy=<ip:port>. - - This is the maximum transaction fee you pay (in addition to the normal fee) to prioritize partial spend avoidance over regular coin selection. + + Not enough file descriptors available. - - Transaction needs a change address, but we can't generate it. Please call keypoolrefill first. + + Prune cannot be configured with a negative value. - - You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain + + Prune mode is incompatible with -coinstatsindex. - - A fatal internal error occurred, see debug.log for details + + Prune mode is incompatible with -txindex. - - Cannot set -peerblockfilters without -blockfilterindex. + + Pruning blockstore… - - Disk space is too low! + + Reducing -maxconnections from %d to %d, because of system limitations. - - Error reading from database, shutting down. + + Replaying blocks… - - Error upgrading chainstate database + + Rescanning… - - Error: Disk space is low for %s + + SQLiteDatabase: Failed to execute statement to verify database: %s - - Error: Keypool ran out, please call keypoolrefill first + + SQLiteDatabase: Failed to fetch sqlite wallet schema version: %s - - Fee rate (%s) is lower than the minimum fee rate setting (%s) + + SQLiteDatabase: Failed to fetch the application id: %s - - Invalid -onion address or hostname: '%s' + + SQLiteDatabase: Failed to prepare statement to verify database: %s - Invalid -proxy address or hostname: '%s' + SQLiteDatabase: Failed to read database verification error: %s - - Invalid amount for -paytxfee=<amount>: '%s' (must be at least %s) + + SQLiteDatabase: Unexpected application id. Expected %u, got %u - Invalid netmask specified in -whitelist: '%s' + Section [%s] is not recognized. - - Need to specify a port with -whitebind: '%s' + + Signing transaction failed - No proxy server specified. Use -proxy=<ip> or -proxy=<ip:port>. + Specified -walletdir "%s" does not exist - - Reducing -maxconnections from %d to %d, because of system limitations. + + Specified -walletdir "%s" is a relative path - - Section [%s] is not recognized. + + Specified -walletdir "%s" is not a directory - Signing transaction failed - Signing transaction failed + Specified blocks directory "%s" does not exist. + - Specified -walletdir "%s" does not exist + Starting network threads… - Specified -walletdir "%s" is a relative path + The source code is available from %s. - Specified -walletdir "%s" is not a directory + The specified config file %s does not exist - + The transaction amount is too small to pay the fee - - This is experimental software. + + The wallet will avoid paying less than the minimum relay fee. - - Transaction amount too small - Transaction amount too small + + This is experimental software. + - - Transaction too large - Transaction too large + + This is the minimum transaction fee you pay on every transaction. + - Unable to bind to %s on this computer (bind returned error %s) + This is the transaction fee you will pay if you send a transaction. - - Unable to create the PID file '%s': %s + + Transaction amount too small - Unable to generate initial keys + Transaction amounts must not be negative - - Unknown -blockfilterindex value %s. + + Transaction fee and change calculation failed - - Verifying wallet(s)... + + Transaction has too long of a mempool chain - - Warning: unknown new rules activated (versionbit %i) + + Transaction must have at least one recipient - - -maxtxfee is set very high! Fees this large could be paid on a single transaction. + + Transaction too large - - This is the transaction fee you may pay when fee estimates are not available. + + Unable to bind to %s on this computer (bind returned error %s) - - Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments. + + Unable to bind to %s on this computer. %s is probably already running. - - %s is set very high! + + Unable to create the PID file '%s': %s - - Starting network threads... + + Unable to generate initial keys - - The wallet will avoid paying less than the minimum relay fee. + + Unable to generate keys - - This is the minimum transaction fee you pay on every transaction. + + Unable to open %s for writing - This is the transaction fee you will pay if you send a transaction. + Unable to start HTTP server. See debug log for details. - - Transaction amounts must not be negative + + Unknown -blockfilterindex value %s. - - Transaction has too long of a mempool chain + + Unknown address type '%s' - Transaction must have at least one recipient + Unknown change type '%s' - + Unknown network specified in -onlynet: '%s' - Unknown network specified in -onlynet: '%s' + - - Insufficient funds - Insufficient funds + + Unsupported logging category %s=%s. + - - Fee estimation failed. Fallbackfee is disabled. Wait a few blocks or enable -fallbackfee. + + Upgrading UTXO database - - Warning: Private keys detected in wallet {%s} with disabled private keys + + Upgrading txindex database - - Cannot write to data directory '%s'; check permissions. + + User Agent comment (%s) contains unsafe characters. - - Loading block index... - Loading block index... + + Verifying blocks… + - Loading wallet... - Loading wallet... + Verifying wallet(s)… + - - Rescanning... - Rescanning... + + Wallet needed to be rewritten: restart %s to complete + - - Done loading - Done loading + + Warning: unknown new rules activated (versionbit %i) + diff --git a/src/qt/locale/bitcoin_en.xlf b/src/qt/locale/bitcoin_en.xlf index a8a5f57f15..19ba95d999 100644 --- a/src/qt/locale/bitcoin_en.xlf +++ b/src/qt/locale/bitcoin_en.xlf @@ -98,58 +98,63 @@ Signing is only possible with addresses of the type 'legacy'. 109

- &Copy Address + Copy Address - 116 + 117

- Copy &Label + Copy Label - 117 + 118

- &Edit + Edit - 118 + 119

- Export Address List + Delete - 297 + 122

+ Export Address List + + 283 + + Comma separated file - 298 + 284

Name of CSV file format

- + There was an error trying to save the address list to %1. Please try again. - 313 + 299

An error message.

%1 is a name of the file (e.g., "addrbook.csv") that the bitcoin addresses were exported to. - + Exporting Failed - 311 + 297 - + Label

168

- + Address

168

- + (no label) 206 @@ -158,27 +163,27 @@ Signing is only possible with addresses of the type 'legacy'. - + Passphrase Dialog Passphrase Dialog

- + Enter passphrase Enter passphrase

- + New passphrase New passphrase

- + Repeat new passphrase Repeat new passphrase

- + Show passphrase 98 @@ -187,83 +192,83 @@ Signing is only possible with addresses of the type 'legacy'. - + Encrypt wallet

- + This operation needs your wallet passphrase to unlock the wallet.

- + Unlock wallet

- + Change passphrase

- + Confirm wallet encryption

110

- + Warning: If you encrypt your wallet and lose your passphrase, you will LOSE ALL OF YOUR BITCOINS!

111

- + Are you sure you wish to encrypt your wallet?

111

- + Wallet encrypted

129

173

- + Enter the new passphrase for the wallet. Please use a passphrase of ten or more random characters, or eight or more words.

- + Enter the old passphrase and new passphrase for the wallet.

- + Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer.

118

- + Wallet to be encrypted

122

- + Your wallet is about to be encrypted.

124

- + Your wallet is now encrypted.

131

- + IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet.

133

- + Wallet encryption failed 139 @@ -271,35 +276,35 @@ Signing is only possible with addresses of the type 'legacy'. 179

185

- + Wallet encryption failed due to an internal error. Your wallet was not encrypted.

140

- + The supplied passphrases do not match.

148

186

- + Wallet unlock failed

159

165

- + The passphrase entered for the wallet decryption was incorrect.

160

180

- + Wallet passphrase was successfully changed.

174

- + Warning: The Caps Lock key is on! 220 @@ -309,12 +314,12 @@ Signing is only possible with addresses of the type 'legacy'. - + IP/Netmask

- + Banned Until 85 @@ -323,578 +328,578 @@ Signing is only possible with addresses of the type 'legacy'. - + Runaway exception - 423 + 421 - + A fatal error occurred. %1 can no longer continue safely and will quit. - 424 + 422 - + Internal error - 433 + 431 - + An internal error occurred. %1 will attempt to continue safely. This is an unexpected bug which can be reported as described below. - 434 + 432 - + Error: Specified data directory "%1" does not exist. - 545 + 543 - + Error: Cannot parse configuration file: %1. - 551 + 549 - + Error: %1 - 566 + 564 - + Error initializing settings: %1 - 575 + 573 - - %1 didn't yet exit safely... + + %1 didn't yet exit safely… - 638 + 636 - - Sign &message... - Sign &message... - 325 - - Synchronizing with network... - Synchronizing with network... - 993 - - &Overview &Overview

247

- + Show general overview of wallet Show general overview of wallet

248

- + &Transactions &Transactions

276

- + Browse transaction history Browse transaction history

277

- + E&xit E&xit

300

- + Quit application Quit application

301

- + &About %1

304

- + Show information about %1

305

- + About &Qt About &Qt

308

- + Show information about Qt Show information about Qt

309

- - &Options... - &Options... - 311 - - + Modify configuration options for %1

312

- - &Encrypt Wallet... - &Encrypt Wallet... - 318 - - - &Backup Wallet... - &Backup Wallet... - 321 - - - &Change Passphrase... - &Change Passphrase... - 323 - - - Open &URI... - - 345 - - - Create Wallet... - - 356 - - + Create a new wallet

358

- + Wallet:

567

- + Click to disable network activity.

