From 6f5d33b3d2901799311d8596c394a45211ff978f Mon Sep 17 00:00:00 2001 From: "Wladimir J. van der Laan" Date: Thu, 28 Aug 2014 13:10:32 +0200 Subject: Update translations after update script improvements --- src/qt/locale/bitcoin_es_DO.ts | 782 ++++------------------------------------- 1 file changed, 72 insertions(+), 710 deletions(-) (limited to 'src/qt/locale/bitcoin_es_DO.ts') diff --git a/src/qt/locale/bitcoin_es_DO.ts b/src/qt/locale/bitcoin_es_DO.ts index 6944c3157f..a9cfe90895 100644 --- a/src/qt/locale/bitcoin_es_DO.ts +++ b/src/qt/locale/bitcoin_es_DO.ts @@ -1,44 +1,4 @@ - - - AboutDialog - - About Bitcoin Core - Acerca del Núcleo de Bitcoin - - - <b>Bitcoin Core</b> version - Versión del <b>Núcleo de Bitcoin<b> - - - -This is experimental software. - -Distributed under the MIT/X11 software license, see the accompanying file COPYING or http://www.opensource.org/licenses/mit-license.php. - -This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/) and cryptographic software written by Eric Young (eay@cryptsoft.com) and UPnP software written by Thomas Bernard. - -Este es un software experimental. - -Distribuido bajo la licencia MIT/X11, vea el archivo adjunto -COPYING o http://www.opensource.org/licenses/mit-license.php. - -Este producto incluye software desarrollado por OpenSSL Project para su uso en -el OpenSSL Toolkit (http://www.openssl.org/) y software criptográfico escrito por -Eric Young (eay@cryptsoft.com) y el software UPnP escrito por Thomas Bernard. - - - Copyright - Copyright - - - The Bitcoin Core developers - Los desarrolladores del Núcleo de Bitcoin - - - (%1-bit) - - - + AddressBookPage @@ -133,11 +93,7 @@ Eric Young (eay@cryptsoft.com) y el software UPnP escrito por Thomas Bernard.Exporting Failed Error exportando - - There was an error trying to save the address list to %1. - - - + AddressTableModel @@ -171,10 +127,6 @@ Eric Young (eay@cryptsoft.com) y el software UPnP escrito por Thomas Bernard.Repeat new passphrase Repita la nueva contraseña - - Enter the new passphrase to the wallet.<br/>Please use a passphrase of <b>10 or more random characters</b>, or <b>eight or more words</b>. - Introduzca la nueva contraseña de la cartera.<br/>Por favor elija una con <b>10 o más caracteres aleatorios</b>, u <b>ocho o más palabras</b>. - Encrypt wallet Cifrar la cartera @@ -209,7 +161,7 @@ Eric Young (eay@cryptsoft.com) y el software UPnP escrito por Thomas Bernard. Warning: If you encrypt your wallet and lose your passphrase, you will <b>LOSE ALL OF YOUR BITCOINS</b>! - Atencion: ¡Si cifra su monedero y pierde la contraseña perderá <b>TODOS SUS BITCOINS</b>!" + Atencion: ¡Si cifra su monedero y pierde la contraseña perderá <b>TODOS SUS BITCOINS</b>!" Are you sure you wish to encrypt your wallet? @@ -298,10 +250,6 @@ Eric Young (eay@cryptsoft.com) y el software UPnP escrito por Thomas Bernard.Quit application Salir de la aplicación - - Show information about Bitcoin - Mostrar información acerca de Bitcoin - About &Qt Acerca de &Qt @@ -436,7 +384,7 @@ Eric Young (eay@cryptsoft.com) y el software UPnP escrito por Thomas Bernard. Request payments (generates QR codes and bitcoin: URIs) - Solicitar pagos (genera codigo QR y URL's de Bitcoin) + Solicitar pagos (genera codigo QR y URL's de Bitcoin) &About Bitcoin Core @@ -458,50 +406,14 @@ Eric Young (eay@cryptsoft.com) y el software UPnP escrito por Thomas Bernard.&Command-line options &Opciones de linea de comando - - Show the Bitcoin Core help message to get a list with possible Bitcoin command-line options - - - - Bitcoin client - Cliente Bitcoin - - - %n active connection(s) to Bitcoin network - %n conexión activa hacia la red Bitcoin%n conexiones activas hacia la red Bitcoin - No block source available... Ninguna fuente de bloques disponible ... - - Processed %1 of %2 (estimated) blocks of transaction history. - Se han procesado %1 de %2 bloques (estimados) del historial de transacciones. - Processed %1 blocks of transaction history. Procesados %1 bloques del historial de transacciones. - - %n hour(s) - %n hora%n horas - - - %n day(s) - %n día%n días - - - %n week(s) - %n semana%n semanas - - - %1 and %2 - - - - %n year(s) - - %1 behind %1 atrás @@ -562,10 +474,6 @@ Dirección: %4 Wallet is <b>encrypted</b> and currently <b>locked</b> El monedero está <b>cifrado</b> y actualmente <b>bloqueado</b> - - A fatal error occurred. Bitcoin can no longer continue safely and