From d001476cbc7e9511e149e5ab2e30b258e65ace89 Mon Sep 17 00:00:00 2001 From: Philip Kaufmann Date: Thu, 24 Jan 2013 09:36:40 +0100 Subject: full translations update - fetch current translations from Transifex - update bitcoinstrings.cpp and bitcoin_en.ts --- src/qt/locale/bitcoin_fr_CA.ts | 589 ++++++++++++++++++++++++----------------- 1 file changed, 350 insertions(+), 239 deletions(-) (limited to 'src/qt/locale/bitcoin_fr_CA.ts') diff --git a/src/qt/locale/bitcoin_fr_CA.ts b/src/qt/locale/bitcoin_fr_CA.ts index 16861ed570..6fde4d32fb 100644 --- a/src/qt/locale/bitcoin_fr_CA.ts +++ b/src/qt/locale/bitcoin_fr_CA.ts @@ -63,7 +63,7 @@ Ce produit comprend des logiciels développés par le projet OpenSSL pour être These are your Bitcoin addresses for receiving payments. You may want to give a different one to each sender so you can keep track of who is paying you. - + Ceux-ci sont vos adresses Bitcoin qui vous permettent de recevoir des paiements. Vous pouvez en donner une différente à chaque expédieur afin de savoir qui vous payent. @@ -298,17 +298,17 @@ Ce produit comprend des logiciels développés par le projet OpenSSL pour être BitcoinGUI - + Sign &message... - + Synchronizing with network... - + &Overview @@ -318,7 +318,7 @@ Ce produit comprend des logiciels développés par le projet OpenSSL pour être - + &Transactions @@ -328,7 +328,7 @@ Ce produit comprend des logiciels développés par le projet OpenSSL pour être - + &Address Book @@ -338,7 +338,7 @@ Ce produit comprend des logiciels développés par le projet OpenSSL pour être - + &Receive coins @@ -348,12 +348,12 @@ Ce produit comprend des logiciels développés par le projet OpenSSL pour être - + &Send coins - + E&xit @@ -383,7 +383,7 @@ Ce produit comprend des logiciels développés par le projet OpenSSL pour être - + &Encrypt Wallet... @@ -397,43 +397,43 @@ Ce produit comprend des logiciels développés par le projet OpenSSL pour être &Change Passphrase... - - - ~%n block(s) remaining - + + + Importing blocks from disk... + - - Downloaded %1 of %2 blocks of transaction history (%3% done). + + Reindexing blocks on disk... + + + ~%n block(s) remaining + + - + &Export... - + Send coins to a Bitcoin address - + Modify configuration options for Bitcoin - + Export the data in the current tab to a file - - Encrypt or decrypt wallet - - - - + Backup wallet to another location @@ -443,7 +443,7 @@ Ce produit comprend des logiciels développés par le projet OpenSSL pour être - + &Debug window @@ -453,24 +453,25 @@ Ce produit comprend des logiciels développés par le projet OpenSSL pour être - + &Verify message... - + + Bitcoin - + Wallet - + &About Bitcoin - + &A propos de Bitcoin @@ -478,7 +479,27 @@ Ce produit comprend des logiciels développés par le projet OpenSSL pour être - + + Show or hide the main Window + + + + + Encrypt the private keys that belong to your wallet + + + + + Sign messages with your Bitcoin addresses to prove you own them + + + + + Verify messages to ensure they were signed with specified Bitcoin addresses + + + + &File @@ -504,28 +525,62 @@ Ce produit comprend des logiciels développés par le projet OpenSSL pour être - + [testnet] - - + Bitcoin client - + %n active connection(s) to Bitcoin network - - Downloaded %1 blocks of transaction history. + + Processed %1 of %2 blocks of transaction history (%3% done). + + + + + Processed %1 blocks of transaction history. + + + + + Error + + + + + Warning + + + + + Information + + + + + This transaction is over the size limit. You can still send it for a fee of %1, which goes to the nodes that process your transaction and helps to support the network. Do you want to pay the fee? + + + + + Backup Successful + + + + + The wallet data was successfully saved to the new location. - + %n second(s) ago @@ -560,22 +615,17 @@ Ce produit comprend des logiciels développés par le projet OpenSSL pour être - - This transaction is over the size limit. You can still send it for a fee of %1, which goes to the nodes that process your transaction and helps to support the network. Do you want to pay the fee? - - - - + Confirm transaction fee - + Sent transaction - + Incoming transaction @@ -589,19 +639,19 @@ Address: %4 - - + + URI handling - - + + URI can not be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters. - + Wallet is <b>encrypted</b> and currently <b>unlocked</b> @@ -639,7 +689,7 @@ Address: %4 ClientModel - + Network Alert @@ -789,17 +839,17 @@ Address: %4 - - Detach block and address databases at shutdown. This means they can be moved to another data directory, but it slows down shutdown. The wallet is always detached. + + Reset all client options to default. - &Detach databases at shutdown + &Reset Options - + &Network @@ -934,7 +984,22 @@ Address: %4 - + + Confirm options reset + + + + + Some