From f9645ba80a004d87b9094b5348ab744e6c8d585e Mon Sep 17 00:00:00 2001 From: "Wladimir J. van der Laan" Date: Tue, 28 Apr 2015 09:47:26 +0200 Subject: qt: translation update --- src/qt/locale/bitcoin_en.ts | 921 +++++++++++++++++++++++++------------------- 1 file changed, 518 insertions(+), 403 deletions(-) (limited to 'src/qt/locale/bitcoin_en.ts') diff --git a/src/qt/locale/bitcoin_en.ts b/src/qt/locale/bitcoin_en.ts index 71c626be4b..2555cdbb62 100644 --- a/src/qt/locale/bitcoin_en.ts +++ b/src/qt/locale/bitcoin_en.ts @@ -1,12 +1,12 @@ - + AddressBookPage - Double-click to edit address or label - Double-click to edit address or label + Right-click to edit address or label + @@ -34,7 +34,7 @@ - + &Copy Address &Copy Address @@ -127,7 +127,7 @@ AddressTableModel - + Label Label @@ -215,7 +215,12 @@ Are you sure you wish to encrypt your wallet? - + + Bitcoin Core will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer. + + + + IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet. IMPORTANT: Any previous backups you have made of your wallet file should be replaced with the newly generated, encrypted wallet file. For security reasons, previous backups of the unencrypted wallet file will become useless as soon as you start using the new, encrypted wallet. @@ -237,12 +242,7 @@ - - Bitcoin will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer. - Bitcoin will close now to finish the encryption process. Remember that encrypting your wallet cannot fully protect your bitcoins from being stolen by malware infecting your computer. - - - + @@ -286,32 +286,32 @@ BitcoinGUI - + Sign &message... Sign &message... - + Synchronizing with network... Synchronizing with network... - + &Overview &Overview - + Node - + Show general overview of wallet Show general overview of wallet - + &Transactions &Transactions @@ -321,7 +321,7 @@ Browse transaction history - + E&xit E&xit @@ -331,13 +331,12 @@ Quit application - - + About &Qt About &Qt - + Show information about Qt Show information about Qt @@ -377,7 +376,7 @@ - + Bitcoin Core client @@ -392,17 +391,12 @@ Reindexing blocks on disk... - + Send coins to a Bitcoin address Send coins to a Bitcoin address - - Modify configuration options for Bitcoin - Modify configuration options for Bitcoin - - - + Backup wallet to another location Backup wallet to another location @@ -427,32 +421,32 @@ &Verify message... - + Bitcoin Bitcoin - + Wallet Wallet - + &Send &Send - + &Receive &Receive - + Show information about Bitcoin Core - + &Show / Hide &Show / Hide @@ -477,7 +471,7 @@ Verify messages to ensure they were signed with specified Bitcoin addresses - + &File &File @@ -497,22 +491,27 @@ Tabs toolbar - + Bitcoin Core Bitcoin Core - + Request payments (generates QR codes and bitcoin: URIs) - + &About Bitcoin Core - + + Modify configuration options for Bitcoin Core + + + + Show the list of used sending addresses and labels @@ -532,12 +531,12 @@ - + Show the Bitcoin Core help message to get a list with possible Bitcoin command-line options - + %n active connection(s) to Bitcoin network %n active connection to Bitcoin network @@ -550,7 +549,7 @@ No block source available... - + %n hour(s) %n hour @@ -636,7 +635,37 @@ Catching up... - + + Date: %1 + + + + + + Amount: %1 + + + + + + Type: %1 + + + + + + Label: %1 + + + + + + Address: %1 + + + + + Sent transaction Sent transaction @@ -646,20 +675,7 @@ Incoming transaction - - Date: %1 -Amount: %2 -Type: %3 -Address: %4 - - Date: %1 -Amount: %2 -Type: %3 -Address: %4 - - - - + Wallet is <b>encrypted</b> and currently <b>unlocked</b> Wallet is <b>encrypted</b> and currently <b>unlocked</b> @@ -672,7 +688,7 @@ Address: %4 ClientModel - + Network Alert Network Alert @@ -775,7 +791,7 @@ Address: %4 - + Copy address Copy address @@ -841,7 +857,7 @@ Address: %4 - + highest @@ -896,7 +912,7 @@ Address: %4 - + Can vary +/- %1 satoshi(s) per input. @@ -1029,7 +1045,7 @@ Address: %4 FreespaceChecker - + A new data directory will be created. A new data directory will be created. @@ -1057,7 +1073,7 @@ Address: %4 HelpMessageDialog - + Bitcoin Core Bitcoin Core @@ -1078,7 +1094,7 @@ Address: %4 - + Command-line options @@ -1092,36 +1108,6 @@ Address: %4 command-line options command-line options - - - UI options - UI options - - - - Set language, for example "de_DE" (default: system locale) - Set language, for example "de_DE" (default: system locale) - - - - Start minimized - Start minimized - - - - Set SSL root certificates for payment request (default: -system-) - - - - - Show splash screen on startup (default: 1) - Show splash screen on startup (default: 1) - - - - Choose data directory on startup (default: 0) - Choose data directory on startup (default: 0) - Intro @@ -1228,17 +1214,7 @@ Address: %4 &Main - - Automatically