will quit. - Ha ocurrido un error crítico. Bitcoin ya no puede continuar con seguridad y se cerrará. - ClientModel @@ -600,10 +508,6 @@ Dirección: %4 Fee: Tasa: - - Low Output: - Envío pequeño: - After Fee: Después de tasas: @@ -692,13 +596,9 @@ Dirección: %4 Copy priority Copiar prioridad - - Copy low output - Copiar envío pequeño - Copy change - Copiar cambio + Copiar Cambio highest @@ -744,10 +644,6 @@ Dirección: %4 none ninguno - - Dust - Basura - yes si @@ -773,25 +669,13 @@ Dirección: %4 Las transacciones con alta prioridad son más propensas a ser incluidas dentro de un bloque. - This label turns red, if the priority is smaller than "medium". - Esta etiqueta se convierte en rojo, si la prioridad es menor que "medio". + This label turns red, if the priority is smaller than "medium". + Esta etiqueta se convierte en rojo, si la prioridad es menor que "medio". This label turns red, if any recipient receives an amount smaller than %1. Esta etiqueta se torna roja si cualquier destinatario recibe una cantidad menor a %1. - - This means a fee of at least %1 is required. - Esto significa que se necesita una tarifa de al menos %1. - - - Amounts below 0.546 times the minimum relay fee are shown as dust. - Cantidades por debajo de 0.546 veces la tasa serán mostradas como basura - - - This label turns red, if the change is smaller than %1. - Esta etiqueta se vuelve roja si la cantidad de monedas es menor a %1 - (no label) (sin etiqueta) @@ -844,12 +728,12 @@ Dirección: %4 Editar dirección de envío - The entered address "%1" is already in the address book. - La dirección introducida "%1" ya está presente en la libreta de direcciones. + The entered address "%1" is already in the address book. + La dirección introducida "%1" ya está presente en la libreta de direcciones. - The entered address "%1" is not a valid Bitcoin address. - La dirección introducida "%1" no es una dirección Bitcoin válida. + The entered address "%1" is not a valid Bitcoin address. + La dirección introducida "%1" no es una dirección Bitcoin válida. Could not unlock wallet. @@ -885,10 +769,6 @@ Dirección: %4 HelpMessageDialog - - Bitcoin Core - Command-line options - - Bitcoin Core Núcleo de Bitcoin @@ -897,6 +777,14 @@ Dirección: %4 version versión + + About Bitcoin Core + Acerca del Núcleo de Bitcoin + + + Command-line options + Opciones de la línea de órdenes + Usage: Uso: @@ -910,17 +798,13 @@ Dirección: %4 Opciones GUI - Set language, for example "de_DE" (default: system locale) - Establecer el idioma, por ejemplo, "es_ES" (predeterminado: configuración regional del sistema) + Set language, for example "de_DE" (default: system locale) + Establecer el idioma, por ejemplo, "es_ES" (predeterminado: configuración regional del sistema) Start minimized Arrancar minimizado - - Set SSL root certificates for payment request (default: -system-) - - Show splash screen on startup (default: 1) Mostrar pantalla de bienvenida en el inicio (predeterminado: 1) @@ -957,12 +841,8 @@ Dirección: %4 Utilice un directorio de datos personalizado: - Bitcoin - Bitcoin - - - Error: Specified data directory "%1" can not be created. - Error: No puede crearse el directorio de datos especificado "%1". + Bitcoin Core + Núcleo de Bitcoin Error @@ -1026,42 +906,18 @@ Dirección: %4 &Start Bitcoin on system login &Iniciar Bitcoin al iniciar el sistema - - Size of &database cache - - MB MB - - Number of script &verification threads - - Connect to the Bitcoin network through a SOCKS proxy. Conéctese a la red Bitcoin través de un proxy SOCKS. - - &Connect through SOCKS proxy (default proxy): - - IP address of the proxy (e.g. IPv4: 127.0.0.1 / IPv6: ::1) Dirección IP del proxy (ej. IPv4: 127.0.0.1 / IPv6: ::1) - - Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |. - - - - Third party transaction URLs - - - - Active command-line options that override above options: - - Reset all client options to default. Restablecer todas las opciones del cliente a las predeterminadas. @@ -1074,30 +930,10 @@ Dirección: %4 &Network &Red - - (0 = auto, <0 = leave that many cores free) - - - - W&allet - - Expert Experto - - Enable coin &control features - - - - If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed. - - - - &Spend unconfirmed change - - Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled. Abrir automáticamente el puerto del cliente Bitcoin en el router. Esta opción solo funciona si el router admite