From 6f5d33b3d2901799311d8596c394a45211ff978f Mon Sep 17 00:00:00 2001 From: "Wladimir J. van der Laan" Date: Thu, 28 Aug 2014 13:10:32 +0200 Subject: Update translations after update script improvements --- src/qt/locale/bitcoin_hi_IN.ts | 3139 +++++----------------------------------- 1 file changed, 347 insertions(+), 2792 deletions(-) (limited to 'src/qt/locale/bitcoin_hi_IN.ts') diff --git a/src/qt/locale/bitcoin_hi_IN.ts b/src/qt/locale/bitcoin_hi_IN.ts index 3ccac8899e..28778a0258 100644 --- a/src/qt/locale/bitcoin_hi_IN.ts +++ b/src/qt/locale/bitcoin_hi_IN.ts @@ -1,36 +1,4 @@ - - - AboutDialog - - About Bitcoin Core - - - - <b>Bitcoin Core</b> version - - - - -This is experimental software. - -Distributed under the MIT/X11 software license, see the accompanying file COPYING or http://www.opensource.org/licenses/mit-license.php. - -This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) and cryptographic software written by Eric Young (eay@cryptsoft.com) and UPnP software written by Thomas Bernard. - - - - Copyright - कापीराइट - - - The Bitcoin Core developers - - - - (%1-bit) - - - + AddressBookPage @@ -41,70 +9,18 @@ This product includes software developed by the OpenSSL Project for use in the O Create a new address नया पता लिखिए ! - - &New - - Copy the currently selected address to the system clipboard चुनिन्दा पते को सिस्टम क्लिपबोर्ड पर कापी करे ! - - &Copy - - - - C&lose - - &Copy Address &पता कॉपी करे - - Delete the currently selected address from the list - - - - Export the data in the current tab to a file - - - - &Export - - &Delete &मिटाए !! - - Choose the address to send coins to - - - - Choose the address to receive coins with - - - - C&hoose - - - - Sending addresses - - - - Receiving addresses - - - - These are your Bitcoin addresses for sending payments. Always check the amount and the receiving address before sending coins. - - - - These are your Bitcoin addresses for receiving payments. It is recommended to use a new receiving address for each transaction. - - Copy &Label &लेबल कॉपी करे @@ -113,23 +29,11 @@ This product includes software developed by the OpenSSL Project for use in the O &Edit &एडिट - - Export Address List - - Comma separated file (*.csv) Comma separated file (*.csv) - - Exporting Failed - - - - There was an error trying to save the address list to %1. - - - + AddressTableModel @@ -147,10 +51,6 @@ This product includes software developed by the OpenSSL Project for use in the O AskPassphraseDialog - - Passphrase Dialog - - Enter passphrase पहचान शब्द/अक्षर डालिए ! @@ -163,10 +63,6 @@ This product includes software developed by the OpenSSL Project for use in the O Repeat new passphrase दोबारा नया पहचान शब्द/अक्षर डालिए ! - - Enter the new passphrase to the wallet.<br/>Please use a passphrase of <b>10 or more random characters</b>, or <b>eight or more words</b>. - नया पहचान शब्द/अक्षर वॉलेट मे डालिए ! <br/> कृपा करके पहचान शब्द में <br> 10 से ज़्यादा अक्षॉरों का इस्तेमाल करे </b>,या <b>आठ या उससे से ज़्यादा शब्दो का इस्तेमाल करे</b> ! - Encrypt wallet एनक्रिप्ट वॉलेट ! @@ -199,30 +95,10 @@ This product includes software developed by the OpenSSL Project for use in the O Confirm wallet encryption वॉलेट एनक्रिपशन को प्रमाणित कीजिए ! - - Warning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR BITCOINS</b>! - - - - Are you sure you wish to encrypt your wallet? - - - - IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet. - - - - Warning: The Caps Lock key is on! - - Wallet encrypted वॉलेट एनक्रिप्ट हो गया ! - - Bitcoin will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer. - - Wallet encryption failed वॉलेट एनक्रिप्ट नही हुआ! @@ -247,17 +123,9 @@ This product includes software developed by the OpenSSL Project for use in the O Wallet decryption failed वॉलेट का डीक्रिप्ट-ष्ण असफल ! - - Wallet passphrase was successfully changed. - - - + BitcoinGUI - - Sign &message... - - Synchronizing with network... नेटवर्क से समकालिक (मिल) रहा है ... @@ -266,10 +134,6 @@ This product includes software developed by the OpenSSL Project for use in the O &Overview &विवरण - - Node - - Show general overview of wallet वॉलेट का सामानया विवरण दिखाए ! @@ -291,82 +155,18 @@ This product includes software developed by the OpenSSL Project for use in the O Quit application अप्लिकेशन से बाहर निकलना ! - - Show information about Bitcoin - बीटकोइन के बारे में जानकारी ! - - - About &Qt - - - - Show information about Qt - - &Options... &विकल्प - - &Encrypt Wallet... - - &Backup Wallet... &बैकप वॉलेट - - &Change Passphrase... - - - - &Sending addresses... - - - - &Receiving addresses... - - - - Open &URI... - - - - Importing blocks from disk... - - - - Reindexing blocks on disk... - - - - Send coins to a Bitcoin address - - - - Modify configuration options for Bitcoin - - - - Backup wallet to another location - - Change the passphrase used for wallet encryption पहचान शब्द/अक्षर जो वॉलेट एनक्रिपशन के लिए इस्तेमाल किया है उसे बदलिए! - - &Debug window - - - - Open debugging and diagnostic console - - - - &Verify message... - - Bitcoin बीटकोइन @@ -375,34 +175,6 @@ This product includes software developed by the OpenSSL Project for use in the O Wallet वॉलेट - - &Send - - - - &Receive - - - - &Show / Hide - - - - Show or hide the main Window - - - - Encrypt the private keys that belong to your wallet - - - - Sign