start Bitcoin after logging in to the system. - Automatically start Bitcoin after logging in to the system. - - - - &Start Bitcoin on system login - &Start Bitcoin on system login - - - + Size of &database cache @@ -1268,7 +1244,17 @@ Address: %4 - + + Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Exit in the menu. + + + + + The user interface language can be set here. This setting will take effect after restarting Bitcoin Core. + + + + Third party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |. @@ -1299,7 +1285,17 @@ Address: %4 &Network - + + Automatically start Bitcoin Core after logging in to the system. + + + + + &Start Bitcoin Core on system login + + + + (0 = auto, <0 = leave that many cores free) @@ -1379,12 +1375,7 @@ Address: %4 &Minimize to the tray instead of the taskbar - - Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Quit in the menu. - Minimize instead of exit the application when the window is closed. When this option is enabled, the application will be closed only after selecting Quit in the menu. - - - + M&inimize on close M&inimize on close @@ -1399,12 +1390,7 @@ Address: %4 User Interface &language: - - The user interface language can be set here. This setting will take effect after restarting Bitcoin. - The user interface language can be set here. This setting will take effect after restarting Bitcoin. - - - + &Unit to show amounts in: &Unit to show amounts in: @@ -1429,12 +1415,12 @@ Address: %4 &Cancel - + default default - + none @@ -1559,7 +1545,7 @@ Address: %4 - + out of sync out of sync @@ -1568,7 +1554,7 @@ Address: %4 PaymentServer - + URI handling @@ -1580,49 +1566,46 @@ Address: %4 - + - + + + Payment request rejected - + Payment request network doesn't match client network. - - Payment request has expired. - - - - + Payment request is not initialized. - + Requested payment amount of %1 is too small (considered dust). - - - - + + + + Payment request error - + Cannot start bitcoin: click-to-pay handler - + Payment request fetch URL is invalid: %1 @@ -1642,17 +1625,38 @@ Address: %4 - + + Payment request expired. + + + + Unverified payment requests to custom payment scripts are unsupported. - + + + Invalid payment request. + + + + Refund from %1 + Payment request %1 is too large (%2 bytes, allowed %3 bytes). + + + + + Payment request DoS protection + + + + Error communicating with %1: %2 @@ -1686,7 +1690,7 @@ Address: %4 - Address/Hostname + Node/Service @@ -1698,17 +1702,17 @@ Address: %4 QObject - + Amount Amount - + Enter a Bitcoin address (e.g. %1) - + %1 d @@ -1724,21 +1728,12 @@ Address: %4 + %1 s - - NETWORK - - - - - UNKNOWN - - - - + None @@ -1807,11 +1802,12 @@ Address: %4 + N/A N/A - + Client version Client version @@ -1871,7 +1867,12 @@ Address: %4 Current number of blocks - + + Open the Bitcoin Core debug log file from the current data directory. This can take a few seconds for large log files. + + + + Received @@ -1887,8 +1888,8 @@ Address: %4 - - + + Select a peer to view detailed information. @@ -1958,7 +1959,12 @@ Address: %4 - + + Time Offset + + + + Last block time Last block time @@ -1988,7 +1994,7 @@ Address: %4 - + In: @@ -2008,19 +2014,14 @@ Address: %4 Debug log file - - Open the Bitcoin debug log file from the current data directory. This can take a few seconds for large log files. - Open the Bitcoin debug log file from the current data directory. This can take a few seconds for large log files. - - - + Clear console Clear console - - Welcome to the Bitcoin RPC console. - Welcome to the Bitcoin RPC console. + + Welcome to the Bitcoin Core RPC console. + @@ -2064,7 +2065,7 @@ Address: %4 - + Inbound @@ -2176,7 +2177,7 @@ Address: %4 - + Copy label Copy label @@ -2262,7 +2263,7 @@ Address: %4 RecentRequestsTableModel - + Date Date @@ -2301,7 +2302,7 @@ Address: %4 SendCoinsDialog - + Send Coins Send Coins @@ -2381,32 +2382,28 @@ Address: %4 - + collapse fee-settings - - Minimize - - - - - If the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte. + + per kilobyte - - per kilobyte + + + If the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "total at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte. - - If the custom fee is set to 1000 satoshis and the transaction is only 250 bytes, then "per kilobyte" only pays 250 satoshis in fee, while "total at least" pays 1000 satoshis. For transactions bigger than a kilobyte both pay by kilobyte. + + Hide - + total at least @@ -2502,12 +2499,12 @@ Address: %4 S&end - + Confirm send coins Confirm send coins - + @@ -2515,7 +2512,7 @@ Address: %4 - + Copy quantity @@ -2560,7 +2557,7 @@ Address: %4 - + The recipient address is not valid, please recheck. The recipient address is not valid, please recheck. @@ -2596,21 +2593,29 @@ Address: %4 - A fee higher