UPnP y está activado. @@ -1118,14 +954,6 @@ Dirección: %4 Port of the proxy (e.g. 9050) Puerto del servidor proxy (ej. 9050) - - SOCKS &Version: - &Versión SOCKS: - - - SOCKS version of the proxy (e.g. 5) - Versión del proxy SOCKS (ej. 5) - &Window &Ventana @@ -1166,14 +994,6 @@ Dirección: %4 Choose the default subdivision unit to show in the interface and when sending coins. Elegir la subdivisión predeterminada para mostrar cantidades en la interfaz y cuando se envían monedas. - - Whether to show Bitcoin addresses in the transaction list or not. - Mostrar o no las direcciones Bitcoin en la lista de transacciones. - - - &Display addresses in transaction list - &Mostrar las direcciones en la lista de transacciones - Whether to show coin control features or not. Mostrar o no características de control de moneda @@ -1192,7 +1012,7 @@ Dirección: %4 none - Ninguna + ninguno Confirm options reset @@ -1202,10 +1022,6 @@ Dirección: %4 Client restart required to activate changes. Reinicio del cliente para activar cambios. - - Client will be shutdown, do you want to proceed? - - This change would require a client restart. Este cambio requiere reinicio por parte del cliente. @@ -1229,18 +1045,10 @@ Dirección: %4 Wallet Monedero - - Available: - - Your current spendable balance Su balance actual gastable - - Pending: - - Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance Total de transacciones que deben ser confirmadas, y que no cuentan con el balance gastable necesario @@ -1277,8 +1085,8 @@ Dirección: %4 Gestión de URI - URI can not be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters. - ¡No se puede interpretar la URI! Esto puede deberse a una dirección Bitcoin inválida o a parámetros de URI mal formados. + Invalid payment address %1 + Dirección de pago no válida %1 Requested payment amount of %1 is too small (considered dust). @@ -1292,26 +1100,6 @@ Dirección: %4 Cannot start bitcoin: click-to-pay handler No se pudo iniciar bitcoin: manejador de pago-al-clic - - Net manager warning - - - - Your active proxy doesn't support SOCKS5, which is required for payment requests via proxy. - - - - Payment request fetch URL is invalid: %1 - - - - Payment request file handling - - - - Payment request file can not be read or processed! This can be caused by an invalid payment request file. - - Unverified payment requests to custom payment scripts are unsupported. No están soportadas las peticiones inseguras a scripts de pago personalizados @@ -1324,10 +1112,6 @@ Dirección: %4 Error communicating with %1: %2 Error en la comunicación con %1: %2 - - Payment request can not be parsed or processed! - - Bad response from server %1 Respuesta errónea del servidor %1 @@ -1341,33 +1125,28 @@ Dirección: %4 Error en petición de red + + PeerTableModel + QObject - Bitcoin - Bitcoin - - - Error: Specified data directory "%1" does not exist. - Error: El directorio de datos especificado "%1" no existe. - - - Error: Cannot parse configuration file: %1. Only use key=value syntax. - + Amount + Cantidad - Error: Invalid combination of -regtest and -testnet. - Error: Combinación no válida de -regtest y -testnet. + %1 h + %1 h - Bitcoin Core didn't yet exit safely... - + %1 m + %1 m - Enter a Bitcoin address (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - Introduzca una dirección Bitcoin (ej. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) + N/A + N/D - + QRImageWidget @@ -1403,7 +1182,7 @@ Dirección: %4 &Information - &Información + Información Debug window @@ -1441,10 +1220,6 @@ Dirección: %4 Current number of blocks Número actual de bloques - - Estimated total blocks - Bloques totales estimados - Last block time Hora del último bloque @@ -1521,19 +1296,7 @@ Dirección: %4 %1 GB %1 GB - - %1 m - %1 m - - - %1 h - %1 h - - - %1 h %2 m - %1 h %2 m - - + ReceiveCoinsDialog @@ -1556,34 +1319,14 @@ Dirección: %4 R&euse an existing receiving address (not recommended) R&eutilizar una dirección existente para recibir (no recomendado) - - An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network. - - - - An optional label to associate with the new receiving address. - - - - Use this form to request payments. All fields are <b>optional</b>. - - - - An optional amount to request. Leave this empty or zero to not request a specific amount. - - Clear all fields of the form. - Limpiar todos los campos del formulario. + Limpiar todos los campos del formulario