918

- + Network activity disabled.

920

- + Click to enable network activity again.

920

- - Syncing Headers (%1%)... - - 947 - - - Reindexing blocks on disk... - Reindexing blocks on disk... - 1004 - - + Proxy is enabled: %1

1319

- + Send coins to a Bitcoin address Send coins to a Bitcoin address

255

- + Backup wallet to another location Backup wallet to another location

322

- + Change the passphrase used for wallet encryption Change the passphrase used for wallet encryption

324

- - &Verify message... - &Verify message... - 327 - - + &Send &Send

254

- + &Receive &Receive

265

- + + &Options… + + 311 + + &Show / Hide &Show / Hide

315

- + Show or hide the main Window Show or hide the main Window

316

- + + &Encrypt Wallet… + + 318 + + Encrypt the private keys that belong to your wallet Encrypt the private keys that belong to your wallet

319

- + + &Backup Wallet… + + 321 + + + &Change Passphrase… + + 323 + + + Sign &message… + + 325 + + Sign messages with your Bitcoin addresses to prove you own them Sign messages with your Bitcoin addresses to prove you own them

326

- + + &Verify message… + + 327 + + Verify messages to ensure they were signed with specified Bitcoin addresses Verify messages to ensure they were signed with specified Bitcoin addresses

328

- + + &Load PSBT from file… + + 329 + + + Load PSBT from clipboard… + + 331 + + + Open &URI… + + 345 + + + Close Wallet… + + 353 + + + Create Wallet… + + 356 + + + Close All Wallets… + + 360 + + &File &File

457

- + &Settings &Settings

475

- + &Help &Help

536

- + Tabs toolbar Tabs toolbar

547

- + + Syncing Headers (%1%)… + + 947 + + + Synchronizing with network… + + 993 + + + Indexing blocks on disk… + + 998 + + + Processing blocks on disk… + + 1000 + + + Reindexing blocks on disk… + + 1004 + + + Connecting to peers… + + 1010 + + Request payments (generates QR codes and bitcoin: URIs)

266

- + Show the list of used sending addresses and labels

341

- + Show the list of used receiving addresses and labels

343

- + &Command-line options

363

918 - + %n active connection(s) to Bitcoin network %n active connection to Bitcoin network - + %n active connection(s) to Bitcoin network %n active connections to Bitcoin network - - Indexing blocks on disk... - - 998 - - - Processing blocks on disk... - - 1000 - 1019 - + Processed %n block(s) of transaction history. Processed %n block of transaction history. - + Processed %n block(s) of transaction history. Processed %n blocks of transaction history. - + %1 behind %1 behind

1042

- + + Catching up… + + 1047 + + Last received block was generated %1 ago. Last received block was generated %1 ago.

1066

- + Transactions after this will not yet be visible. Transactions after this will not yet be visible.

1068

- + Error Error

1093

- + Warning Warning

1097

- + Information Information

1101

- + Up to date Up to date

1023

- - &Load PSBT from file... - - 329 - - + Load Partially Signed Bitcoin Transaction

330

- - Load PSBT from clipboard... - - 331 - - + Load Partially Signed Bitcoin Transaction from clipboard

332

- + Node window

334

- + Open node debugging and diagnostic console

335

- + &Sending addresses

340

- + &Receiving addresses

342

- + Open a bitcoin: URI

346

- + Open Wallet

348

- + Open a wallet

350

- - Close Wallet... - - 353 - - + Close wallet

354

- - Close All Wallets... - - 360 - - + Close all wallets

361

- + Show the %1 help message to get a list with possible Bitcoin command-line options

365

- + &Mask values

367

- + Mask the values in the Overview tab

369

- + default wallet

401

- + No wallets available

422

- + &Window &Window

486

- + Minimize

488

- + Zoom

498

- + Main Window

516

- + %1 client

761

- - Connecting to peers... - - 1010 - - - Catching up... - Catching up... - 1047 - - + Error: %1

1094

- + Warning: %1

1098

- + Date: %1

1198

- + Amount: %1

1199

- + Wallet: %1

1201

- + Type: %1

1203

- + Label: %1

1205

- + Address: %1

1207

- + Sent transaction Sent transaction

1208

- + Incoming transaction Incoming transaction

1208

- + HD key generation is enabled

1260

- + HD key generation is disabled

1260

- + Private key disabled

1260

- + Wallet is encrypted and currently unlocked Wallet is encrypted and currently unlocked

1279

- + Wallet is encrypted and currently locked Wallet is encrypted and currently locked

1287

- + Original message:

1408

- + Unit to show amounts in. Click to select another unit. 1448 @@ -903,87 +908,87 @@ Signing is only possible with addresses of the type 'legacy'. - + Coin Selection

- + Quantity:

- + Bytes:

- + Amount:

122

- + Fee:

202

- + Dust:

154

- + After Fee:

247

- + Change:

279

- + (un)select all

335

- + Tree mode

351

- + List mode

364

- + Amount Amount

420

- + Received with label

425

- + Received with address

430

- + Date Date

435

- + Confirmations

440

- + Confirmed Confirmed 443 @@ -992,172 +997,172 @@ Signing is only possible with addresses of the type 'legacy'. - - Copy address - - 54 -

- Copy label + Copy address

- Copy amount + Copy label 56 - 82

- Copy transaction ID + Copy amount 57 + 66

- Lock unspent + Copy transaction ID

- Unlock unspent + Lock unspent - 59 + 60

- Copy quantity + Unlock unspent - 81 + 61

- Copy fee + Copy quantity - 83 + 65

- Copy after fee + Copy fee - 84 + 67

- Copy bytes + Copy after fee - 85 + 68

- Copy dust + Copy bytes - 86 + 69

- Copy change + Copy dust - 87 + 70

- (%1 locked) + Copy change - 389 + 71

- yes + (%1 locked) - 544 + 373

- no + yes - 544 + 528

- This label turns red if any recipient receives an amount smaller than the current dust threshold. + no - 558 + 528

- Can vary +/- %1 satoshi(s) per input. + This label turns red if any recipient receives an amount smaller than the current dust threshold. - 563 + 542

- (no label) + Can vary +/- %1 satoshi(s) per input. - 601 - 655 + 547

- change from %1 (%2) + (no label) - 648 + 585 + 639

+ change from %1 (%2) + + 632 + + (change) - 649 + 633 - - Creating Wallet %1... + + Creating Wallet %1…

250

- + Create wallet failed

278

- + Create wallet warning

280

- + Open wallet failed

319

- + Open wallet warning

321

- + default wallet

331

- - Opening Wallet %1... + + Opening Wallet %1…

333

- + Close wallet

- + Are you sure you wish to close the wallet %1?

- + Closing the wallet for too long can result in having to resync the entire chain if pruning is enabled.

- + Close all wallets

101

- + Are you sure you wish to close all wallets? 102 @@ -1166,62 +1171,62 @@ Signing is only possible with addresses of the type 'legacy'. - + Create Wallet

- + Wallet Name

- + Wallet

- + Encrypt the wallet. The wallet will be encrypted with a passphrase of your choice.

- + Encrypt Wallet

- + Advanced Options

- + Disable private keys for this wallet. Wallets with private keys disabled will have no private keys and cannot have an HD seed or imported private keys. This is ideal for watch-only wallets.

- + Disable Private Keys

- + Make a blank wallet. Blank wallets do not initially have private keys or scripts. Private keys and addresses can be imported, or an HD seed can be set, at a later time.

- + Make Blank Wallet

- + Use descriptors for scriptPubKey management

105

- + Descriptor Wallet 108 @@ -1230,12 +1235,12 @@ Signing is only possible with addresses of the type 'legacy'. - + Create

- + Compiled without sqlite support (required for descriptor wallets) 63 @@ -1244,27 +1249,27 @@ Signing is only possible with addresses of the type 'legacy'. - + Edit Address Edit Address

- + &Label &Label

- + The label associated with this address list entry

- + The address associated with this address list entry. This can only be modified for sending addresses.

- + &Address &Address 42 @@ -1273,42 +1278,42 @@ Signing is only possible with addresses of the type 'legacy'. - + New sending address

- + Edit receiving address

- + Edit sending address

- + The entered address "%1" is not a valid Bitcoin address.

113

- + Address "%1" already exists as a receiving address with label "%2" and so cannot be added as a sending address.

146

- + The entered address "%1" is already in the address book with label "%2".

151

- + Could not unlock wallet.