settings may require a client restart to take effect. + + + + + Do you want to proceed? + + + + Warning @@ -959,7 +1024,7 @@ Address: %4 - + The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet. @@ -1015,7 +1080,7 @@ Address: %4 - + out of sync @@ -1096,7 +1161,7 @@ Address: %4 - + N/A @@ -1211,7 +1276,7 @@ Address: %4 - + Welcome to the Bitcoin RPC console. @@ -1327,7 +1392,7 @@ Address: %4 - Error: Transaction creation failed. + Error: Transaction creation failed! @@ -1354,23 +1419,23 @@ Address: %4 - - - Enter a label for this address to add it to your address book + + The address to send the payment to (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - - &Label: + + + Enter a label for this address to add it to your address book - - The address to send the payment to (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) + + &Label: - + Choose address from address book @@ -1409,12 +1474,11 @@ Address: %4 - &Sign Message - + You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. @@ -1425,18 +1489,18 @@ Address: %4 - + Choose an address from the address book - - + + Alt+A - + Paste address from clipboard @@ -1451,7 +1515,12 @@ Address: %4 - + + Signature + + + + Copy the current signature to the system clipboard @@ -1461,7 +1530,12 @@ Address: %4 - + + Sign &Message + + + + Reset all sign message fields @@ -1473,12 +1547,11 @@ Address: %4 - &Verify Message - + Enter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. @@ -1493,7 +1566,12 @@ Address: %4 - + + Verify &Message + + + + Reset all verify message fields @@ -1587,13 +1665,8 @@ Address: %4 Open until %1 - - - Open for %n block(s) - - - + %1/offline @@ -1724,7 +1797,7 @@ Address: %4 - + Inputs @@ -1744,12 +1817,17 @@ Address: %4 - + , has not been successfully broadcast yet + + + Open for %n more block(s) + + - + unknown @@ -1791,7 +1869,7 @@ Address: %4 - Open for %n block(s) + Open for %n more block(s) @@ -2049,18 +2127,10 @@ Address: %4 - - WalletModel - - - Sending... - - - bitcoin-core - + Bitcoin version @@ -2070,12 +2140,12 @@ Address: %4 - + Send command to -server or bitcoind - + List commands @@ -2085,12 +2155,12 @@ Address: %4 - + Options: - + Specify configuration file (default: bitcoin.conf) @@ -2105,25 +2175,20 @@ Address: %4 - + Don't generate coins - + Specify data directory - + Set database cache size in megabytes (default: 25) - - - Set database disk log size in megabytes (default: 100) - - Listen for connections on <port> (default: 8333 or testnet: 18333) @@ -2135,85 +2200,113 @@ Address: %4 - + Connect to a node to retrieve peer addresses, and disconnect - + Specify your own public address - - Bind to given address. Use [host]:port notation for IPv6 + + Threshold for disconnecting misbehaving peers (default: 100) - - Threshold for disconnecting misbehaving peers (default: 100) + + Number of seconds to keep misbehaving peers from reconnecting (default: 86400) - - Number of seconds to keep misbehaving peers from reconnecting (default: 86400) + + An error occurred while setting up the RPC port %u for listening on IPv4: %s - - An error occurred while setting up the RPC port %i for listening on IPv6, falling back to IPv4: %s + + Listen for JSON-RPC connections on <port> (default: 8332 or testnet: 18332) - - An error occurred while setting up the RPC port %u for listening on IPv4: %s + + Accept command line and JSON-RPC commands - - Detach block and address databases. Increases shutdown time (default: 0) + + Run in the background as a daemon and accept commands - - Listen for JSON-RPC connections on <port> (default: 8332 or testnet: 18332) + + Use the test network - - Accept command line and JSON-RPC commands + + Accept connections from outside (default: 1 if no -proxy or -connect) - - Importing blockchain data file. + + %s, you must set a rpcpassword in the configuration file: + %s +It is recommended you use the following random password: +rpcuser=bitcoinrpc +rpcpassword=%s +(you do not need to remember this password) +The username and password MUST NOT be the same. +If the file does not exist, create it with owner-readable-only file permissions. + - - Importing bootstrap blockchain data file. + + An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %s - - Run in the background as a daemon and accept commands + + Bind to given address and always listen on it. Use [host]:port notation for IPv6 - - Use the test network + + Cannot obtain a lock on data directory %s. Bitcoin is probably already running. - - Accept connections from outside (default: 1 if no -proxy or -connect) + + Corrupted block database detected. Please restart the client with -reindex. - + + Error initializing database environment %s! To recover, BACKUP THAT DIRECTORY, then remove everything from it except for