From d001476cbc7e9511e149e5ab2e30b258e65ace89 Mon Sep 17 00:00:00 2001 From: Philip Kaufmann Date: Thu, 24 Jan 2013 09:36:40 +0100 Subject: full translations update - fetch current translations from Transifex - update bitcoinstrings.cpp and bitcoin_en.ts --- src/qt/locale/bitcoin_da.ts | 613 ++++++++++++++++++++++++++------------------ 1 file changed, 362 insertions(+), 251 deletions(-) (limited to 'src/qt/locale/bitcoin_da.ts') diff --git a/src/qt/locale/bitcoin_da.ts b/src/qt/locale/bitcoin_da.ts index 9f327e71db..01f9c8a54b 100644 --- a/src/qt/locale/bitcoin_da.ts +++ b/src/qt/locale/bitcoin_da.ts @@ -298,17 +298,17 @@ Produktet indeholder software som er udviklet af OpenSSL Project til brug i Open BitcoinGUI - + Sign &message... - + Synchronizing with network... Synkroniserer med netværk ... - + &Overview &Oversigt @@ -318,7 +318,7 @@ Produktet indeholder software som er udviklet af OpenSSL Project til brug i Open Vis generel oversigt over tegnebog - + &Transactions &Transaktioner @@ -328,7 +328,7 @@ Produktet indeholder software som er udviklet af OpenSSL Project til brug i Open Gennemse transaktionshistorik - + &Address Book &Adressebog @@ -338,7 +338,7 @@ Produktet indeholder software som er udviklet af OpenSSL Project til brug i Open Rediger listen over gemte adresser og etiketter - + &Receive coins &Modtag coins @@ -348,12 +348,12 @@ Produktet indeholder software som er udviklet af OpenSSL Project til brug i Open Vis listen over adresser for at modtage betalinger - + &Send coins &Send coins - + E&xit &Luk @@ -383,7 +383,7 @@ Produktet indeholder software som er udviklet af OpenSSL Project til brug i Open &Indstillinger ... - + &Encrypt Wallet... &Kryptér tegnebog... @@ -397,43 +397,43 @@ Produktet indeholder software som er udviklet af OpenSSL Project til brug i Open &Change Passphrase... &Skift adgangskode... + + + Importing blocks from disk... + + + + + Reindexing blocks on disk... + + - + ~%n block(s) remaining - - Downloaded %1 of %2 blocks of transaction history (%3% done). - Downloadet %1 af %2 blokke af transaktionshistorie (%3% done). - - - + &Export... &Eksporter... - + Send coins to a Bitcoin address Send coins til en bitcoinadresse - + Modify configuration options for Bitcoin Rediger konfigurationsindstillinger af bitcoin - + Export the data in the current tab to a file Eksportér den aktuelle visning til en fil - - Encrypt or decrypt wallet - Kryptér eller dekryptér tegnebog - - - + Backup wallet to another location @@ -443,7 +443,7 @@ Produktet indeholder software som er udviklet af OpenSSL Project til brug i Open Skift kodeord anvendt til tegnebogskryptering - + &Debug window @@ -453,22 +453,23 @@ Produktet indeholder software som er udviklet af OpenSSL Project til brug i Open - + &Verify message... - + + Bitcoin Bitcoin - + Wallet tegnebog - + &About Bitcoin &Om Bitcoin @@ -478,7 +479,27 @@ Produktet indeholder software som er udviklet af OpenSSL Project til brug i Open - + + Show or hide the main Window + + + + + Encrypt the private keys that belong to your wallet + + + + + Sign messages with your Bitcoin addresses to prove you own them + + + + + Verify messages to ensure they were signed with specified Bitcoin addresses + + + + &File &Fil @@ -504,28 +525,62 @@ Produktet indeholder software som er udviklet af OpenSSL Project til brug i Open - + [testnet] [testnet] - - + Bitcoin client - + %n active connection(s) to Bitcoin network %n aktiv(e) forbindelse(r) til Bitcoinnetværket%n aktiv(e) forbindelse(r) til Bitcoinnetværket - - Downloaded %1 blocks of transaction history. - Downloadet %1 blokke af transaktionshistorie. + + Processed %1 of %2 blocks of transaction history (%3% done). + + + + + Processed %1 blocks of transaction history. + + + + + Error + + + + + Warning + + + + + Information + + + + + This transaction is over the size limit. You can still send it for a fee of %1, which goes to the nodes that process your transaction and helps to support the network. Do you want to pay the fee? + + + + + Backup Successful + + + + + The wallet data was successfully saved to the new location. + - + %n second(s) ago %n sekund(er) siden%n sekund(er) siden @@ -560,22 +615,17 @@ Produktet indeholder software som er udviklet af OpenSSL Project til brug i Open Sidst modtagne blok blev genereret %1. - - This transaction is over the size limit. You can still send it for a fee of %1, which goes to the nodes that process your transaction and helps to support the network. Do you want to pay the fee? - Denne