123

- + New key generation failed. 128 @@ -1317,133 +1322,122 @@ Signing is only possible with addresses of the type 'legacy'. - + A new data directory will be created. A new data directory will be created. - 72 + 73 - + name name - 94 + 95 - + Directory already exists. Add %1 if you intend to create a new directory here. Directory already exists. Add %1 if you intend to create a new directory here. - 96 + 97 - + Path already exists, and is not a directory. Path already exists, and is not a directory. - 99 + 100 - + Cannot create data directory here. Cannot create data directory here. - 106 + 107 - + Bitcoin Bitcoin - 138 - - - Discard blocks after verification, except most recent %1 GB (prune) - - 146 + 139

- At least %1 GB of data will be stored in this directory, and it will grow over time. + %1 GB of free space available - 358 + 301

- Approximately %1 GB of data will be stored in this directory. + (of %1 GB needed) - 361 + 303

- %1 will download and store a copy of the Bitcoin block chain. + (%1 GB needed for full chain) - 365 + 306

- The wallet will also be stored in this directory. + At least %1 GB of data will be stored in this directory, and it will grow over time. - 367 + 378

- Error: Specified data directory "%1" cannot be created. + Approximately %1 GB of data will be stored in this directory. - 230 - - - Error - Error - 260 + 381 - 281 - - %n GB of free space available - %n GB of free space available - - - %n GB of free space available - %n GB of free space available - - - - 283 - - (of %n GB needed) - (of %n GB needed) - - - (of %n GB needed) - (of %n GB needed) - - - - 286 - - (%n GB needed for full chain) + 388 + block chain pruning + + (sufficient to restore backups %n day(s) old) - - (%n GB needed for full chain) + + (sufficient to restore backups %n day(s) old) + + %1 will download and store a copy of the Bitcoin block chain. + + 390 + + + The wallet will also be stored in this directory. + + 392 + + + Error: Specified data directory "%1" cannot be created. + + 250 + + + Error + Error + 280 + - + version version

- + About %1

- + Command-line options

- - %1 is shutting down... + + %1 is shutting down…

145

- + Do not shut down the computer until this window disappears. 146 @@ -1452,47 +1446,57 @@ Signing is only possible with addresses of the type 'legacy'. - + Welcome Welcome

- + Welcome to %1.

- + As this is the first time the program is launched, you can choose where %1 will store its data.

- + When you click OK, %1 will begin to download and process the full %4 block chain (%2GB) starting with the earliest transactions in %3 when %4 initially launched.

206

- + + Limit block chain storage to + + 238 + + Reverting this setting requires re-downloading the entire blockchain. It is faster to download the full chain first and prune it later. Disables some advanced features. - 216 + 241 - + + GB + + 248 + + This initial synchronisation is very demanding, and may expose hardware problems with your computer that had previously gone unnoticed. Each time you run %1, it will continue downloading where it left off. - 226 + 216 - + If you have chosen to limit block chain storage (pruning), the historical data must still be downloaded and processed, but will be deleted afterward to keep your disk usage low. - 236 + 226 - + Use the default data directory Use the default data directory

- + Use a custom data directory: Use a custom data directory: 73 @@ -1501,86 +1505,86 @@ Signing is only possible with addresses of the type 'legacy'. - + Form Form

- + Recent transactions may not yet be visible, and therefore your wallet's balance might be incorrect. This information will be correct once your wallet has finished synchronizing with the bitcoin network, as detailed below.

133

- + Attempting to spend bitcoins that are affected by not-yet-displayed transactions will not be accepted by the network.

152

- + Number of blocks left

215

- - Unknown... + + Unknown…

222

248 - ../modaloverlay.cpp153 + ../modaloverlay.cpp152 - + + calculating… + + 292 + 312 + + Last block time Last block time

235

- + Progress

261

- + Progress increase per hour - 295 - - - calculating... - - 302 - 322 + 285 - + Estimated time left until synced - 315 + 305 - + Hide - 352 + 342 - + Esc - 355 + 345 - + %1 is currently syncing. It will download headers and blocks from peers and validate them until reaching the tip of the block chain.

- - Unknown. Syncing Headers (%1, %2%)... + + Unknown. Syncing Headers (%1, %2%)… - 159 + 158 - + unknown 123 @@ -1589,12 +1593,12 @@ Signing is only possible with addresses of the type 'legacy'. - + Open bitcoin URI

- + URI: 22 @@ -1603,331 +1607,331 @@ Signing is only possible with addresses of the type 'legacy'. - + Options Options

- + &Main &Main

- + Automatically start %1 after logging in to the system.

- + &Start %1 on system login

- + Enabling pruning significantly reduces the disk space required to store transactions. All blocks are still fully validated. Reverting this setting requires re-downloading the entire blockchain.

- + Size of &database cache

108

- + Number of script &verification threads

151

- + IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1)

322

509

- + Shows if the supplied default SOCKS5 proxy is used to reach peers via this network type.

391

414

437

- + Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Exit in the menu.

606

- + Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |.

686

699

- + Open the %1 configuration file from the working directory.

878

- + Open Configuration File

881

- + Reset all client options to default. Reset all client options to default.

891

- + &Reset Options &Reset Options

894

- + &Network &Network

249

- + Prune &block storage to

- + GB

- + Reverting this setting requires re-downloading the entire blockchain.

- + MiB

124

- + (0 = auto, <0 = leave that many cores free)

164

- + W&allet

200

- + Expert

206

- + Enable coin &control features

215

- + If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed.

222

- + &Spend unconfirmed change

225

- + Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled. Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled.

255

- + Map port using &UPnP Map port using &UPnP

258

- + Automatically open the Bitcoin client port on the router. This only works when your router supports NAT-PMP and it is enabled. The external port could be random.

265

- + Map port using NA&T-PMP

268

- + Accept connections from outside.

275

- + Allow incomin&g connections

278

- + Connect to the Bitcoin network through a SOCKS5 proxy.

285

- + &Connect through SOCKS5 proxy (default proxy):

288

- + Proxy &IP: Proxy &IP:

297

484

- + &Port: &Port:

329

516

- + Port of the proxy (e.g. 9050) Port of the proxy (e.g. 9050)

354

541

- + Used for reaching peers via:

378

- + IPv4

401

- + IPv6

424

- + Tor

447

- + &Window &Window

577

- + Show the icon in the system tray.

583

- + &Show tray icon

586

- + Show only a tray icon after minimizing the window. Show only a tray icon after minimizing the window.

596

- + &Minimize to the tray instead of the taskbar &Minimize to the tray instead of the taskbar

599

- + M&inimize on close M&inimize on close

609

- + &Display &Display

630

- + User Interface &language: User Interface &language:

638

- + The user interface language can be set here. This setting will take effect after restarting %1.

651

- + &Unit to show amounts in: &Unit to show amounts in:

662

- + Choose the default subdivision unit to show in the interface and when sending coins. Choose the default subdivision unit to show in the interface and when sending coins.

675

- + Whether to show coin control features or not.

212

- + Connect to the Bitcoin network through a separate SOCKS5 proxy for Tor onion services.

472

- + Use separate SOCKS&5 proxy to reach peers via Tor onion services:

475

- + &Third party transaction URLs

689

- + Monospaced font in the Overview tab:

711

- + embedded "%1"

719

- + 111.11111111 BTC

741

790

- + 909.09090909 BTC

748

797

- + closest matching "%1"

768

- + Options set in this dialog are overridden by the command line or in the configuration file:

833

- + &OK &OK

974

- + &Cancel &Cancel 987 @@ -1936,58 +1940,58 @@ Signing is only possible with addresses of the type 'legacy'. - + default default

104

- + none

185

- + Confirm options reset Confirm options reset

276

- + Client restart required to activate changes.

277

334

- + Client will be shut down. Do you want to proceed?

277

- + Configuration options

292

- + The configuration file is used to specify advanced user options which override GUI settings. Additionally, any command-line options will override this configuration file.

293

- + Error Error

298

- + The configuration file could not be opened.

298

- + This change would require a client restart.

338

- + The supplied proxy address is invalid. The supplied proxy address is invalid. 366 @@ -1996,93 +2000,93 @@ Signing is only possible with addresses of the type 'legacy'. - + Form Form

- + The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet. The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet.

411

- + Watch-only:

284

- + Available:

294

- + Your current spendable balance Your current spendable balance

304

- + Pending:

339

- + Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance

139

- + Immature: Immature:

239

- + Mined balance that has not yet matured Mined balance that has not yet matured

210

- + Balances

- + Total: Total:

200

- + Your current total balance Your current total balance

249

- + Your current balance in watch-only addresses

323

- + Spendable:

346

- + Recent transactions

395

- + Unconfirmed transactions to watch-only addresses

120

- + Mined balance in watch-only addresses that has not yet matured

158

- + Current total balance in watch-only addresses 268 @@ -2091,7 +2095,7 @@ Signing is only possible with addresses of the type 'legacy'. - + Privacy mode activated for the Overview tab. To unmask the values, uncheck Settings->Mask values. 191 @@ -2100,32 +2104,32 @@ Signing is only possible with addresses of the type 'legacy'. - + Dialog

- + Sign Tx

- + Broadcast Tx

102

- + Copy to Clipboard

122

- - Save... + + Save…

129

- + Close 136 @@ -2134,123 +2138,123 @@ Signing is only possible with addresses of the type 'legacy'. - + Failed to load transaction: %1

- + Failed to sign transaction: %1

- + Could not sign any more inputs.