Clear Limpiar - - Requested payments history - - &Request payment &Solicitar pago @@ -1608,10 +1351,6 @@ Dirección: %4 Copy label Copiar etiqueta - - Copy message - - Copy amount Copiar cantidad @@ -1698,11 +1437,7 @@ Dirección: %4 (no message) (Ningun mensaje) - - (no amount) - - - + SendCoinsDialog @@ -1745,10 +1480,6 @@ Dirección: %4 Fee: Tasa: - - Low Output: - Envío pequeño: - After Fee: Después de tasas: @@ -1807,7 +1538,7 @@ Dirección: %4 Copy amount - Copiar cuantía + Copiar cantidad Copy fee @@ -1825,10 +1556,6 @@ Dirección: %4 Copy priority Copiar prioridad - - Copy low output - Copiar envío pequeño - Copy change Copiar Cambio @@ -1889,14 +1616,6 @@ Dirección: %4 added as transaction fee añadido como comisión de transacción - - Payment request expired - Petición de pago expirada - - - Invalid payment address %1 - Dirección de pago no válida %1 - SendCoinsEntry @@ -1908,10 +1627,6 @@ Dirección: %4 Pay &To: &Pagar a: - - The address to send the payment to (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - La dirección a la que enviar el pago (p. ej. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - Enter a label for this address to add it to your address book Etiquete esta dirección para añadirla a la libreta @@ -1922,7 +1637,7 @@ Dirección: %4 Choose previously used address - Escoger direcciones previamente usadas + Escoger dirección previamente usada This is a normal payment. @@ -1944,10 +1659,6 @@ Dirección: %4 Remove this entry Eliminar esta transacción - - Message: - - This is a verified payment request. Esto es una petición de pago verificado. @@ -1956,10 +1667,6 @@ Dirección: %4 Enter a label for this address to add it to the list of used addresses Introduce una etiqueta para esta dirección para añadirla a la lista de direcciones utilizadas - - A message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network. - - This is an unverified payment request. Esto es una petición de pago no verificado. @@ -1975,15 +1682,7 @@ Dirección: %4 ShutdownWindow - - Bitcoin Core is shutting down... - - - - Do not shut down the computer until this window disappears. - - - + SignVerifyMessageDialog @@ -1998,10 +1697,6 @@ Dirección: %4 You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. Puede firmar mensajes con sus direcciones para demostrar que las posee. Tenga cuidado de no firmar cualquier cosa vaga, ya que los ataques de phishing pueden tratar de engañarle para suplantar su identidad. Firme solo declaraciones totalmente detalladas con las que usted esté de acuerdo. - - The address to sign the message with (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - La dirección con la que firmar el mensaje (ej. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - Choose previously used address Escoger dirección previamente usada @@ -2054,10 +1749,6 @@ Dirección: %4 Enter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Introduzca la dirección para la firma, el mensaje (asegurándose de copiar tal cual los saltos de línea, espacios, tabulaciones, etc.) y la firma a continuación para verificar el mensaje. Tenga cuidado de no asumir más información de lo que dice el propio mensaje firmado para evitar fraudes basados en ataques de tipo man-in-the-middle. - - The address the message was signed with (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - La dirección con la que se firmó el mensaje (ej. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - Verify the message to ensure it was signed with the specified Bitcoin address Verificar el mensaje para comprobar que fue firmado con la dirección Bitcoin indicada @@ -2071,12 +1762,8 @@ Dirección: %4 Limpiar todos los campos de la verificación de mensaje - Enter a Bitcoin address (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - Introduzca una dirección Bitcoin (ej. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - - - Click "Sign Message" to generate signature - Haga clic en "Firmar mensaje" para generar la firma + Click "Sign Message" to generate signature + Haga clic en "Firmar mensaje" para generar la firma The entered address is invalid. @@ -2155,10 +1842,6 @@ Dirección: %4 Open until %1 Abierto hasta %1 - - conflicted - - %1/offline %1/fuera de línea @@ -2175,10 +1858,6 @@ Dirección: %4 Status Estado - - , broadcast through %n node(s) - , transmitir a través de %n nodo, transmitir a través de %n nodos - Date Fecha @@ -2211,10 +1890,6 @@ Dirección: %4 Credit Crédito - - matures in %n more block(s) - disponible en %n bloque másdisponible en %n bloques más - not accepted no aceptada @@ -2241,15 +1916,15 @@ Dirección: %4 Transaction ID - Identificador de transacción + ID Merchant Vendedor - Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours. - Las monedas generadas deben madurar %1 bloques antes de que puedan ser gastadas. Una vez que generas este bloque, es propagado por la red para ser añadido a la cadena de bloques. Si falla el intento de meterse en la cadena, su estado cambiará a "no aceptado" y ya no se puede gastar. Esto puede ocurrir ocasionalmente si otro nodo genera un bloque a pocos segundos del tuyo. + Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours. + Las monedas generadas deben madurar %1 bloques antes de que puedan ser gastadas. Una vez que generas este bloque, es propagado por la red para ser añadido a la cadena de bloques. Si falla el intento de meterse en la cadena, su estado cambiará a "no aceptado" y ya no se puede gastar. Esto puede ocurrir ocasionalmente si otro nodo genera un bloque a pocos segundos del tuyo. Debug information @@ -2279,10 +1954,6 @@ Dirección: %4 , has not been successfully broadcast yet , todavía no se ha sido difundido satisfactoriamente - - Open for %n more block(s) - Abrir para %n bloque másAbrir para %n bloques más - unknown desconocido @@ -2313,18 +1984,6 @@ Dirección: %4 Address Dirección - - Amount - Cantidad - - - Immature (%1 confirmations, will be available after %2) - - - - Open for %n more block(s) - Abrir para %n bloque másAbrir para %n bloques más - Open until %1 Abierto hasta %1 @@ -2341,22 +2000,6 @@ Dirección: %4 Generated but not accepted Generado pero no aceptado - - Offline - - - - Unconfirmed - - - - Confirming (%1 of %2 recommended confirmations) - - - - Conflicted - - Received with Recibido con @@ -2470,7 +2113,7 @@ Dirección: %4 Copy amount - Copiar cuantía + Copiar cantidad Copy transaction ID @@ -2528,10 +2171,6 @@ Dirección: %4 Address Dirección - - Amount - Cantidad - ID ID @@ -2545,6 +2184,9 @@ Dirección: %4 para + + UnitDisplayStatusBarControl + WalletFrame @@ -2596,20 +2238,6 @@ Dirección: %4 bitcoin-core - - Usage: - Uso: - - - List commands - Muestra comandos - - - - Get help for a command - Recibir ayuda para un comando - - Options: Opciones: @@ -2653,10 +2281,6 @@ Dirección: %4 Number of seconds to keep misbehaving peers from reconnecting (default: 86400) Número de segundos en que se evita la reconexión de pares con mal comportamiento (predeterminado: 86400) - - An error occurred while setting up the RPC port %u for listening on IPv4: %s - Ha ocurrido un error al configurar el puerto RPC %u para escucha en IPv4: %s - Listen for JSON-RPC connections on <port> (default: 8332 or testnet: 18332) Escuchar conexiones JSON-RPC en <puerto> (predeterminado: 8332 o testnet:18332) @@ -2666,10 +2290,6 @@ Dirección: %4 Aceptar comandos consola y JSON-RPC - - Bitcoin Core RPC client version - - Run in the background as a daemon and accept commands Ejecutar en segundo plano como daemon y aceptar comandos @@ -2694,7 +2314,7 @@ rpcpassword=%s The username and password MUST NOT be the same. If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; -for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com +for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com %s, debe establecer un valor rpcpassword en el archivo de configuración: %s @@ -2705,37 +2325,17 @@ rpcpassword=%s El nombre de usuario y la contraseña DEBEN NO ser iguales. Si el archivo no existe, créelo con permisos de archivo de solo lectura. Se recomienda también establecer alertnotify para recibir notificaciones de problemas. -Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com +Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com Acceptable ciphers (default: TLSv1.2+HIGH:TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH) Cifradores aceptables (por defecto: TLSv1.2+HIGH:TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH) - - An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %s - Ha ocurrido un error al configurar el puerto RPC %u para escuchar mediante IPv6. Recurriendo a IPv4: %s - Bind to given address and always listen on it. Use [host]:port notation for IPv6 Vincular a la dirección dada y escuchar siempre en ella. Utilice la notación [host]:port para IPv6 - - Continuously rate-limit free transactions to <n>*1000 