From ea55881c3e70cc023ebcdc716dbb8aa960d68fe6 Mon Sep 17 00:00:00 2001 From: "Wladimir J. van der Laan" Date: Mon, 1 Sep 2014 11:00:16 +0200 Subject: Filter translations through new update-translations script This does not add any new messages from transifex, it just filters the current ones. --- src/qt/locale/bitcoin_uk.ts | 1086 ++----------------------------------------- 1 file changed, 42 insertions(+), 1044 deletions(-) (limited to 'src/qt/locale/bitcoin_uk.ts') diff --git a/src/qt/locale/bitcoin_uk.ts b/src/qt/locale/bitcoin_uk.ts index 3b8aafd026..60197495ef 100644 --- a/src/qt/locale/bitcoin_uk.ts +++ b/src/qt/locale/bitcoin_uk.ts @@ -1,14 +1,6 @@ - + AboutDialog - - About Bitcoin Core - - - - <b>Bitcoin Core</b> version - - This is experimental software. @@ -27,15 +19,7 @@ This product includes software developed by the OpenSSL Project for use in the O Copyright Авторське право - - The Bitcoin Core developers - - - - (%1-bit) - - - + AddressBookPage @@ -46,22 +30,10 @@ This product includes software developed by the OpenSSL Project for use in the O Create a new address Створити нову адресу - - &New - - Copy the currently selected address to the system clipboard Копіювати виділену адресу в буфер обміну - - &Copy - - - - C&lose - - &Copy Address &Скопіювати адресу @@ -82,26 +54,10 @@ This product includes software developed by the OpenSSL Project for use in the O &Delete &Видалити - - Choose the address to send coins to - - - - Choose the address to receive coins with - - C&hoose &Обрати - - Sending addresses - - - - Receiving addresses - - These are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins. Це ваші Bitcoin адреси для відправки платежів. Перед відправкою монети Завжди перевіряйте суму та адресу прийому. @@ -126,15 +82,7 @@ This product includes software developed by the OpenSSL Project for use in the O Comma separated file (*.csv) Файли відділені комами (*.csv) - - Exporting Failed - - - - There was an error trying to save the address list to %1. - - - + AddressTableModel @@ -226,7 +174,7 @@ This product includes software developed by the OpenSSL Project for use in the O Bitcoin will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer. - Біткоін-клієнт буде закрито для завершення процесу шифрування. Пам'ятайте, що шифрування гаманця не може повністю захистити ваші біткоіни від крадіжки, у випадку якщо ваш комп'ютер буде інфіковано шкідливими програмами. + Біткоін-клієнт буде закрито для завершення процесу шифрування. Пам'ятайте, що шифрування гаманця не може повністю захистити ваші біткоіни від крадіжки, у випадку якщо ваш комп'ютер буде інфіковано шкідливими програмами. Wallet encryption failed @@ -271,10 +219,6 @@ This product includes software developed by the OpenSSL Project for use in the O &Overview &Огляд - - Node - - Show general overview of wallet Показати загальний огляд гаманця @@ -431,74 +375,30 @@ This product includes software developed by the OpenSSL Project for use in the O Bitcoin Core Bitcoin Ядро - - Request payments (generates QR codes and bitcoin: URIs) - - - - &About Bitcoin Core - - - - Show the list of used sending addresses and labels - - - - Show the list of used receiving addresses and labels - - - - Open a bitcoin: URI or payment request - - &Command-line options Параметри командного рядка - - Show the Bitcoin Core help message to get a list with possible Bitcoin command-line options - - Bitcoin client Bitcoin-клієнт %n active connection(s) to Bitcoin network - %n активне з'єднання з мережею%n активні з'єднання з мережею%n активних з'єднань з мережею + %n активне з'єднання з мережею%n активні з'єднання з мережею%n активних з'єднань з мережею No block source available... Ні блок джерела доступні ... - - Processed %1 of %2 (estimated) blocks of transaction history. - - Processed %1 blocks of transaction history. Оброблено %1 блоків історії транзакцій. - - %n hour(s) - %n годин - - - %n day(s) - %n днів - - - %n week(s) - %n тижнів - %1 and %2 %1 та %2 - - %n year(s) - %n років - %1 behind %1 позаду @@ -573,18 +473,10 @@ Address: %4 CoinControlDialog - - Coin Control Address Selection - - Quantity: Кількість: - - Bytes: - - Amount: Кількість: @@ -597,10 +489,6 @@ Address: %4 Fee: Комісія: - - Low Output: - - After Fee: Після комісії @@ -609,18 +497,6 @@ Address: %4 Change: Решта: - - (un)select all - - - - Tree mode - - - - List mode - - Amount Кількість @@ -633,18 +509,10 @@ Address: %4 Date Дата - - Confirmations - - Confirmed Підтверджені - - Priority - - Copy address Скопіювати адресу @@ -661,14 +529,6 @@ Address: %4 Copy transaction ID Копіювати ID транзакції - - Lock unspent - - - - Unlock unspent - - Copy quantity Копіювати кількість @@ -689,10 +549,6 @@ Address: %4 Copy priority Копіювати пріорітет - - Copy low output - - Copy change Копіювати решту @@ -733,18 +589,6 @@ Address: %4 lowest найнижчий - - (%1 locked) - - - - none - - - - Dust - - yes так @@ -758,50 +602,18 @@ Address: %4 Ця позначка буде червоною, якщо розмір транзакції вищий за 1000 байт. - This means a fee of at least %1 per kB is required. - - - - Can vary +/- 1 byte per input. - - - - Transactions with higher priority are more likely to get included into a block. - - - - This label turns red, if the priority is smaller than "medium". - Ця позначка буде червоною, якщо пріорітет транзакції нижчий за «середній»". + This label turns red, if the priority is smaller than "medium". + Ця позначка буде червоною, якщо пріорітет транзакції нижчий за «середній»". This label turns red, if any recipient receives an amount smaller than %1. Ця позначка буде червоною, якщо будь хто з отримувачів отримає менше ніж %1. - - This means a fee of at least %1 is required. - - - - Amounts below 0.546 times the minimum relay fee are shown as dust. - - - - This label turns red, if the change is smaller than %1. - - (no label) (немає назви) - - change from %1 (%2) - - - - (change) - - - + EditAddressDialog @@ -812,14 +624,6 @@ Address: %4 &Label &Мітка - - The label associated with this address list entry - - - - The address associated with this address list entry. This can only be modified for sending addresses. - - &Address &Адреса @@ -841,11 +645,11 @@ Address: %4 Редагувати адресу для відправлення - The entered address "%1" is already in the address book. + The entered address "%1" is already in the address book. Введена адреса «%1» вже присутня в адресній книзі. - The entered address "%1" is not a valid Bitcoin address. + The entered address "%1" is not a valid Bitcoin address. Введена адреса «%1» не є коректною адресою в мережі Bitcoin. @@ -882,10 +686,6 @@ Address: %4 HelpMessageDialog - - Bitcoin Core - Command-line options - - Bitcoin Core Bitcoin Ядро @@ -907,17 +707,13 @@ Address: %4 Параметри інтерфейсу - Set language, for example "de_DE" (default: system locale) - Встановлення мови, наприклад "de_DE" (типово: системна) + Set language, for example "de_DE" (default: system locale) + Встановлення мови, наприклад "de_DE" (типово: системна) Start minimized Запускати згорнутим - - Set SSL root certificates for payment request (default: -system-) - - Show splash screen on startup (default: 1) Показувати заставку під час запуску (типово: 1) @@ -957,10 +753,6 @@ Address: %4 Bitcoin Bitcoin - - Error: Specified data directory "%1" can not be created. - - Error Помилка @@ -980,23 +772,11 @@ Address: %4 Open URI Відкрити URI - - Open payment request from URI or file - - URI: URI: - - Select payment request file - - - - Select payment request file to open - - - + OptionsDialog @@ -1023,42 +803,6 @@ Address: %4 &Start Bitcoin on system login &Запускати гаманець при вході в систему - - Size of &database cache - - - - MB - - - - Number of script &verification threads - - - - Connect to the Bitcoin network through a SOCKS proxy. - - - - &Connect through SOCKS proxy (default proxy): - - - - IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1) - - - - Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |. - - - - Third party transaction URLs - - - - Active command-line options that override above options: - - Reset all client options to default. Скинути всі параметри клієнта на типові. @@ -1071,30 +815,6 @@ Address: %4 &Network &Мережа - - (0 = auto, <0 = leave that