- + Signed %1 inputs, but more signatures are still required.

- + Signed transaction successfully. Transaction is ready to broadcast.

- + Unknown error processing transaction.

- + Transaction broadcast successfully! Transaction ID: %1

108

- + Transaction broadcast failed: %1

111

- + PSBT copied to clipboard.

120

- + Save Transaction Data

143

- + Partially Signed Transaction (Binary)

144

Name of binary PSBT file format

- + PSBT saved to disk.

151

- + * Sends %1 to %2

167

- + Unable to calculate transaction fee or total transaction amount.

177

- + Pays transaction fee:

179

- + Total Amount

191

- + or

194

- + Transaction has %1 unsigned inputs.

200

- + Transaction is missing some information about inputs.

242

- + Transaction still needs signature(s).

246

- + (But this wallet cannot sign transactions.)

249

- + (But this wallet does not have the right keys.)

252

- + Transaction is fully signed and ready for broadcast.

260

- + Transaction status is unknown. 264 @@ -2259,101 +2263,96 @@ Signing is only possible with addresses of the type 'legacy'. - + Payment request error

173

- + Cannot start bitcoin: click-to-pay handler

174

- + URI handling 224 - 237 - 243 - 250 + 240 + 246 + 253 - + 'bitcoin://' is not a valid URI. Use 'bitcoin:' instead.

224

- + Cannot process payment request because BIP70 is not supported. Due to widespread security flaws in BIP70 it's strongly recommended that any merchant instructions to switch wallets be ignored. If you are receiving this error you should request the merchant provide a BIP21 compatible URI. - 238 - 261 - - - Invalid payment address %1 - - 243 + 241 + 264 - + URI cannot be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters. - 251 + 254 - + Payment request file handling - 260 + 263 - + User Agent - 91 + 77 - + Ping - 91 + 77 - + Sent - 91 + 77 - + Received - 91 + 77 - + Peer Id - 91 + 77 - + Address - 91 + 77 - + Type - 91 + 77 - + Network Network - 91 + 77 - + Amount Amount 213 @@ -2362,229 +2361,229 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Enter a Bitcoin address (e.g. %1)

118

- + Unroutable - 650 + 653 - + Internal - 656 + 659 - + Inbound - 666 + 669 - + Outbound - 666 + 669 - + Full Relay - 670 + 673 - + Block Relay - 671 + 674 - + Manual - 672 + 675 - + Feeler - 673 + 676 - + Address Fetch - 674 + 677 - + %1 d - 688 + 691 - + %1 h - 690 + 693 - + %1 m - 692 + 695 - + %1 s - 694 - 722 + 697 + 725 - + None - 710 + 713 - + N/A N/A - 716 + 719 - + %1 ms - 717 + 720 - 735 - + 738 + %n second(s) %n second - + %n second(s) %n seconds - 739 - + 742 + %n minute(s) %n minute - + %n minute(s) %n minutes - 743 - + 746 + %n hour(s) %n hour - + %n hour(s) %n hours - 747 - + 750 + %n day(s) %n day - + %n day(s) %n days - 751 - 757 - + 754 + 760 + %n week(s) %n week - + %n week(s) %n weeks - + %1 and %2 - 757 + 760 - 757 - + 760 + %n year(s) %n year - + %n year(s) %n years - + %1 B - 765 + 768 - + %1 kB - 767 + 770 - + %1 MB - 769 + 772 - + %1 GB - 771 + 774 - - &Save Image... + + Save Image…

- - &Copy Image + + Copy Image - 33 + 31 - + Resulting URI too long, try to reduce the text for label / message. - 46 + 42 - + Error encoding URI into QR Code. - 53 + 49 - + QR code support not available. - 94 + 90 - + Save QR Code - 124 + 120 - + PNG Image - 125 + 121

Name of PNG file format

- + N/A N/A 75 @@ -2598,347 +2597,347 @@ If you are receiving this error you should request the merchant provide a BIP21 300

336

359 - 1069 - 1095 - 1121 - 1144 - 1167 - 1190 - 1216 - 1242 - 1265 - 1288 - 1311 - 1334 - 1360 - 1386 - 1409 - 1432 - 1455 - 1478 - 1501 - 1527 - 1550 - 1573 - 1599 - ../rpcconsole.h141 - - + 1081 + 1107 + 1133 + 1156 + 1179 + 1202 + 1231 + 1257 + 1280 + 1303 + 1326 + 1349 + 1375 + 1401 + 1424 + 1447 + 1470 + 1493 + 1516 + 1542 + 1565 + 1588 + 1614 + ../rpcconsole.h137 + + Client version Client version

- + &Information &Information

- + General

- + Datadir

114

- + To specify a non-default location of the data directory use the '%1' option.

124

- + Blocksdir

143

- + To specify a non-default location of the blocks directory use the '%1' option.

153

- + Startup time Startup time

172

- + Network Network 201 - 1111 + 1123 - + Name

208

- + Number of connections Number of connections

231

- + Block chain Block chain

260

- + Memory Pool

319

- + Current number of transactions

326

- + Memory usage

349

- + Wallet:

443

- + (none)

454

- + &Reset

695

- + Received 775 - 1468 + 1483 - + Sent 855 - 1445 + 1460 - + &Peers

896

- + Banned peers - 963 + 972 - + Select a peer to view detailed information. - 1028 - ../rpcconsole.cpp1104 + 1040 + ../rpcconsole.cpp1033 - + Version - 1134 + 1146 - + Starting Block - 1255 + 1270 - + Synced Headers - 1278 + 1293 - + Synced Blocks - 1301 + 1316 - + The mapped Autonomous System used for diversifying peer selection. - 1586 + 1601 - + Mapped AS - 1589 + 1604 - + User Agent 88 - 1157 + 1169 - + Node window

- + Current block height

267

- + Open the %1 debug log file from the current data directory. This can take a few seconds for large log files.

397

- + Decrease font size

481

- + Increase font size

513

- + Permissions - 1059 + 1071 - + The direction and type of peer connection: %1 - 1082 + 1094 - + Direction/Type - 1085 + 1097 - + The network protocol this peer is connected through: IPv4, IPv6, Onion, I2P, or CJDNS. - 1108 + 1120 - + Services - 1180 + 1192 - + Whether the peer requested us to relay transactions. - 1203 + 1218 - + Wants Tx Relay - 1206 + 1221 - + High bandwidth BIP152 compact block relay: %1 - 1229 + 1244 - + High Bandwidth - 1232 + 1247 - + Connection Time - 1324 + 1339 - + Elapsed time since a novel block passing initial validity checks was received from this peer. - 1347 + 1362 - + Last Block - 1350 + 1365 - + Elapsed time since a novel transaction accepted into our mempool was received from this peer. - 1373 + 1388 - + Last Tx - 1376 + 1391 - + Last Send - 1399 + 1414 - + Last Receive - 1422 + 1437 - + Ping Time - 1491 + 1506 - + The duration of a currently outstanding ping. - 1514 + 1529 - + Ping Wait - 1517 + 1532 - + Min Ping - 1540 + 1555 - + Time Offset - 1563 + 1578 - + Last block time Last block time

290

- + &Open &Open

400

- + &Console &Console

426

- + &Network Traffic

643

- + Totals

711

- + Debug log file Debug log file

390

- + Clear console Clear console 545 @@ -2947,276 +2946,276 @@ If you are receiving this error you should request the merchant provide a BIP21 - - In: - - 862 - - - Out: - - 863 -

- 1 &hour + In: - 621 + 852

- 1 &day + Out: - 622 + 853

- 1 &week + Inbound: initiated by peer - 623 + 474

- 1 &year + Outbound Full Relay: default - 624 + 475

- &Disconnect + Outbound Block Relay: does not relay transactions or addresses - 620 + 476

- Inbound: initiated by peer + Outbound Manual: added using RPC %1 or %2/%3 configuration options - 465 + 477

- Outbound Full Relay: default + Outbound Feeler: short-lived, for testing addresses - 466 + 481

- Outbound Block Relay: does not relay transactions or addresses + Outbound Address Fetch: short-lived, for soliciting addresses - 467 + 482

- Outbound Manual: added using RPC %1 or %2/%3 configuration options + we selected the peer for high bandwidth relay - 468 + 486