messages with your Bitcoin addresses to prove you own them - - - - Verify messages to ensure they were signed with specified Bitcoin addresses - - &File &फाइल @@ -423,58 +195,10 @@ This product includes software developed by the OpenSSL Project for use in the O [testnet] [टेस्टनेट] - - Bitcoin Core - - - - Request payments (generates QR codes and bitcoin: URIs) - - - - &About Bitcoin Core - - - - Show the list of used sending addresses and labels - - - - Show the list of used receiving addresses and labels - - - - Open a bitcoin: URI or payment request - - - - &Command-line options - - - - Show the Bitcoin Core help message to get a list with possible Bitcoin command-line options - - - - Bitcoin client - - %n active connection(s) to Bitcoin network %n सक्रिया संपर्क बीटकोइन नेटवर्क से%n सक्रिया संपर्क बीटकोइन नेटवर्क से - - No block source available... - - - - Processed %1 of %2 (estimated) blocks of transaction history. - - - - Processed %1 blocks of transaction history. - - %n hour(s) %n घंटा%n घंटे @@ -487,26 +211,10 @@ This product includes software developed by the OpenSSL Project for use in the O %n week(s) %n हफ़्ता%n हफ्ते - - %1 and %2 - - - - %n year(s) - - %1 behind %1 पीछे - - Last received block was generated %1 ago. - - - - Transactions after this will not yet be visible. - - Error भूल @@ -523,10 +231,6 @@ This product includes software developed by the OpenSSL Project for use in the O Up to date नवीनतम - - Catching up... - - Sent transaction भेजी ट्रांजक्शन @@ -554,68 +258,16 @@ Address: %4 Wallet is <b>encrypted</b> and currently <b>locked</b> वॉलेट एन्क्रिप्टेड है तथा अभी लॉक्ड है - - A fatal error occurred. Bitcoin can no longer continue safely and will quit. - - ClientModel - - Network Alert - - - + CoinControlDialog - - Coin Control Address Selection - - - - Quantity: - - - - Bytes: - - Amount: राशि : - - Priority: - - - - Fee: - - - - Low Output: - - - - After Fee: - - - - Change: - - - - (un)select all - - - - Tree mode - - - - List mode - - Amount राशि @@ -628,18 +280,10 @@ Address: %4 Date taareek - - Confirmations - - Confirmed पक्का - - Priority - - Copy address पता कॉपी करे @@ -653,1870 +297,157 @@ Address: %4 कॉपी राशि - Copy transaction ID - + (no label) + (कोई लेबल नही !) + + + EditAddressDialog - Lock unspent - + Edit Address + पता एडिट करना - Unlock unspent - + &Label + &लेबल - Copy quantity - + &Address + &पता - Copy fee - + New receiving address + नया स्वीकार्य पता - Copy after fee - + New sending address + नया भेजने वाला पता - Copy bytes - + Edit receiving address + एडिट स्वीकार्य पता - Copy priority - + Edit sending address + एडिट भेजने वाला पता - Copy low output - + The entered address "%1" is already in the address book. + डाला गया पता "%1" एड्रेस बुक में पहले से ही मोजूद है| - Copy change - + Could not unlock wallet. + वॉलेट को unlock नहीं किया जा सकता| - highest - + New key generation failed. + नयी कुंजी का निर्माण असफल रहा| + + + FreespaceChecker + + + HelpMessageDialog - higher - + version + संस्करण - high - + Usage: + खपत : + + + Intro - medium-high - + Error + भूल + + + OpenURIDialog + + + OptionsDialog - medium - + Options + विकल्प - low-medium - + &OK + &ओके - low - + &Cancel + &कैन्सल + + + OverviewPage - lower - + Form + फार्म - lowest - + Wallet + वॉलेट - (%1 locked) - + <b>Recent transactions</b> + <b>हाल का लेन-देन</b> + + + PaymentServer + + + PeerTableModel + + + QObject - none - + Amount + राशि - Dust - + N/A + लागू नही + + + + QRImageWidget + + + RPCConsole - yes - + N/A + लागू नही + - no - + &Information + जानकारी + + + ReceiveCoinsDialog - This label turns red, if the transaction size is greater than 1000 bytes. - + &Label: + लेबल: - This means a fee of at least %1 per kB is required. - - - - Can vary +/- 1 byte per input. - - - - Transactions with higher priority are more likely to get included into a block. - - - - This label turns red, if the priority is smaller than "medium". - - - - This label turns red, if any recipient receives an amount smaller than %1. - - - - This means a fee of at least %1 is required. - - - - Amounts below 0.546 times the minimum relay fee are shown as dust. - - - - This label turns red, if the change is smaller than %1. - - - - (no label) - (कोई लेबल नही !) - - - change from %1 (%2) - - - - (change) - - - - - EditAddressDialog - - Edit Address - पता एडिट करना - - - &Label - &लेबल - - - The label associated with this address list entry - - - - The address associated with this address list entry. This can only be modified for sending addresses. - - - - &Address - &पता - - - New receiving address - नया स्वीकार्य पता - - - New sending address - नया भेजने वाला पता - - - Edit receiving address - एडिट स्वीकार्य पता - - - Edit sending address - एडिट भेजने वाला पता - - - The entered address "%1" is already in the address book. - डाला गया पता "%1" एड्रेस बुक में पहले से ही मोजूद है| - - - The entered address "%1" is not a valid Bitcoin address. - - - - Could not unlock wallet. - वॉलेट को unlock नहीं किया जा सकता| - - - New key generation failed. - नयी कुंजी का निर्माण असफल रहा| - - - - FreespaceChecker - - A new data directory will be created. - - - - name - - - - Directory already exists. Add %1 if you intend to create a new directory here. - - - - Path already exists, and is not a directory. - - - - Cannot create data directory