many cores free) - - - - W&allet - - - - Expert - - - - Enable coin &control features - - - - If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed. - - - - &Spend unconfirmed change - - Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled. Автоматично відкривати порт для клієнту біткоін на роутері. Працює лише якщо ваш роутер підтримує UPnP і ця функція увімкнена. @@ -1171,10 +891,6 @@ Address: %4 &Display addresses in transaction list &Відображати адресу в списку транзакцій - - Whether to show coin control features or not. - - &OK &Гаразд @@ -1187,26 +903,10 @@ Address: %4 default типово - - none - - Confirm options reset Підтвердження скидання параметрів - - Client restart required to activate changes. - - - - Client will be shutdown, do you want to proceed? - - - - This change would require a client restart. - - The supplied proxy address is invalid. Невірно вказано адресу проксі. @@ -1226,18 +926,10 @@ Address: %4 Wallet Гаманець - - Available: - - Your current spendable balance Ваш поточний баланс расходуемого - - Pending: - - Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance Всього угод, які ще мають бути підтверджені, і до цих пір не враховуються в расходуемого балансу @@ -1277,89 +969,13 @@ Address: %4 URI can not be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters. Неможливо обробити URI! Це може бути викликано неправильною Bitcoin-адресою, чи невірними параметрами URI. - - Requested payment amount of %1 is too small (considered dust). - - - - Payment request error - - - - Cannot start bitcoin: click-to-pay handler - - - - Net manager warning - - - - Your active proxy doesn't support SOCKS5, which is required for payment requests via proxy. - - - - Payment request fetch URL is invalid: %1 - - - - Payment request file handling - - - - Payment request file can not be read or processed! This can be caused by an invalid payment request file. - - - - Unverified payment requests to custom payment scripts are unsupported. - - - - Refund from %1 - - - - Error communicating with %1: %2 - - - - Payment request can not be parsed or processed! - - - - Bad response from server %1 - - - - Payment acknowledged - - - - Network request error - - - + QObject Bitcoin Bitcoin - - Error: Specified data directory "%1" does not exist. - - - - Error: Cannot parse configuration file: %1. Only use key=value syntax. - - - - Error: Invalid combination of -regtest and -testnet. - - - - Bitcoin Core didn't yet exit safely... - - Enter a Bitcoin address (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) Введіть адресу Bitcoin (наприклад 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) @@ -1379,11 +995,7 @@ Address: %4 Save QR Code Зберегти QR-код - - PNG Image (*.png) - - - + RPCConsole @@ -1406,10 +1018,6 @@ Address: %4 Debug window Вікно зневадження - - General - - Using OpenSSL version Використовується OpenSSL версії @@ -1454,26 +1062,10 @@ Address: %4 &Console Консоль - - &Network Traffic - - - - &Clear - - Totals всього: - - In: - - - - Out: - - Build date Дата збирання @@ -1502,22 +1094,6 @@ Address: %4 Type <b>help</b> for an overview of available commands. Наберіть <b>help</b> для перегляду доступних команд. - - %1 B - - - - %1 KB - - - - %1 MB - - - - %1 GB - - %1 m %1 х @@ -1526,11 +1102,7 @@ Address: %4 %1 h %1 г - - %1 h %2 m - - - + ReceiveCoinsDialog @@ -1545,30 +1117,6 @@ Address: %4 &Message: &Повідомлення: - - Reuse one of the previously used receiving addresses. Reusing addresses has security and privacy issues. Do not use this unless re-generating a payment request made before. - - - - R&euse an existing receiving address (not recommended) - - - - An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network. - - - - An optional label to associate with the new receiving address. - - - - Use this form to request payments. All fields are <b>optional</b>. - - - - An optional amount to request. Leave this empty or zero to not request a specific amount. - - Clear all fields of the form. Очистити всі поля в формі @@ -1577,30 +1125,6 @@ Address: %4 Clear Очистити - - Requested payments history - - - - &Request