than %1 is considered an insanely high fee. + A fee higher than %1 is considered an absurdly high fee. - - Pay only the minimum fee of %1 + + Payment request expired. + + + Estimated to begin confirmation within %n block(s). + + + + + - - Estimated to begin confirmation within %1 block(s). + + Pay only the minimum fee of %1 - + Warning: Invalid Bitcoin address @@ -2625,7 +2630,7 @@ Address: %4 - + Copy dust @@ -2643,29 +2648,29 @@ Address: %4 SendCoinsEntry - - + + A&mount: A&mount: - + Pay &To: Pay &To: - + Enter a label for this address to add it to your address book Enter a label for this address to add it to your address book - + &Label: &Label: - + Choose previously used address @@ -2680,7 +2685,7 @@ Address: %4 - + Alt+A Alt+A @@ -2690,44 +2695,54 @@ Address: %4 Paste address from clipboard - + Alt+P Alt+P - + Remove this entry - - Message: + + The fee will be deducted from the amount being sent. The recipient will receive less bitcoins than you enter in the amount field. If multiple recipients are selected, the fee is split equally. - - This is a verified payment request. + + S&ubtract fee from amount - - Enter a label for this address to add it to the list of used addresses + + Message: - - A message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network. + + This is an unauthenticated payment request. - - This is an unverified payment request. + + This is an authenticated payment request. - + + Enter a label for this address to add it to the list of used addresses + + + + + A message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network. + + + + Pay To: @@ -2742,7 +2757,7 @@ Address: %4 ShutdownWindow - + Bitcoin Core is shutting down... @@ -2766,8 +2781,8 @@ Address: %4 - You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. - You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. + You can sign messages/agreements with your addresses to prove you can receive bitcoins sent to them. Be careful not to sign anything vague or random, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. + @@ -2839,8 +2854,8 @@ Address: %4 - Enter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. - Enter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. + Enter the receiver's address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Note that this only proves the signing party receives with the address, it cannot prove sendership of any transaction! + @@ -2863,7 +2878,7 @@ Address: %4 Reset all verify message fields - + Click "Sign Message" to generate signature Click "Sign Message" to generate signature @@ -2937,7 +2952,7 @@ Address: %4 SplashScreen - + Bitcoin Core Bitcoin Core @@ -2947,7 +2962,7 @@ Address: %4 - + [testnet] [testnet] @@ -2963,7 +2978,7 @@ Address: %4 TransactionDesc - + Open until %1 Open until %1 @@ -3187,7 +3202,7 @@ Address: %4 TransactionTableModel - + Date Date @@ -3196,11 +3211,6 @@ Address: %4 Type Type - - - Address - Address - Immature (%1 confirmations, will be available after %2) @@ -3240,7 +3250,12 @@ Address: %4 - + + Label + Label + + + Unconfirmed @@ -3290,7 +3305,7 @@ Address: %4 (n/a) - + Transaction status. Hover over this field to show number of confirmations. Transaction status. Hover over this field to show number of confirmations. @@ -3311,8 +3326,8 @@ Address: %4 - Destination address of transaction. - Destination address of transaction. + User-defined intent/purpose of the transaction. + @@ -3323,7 +3338,7 @@ Address: %4 TransactionView - + All All @@ -3518,7 +3533,7 @@ Address: %4 WalletModel - + Send Coins Send Coins @@ -3526,7 +3541,7 @@ Address: %4 WalletView - + &Export &Export @@ -3536,7 +3551,7 @@ Address: %4 Export the data in the current tab to a file - + Backup Wallet Backup Wallet @@ -3569,82 +3584,62 @@ Address: %4 bitcoin-core - + Options: Options: - + Specify data directory Specify data directory - + Connect to a node to retrieve peer addresses, and disconnect Connect to a node to retrieve peer addresses, and disconnect - + Specify your own public address Specify your own public address - + Accept command line and JSON-RPC commands Accept command line and JSON-RPC commands - + Run in the background as a daemon and accept commands Run in the background as a daemon and accept commands - + Use the test network Use the test network - + Accept connections from outside (default: 1 if no -proxy or -connect) Accept connections from outside (default: 1 if no -proxy or -connect) - - %s, you must set a rpcpassword in the configuration file: -%s -It is recommended you use the following random password: -rpcuser=bitcoinrpc -rpcpassword=%s -(you do not need to remember this password) -The username and password MUST NOT be the same. -If the file does not exist, create it with owner-readable-only file permissions. -It