transaktion er over størrelsesbegrænsningen. Du kan stadig sende den for et gebyr på %1 som går til de noder der behandler din transaktion, og som hjælper med at støtte netværket. Ønsker du at betale gebyret? - - - + Confirm transaction fee - + Sent transaction Afsendt transaktion - + Incoming transaction Indgående transaktion @@ -593,19 +643,19 @@ Adresse: %4 - - + + URI handling - - + + URI can not be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters. - + Wallet is <b>encrypted</b> and currently <b>unlocked</b> Tegnebog er <b>krypteret</b> og i øjeblikket <b>ulåst</b> @@ -643,7 +693,7 @@ Adresse: %4 ClientModel - + Network Alert @@ -794,17 +844,17 @@ Adresse: %4 &Start Bitcoin når systemet startes - - Detach block and address databases at shutdown. This means they can be moved to another data directory, but it slows down shutdown. The wallet is always detached. + + Reset all client options to default. - &Detach databases at shutdown + &Reset Options - + &Network @@ -939,7 +989,22 @@ Adresse: %4 - + + Confirm options reset + + + + + Some settings may require a client restart to take effect. + + + + + Do you want to proceed? + + + + Warning Advarsel @@ -964,7 +1029,7 @@ Adresse: %4 Formular - + The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet. @@ -1020,7 +1085,7 @@ Adresse: %4 Samlede antal transaktioner i tegnebogen - + out of sync @@ -1101,7 +1166,7 @@ Adresse: %4 - + N/A @@ -1216,7 +1281,7 @@ Adresse: %4 Ryd - + Welcome to the Bitcoin RPC console. @@ -1253,7 +1318,7 @@ Adresse: %4 Add &Recipient - + &Tilføj modtager @@ -1283,7 +1348,7 @@ Adresse: %4 S&end - + &Afsend @@ -1332,8 +1397,8 @@ Adresse: %4 - Error: Transaction creation failed. - Fejl: Oprettelse af transaktionen mislykkedes. + Error: Transaction creation failed! + @@ -1359,23 +1424,23 @@ Adresse: %4 Betal &Til: - + + The address to send the payment to (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) + + + + Enter a label for this address to add it to your address book Indtast en etiket for denne adresse for at føje den til din adressebog - + &Label: &Etiket: - - The address to send the payment to (e.g. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - Adresse som betalingen skal sendes til (f.eks. 1NS17iag9jJgTHD1VXjvLCEnZuQ3rJDE9L) - - - + Choose address from address book Vælg adresse fra adressebog @@ -1414,12 +1479,11 @@ Adresse: %4 - &Sign Message - + You can sign messages with your addresses to prove you own them. Be careful not to sign anything vague, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. @@ -1430,18 +1494,18 @@ Adresse: %4 - + Choose an address from the address book Vælg adresse fra adressebog - - + + Alt+A Alt+A - + Paste address from clipboard Indsæt adresse fra udklipsholderen @@ -1456,7 +1520,12 @@ Adresse: %4 - + + Signature + + + + Copy the current signature to the system clipboard @@ -1466,7 +1535,12 @@ Adresse: %4 - + + Sign &Message + + + + Reset all sign message fields @@ -1478,12 +1552,11 @@ Adresse: %4 - &Verify Message - + Enter the signing address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. @@ -1498,7 +1571,12 @@ Adresse: %4 - + + Verify &Message + + + + Reset all verify message fields @@ -1592,13 +1670,8 @@ Adresse: %4 Open until %1 Åben indtil %1 - - - Open for %n block(s) - - - + %1/offline @@ -1729,7 +1802,7 @@ Adresse: %4 - + Inputs @@ -1749,12 +1822,17 @@ Adresse: %4 - + , has not been successfully broadcast yet , er ikke blevet transmitteret endnu + + + Open for %n more block(s) + + - + unknown ukendt @@ -1796,8 +1874,8 @@ Adresse: %4 - Open for %n block(s) - Åben for %n blok(ke)Åben for %n blok(ke) + Open for %n more block(s) + @@ -2054,18 +2132,10 @@ Adresse: %4 til - - WalletModel - - - Sending... - Sender... - - bitcoin-core - + Bitcoin version Bitcoinversion @@ -2075,13 +2145,13 @@ Adresse: %4 Anvendelse: - + Send command to -server or bitcoind Send kommando til -server eller bitcoind - + List commands Liste over kommandoer @@ -2093,13 +2163,13 @@ Adresse: %4 - + Options: Indstillinger: - + Specify configuration file (default: bitcoin.conf) Angiv konfigurationsfil (standard: bitcoin.conf) @@ -2117,27 +2187,22 @@ Adresse: %4 - + Don't generate coins Generér ikke coins - + Specify data directory Angiv databibliotek - + Set database cache size in megabytes (default: 25) - - - Set database disk log size in megabytes (default: 100) - - Listen for connections on <port> (default: 8333 or testnet: 18333) @@ -2149,74 +2214,49 @@ Adresse: %4 - + Connect to a node to retrieve