payment - - - - Show the selected request (does the same as double clicking an entry) - - - - Show - - - - Remove the selected entries from the list - - - - Remove - - Copy label Скопіювати мітку @@ -1632,14 +1156,6 @@ Address: %4 &Save Image... &Зберегти зображення... - - Request payment to %1 - - - - Payment information - - URI URI @@ -1691,45 +1207,17 @@ Address: %4 (no label) (немає назви) - - (no message) - - - - (no amount) - - - + SendCoinsDialog Send Coins Відправити - - Coin Control Features - - - - Inputs... - - - - automatically selected - - - - Insufficient funds! - - Quantity: Кількість: - - Bytes: - - Amount: Кількість: @@ -1742,10 +1230,6 @@ Address: %4 Fee: Комісія: - - Low Output: - - After Fee: Після комісії @@ -1754,14 +1238,6 @@ Address: %4 Change: Решта: - - If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address. - - - - Custom change address - - Send to multiple recipients at once Відправити на декілька адрес @@ -1794,10 +1270,6 @@ Address: %4 Confirm send coins Підтвердіть відправлення - - %1 to %2 - - Copy quantity Копіювати кількість @@ -1822,22 +1294,10 @@ Address: %4 Copy priority Копіювати пріорітет - - Copy low output - - Copy change Копіювати решту - - Total Amount %1 (= %2) - - - - or - - The recipient address is not valid, please recheck. Адреса отримувача невірна, будь ласка перепровірте. @@ -1858,43 +1318,15 @@ Address: %4 Duplicate address found, can only send to each address once per send operation. Знайдено адресу що дублюється. Відправлення на кожну адресу дозволяється лише один раз на кожну операцію переказу. - - Transaction creation failed! - - - - The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. - - - - Warning: Invalid Bitcoin address - - (no label) (немає назви) - - Warning: Unknown change address - - Are you sure you want to send? Ви впевнені, що хочете відправити? - - added as transaction fee - - - - Payment request expired - - - - Invalid payment address %1 - - - + SendCoinsEntry @@ -1921,10 +1353,6 @@ Address: %4 Choose previously used address Обрати ранiш використовувану адресу - - This is a normal payment. - - Alt+A Alt+A @@ -1937,34 +1365,10 @@ Address: %4 Alt+P Alt+P - - Remove this entry - - Message: Повідомлення: - - This is a verified payment request. - - - - Enter a label for this address to add it to the list of used addresses - - - - A message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network. - - - - This is an unverified payment request. - - - - Pay To: - - Memo: Нотатка: @@ -1972,15 +1376,7 @@ Address: %4 ShutdownWindow - - Bitcoin Core is shutting down... - - - - Do not shut down the computer until this window disappears. - - - + SignVerifyMessageDialog @@ -1993,7 +1389,7 @@ Address: %4 You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. - Ви можете зареєструватися повідомленнями зі своїми адресами, щоб довести, що ви є їх власником. Будьте обережні, щоб не підписувати що-небудь неясне, як фішинг-атак може спробувати обдурити вас в підписанні вашу особистість до них. Тільки підписати повністю докладні свідчення, користувач зобов'язується. + Ви можете зареєструватися повідомленнями зі своїми адресами, щоб довести, що ви є їх власником. Будьте обережні, щоб не підписувати що-небудь неясне, як фішинг-атак може спробувати обдурити вас в підписанні вашу особистість до них. Тільки підписати повністю докладні свідчення, користувач зобов'язується. The address to sign the message with (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) @@ -2072,7 +1468,7 @@ Address: %4 Введіть адресу Bitcoin (наприклад 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - Click "Sign Message" to generate signature + Click "Sign Message" to generate signature Натисніть кнопку «Підписати повідомлення», для отримання підпису @@ -2130,10 +1526,6 @@ Address: %4 Bitcoin Core Bitcoin Ядро - - The Bitcoin Core developers - - [testnet] [тестова мережа] @@ -2152,10 +1544,6 @@ Address: %4 Open until %1 Відкрити до %1 - - conflicted - - %1/offline %1/поза інтернетом @@ -2172,10 +1560,6 @@ Address: %4 Status Статус - - , broadcast through %n node(s) - - Date Дата @@ -2208,10 +1592,6 @@ Address: %4 Credit Кредит - - matures in %n more block(s) - - not accepted не прийнято @@ -2240,14 +1620,6 @@ Address: %4 Transaction ID ID транзакції - - Merchant - - - - Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours. - - Debug information Отладочна інформація @@ -2276,10 +1648,6 @@ Address: %4 , has not been successfully broadcast yet , ще не було успішно розіслано - - Open for %n more block(s) - - unknown невідомий @@ -2314,14 +1682,6 @@ Address: %4 Amount Кількість - - Immature (%1 confirmations, will be available after %2) - - - - Open for %n more block(s) - - Open until %1 Відкрити до %1 @@ -2338,22 +1698,6 @@ Address: %4 Generated but not accepted Згенеровано, але не підтверджено - - Offline - - - - Unconfirmed - - - - Confirming (%1 of %2 recommended confirmations) - - - - Conflicted - - Received with Отримано @@ -2481,26 +1825,6 @@ Address: %4 Show transaction details Показати деталі транзакції - - Export Transaction History - - - - Exporting Failed - - - - There was an error trying to save the transaction history to %1. - - - - Exporting Successful - - - - The transaction history was successfully saved to %1. - - Comma separated file (*.csv) Файли, розділені комою (*.csv) @@ -2544,11 +1868,7 @@ Address: %4 WalletFrame - - No wallet has been loaded. - - - + WalletModel @@ -2578,14 +1898,6 @@ Address: %4 Backup Failed Помилка резервного копіювання - - There was an error trying to save the wallet data to %1. - - - - The wallet data was successfully saved to %1. - - Backup Successful Успішне створення резервної копії @@ -2623,15 +1935,15 @@ Address: %4 Listen for connections on <port> (default: 8333 or testnet: 18333) - Чекати на з'єднання на <port> (типово: 8333 або тестова мережа: 18333) + Чекати на з'єднання на <port> (типово: 8333 або тестова мережа: 18333) Maintain at most <n> connections to peers (default: 125) - Підтримувати не більше <n> зв'язків з колегами (типово: 125) + Підтримувати не більше <n> зв'язків з колегами (типово: 125) Connect to a node to retrieve peer addresses, and disconnect - Підключитись до вузла, щоб отримати список адрес інших учасників та від'єднатись + Підключитись до вузла, щоб отримати список адрес інших учасників та від'єднатись Specify your own public address @@ -2639,28 +1951,20 @@ Address: %4 Threshold for disconnecting misbehaving peers (default: 100) - Поріг відключення неправильно під'єднаних пірів (типово: 100) + Поріг відключення неправильно під'єднаних пірів (типово: 100) Number of seconds to keep misbehaving peers from reconnecting (default: 86400) - Максимальній розмір вхідного буферу на одне з'єднання (типово: 86400) - - - An error occurred while setting up the RPC port %u for listening on IPv4: %s - + Максимальній розмір вхідного буферу на одне з'єднання (типово: 86400) Listen for JSON-RPC connections on <port> (default: 8332 or testnet: 18332) - Прослуховувати <port> для JSON-RPC-з'єднань (типово: 8332 або тестова мережа: 18332) + Прослуховувати <port> для JSON-RPC-з'єднань (типово: 8332 або тестова мережа: 18332) Accept command line and JSON-RPC commands Приймати команди із командного рядка та команди JSON-RPC - - Bitcoin Core RPC client version - - Run in the background as a daemon and accept commands Запустити в фоновому режимі (як демон) та приймати команди @@ -2671,113 +1975,31 @@ Address: %4 Accept connections from outside (default: 1 if no -proxy or -connect) - Приймати з'єднання ззовні (за замовчуванням: 1, якщо ні-проксі або-з'єднання) - - - %s, you must set a rpcpassword in the configuration file: -%s -It is recommended you use the following random password: -rpcuser=bitcoinrpc -rpcpassword=%s -(you do not need to remember this password) -The username and password MUST NOT be the same. -If the file does not exist, create it with owner-readable-only file permissions. -It is also recommended to set alertnotify so you are notified of problems; -for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com - - - - - Acceptable ciphers (default: TLSv1.2+HIGH:TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH) - - - - An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %s - + Приймати з'єднання ззовні (за замовчуванням: 1, якщо ні-проксі або-з'єднання) Bind to given address and always listen on it. Use [host]:port notation for IPv6 - Прив'язка до даного адресою і завжди слухати на ньому. Використовуйте [господаря]: позначення порту для IPv6 - - - Continuously rate-limit free transactions to <n>*1000 bytes per minute (default:15) - + Прив'язка до даного адресою і завжди слухати на ньому. Використовуйте [господаря]: позначення порту для IPv6 Enter regression test mode, which uses a special chain in which blocks can be solved instantly. This is intended for regression testing tools and app development. Введіть тестовий режим регресії, яка використовує спеціальну ланцюг, в якій блоки можуть бути вирішені негайно. Це призначено для регресійного тестування інструментів і розробки додатків. - - Enter regression test mode, which uses a special chain in which blocks can be solved instantly. - - - - Error: Listening for incoming connections failed (listen returned error %d) - - Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. Помилка: транзакцію було відхилено. Це може статись, якщо декілька монет з вашого гаманця вже використані, наприклад, якщо ви використовуєте одну копію гаманця (wallet.dat), а монети були використані з іншої копії, але не позначені як використані в цій. - - Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds! - - - - Execute command when a wallet transaction changes (%s in cmd is replaced by TxID) - - - - Fees smaller than this are considered zero fee (for transaction creation) (default: - - - - Flush database activity from memory pool to disk log every <n> megabytes (default: 100) - - - - How thorough the block verification of -checkblocks is (0-4, default: 3) - - - - In this mode -genproclimit controls how many blocks are generated immediately. - - - - Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d) - - - - Set the processor limit for when generation is on (-1 = unlimited, default: -1) - - This is a pre-release test build - use at your own risk - do not use for mining or merchant applications Це тест збірки попередньою версією - використовуйте на свій страх і ризик - не використовувати для гірничодобувних або торгових додатків - - Unable to bind to %s on this computer. Bitcoin Core is probably already running. - - - - Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: -proxy) - - Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction. Увага: встановлено занадто велику комісію (-paytxfee). Комісія зніматиметься кожен раз коли ви проводитимете транзакції. - Warning: Please check that your computer's date and time are correct! If your clock is wrong Bitcoin will not work properly. - Увага: будь ласка, перевірте дату і час на своєму комп'ютері. Якщо ваш годинник йде неправильно, Bitcoin може працювати некоректно. - - - Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues. - - - - Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade. - + Warning: Please check that your computer's date and time are correct! If your clock is wrong Bitcoin will not work properly. + Увага: будь ласка, перевірте дату і час на своєму комп'ютері. Якщо ваш годинник йде неправильно, Bitcoin може працювати некоректно. Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect. @@ -2787,70 +2009,26 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup. Увага: файл wallet.dat пошкоджено, дані врятовано! Оригінальний wallet.dat збережено як wallet.{timestamp}.bak до %s; якщо Ваш баланс чи транзакції неправильні, Ви можете відновити їх з резервної копії. - - (default: 1) - - - - (default: wallet.dat) - - - - <category> can be: - - Attempt to recover private keys from a corrupt wallet.dat Спроба відновити закриті ключі з пошкодженого wallet.dat - - Bitcoin Core Daemon - - Block creation options: Опції створення блоку: - - Clear list of wallet transactions (diagnostic tool; implies -rescan) - - Connect only to the specified node(s) Підключитись лише до вказаного вузла - - Connect through SOCKS proxy - - - - Connect to JSON-RPC on <port> (default: 8332 or testnet: 