bytes per minute (default:15) - - - - Enter regression test mode, which uses a special chain in which blocks can be solved instantly. This is intended for regression testing tools and app development. - Iniciar modo de prueba de regresión, el cuál utiliza una cadena especial en la cual los bloques pueden ser resueltos instantáneamente. Se utiliza para herramientas de prueba de regresión y desarrollo de aplicaciones. - - - Enter regression test mode, which uses a special chain in which blocks can be solved instantly. - - - - Error: Listening for incoming connections failed (listen returned error %d) - - Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. ¡Error: se ha rechazado la transacción! Esto puede ocurrir si ya se han gastado algunas de las monedas del monedero, como ocurriría si hubiera hecho una copia de wallet.dat y se hubieran gastado monedas a partir de la copia, con lo que no se habrían marcado aquí como gastadas. @@ -2748,38 +2348,10 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Execute command when a wallet transaction changes (%s in cmd is replaced by TxID) Ejecutar comando cuando una transacción del monedero cambia (%s en cmd se remplazará por TxID) - - Fees smaller than this are considered zero fee (for transaction creation) (default: - - - - Flush database activity from memory pool to disk log every <n> megabytes (default: 100) - - - - How thorough the block verification of -checkblocks is (0-4, default: 3) - - - - In this mode -genproclimit controls how many blocks are generated immediately. - - - - Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d) - - - - Set the processor limit for when generation is on (-1 = unlimited, default: -1) - - This is a pre-release test build - use at your own risk - do not use for mining or merchant applications Esta es una versión de pre-prueba - utilícela bajo su propio riesgo. No la utilice para usos comerciales o de minería. - - Unable to bind to %s on this computer. Bitcoin Core is probably already running. - - Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: -proxy) Usar distintos proxys SOCKS5 para comunicarse vía Tor de forma anónima (Por defecto: -proxy) @@ -2788,10 +2360,6 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction. Aviso: ¡-paytxfee tiene un valor muy alto! Esta es la comisión que pagará si envía una transacción. - - Warning: Please check that your computer's date and time are correct! If your clock is wrong Bitcoin will not work properly. - Precaución: Por favor, ¡revise que la fecha y hora de su ordenador son correctas! Si su reloj está mal, Bitcoin no funcionará correctamente. - Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues. Atención: ¡Parece que la red no está totalmente de acuerdo! Algunos mineros están presentando inconvenientes. @@ -2808,14 +2376,6 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup. Aviso: ¡Recuperados datos de wallet.dat corrupto! El wallet.dat original se ha guardado como wallet.{timestamp}.bak en %s; si hubiera errores en su saldo o transacciones, deberá restaurar una copia de seguridad. - - (default: 1) - - - - (default: wallet.dat) - - <category> can be: <category> puede ser: @@ -2824,54 +2384,22 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Attempt to recover private keys from a corrupt wallet.dat Intento de recuperar claves privadas de un wallet.dat corrupto - - Bitcoin Core Daemon - Proceso Bitcoin-QT - Block creation options: Opciones de creación de bloques: - - Clear list of wallet transactions (diagnostic tool; implies -rescan) - - Connect only to the specified node(s) Conectar sólo a los nodos (o nodo) especificados - - Connect through SOCKS proxy - Conectar a través de un proxy SOCKS - - - Connect to JSON-RPC on <port> (default: 8332 or testnet: 18332) - Conectar a JSON-RPC en <puerto> (predeterminado: 8332 o testnet: 18332) - - - Connection options: - - Corrupted block database detected Corrupción de base de datos de bloques detectada. - - Debugging/Testing options: - - - - Disable safemode, override a real safe mode event (default: 0) - - Discover own IP address (default: 1 when listening and no -externalip) Descubrir dirección IP propia (predeterminado: 1 al escuchar sin -externalip) - - Do not load the wallet and disable wallet RPC calls - - Do you want to rebuild the block database now? ¿Quieres reconstruir la base de datos de bloques ahora? @@ -2948,22 +2476,6 