is also recommended to set alertnotify so you are notified of problems; -for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com - - %s, you must set a rpcpassword in the configuration file: -%s -It is recommended you use the following random password: -rpcuser=bitcoinrpc -rpcpassword=%s -(you do not need to remember this password) -The username and password MUST NOT be the same. -If the file does not exist, create it with owner-readable-only file permissions. -It is also recommended to set alertnotify so you are notified of problems; -for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com - - - - + Bind to given address and always listen on it. Use [host]:port notation for IPv6 Bind to given address and always listen on it. Use [host]:port notation for IPv6 - + + Continuously rate-limit free transactions to <n>*1000 bytes per minute (default: %u) + + + + Delete all wallet transactions and only recover those parts of the blockchain through -rescan on startup - + Distributed under the MIT software license, see the accompanying file COPYING or <http://www.opensource.org/licenses/mit-license.php>. @@ -3654,17 +3649,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - - Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. - Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. - - - - Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds! - Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds! - - - + Execute command when a wallet transaction changes (%s in cmd is replaced by TxID) Execute command when a wallet transaction changes (%s in cmd is replaced by TxID) @@ -3674,27 +3659,27 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - + Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d) - + This is a pre-release test build - use at your own risk - do not use for mining or merchant applications This is a pre-release test build - use at your own risk - do not use for mining or merchant applications - + Unable to bind to %s on this computer. Bitcoin Core is probably already running. - + Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction. Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction. - + Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues. Warning: The network does not appear to fully agree! Some miners appear to be experiencing issues. @@ -3719,7 +3704,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - + (default: 1) @@ -3729,7 +3714,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - + Attempt to recover private keys from a corrupt wallet.dat Attempt to recover private keys from a corrupt wallet.dat @@ -3739,7 +3724,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Block creation options: - + Connect only to the specified node(s) Connect only to the specified node(s) @@ -3760,11 +3745,6 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - Discover own IP address (default: 1 when listening and no -externalip) - Discover own IP address (default: 1 when listening and no -externalip) - - - Do not load the wallet and disable wallet RPC calls @@ -3794,7 +3774,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Error opening block database - + Error: A fatal internal error occured, see debug.log for details @@ -3805,11 +3785,6 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - Error: Wallet locked, unable to create transaction! - Error: Wallet locked, unable to create transaction! - - - Failed to listen on any port. Use -listen=0 if you want this. Failed to listen on any port. Use -listen=0 if you want this. @@ -3844,32 +3819,42 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - + + Prune cannot be configured with a negative value. + + + + + Prune mode is incompatible with -txindex. + + + + Rebuild block chain index from current blk000??.dat files Rebuild block chain index from current blk000??.dat files - + Set database cache size in megabytes (%d to %d, default: %d) - + Set maximum block size in bytes (default: %d) - + Specify wallet file (within data directory) Specify wallet file (within data directory) - + This is intended for regression testing tools and app development. - + Use UPnP to map the listening port (default: %u) @@ -3899,12 +3884,12 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. You need to rebuild the database using -reindex to change -txindex - + Imports blocks from external blk000??.dat file Imports blocks from external blk000??.dat file - + Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times @@ -3929,22 +3914,22 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - - Continuously rate-limit free transactions to <n>*1000 bytes per minute (default:%u) + + Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality) - - Create new files with system default permissions, instead of umask 077 (only