here. - - - - - HelpMessageDialog - - Bitcoin Core - Command-line options - - - - Bitcoin Core - - - - version - संस्करण - - - Usage: - खपत : - - - command-line options - - - - UI options - - - - Set language, for example "de_DE" (default: system locale) - - - - Start minimized - - - - Set SSL root certificates for payment request (default: -system-) - - - - Show splash screen on startup (default: 1) - - - - Choose data directory on startup (default: 0) - - - - - Intro - - Welcome - - - - Welcome to Bitcoin Core. - - - - As this is the first time the program is launched, you can choose where Bitcoin Core will store its data. - - - - Bitcoin Core will download and store a copy of the Bitcoin block chain. At least %1GB of data will be stored in this directory, and it will grow over time. The wallet will also be stored in this directory. - - - - Use the default data directory - - - - Use a custom data directory: - - - - Bitcoin - बीटकोइन - - - Error: Specified data directory "%1" can not be created. - - - - Error - - - - GB of free space available - - - - (of %1GB needed) - - - - - OpenURIDialog - - Open URI - - - - Open payment request from URI or file - - - - URI: - - - - Select payment request file - - - - Select payment request file to open - - - - - OptionsDialog - - Options - विकल्प - - - &Main - - - - Optional transaction fee per kB that helps make sure your transactions are processed quickly. Most transactions are 1 kB. - - - - Pay transaction &fee - - - - Automatically start Bitcoin after logging in to the system. - - - - &Start Bitcoin on system login - - - - Size of &database cache - - - - MB - - - - Number of script &verification threads - - - - Connect to the Bitcoin network through a SOCKS proxy. - - - - &Connect through SOCKS proxy (default proxy): - - - - IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1) - - - - Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |. - - - - Third party transaction URLs - - - - Active command-line options that override above options: - - - - Reset all client options to default. - - - - &Reset Options - - - - &Network - - - - (0 = auto, <0 = leave that many cores free) - - - - W&allet - - - - Expert - - - - Enable coin &control features - - - - If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed. - - - - &Spend unconfirmed change - - - - Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled. - - - - Map port using &UPnP - - - - Proxy &IP: - - - - &Port: - - - - Port of the proxy (e.g. 9050) - - - - SOCKS &Version: - - - - SOCKS version of the proxy (e.g. 5) - - - - &Window - - - - Show only a tray icon after minimizing the window. - - - - &Minimize to the tray instead of the taskbar - - - - Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Quit in the menu. - - - - M&inimize on close - - - - &Display - - - - User Interface &language: - - - - The user interface language can be set here. This setting will take effect after restarting Bitcoin. - - - - &Unit to show amounts in: - - - - Choose the default subdivision unit to show in the interface and when sending coins. - - - - Whether to show Bitcoin addresses in the transaction list or not. - - - - &Display addresses in transaction list - - - - Whether to show coin control features or not. - - - - &OK - &ओके - - - &Cancel - &कैन्सल - - - default - - - - none - - - - Confirm options reset - - - - Client restart required to activate changes. - - - - Client will be shutdown, do you want to proceed? - - - - This change would require a client restart. - - - - The supplied proxy address is invalid. - - - - - OverviewPage - - Form - फार्म - - - The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet. - - - - Wallet - वॉलेट - - - Available: - - - - Your current spendable balance - - - - Pending: - - - - Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance - - - - Immature: - - - - Mined balance that has not yet matured - - - - Total: - - - - Your current total balance - - - - <b>Recent transactions</b> - <b>हाल का लेन-देन</b> - - - out of sync - - - - - PaymentServer - - URI handling - - - - URI can not be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters. - - - - Requested payment amount of %1 is too small (considered dust). - - - - Payment request error - - - - Cannot start bitcoin: click-to-pay handler - - - - Net manager warning - - - - Your active proxy doesn't support SOCKS5, which is required for payment requests via proxy. - - - - Payment request fetch URL is invalid: %1 - - - - Payment request file handling - - - - Payment request file can not be read or processed! This can be caused by an invalid payment request file. - - - - Unverified payment requests to custom payment scripts are unsupported. - - - - Refund from %1 - - - - Error communicating with %1: %2 - - - - Payment request can not be parsed or processed! - - - - Bad response from server %1 - - - - Payment acknowledged - - - - Network request error - - - - - QObject - - Bitcoin - बीटकोइन - - - Error: Specified data directory "%1" does not exist. - - - - Error: Cannot parse configuration file: %1. Only use key=value syntax. - - - - Error: Invalid combination of -regtest and -testnet. - - - - Bitcoin Core didn't yet exit safely... - - - - Enter a Bitcoin address (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - Bitcoin एड्रेस लिखें (उदाहरण: 