18332) - - - - Connection options: - - Corrupted block database detected Виявлено пошкоджений блок бази даних - - Debugging/Testing options: - - - - Disable safemode, override a real safe mode event (default: 0) - - Discover own IP address (default: 1 when listening and no -externalip) Відкрийте власну IP-адресу (за замовчуванням: 1, коли не чує і-externalip) - - Do not load the wallet and disable wallet RPC calls - - Do you want to rebuild the block database now? Ви хочете перебудувати базу даних блоку зараз? @@ -2859,10 +2037,6 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Error initializing block database Помилка ініціалізації бази даних блоків - - Error initializing wallet database environment %s! - - Error loading block database Помилка завантаження бази даних блоків @@ -2931,18 +2105,10 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Fee per kB to add to transactions you send Комісія за Кб - - Fees smaller than this are considered zero fee (for relaying) (default: - - Find peers using DNS lookup (default: 1 unless -connect) Знайти однолітків за допомогою DNS пошук (за замовчуванням: 1, якщо-ні підключити) - - Force safe mode (default: 0) - - Generate coins (default: 0) Генерація монети (за замовчуванням: 0) @@ -2951,66 +2117,14 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. How many blocks to check at startup (default: 288, 0 = all) Скільки блоків перевіряти під час запуску (типово: 288, 0 = всі) - - If <category> is not supplied, output all debugging information. - - - - Importing... - - - - Incorrect or no genesis block found. Wrong datadir for network? - - - - Invalid -onion address: '%s' - - Not enough file descriptors available. Бракує дескрипторів файлів, доступних. - - Prepend debug output with timestamp (default: 1) - - - - RPC client options: - - - - Rebuild block chain index from current blk000??.dat files - - - - Select SOCKS version for -proxy (4 or 5, default: 5) - - - - Set database cache size in megabytes (%d to %d, default: %d) - - - - Set maximum block size in bytes (default: %d) - - Set the number of threads to service RPC calls (default: 4) Встановити число потоків до дзвінків служба RPC (за замовчуванням: 4) - - Specify wallet file (within data directory) - - - - Spend unconfirmed change when sending transactions (default: 1) - - - - This is intended for regression testing tools and app development. - - Usage (deprecated, use bitcoin-cli): Використання (застаріле, використовуйте bitcoin-cli): @@ -3023,66 +2137,14 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Verifying wallet... Перевірка гаманця... - - Wait for RPC server to start - - - - Wallet %s resides outside data directory %s - - - - Wallet options: - - - - Warning: Deprecated argument -debugnet ignored, use -debug=net - - - - You need to rebuild the database using -reindex to change -txindex - - Imports blocks from external blk000??.dat file Імпорт блоків з зовнішнього файлу blk000??.dat - - Cannot obtain a lock on data directory %s. Bitcoin Core is probably already running. - - - - Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message) - - - - Output debugging information (default: 0, supplying <category> is optional) - - - - Set maximum size of high-priority/low-fee transactions in bytes (default: %d) - - Information Інформація - - Invalid amount for -minrelaytxfee=<amount>: '%s' - - - - Invalid amount for -mintxfee=<amount>: '%s' - - - - Limit size of signature cache to <n> entries (default: 50000) - - - - Log transaction priority and fee per kB when mining blocks (default: 0) - - Maintain a full transaction index (default: 0) Підтримувати індекс повний транзакцій (за замовчуванням: 0) @@ -3093,7 +2155,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Maximum per-connection send buffer, <n>*1000 bytes (default: 1000) - Максимальній розмір вихідного буферу на одне з'єднання, <n>*1000 байт (типово: 1000) + Максимальній розмір вихідного буферу на одне з'єднання, <n>*1000 байт (типово: 1000) Only accept block chain matching built-in checkpoints (default: 1) @@ -3103,42 +2165,10 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Only