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Failed to write undo data No se han podido escribir los datos de deshacer - - Fee per kB to add to transactions you send - Donación por KB añadida a las transacciones que envíe - - - Fees smaller than this are considered zero fee (for relaying) (default: - - - - Find peers using DNS lookup (default: 1 unless -connect) - Encontrar pares mediante búsqueda de DNS (predeterminado: 1 salvo con -connect) - - - Force safe mode (default: 0) - - Generate coins (default: 0) Generar monedas (por defecto: 0) @@ -2976,17 +2488,13 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. If <category> is not supplied, output all debugging information. Si no se proporciona <category>, mostrar toda la depuración - - Importing... - - Incorrect or no genesis block found. Wrong datadir for network? Incorrecto o bloque de génesis no encontrado. Datadir equivocada para la red? - Invalid -onion address: '%s' - Dirección -onion inválida: '%s' + Invalid -onion address: '%s' + Dirección -onion inválida: '%s' Not enough file descriptors available. @@ -2996,22 +2504,10 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Prepend debug output with timestamp (default: 1) Anteponer marca temporal a la información de depuración (por defecto: 1) - - RPC client options: - Opciones para cliente RPC: - Rebuild block chain index from current blk000??.dat files Reconstruir el índice de la cadena de bloques a partir de los archivos blk000??.dat actuales - - Select SOCKS version for -proxy (4 or 5, default: 5) - Seleccionar version de SOCKS para -proxy (4 o 5, por defecto: 5) - - - Set database cache size in megabytes (%d to %d, default: %d) - - Set maximum block size in bytes (default: %d) Establecer tamaño máximo de bloque en bytes (por defecto: %d) @@ -3024,18 +2520,6 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Specify wallet file (within data directory) Especificar archivo de monedero (dentro del directorio de datos) - - Spend unconfirmed change when sending transactions (default: 1) - - - - This is intended for regression testing tools and app development. - - - - Usage (deprecated, use bitcoin-cli): - Uso (desaconsejado, usar bitcoin-cli) - Verifying blocks... Verificando bloques... @@ -3044,22 +2528,10 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Verifying wallet... Verificando monedero... - - Wait for RPC server to start - Espere a que se inicie el servidor RPC - Wallet %s resides outside data directory %s El monedero %s se encuentra fuera del directorio de datos %s - - Wallet options: - - - - Warning: Deprecated argument -debugnet ignored, use -debug=net - Aviso: Argumento -debugnet anticuado, utilice -debug=net - You need to rebuild the database using -reindex to change -txindex Usted necesita reconstruir la base de datos utilizando -reindex para cambiar -txindex @@ -3068,10 +2540,6 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Imports blocks from external blk000??.dat file Importa los bloques desde un archivo blk000??.dat externo - - Cannot obtain a lock on data directory %s. Bitcoin Core is probably already running. - - Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message) Ejecutar un comando cuando se reciba una alerta importante o cuando veamos un fork demasiado largo (%s en cmd se reemplazará por el mensaje) @@ -3089,20 +2557,12 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Información - Invalid amount for -minrelaytxfee=<amount>: '%s' - Inválido por el monto -minrelaytxfee=<amount>: '%s' - - - Invalid amount for -mintxfee=<amount>: '%s' - Inválido por el monto -mintxfee=<amount>: '%s' + Invalid amount for -minrelaytxfee=<amount>: '%s' + Inválido por el monto -minrelaytxfee=<amount>: '%s' - Limit size of signature cache to <n> entries (default: 50000) - - - - Log transaction priority and fee per kB when mining blocks (default: 0) - + Invalid amount for -mintxfee=<amount>: '%s' + Inválido por el monto -mintxfee=<amount>: '%s' Maintain a full transaction index (default: 0) @@ -3124,42 +2584,6 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Only connect to nodes in network <net> (IPv4, IPv6 or Tor) Conectarse solo a nodos de la red <net> (IPv4, IPv6 o Tor) - - Print block on startup, if found in block index - - - - Print block tree on startup (default: 0) - - - - RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions) - - - - RPC server options: - - - - Randomly drop 1 of every <n> network messages - - - - Randomly fuzz 1 of every <n> network messages - - - - Run a thread to flush wallet periodically (default: 1) - - - - SSL options: (see the Bitcoin Wiki for SSL setup instructions) - Opciones SSL: (ver la Bitcoin Wiki para instrucciones de configuración SSL) - - - Send command to Bitcoin Core - - Send trace/debug info to console instead of debug.log file Enviar información de trazas/depuración a la consola en lugar de al archivo debug.log @@ -3168,18 +2592,6 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Set minimum block size in bytes (default: 0) Establecer tamaño mínimo de bloque en bytes (predeterminado: 0) - - Sets the DB_PRIVATE flag in the wallet db environment (default: 1) - - - - Show all debugging options (usage: --help -help-debug) - - - - Show benchmark information (default: 0) - - Shrink debug.log file on client startup (default: 1 when no -debug) Reducir el archivo debug.log al iniciar el cliente (predeterminado: 1 sin -debug) @@ -3192,10 +2604,6 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Specify connection timeout in milliseconds (default: 5000) Especificar el tiempo máximo de conexión en milisegundos (predeterminado: 5000) - - Start Bitcoin Core Daemon - - System error: Error de sistema: @@ -3233,18 +2641,6 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Warning: This version is obsolete, upgrade required! Aviso: Esta versión es obsoleta, actualización necesaria! - - Zapping all transactions from wallet... - - - - on startup - - - - version - versión - wallet.dat corrupt, salvage failed wallet.dat corrupto. Ha fallado la recuperación. @@ -3252,16 +2648,6 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Password for JSON-RPC connections Contraseña para las conexiones JSON-RPC - - - - Allow JSON-RPC connections from specified IP address - Permitir conexiones JSON-RPC desde la dirección IP especificada - - - - Send commands to node running on <ip> (default: 127.0.0.1) - Enviar comando al nodo situado en <ip> (predeterminado: 127.0.0.1) @@ -3301,10 +2687,6 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Este mensaje de ayuda - - Unable to bind to %s on this computer (bind returned error %d, %s) - No es posible conectar con %s en este sistema (bind ha dado el error %d, %s) - Allow DNS lookups for -addnode, -seednode and -connect Permitir búsquedas DNS para -addnode, -seednode y -connect @@ -3317,41 +2699,29 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Error loading wallet.dat: Wallet corrupted Error al cargar wallet.dat: el monedero está dañado - - Error loading wallet.dat: Wallet requires newer version of Bitcoin - Error al cargar wallet.dat: El monedero requiere una versión más reciente de Bitcoin - - - Wallet needed to be rewritten: restart Bitcoin to complete - El monedero ha necesitado ser reescrito. Reinicie Bitcoin para completar el proceso - Error loading wallet.dat Error al cargar wallet.dat - Invalid -proxy address: '%s' - Dirección -proxy inválida: '%s' + Invalid -proxy address: '%s' + Dirección -proxy inválida: '%s' - Unknown network specified in -onlynet: '%s' - La red especificada en -onlynet '%s' es desconocida + Unknown network specified in -onlynet: '%s' + La red especificada en -onlynet '%s' es desconocida - Unknown -socks proxy version requested: %i - Solicitada versión de proxy -socks desconocida: %i + Cannot resolve -bind address: '%s' + No se puede resolver la dirección de -bind: '%s' - Cannot resolve -bind address: '%s' - No se puede resolver la dirección de -bind: '%s' + Cannot resolve -externalip address: '%s' + No se puede resolver la dirección de -externalip: '%s' - Cannot resolve -externalip address: '%s' - No se puede resolver la dirección de -externalip: '%s' - - - Invalid amount for -paytxfee=<amount>: '%s' - Cantidad inválida para -paytxfee=<amount>: '%s' + Invalid amount for -paytxfee=<amount>: '%s' + Cantidad inválida para -paytxfee=<amount>: '%s' Invalid amount @@ -3397,13 +2767,5 @@ Por ejemplo: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Error Error - - You must set rpcpassword=<password> in the configuration file: -%s -If the file does not exist, create it with owner-readable-only file permissions. - Tiene que establecer rpcpassword=<contraseña> en el fichero de configuración: ⏎ -%s ⏎ -Si el archivo no existe, créelo con permiso de lectura solamente del propietario. - \ No newline at end of file -- cgit v1.2.3