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - - - - QRImageWidget - - &Save Image... - - - - &Copy Image - - - - Save QR Code - - - - PNG Image (*.png) - - - - - RPCConsole - - Client name - - - - N/A - लागू नही - - - - Client version - - - - &Information - - - - Debug window - - - - General - - - - Using OpenSSL version - - - - Startup time - - - - Network - - - - Name - - - - Number of connections - - - - Block chain - - - - Current number of blocks - - - - Estimated total blocks - - - - Last block time - - - - &Open - - - - &Console - - - - &Network Traffic - - - - &Clear - - - - Totals - - - - In: - - - - Out: - - - - Build date - - - - Debug log file - - - - Open the Bitcoin debug log file from the current data directory. This can take a few seconds for large log files. - - - - Clear console - - - - Welcome to the Bitcoin RPC console. - - - - Use up and down arrows to navigate history, and <b>Ctrl-L</b> to clear screen. - - - - Type <b>help</b> for an overview of available commands. - - - - %1 B - - - - %1 KB - - - - %1 MB - - - - %1 GB - - - - %1 m - - - - %1 h - - - - %1 h %2 m - - - - - ReceiveCoinsDialog - - &Amount: - - - - &Label: - लेबल: - - - &Message: - - - - Reuse one of the previously used receiving addresses. Reusing addresses has security and privacy issues. Do not use this unless re-generating a payment request made before. - - - - R&euse an existing receiving address (not recommended) - - - - An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network. - - - - An optional label to associate with the new receiving address. - - - - Use this form to request payments. All fields are <b>optional</b>. - - - - An optional amount to request. Leave this empty or zero to not request a specific amount. - - - - Clear all fields of the form. - - - - Clear - - - - Requested payments history - - - - &Request payment - - - - Show the selected request (does the same as double clicking an entry) - - - - Show - - - - Remove the selected entries from the list - - - - Remove - - - - Copy label - लेबल कॉपी करे - - - Copy message - - - - Copy amount - कॉपी राशि - - - - ReceiveRequestDialog - - QR Code - - - - Copy &URI - - - - Copy &Address - - - - &Save Image... - - - - Request payment to %1 - - - - Payment information - - - - URI - - - - Address - पता - - - Amount - राशि - - - Label - लेबल - - - Message - - - - Resulting URI too long, try to reduce the text for label / message. - - - - Error encoding URI into QR Code. - - - - - RecentRequestsTableModel - - Date - taareek - - - Label - लेबल - - - Message - - - - Amount - राशि - - - (no label) - (कोई लेबल नही !) - - - (no message) - - - - (no amount) - - - - - SendCoinsDialog - - Send Coins - सिक्के भेजें| - - - Coin Control Features - - - - Inputs... - - - - automatically selected - - - - Insufficient funds! - - - - Quantity: - - - - Bytes: - - - - Amount: - राशि : - - - Priority: - - - - Fee: - - - - Low Output: - - - - After Fee: - - - - Change: - - - - If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address. - - - - Custom change address - - - - Send to multiple recipients at once - एक साथ कई प्राप्तकर्ताओं को भेजें - - - Add &Recipient - - - - Clear all fields of the form. - - - - Clear &All - - - - Balance: - बाकी रकम : - - - Confirm the send action - भेजने की पुष्टि करें - - - S&end - - - - Confirm send coins - सिक्के भेजने की पुष्टि करें - - - %1 to %2 - - - - Copy quantity - - - - Copy amount - कॉपी राशि - - - Copy fee - - - - Copy after fee - - - - Copy bytes - - - - Copy priority - - - - Copy low output - - - - Copy change - - - - Total Amount %1 (= %2) - - - - or - - - - The recipient address is not valid, please recheck. - - - - The amount to pay must be larger than 0. - भेजा गया अमाउंट शुन्य से अधिक होना चाहिए| - - - The amount exceeds your balance. - - - - The total exceeds your balance when the %1 transaction fee is included. - - - - Duplicate address found, can only send to each address once per send operation. - - - - Transaction creation failed! - - - - The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. - - - - Warning: Invalid Bitcoin address - - - - (no label) - (कोई लेबल नही !) - - - Warning: Unknown change address - - - - Are you sure you want to send? - - - - added as transaction fee - - - - Payment request expired - - - - Invalid payment address %1 - - - - - SendCoinsEntry - - A&mount: - अमाउंट: - - - Pay &To: - प्राप्तकर्ता: - - - The address to send the payment to (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - - - - Enter a label for this address to add it to your address book - आपकी एड्रेस बुक में इस एड्रेस के लिए एक लेबल लिखें - - - &Label: - लेबल: - - - Choose previously used address - - - - This is a normal payment. - - - - Alt+A - Alt-A - - - Paste address from clipboard - Clipboard से एड्रेस paste करें - - - Alt+P - Alt-P - - - Remove this entry - - - - Message: - - - - This is a verified payment request. - - - - Enter a label for this address to add it to the list of used addresses - - - - A message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network. - - - - This is an unverified payment request. - - - - Pay To: - - - - Memo: - - - - - ShutdownWindow - - Bitcoin Core is shutting down... - - - - Do not shut down the computer until this window disappears. - - - - - SignVerifyMessageDialog - - Signatures - Sign / Verify a Message - - - - &Sign Message - - - - You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. - - - - The address to sign the message with (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - - - - Choose previously used address - - - - Alt+A - Alt-A - - - Paste address from clipboard - Clipboard से एड्रेस paste करें - - - Alt+P - Alt-P - - - Enter the message you want to sign here - - - - Signature - हस्ताक्षर - - - Copy the current signature to the system clipboard - - - - Sign the message to prove you own this Bitcoin address - - - - Sign &Message - - - - Reset all sign message fields - - - - Clear &All - - - - &Verify Message - - - - Enter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. - - - - The address the message was signed with (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - - - - Verify the message to ensure it was signed with the specified Bitcoin address - - - - Verify &Message - - - - Reset all verify message fields - - - - Enter a Bitcoin address (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - Bitcoin एड्रेस लिखें (उदाहरण: 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - - - Click "Sign Message" to generate signature - - - - The entered address is invalid. - - - - Please check the address and try again. - - - - The entered address does not refer to a key. - - - - Wallet unlock was cancelled. - - - - Private key for the entered address is not available. - - - - Message signing failed. - - - - Message signed. - - - - The signature could not be decoded. - - - - Please check the signature and try again. - - - - The signature did not match the message digest. - - - - Message verification failed. - - - - Message verified. - - - - - SplashScreen - - Bitcoin Core - - - - The Bitcoin Core developers - - - - [testnet] - - - - - TrafficGraphWidget - - KB/s - - - - - TransactionDesc - - Open until %1 - खुला है जबतक %1 - - - conflicted - - - - %1/offline - - - - %1/unconfirmed - %1/अपुष्ट - - - %1 confirmations - %1 पुष्टियाँ - - - Status - - - - , broadcast through %n node(s) - - - - Date - taareek - - - Source - - - - Generated - - - - From - - - - To - - - - own address - - - - label - - - - Credit - - - - matures in %n more block(s) - - - - not accepted - - - - Debit - - - - Transaction fee - - - - Net amount - - - - Message - - - - Comment - - - - Transaction ID - - - - Merchant - - - - Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours. - - - - Debug information - - - - Transaction - - - - Inputs - - - - Amount - राशि - - - true - सही - - - false - ग़लत - - - , has not been successfully broadcast yet - , अभी तक सफलतापूर्वक प्रसारित नहीं किया गया है - - - Open for %n more block(s) - - - - unknown - अज्ञात - - - - TransactionDescDialog - - Transaction details - लेन-देन का विवरण - - - This pane shows a detailed description of the transaction - ये खिड़की आपको लेन-देन का विस्तृत विवरण देगी ! - - - - TransactionTableModel - - Date - taareek - - - Type - टाइप - - - Address - पता - - - Amount - राशि - - - Immature (%1 confirmations, will be available after %2) - - - - Open for %n more block(s) - - - - Open until %1 - खुला है जबतक %1 - - - Confirmed (%1 confirmations) - पक्के ( %1 पक्का करना) - - - This block was not received by any other nodes and will probably not be accepted! - यह ब्लॉक किसी भी और नोड को मिला नही है ! शायद यह ब्लॉक कोई भी नोड स्वीकारे गा नही ! - - - Generated but not accepted - जेनरेट किया गया किंतु स्वीकारा नही गया ! - - - Offline - - - - Unconfirmed - - - - Confirming (%1 of %2 recommended confirmations) - - - - Conflicted - - - - Received with - स्वीकारा गया - - - Received from - स्वीकार्य ओर से - - - Sent to - भेजा गया - - - Payment to yourself - भेजा खुद को भुगतान - - - Mined - माइंड - - - (n/a) - (लागू नहीं) - - - Transaction status. Hover over this field to show number of confirmations. - ट्रांसेक्शन स्तिथि| पुष्टियों की संख्या जानने के लिए इस जगह पर माउस लायें| - - - Date and time that the transaction was received. - तारीख तथा समय जब ये ट्रांसेक्शन प्राप्त हुई थी| - - - Type of transaction. - ट्रांसेक्शन का प्रकार| - - - Destination address of transaction. - ट्रांसेक्शन की मंजिल का पता| - - - Amount removed from or added to balance. - अमाउंट बैलेंस से निकला या जमा किया गया | - - - - TransactionView - - All - सभी - - - Today - आज - - - This week - इस हफ्ते - - - This month - इस महीने - - - Last month - पिछले महीने - - - This year - इस साल - - - Range... - विस्तार... - - - Received with - स्वीकार करना - - - Sent to - भेजा गया - - - To yourself - अपनेआप को - - - Mined - माइंड - - - Other - अन्य - - - Enter address or label to search - ढूँदने के लिए कृपा करके पता या लेबल टाइप करे ! - - - Min amount - लघुत्तम राशि - - - Copy address - पता कॉपी करे - - - Copy label - लेबल कॉपी करे - - - Copy amount - कॉपी राशि - - - Copy transaction ID - - - - Edit label - एडिट लेबल - - - Show transaction details - - - - Export Transaction History - - - - Exporting Failed - - - - There was an error trying to save the transaction history to %1. - - - - Exporting Successful - - - - The transaction history was successfully saved to %1. - - - - Comma separated file (*.csv) - Comma separated file (*.csv) - - - Confirmed - पक्का - - - Date - taareek - - - Type - टाइप + Copy label + लेबल कॉपी करे - Label - लेबल + Copy amount + कॉपी राशि + + + ReceiveRequestDialog Address पता @@ -2526,827 +457,461 @@ Address: %4 राशि - ID - ID - - - Range: - विस्तार: - - - to - तक - - - - WalletFrame - - No wallet has been loaded. - - - - - WalletModel - - Send Coins - - - - - WalletView - - &Export - - - - Export the data in the current tab to a file - - - - Backup Wallet - बैकप वॉलेट - - - Wallet Data (*.dat) - वॉलेट डेटा (*.dat) - - - Backup Failed - बैकप असफल - - - There was an error trying to save the wallet data to %1. - - - - The wallet data was successfully saved to %1. - - - - Backup Successful - बैकप सफल + Label + लेबल - + - bitcoin-core - - Usage: - खपत : - - - List commands - commands की लिस्ट बनाएं - - - Get help for a command - किसी command के लिए मदद लें - - - Options: - विकल्प: - - - Specify configuration file (default: bitcoin.conf) - configuraion की फाइल का विवरण दें (default: bitcoin.conf) - - - Specify pid file (default: bitcoind.pid) - pid फाइल का विवरण दें (default: bitcoin.pid) - - - Specify data directory - डेटा डायरेक्टरी बताएं - - - Listen for connections on <port> (default: 8333 or testnet: 18333) - - - - Maintain at most <n> connections to peers (default: 125) - - - - Connect to a node to retrieve peer addresses, and disconnect - - - - Specify your own public address - - - - Threshold for disconnecting misbehaving peers (default: 100) - - - - Number of seconds to keep misbehaving peers from reconnecting (default: 86400) - - - - An error occurred while setting up the RPC port %u for listening on IPv4: %s - - - - Listen for JSON-RPC connections on <port> (default: 8332 or testnet: 18332) - - - - Accept command line and JSON-RPC commands - - - - Bitcoin Core RPC client version - - - - Run in the background as a daemon and accept commands - बैकग्राउंड में डेमॉन बन कर रन करे तथा कमांड्स स्वीकार करें - - - Use the test network - टेस्ट नेटवर्क का इस्तेमाल करे - - - Accept connections from outside (default: 1 if no -proxy or -connect) - - - - %s, you must set a rpcpassword in the configuration file: -%s -It is recommended you use the following random password: -rpcuser=bitcoinrpc -rpcpassword=%s -(you do not need to remember this password) -The username and password MUST NOT be the same. -If the file does not exist, create it with owner-readable-only file permissions. -It is also recommended to set alertnotify so you are notified of problems; -for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com - - - - - Acceptable ciphers (default: TLSv1.2+HIGH:TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH) - - - - An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %s - - - - Bind to given address and always listen on it. Use [host]:port notation for IPv6 - - - - Continuously rate-limit free transactions to <n>*1000 bytes per minute (default:15) - - - - Enter regression test mode, which uses a special chain in which blocks can be solved instantly. This is intended for regression testing tools and app development. - - - - Enter regression test mode, which uses a special chain in which blocks can be solved instantly. - - - - Error: Listening for incoming connections failed (listen returned error %d) - - - - Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. - - - - Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds! - - - - Execute command when a wallet transaction changes (%s in cmd is replaced by TxID) - - - - Fees smaller than this are considered zero fee (for transaction creation) (default: - - - - Flush database activity from memory pool to disk log every <n> megabytes (default: 100) - - - - How thorough the block verification of -checkblocks is (0-4, default: 3) - - - - In this mode -genproclimit controls how many blocks are generated immediately. - - - - Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d) - - - - Set the processor limit for when generation is on (-1 = unlimited, default: -1) - - - - This is a pre-release test build - use at your own risk - do not use for mining or merchant applications - - - - Unable to bind to %s on this computer. Bitcoin Core is probably already running. - - - - Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: -proxy) - - - - Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction. - - - - Warning: Please check that your computer's date and time are correct! If your clock is wrong Bitcoin will not work properly. - - - - Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues. - - - - Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade. - - - - Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect. - - - - Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup. - - - - (default: 1) - - - - (default: wallet.dat) - - - - <category> can be: - - - - Attempt to recover private keys from a corrupt wallet.dat - - - - Bitcoin Core Daemon - - - - Block creation options: - - - - Clear list of wallet transactions (diagnostic tool; implies -rescan) - - - - Connect only to the specified node(s) - - - - Connect through SOCKS proxy - - - - Connect to JSON-RPC on <port> (default: 8332 or testnet: 18332) - - - - Connection options: - - - - Corrupted block database detected - - - - Debugging/Testing options: - - - - Disable safemode, override a real safe mode event (default: 0) - - - - Discover own IP address (default: 1 when listening and no -externalip) - - - - Do not load the wallet and disable wallet RPC