- Outbound Feeler: short-lived, for testing addresses + the peer selected us for high bandwidth relay - 472 + 487

- Outbound Address Fetch: short-lived, for soliciting addresses + no high bandwidth relay selected - 473 + 488

- we selected the peer for high bandwidth relay + Welcome to the %1 RPC console. - 477 + 815

- the peer selected us for high bandwidth relay + Use up and down arrows to navigate history, and %1 to clear screen. - 478 + 816

- no high bandwidth relay selected + Type %1 for an overview of available commands. - 479 + 817

- &Unban + For more information on using this console type %1. - 661 + 818

- Welcome to the %1 RPC console. + WARNING: Scammers have been active, telling users to type commands here, stealing their wallet contents. Do not use this console without fully understanding the ramifications of a command. - 825 + 820

- Use up and down arrows to navigate history, and %1 to clear screen. + Network activity disabled - 826 + 856

- Type %1 for an overview of available commands. + Executing command without any wallet - 827 + 922

- For more information on using this console type %1. + (peer id: %1) - 828 + 1039

- WARNING: Scammers have been active, telling users to type commands here, stealing their wallet contents. Do not use this console without fully understanding the ramifications of a command. + Executing command using "%1" wallet - 830 + 920

- Network activity disabled + Disconnect - 866 + 640

- Executing command without any wallet + 1 hour - 932 + 641

- (peer id: %1) + 1 day - 1110 + 642

- Executing command using "%1" wallet + 1 week - 930 + 643

+ 1 year + + 644 + + + Unban + + 663 + + via %1 - 1112 + 1041 - + Yes - 140 + 136 - + No - 140 + 136 - + To - 140 + 136 - + From - 140 + 136 - + Ban for - 141 + 137 - + Never - 178 + 174 - + Unknown - 141 + 137 - + &Amount:

- + &Label: &Label:

- + &Message:

- + An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network.

- + An optional label to associate with the new receiving address.

- + Use this form to request payments. All fields are optional.

- + An optional amount to request. Leave this empty or zero to not request a specific amount.

193

- + An optional label to associate with the new receiving address (used by you to identify an invoice). It is also attached to the payment request.

- + An optional message that is attached to the payment request and may be displayed to the sender.

- + &Create new receiving address

111

- + Clear all fields of the form.

134

- + Clear

137

- + Native segwit addresses (aka Bech32 or BIP-173) reduce your transaction fees later on and offer better protection against typos, but old wallets don't support them. When unchecked, an address compatible with older wallets will be created instead.

215

- + Generate native segwit (Bech32) address

218

- + Requested payments history

279

- + Show the selected request (does the same as double clicking an entry)

304

- + Show

307

- + Remove the selected entries from the list

324

- + Remove 327 @@ -3225,91 +3224,91 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Copy URI - 46 + 47 - + Copy address - 47 + 48 - + Copy label - 48 + 49 - + Copy message - 49 + 50 - + Copy amount - 50 + 51 - + Could not unlock wallet. - 190 + 176 - + Could not generate new %1 address - 195 + 181 - - Request payment to ... + + Request payment to …

- + Address:

- + Amount:

119

- + Label:

148

- + Message:

180

- + Wallet:

212

- + Copy &URI

240

- + Copy &Address

250

- - &Save Image... + + &Save Image…

260

- + Payment information 39 @@ -3318,7 +3317,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Request payment to %1 49 @@ -3327,37 +3326,37 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Date Date

- + Label

- + Message

- + (no label)

- + (no message)

- + (no amount requested)

- + Requested 127 @@ -3366,82 +3365,72 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Send Coins Send Coins

../sendcoinsdialog.cpp673

- + Coin Control Features

- - Inputs... - - 110 - - + automatically selected

120

- + Insufficient funds!

139

- + Quantity:

228

- + Bytes:

263

- + Amount:

311

- + Fee:

391

- + After Fee:

442

- + Change:

474

- + If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address.

518

- + Custom change address

521

- + Transaction Fee:

727

- - Choose... - - 741 -

Using the fallbackfee can result in sending a transaction that will take several hours or days (or never) to confirm. Consider choosing your fee manually or wait until you have validated the complete chain. @@ -3453,103 +3442,113 @@ If you are receiving this error you should request the merchant provide a BIP21 774

- Specify a custom fee per kB (1,000 bytes) of the transaction's virtual size. - -Note: Since the fee is calculated on a per-byte basis, a fee of "100 satoshis per kB" for a transaction size of 500 bytes (half of 1 kB) would ultimately yield a fee of only 50 satoshis. - - 851 - - per kilobyte

856

- + Hide

803

- + Recommended:

915

- + Custom:

945

- - (Smart fee not initialized yet. This usually takes a few blocks...) - - 994 - - + Send to multiple recipients at once Send to multiple recipients at once

1160

- + Add &Recipient Add &Recipient

1163

- + Clear all fields of the form.

1143

- + + Inputs… + + 110 + + Dust:

343

+ + Choose… + + 741 +

Hide transaction fee settings

800

+ Specify a custom fee per kB (1,000 bytes) of the transaction's virtual size. + +Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 satoshis per kvB" for a transaction size of 500 virtual bytes (half of 1 kvB) would ultimately yield a fee of only 50 satoshis. + + 851 + + When there is less transaction volume than space in the blocks, miners as well as relaying nodes may enforce a minimum fee. Paying only this minimum fee is just fine, but be aware that this can result in a never confirming transaction once there is more demand for bitcoin transactions than the network can process.

886

- + A too low fee might result in a never confirming transaction (read the tooltip)

889

- + + (Smart fee not initialized yet. This usually takes a few blocks…) + + 994 + + Confirmation time target:

1020

- + Enable Replace-By-Fee

1078

- + With Replace-By-Fee (BIP-125) you can increase a transaction's fee after it is sent. Without this, a higher fee may be recommended to compensate for increased transaction delay risk.

1081

- + Clear &All Clear &All

1146

- + Balance: Balance:

1201

- + Confirm the send action Confirm the send action

1117

- + S&end S&end 1120 @@ -3558,344 +3557,344 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos - + Copy quantity

- + Copy amount

- + Copy fee

- + Copy after fee

- + Copy bytes

- + Copy dust

- + Copy change

- + %1 (%2 blocks)

174

- + Cr&eate Unsigned

203

- + Creates a Partially Signed Bitcoin Transaction (PSBT) for use with e.g. an offline %1 wallet, or a PSBT-compatible hardware wallet.

204

- + from wallet '%1'

294

- + %1 to '%2'

305

- + %1 to %2

310

- + Do you want to draft this transaction?

317

- + Are you sure you want to send?

319

- + + To review recipient list click "Show Details…" + + 371 + + Create Unsigned

390

- + Save Transaction Data

434

- + PSBT saved

442

- + or

367

- + You can increase the fee later (signals Replace-By-Fee, BIP-125).

348

- + Please, review your transaction proposal. This will produce a Partially Signed Bitcoin Transaction (PSBT) which you can save or copy and then sign with e.g. an offline %1 wallet, or a PSBT-compatible hardware wallet.

324

- + Please, review your transaction.

326

- + Transaction fee

334

- + Not signalling Replace-By-Fee, BIP-125.

350

- + Total Amount

364

- - To review recipient list click "Show Details..." - - 371 - - + Confirm send coins

389

- + Confirm transaction proposal

389

- + Send

390

- + Partially Signed Transaction (Binary)

435

Name of binary PSBT file format

- + Watch-only balance:

618

- + The recipient address is not valid. Please recheck.

642

- + The amount to pay must be larger than 0.

645

- + The amount exceeds your balance.

648

- + The total exceeds your balance when the %1 transaction fee is included.

651

- + Duplicate address found: addresses should only be used once each.

654

- + Transaction creation failed!

657

- + A fee higher than %1 is considered an absurdly high fee.

661

- + Payment request expired.

664

788 - + Estimated to begin confirmation within %n block(s). Estimated to begin confirmation within %n block. - + Estimated to begin confirmation within %n block(s). Estimated to begin confirmation within %n blocks. - + Warning: Invalid Bitcoin address - 888 + 889 - + Warning: Unknown change address - 893 + 894 - + Confirm custom change address - 896 + 897 - + The address you selected for change is not part of this wallet. Any or all funds in your wallet may be sent to this address. Are you sure? - 896 + 897 - + (no label) - 917 + 918 - + A&mount: A&mount:

155

705

1238

- + Pay &To: Pay &To:

- + &Label: &Label:

132

- + Choose previously used address

- + The Bitcoin address to send the payment to

- + Alt+A Alt+A

- + Paste address from clipboard Paste address from clipboard

- + Alt+P Alt+P

103

- + Remove this entry

110

672

1205

- + The amount to send in the selected unit

170

- + The fee will be deducted from the amount being sent. The recipient will receive less bitcoins than you enter in the amount field. If multiple recipients are selected, the fee is split equally.