wallet.dat. + + + + + Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. + + + + + Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds! + + + + Set maximum size of high-priority/low-fee transactions in bytes (default: 27000) + + + This is a pre-release test build - use at your own risk - do not use for mining or merchant applications + + Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction. @@ -2230,7 +2323,22 @@ Address: %4 - + + Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect. + + + + + Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup. + + + + + Attempt to recover private keys from a corrupt wallet.dat + + + + Block creation options: @@ -2245,7 +2353,27 @@ Address: %4 - + + Error loading block database + + + + + Error: Disk space is low! + + + + + Error: Transaction creation failed! + + + + + Error: Wallet locked, unable to create transaction! + + + + Failed to listen on any port. Use -listen=0 if you want this. @@ -2255,7 +2383,27 @@ Address: %4 - + + How thorough the block verification is (0-4, default: 3) + + + + + Importing blocks from block database... + + + + + Imports blocks from external blk000??.dat file + + + + + Information + + + + Invalid -tor address: '%s' @@ -2269,6 +2417,11 @@ Address: %4 Maximum per-connection send buffer, <n>*1000 bytes (default: 1000) + + + Only accept block chain matching built-in checkpoints (default: 1) + + Only connect to nodes in network <net> (IPv4, IPv6 or Tor) @@ -2289,6 +2442,11 @@ Address: %4 Prepend debug output with timestamp + + + Rebuild blockchain index from current blk000??.dat files + + SSL options: (see the Bitcoin Wiki for SSL setup instructions) @@ -2310,7 +2468,7 @@ Address: %4 - + Set maximum block size in bytes (default: 250000) @@ -2350,8 +2508,8 @@ Address: %4 - - Warning: Disk space is low! + + Warning @@ -2360,27 +2518,32 @@ Address: %4 - + + wallet.dat corrupt, salvage failed + + + + Password for JSON-RPC connections - + Allow JSON-RPC connections from specified IP address - + Send commands to node running on <ip> (default: 127.0.0.1) - + Execute command when the best block changes (%s in cmd is replaced by block hash) - + Upgrade wallet to latest format @@ -2390,32 +2553,22 @@ Address: %4 - + Rescan the block chain for missing wallet transactions - + How many blocks to check at startup (default: 2500, 0 = all) - - How thorough the block verification is (0-6, default: 1) - - - - - Imports blocks from external blk000?.dat file - - - - + Use OpenSSL (https) for JSON-RPC connections - + Server certificate file (default: server.cert) @@ -2425,37 +2578,27 @@ Address: %4 - + Acceptable ciphers (default: TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH) - + This help message - - Cannot obtain a lock on data directory %s. Bitcoin is probably already running. - - - - - Bitcoin - - - - + Unable to bind to %s on this computer (bind returned error %d, %s) - + Connect through socks proxy - + Allow DNS lookups for -addnode, -seednode and -connect @@ -2465,32 +2608,37 @@ Address: %4 - - Error loading blkindex.dat + + Error loading wallet.dat: Wallet corrupted - - Error loading wallet.dat: Wallet corrupted + + Error loading wallet.dat: Wallet requires newer version of Bitcoin + + + + + Verifying block database integrity... - Error loading wallet.dat: Wallet requires newer version of Bitcoin + Verifying wallet integrity... - + Wallet needed to be rewritten: restart Bitcoin to complete - + Error loading wallet.dat - + Invalid -proxy address: '%s' @@ -2505,7 +2653,7 @@ Address: %4 - + Cannot resolve -bind address: '%s' @@ -2515,7 +2663,7 @@ Address: %4 - + Invalid amount for -paytxfee=<amount>: '%s' @@ -2525,32 +2673,7 @@ Address: %4 - - Error: Wallet locked, unable to create transaction - - - - - Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds - - - - - Error: Transaction creation failed - - - - - Sending... - - - - - Error: The transaction was rejected. This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. - - - - + Invalid amount @@ -2570,12 +2693,12 @@ Address: %4 - + Unable to bind to %s on this computer. Bitcoin is probably already running. - + Find peers using internet relay chat (default: 0) @@ -2590,7 +2713,7 @@ Address: %4 - + Cannot downgrade wallet @@ -2605,39 +2728,27 @@ Address: %4 - + Rescanning... - + Done loading - + To use the %s option - - %s, you must set a rpcpassword in the configuration file: - %s -It is recommended you use the following random password: -rpcuser=bitcoinrpc -rpcpassword=%s -(you do not need to remember this password) -If the file does not exist, create it with owner-readable-only file permissions. - - - - - + Error - + You must set rpcpassword=<password> in the configuration file: %s If the file does not exist, create it with owner-readable-only file permissions. -- cgit v1.2.3