connect to nodes in network <net> (IPv4, IPv6 or Tor) Підключити тільки до вузлів в мережі <net> (IPv4, IPv6 або Tor) - - Print block on startup, if found in block index - - - - Print block tree on startup (default: 0) - - - - RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions) - - - - RPC server options: - - - - Randomly drop 1 of every <n> network messages - - - - Randomly fuzz 1 of every <n> network messages - - - - Run a thread to flush wallet periodically (default: 1) - - SSL options: (see the Bitcoin Wiki for SSL setup instructions) Параметри SSL: (див. Bitcoin Wiki для налаштування SSL) - - Send command to Bitcoin Core - - Send trace/debug info to console instead of debug.log file Відсилати налагоджувальну інформацію на консоль, а не у файл debug.log @@ -3147,18 +2177,6 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Set minimum block size in bytes (default: 0) Встановити мінімальний розмір блоку у байтах (типово: 0) - - Sets the DB_PRIVATE flag in the wallet db environment (default: 1) - - - - Show all debugging options (usage: --help -help-debug) - - - - Show benchmark information (default: 0) - - Shrink debug.log file on client startup (default: 1 when no -debug) Стискати файл debug.log під час старту клієнта (типово: 1 коли відсутутній параметр -debug) @@ -3171,10 +2189,6 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Specify connection timeout in milliseconds (default: 5000) Вказати тайм-аут підключення у мілісекундах (типово: 5000) - - Start Bitcoin Core Daemon - - System error: Системна помилка: @@ -3201,7 +2215,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Username for JSON-RPC connections - Ім'я користувача для JSON-RPC-з'єднань + Ім'я користувача для JSON-RPC-з'єднань Warning @@ -3211,14 +2225,6 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Warning: This version is obsolete, upgrade required! Увага: Поточна версія застаріла, необхідне оновлення! - - Zapping all transactions from wallet... - - - - on startup - - version версія @@ -3229,11 +2235,11 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Password for JSON-RPC connections - Пароль для JSON-RPC-з'єднань + Пароль для JSON-RPC-з'єднань Allow JSON-RPC connections from specified IP address - Дозволити JSON-RPC-з'єднання з вказаної IP-адреси + Дозволити JSON-RPC-з'єднання з вказаної IP-адреси Send commands to node running on <ip> (default: 127.0.0.1) @@ -3241,7 +2247,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Execute command when the best block changes (%s in cmd is replaced by block hash) - Виконати команду, коли з'явиться новий блок (%s в команді змінюється на хеш блоку) + Виконати команду, коли з'явиться новий блок (%s в команді змінюється на хеш блоку) Upgrade wallet to latest format @@ -3257,7 +2263,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Use OpenSSL (https) for JSON-RPC connections - Використовувати OpenSSL (https) для JSON-RPC-з'єднань + Використовувати OpenSSL (https) для JSON-RPC-з'єднань Server certificate file (default: server.cert) @@ -3273,7 +2279,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Unable to bind to %s on this computer (bind returned error %d, %s) - Неможливо прив'язати до порту %s на цьому комп'ютері (bind returned error %d, %s) + Неможливо прив'язати до порту %s на цьому комп'ютері (bind returned error %d, %s) Allow DNS lookups for -addnode, -seednode and -connect @@ -3300,11 +2306,11 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Помилка при завантаженні wallet.dat - Invalid -proxy address: '%s' + Invalid -proxy address: '%s' Помилка в адресі проксі-сервера: «%s» - Unknown network specified in -onlynet: '%s' + Unknown network specified in -onlynet: '%s' Невідома мережа вказана в -onlynet: «%s» @@ -3312,15 +2318,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. В параметрі -socks запитується невідома версія: %i - Cannot resolve -bind address: '%s' - - - - Cannot resolve -externalip address: '%s' - - - - Invalid amount for -paytxfee=<amount>: '%s' + Invalid amount for -paytxfee=<amount>: '%s' Помилка у величині комісії -paytxfee=<amount>: «%s» -- cgit v1.2.3