177

- + S&ubtract fee from amount

180

- + Use available balance

187

- + Message:

196

- + This is an unauthenticated payment request.

639

- + This is an authenticated payment request.

1168

- + Enter a label for this address to add it to the list of used addresses

145

148

- + A message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network.

206

- + Pay To:

654

1183

- + Memo: 688 @@ -3905,128 +3904,128 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos - + Signatures - Sign / Verify a Message Signatures - Sign / Verify a Message

- + &Sign Message &Sign Message

- + You can sign messages/agreements with your addresses to prove you can receive bitcoins sent to them. Be careful not to sign anything vague or random, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to.

- + The Bitcoin address to sign the message with

- + Choose previously used address

274

- + Alt+A Alt+A

284

- + Paste address from clipboard Paste address from clipboard

- + Alt+P Alt+P

- + Enter the message you want to sign here Enter the message you want to sign here

100

103

- + Signature Signature

110

- + Copy the current signature to the system clipboard Copy the current signature to the system clipboard

140

- + Sign the message to prove you own this Bitcoin address Sign the message to prove you own this Bitcoin address

161

- + Sign &Message Sign &Message

164

- + Reset all sign message fields Reset all sign message fields

178

- + Clear &All Clear &All

181

338

- + &Verify Message &Verify Message

240

- + Enter the receiver's address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Note that this only proves the signing party receives with the address, it cannot prove sendership of any transaction!

246

- + The Bitcoin address the message was signed with

267

- + The signed message to verify

296

299

- + The signature given when the message was signed

306

309

- + Verify the message to ensure it was signed with the specified Bitcoin address Verify the message to ensure it was signed with the specified Bitcoin address

318

- + Verify &Message Verify &Message

321

- + Reset all verify message fields Reset all verify message fields

335

- + Click "Sign Message" to generate signature 125 @@ -4035,13 +4034,13 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos - + The entered address is invalid.

120

219

- + Please check the address and try again. 120 @@ -4049,59 +4048,59 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos 220

227

- + The entered address does not refer to a key.

127

226

- + Wallet unlock was cancelled.

135

- + No error

146

- + Private key for the entered address is not available.

149

- + Message signing failed.

152

- + Message signed.

164

- + The signature could not be decoded.

233

- + Please check the signature and try again.

234

241

- + The signature did not match the message digest.

240

- + Message verification failed.

246

- + Message verified. 214 @@ -4110,7 +4109,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos - + kB/s 82 @@ -4121,111 +4120,111 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos 34 - + Open for %n more block(s) Open for %n more block - + Open for %n more block(s) Open for %n more blocks - + Open until %1

- + conflicted with a transaction with %1 confirmations

- + 0/unconfirmed, %1

- + in memory pool

- + not in memory pool

- + abandoned

- + %1/unconfirmed

- + %1 confirmations

- + Status

- + Date Date

101

- + Source

108

- + Generated

108

- + From

113

127

199

- + unknown

127

- + To

128

148

218

- + own address

130

- + watch-only

130

199

- + label

132

- + Credit 168 @@ -4236,120 +4235,120 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos 170 - + matures in %n more block(s) matures in %n more block - + matures in %n more block(s) matures in %n more blocks - + not accepted

172

- + Debit

232

258

321

- + Total debit

242

- + Total credit

243

- + Transaction fee

248

- + Net amount

270

- + Message

276

288

- + Comment

278

- + Transaction ID

280

- + Transaction total size

281

- + Transaction virtual size

282

- + Output index

283

- + (Certificate was not verified)

299

- + Merchant

302

- + Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.

310

- + Debug information

318

- + Transaction

326

- + Inputs

329

- + Amount Amount

350

- + true

351

352

- + false 351 @@ -4359,7 +4358,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos - + This pane shows a detailed description of the transaction This pane shows a detailed description of the transaction 20 @@ -4368,7 +4367,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos - + Details for %1 18 @@ -4377,138 +4376,138 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos - + Date Date

252

- + Type

252

- + Label

252

314 - + Open for %n more block(s) Open for %n more block - + Open for %n more block(s) Open for %n more blocks - + Open until %1

317

- + Unconfirmed

320

- + Abandoned

323

- + Confirming (%1 of %2 recommended confirmations)

326

- + Confirmed (%1 confirmations)

329

- + Conflicted

332

- + Immature (%1 confirmations, will be available after %2)

335

- + Generated but not accepted

338

- + Received with

377

- + Received from

379

- + Sent to

382

- + Payment to yourself

384

- + Mined

386

- + watch-only

414

- + (n/a)

430

- + (no label)

640

- + Transaction status. Hover over this field to show number of confirmations.

679

- + Date and time that the transaction was received.

681

- + Type of transaction.

683

- + Whether or not a watch-only address is involved in this transaction.

685

- + User-defined intent/purpose of the transaction.

687

- + Amount removed from or added to balance. 689 @@ -4517,215 +4516,215 @@ Note: Since the fee is calculated on a per-byte basis, a fee of "100 satos - + All

- + Today

- + This week

- + This month

- + Last month

- + This year

- - Range... - - 76 - - + Received with

- + Sent to

- + To yourself

- + Mined

- + Other

- + Enter address, transaction id, or label to search

- + Min amount

102

- + Abandon transaction - 165 + 177 - + Increase transaction fee - 166 + 174 - + Copy address - 168 + 166 - + Copy label - 169 + 167 - + Copy amount - 170 + 168 - + Copy transaction ID - 171 + 169 - + Copy raw transaction - 172 + 170 - + Copy full transaction details - 173 + 171 - + Edit address label - 174 + 178 - + Comma separated file - 360 + 339

Name of CSV file format

- + Show transaction details - 175 + 172 - + + Range… + + 76 + + Export Transaction History - 359 + 338 - + Confirmed Confirmed - 369 + 348 - + Watch-only - 371 + 350 - + Date Date - 372 + 351 - + Type - 373 + 352 - + Label - 374 + 353 - + Address - 375 + 354 - + ID - 377 + 356 - + Exporting Failed - 380 + 359 - + There was an error trying to save the transaction history to %1. - 380 + 359 - + Exporting Successful - 384 + 363 - + The transaction history was successfully saved to %1. - 384 + 363 - + Range: - 556 + 535 - + to - 564 + 543 - + No wallet has been loaded. Go to File > Open Wallet to load a wallet. - OR -

- + Create a new wallet 44 @@ -4734,12 +4733,12 @@ Go to File > Open Wallet to load a wallet. - + Send Coins Send Coins

218

- + Fee bump error 497 @@ -4747,67 +4746,67 @@ Go to File > Open Wallet to load a wallet. 562

567

- + Increasing transaction fee failed

497

- + Do you want to increase the fee?

505

- + Do you want to draft a transaction with fee increase?

505

- + Current fee:

509

- + Increase:

513

- + New fee:

517

- + Warning: This may pay the additional fee by reducing change outputs or adding inputs, when necessary. It may add a new change output if one does not already exist. These changes may potentially leak privacy.

525

- + Confirm fee bump

528

- + Can't draft transaction.

549

- + PSBT copied

556

- + Can't sign transaction.

562

- + Could not commit transaction

567

- + default wallet 587 @@ -4816,80 +4815,80 @@ Go to File > Open Wallet to load a wallet. - + &Export &Export

- + Export the data in the current tab to a file Export the data in the current tab to a file

- + Error Error

217

226

236

- + Unable to decode PSBT from clipboard (invalid base64)

217

- + Load Transaction Data

222

- + Partially Signed Transaction (*.psbt)

223

- + PSBT file must be smaller than 100 MiB

226

- + Unable to decode PSBT

236

- + Backup Wallet

275

- + Wallet Data

276

Name of wallet data file format

- + Backup Failed

282

- + There was an error trying to save the wallet data to %1.

282

- + Backup Successful

286

- + The wallet data was successfully saved to %1.

