From 788590736dff5018e64c65e88a206d3b65736672 Mon Sep 17 00:00:00 2001 From: "Wladimir J. van der Laan" Date: Fri, 21 Mar 2014 12:13:10 +0100 Subject: qt: translation update --- src/qt/locale/bitcoin_zh_CN.ts | 515 +++++++++++++++++++++++------------------ 1 file changed, 291 insertions(+), 224 deletions(-) (limited to 'src/qt/locale/bitcoin_zh_CN.ts') diff --git a/src/qt/locale/bitcoin_zh_CN.ts b/src/qt/locale/bitcoin_zh_CN.ts index 4315045584..e45b9242a1 100644 --- a/src/qt/locale/bitcoin_zh_CN.ts +++ b/src/qt/locale/bitcoin_zh_CN.ts @@ -36,6 +36,12 @@ This product includes software developed by the OpenSSL Project for use in the O The Bitcoin Core developers Bitcoin Core 的开发者 + + + + (%1-bit) + (%1 -比特) + AddressBookPage @@ -157,7 +163,7 @@ This product includes software developed by the OpenSSL Project for use in the O There was an error trying to save the address list to %1. - + 地址列表保存至 %1 时发生错误。 @@ -405,17 +411,17 @@ This product includes software developed by the OpenSSL Project for use in the O &Sending addresses... - + &付款地址 &Receiving addresses... - + &收款地址 Open &URI... - + 打开 &URI... @@ -568,12 +574,12 @@ This product includes software developed by the OpenSSL Project for use in the O &Command-line options - + &命令行 选项 Show the Bitcoin Core help message to get a list with possible Bitcoin command-line options - + 显示比特币核心 程序帮助信息，获取可用的命令行选项 @@ -616,6 +622,16 @@ This product includes software developed by the OpenSSL Project for use in the O %n week(s) %n 周前 + + + %1 and %2 + %1 和 %2 + + + + %n year(s) + %n 年 + %1 behind @@ -659,7 +675,7 @@ This product includes software developed by the OpenSSL Project for use in the O Sent transaction - 发出交易 + 发送交易 @@ -690,7 +706,7 @@ Address: %4 钱包已被<b>加密</b>，当前为<b>锁定</b>状态 - + A fatal error occurred. Bitcoin can no longer continue safely and will quit. 发生严重错误。 @@ -708,7 +724,7 @@ Address: %4 Coin Control Address Selection - + 选择交易源地址 @@ -738,12 +754,12 @@ Address: %4 Low Output: - + 低输出 After Fee: - + 加上交易费用后: @@ -751,7 +767,7 @@ Address: %4 变更 : - + (un)select all (不)全选 @@ -766,7 +782,7 @@ Address: %4 列表模式 - + Amount 金额 @@ -819,27 +835,27 @@ Address: %4 Lock unspent - + 锁定未花费 Unlock unspent - + 解锁未花费 Copy quantity - + 复制金额 Copy fee - + 复制交易费 Copy after fee - + 复制含交易费的金额 @@ -854,12 +870,12 @@ Address: %4 Copy low output - + 复制低输出 Copy change - + 复制零钱 @@ -909,7 +925,7 @@ Address: %4 (%1 locked) - + (%1 锁定) @@ -917,9 +933,9 @@ Address: %4 无 - + Dust - + 尘埃交易 @@ -934,49 +950,49 @@ Address: %4 This label turns red, if the transaction size is greater than 1000 bytes. - + 如果这笔交易大于1000字节，标签会变成红色。 This means a fee of at least %1 per kB is required. - + 这意味着将对交易收取 %1/千字节 的交易费。 Can vary +/- 1 byte per input. - + 每笔输入可能会有 正负1字节的偏差。 Transactions with higher priority are more likely to get included into a block. - + 交易的优先级越高，被矿工收入数据块的速度也越快。 This label turns red, if the priority is smaller than "medium". - + 如果优先级小于"中位数" ，标签将变成红色。 