effective with disabled wallet functionality) + + Discover own IP addresses (default: 1 when listening and no -externalip or -proxy) - + Error: Listening for incoming connections failed (listen returned error %s) - + Error: Unsupported argument -socks found. Setting SOCKS version isn't possible anymore, only SOCKS5 proxies are supported. @@ -3964,17 +3949,52 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - + + If paytxfee is not set, include enough fee so transactions begin confirmation on average within n blocks (default: %u) + + + + + Invalid amount for -maxtxfee=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions) + + + + Maximum size of data in data carrier transactions we relay and mine (default: %u) + + + Maximum total fees to use in a single wallet transaction, setting too low may abort large transactions (default: %s) + + + Prune configured below the minimum of %d MB. Please use a higher number. + + + + Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect) + Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u) + + + + + Reduce storage requirements by pruning (deleting) old blocks. This mode disables wallet support and is incompatible with -txindex. + + + + + Require high priority for relaying free or low-fee transactions (default: %u) + + + + Set maximum size of high-priority/low-fee transactions in bytes (default: %d) @@ -3984,27 +4004,97 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - + + The transaction amount is too small to send after the fee has been deducted + + + + This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit <https://www.openssl.org/> and cryptographic software written by Eric Young and UPnP software written by Thomas Bernard. - + + To use bitcoind, or the -server option to bitcoin-qt, you must set an rpcpassword in the configuration file: +%s +It is recommended you use the following random password: +rpcuser=bitcoinrpc +rpcpassword=%s +(you do not need to remember this password) +The username and password MUST NOT be the same. +If the file does not exist, create it with owner-readable-only file permissions. +It is also recommended to set alertnotify so you are notified of problems; +for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo.com + + + + + + Warning: -maxtxfee is set very high! Fees this large could be paid on a single transaction. + + + + Warning: Please check that your computer's date and time are correct! If your clock is wrong Bitcoin Core will not work properly. + + + Warning: Reverting this setting requires re-downloading the entire blockchain. + + Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway - - Cannot resolve -whitebind address: '%s' + + You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain + + + + + (default: %u) + + + + + (default: 0 = disable pruning blocks, + >%u = target size in MiB to use for block files) + + + + + Accept public REST requests (default: %u) + + + + + Allow self signed root certificates (default: 0) + + + + + Can't run with a wallet in prune mode. + + + + + Cannot resolve -whitebind address: '%s' + + + + + Choose data directory on startup (default: 0) + Choose data directory on startup (default: 0) + + + Connect through SOCKS5 proxy @@ -4019,17 +4109,22 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - + Error loading wallet.dat: Wallet requires newer version of Bitcoin Core - + + Error reading from database, shutting down. + + + + Error: Unsupported argument -tor found, use -onion. - + Fee (in BTC/kB) to add to transactions you send (default: %s) @@ -4045,6 +4140,11 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. + Invalid amount for -maxtxfee=<amount>: '%s' + + + + Invalid amount for -minrelaytxfee=<amount>: '%s' Invalid amount for -minrelaytxfee=<amount>: '%s' @@ -4059,22 +4159,17 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - + Invalid netmask specified in -whitelist: '%s' - - - Keep at most <n> unconnectable blocks in memory (default: %u) - - Keep at most <n> unconnectable transactions in memory (default: %u) - + Need to specify a port with -whitebind: '%s' @@ -4084,18 +4179,18 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - - Print block on startup, if found in block index + + RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions) - - RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions) + + RPC server options: - RPC server options: + RPC support for HTTP persistent connections (default: %d) @@ -4119,10 +4214,25 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - + + Set SSL root certificates for payment request (default: -system-) + + + + + Set language, for example "de_DE" (default: system locale) + Set language, for example "de_DE" (default: system locale) + + + Show all debugging options (usage: --help -help-debug) + + + Show