286

- + Cancel 330 @@ -4898,35 +4897,25 @@ Go to File > Open Wallet to load a wallet. - - Distributed under the MIT software license, see the accompanying file %s or %s - - 31 - - - Prune configured below the minimum of %d MiB. Please use a higher number. - - 72 -

- Prune: last wallet synchronisation goes beyond pruned data. You need to -reindex (download the whole blockchain again in case of pruned node) + The %s developers - 74 + 12

- Pruning blockstore... + %s corrupt. Try using the wallet tool bitcoin-wallet to salvage or restoring a backup. - 198 + 13

- Unable to start HTTP server. See debug log for details. + -maxtxfee is set very high! Fees this large could be paid on a single transaction. - 235 + 16

- The %s developers + Cannot downgrade wallet from version %i to version %i. Wallet version unchanged. - 12 + 19

Cannot obtain a lock on data directory %s. %s is probably already running. @@ -4939,749 +4928,759 @@ Go to File > Open Wallet to load a wallet. 24

- Error reading %s! All keys read correctly, but transaction data or address book entries might be missing or incorrect. + Cannot upgrade a non HD split wallet from version %i to version %i without upgrading to support pre-split keypool. Please use version %i or no version specified. - 34 + 27

- More than one onion bind address is provided. Using %s for the automatically created Tor onion service. + Distributed under the MIT software license, see the accompanying file %s or %s - 55 + 31

- Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly. + Error reading %s! All keys read correctly, but transaction data or address book entries might be missing or incorrect. - 66 + 34

- Please contribute if you find %s useful. Visit %s for further information about the software. + Error: Dumpfile format record is incorrect. Got "%s", expected "format". - 69 + 37

- SQLiteDatabase: Failed to prepare the statement to fetch sqlite wallet schema version: %s + Error: Dumpfile identifier record is incorrect. Got "%s", expected "%s". - 77 + 39

- SQLiteDatabase: Failed to prepare the statement to fetch the application id: %s + Error: Dumpfile version is not supported. This version of bitcoin-wallet only supports version 1 dumpfiles. Got dumpfile with version %s - 80 + 41

- SQLiteDatabase: Unknown sqlite wallet schema version %d. Only version %d is supported + Error: Listening for incoming connections failed (listen returned error %s) - 83 + 44

- The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correct + Fee estimation failed. Fallbackfee is disabled. Wait a few blocks or enable -fallbackfee. - 86 + 46

- This is a pre-release test build - use at your own risk - do not use for mining or merchant applications + File %s already exists. If you are sure this is what you want, move it out of the way first. - 97 + 49

- This is the transaction fee you may discard if change is smaller than dust at this level + Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions) - 103 + 52

- Unable to replay blocks. You will need to rebuild the database using -reindex-chainstate. + More than one onion bind address is provided. Using %s for the automatically created Tor onion service. - 114 + 55

- Unable to rewind the database to a pre-fork state. You will need to redownload the blockchain + No dump file provided. To use createfromdump, -dumpfile=<filename> must be provided. - 117 + 58

- Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade. + No dump file provided. To use dump, -dumpfile=<filename> must be provided. - 128 + 61

- -maxmempool must be at least %d MB + No wallet file format provided. To use createfromdump, -format=<format> must be provided. - 135 + 63

- Cannot resolve -%s address: '%s' + Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly. - 137 + 66

- Change index out of range + Please contribute if you find %s useful. Visit %s for further information about the software. - 140 + 69

- Config setting for %s only applied on %s network when in [%s] section. + Prune configured below the minimum of %d MiB. Please use a higher number. - 141 + 72

- Copyright (C) %i-%i + Prune: last wallet synchronisation goes beyond pruned data. You need to -reindex (download the whole blockchain again in case of pruned node) - 142 + 74 - - Corrupted block database detected - Corrupted block database detected - 143 + + SQLiteDatabase: Failed to prepare the statement to fetch sqlite wallet schema version: %s + + 77

- Could not find asmap file %s + SQLiteDatabase: Failed to prepare the statement to fetch the application id: %s - 144 + 80

- Could not parse asmap file %s + SQLiteDatabase: Unknown sqlite wallet schema version %d. Only version %d is supported - 145 + 83 - - Do you want to rebuild the block database now? - Do you want to rebuild the block database now? - 147 + + The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correct + + 86

- Dump file %s does not exist. + The transaction amount is too small to send after the fee has been deducted - 149 + 91

- Error creating %s + This error could occur if this wallet was not shutdown cleanly and was last loaded using a build with a newer version of Berkeley DB. If so, please use the software that last loaded this wallet - 150 + 93 - - Error initializing block database - Error initializing block database - 151 + + This is a pre-release test build - use at your own risk - do not use for mining or merchant applications + + 97 - - Error initializing wallet database environment %s! - Error initializing wallet database environment %s! - 152 + + This is the maximum transaction fee you pay (in addition to the normal fee) to prioritize partial spend avoidance over regular coin selection. + + 100

- Error loading %s + This is the transaction fee you may discard if change is smaller than dust at this level - 153 + 103

- Error loading %s: Private keys can only be disabled during creation + This is the transaction fee you may pay when fee estimates are not available. - 154 + 106

- Error loading %s: Wallet corrupted + Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments. - 155 + 108

- Error loading %s: Wallet requires newer version of %s + Transaction needs a change address, but we can't generate it. Please call keypoolrefill first. - 156 + 111 - - Error loading block database - Error loading block database - 157 + + Unable to replay blocks. You will need to rebuild the database using -reindex-chainstate. + + 114 - - Error opening block database - Error opening block database - 158 + + Unknown wallet file format "%s" provided. Please provide one of "bdb" or "sqlite". + + 117

- Error reading next record from wallet database + Warning: Dumpfile wallet format "%s" does not match command line specified format "%s". - 160 + 120

- Error: Couldn't create cursor into database + Warning: Private keys detected in wallet {%s} with disabled private keys - 162 + 123

- Error: Dumpfile checksum does not match. Computed %s, expected %s + Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade. - 164 + 125

- Error: Got key that was not hex: %s + Witness data for blocks after height %d requires validation. Please restart with -reindex. - 165 + 128

- Error: Got value that was not hex: %s + You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain - 166 + 131

- Error: Missing checksum + %s is set very high! - 168 + 134

- Error: Unable to parse version %u as a uint32_t + -maxmempool must be at least %d MB - 169 + 135

- Error: Unable to write record to new wallet + A fatal internal error occurred, see debug.log for details - 170 + 136 - - Failed to listen on any port. Use -listen=0 if you want this. - Failed to listen on any port. Use -listen=0 if you want this. - 171 + + Cannot resolve -%s address: '%s' + + 137

- Failed to rescan the wallet during initialization + Cannot set -peerblockfilters without -blockfilterindex. - 172 + 138

- Failed to verify database + Cannot write to data directory '%s'; check permissions. - 173 + 139

- Ignoring duplicate -wallet %s. + Change index out of range - 175 + 140

- Importing... + Config setting for %s only applied on %s network when in [%s] section. - 176 + 141 - - Incorrect or no genesis block found. Wrong datadir for network? - Incorrect or no genesis block found. Wrong datadir for network? - 177 + + Copyright (C) %i-%i + + 142

- Initialization sanity check failed. %s is shutting down. + Corrupted block database detected - 178 + 143

- Invalid -i2psam address or hostname: '%s' + Could not find asmap file %s - 180 + 144

- Invalid P2P permission: '%s' + Could not parse asmap file %s - 183 + 145

- Invalid amount for -%s=<amount>: '%s' + Disk space is too low! - 184 + 146

- Invalid amount for -discardfee=<amount>: '%s' + Do you want to rebuild the block database now? - 185 + 147

- Invalid amount for -fallbackfee=<amount>: '%s' + Done loading - 186 + 148

- SQLiteDatabase: Failed to execute statement to verify database: %s + Dump file %s does not exist. - 203 + 149

- SQLiteDatabase: Failed to fetch sqlite wallet schema version: %s + Error creating %s - 204 + 150

- SQLiteDatabase: Failed to fetch the application id: %s + Error initializing block database - 205 + 151

- SQLiteDatabase: Failed to prepare statement to verify database: %s + Error initializing wallet database environment %s! - 206 + 152

- SQLiteDatabase: Failed to read database verification error: %s + Error loading %s - 207 + 153

- SQLiteDatabase: Unexpected application id. Expected %u, got %u + Error loading %s: Private keys can only be disabled during creation - 208 + 154

- Specified blocks directory "%s" does not exist. + Error loading %s: Wallet corrupted - 214 + 155

- The specified config file %s does not exist + Error loading %s: Wallet requires newer version of %s - 217 + 156

- Unable to open %s for writing + Error loading block database - 234 + 157

- Unknown address type '%s' + Error opening block database - 237 + 158

- Unknown change type '%s' + Error reading from database, shutting down. - 238 + 159

- Upgrading txindex database + Error reading next record from wallet database - 242 + 160

- Loading P2P addresses... + Error upgrading chainstate database - 189 + 161

- Cannot downgrade wallet from version %i to version %i. Wallet version unchanged. + Error: Couldn't create cursor into database - 19 + 162

- Cannot upgrade a non HD split wallet from version %i to version %i without upgrading to support pre-split keypool. Please use version %i or no version specified. + Error: Disk space is low for %s - 27 + 163

- Error: Dumpfile format record is incorrect. Got "%s", expected "format". + Error: Dumpfile checksum does not match. Computed %s, expected %s - 37 + 164

- Error: Dumpfile identifier record is incorrect. Got "%s", expected "%s". + Error: Got key that was not hex: %s - 39 + 165