peer addresses, and disconnect - + Specify your own public address - - Bind to given address. Use [host]:port notation for IPv6 - - - - + Threshold for disconnecting misbehaving peers (default: 100) - + Number of seconds to keep misbehaving peers from reconnecting (default: 86400) - - An error occurred while setting up the RPC port %i for listening on IPv6, falling back to IPv4: %s - - - - + An error occurred while setting up the RPC port %u for listening on IPv4: %s - - Detach block and address databases. Increases shutdown time (default: 0) - - - - + Listen for JSON-RPC connections on <port> (default: 8332 or testnet: 18332) - + Lyt til JSON-RPC-forbindelser på <port> (standard: 8332 or testnet: 18332) - + Accept command line and JSON-RPC commands Accepter kommandolinje- og JSON-RPC-kommandoer - - Importing blockchain data file. - - - - - Importing bootstrap blockchain data file. - - - - + Run in the background as a daemon and accept commands Kør i baggrunden som en service, og acceptér kommandoer - + Use the test network Brug test-netværket @@ -2227,10 +2267,63 @@ Adresse: %4 Acceptér forbindelser udefra (default: 1 if no -proxy or -connect) - + + %s, you must set a rpcpassword in the configuration file: + %s +It is recommended you use the following random password: +rpcuser=bitcoinrpc +rpcpassword=%s +(you do not need to remember this password) +The username and password MUST NOT be the same. +If the file does not exist, create it with owner-readable-only file permissions. + + + + + + An error occurred while setting up the RPC port %u for listening on IPv6, falling back to IPv4: %s + + + + + Bind to given address and always listen on it. Use [host]:port notation for IPv6 + + + + + Cannot obtain a lock on data directory %s. Bitcoin is probably already running. + + + + + Corrupted block database detected. Please restart the client with -reindex. + + + + + Error initializing database environment %s! To recover, BACKUP THAT DIRECTORY, then remove everything from it except for wallet.dat. + + + + + Error: The transaction was rejected! This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. + + + + + Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds! + + + + Set maximum size of high-priority/low-fee transactions in bytes (default: 27000) + + + This is a pre-release test build - use at your own risk - do not use for mining or merchant applications + + Warning: -paytxfee is set very high! This is the transaction fee you will pay if you send a transaction. @@ -2247,7 +2340,22 @@ Adresse: %4 Advarsel: Undersøg venligst at din computers dato og klokkeslet er korrekt indstillet! Hvis der er fejl i disse vil Bitcoin ikke fungere korrekt. - + + Warning: error reading wallet.dat! All keys read correctly, but transaction data or address book entries might be missing or incorrect. + + + + + Warning: wallet.dat corrupt, data salvaged! Original wallet.dat saved as wallet.{timestamp}.bak in %s; if your balance or transactions are incorrect you should restore from a backup. + + + + + Attempt to recover private keys from a corrupt wallet.dat + + + + Block creation options: @@ -2262,7 +2370,27 @@ Adresse: %4 - + + Error loading block database + + + + + Error: Disk space is low! + + + + + Error: Transaction creation failed! + + + + + Error: Wallet locked, unable to create transaction! + + + + Failed to listen on any port. Use -listen=0 if you want this. @@ -2272,7 +2400,27 @@ Adresse: %4 - + + How thorough the block verification is (0-4, default: 3) + + + + + Importing blocks from block database... + + + + + Imports blocks from external blk000??.dat file + + + + + Information + + + + Invalid -tor address: '%s' Ugyldig -tor address: '%s' @@ -2286,6 +2434,11 @@ Adresse: %4 Maximum per-connection send buffer, <n>*1000 bytes (default: 1000) + + + Only accept block chain matching built-in checkpoints (default: 1) + + Only connect to nodes in network <net> (IPv4, IPv6 or Tor) @@ -2306,6 +2459,11 @@ Adresse: %4 Prepend debug output with timestamp + + + Rebuild blockchain index from current blk000??.dat files + + SSL options: (see the Bitcoin Wiki for SSL setup instructions) @@ -2327,7 +2485,7 @@ Adresse: %4 - + Set maximum block size in bytes (default: 250000) @@ -2368,9 +2526,9 @@ Adresse: %4 - - Warning: Disk space is low! - Advarsel: Diskplads er lav! + + Warning + @@ -2378,30 +2536,35 @@ Adresse: %4 - + + wallet.dat corrupt, salvage failed + + + + Password for JSON-RPC connections Password til JSON-RPC-forbindelser - + Allow JSON-RPC