calls - - - - Do you want to rebuild the block database now? - - - - Error initializing block database - - - - Error initializing wallet database environment %s! - - - - Error loading block database - - - - Error opening block database - - - - Error: Disk space is low! - - - - Error: Wallet locked, unable to create transaction! - - - - Error: system error: - - - - Failed to listen on any port. Use -listen=0 if you want this. - - - - Failed to read block info - - - - Failed to read block - - - - Failed to sync block index - - - - Failed to write block index - - - - Failed to write block info - - - - Failed to write block - - - - Failed to write file info - - - - Failed to write to coin database - - - - Failed to write transaction index - - - - Failed to write undo data - - - - Fee per kB to add to transactions you send - - + RecentRequestsTableModel - Fees smaller than this are considered zero fee (for relaying) (default: - + Date + taareek - Find peers using DNS lookup (default: 1 unless -connect) - + Label + लेबल - Force safe mode (default: 0) - + Amount + राशि - Generate coins (default: 0) - + (no label) + (कोई लेबल नही !) + + + SendCoinsDialog - How many blocks to check at startup (default: 288, 0 = all) - + Send Coins + सिक्के भेजें| - If <category> is not supplied, output all debugging information. - + Amount: + राशि : - Importing... - + Send to multiple recipients at once + एक साथ कई प्राप्तकर्ताओं को भेजें - Incorrect or no genesis block found. Wrong datadir for network? - + Balance: + बाकी रकम : - Invalid -onion address: '%s' - + Confirm the send action + भेजने की पुष्टि करें - Not enough file descriptors available. - + Confirm send coins + सिक्के भेजने की पुष्टि करें - Prepend debug output with timestamp (default: 1) - + Copy amount + कॉपी राशि - RPC client options: - + The amount to pay must be larger than 0. + भेजा गया अमाउंट शुन्य से अधिक होना चाहिए| - Rebuild block chain index from current blk000??.dat files - + (no label) + (कोई लेबल नही !) + + + SendCoinsEntry - Select SOCKS version for -proxy (4 or 5, default: 5) - + A&mount: + अमाउंट: - Set database cache size in megabytes (%d to %d, default: %d) - + Pay &To: + प्राप्तकर्ता: - Set maximum block size in bytes (default: %d) - + Enter a label for this address to add it to your address book + आपकी एड्रेस बुक में इस एड्रेस के लिए एक लेबल लिखें - Set the number of threads to service RPC calls (default: 4) - + &Label: + लेबल: - Specify wallet file (within data directory) - + Alt+A + Alt-A - Spend unconfirmed change when sending transactions (default: 1) - + Paste address from clipboard + Clipboard से एड्रेस paste करें - This is intended for regression testing tools and app development. - + Alt+P + Alt-P + + + ShutdownWindow + + + SignVerifyMessageDialog - Usage (deprecated, use bitcoin-cli): - + Alt+A + Alt-A - Verifying blocks... - ब्लॉक्स जाँचे जा रहा है... + Paste address from clipboard + Clipboard से एड्रेस paste करें - Verifying wallet... - वॉलेट जाँचा जा रहा है... + Alt+P + Alt-P - Wait for RPC server to start - + Signature + हस्ताक्षर + + + SplashScreen - Wallet %s resides outside data directory %s - + [testnet] + [टेस्टनेट] + + + TrafficGraphWidget + + + TransactionDesc - Wallet options: - + Open until %1 + खुला है जबतक %1 - Warning: Deprecated argument -debugnet ignored, use -debug=net - + %1/unconfirmed + %1/अपुष्ट - You need to rebuild the database using -reindex to change -txindex - + %1 confirmations + %1 पुष्टियाँ - Imports blocks from external blk000??.dat file - + Date + taareek - Cannot obtain a lock on data directory %s. Bitcoin Core is probably already running. - + Transaction ID + ID - Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message) - + Amount + राशि - Output debugging information (default: 0, supplying <category> is optional) - + true + सही - Set maximum size of high-priority/low-fee transactions in bytes (default: %d) - + false + ग़लत - Information - जानकारी + , has not been successfully broadcast yet + , अभी तक सफलतापूर्वक प्रसारित नहीं किया गया है - Invalid amount for -minrelaytxfee=<amount>: '%s' - + unknown + अज्ञात + + + TransactionDescDialog - Invalid amount for -mintxfee=<amount>: '%s' - + Transaction details + लेन-देन का विवरण - Limit size of signature cache to <n> entries (default: 50000) - + This pane shows a detailed description of the transaction + ये खिड़की आपको लेन-देन का विस्तृत विवरण देगी ! + + + TransactionTableModel - Log transaction priority and fee per kB when mining blocks (default: 0) - + Date + taareek - Maintain a full transaction index (default: 0) - + Type + टाइप - Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000) - + Address + पता - Maximum per-connection send buffer, <n>*1000 bytes (default: 1000) - + Open until %1 + खुला है जबतक %1 - Only accept block chain matching built-in checkpoints (default: 1) - + Confirmed (%1 confirmations) + पक्के ( %1 पक्का करना) - Only connect to nodes in network <net> (IPv4, IPv6 or Tor) - + This block was not received by any other nodes and will probably not be accepted! + यह ब्लॉक किसी भी और नोड को मिला नही है ! शायद यह ब्लॉक कोई भी नोड स्वीकारे गा नही ! - Print block on startup, if found in block index - + Generated but not accepted + जेनरेट किया गया किंतु स्वीकारा नही गया ! - Print block tree on startup (default: 0) - + Received with + स्वीकारा गया - RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions) - + Received from + स्वीकार्य ओर से - RPC server options: - + Sent to + भेजा गया - Randomly drop 1 of every <n> network messages - + Payment to yourself + भेजा खुद को भुगतान - Randomly fuzz 1 of every <n> network messages - + Mined + माइंड - Run a thread to flush wallet periodically (default: 1) - + (n/a) + (लागू नहीं) - SSL options: (see the Bitcoin Wiki for SSL setup instructions) - + Transaction status. Hover over this field to show number of confirmations. + ट्रांसेक्शन स्तिथि| पुष्टियों की संख्या जानने के लिए इस जगह पर माउस लायें| - Send command to Bitcoin Core - + Date and time that the transaction was received. + तारीख तथा समय जब ये ट्रांसेक्शन प्राप्त हुई थी| - Send trace/debug info to console instead of debug.log file - + Type of transaction. + ट्रांसेक्शन का प्रकार| - Set minimum block size in bytes (default: 0) - + Destination address of transaction. + ट्रांसेक्शन की मंजिल का पता| - Sets the DB_PRIVATE flag in the wallet db environment (default: 1) - + Amount removed from or added to balance. + अमाउंट बैलेंस से निकला या जमा किया गया | + + + TransactionView - Show all debugging options (usage: --help -help-debug) - + All + सभी - Show benchmark information (default: 0) - + Today + आज - Shrink debug.log file on client startup (default: 1 when no -debug) - + This week + इस हफ्ते - Signing transaction failed - + This month + इस महीने - Specify connection timeout in milliseconds (default: 5000) - + Last month + पिछले महीने - Start Bitcoin Core Daemon - + This year + इस साल - System error: - + Range... + विस्तार... - Transaction amount too small - + Received with + स्वीकार करना - Transaction amounts must be positive - + Sent to + भेजा गया - Transaction too large - + To yourself + अपनेआप को - Use UPnP to map the listening port (default: 0) - + Mined + माइंड - Use UPnP to map the listening port (default: 1 when listening) - + Other + अन्य - Username for JSON-RPC connections - + Enter address or label to search + ढूँदने के लिए कृपा करके पता या लेबल टाइप करे ! - Warning - चेतावनी + Min amount + लघुत्तम राशि - Warning: This version is obsolete, upgrade required! - + Copy address + पता कॉपी करे - Zapping all transactions from wallet... - + Copy label + लेबल कॉपी करे - on startup - + Copy amount + कॉपी राशि - version - संस्करण + Edit label + एडिट लेबल - wallet.dat corrupt, salvage failed - + Comma separated file (*.csv) + Comma separated file (*.csv) - Password for JSON-RPC connections - + Confirmed + पक्का - Allow JSON-RPC connections from specified IP address - + Date + taareek - Send commands to node running on <ip> (default: 127.0.0.1) - + Type + टाइप - Execute command when the best block changes (%s in cmd is replaced by block hash) - + Label + लेबल - Upgrade wallet to latest format - + Address + पता - Set key pool size to <n> (default: 100) - + ID + ID - Rescan the block chain for missing wallet transactions - + Range: + विस्तार: - Use OpenSSL (https) for JSON-RPC connections - + to + तक + + + UnitDisplayStatusBarControl + + + WalletFrame + + + WalletModel - Server certificate file (default: server.cert) - + Send Coins + सिक्के भेजें| + + + WalletView - Server private key (default: server.pem) - + Backup Wallet + बैकप वॉलेट - This help message - + Wallet Data (*.dat) + वॉलेट डेटा (*.dat) - Unable to bind to %s on this computer (bind returned error %d, %s) - + Backup Failed + बैकप असफल - Allow DNS lookups for -addnode, -seednode and -connect - + Backup Successful + बैकप सफल + + + bitcoin-core - Loading addresses... - पता पुस्तक आ रही है... + Options: + विकल्प: - Error loading wallet.dat: Wallet corrupted - + Specify configuration file (default: bitcoin.conf) + configuraion की फाइल का विवरण दें (default: bitcoin.conf) - Error loading wallet.dat: Wallet requires newer version of Bitcoin - + Specify pid file (default: bitcoind.pid) + pid फाइल का विवरण दें (default: bitcoin.pid) - Wallet needed to be rewritten: restart Bitcoin to complete - + Specify data directory + डेटा डायरेक्टरी बताएं - Error loading wallet.dat - + Run in the background as a daemon and accept commands + बैकग्राउंड में डेमॉन बन कर रन करे तथा कमांड्स स्वीकार करें - Invalid -proxy address: '%s' - + Use the test network + टेस्ट नेटवर्क का इस्तेमाल करे - Unknown network specified in -onlynet: '%s' - + Verifying blocks... + ब्लॉक्स जाँचे जा रहा है... - Unknown -socks proxy version requested: %i - + Verifying wallet... + वॉलेट जाँचा जा रहा है... - Cannot resolve -bind address: '%s' - + Information + जानकारी - Cannot resolve -externalip address: '%s' - + Warning + चेतावनी - Invalid amount for -paytxfee=<amount>: '%s' - + Loading addresses... + पता पुस्तक आ रही है... Invalid amount राशि ग़लत है - - Insufficient funds - - Loading block index... ब्लॉक इंडेक्स आ रहा है... - - Add a node to connect to and attempt to keep the connection open - - Loading wallet... वॉलेट आ रहा है... - - Cannot downgrade wallet - - - - Cannot write default address - - Rescanning... रि-स्केनी-इंग... @@ -3355,19 +920,9 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Done loading लोड हो गया| - - To use the %s option - - Error भूल - - You must set rpcpassword=<password> in the configuration file: -%s -If the file does not exist, create it with owner-readable-only file permissions. - - \ No newline at end of file -- cgit v1.2.3