- Error: Dumpfile version is not supported. This version of bitcoin-wallet only supports version 1 dumpfiles. Got dumpfile with version %s + Error: Got value that was not hex: %s - 41 + 166

- File %s already exists. If you are sure this is what you want, move it out of the way first. + Error: Keypool ran out, please call keypoolrefill first - 49 + 167

- No dump file provided. To use createfromdump, -dumpfile=<filename> must be provided. + Error: Missing checksum - 58 + 168

- No dump file provided. To use dump, -dumpfile=<filename> must be provided. + Error: Unable to parse version %u as a uint32_t - 61 + 169

- No wallet file format provided. To use createfromdump, -format=<format> must be provided. + Error: Unable to write record to new wallet - 63 + 170

- Unknown wallet file format "%s" provided. Please provide one of "bdb" or "sqlite". + Failed to listen on any port. Use -listen=0 if you want this. - 120 + 171

- Warning: Dumpfile wallet format "%s" does not match command line specified format "%s". + Failed to rescan the wallet during initialization - 123 + 172

- Loading banlist... + Failed to verify database - 190 + 173 - - Not enough file descriptors available. - Not enough file descriptors available. - 195 + + Fee rate (%s) is lower than the minimum fee rate setting (%s) + + 174

- Prune cannot be configured with a negative value. + Ignoring duplicate -wallet %s. - 196 + 175

- Prune mode is incompatible with -txindex. + Importing… - 197 + 176

- Replaying blocks... + Incorrect or no genesis block found. Wrong datadir for network? - 200 + 177

- Rewinding blocks... + Initialization sanity check failed. %s is shutting down. - 202 + 178

- The source code is available from %s. + Insufficient funds - 216 + 179

- Transaction fee and change calculation failed + Invalid -i2psam address or hostname: '%s' - 225 + 180

- Unable to bind to %s on this computer. %s is probably already running. + Invalid -onion address or hostname: '%s' - 230 + 181

- Unable to generate keys + Invalid -proxy address or hostname: '%s' - 233 + 182

- Unsupported logging category %s=%s. + Invalid P2P permission: '%s' - 240 + 183

- Upgrading UTXO database + Invalid amount for -%s=<amount>: '%s' - 241 + 184

- User Agent comment (%s) contains unsafe characters. + Invalid amount for -discardfee=<amount>: '%s' - 243 + 185 - - Verifying blocks... - Verifying blocks... - 244 + + Invalid amount for -fallbackfee=<amount>: '%s' + + 186

- Wallet needed to be rewritten: restart %s to complete + Invalid amount for -paytxfee=<amount>: '%s' (must be at least %s) - 246 + 187

- Error: Listening for incoming connections failed (listen returned error %s) + Invalid netmask specified in -whitelist: '%s' - 44 + 188

- %s corrupt. Try using the wallet tool bitcoin-wallet to salvage or restoring a backup. + Loading P2P addresses… - 13 + 189

- Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions) + Loading banlist… - 52 + 190

- The transaction amount is too small to send after the fee has been deducted + Loading block index… - 91 + 191

- This error could occur if this wallet was not shutdown cleanly and was last loaded using a build with a newer version of Berkeley DB. If so, please use the software that last loaded this wallet + Loading wallet… - 93 + 192

- This is the maximum transaction fee you pay (in addition to the normal fee) to prioritize partial spend avoidance over regular coin selection. + Need to specify a port with -whitebind: '%s' - 100 + 193

- Transaction needs a change address, but we can't generate it. Please call keypoolrefill first. + No proxy server specified. Use -proxy=<ip> or -proxy=<ip:port>. - 111 + 194

- You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain + Not enough file descriptors available. - 131 + 195

- A fatal internal error occurred, see debug.log for details + Prune cannot be configured with a negative value. - 136 + 196

- Cannot set -peerblockfilters without -blockfilterindex. + Prune mode is incompatible with -coinstatsindex. - 138 + 197

- Disk space is too low! + Prune mode is incompatible with -txindex. - 146 + 198

- Error reading from database, shutting down. + Pruning blockstore… - 159 + 199

- Error upgrading chainstate database + Reducing -maxconnections from %d to %d, because of system limitations. - 161 + 200

- Error: Disk space is low for %s + Replaying blocks… - 163 + 201

- Error: Keypool ran out, please call keypoolrefill first + Rescanning… - 167 + 202

- Fee rate (%s) is lower than the minimum fee rate setting (%s) + SQLiteDatabase: Failed to execute statement to verify database: %s - 174 + 203

- Invalid -onion address or hostname: '%s' + SQLiteDatabase: Failed to fetch sqlite wallet schema version: %s - 181 + 204

- Invalid -proxy address or hostname: '%s' + SQLiteDatabase: Failed to fetch the application id: %s - 182 + 205

- Invalid amount for -paytxfee=<amount>: '%s' (must be at least %s) + SQLiteDatabase: Failed to prepare statement to verify database: %s - 187 + 206

- Invalid netmask specified in -whitelist: '%s' + SQLiteDatabase: Failed to read database verification error: %s - 188 + 207

- Need to specify a port with -whitebind: '%s' + SQLiteDatabase: Unexpected application id. Expected %u, got %u - 193 + 208

- No proxy server specified. Use -proxy=<ip> or -proxy=<ip:port>. - - 194 - - - Reducing -maxconnections from %d to %d, because of system limitations. - - 199 - - Section [%s] is not recognized.

209

- + Signing transaction failed - Signing transaction failed +

210

- + Specified -walletdir "%s" does not exist

211

- + Specified -walletdir "%s" is a relative path

212

- + Specified -walletdir "%s" is not a directory

213

+ + Specified blocks directory "%s" does not exist. + + 214 + + + Starting network threads… + + 215 +

- The transaction amount is too small to pay the fee + The source code is available from %s. - 218 + 216

- This is experimental software. + The specified config file %s does not exist - 220 + 217 - - Transaction amount too small - Transaction amount too small - 223 + + The transaction amount is too small to pay the fee + + 218 - - Transaction too large - Transaction too large - 228 + + The wallet will avoid paying less than the minimum relay fee. + + 219

- Unable to bind to %s on this computer (bind returned error %s) + This is experimental software. - 229 + 220

- Unable to create the PID file '%s': %s + This is the minimum transaction fee you pay on every transaction. - 231 + 221

- Unable to generate initial keys + This is the transaction fee you will pay if you send a transaction. - 232 + 222

- Unknown -blockfilterindex value %s. + Transaction amount too small - 236 + 223

- Verifying wallet(s)... + Transaction amounts must not be negative - 245 + 224

- Warning: unknown new rules activated (versionbit %i) + Transaction fee and change calculation failed - 247 + 225

- -maxtxfee is set very high! Fees this large could be paid on a single transaction. + Transaction has too long of a mempool chain - 16 + 226

- This is the transaction fee you may pay when fee estimates are not available. + Transaction must have at least one recipient - 106 + 227

- Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments. + Transaction too large - 108 + 228

- %s is set very high! + Unable to bind to %s on this computer (bind returned error %s) - 134 + 229

- Starting network threads... + Unable to bind to %s on this computer. %s is probably already running. - 215 + 230

- The wallet will avoid paying less than the minimum relay fee. + Unable to create the PID file '%s': %s - 219 + 231

- This is the minimum transaction fee you pay on every transaction. + Unable to generate initial keys - 221 + 232

- This is the transaction fee you will pay if you send a transaction. + Unable to generate keys - 222 + 233

- Transaction amounts must not be negative + Unable to open %s for writing - 224 + 234

- Transaction has too long of a mempool chain + Unable to start HTTP server. See debug log for details. - 226 + 235

- Transaction must have at least one recipient + Unknown -blockfilterindex value %s. - 227 + 236 - - Unknown network specified in -onlynet: '%s' - Unknown network specified in -onlynet: '%s' - 239 + + Unknown address type '%s' + + 237 - - Insufficient funds - Insufficient funds - 179 + + Unknown change type '%s' + + 238

- Fee estimation failed. Fallbackfee is disabled. Wait a few blocks or enable -fallbackfee. + Unknown network specified in -onlynet: '%s' - 46 + 239

- Warning: Private keys detected in wallet {%s} with disabled private keys + Unsupported logging category %s=%s. - 126 + 240

- Cannot write to data directory '%s'; check permissions. + Upgrading UTXO database - 139 + 241 - - Loading block index... - Loading block index... - 191 + + Upgrading txindex database + + 242 - - Loading wallet... - Loading wallet... - 192 + + User Agent comment (%s) contains unsafe characters. + + 243 - - Rescanning... - Rescanning... - 201 + + Verifying blocks… + + 244 - - Done loading - Done loading - 148 + + Verifying wallet(s)… + + 245 + + + Wallet needed to be rewritten: restart %s to complete + + 246 + + + Warning: unknown new rules activated (versionbit %i) + + 247 -- cgit v1.2.3