connections from specified IP address Tillad JSON-RPC-forbindelser fra bestemt IP-adresse - + Send commands to node running on <ip> (default: 127.0.0.1) Send kommandoer til node, der kører på <ip> (standard: 127.0.0.1) - + Execute command when the best block changes (%s in cmd is replaced by block hash) - + Upgrade wallet to latest format @@ -2412,34 +2575,24 @@ Adresse: %4 - + Rescan the block chain for missing wallet transactions Gennemsøg blokkæden for manglende tegnebogstransaktioner - + How many blocks to check at startup (default: 2500, 0 = all) - - How thorough the block verification is (0-6, default: 1) - - - - - Imports blocks from external blk000?.dat file - - - - + Use OpenSSL (https) for JSON-RPC connections Brug OpenSSL (https) for JSON-RPC-forbindelser - + Server certificate file (default: server.cert) Servercertifikat-fil (standard: server.cert) @@ -2451,39 +2604,29 @@ Adresse: %4 - + Acceptable ciphers (default: TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH) Acceptabele ciphers (standard: TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH) - + This help message Denne hjælpebesked - - Cannot obtain a lock on data directory %s. Bitcoin is probably already running. - Kan låse data-biblioteket %s. Bitcoin kører sikkert allerede. - - - - Bitcoin - Bitcoin - - - + Unable to bind to %s on this computer (bind returned error %d, %s) Kunne ikke binde sig til %s på denne computer (bind returned error %d, %s) - + Connect through socks proxy Tilslut via SOCKS proxy - + Allow DNS lookups for -addnode, -seednode and -connect Tillad DNS-opslag for addnode og connect @@ -2493,12 +2636,7 @@ Adresse: %4 Indlæser adresser... - - Error loading blkindex.dat - Fejl ved indlæsning af blkindex.dat - - - + Error loading wallet.dat: Wallet corrupted Fejl ved indlæsning af wallet.dat: Tegnebog ødelagt @@ -2508,17 +2646,27 @@ Adresse: %4 Fejl ved indlæsning af wallet.dat: Tegnebog kræver en nyere version af Bitcoin - + + Verifying block database integrity... + + + + + Verifying wallet integrity... + + + + Wallet needed to be rewritten: restart Bitcoin to complete - + Error loading wallet.dat Fejl ved indlæsning af wallet.dat - + Invalid -proxy address: '%s' Ugyldig -proxy adresse: '%s' @@ -2533,7 +2681,7 @@ Adresse: %4 - + Cannot resolve -bind address: '%s' @@ -2543,7 +2691,7 @@ Adresse: %4 - + Invalid amount for -paytxfee=<amount>: '%s' Ugyldigt beløb for -paytxfee=<amount>: '%s' @@ -2553,32 +2701,7 @@ Adresse: %4 - - Error: Wallet locked, unable to create transaction - - - - - Error: This transaction requires a transaction fee of at least %s because of its amount, complexity, or use of recently received funds - Denne transaktion er over størrelsesbegrænsningen. Du kan stadig sende den for et gebyr på %1 som går til de noder der behandler din transaktion, og som hjælper med at støtte netværket. Ønsker du at betale gebyret? - - - - Error: Transaction creation failed - Fejl: Oprettelse af transaktionen mislykkedes - - - - Sending... - Sender... - - - - Error: The transaction was rejected. This might happen if some of the coins in your wallet were already spent, such as if you used a copy of wallet.dat and coins were spent in the copy but not marked as spent here. - Fejl: Transaktionen blev afvist. Dette kan ske hvis nogle af dine coins i din tegnebog allerede var brugt, som hvis du brugte en kopi af wallet.dat og dine coins er blevet brugt i kopien, men ikke er markeret som brugt her. - - - + Invalid amount Ugyldigt beløb @@ -2598,12 +2721,12 @@ Adresse: %4 Tilføj en node til at forbinde til and attempt to keep the connection open - + Unable to bind to %s on this computer. Bitcoin is probably already running. Kunne ikke binde sig til %s på denne computer. Bitcoin kører sikkert allerede. - + Find peers using internet relay chat (default: 0) @@ -2618,7 +2741,7 @@ Adresse: %4 Indlæser tegnebog... - + Cannot downgrade wallet @@ -2633,39 +2756,27 @@ Adresse: %4 - + Rescanning... Genindlæser... - + Done loading Indlæsning gennemført - + To use the %s option - - %s, you must set a rpcpassword in the configuration file: - %s -It is recommended you use the following random password: -rpcuser=bitcoinrpc -rpcpassword=%s -(you do not need to remember this password) -If the file does not exist, create it with owner-readable-only file permissions. - - - - - + Error - + You must set rpcpassword=<password> in the configuration file: %s If the file does not exist, create it with owner-readable-only file permissions. -- cgit v1.2.3