This label turns red, if any recipient receives an amount smaller than %1. - + 如果收款地址收到小于%1的比特币，标签将变成红色。 This means a fee of at least %1 is required. - + 这意味着至少需要 %1的交易费。 Amounts below 0.546 times the minimum relay fee are shown as dust. - + 小于最小转发交易费的0.546倍的 转账金额将被视为 尘埃交易。 This label turns red, if the change is smaller than %1. - + 如果零钱小于 %1，标签将变成红色。 @@ -987,12 +1003,12 @@ Address: %4 change from %1 (%2) - + 来自%1的零钱 (%2) (change) - + (零钱) @@ -1096,10 +1112,10 @@ Address: %4 Bitcoin Core - Command-line options - + 比特币核心程序 - 命令行选项 - + Bitcoin Core 比特币核心 @@ -1155,17 +1171,17 @@ Address: %4 Welcome to Bitcoin Core. - + 欢迎使用 比特币核心 程序。 As this is the first time the program is launched, you can choose where Bitcoin Core will store its data. - + 由于这是第一次运行 比特币核心 程序，您可以选择数据存储目录。 Bitcoin Core will download and store a copy of the Bitcoin block chain. At least %1GB of data will be stored in this directory, and it will grow over time. The wallet will also be stored in this directory. - + 比特币核心 程序会下载储存一份数据块链(blockchain)。至少需要 %1 GB的存储空间，随着时间推移会需要更多的存储空间。钱包文件也储存在该目录。 @@ -1208,27 +1224,27 @@ Address: %4 Open URI - + 打开 URI Open payment request from URI or file - + 打开来自URI或文件的付款请求 URI: - + URI: Select payment request file - + 选择付款请求文件 Select payment request file to open - + 选择需要打开的付款请求文件 @@ -1244,7 +1260,7 @@ Address: %4 主要(&M) - + Optional transaction fee per kB that helps make sure your transactions are processed quickly. Most transactions are 1 kB. 可选的每 kB 交易费，这有助于您的交易被更快的处理。大多数交易都是 1 kB。 @@ -1254,7 +1270,7 @@ Address: %4 支付交易费用(&F) - + Automatically start Bitcoin after logging in to the system. 登录系统后自动开启比特币客户端 @@ -1269,19 +1285,14 @@ Address: %4 数据库缓存大小(&D) - - Set database cache size in megabytes (default: 25) - 设置数据库缓冲区大小 (缺省: 25MB) - - - + MB MB Number of script &verification threads - + 脚本&验证 进程数 @@ -1289,7 +1300,12 @@ Address: %4 设置脚本验证线程数量（最多16，0 = 自动，<0 = 留下许多空闲核心，默认为 0） - + + &Spend unconfirmed change (experts only) + &使用未确认的零钱 (仅限专家使用) + + + Connect to the Bitcoin network through a SOCKS proxy. 通过 SOCKS 代理连接到比特币网络。 @@ -1306,7 +1322,7 @@ Address: %4 Active command-line options that override above options: - + 有效的命令行参数覆盖上述选项: @@ -1324,7 +1340,17 @@ Address: %4 网络(&N) - + + W&allet + &钱包 + + + + If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed. + 如果禁用未确认的零钱，则零钱至少需要1个确认才能使用。同时账户余额显示会受到影响。 + + + Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled. 自动在路由器中打开比特币端口。只有当您的路由器开启了 UPnP 选项时此功能才有效。 @@ -1421,12 +1447,12 @@ Address: %4 Whether to show coin control features or not. - + 是否需要交易源地址控制功能。 Display coin &control features (experts only) - + 使用交易源地址控制功能 (仅限专家使用) @@ -1439,17 +1465,17 @@ Address: %4 取消(&C) - + default 默认 - + none 无 - + Confirm options reset 确认恢复缺省设置 @@ -1489,19 +1515,14 @@ Address: %4 现在显示的消息可能是过期的. 在连接上比特币网络节点后，您的钱包将自动与网络同步，但是这个过程还没有完成。 - - Unconfirmed: - 未确认： - - - + Wallet 钱包 - Confirmed: - 已确认： + Available: + 可使用的余额： @@ -1509,7 +1530,12 @@ Address: %4 您当前可使用的余额 - + + Pending: + 等待中的余额： + + + Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance 尚未确认的交易总额，未计入当前余额 @@ -1591,22 +1617,22 @@ Address: %4 Payment request fetch URL is invalid: %1 - + 付款请求URI链接非法: %1 Payment request file handling - + 付款请求文件处理 Payment request file can not be read or processed! This can be caused by an invalid payment request file. - + 付款请求文件不能读取或无法识别！这可能是个不合格的付款请求文件。 Unverified payment requests to custom payment scripts are unsupported. - + 不支持到自定义付款脚本的未验证付款请求。 @@ -1657,6 +1683,11 @@ Address: %4 Error: Invalid combination of -regtest and -testnet. 错误：无效的 -regtest 与 -testnet 结合体。 + + + Enter a Bitcoin address (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) + 请输入比特币地址（例如: 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L） + QRImageWidget @@ -1678,7 +1709,7 @@ Address: %4 PNG Image (*.png) - + PNG图片(*.png) @@ -1716,7 +1747,7 @@ Address: %4 Debug window - + 调试窗口 @@ -1877,22 +1908,22 @@ Address: %4 ReceiveCoinsDialog - + &Amount: 总额(&A)： - + &Label: 标签(&L)： - + &Message: 消息(&M)： - + Reuse one of the previously used receiving addresses. Reusing addresses has security and privacy issues. Do not use this unless re-generating a payment request made before. 重复使用以前用过的接收地址。重用地址有安全和隐私方面的隐患。除非是为重复生成同一项支付请求，否则请不要这样做。 @@ -1902,27 +1933,30 @@ Address: %4 重用现有的接收地址（不推荐） - - An optional label to associate with the new receiving address - 与新接收地址相关的标签，可选 + + + An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network. + 可在付款请求上备注一条信息，在打开付款请求时可以看到。注意：该消息不是通过比特币网络传送。 - - An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network. - + + + An optional label to associate with the new receiving address. + 可为新建的收款地址添加一个标签。 - + Use this form to request payments. All fields are <b>optional</b>. 使用此表单要求付款。所有字段都是<b>可选</b>。 - + + An optional amount to request. Leave this empty or zero to not request a specific amount. 可选的请求金额。留空或填零为不要求具体金额。 - + Clear all fields of the form. 清空此表单的所有字段。 @@ -1932,35 +1966,50 @@ Address: %4 清除 - - &Request payment - 请求付款(&R) + + Requested payments history + 请求付款的历史 - - Requested payments - 已请求支付 + + &Request payment + 请求付款(&R) - + Show the selected request (does the same as double clicking an entry) - + 显示选中的请求 (双击也可以显示) Show - + 显示 Remove the selected entries from the list - + 从列表中移除选中的条目 Remove 移除 + + + Copy label + 复制标签 + + + + Copy message + 复制消息 + + + + Copy amount + 复制金额 + ReceiveRequestDialog @@ -2062,12 +2111,17 @@ Address: %4 (no message) (无消息) + + + (no amount) + (无金额) + SendCoinsDialog - + Send Coins 发送货币 @@ -2075,7 +2129,7 @@ Address: %4 Coin Control Features - + 交易源地址控制功能 @@ -2120,12 +2174,12 @@ Address: %4 Low Output: - + 低输出 After Fee: - + 加上交易费用后: @@ -2135,15 +2189,15 @@ Address: %4 If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address. - + 如果激活该选项，但是零钱地址用光或者非法，将会新生成零钱地址，转入零钱。 Custom change address - + 自定义零钱地址 - + Send to multiple recipients at once 一次发送给多个接收者 @@ -2153,7 +2207,7 @@ Address: %4 添加收款人(&R) - + Clear all fields of the form. 