splash screen on startup (default: 1) + Show splash screen on startup (default: 1) + Shrink debug.log file on client startup (default: 1 when no -debug) @@ -4134,12 +4244,22 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Signing transaction failed - + + Start minimized + Start minimized + + + + The transaction amount is too small to pay the fee + + + + This is experimental software. - + Transaction amount too small Transaction amount too small @@ -4148,11 +4268,21 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Transaction amounts must be positive Transaction amounts must be positive + + + Transaction too large for fee policy + + Transaction too large Transaction too large + + + UI Options: + + Unable to bind to %s on this computer (bind returned error %s) @@ -4209,57 +4339,57 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. wallet.dat corrupt, salvage failed - + Password for JSON-RPC connections Password for JSON-RPC connections - + Execute command when the best block changes (%s in cmd is replaced by block hash) Execute command when the best block changes (%s in cmd is replaced by block hash) - + Upgrade wallet to latest format Upgrade wallet to latest format - + Rescan the block chain for missing wallet transactions Rescan the block chain for missing wallet transactions - + Use OpenSSL (https) for JSON-RPC connections Use OpenSSL (https) for JSON-RPC connections - + This help message This help message - + Allow DNS lookups for -addnode, -seednode and -connect Allow DNS lookups for -addnode, -seednode and -connect - + Loading addresses... Loading addresses... - + Error loading wallet.dat: Wallet corrupted Error loading wallet.dat: Wallet corrupted - + (1 = keep tx meta data e.g. account owner and payment request information, 2 = drop tx meta data) - + Flush database activity from memory pool to disk log every <n> megabytes (default: %u) @@ -4269,12 +4399,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - - If paytxfee is not set, include enough fee so transactions are confirmed on average within n blocks (default: %u) - - - - + Log transaction priority and fee per kB when mining blocks (default: %u) @@ -4284,7 +4409,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - + Number of seconds to keep misbehaving peers from reconnecting (default: %u) @@ -4294,32 +4419,32 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - + Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s) - + (default: %s) - + Acceptable ciphers (default: %s) - + Always query for peer addresses via DNS lookup (default: %u) - + Disable safemode, override a real safe mode event (default: %u) - + Error loading wallet.dat Error loading wallet.dat @@ -4349,7 +4474,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Invalid -proxy address: '%s' - + Limit size of signature cache to <n> entries (default: %u) @@ -4368,6 +4493,11 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Maintain at most <n> connections to peers (default: %u) + + + Make the wallet broadcast transactions + + Maximum per-connection receive buffer, <n>*1000 bytes (default: %u) @@ -4389,12 +4519,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - - Print block tree on startup (default: %u) - - - - + Relay and mine data carrier transactions (default: %u) @@ -4419,12 +4544,12 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - + Set key pool size to <n> (default: %u) - + Set minimum block size in bytes (default: %u) @@ -4439,7 +4564,7 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - + Specify configuration file (default: %s) @@ -4459,22 +4584,22 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. - + Stop running after importing blocks from disk (default: %u) - + Threshold for disconnecting misbehaving peers (default: %u) - + Unknown network specified in -onlynet: '%s' Unknown network specified in -onlynet: '%s' - + Cannot resolve -bind address: '%s' Cannot resolve -bind address: '%s' @@ -4484,37 +4609,32 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Cannot resolve -externalip address: '%s' - + Invalid amount for -paytxfee=<amount>: '%s' Invalid amount for -paytxfee=<amount>: '%s' - - - Invalid amount - Invalid amount - Insufficient funds Insufficient funds - + Loading block index... Loading block index... - + Add a node to connect to and attempt to keep the connection open Add a node to connect to and attempt to keep the connection open - + Loading wallet... Loading wallet... - + Cannot downgrade wallet Cannot downgrade wallet @@ -4524,22 +4644,17 @@ for example: alertnotify=echo %%s | mail -s "Bitcoin Alert" admin@foo. Cannot write default address - + Rescanning... Rescanning... - + Done loading Done loading - - To use the %s option - To use the %s option - - - + Error Error -- cgit v1.2.3