清除此表单的所有字段。 @@ -2163,12 +2217,12 @@ Address: %4 清除所有(&A) - + Balance: 余额： - + Confirm the send action 确认并发送货币 @@ -2178,7 +2232,7 @@ Address: %4 发送(&E) - + Confirm send coins 确认发送货币 @@ -2191,14 +2245,9 @@ Address: %4 %1 到 %2 - - Enter a Bitcoin address (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - 请输入比特币地址（例如: 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L） - - - + Copy quantity - + 复制金额 @@ -2208,12 +2257,12 @@ Address: %4 Copy fee - + 复制交易费 Copy after fee - + 复制含交易费的金额 @@ -2228,12 +2277,12 @@ Address: %4 Copy low output - + 复制低输出 Copy change - + 复制零钱 @@ -2246,7 +2295,7 @@ Address: %4 或 - + The recipient address is not valid, please recheck. 收款人地址不合法，请检查。 @@ -2278,15 +2327,15 @@ Address: %4 The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. - + 错误：该交易被拒绝！发生这种错误的原因可能是：钱包中的比特币已经被用掉，有可能您复制了wallet.dat钱包文件，然后用复制的钱包文件支付了比特币，但是这个钱包文件中没有记录。 - + Warning: Invalid Bitcoin address 警告：无效的比特币地址 - + (no label) (没有标签) @@ -2296,7 +2345,7 @@ Address: %4 警告：未知的更改地址 - + Are you sure you want to send? 您确定要发出吗？ @@ -2306,7 +2355,7 @@ Address: %4 已添加交易费 - + Payment request expired 支付请求已过期 @@ -2383,12 +2432,7 @@ Address: %4 消息： - - A message that was attached to the Bitcoin URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network. - - - - + This is a verified payment request. 这是个有效的支付请求。 @@ -2398,7 +2442,12 @@ Address: %4 请为此地址输入一个标签以将它加入用过的地址列表 - + + A message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network. + bitcoin:URI 附带的备注信息，将会和交易一起存储，备查。 注意：该消息不会通过比特币网络传输。 + + + This is an unverified payment request. 这是个非有效的支付请求。 @@ -2414,11 +2463,6 @@ Address: %4 Memo: 便条： - - - Enter a Bitcoin address (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - 请输入比特币地址（例如: 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L） - ShutdownWindow @@ -2456,19 +2500,19 @@ Address: %4 用于签名消息的地址（例如: 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L） - - + + Choose previously used address 选择以前用过的地址 - - + + Alt+A Alt+A - + Paste address from clipboard 从剪贴板粘贴地址 @@ -2509,12 +2553,12 @@ Address: %4 - + Clear &All 清除所有(&A) - + &Verify Message 验证消息(&V) @@ -2529,7 +2573,7 @@ Address: %4 用于签名消息的地址(例如: 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - + Verify the message to ensure it was signed with the specified Bitcoin address 验证消息，确保消息是由指定的比特币地址签名过的。 @@ -2544,43 +2588,37 @@ Address: %4 清空所有验证消息栏 - - + Enter a Bitcoin address (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) 请输入比特币地址 (例如: 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - + Click "Sign Message" to generate signature 单击“签名消息“产生签名。 - - - Enter Bitcoin signature - 输入比特币签名 - - + The entered address is invalid. 输入的地址非法。 - + - + Please check the address and try again. 请检查地址后重试。 - - + + The entered address does not refer to a key. 输入的地址没有关联的公私钥对。 - + Wallet unlock was cancelled. 钱包解锁动作取消。 @@ -2600,7 +2638,7 @@ Address: %4 消息已签名。 - + The signature could not be decoded. 签名无法解码。 @@ -2661,6 +2699,11 @@ Address: %4 + conflicted + 发现冲突 + + + %1/offline %1 / 离线 @@ -2822,12 +2865,12 @@ Address: %4 ，未被成功广播 - + Open for %n more block(s) Open for %n more block - + unknown 未知 @@ -2868,12 +2911,12 @@ Address: %4 数量 - + Immature (%1 confirmations, will be available after %2) 未成熟 (%1 个确认，将在 %2 个后可用) - + Open for %n more block(s) Open for %n more block @@ -2883,23 +2926,12 @@ Address: %4 至 %1 个数据块时开启 - - Offline (%1 confirmations) - 离线 (%1 个确认项) - - - - Unconfirmed (%1 of %2 confirmations) - 未确认 (%1 / %2 条确认信息) - - - - + Confirmed (%1 confirmations) 已确认 (%1 条确认信息) - + This block was not received by any other nodes and will probably not be accepted! 此数据块未被任何其他节点接收，可能不被接受！ @@ -2909,7 +2941,27 @@ Address: %4 已生成但未被接受 - + + Offline + 掉线 + + + + Unconfirmed + 未确认的 + + + + Confirming (%1 of %2 recommended confirmations) + 确认中 (推荐 %2个确认，已经有 %1个确认) + + + + Conflicted + 冲突的 + + + Received with 接收于 @@ -2939,7 +2991,7 @@ Address: %4 （不可用） - + Transaction status. Hover over this field to show number of confirmations. 交易状态。 鼠标移到此区域可显示确认项数量。 @@ -3189,12 +3241,12 @@ Address: %4 There was an error trying to save the wallet data to %1. - + 尝试保存钱包数据至 %1 时发生错误。 The wallet data was successfully saved to %1. - + 钱包数据成功保存至 %1 。 @@ -3205,12 +3257,12 @@ Address: %4 bitcoin-core - + Usage: 使用： - + List commands 列出命令 @@ -3271,12 +3323,12 @@ Address: %4 指定您的公共地址 - + Threshold for disconnecting misbehaving peers (default: 100) 断开行为不端对端阀值（缺省: 100） - + Number of seconds to keep misbehaving peers from reconnecting (default: 86400) Number of seconds to keep misbehaving peers from reconnecting (缺省: 86400) @@ -3297,20 +3349,20 @@ Address: %4 - + Run in the background as a daemon and accept commands 在后台运行并接受命令 - + Use the test network 使用测试网络 - + Accept connections from outside (default: 1 if no -proxy or -connect) 接受来自外部的连接 (缺省: 如果不带 -proxy or -connect 参数设置为1) @@ -3392,7 +3444,7 @@ rpcpassword=%s Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: -proxy) - + 连接至 Tor隐藏服务器时 使用不同的SOCKS5代理 (缺省: -proxy) @@ -3427,7 +3479,7 @@ rpcpassword=%s <category> can be: - + <category> 可能是： @@ -3437,7 +3489,7 @@ rpcpassword=%s Bitcoin Core Daemon - + 比特币核心 守护程序 @@ -3451,13 +3503,18 @@ rpcpassword=%s + Clear list of wallet transactions (diagnostic tool; implies -rescan) + 清除钱包中的交易记录 (诊断用，意味着需要重新扫描 -rescan) + + + Connect only to the specified node(s) 仅连接到指定节点 Connect through SOCKS proxy - + 通过Socks代理连接: @@ -3602,7 +3659,7 @@ rpcpassword=%s If <category> is not supplied, output all debugging information. - + 如果<category>未提供，将输出所有调试信息。 @@ -3622,7 +3679,7 @@ rpcpassword=%s Prepend debug output with timestamp (default: 1) - + 调试信息输出时，前面加上时间戳 (缺省: 1) @@ -3661,6 +3718,11 @@ rpcpassword=%s + Spend unconfirmed change when sending transactions (default: 1) + 付款时允许使用未确认的零钱 (缺省: 1) + + + Start Bitcoin server 启动比特币服务器 @@ -3710,12 +3772,12 @@ rpcpassword=%s 您需要将 -reindex 改为 -txindex 以重建数据库 - + Imports blocks from external blk000??.dat file 从blk000??.dat文件导入数据块 - + Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message) 当收到相关提醒或者我们看到一个长分叉时执行命令（%s 将替换为消息） @@ -3727,7 +3789,7 @@ rpcpassword=%s Set maximum size of high-priority/low-fee transactions in bytes (default: %d) - + 设置 高优先级/低交易费 交易的最大字节 (缺省: %d) @@ -3735,7 +3797,7 @@ rpcpassword=%s 设置脚本验证线程数量（最多16，0 = 自动，<0 = 留下许多空闲核心，默认为 0） - + Information 信息 @@ -3805,7 +3867,7 @@ rpcpassword=%s 设置连接超时时间(缺省：5000毫秒) - + System error: 系统错误： @@ -3851,6 +3913,11 @@ rpcpassword=%s + Zapping all transactions from wallet... + Zapping all transactions from wallet... + + + version 版本 @@ -3860,33 +3927,33 @@ rpcpassword=%s 钱包文件wallet.dat损坏，抢救备份失败 - + Password for JSON-RPC connections JSON-RPC 连接密码 - + Allow JSON-RPC connections from specified IP address 允许从指定IP接受到的 JSON-RPC 连接 - + Send commands to node running on <ip> (default: 127.0.0.1) 向IP地址为 <ip> 的节点发送指令 (缺省: 127.0.0.1) - + Execute command when the best block changes (%s in cmd is replaced by block hash) 当最佳数据块变化时执行命令 (命令行中的 %s 会被替换成数据块哈希值) - + Upgrade wallet to latest format 将钱包升级到最新的格式 - + Set key pool size to <n> (default: 100) 设置密钥池大小为 <n> (缺省: 100) @@ -3897,12 +3964,12 @@ rpcpassword=%s 重新扫描区块链以查找遗漏的钱包交易 - + Use OpenSSL (https) for JSON-RPC connections 为 JSON-RPC 连接使用 OpenSSL (https) 连接 - + Server certificate file (default: server.cert) 服务器证书 (默认为 server.cert) @@ -3914,7 +3981,7 @@ rpcpassword=%s - + This help message 本帮助信息 @@ -3925,12 +3992,12 @@ rpcpassword=%s 无法绑定本机端口 %s (返回错误消息 %d, %s) - + Allow DNS lookups for -addnode, -seednode and -connect 使用 -addnode, -seednode 和 -connect 选项时允许查询DNS - + Loading addresses... 正在加载地址簿... @@ -3945,12 +4012,12 @@ rpcpassword=%s wallet.dat 钱包文件加载错误：请升级到最新版Bitcoin客户端 - + Wallet needed to be rewritten: restart Bitcoin to complete 钱包文件需要被重写：请退出并重新启动Bitcoin客户端 - + Error loading wallet.dat wallet.dat 钱包文件加载出错 @@ -3960,7 +4027,7 @@ rpcpassword=%s 无效的代理地址：%s - + Unknown network specified in -onlynet: '%s' -onlynet 指定的是未知网络：%s @@ -3970,7 +4037,7 @@ rpcpassword=%s 被指定的是未知socks代理版本: %i - + Cannot resolve -bind address: '%s' 无法解析 -bind 端口地址: '%s' @@ -3980,7 +4047,7 @@ rpcpassword=%s 无法解析 -externalip 地址: '%s' - + Invalid amount for -paytxfee=<amount>: '%s' 非法金额 -paytxfee=<amount>: '%s' @@ -4000,7 +4067,7 @@ rpcpassword=%s 正在加载数据块索引... - + Add a node to connect to and attempt to keep the connection open 添加节点并与其保持连接 @@ -4010,12 +4077,12 @@ rpcpassword=%s 无法在本机绑定 %s 端口。比特币客户端软件可能已经在运行。 - + Loading wallet... 正在加载钱包... - + Cannot downgrade wallet 无法降级钱包 @@ -4025,7 +4092,7 @@ rpcpassword=%s 无法写入默认地址 - + Rescanning... 正在重新扫描... @@ -4035,17 +4102,17 @@ rpcpassword=%s 加载完成 - + To use the %s option 使用 %s 选项 - + Error 错误 - + You must set rpcpassword=<password> in the configuration file: %s If the file does not exist, create it with owner-readable-only file permissions. -- cgit v1.2.3